diff options
Diffstat (limited to 'drivers/scsi/NCR5380.c')
-rw-r--r-- | drivers/scsi/NCR5380.c | 194 |
1 files changed, 111 insertions, 83 deletions
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c index 08319164f012..2c9133f4c386 100644 --- a/drivers/scsi/NCR5380.c +++ b/drivers/scsi/NCR5380.c @@ -244,6 +244,9 @@ static inline void initialize_SCp(struct scsi_cmnd *cmd) cmd->SCp.ptr = NULL; cmd->SCp.this_residual = 0; } + + cmd->SCp.Status = 0; + cmd->SCp.Message = 0; } /** @@ -622,6 +625,8 @@ static int NCR5380_init(struct Scsi_Host *instance, int flags) #endif spin_lock_init(&hostdata->lock); hostdata->connected = NULL; + hostdata->sensing = NULL; + INIT_LIST_HEAD(&hostdata->autosense); INIT_LIST_HEAD(&hostdata->unissued); INIT_LIST_HEAD(&hostdata->disconnected); @@ -738,6 +743,16 @@ static void complete_cmd(struct Scsi_Host *instance, dsprintk(NDEBUG_QUEUES, instance, "complete_cmd: cmd %p\n", cmd); + if (hostdata->sensing == cmd) { + /* Autosense processing ends here */ + if ((cmd->result & 0xff) != SAM_STAT_GOOD) { + scsi_eh_restore_cmnd(cmd, &hostdata->ses); + set_host_byte(cmd, DID_ERROR); + } else + scsi_eh_restore_cmnd(cmd, &hostdata->ses); + hostdata->sensing = NULL; + } + hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun); cmd->scsi_done(cmd); @@ -798,6 +813,64 @@ static int NCR5380_queue_command(struct Scsi_Host *instance, } /** + * dequeue_next_cmd - dequeue a command for processing + * @instance: the scsi host instance + * + * Priority is given to commands on the autosense queue. These commands + * need autosense because of a CHECK CONDITION result. + * + * Returns a command pointer if a command is found for a target that is + * not already busy. Otherwise returns NULL. + */ + +static struct scsi_cmnd *dequeue_next_cmd(struct Scsi_Host *instance) +{ + struct NCR5380_hostdata *hostdata = shost_priv(instance); + struct NCR5380_cmd *ncmd; + struct scsi_cmnd *cmd; + + if (list_empty(&hostdata->autosense)) { + list_for_each_entry(ncmd, &hostdata->unissued, list) { + cmd = NCR5380_to_scmd(ncmd); + dsprintk(NDEBUG_QUEUES, instance, "dequeue: cmd=%p target=%d busy=0x%02x lun=%llu\n", + cmd, scmd_id(cmd), hostdata->busy[scmd_id(cmd)], cmd->device->lun); + + if (!(hostdata->busy[scmd_id(cmd)] & (1 << cmd->device->lun))) { + list_del(&ncmd->list); + dsprintk(NDEBUG_QUEUES, instance, + "dequeue: removed %p from issue queue\n", cmd); + return cmd; + } + } + } else { + /* Autosense processing begins here */ + ncmd = list_first_entry(&hostdata->autosense, + struct NCR5380_cmd, list); + list_del(&ncmd->list); + cmd = NCR5380_to_scmd(ncmd); + dsprintk(NDEBUG_QUEUES, instance, + "dequeue: removed %p from autosense queue\n", cmd); + scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0); + hostdata->sensing = cmd; + return cmd; + } + return NULL; +} + +static void requeue_cmd(struct Scsi_Host *instance, struct scsi_cmnd *cmd) +{ + struct NCR5380_hostdata *hostdata = shost_priv(instance); + struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd); + + if (hostdata->sensing) { + scsi_eh_restore_cmnd(cmd, &hostdata->ses); + list_add(&ncmd->list, &hostdata->autosense); + hostdata->sensing = NULL; + } else + list_add(&ncmd->list, &hostdata->unissued); +} + +/** * NCR5380_main - NCR state machines * * NCR5380_main is a coroutine that runs as long as more work can @@ -814,63 +887,40 @@ static void NCR5380_main(struct work_struct *work) struct NCR5380_hostdata *hostdata = container_of(work, struct NCR5380_hostdata, main_task); struct Scsi_Host *instance = hostdata->host; - struct NCR5380_cmd *ncmd, *n; + struct scsi_cmnd *cmd; int done; spin_lock_irq(&hostdata->lock); do { done = 1; - if (!hostdata->connected) { - dprintk(NDEBUG_MAIN, "scsi%d : not connected\n", instance->host_no); - /* - * Search through the issue_queue for a command destined - * for a target that's not busy. - */ - list_for_each_entry_safe(ncmd, n, &hostdata->unissued, - list) { - struct scsi_cmnd *tmp = NCR5380_to_scmd(ncmd); - - dsprintk(NDEBUG_QUEUES, instance, "main: tmp=%p target=%d busy=%d lun=%llu\n", - tmp, scmd_id(tmp), hostdata->busy[scmd_id(tmp)], - tmp->device->lun); - /* When we find one, remove it from the issue queue. */ - if (!