diff options
Diffstat (limited to 'drivers/scsi/mpt3sas/mpi')
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2.h | 17 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h | 94 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_image.h | 506 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_init.h | 2 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_ioc.h | 359 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_pci.h | 11 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_raid.h | 2 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_sas.h | 2 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_tool.h | 72 |
9 files changed, 677 insertions, 388 deletions
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2.h b/drivers/scsi/mpt3sas/mpi/mpi2.h index 1e45268a78fc..7efd17a3c25b 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* - * Copyright 2000-2015 Avago Technologies. All rights reserved. + * Copyright 2000-2020 Broadcom Inc. All rights reserved. * * * Name: mpi2.h @@ -9,7 +9,7 @@ * scatter/gather formats. * Creation Date: June 21, 2006 * - * mpi2.h Version: 02.00.50 + * mpi2.h Version: 02.00.53 * * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 * prefix are for use only on MPI v2.5 products, and must not be used @@ -116,7 +116,12 @@ * 02-03-17 02.00.48 Bumped MPI2_HEADER_VERSION_UNIT. * 06-13-17 02.00.49 Bumped MPI2_HEADER_VERSION_UNIT. * 09-29-17 02.00.50 Bumped MPI2_HEADER_VERSION_UNIT. - * -------------------------------------------------------------------------- + * 07-22-18 02.00.51 Added SECURE_BOOT define. + * Bumped MPI2_HEADER_VERSION_UNIT + * 08-15-18 02.00.52 Bumped MPI2_HEADER_VERSION_UNIT. + * 08-28-18 02.00.53 Bumped MPI2_HEADER_VERSION_UNIT. + * Added MPI2_IOCSTATUS_FAILURE + * -------------------------------------------------------------------------- */ #ifndef MPI2_H @@ -156,7 +161,7 @@ /* Unit and Dev versioning for this MPI header set */ -#define MPI2_HEADER_VERSION_UNIT (0x32) +#define MPI2_HEADER_VERSION_UNIT (0x35) #define MPI2_HEADER_VERSION_DEV (0x00) #define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00) #define MPI2_HEADER_VERSION_UNIT_SHIFT (8) @@ -257,6 +262,8 @@ typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS { */ #define MPI2_HOST_DIAGNOSTIC_OFFSET (0x00000008) +#define MPI26_DIAG_SECURE_BOOT (0x80000000) + #define MPI2_DIAG_SBR_RELOAD (0x00002000) #define MPI2_DIAG_BOOT_DEVICE_SELECT_MASK (0x00001800) @@ -687,7 +694,9 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION { #define MPI2_IOCSTATUS_INVALID_FIELD (0x0007) #define MPI2_IOCSTATUS_INVALID_STATE (0x0008) #define MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED (0x0009) +/*MPI v2.6 and later */ #define MPI2_IOCSTATUS_INSUFFICIENT_POWER (0x000A) +#define MPI2_IOCSTATUS_FAILURE (0x000F) /**************************************************************************** * Config IOCStatus values diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h index 5122920a961a..398fa6fde960 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h @@ -1,13 +1,13 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* - * Copyright 2000-2015 Avago Technologies. All rights reserved. + * Copyright 2000-2020 Broadcom Inc. All rights reserved. * * * Name: mpi2_cnfg.h * Title: MPI Configuration messages and pages * Creation Date: November 10, 2006 * - * mpi2_cnfg.h Version: 02.00.42 + * mpi2_cnfg.h Version: 02.00.46 * * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 * prefix are for use only on MPI v2.5 products, and must not be used @@ -231,6 +231,18 @@ * Added NOIOB field to PCIe Device Page 2. * Added MPI26_PCIEDEV2_CAP_DATA_BLK_ALIGN_AND_GRAN to * the Capabilities field of PCIe Device Page 2. + * 07-22-18 02.00.43 Added defines for SAS3916 and SAS3816. + * Added WRiteCache defines to IO Unit Page 1. + * Added MaxEnclosureLevel to BIOS Page 1. + * Added OEMRD to SAS Enclosure Page 1. + * Added DMDReportPCIe to PCIe IO Unit Page 1. + * Added Flags field and flags for Retimers to + * PCIe Switch Page 1. + * 08-02-18 02.00.44 Added Slotx2, Slotx4 to ManPage 7. + * 08-15-18 02.00.45 Added ProductSpecific field at end of IOC Page 1 + * 08-28-18 02.00.46 Added NVMs Write Cache flag to IOUnitPage1 + * Added DMDReport Delay Time defines to + * PCIeIOUnitPage1 * -------------------------------------------------------------------------- */ @@ -568,8 +580,17 @@ typedef struct _MPI2_CONFIG_REPLY { #define MPI26_MFGPAGE_DEVID_SAS3616 (0x00D1) #define MPI26_MFGPAGE_DEVID_SAS3708 (0x00D2) -#define MPI26_MFGPAGE_DEVID_SAS3816 (0x00A1) -#define MPI26_MFGPAGE_DEVID_SAS3916 (0x00A0) +#define MPI26_MFGPAGE_DEVID_SEC_MASK_3916 (0x0003) +#define MPI26_MFGPAGE_DEVID_INVALID0_3916 (0x00E0) +#define MPI26_MFGPAGE_DEVID_CFG_SEC_3916 (0x00E1) +#define MPI26_MFGPAGE_DEVID_HARD_SEC_3916 (0x00E2) +#define MPI26_MFGPAGE_DEVID_INVALID1_3916 (0x00E3) + +#define MPI26_MFGPAGE_DEVID_SEC_MASK_3816 (0x0003) +#define MPI26_MFGPAGE_DEVID_INVALID0_3816 (0x00E4) +#define MPI26_MFGPAGE_DEVID_CFG_SEC_3816 (0x00E5) +#define MPI26_MFGPAGE_DEVID_HARD_SEC_3816 (0x00E6) +#define MPI26_MFGPAGE_DEVID_INVALID1_3816 (0x00E7) /*Manufacturing Page 0 */ @@ -932,7 +953,11 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 { #define MPI2_IOUNITPAGE1_PAGEVERSION (0x04) -/*IO Unit Page 1 Flags defines */ +/* IO Unit Page 1 Flags defines */ +#define MPI26_IOUNITPAGE1_NVME_WRCACHE_MASK (0x00030000) +#define MPI26_IOUNITPAGE1_NVME_WRCACHE_ENABLE (0x00000000) +#define MPI26_IOUNITPAGE1_NVME_WRCACHE_DISABLE (0x00010000) +#define MPI26_IOUNITPAGE1_NVME_WRCACHE_NO_CHANGE (0x00020000) #define MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK (0x00004000) #define MPI25_IOUNITPAGE1_NEW_DEVICE_FAST_PATH_DISABLE (0x00002000) #define MPI25_IOUNITPAGE1_DISABLE_FAST_PATH (0x00001000) @@ -1511,7 +1536,7 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 { U32 BiosOptions; /*0x04 */ U32 IOCSettings; /*0x08 */ U8 SSUTimeout; /*0x0C */ - U8 Reserved1; /*0x0D */ + U8 MaxEnclosureLevel; /*0x0D */ U16 Reserved2; /*0x0E */ U32 DeviceSettings; /*0x10 */ U16 NumberOfDevices; /*0x14 */ @@ -1531,7 +1556,6 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 { #define MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG (0x00004000) #define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK (0x00003800) -#define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK (0x00003800) #define