diff options
Diffstat (limited to 'drivers/reset')
| -rw-r--r-- | drivers/reset/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/reset/Makefile | 1 | ||||
| -rw-r--r-- | drivers/reset/reset-imx7.c | 14 | ||||
| -rw-r--r-- | drivers/reset/reset-raspberrypi.c | 122 |
4 files changed, 141 insertions, 7 deletions
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 19f9773133dd..07d162b179fc 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -141,6 +141,17 @@ config RESET_QCOM_PDC to control reset signals provided by PDC for Modem, Compute, Display, GPU, Debug, AOP, Sensors, Audio, SP and APPS. +config RESET_RASPBERRYPI + tristate "Raspberry Pi 4 Firmware Reset Driver" + depends on RASPBERRYPI_FIRMWARE || (RASPBERRYPI_FIRMWARE=n && COMPILE_TEST) + default USB_XHCI_PCI + help + Raspberry Pi 4's co-processor controls some of the board's HW + initialization process, but it's up to Linux to trigger it when + relevant. This driver provides a reset controller capable of + interfacing with RPi4's co-processor and model these firmware + initialization routines as reset lines. + config RESET_SCMI tristate "Reset driver controlled via ARM SCMI interface" depends on ARM_SCMI_PROTOCOL || COMPILE_TEST diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index 249ed357c997..16947610cc3b 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o obj-$(CONFIG_RESET_QCOM_PDC) += reset-qcom-pdc.o +obj-$(CONFIG_RESET_RASPBERRYPI) += reset-raspberrypi.o obj-$(CONFIG_RESET_SCMI) += reset-scmi.o obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o diff --git a/drivers/reset/reset-imx7.c b/drivers/reset/reset-imx7.c index b60534a1e0ef..185a333df66c 100644 --- a/drivers/reset/reset-imx7.c +++ b/drivers/reset/reset-imx7.c @@ -225,7 +225,7 @@ static int imx8mq_reset_set(struct reset_controller_dev *rcdev, switch (id) { case IMX8MQ_RESET_PCIEPHY: - case IMX8MQ_RESET_PCIEPHY2: /* fallthrough */ + case IMX8MQ_RESET_PCIEPHY2: /* * wait for more than 10us to release phy g_rst and * btnrst @@ -235,12 +235,12 @@ static int imx8mq_reset_set(struct reset_controller_dev *rcdev, break; case IMX8MQ_RESET_PCIE_CTRL_APPS_EN: - case IMX8MQ_RESET_PCIE2_CTRL_APPS_EN: /* fallthrough */ - case IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N: /* fallthrough */ - case IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N: /* fallthrough */ - case IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N: /* fallthrough */ - case IMX8MQ_RESET_MIPI_DSI_RESET_N: /* fallthrough */ - case IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N: /* fallthrough */ + case IMX8MQ_RESET_PCIE2_CTRL_APPS_EN: + case IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N: + case IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N: + case IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N: + case IMX8MQ_RESET_MIPI_DSI_RESET_N: + case IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N: case IMX8MQ_RESET_M4_ENABLE: value = assert ? 0 : bit; break; diff --git a/drivers/reset/reset-raspberrypi.c b/drivers/reset/reset-raspberrypi.c new file mode 100644 index 000000000000..02f59c06f69b --- /dev/null +++ b/drivers/reset/reset-raspberrypi.c @@ -0,0 +1,122 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Raspberry Pi 4 firmware reset driver + * + * Copyright (C) 2020 Nicolas Saenz Julienne <nsaenzjulienne@suse.de> + */ +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/reset-controller.h> +#include <soc/bcm2835/raspberrypi-firmware.h> +#include <dt-bindings/reset/raspberrypi,firmware-reset.h> + +struct rpi_reset { + struct reset_controller_dev rcdev; + struct rpi_firmware *fw; +}; + +static inline struct rpi_reset *to_rpi(struct reset_controller_dev *rcdev) +{ + return container_of(rcdev, struct rpi_reset, rcdev); +} + +static int rpi_reset_reset(struct reset_controller_dev *rcdev, unsigned long id) +{ + struct rpi_reset *priv = to_rpi(rcdev); + u32 dev_addr; + int ret; + + switch (id) { + case RASPBERRYPI_FIRMWARE_RESET_ID_USB: + /* + * The Raspberry Pi 4 gets its USB functionality from VL805, a + * PCIe chip that implements xHCI. After a PCI reset, VL805's + * firmware may either be loaded directly from an EEPROM or, if + * not present, by the SoC's co-processor, VideoCore. rpi's + * VideoCore OS contains both the non public firmware load + * logic and the VL805 firmware blob. This triggers the + * aforementioned process. + * + * The pci device address is expected is expected by the + * firmware encoded like this: + * + * PCI_BUS << 20 | PCI_SLOT << 15 | PCI_FUNC << 12 + * + * But since rpi's PCIe is hardwired, we know the address in + * advance. + */ + dev_addr = 0x100000; + ret = rpi_firmware_property(priv->fw, RPI_FIRMWARE_NOTIFY_XHCI_RESET, + &dev_addr, sizeof(dev_addr)); + if (ret) + return ret; + + /* Wait for vl805 to startup */ + usleep_range(200, 1000); + break; + + default: + return -EINVAL; + } + + return 0; +} + +static const struct reset_control_ops rpi_reset_ops = { + .reset = rpi_reset_reset, +}; + +static int rpi_reset_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct rpi_firmware *fw; + struct device_node *np; + struct rpi_reset *priv; + + np = of_get_parent(dev->of_node); + if (!np) { + dev_err(dev, "Missing firmware node\n"); + return -ENOENT; + } + + fw = rpi_firmware_get(np); + of_node_put(np); + if (!fw) + return -EPROBE_DEFER; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + dev_set_drvdata(dev, priv); + + priv->fw = fw; + priv->rcdev.owner = THIS_MODULE; + priv->rcdev.nr_resets = RASPBERRYPI_FIRMWARE_RESET_NUM_IDS; + priv->rcdev.ops = &rpi_reset_ops; + priv->rcdev.of_node = dev->of_node; + + return devm_reset_controller_register(dev, &priv->rcdev); +} + +static const struct of_device_id rpi_reset_of_match[] = { + { .compatible = "raspberrypi,firmware-reset" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, rpi_reset_of_match); + +static struct platform_driver rpi_reset_driver = { + .probe = rpi_reset_probe, + .driver = { + .name = "raspberrypi-reset", + .of_match_table = rpi_reset_of_match, + }, +}; +module_platform_driver(rpi_reset_driver); + +MODULE_AUTHOR("Nicolas Saenz Julienne <nsaenzjulienne@suse.de>"); +MODULE_DESCRIPTION("Raspberry Pi 4 firmware reset driver"); +MODULE_LICENSE("GPL"); |