(hostdata->busy[tmp->device->id] & - (1 << (u8)(tmp->device->lun & 0xff)))) { - list_del(&ncmd->list); - dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES, - instance, "main: removed %p from issue queue\n", - tmp); + while (!hostdata->connected && + (cmd = dequeue_next_cmd(instance))) { - /* - * Attempt to establish an I_T_L nexus here. - * On success, instance->hostdata->connected is set. - * On failure, we must add the command back to the - * issue queue so we can keep trying. - */ - /* - * REQUEST SENSE commands are issued without tagged - * queueing, even on SCSI-II devices because the - * contingent allegiance condition exists for the - * entire unit. - */ + dsprintk(NDEBUG_MAIN, instance, "main: dequeued %p\n", cmd); - if (!NCR5380_select(instance, tmp)) { - /* OK or bad target */ - } else { - /* Need to retry */ - list_add(&ncmd->list, &hostdata->unissued); - dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES, - instance, "main: select() failed, %p returned to issue queue\n", - tmp); - done = 0; - } - if (hostdata->connected) - break; - } /* if target/lun is not busy */ - } /* for */ - } /* if (!hostdata->connected) */ + /* + * Attempt to establish an I_T_L nexus here. + * On success, instance->hostdata->connected is set. + * On failure, we must add the command back to the + * issue queue so we can keep trying. + */ + /* + * REQUEST SENSE commands are issued without tagged + * queueing, even on SCSI-II devices because the + * contingent allegiance condition exists for the + * entire unit. + */ + if (!NCR5380_select(instance, cmd)) { + dsprintk(NDEBUG_MAIN, instance, "main: selected target %d for command %p\n", + scmd_id(cmd), cmd); + } else { + dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES, instance, + "main: select failed, returning %p to queue\n", cmd); + requeue_cmd(instance, cmd); + } + } if (hostdata->connected #ifdef REAL_DMA && !hostdata->dmalen @@ -1853,43 +1903,21 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) { hostdata->connected = NULL; - /* - * I'm not sure what the correct thing to do here is : - * - * If the command that just executed is NOT a request - * sense, the obvious thing to do is to set the result - * code to the values of the stored parameters. - * - * If it was a REQUEST SENSE command, we need some way - * to differentiate between the failure code of the original - * and the failure code of the REQUEST sense - the obvious - * case is success, where we fall through and leave the result - * code unchanged. - * - * The non-obvious place is where the REQUEST SENSE failed - */ - - if (cmd->cmnd[0] != REQUEST_SENSE) - cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8); - else if (status_byte(cmd->SCp.Status) != GOOD) - cmd->result = (cmd->result & 0x00ffff) | (DID_ERROR << 16); - - if ((cmd->cmnd[0] == REQUEST_SENSE) && - hostdata->ses.cmd_len) { - scsi_eh_restore_cmnd(cmd, &hostdata->ses); - hostdata->ses.cmd_len = 0 ; - } - - if ((cmd->cmnd[0] != REQUEST_SENSE) && (status_byte(cmd->SCp.Status) == CHECK_CONDITION)) { - scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0); + cmd->result &= ~0xffff; + cmd->result |= cmd->SCp.Status; + cmd->result |= cmd->SCp.Message << 8; - list_add(&ncmd->list, &hostdata->unissued); - dsprintk(NDEBUG_AUTOSENSE | NDEBUG_QUEUES, - instance, "REQUEST SENSE cmd %p added to head of issue queue\n", - cmd); - hostdata->busy[cmd->device->id] &= ~(1 << (cmd->device->lun & 0xFF)); - } else { + if (cmd->cmnd[0] == REQUEST_SENSE) complete_cmd(instance, cmd); + else { + if (cmd->SCp.Status == SAM_STAT_CHECK_CONDITION || + cmd->SCp.Status == SAM_STAT_COMMAND_TERMINATED) { + dsprintk(NDEBUG_QUEUES, instance, "autosense: adding cmd %p to tail of autosense queue\n", + cmd); + list_add_tail(&ncmd->list, + &hostdata->autosense); + } else + complete_cmd(instance, cmd); } /* |