MPI2_BIOSPAGE1_OPTIONS_PNS_PBDHL (0x00000000) #define MPI2_BIOSPAGE1_OPTIONS_PNS_ENCSLOSURE (0x00000800) #define MPI2_BIOSPAGE1_OPTIONS_PNS_LWWID (0x00001000) @@ -3271,10 +3295,12 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 { U16 NumSlots; /*0x18 */ U16 StartSlot; /*0x1A */ U8 ChassisSlot; /*0x1C */ - U8 EnclosureLeve; /*0x1D */ + U8 EnclosureLevel; /*0x1D */ U16 SEPDevHandle; /*0x1E */ - U32 Reserved3; /*0x20 */ - U32 Reserved4; /*0x24 */ + U8 OEMRD; /*0x20 */ + U8 Reserved1a; /*0x21 */ + U16 Reserved2; /*0x22 */ + U32 Reserved3; /*0x24 */ } MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0, *PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0, Mpi2SasEnclosurePage0_t, *pMpi2SasEnclosurePage0_t, @@ -3285,6 +3311,8 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 { #define MPI2_SASENCLOSURE0_PAGEVERSION (0x04) /*values for SAS Enclosure Page 0 Flags field */ +#define MPI26_SAS_ENCLS0_FLAGS_OEMRD_VALID (0x0080) +#define MPI26_SAS_ENCLS0_FLAGS_OEMRD_COLLECTING (0x0040) #define MPI2_SAS_ENCLS0_FLAGS_CHASSIS_SLOT_VALID (0x0020) #define MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010) #define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F) @@ -3298,6 +3326,8 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 { #define MPI26_ENCLOSURE0_PAGEVERSION (0x04) /*Values for Enclosure Page 0 Flags field */ +#define MPI26_ENCLS0_FLAGS_OEMRD_VALID (0x0080) +#define MPI26_ENCLS0_FLAGS_OEMRD_COLLECTING (0x0040) #define MPI26_ENCLS0_FLAGS_CHASSIS_SLOT_VALID (0x0020) #define MPI26_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010) #define MPI26_ENCLS0_FLAGS_MNG_MASK (0x000F) @@ -3696,8 +3726,9 @@ typedef struct _MPI26_PCIE_IO_UNIT1_PHY_DATA { Mpi26PCIeIOUnit1PhyData_t, *pMpi26PCIeIOUnit1PhyData_t; /*values for LinkFlags */ -#define MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SRIS (0x00) -#define MPI26_PCIEIOUNIT1_LINKFLAGS_EN_SRIS (0x01) +#define MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SEPARATE_REFCLK (0x00) +#define MPI26_PCIEIOUNIT1_LINKFLAGS_SRIS_EN (0x01) +#define MPI26_PCIEIOUNIT1_LINKFLAGS_SRNS_EN (0x02) /* *Host code (drivers, BIOS, utilities, etc.) should leave this define set to @@ -3714,7 +3745,7 @@ typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_1 { U16 AdditionalControlFlags; /*0x0C */ U16 NVMeMaxQueueDepth; /*0x0E */ U8 NumPhys; /*0x10 */ - U8 Reserved1; /*0x11 */ + U8 DMDReportPCIe; /*0x11 */ U16 Reserved2; /*0x12 */ MPI26_PCIE_IO_UNIT1_PHY_DATA PhyData[MPI26_PCIE_IOUNIT1_PHY_MAX];/*0x14 */ @@ -3736,6 +3767,12 @@ typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_1 { #define MPI26_PCIEIOUNIT1_MAX_RATE_8_0 (0x40) #define MPI26_PCIEIOUNIT1_MAX_RATE_16_0 (0x50) +/*values for PCIe IO Unit Page 1 DMDReportPCIe */ +#define MPI26_PCIEIOUNIT1_DMDRPT_UNIT_MASK (0x80) +#define MPI26_PCIEIOUNIT1_DMDRPT_UNIT_1_SEC (0x00) +#define MPI26_PCIEIOUNIT1_DMDRPT_UNIT_16_SEC (0x80) +#define MPI26_PCIEIOUNIT1_DMDRPT_DELAY_TIME_MASK (0x7F) + /*see mpi2_pci.h for values for PCIe IO Unit Page 0 ControllerPhyDeviceInfo *values */ @@ -3788,6 +3825,9 @@ typedef struct _MPI26_CONFIG_PAGE_PSWITCH_1 { /*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ +/* defines for the Flags field */ +#define MPI26_PCIESWITCH1_2_RETIMER_PRESENCE (0x0002) +#define MPI26_PCIESWITCH1_RETIMER_PRESENCE (0x0001) /**************************************************************************** * PCIe Device Config Pages (MPI v2.6 and later) @@ -3849,19 +3889,21 @@ typedef struct _MPI26_CONFIG_PAGE_PCIEDEV_0 { *field */ -/*values for PCIe Device Page 0 Flags field */ -#define MPI26_PCIEDEV0_FLAGS_UNAUTHORIZED_DEVICE (0x8000) -#define MPI26_PCIEDEV0_FLAGS_ENABLED_FAST_PATH (0x4000) -#define MPI26_PCIEDEV0_FLAGS_FAST_PATH_CAPABLE (0x2000) -#define MPI26_PCIEDEV0_FLAGS_ASYNCHRONOUS_NOTIFICATION (0x0400) -#define MPI26_PCIEDEV0_FLAGS_ATA_SW_PRESERVATION (0x0200) -#define MPI26_PCIEDEV0_FLAGS_UNSUPPORTED_DEVICE (0x0100) -#define MPI26_PCIEDEV0_FLAGS_ATA_48BIT_LBA_SUPPORTED (0x0080) -#define MPI26_PCIEDEV0_FLAGS_ATA_SMART_SUPPORTED (0x0040) -#define MPI26_PCIEDEV0_FLAGS_ATA_NCQ_SUPPORTED (0x0020) -#define MPI26_PCIEDEV0_FLAGS_ATA_FUA_SUPPORTED (0x0010) -#define MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID (0x0002) -#define MPI26_PCIEDEV0_FLAGS_DEVICE_PRESENT (0x0001) +/*values for PCIe Device Page 0 Flags field*/ +#define MPI26_PCIEDEV0_FLAGS_2_RETIMER_PRESENCE (0x00020000) +#define MPI26_PCIEDEV0_FLAGS_RETIMER_PRESENCE (0x00010000) +#define MPI26_PCIEDEV0_FLAGS_UNAUTHORIZED_DEVICE (0x00008000) +#define MPI26_PCIEDEV0_FLAGS_ENABLED_FAST_PATH (0x00004000) +#define MPI26_PCIEDEV0_FLAGS_FAST_PATH_CAPABLE (0x00002000) +#define MPI26_PCIEDEV0_FLAGS_ASYNCHRONOUS_NOTIFICATION (0x00000400) +#define MPI26_PCIEDEV0_FLAGS_ATA_SW_PRESERVATION (0x00000200) +#define MPI26_PCIEDEV0_FLAGS_UNSUPPORTED_DEVICE (0x00000100) +#define MPI26_PCIEDEV0_FLAGS_ATA_48BIT_LBA_SUPPORTED (0x00000080) +#define MPI26_PCIEDEV0_FLAGS_ATA_SMART_SUPPORTED (0x00000040) +#define MPI26_PCIEDEV0_FLAGS_ATA_NCQ_SUPPORTED (0x00000020) +#define MPI26_PCIEDEV0_FLAGS_ATA_FUA_SUPPORTED (0x00000010) +#define MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID (0x00000002) +#define MPI26_PCIEDEV0_FLAGS_DEVICE_PRESENT (0x00000001) /* values for PCIe Device Page 0 SupportedLinkRates field */ #define MPI26_PCIEDEV0_LINK_RATE_16_0_SUPPORTED (0x08) diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_image.h b/drivers/scsi/mpt3sas/mpi/mpi2_image.h new file mode 100644 index 000000000000..4959585f029d --- /dev/null +++ b/drivers/scsi/mpt3sas/mpi/mpi2_image.h @@ -0,0 +1,506 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2016-2020 Broadcom Limited. All rights reserved. + * + * Name: mpi2_image.h + * Description: Contains definitions for firmware and other component images + * Creation Date: 04/02/2018 + * Version: 02.06.03 + * + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 08-01-18 02.06.00 Initial version for MPI 2.6.5. + * 08-14-18 02.06.01 Corrected define for MPI26_IMAGE_HEADER_SIGNATURE0_MPI26 + * 08-28-18 02.06.02 Added MPI2_EXT_IMAGE_TYPE_RDE + * 09-07-18 02.06.03 Added MPI26_EVENT_PCIE_TOPO_PI_16_LANES + */ +#ifndef MPI2_IMAGE_H +#define MPI2_IMAGE_H + + +/*FW Image Header */ +typedef struct _MPI2_FW_IMAGE_HEADER { + U32 Signature; /*0x00 */ + U32 Signature0; /*0x04 */ + U32 Signature1; /*0x08 */ + U32 Signature2; /*0x0C */ + MPI2_VERSION_UNION MPIVersion; /*0x10 */ + MPI2_VERSION_UNION