diff options
Diffstat (limited to 'drivers/rtc/rtc-imxdi.c')
| -rw-r--r-- | drivers/rtc/rtc-imxdi.c | 50 |
1 files changed, 43 insertions, 7 deletions
diff --git a/drivers/rtc/rtc-imxdi.c b/drivers/rtc/rtc-imxdi.c index 42f5570f42f8..c666eab98273 100644 --- a/drivers/rtc/rtc-imxdi.c +++ b/drivers/rtc/rtc-imxdi.c @@ -50,22 +50,58 @@ #define DCAMR_UNSET 0xFFFFFFFF /* doomsday - 1 sec */ #define DCR 0x10 /* Control Reg */ +#define DCR_TDCHL (1 << 30) /* Tamper-detect configuration hard lock */ +#define DCR_TDCSL (1 << 29) /* Tamper-detect configuration soft lock */ +#define DCR_KSSL (1 << 27) /* Key-select soft lock */ +#define DCR_MCHL (1 << 20) /* Monotonic-counter hard lock */ +#define DCR_MCSL (1 << 19) /* Monotonic-counter soft lock */ +#define DCR_TCHL (1 << 18) /* Timer-counter hard lock */ +#define DCR_TCSL (1 << 17) /* Timer-counter soft lock */ +#define DCR_FSHL (1 << 16) /* Failure state hard lock */ #define DCR_TCE (1 << 3) /* Time Counter Enable */ +#define DCR_MCE (1 << 2) /* Monotonic Counter Enable */ #define DSR 0x14 /* Status Reg */ -#define DSR_WBF (1 << 10) /* Write Busy Flag */ -#define DSR_WNF (1 << 9) /* Write Next Flag */ -#define DSR_WCF (1 << 8) /* Write Complete Flag */ +#define DSR_WTD (1 << 23) /* Wire-mesh tamper detected */ +#define DSR_ETBD (1 << 22) /* External tamper B detected */ +#define DSR_ETAD (1 << 21) /* External tamper A detected */ +#define DSR_EBD (1 << 20) /* External boot detected */ +#define DSR_SAD (1 << 19) /* SCC alarm detected */ +#define DSR_TTD (1 << 18) /* Temperatur tamper detected */ +#define DSR_CTD (1 << 17) /* Clock tamper detected */ +#define DSR_VTD (1 << 16) /* Voltage tamper detected */ +#define DSR_WBF (1 << 10) /* Write Busy Flag (synchronous) */ +#define DSR_WNF (1 << 9) /* Write Next Flag (synchronous) */ +#define DSR_WCF (1 << 8) /* Write Complete Flag (synchronous)*/ #define DSR_WEF (1 << 7) /* Write Error Flag */ #define DSR_CAF (1 << 4) /* Clock Alarm Flag */ +#define DSR_MCO (1 << 3) /* monotonic counter overflow */ +#define DSR_TCO (1 << 2) /* time counter overflow */ #define DSR_NVF (1 << 1) /* Non-Valid Flag */ #define DSR_SVF (1 << 0) /* Security Violation Flag */ -#define DIER 0x18 /* Interrupt Enable Reg */ +#define DIER 0x18 /* Interrupt Enable Reg (synchronous) */ #define DIER_WNIE (1 << 9) /* Write Next Interrupt Enable */ #define DIER_WCIE (1 << 8) /* Write Complete Interrupt Enable */ #define DIER_WEIE (1 << 7) /* Write Error Interrupt Enable */ #define DIER_CAIE (1 << 4) /* Clock Alarm Interrupt Enable */ +#define DIER_SVIE (1 << 0) /* Security-violation Interrupt Enable */ + +#define DMCR 0x1c /* DryIce Monotonic Counter Reg */ + +#define DTCR 0x28 /* DryIce Tamper Configuration Reg */ +#define DTCR_MOE (1 << 9) /* monotonic overflow enabled */ +#define DTCR_TOE (1 << 8) /* time overflow enabled */ +#define DTCR_WTE (1 << 7) /* wire-mesh tamper enabled */ +#define DTCR_ETBE (1 << 6) /* external B tamper enabled */ +#define DTCR_ETAE (1 << 5) /* external A tamper enabled */ +#define DTCR_EBE (1 << 4) /* external boot tamper enabled */ +#define DTCR_SAIE (1 << 3) /* SCC enabled */ +#define DTCR_TTE (1 << 2) /* temperature tamper enabled */ +#define DTCR_CTE (1 << 1) /* clock tamper enabled */ +#define DTCR_VTE (1 << 0) /* voltage tamper enabled */ + +#define DGPR 0x3c /* DryIce General Purpose Reg */ /** * struct imxdi_dev - private imxdi rtc data @@ -313,7 +349,7 @@ static irqreturn_t dryice_norm_irq(int irq, void *dev_id) dier = __raw_readl(imxdi->ioaddr + DIER); /* handle write complete and write error cases */ - if ((dier & DIER_WCIE)) { + if (dier & DIER_WCIE) { /*If the write wait queue is empty then there is no pending operations. It means the interrupt is for DryIce -Security. IRQ must be returned as none.*/ @@ -322,7 +358,7 @@ static irqreturn_t dryice_norm_irq(int irq, void *dev_id) /* DSR_WCF clears itself on DSR read */ dsr = __raw_readl(imxdi->ioaddr + DSR); - if ((dsr & (DSR_WCF | DSR_WEF))) { + if (dsr & (DSR_WCF | DSR_WEF)) { /* mask the interrupt */ di_int_disable(imxdi, DIER_WCIE); @@ -335,7 +371,7 @@ static irqreturn_t dryice_norm_irq(int irq, void *dev_id) } /* handle the alarm case */ - if ((dier & DIER_CAIE)) { + if (dier & DIER_CAIE) { /* DSR_WCF clears itself on DSR read */ dsr = __raw_readl(imxdi->ioaddr + DSR); if (dsr & DSR_CAF) { |