FWVersion; /*0x14 */ + MPI2_VERSION_UNION NVDATAVersion; /*0x18 */ + MPI2_VERSION_UNION PackageVersion; /*0x1C */ + U16 VendorID; /*0x20 */ + U16 ProductID; /*0x22 */ + U16 ProtocolFlags; /*0x24 */ + U16 Reserved26; /*0x26 */ + U32 IOCCapabilities; /*0x28 */ + U32 ImageSize; /*0x2C */ + U32 NextImageHeaderOffset; /*0x30 */ + U32 Checksum; /*0x34 */ + U32 Reserved38; /*0x38 */ + U32 Reserved3C; /*0x3C */ + U32 Reserved40; /*0x40 */ + U32 Reserved44; /*0x44 */ + U32 Reserved48; /*0x48 */ + U32 Reserved4C; /*0x4C */ + U32 Reserved50; /*0x50 */ + U32 Reserved54; /*0x54 */ + U32 Reserved58; /*0x58 */ + U32 Reserved5C; /*0x5C */ + U32 BootFlags; /*0x60 */ + U32 FirmwareVersionNameWhat; /*0x64 */ + U8 FirmwareVersionName[32]; /*0x68 */ + U32 VendorNameWhat; /*0x88 */ + U8 VendorName[32]; /*0x8C */ + U32 PackageNameWhat; /*0x88 */ + U8 PackageName[32]; /*0x8C */ + U32 ReservedD0; /*0xD0 */ + U32 ReservedD4; /*0xD4 */ + U32 ReservedD8; /*0xD8 */ + U32 ReservedDC; /*0xDC */ + U32 ReservedE0; /*0xE0 */ + U32 ReservedE4; /*0xE4 */ + U32 ReservedE8; /*0xE8 */ + U32 ReservedEC; /*0xEC */ + U32 ReservedF0; /*0xF0 */ + U32 ReservedF4; /*0xF4 */ + U32 ReservedF8; /*0xF8 */ + U32 ReservedFC; /*0xFC */ +} MPI2_FW_IMAGE_HEADER, *PTR_MPI2_FW_IMAGE_HEADER, + Mpi2FWImageHeader_t, *pMpi2FWImageHeader_t; + +/*Signature field */ +#define MPI2_FW_HEADER_SIGNATURE_OFFSET (0x00) +#define MPI2_FW_HEADER_SIGNATURE_MASK (0xFF000000) +#define MPI2_FW_HEADER_SIGNATURE (0xEA000000) +#define MPI26_FW_HEADER_SIGNATURE (0xEB000000) + +/*Signature0 field */ +#define MPI2_FW_HEADER_SIGNATURE0_OFFSET (0x04) +#define MPI2_FW_HEADER_SIGNATURE0 (0x5AFAA55A) +/*Last byte is defined by architecture */ +#define MPI26_FW_HEADER_SIGNATURE0_BASE (0x5AEAA500) +#define MPI26_FW_HEADER_SIGNATURE0_ARC_0 (0x5A) +#define MPI26_FW_HEADER_SIGNATURE0_ARC_1 (0x00) +#define MPI26_FW_HEADER_SIGNATURE0_ARC_2 (0x01) +/*legacy (0x5AEAA55A) */ +#define MPI26_FW_HEADER_SIGNATURE0_ARC_3 (0x02) +#define MPI26_FW_HEADER_SIGNATURE0 \ + (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_0) +#define MPI26_FW_HEADER_SIGNATURE0_3516 \ + (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_1) +#define MPI26_FW_HEADER_SIGNATURE0_4008 \ + (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_3) + +/*Signature1 field */ +#define MPI2_FW_HEADER_SIGNATURE1_OFFSET (0x08) +#define MPI2_FW_HEADER_SIGNATURE1 (0xA55AFAA5) +#define MPI26_FW_HEADER_SIGNATURE1 (0xA55AEAA5) + +/*Signature2 field */ +#define MPI2_FW_HEADER_SIGNATURE2_OFFSET (0x0C) +#define MPI2_FW_HEADER_SIGNATURE2 (0x5AA55AFA) +#define MPI26_FW_HEADER_SIGNATURE2 (0x5AA55AEA) + +/*defines for using the ProductID field */ +#define MPI2_FW_HEADER_PID_TYPE_MASK (0xF000) +#define MPI2_FW_HEADER_PID_TYPE_SAS (0x2000) + +#define MPI2_FW_HEADER_PID_PROD_MASK (0x0F00) +#define MPI2_FW_HEADER_PID_PROD_A (0x0000) +#define MPI2_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI (0x0200) +#define MPI2_FW_HEADER_PID_PROD_IR_SCSI (0x0700) + +#define MPI2_FW_HEADER_PID_FAMILY_MASK (0x00FF) +/*SAS ProductID Family bits */ +#define MPI2_FW_HEADER_PID_FAMILY_2108_SAS (0x0013) +#define MPI2_FW_HEADER_PID_FAMILY_2208_SAS (0x0014) +#define MPI25_FW_HEADER_PID_FAMILY_3108_SAS (0x0021) +#define MPI26_FW_HEADER_PID_FAMILY_3324_SAS (0x0028) +#define MPI26_FW_HEADER_PID_FAMILY_3516_SAS (0x0031) + +/*use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */ + +/*use MPI2_IOCFACTS_CAPABILITY_ defines for IOCCapabilities field */ + +#define MPI2_FW_HEADER_IMAGESIZE_OFFSET (0x2C) +#define MPI2_FW_HEADER_NEXTIMAGE_OFFSET (0x30) + +#define MPI26_FW_HEADER_BOOTFLAGS_OFFSET (0x60) +#define MPI2_FW_HEADER_BOOTFLAGS_ISSI32M_FLAG (0x00000001) +#define MPI2_FW_HEADER_BOOTFLAGS_W25Q256JW_FLAG (0x00000002) +/*This image has a auto-discovery version of SPI */ +#define MPI2_FW_HEADER_BOOTFLAGS_AUTO_SPI_FLAG (0x00000004) + + +#define MPI2_FW_HEADER_VERNMHWAT_OFFSET (0x64) + +#define MPI2_FW_HEADER_WHAT_SIGNATURE (0x29232840) + +#define MPI2_FW_HEADER_SIZE (0x100) + + +/**************************************************************************** + * Component Image Format and related defines * + ****************************************************************************/ + +/*Maximum number of Hash Exclusion entries in a Component Image Header */ +#define MPI26_COMP_IMG_HDR_NUM_HASH_EXCL (4) + +/*Hash Exclusion Format */ +typedef struct _MPI26_HASH_EXCLUSION_FORMAT { + U32 Offset; /*0x00 */ + U32 Size; /*0x04 */ +} MPI26_HASH_EXCLUSION_FORMAT, + *PTR_MPI26_HASH_EXCLUSION_FORMAT, + Mpi26HashSxclusionFormat_t, + *pMpi26HashExclusionFormat_t; + +/*FW Image Header */ +typedef struct _MPI26_COMPONENT_IMAGE_HEADER { + U32 Signature0; /*0x00 */ + U32 LoadAddress; /*0x04 */ + U32 DataSize; /*0x08 */ + U32 StartAddress; /*0x0C */ + U32 Signature1; /*0x10 */ + U32 FlashOffset; /*0x14 */ + U32 FlashSize; /*0x18 */ + U32 VersionStringOffset; /*0x1C */ + U32 BuildDateStringOffset; /*0x20 */ + U32 BuildTimeStringOffset; /*0x24 */ + U32 EnvironmentVariableOffset; /*0x28 */ + U32 ApplicationSpecific; /*0x2C */ + U32 Signature2; /*0x30 */ + U32 HeaderSize; /*0x34 */ + U32 Crc; /*0x38 */ + U8 NotFlashImage; /*0x3C */ + U8 Compressed; /*0x3D */ + U16 Reserved3E; /*0x3E */ + U32 SecondaryFlashOffset; /*0x40 */ + U32 Reserved44; /*0x44 */ + U32 Reserved48; /*0x48 */ + MPI2_VERSION_UNION RMCInterfaceVersion; /*0x4C */ + MPI2_VERSION_UNION Reserved50; /*0x50 */ + MPI2_VERSION_UNION FWVersion; /*0x54 */ + MPI2_VERSION_UNION NvdataVersion; /*0x58 */ + MPI26_HASH_EXCLUSION_FORMAT + HashExclusion[MPI26_COMP_IMG_HDR_NUM_HASH_EXCL];/*0x5C */ + U32 NextImageHeaderOffset; /*0x7C */ + U32 Reserved80[32]; /*0x80 -- 0xFC */ +} MPI26_COMPONENT_IMAGE_HEADER, + *PTR_MPI26_COMPONENT_IMAGE_HEADER, + Mpi26ComponentImageHeader_t, + *pMpi26ComponentImageHeader_t; + + +/**** Definitions for Signature0 field ****/ +#define MPI26_IMAGE_HEADER_SIGNATURE0_MPI26 (0xEB000042) + +/**** Definitions for Signature1 field ****/ +#define MPI26_IMAGE_HEADER_SIGNATURE1_APPLICATION (0x20505041) +#define MPI26_IMAGE_HEADER_SIGNATURE1_CBB (0x20424243) +#define MPI26_IMAGE_HEADER_SIGNATURE1_MFG (0x2047464D) +#define MPI26_IMAGE_HEADER_SIGNATURE1_BIOS (0x534F4942) +#define MPI26_IMAGE_HEADER_SIGNATURE1_HIIM (0x4D494948) +#define MPI26_IMAGE_HEADER_SIGNATURE1_HIIA (0x41494948) +#define MPI26_IMAGE_HEADER_SIGNATURE1_CPLD (0x444C5043) +#define MPI26_IMAGE_HEADER_SIGNATURE1_SPD (0x20445053) +#define MPI26_IMAGE_HEADER_SIGNATURE1_NVDATA (0x5444564E) +#define MPI26_IMAGE_HEADER_SIGNATURE1_GAS_GAUGE (0x20534147) +#define MPI26_IMAGE_HEADER_SIGNATURE1_PBLP (0x50424C50) + +/**** Definitions for Signature2 field ****/ +#define MPI26_IMAGE_HEADER_SIGNATURE2_VALUE (0x50584546) + +/**** Offsets for Image Header Fields ****/ +#define MPI26_IMAGE_HEADER_SIGNATURE0_OFFSET (0x00) +#define MPI26_IMAGE_HEADER_LOAD_ADDRESS_OFFSET (0x04) +#define MPI26_IMAGE_HEADER_DATA_SIZE_OFFSET (0x08) +#define MPI26_IMAGE_HEADER_START_ADDRESS_OFFSET (0x0C) +#define MPI26_IMAGE_HEADER_SIGNATURE1_OFFSET (0x10) +#define MPI26_IMAGE_HEADER_FLASH_OFFSET_OFFSET (0x14) +#define MPI26_IMAGE_HEADER_FLASH_SIZE_OFFSET (0x18) +#define MPI26_IMAGE_HEADER_VERSION_STRING_OFFSET_OFFSET (0x1C) +#define MPI26_IMAGE_HEADER_BUILD_DATE_STRING_OFFSET_OFFSET (0x20) +#define MPI26_IMAGE_HEADER_BUILD_TIME_OFFSET_OFFSET (0x24) +#define MPI26_IMAGE_HEADER_ENVIROMENT_VAR_OFFSET_OFFSET (0x28) +#define MPI26_IMAGE_HEADER_APPLICATION_SPECIFIC_OFFSET (0x2C) +#define MPI26_IMAGE_HEADER_SIGNATURE2_OFFSET (0x30) +#define MPI26_IMAGE_HEADER_HEADER_SIZE_OFFSET (0x34) +#define MPI26_IMAGE_HEADER_CRC_OFFSET (0x38) +#define MPI26_IMAGE_HEADER_NOT_FLASH_IMAGE_OFFSET (0x3C) +#define MPI26_IMAGE_HEADER_COMPRESSED_OFFSET (0x3D) +#define MPI26_IMAGE_HEADER_SECONDARY_FLASH_OFFSET_OFFSET (0x40) +#define MPI26_IMAGE_HEADER_RMC_INTERFACE_VER_OFFSET (0x4C) +#define MPI26_IMAGE_HEADER_COMPONENT_IMAGE_VER_OFFSET (0x54) +#define MPI26_IMAGE_HEADER_HASH_EXCLUSION_OFFSET (0x5C) +#define MPI26_IMAGE_HEADER_NEXT_IMAGE_HEADER_OFFSET_OFFSET (0x7C) + + +#define MPI26_IMAGE_HEADER_SIZE (0x100) + + +/*Extended Image Header */ +typedef struct _MPI2_EXT_IMAGE_HEADER { + U8 ImageType; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ + U32 Checksum; /*0x04 */ + U32 ImageSize; /*0x08 */ + U32 NextImageHeaderOffset; /*0x0C */ + U32 PackageVersion; /*0x10 */ + U32 Reserved3; /*0x14 */ + U32 Reserved4; /*0x18 */ + U32 Reserved5; /*0x1C */ + U8 IdentifyString[32]; /*0x20 */ +} MPI2_EXT_IMAGE_HEADER, *PTR_MPI2_EXT_IMAGE_HEADER, + Mpi2ExtImageHeader_t, *pMpi2ExtImageHeader_t; + +/*useful offsets */ +#define MPI2_EXT_IMAGE_IMAGETYPE_OFFSET (0x00) +#define MPI2_EXT_IMAGE_IMAGESIZE_OFFSET (0x08) +#define MPI2_EXT_IMAGE_NEXTIMAGE_OFFSET (0x0C) +#define MPI2_EXT_IMAGE_PACKAGEVERSION_OFFSET (0x10) + +#define MPI2_EXT_IMAGE_HEADER_SIZE (0x40) + +/*defines for the ImageType field */ +#define MPI2_EXT_IMAGE_TYPE_UNSPECIFIED (0x00) +#define MPI2_EXT_IMAGE_TYPE_FW (0x01) +#define MPI2_EXT_IMAGE_TYPE_NVDATA (0x03) +#define MPI2_EXT_IMAGE_TYPE_BOOTLOADER (0x04) +#define MPI2_EXT_IMAGE_TYPE_INITIALIZATION (0x05) +#define MPI2_EXT_IMAGE_TYPE_FLASH_LAYOUT (0x06) +#define MPI2_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07) +#define MPI2_EXT_IMAGE_TYPE_MEGARAID (0x08) +#define MPI2_EXT_IMAGE_TYPE_ENCRYPTED_HASH (0x09) +#define MPI2_EXT_IMAGE_TYPE_RDE (0x0A) +#define MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC (0x80) +#define MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC (0xFF) + +#define MPI2_EXT_IMAGE_TYPE_MAX (MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC) + +/*FLASH Layout Extended Image Data */ + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check RegionsPerLayout at runtime. + */ +#ifndef MPI2_FLASH_NUMBER_OF_REGIONS +#define MPI2_FLASH_NUMBER_OF_REGIONS (1) +#endif + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check NumberOfLayouts at runtime. + */ +#ifndef MPI2_FLASH_NUMBER_OF_LAYOUTS +#define MPI2_FLASH_NUMBER_OF_LAYOUTS (1) +#endif + +typedef struct _MPI2_FLASH_REGION { + U8 RegionType; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ + U32 RegionOffset; /*0x04 */ + U32 RegionSize; /*0x08 */ + U32 Reserved3; /*0x0C */ +} MPI2_FLASH_REGION, *PTR_MPI2_FLASH_REGION, + Mpi2FlashRegion_t, *pMpi2FlashRegion_t; + +typedef struct _MPI2_FLASH_LAYOUT { + U32 FlashSize; /*0x00 */ + U32 Reserved1; /*0x04 */ + U32 Reserved2; /*0x08 */ + U32 Reserved3; /*0x0C */ + MPI2_FLASH_REGION Region[MPI2_FLASH_NUMBER_OF_REGIONS]; /*0x10 */ +} MPI2_FLASH_LAYOUT, *PTR_MPI2_FLASH_LAYOUT, + Mpi2FlashLayout_t, *pMpi2FlashLayout_t; + +typedef struct _MPI2_FLASH_LAYOUT_DATA { + U8 ImageRevision; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 SizeOfRegion; /*0x02 */ + U8 Reserved2; /*0x03 */ + U16 NumberOfLayouts; /*0x04 */ + U16 RegionsPerLayout; /*0x06 */ + U16 MinimumSectorAlignment; /*0x08 */ + U16 Reserved3; /*0x0A */ + U32 Reserved4; /*0x0C */ + MPI2_FLASH_LAYOUT Layout[MPI2_FLASH_NUMBER_OF_LAYOUTS]; /*0x10 */ +} MPI2_FLASH_LAYOUT_DATA, *PTR_MPI2_FLASH_LAYOUT_DATA, + Mpi2FlashLayoutData_t, *pMpi2FlashLayoutData_t; + +/*defines for the RegionType field */ +#define MPI2_FLASH_REGION_UNUSED (0x00) +#define MPI2_FLASH_REGION_FIRMWARE (0x01) +#define MPI2_FLASH_REGION_BIOS (0x02) +#define MPI2_FLASH_REGION_NVDATA (0x03) +#define MPI2_FLASH_REGION_FIRMWARE_BACKUP (0x05) +#define MPI2_FLASH_REGION_MFG_INFORMATION (0x06) +#define MPI2_FLASH_REGION_CONFIG_1 (0x07) +#define MPI2_FLASH_REGION_CONFIG_2 (0x08) +#define MPI2_FLASH_REGION_MEGARAID (0x09) +#define MPI2_FLASH_REGION_COMMON_BOOT_BLOCK (0x0A) +#define MPI2_FLASH_REGION_INIT (MPI2_FLASH_REGION_COMMON_BOOT_BLOCK) +#define MPI2_FLASH_REGION_CBB_BACKUP (0x0D) +#define MPI2_FLASH_REGION_SBR (0x0E) +#define MPI2_FLASH_REGION_SBR_BACKUP (0x0F) +#define MPI2_FLASH_REGION_HIIM (0x10) +#define MPI2_FLASH_REGION_HIIA (0x11) +#define MPI2_FLASH_REGION_CTLR (0x12) +#define MPI2_FLASH_REGION_IMR_FIRMWARE (0x13) +#define MPI2_FLASH_REGION_MR_NVDATA (0x14) +#define MPI2_FLASH_REGION_CPLD (0x15) +#define MPI2_FLASH_REGION_PSOC (0x16) + +/*ImageRevision */ +#define MPI2_FLASH_LAYOUT_IMAGE_REVISION (0x00) + +/*Supported Devices Extended Image Data */ + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check NumberOfDevices at runtime. + */ +#ifndef MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES +#define MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES (1) +#endif + +typedef struct _MPI2_SUPPORTED_DEVICE { + U16 DeviceID; /*0x00 */ + U16 VendorID; /*0x02 */ + U16 DeviceIDMask; /*0x04 */ + U16 Reserved1; /*0x06 */ + U8 LowPCIRev; /*0x08 */ + U8 HighPCIRev; /*0x09 */ + U16 Reserved2; /*0x0A */ + U32 Reserved3; /*0x0C */ +} MPI2_SUPPORTED_DEVICE, *PTR_MPI2_SUPPORTED_DEVICE, + Mpi2SupportedDevice_t, *pMpi2SupportedDevice_t; + +typedef struct _MPI2_SUPPORTED_DEVICES_DATA { + U8 ImageRevision; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 NumberOfDevices; /*0x02 */ + U8 Reserved2; /*0x03 */ + U32 Reserved3; /*0x04 */ + MPI2_SUPPORTED_DEVICE + SupportedDevice[MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES];/*0x08 */ +} MPI2_SUPPORTED_DEVICES_DATA, *PTR_MPI2_SUPPORTED_DEVICES_DATA, + Mpi2SupportedDevicesData_t, *pMpi2SupportedDevicesData_t; + +/*ImageRevision */ +#define MPI2_SUPPORTED_DEVICES_IMAGE_REVISION (0x00) + +/*Init Extended Image Data */ + +typedef struct _MPI2_INIT_IMAGE_FOOTER { + U32 BootFlags; /*0x00 */ + U32 ImageSize; /*0x04 */ + U32 Signature0; /*0x08 */ + U32 Signature1; /*0x0C */ + U32 Signature2; /*0x10 */ + U32 ResetVector; /*0x14 */ +} MPI2_INIT_IMAGE_FOOTER, *PTR_MPI2_INIT_IMAGE_FOOTER, + Mpi2InitImageFooter_t, *pMpi2InitImageFooter_t; + +/*defines for the BootFlags field */ +#define MPI2_INIT_IMAGE_BOOTFLAGS_OFFSET (0x00) + +/*defines for the ImageSize field */ +#define MPI2_INIT_IMAGE_IMAGESIZE_OFFSET (0x04) + +/*defines for the Signature0 field */ +#define MPI2_INIT_IMAGE_SIGNATURE0_OFFSET (0x08) +#define MPI2_INIT_IMAGE_SIGNATURE0 (0x5AA55AEA) + +/*defines for the Signature1 field */ +#define MPI2_INIT_IMAGE_SIGNATURE1_OFFSET (0x0C) +#define MPI2_INIT_IMAGE_SIGNATURE1 (0xA55AEAA5) + +/*defines for the Signature2 field */ +#define MPI2_INIT_IMAGE_SIGNATURE2_OFFSET (0x10) +#define MPI2_INIT_IMAGE_SIGNATURE2 (0x5AEAA55A) + +/*Signature fields as individual bytes */ +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_0 (0xEA) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_1 (0x5A) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_2 (0xA5) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_3 (0x5A) + +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_4 (0xA5) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_5 (0xEA) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_6 (0x5A) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_7 (0xA5) + +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_8 (0x5A) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_9 (0xA5) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_A (0xEA) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_B (0x5A) + +/*defines for the ResetVector field */ +#define MPI2_INIT_IMAGE_RESETVECTOR_OFFSET (0x14) + + +/* Encrypted Hash Extended Image Data */ + +typedef struct _MPI25_ENCRYPTED_HASH_ENTRY { + U8 HashImageType; /*0x00 */ + U8 HashAlgorithm; /*0x01 */ + U8 EncryptionAlgorithm; /*0x02 */ + U8 Reserved1; /*0x03 */ + U32 Reserved2; /*0x04 */ + U32 EncryptedHash[1]; /*0x08 */ /* variable length */ +} MPI25_ENCRYPTED_HASH_ENTRY, *PTR_MPI25_ENCRYPTED_HASH_ENTRY, +Mpi25EncryptedHashEntry_t, *pMpi25EncryptedHashEntry_t; + +/* values for HashImageType */ +#define MPI25_HASH_IMAGE_TYPE_UNUSED (0x00) +#define MPI25_HASH_IMAGE_TYPE_FIRMWARE (0x01) +#define MPI25_HASH_IMAGE_TYPE_BIOS (0x02) + +#define MPI26_HASH_IMAGE_TYPE_UNUSED (0x00) +#define MPI26_HASH_IMAGE_TYPE_FIRMWARE (0x01) +#define MPI26_HASH_IMAGE_TYPE_BIOS (0x02) +#define MPI26_HASH_IMAGE_TYPE_KEY_HASH (0x03) + +/* values for HashAlgorithm */ +#define MPI25_HASH_ALGORITHM_UNUSED (0x00) +#define MPI25_HASH_ALGORITHM_SHA256 (0x01) + +#define MPI26_HASH_ALGORITHM_VERSION_MASK (0xE0) +#define MPI26_HASH_ALGORITHM_VERSION_NONE (0x00) +#define MPI26_HASH_ALGORITHM_VERSION_SHA1 (0x20) +#define MPI26_HASH_ALGORITHM_VERSION_SHA2 (0x40) +#define MPI26_HASH_ALGORITHM_VERSION_SHA3 (0x60) +#define MPI26_HASH_ALGORITHM_SIZE_MASK (0x1F) +#define MPI26_HASH_ALGORITHM_SIZE_256 (0x01) +#define MPI26_HASH_ALGORITHM_SIZE_512 (0x02) + + +/* values for EncryptionAlgorithm */ +#define MPI25_ENCRYPTION_ALG_UNUSED (0x00) +#define MPI25_ENCRYPTION_ALG_RSA256 (0x01) + +#define MPI26_ENCRYPTION_ALG_UNUSED (0x00) +#define MPI26_ENCRYPTION_ALG_RSA256 (0x01) +#define MPI26_ENCRYPTION_ALG_RSA512 (0x02) +#define MPI26_ENCRYPTION_ALG_RSA1024 (0x03) +#define MPI26_ENCRYPTION_ALG_RSA2048 (0x04) +#define MPI26_ENCRYPTION_ALG_RSA4096 (0x05) + +typedef struct _MPI25_ENCRYPTED_HASH_DATA { + U8 ImageVersion; /*0x00 */ + U8 NumHash; /*0x01 */ + U16 Reserved1; /*0x02 */ + U32 Reserved2; /*0x04 */ + MPI25_ENCRYPTED_HASH_ENTRY EncryptedHashEntry[1]; /*0x08 */ +} MPI25_ENCRYPTED_HASH_DATA, *PTR_MPI25_ENCRYPTED_HASH_DATA, +Mpi25EncryptedHashData_t, *pMpi25EncryptedHashData_t; + + +#endif /* MPI2_IMAGE_H */ diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_init.h b/drivers/scsi/mpt3sas/mpi/mpi2_init.h index 6213ce6791ac..8f1b903fe0a9 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_init.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_init.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* - * Copyright 2000-2015 Avago Technologies. All rights reserved. + * Copyright 2000-2020 Broadcom Inc. All rights reserved. * * * Name: mpi2_init.h diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h index 1faec3a93e69..68ea408cd5c5 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h @@ -1,13 +1,13 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* - * Copyright 2000-2015 Avago Technologies. All rights reserved. + * Copyright 2000-2020 Broadcom Inc. All rights reserved. * * * Name: mpi2_ioc.h * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages * Creation Date: October 11, 2006 * - * mpi2_ioc.h Version: 02.00.34 + * mpi2_ioc.h Version: 02.00.37 * * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 * prefix are for use only on MPI v2.5 products, and must not be used @@ -171,6 +171,10 @@ * 09-29-17 02.00.34 Added MPI26_EVENT_PCIDEV_STAT_RC_PCIE_HOT_RESET_FAILED * to the ReasonCode field in PCIe Device Status Change * Event Data. + * 07-22-18 02.00.35 Added FW_DOWNLOAD_ITYPE_CPLD and _PSOC. + * Moved FW image definitions ionto new mpi2_image,h + * 08-14-18 02.00.36 Fixed definition of MPI2_FW_DOWNLOAD_ITYPE_PSOC (0x16) + * 09-07-18 02.00.37 Added MPI26_EVENT_PCIE_TOPO_PI_16_LANES * -------------------------------------------------------------------------- */ @@ -1255,6 +1259,7 @@ typedef struct _MPI26_EVENT_PCIE_TOPO_PORT_ENTRY { #define MPI26_EVENT_PCIE_TOPO_PI_2_LANES (0x20) #define MPI26_EVENT_PCIE_TOPO_PI_4_LANES (0x30) #define MPI26_EVENT_PCIE_TOPO_PI_8_LANES (0x40) +#define MPI26_EVENT_PCIE_TOPO_PI_16_LANES (0x50) #define MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK (0x0F) #define MPI26_EVENT_PCIE_TOPO_PI_RATE_UNKNOWN (0x00) @@ -1450,7 +1455,11 @@ typedef struct _MPI2_FW_DOWNLOAD_REQUEST { #define MPI2_FW_DOWNLOAD_ITYPE_CTLR (0x12) #define MPI2_FW_DOWNLOAD_ITYPE_IMR_FIRMWARE (0x13) #define MPI2_FW_DOWNLOAD_ITYPE_MR_NVDATA (0x14) +/*MPI v2.6 and newer */ +#define MPI2_FW_DOWNLOAD_ITYPE_CPLD (0x15) +#define MPI2_FW_DOWNLOAD_ITYPE_PSOC (0x16) #define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0) +#define MPI2_FW_DOWNLOAD_ITYPE_TERMINATE (0xFF) /*MPI v2.0 FWDownload TransactionContext Element */ typedef struct _MPI2_FW_DOWNLOAD_TCSGE { @@ -1597,352 +1606,6 @@ typedef struct _MPI2_FW_UPLOAD_REPLY { } MPI2_FW_UPLOAD_REPLY, *PTR_MPI2_FW_UPLOAD_REPLY, Mpi2FWUploadReply_t, *pMPi2FWUploadReply_t; -/*FW Image Header */ -typedef struct _MPI2_FW_IMAGE_HEADER { - U32 Signature; /*0x00 */ - U32 Signature0; /*0x04 */ - U32 Signature1; /*0x08 */ - U32 Signature2; /*0x0C */ - MPI2_VERSION_UNION MPIVersion; /*0x10 */ - MPI2_VERSION_UNION FWVersion; /*0x14 */ - MPI2_VERSION_UNION NVDATAVersion; /*0x18 */ - MPI2_VERSION_UNION PackageVersion; /*0x1C */ - U16 VendorID; /*0x20 */ - U16 ProductID; /*0x22 */ - U16 ProtocolFlags; /*0x24 */ - U16 Reserved26; /*0x26 */ - U32 IOCCapabilities; /*0x28 */ - U32 ImageSize; /*0x2C */ - U32 NextImageHeaderOffset; /*0x30 */ - U32 Checksum; /*0x34 */ - U32 Reserved38; /*0x38 */ - U32 Reserved3C; /*0x3C */ - U32 Reserved40; /*0x40 */ - U32 Reserved44; /*0x44 */ - U32 Reserved48; /*0x48 */ - U32 Reserved4C; /*0x4C */ - U32 Reserved50; /*0x50 */ - U32 Reserved54; /*0x54 */ - U32 Reserved58; /*0x58 */ - U32 Reserved5C; /*0x5C */ - U32 BootFlags; /*0x60 */ - U32 FirmwareVersionNameWhat; /*0x64 */ - U8 FirmwareVersionName[32]; /*0x68 */ - U32 VendorNameWhat; /*0x88 */ - U8 VendorName[32]; /*0x8C */ - U32 PackageNameWhat; /*0x88 */ - U8 PackageName[32]; /*0x8C */ - U32 ReservedD0; /*0xD0 */ - U32 ReservedD4; /*0xD4 */ - U32 ReservedD8; /*0xD8 */ - U32 ReservedDC; /*0xDC */ - U32 ReservedE0; /*0xE0 */ - U32 ReservedE4; /*0xE4 */ - U32 ReservedE8; /*0xE8 */ - U32 ReservedEC; /*0xEC */ - U32 ReservedF0; /*0xF0 */ - U32 ReservedF4; /*0xF4 */ - U32 ReservedF8; /*0xF8 */ - U32 ReservedFC; /*0xFC */ -} MPI2_FW_IMAGE_HEADER, *PTR_MPI2_FW_IMAGE_HEADER, - Mpi2FWImageHeader_t, *pMpi2FWImageHeader_t; - -/*Signature field */ -#define MPI2_FW_HEADER_SIGNATURE_OFFSET (0x00) -#define MPI2_FW_HEADER_SIGNATURE_MASK (0xFF000000) -#define MPI2_FW_HEADER_SIGNATURE (0xEA000000) -#define MPI26_FW_HEADER_SIGNATURE (0xEB000000) - -/*Signature0 field */ -#define MPI2_FW_HEADER_SIGNATURE0_OFFSET (0x04) -#define MPI2_FW_HEADER_SIGNATURE0 (0x5AFAA55A) -/* Last byte is defined by architecture */ -#define MPI26_FW_HEADER_SIGNATURE0_BASE (0x5AEAA500) -#define MPI26_FW_HEADER_SIGNATURE0_ARC_0 (0x5A) -#define MPI26_FW_HEADER_SIGNATURE0_ARC_1 (0x00) -#define MPI26_FW_HEADER_SIGNATURE0_ARC_2 (0x01) -/* legacy (0x5AEAA55A) */ -#define MPI26_FW_HEADER_SIGNATURE0_ARC_3 (0x02) -#define MPI26_FW_HEADER_SIGNATURE0 \ - (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_0) -#define MPI26_FW_HEADER_SIGNATURE0_3516 \ - (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_1) -#define MPI26_FW_HEADER_SIGNATURE0_4008 \ - (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_3) - -/*Signature1 field */ -#define MPI2_FW_HEADER_SIGNATURE1_OFFSET (0x08) -#define MPI2_FW_HEADER_SIGNATURE1 (0xA55AFAA5) -#define MPI26_FW_HEADER_SIGNATURE1 (0xA55AEAA5) - -/*Signature2 field */ -#define MPI2_FW_HEADER_SIGNATURE2_OFFSET (0x0C) -#define MPI2_FW_HEADER_SIGNATURE2 (0x5AA55AFA) -#define MPI26_FW_HEADER_SIGNATURE2 (0x5AA55AEA) - -/*defines for using the ProductID field */ -#define MPI2_FW_HEADER_PID_TYPE_MASK (0xF000) -#define MPI2_FW_HEADER_PID_TYPE_SAS (0x2000) - -#define MPI2_FW_HEADER_PID_PROD_MASK (0x0F00) -#define MPI2_FW_HEADER_PID_PROD_A (0x0000) -#define MPI2_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI (0x0200) -#define MPI2_FW_HEADER_PID_PROD_IR_SCSI (0x0700) - -#define MPI2_FW_HEADER_PID_FAMILY_MASK (0x00FF) -/*SAS ProductID Family bits */ -#define MPI2_FW_HEADER_PID_FAMILY_2108_SAS (0x0013) -#define MPI2_FW_HEADER_PID_FAMILY_2208_SAS (0x0014) -#define MPI25_FW_HEADER_PID_FAMILY_3108_SAS (0x0021) -#define MPI26_FW_HEADER_PID_FAMILY_3324_SAS (0x0028) -#define MPI26_FW_HEADER_PID_FAMILY_3516_SAS (0x0031) - -/*use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */ - -/*use MPI2_IOCFACTS_CAPABILITY_ defines for IOCCapabilities field */ - -#define MPI2_FW_HEADER_IMAGESIZE_OFFSET (0x2C) -#define MPI2_FW_HEADER_NEXTIMAGE_OFFSET (0x30) -#define MPI26_FW_HEADER_BOOTFLAGS_OFFSET (0x60) -#define MPI2_FW_HEADER_VERNMHWAT_OFFSET (0x64) - -#define MPI2_FW_HEADER_WHAT_SIGNATURE (0x29232840) - -#define MPI2_FW_HEADER_SIZE (0x100) - -/*Extended Image Header */ -typedef struct _MPI2_EXT_IMAGE_HEADER { - U8 ImageType; /*0x00 */ - U8 Reserved1; /*0x01 */ - U16 Reserved2; /*0x02 */ - U32 Checksum; /*0x04 */ - U32 ImageSize; /*0x08 */ - U32 NextImageHeaderOffset; /*0x0C */ - U32 PackageVersion; /*0x10 */ - U32 Reserved3; /*0x14 */ - U32 Reserved4; /*0x18 */ - U32 Reserved5; /*0x1C */ - U8 IdentifyString[32]; /*0x20 */ -} MPI2_EXT_IMAGE_HEADER, *PTR_MPI2_EXT_IMAGE_HEADER, - Mpi2ExtImageHeader_t, *pMpi2ExtImageHeader_t; - -/*useful offsets */ -#define MPI2_EXT_IMAGE_IMAGETYPE_OFFSET (0x00) -#define MPI2_EXT_IMAGE_IMAGESIZE_OFFSET (0x08) -#define MPI2_EXT_IMAGE_NEXTIMAGE_OFFSET (0x0C) - -#define MPI2_EXT_IMAGE_HEADER_SIZE (0x40) - -/*defines for the ImageType field */ -#define MPI2_EXT_IMAGE_TYPE_UNSPECIFIED (0x00) -#define MPI2_EXT_IMAGE_TYPE_FW (0x01) -#define MPI2_EXT_IMAGE_TYPE_NVDATA (0x03) -#define MPI2_EXT_IMAGE_TYPE_BOOTLOADER (0x04) -#define MPI2_EXT_IMAGE_TYPE_INITIALIZATION (0x05) -#define MPI2_EXT_IMAGE_TYPE_FLASH_LAYOUT (0x06) -#define MPI2_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07) -#define MPI2_EXT_IMAGE_TYPE_MEGARAID (0x08) -#define MPI2_EXT_IMAGE_TYPE_ENCRYPTED_HASH (0x09) -#define MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC (0x80) -#define MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC (0xFF) - -#define MPI2_EXT_IMAGE_TYPE_MAX (MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC) - -/*FLASH Layout Extended Image Data */ - -/* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check RegionsPerLayout at runtime. - */ -#ifndef MPI2_FLASH_NUMBER_OF_REGIONS -#define MPI2_FLASH_NUMBER_OF_REGIONS (1) -#endif - -/* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check NumberOfLayouts at runtime. - */ -#ifndef MPI2_FLASH_NUMBER_OF_LAYOUTS -#define MPI2_FLASH_NUMBER_OF_LAYOUTS (1) -#endif - -typedef struct _MPI2_FLASH_REGION { - U8 RegionType; /*0x00 */ - U8 Reserved1; /*0x01 */ - U16 Reserved2; /*0x02 */ - U32 RegionOffset; /*0x04 */ - U32 RegionSize; /*0x08 */ - U32 Reserved3; /*0x0C */ -} MPI2_FLASH_REGION, *PTR_MPI2_FLASH_REGION, - Mpi2FlashRegion_t, *pMpi2FlashRegion_t; - -typedef struct _MPI2_FLASH_LAYOUT { - U32 FlashSize; /*0x00 */ - U32 Reserved1; /*0x04 */ - U32 Reserved2; /*0x08 */ - U32 Reserved3; /*0x0C */ - MPI2_FLASH_REGION Region[MPI2_FLASH_NUMBER_OF_REGIONS]; /*0x10 */ -} MPI2_FLASH_LAYOUT, *PTR_MPI2_FLASH_LAYOUT, - Mpi2FlashLayout_t, *pMpi2FlashLayout_t; - -typedef struct _MPI2_FLASH_LAYOUT_DATA { - U8 ImageRevision; /*0x00 */ - U8 Reserved1; /*0x01 */ - U8 SizeOfRegion; /*0x02 */ - U8 Reserved2; /*0x03 */ - U16 NumberOfLayouts; /*0x04 */ - U16 RegionsPerLayout; /*0x06 */ - U16 MinimumSectorAlignment; /*0x08 */ - U16 Reserved3; /*0x0A */ - U32 Reserved4; /*0x0C */ - MPI2_FLASH_LAYOUT Layout[MPI2_FLASH_NUMBER_OF_LAYOUTS]; /*0x10 */ -} MPI2_FLASH_LAYOUT_DATA, *PTR_MPI2_FLASH_LAYOUT_DATA, - Mpi2FlashLayoutData_t, *pMpi2FlashLayoutData_t; - -/*defines for the RegionType field */ -#define MPI2_FLASH_REGION_UNUSED (0x00) -#define MPI2_FLASH_REGION_FIRMWARE (0x01) -#define MPI2_FLASH_REGION_BIOS (0x02) -#define MPI2_FLASH_REGION_NVDATA (0x03) -#define MPI2_FLASH_REGION_FIRMWARE_BACKUP (0x05) -#define MPI2_FLASH_REGION_MFG_INFORMATION (0x06) -#define MPI2_FLASH_REGION_CONFIG_1 (0x07) -#define MPI2_FLASH_REGION_CONFIG_2 (0x08) -#define MPI2_FLASH_REGION_MEGARAID (0x09) -#define MPI2_FLASH_REGION_COMMON_BOOT_BLOCK (0x0A) -#define MPI2_FLASH_REGION_INIT (MPI2_FLASH_REGION_COMMON_BOOT_BLOCK) -#define MPI2_FLASH_REGION_CBB_BACKUP (0x0D) -#define MPI2_FLASH_REGION_SBR (0x0E) -#define MPI2_FLASH_REGION_SBR_BACKUP (0x0F) -#define MPI2_FLASH_REGION_HIIM (0x10) -#define MPI2_FLASH_REGION_HIIA (0x11) -#define MPI2_FLASH_REGION_CTLR (0x12) -#define MPI2_FLASH_REGION_IMR_FIRMWARE (0x13) -#define MPI2_FLASH_REGION_MR_NVDATA (0x14) - -/*ImageRevision */ -#define MPI2_FLASH_LAYOUT_IMAGE_REVISION (0x00) - -/*Supported Devices Extended Image Data */ - -/* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check NumberOfDevices at runtime. - */ -#ifndef MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES -#define MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES (1) -#endif - -typedef struct _MPI2_SUPPORTED_DEVICE { - U16 DeviceID; /*0x00 */ - U16 VendorID; /*0x02 */ - U16 DeviceIDMask; /*0x04 */ - U16 Reserved1; /*0x06 */ - U8 LowPCIRev; /*0x08 */ - U8 HighPCIRev; /*0x09 */ - U16 Reserved2; /*0x0A */ - U32 Reserved3; /*0x0C */ -} MPI2_SUPPORTED_DEVICE, *PTR_MPI2_SUPPORTED_DEVICE, - Mpi2SupportedDevice_t, *pMpi2SupportedDevice_t; - -typedef struct _MPI2_SUPPORTED_DEVICES_DATA { - U8 ImageRevision; /*0x00 */ - U8 Reserved1; /*0x01 */ - U8 NumberOfDevices; /*0x02 */ - U8 Reserved2; /*0x03 */ - U32 Reserved3; /*0x04 */ - MPI2_SUPPORTED_DEVICE - SupportedDevice[MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES];/*0x08 */ -} MPI2_SUPPORTED_DEVICES_DATA, *PTR_MPI2_SUPPORTED_DEVICES_DATA, - Mpi2SupportedDevicesData_t, *pMpi2SupportedDevicesData_t; - -/*ImageRevision */ -#define MPI2_SUPPORTED_DEVICES_IMAGE_REVISION (0x00) - -/*Init Extended Image Data */ - -typedef struct _MPI2_INIT_IMAGE_FOOTER { - U32 BootFlags; /*0x00 */ - U32 ImageSize; /*0x04 */ - U32 Signature0; /*0x08 */ - U32 Signature1; /*0x0C */ - U32 Signature2; /*0x10 */ - U32 ResetVector; /*0x14 */ -} MPI2_INIT_IMAGE_FOOTER, *PTR_MPI2_INIT_IMAGE_FOOTER, - Mpi2InitImageFooter_t, *pMpi2InitImageFooter_t; - -/*defines for the BootFlags field */ -#define MPI2_INIT_IMAGE_BOOTFLAGS_OFFSET (0x00) - -/*defines for the ImageSize field */ -#define MPI2_INIT_IMAGE_IMAGESIZE_OFFSET (0x04) - -/*defines for the Signature0 field */ -#define MPI2_INIT_IMAGE_SIGNATURE0_OFFSET (0x08) -#define MPI2_INIT_IMAGE_SIGNATURE0 (0x5AA55AEA) - -/*defines for the Signature1 field */ -#define MPI2_INIT_IMAGE_SIGNATURE1_OFFSET (0x0C) -#define MPI2_INIT_IMAGE_SIGNATURE1 (0xA55AEAA5) - -/*defines for the Signature2 field */ -#define MPI2_INIT_IMAGE_SIGNATURE2_OFFSET (0x10) -#define MPI2_INIT_IMAGE_SIGNATURE2 (0x5AEAA55A) - -/*Signature fields as individual bytes */ -#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_0 (0xEA) -#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_1 (0x5A) -#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_2 (0xA5) -#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_3 (0x5A) - -#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_4 (0xA5) -#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_5 (0xEA) -#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_6 (0x5A) -#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_7 (0xA5) - -#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_8 (0x5A) -#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_9 (0xA5) -#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_A (0xEA) -#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_B (0x5A) - -/*defines for the ResetVector field */ -#define MPI2_INIT_IMAGE_RESETVECTOR_OFFSET (0x14) - - -/* Encrypted Hash Extended Image Data */ - -typedef struct _MPI25_ENCRYPTED_HASH_ENTRY { - U8 HashImageType; /* 0x00 */ - U8 HashAlgorithm; /* 0x01 */ - U8 EncryptionAlgorithm; /* 0x02 */ - U8 Reserved1; /* 0x03 */ - U32 Reserved2; /* 0x04 */ - U32 EncryptedHash[1]; /* 0x08 */ /* variable length */ -} MPI25_ENCRYPTED_HASH_ENTRY, *PTR_MPI25_ENCRYPTED_HASH_ENTRY, -Mpi25EncryptedHashEntry_t, *pMpi25EncryptedHashEntry_t; - -/* values for HashImageType */ -#define MPI25_HASH_IMAGE_TYPE_UNUSED (0x00) -#define MPI25_HASH_IMAGE_TYPE_FIRMWARE (0x01) -#define MPI25_HASH_IMAGE_TYPE_BIOS (0x02) - -/* values for HashAlgorithm */ -#define MPI25_HASH_ALGORITHM_UNUSED (0x00) -#define MPI25_HASH_ALGORITHM_SHA256 (0x01) - -/* values for EncryptionAlgorithm */ -#define MPI25_ENCRYPTION_ALG_UNUSED (0x00) -#define MPI25_ENCRYPTION_ALG_RSA256 (0x01) - -typedef struct _MPI25_ENCRYPTED_HASH_DATA { - U8 ImageVersion; /* 0x00 */ - U8 NumHash; /* 0x01 */ - U16 Reserved1; /* 0x02 */ - U32 Reserved2; /* 0x04 */ - MPI25_ENCRYPTED_HASH_ENTRY EncryptedHashEntry[1]; /* 0x08 */ -} MPI25_ENCRYPTED_HASH_DATA, *PTR_MPI25_ENCRYPTED_HASH_DATA, -Mpi25EncryptedHashData_t, *pMpi25EncryptedHashData_t; - /**************************************************************************** * PowerManagementControl message diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_pci.h b/drivers/scsi/mpt3sas/mpi/mpi2_pci.h index f0281f943ec9..63a09509d7d1 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_pci.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_pci.h @@ -1,12 +1,12 @@ /* - * Copyright 2012-2015 Avago Technologies. All rights reserved. + * Copyright 2000-2020 Broadcom Inc. All rights reserved. * * * Name: mpi2_pci.h * Title: MPI PCIe Attached Devices structures and definitions. * Creation Date: October 9, 2012 * - * mpi2_pci.h Version: 02.00.02 + * mpi2_pci.h Version: 02.00.03 * * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 * prefix are for use only on MPI v2.5 products, and must not be used @@ -23,6 +23,7 @@ * Removed SOP support. * 07-01-16 02.00.02 Added MPI26_NVME_FLAGS_FORCE_ADMIN_ERR_RESP to * NVME Encapsulated Request. + * 07-22-18 02.00.03 Updted flags field for NVME Encapsulated req * -------------------------------------------------------------------------- */ @@ -75,10 +76,10 @@ typedef struct _MPI26_NVME_ENCAPSULATED_REQUEST { #define MPI26_NVME_FLAGS_SUBMISSIONQ_ADMIN (0x0010) /*Error Response Address Space */ #define MPI26_NVME_FLAGS_MASK_ERROR_RSP_ADDR (0x000C) +#define MPI26_NVME_FLAGS_MASK_ERROR_RSP_ADDR_MASK (0x000C) #define MPI26_NVME_FLAGS_SYSTEM_RSP_ADDR (0x0000) -#define MPI26_NVME_FLAGS_IOCPLB_RSP_ADDR (0x0008) -#define MPI26_NVME_FLAGS_IOCPLBNTA_RSP_ADDR (0x000C) -/*Data Direction*/ +#define MPI26_NVME_FLAGS_IOCCTL_RSP_ADDR (0x0008) +/* Data Direction*/ #define MPI26_NVME_FLAGS_DATADIRECTION_MASK (0x0003) #define MPI26_NVME_FLAGS_NODATATRANSFER (0x0000) #define MPI26_NVME_FLAGS_WRITE (0x0001) diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_raid.h b/drivers/scsi/mpt3sas/mpi/mpi2_raid.h index b9bb1c178f12..b770eb516c14 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_raid.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_raid.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* - * Copyright 2000-2014 Avago Technologies. All rights reserved. + * Copyright 2000-2020 Broadcom Inc. All rights reserved. * * * Name: mpi2_raid.h diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_sas.h b/drivers/scsi/mpt3sas/mpi/mpi2_sas.h index afa17ff246b4..16c922a8a02b 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_sas.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_sas.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* - * Copyright 2000-2015 Avago Technologies. All rights reserved. + * Copyright 2000-2020 Broadcom Inc. All rights reserved. * * * Name: mpi2_sas.h diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_tool.h b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h index 629296ee9236..3f966b6796b3 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_tool.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h @@ -1,13 +1,13 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* - * Copyright 2000-2014 Avago Technologies. All rights reserved. + * Copyright 2000-2020 Broadcom Inc. All rights reserved. * * * Name: mpi2_tool.h * Title: MPI diagnostic tool structures and definitions * Creation Date: March 26, 2007 * - * mpi2_tool.h Version: 02.00.14 + * mpi2_tool.h Version: 02.00.15 * * Version History * --------------- @@ -38,6 +38,8 @@ * 11-18-14 02.00.13 Updated copyright information. * 08-25-16 02.00.14 Added new values for the Flags field of Toolbox Clean * Tool Request Message. + * 07-22-18 02.00.15 Added defines for new TOOLBOX_PCIE_LANE_MARGINING tool. + * Added option for DeviceInfo field in ISTWI tool. * -------------------------------------------------------------------------- */ @@ -58,6 +60,7 @@ #define MPI2_TOOLBOX_BEACON_TOOL (0x05) #define MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL (0x06) #define MPI2_TOOLBOX_TEXT_DISPLAY_TOOL (0x07) +#define MPI26_TOOLBOX_BACKEND_PCIE_LANE_MARGIN (0x08) /**************************************************************************** * Toolbox reply @@ -226,6 +229,13 @@ typedef struct _MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST { #define MPI2_TOOL_ISTWI_FLAG_AUTO_RESERVE_RELEASE (0x80) #define MPI2_TOOL_ISTWI_FLAG_PAGE_ADDR_MASK (0x07) +/*MPI26 TOOLBOX Request MsgFlags defines */ +#define MPI26_TOOLBOX_REQ_MSGFLAGS_ADDRESSING_MASK (0x01) +/*Request uses Man Page 43 device index addressing */ +#define MPI26_TOOLBOX_REQ_MSGFLAGS_ADDRESSING_DEVINDEX (0x00) +/*Request uses Man Page 43 device info struct addressing */ +#define MPI26_TOOLBOX_REQ_MSGFLAGS_ADDRESSING_DEVINFO (0x01) + /*Toolbox ISTWI Read Write Tool reply message */ typedef struct _MPI2_TOOLBOX_ISTWI_REPLY { U8 Tool; /*0x00 */ @@ -387,6 +397,64 @@ Mpi2ToolboxTextDisplayRequest_t, #define MPI2_TOOLBOX_CONSOLE_FLAG_TIMESTAMP (0x01) +/*************************************************************************** + * Toolbox Backend Lane Margining Tool + *************************************************************************** + */ + +/*Toolbox Backend Lane Margining Tool request message */ +typedef struct _MPI26_TOOLBOX_LANE_MARGINING_REQUEST { + U8 Tool; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U8 Command; /*0x0C */ + U8 SwitchPort; /*0x0D */ + U16 DevHandle; /*0x0E */ + U8 RegisterOffset; /*0x10 */ + U8 Reserved5; /*0x11 */ + U16 DataLength; /*0x12 */ + MPI25_SGE_IO_UNION SGL; /*0x14 */ +} MPI26_TOOLBOX_LANE_MARGINING_REQUEST, + *PTR_MPI2_TOOLBOX_LANE_MARGINING_REQUEST, + Mpi26ToolboxLaneMarginingRequest_t, + *pMpi2ToolboxLaneMarginingRequest_t; + +/* defines for the Command field */ +#define MPI26_TOOL_MARGIN_COMMAND_ENTER_MARGIN_MODE (0x01) +#define MPI26_TOOL_MARGIN_COMMAND_READ_REGISTER_DATA (0x02) +#define MPI26_TOOL_MARGIN_COMMAND_WRITE_REGISTER_DATA (0x03) +#define MPI26_TOOL_MARGIN_COMMAND_EXIT_MARGIN_MODE (0x04) + + +/*Toolbox Backend Lane Margining Tool reply message */ +typedef struct _MPI26_TOOLBOX_LANE_MARGINING_REPLY { + U8 Tool; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 Reserved2; /*0x04 */ + U8 Reserved3; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved4; /*0x0A */ + U16 Reserved5; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U16 ReturnedDataLength; /*0x14 */ + U16 Reserved6; /*0x16 */ +} MPI26_TOOLBOX_LANE_MARGINING_REPLY, + *PTR_MPI26_TOOLBOX_LANE_MARGINING_REPLY, + Mpi26ToolboxLaneMarginingReply_t, + *pMpi26ToolboxLaneMarginingReply_t; + /***************************************************************************** * |