diff options
Diffstat (limited to 'drivers/pinctrl/pinctrl-eyeq5.c')
| -rw-r--r-- | drivers/pinctrl/pinctrl-eyeq5.c | 575 |
1 files changed, 575 insertions, 0 deletions
diff --git a/drivers/pinctrl/pinctrl-eyeq5.c b/drivers/pinctrl/pinctrl-eyeq5.c new file mode 100644 index 000000000000..5f6af934a516 --- /dev/null +++ b/drivers/pinctrl/pinctrl-eyeq5.c @@ -0,0 +1,575 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Pinctrl driver for the Mobileye EyeQ5 platform. + * + * The registers are located in a syscon region called OLB. There are two pin + * banks, each being controlled by 5 registers (see enum eq5p_regs) for + * pull-down, pull-up, drive strength and muxing. + * + * For each pin, muxing is between two functions: (0) GPIO or (1) another one + * that is pin-dependent. Functions are declared statically in this driver. + * + * We create pinctrl groups that are 1:1 equivalent to pins: each group has a + * single pin, and its index/selector is the pin number. + * + * We use eq5p_ as prefix, as-in "EyeQ5 Pinctrl", but way shorter. + * + * Copyright (C) 2024 Mobileye Vision Technologies Ltd. + */ + +#include <linux/array_size.h> +#include <linux/auxiliary_bus.h> +#include <linux/bits.h> +#include <linux/bug.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/mod_devicetable.h> +#include <linux/seq_file.h> +#include <linux/slab.h> +#include <linux/types.h> + +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> + +#include "core.h" +#include "pinctrl-utils.h" + +struct eq5p_pinctrl { + struct pinctrl_desc desc; + void __iomem *base; +}; + +enum eq5p_bank { + EQ5P_BANK_A, + EQ5P_BANK_B, + + EQ5P_BANK_COUNT, +}; + +enum eq5p_regs { + EQ5P_PD, + EQ5P_PU, + EQ5P_DS_LOW, + EQ5P_DS_HIGH, + EQ5P_IOCR, + + EQ5P_REG_COUNT, +}; + +static const unsigned int eq5p_regs[EQ5P_BANK_COUNT][EQ5P_REG_COUNT] = { + [EQ5P_BANK_A] = {0x0C0, 0x0C4, 0x0D0, 0x0D4, 0x0B0}, + [EQ5P_BANK_B] = {0x0C8, 0x0CC, 0x0D8, 0x0DC, 0x0B4}, +}; + +/* + * Drive strength; two bits per pin. + */ +#define EQ5P_DS_MASK GENMASK(1, 0) + +/* + * Comments to the right of each pin are the "signal name" in the datasheet. + */ +static const struct pinctrl_pin_desc eq5p_pins[] = { + /* Bank A */ + PINCTRL_PIN(0, "PA0"), /* A0_TIMER0_CK */ + PINCTRL_PIN(1, "PA1"), /* A1_TIMER0_EOC */ + PINCTRL_PIN(2, "PA2"), /* A2_TIMER1_CK */ + PINCTRL_PIN(3, "PA3"), /* A3_TIMER1_EOC */ + PINCTRL_PIN(4, "PA4"), /* A4_TIMER2_CK */ + PINCTRL_PIN(5, "PA5"), /* A5_TIMER2_EOC */ + PINCTRL_PIN(6, "PA6"), /* A6_TIMER5_EXT_INCAP1 */ + PINCTRL_PIN(7, "PA7"), /* A7_TIMER5_EXT_INCAP2 */ + PINCTRL_PIN(8, "PA8"), /* A8_TIMER5_EXT_OUTCMP1 */ + PINCTRL_PIN(9, "PA9"), /* A9_TIMER5_EXT_OUTCMP2 */ + PINCTRL_PIN(10, "PA10"), /* A10_UART_0_TX */ + PINCTRL_PIN(11, "PA11"), /* A11_UART_0_RX */ + PINCTRL_PIN(12, "PA12"), /* A12_UART_1_TX */ + PINCTRL_PIN(13, "PA13"), /* A13_UART_1_RX */ + PINCTRL_PIN(14, "PA14"), /* A14_CAN_0_TX */ + PINCTRL_PIN(15, "PA15"), /* A15_CAN_0_RX */ + PINCTRL_PIN(16, "PA16"), /* A16_CAN_1_TX */ + PINCTRL_PIN(17, "PA17"), /* A17_CAN_1_RX */ + PINCTRL_PIN(18, "PA18"), /* A18_SPI_0_DO */ + PINCTRL_PIN(19, "PA19"), /* A19_SPI_0_DI */ + PINCTRL_PIN(20, "PA20"), /* A20_SPI_0_CK */ + PINCTRL_PIN(21, "PA21"), /* A21_SPI_0_CS0 */ + PINCTRL_PIN(22, "PA22"), /* A22_SPI_0_CS1 */ + PINCTRL_PIN(23, "PA23"), /* A23_SPI_1_DO */ + PINCTRL_PIN(24, "PA24"), /* A24_SPI_1_DI */ + PINCTRL_PIN(25, "PA25"), /* A25_SPI_1_CK */ + PINCTRL_PIN(26, "PA26"), /* A26_SPI_1_CS0 */ + PINCTRL_PIN(27, "PA27"), /* A27_SPI_1_CS1 */ + PINCTRL_PIN(28, "PA28"), /* A28_REF_CLK0 */ + +#define EQ5P_PIN_OFFSET_BANK_B 29 + + /* Bank B */ + PINCTRL_PIN(EQ5P_PIN_OFFSET_BANK_B + 0, "PB0"), /* B0_TIMER3_CK */ + PINCTRL_PIN(EQ5P_PIN_OFFSET_BANK_B + 1, "PB1"), /* B1_TIMER3_EOC */ + PINCTRL_PIN(EQ5P_PIN_OFFSET_BANK_B + 2, "PB2"), /* B2_TIMER4_CK */ + PINCTRL_PIN(EQ5P_PIN_OFFSET_BANK_B + 3, "PB3"), /* B3_TIMER4_EOC */ + PINCTRL_PIN(EQ5P_PIN_OFFSET_BANK_B + 4, "PB4"), /* B4_TIMER6_EXT_INCAP1 */ + PINCTRL_PIN(EQ5P_PIN_OFFSET_BANK_B + 5, "PB5"), /* B5_TIMER6_EXT_INCAP2 */ + PINCTRL_PIN(EQ5P_PIN_OFFSET_BANK_B + 6, "PB6"), /* B6_TIMER6_EXT_OUTCMP1 */ + PINCTRL_PIN(EQ5P_PIN_OFFSET_BANK_B + 7, "PB7"), /* B7_TIMER6_EXT_OUTCMP2 */ + PINCTRL_PIN(EQ5P_PIN_OFFSET_BANK_B + 8, "PB8"), /* B8_UART_2_TX */ + PINCTRL_PIN(EQ5P_PIN_OFFSET_BANK_B + 9, "PB9"), /* B9_UART_2_RX */ + PINCTRL_PIN(EQ5P_PIN_OFFSET_BANK_B + 10, "PB10"), /* B10_CAN_2_TX */ + PINCTRL_PIN(EQ5P_PIN_OFFSET_BANK_B + 11, "PB11"), /* B11_CAN_2_RX */ + PINCTRL_PIN(EQ5P_PIN_OFFSET_BANK_B + 12, "PB12"), /* B12_SPI_2_DO */ + PINCTRL_PIN(EQ5P_PIN_OFFSET_BANK_B + 13, "PB13"), /* B13_SPI_2_DI */ + PINCTRL_PIN(EQ5P_PIN_OFFSET_BANK_B + 14, "PB14"), /* B14_SPI_2_CK */ + PINCTRL_PIN(EQ5P_PIN_OFFSET_BANK_B + 15, "PB15"), /* B15_SPI_2_CS0 */ + PINCTRL_PIN(EQ5P_PIN_OFFSET_BANK_B + 16, "PB16"), /* B16_SPI_2_CS1 */ + PINCTRL_PIN(EQ5P_PIN_OFFSET_BANK_B + 17, "PB17"), /* B17_SPI_3_DO */ + PINCTRL_PIN(EQ5P_PIN_OFFSET_BANK_B + 18, "PB18"), /* B18_SPI_3_DI */ + PINCTRL_PIN(EQ5P_PIN_OFFSET_BANK_B + 19, "PB19"), /* B19_SPI_3_CK */ + PINCTRL_PIN(EQ5P_PIN_OFFSET_BANK_B + 20, "PB20"), /* B20_SPI_3_CS0 */ + PINCTRL_PIN(EQ5P_PIN_OFFSET_BANK_B + 21, "PB21"), /* B21_SPI_3_CS1 */ + PINCTRL_PIN(EQ5P_PIN_OFFSET_BANK_B + 22, "PB22"), /* B22_MCLK0 */ +}; + +static const char * const gpio_groups[] = { + /* Bank A */ + "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", + "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", + "PA16", "PA17", "PA18", "PA19", "PA20", "PA21", "PA22", "PA23", + "PA24", "PA25", "PA26", "PA27", "PA28", + + /* Bank B */ + "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", + "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", + "PB16", "PB17", "PB18", "PB19", "PB20", "PB21", "PB22", +}; + +/* Groups of functions on bank A */ +static const char * const timer0_groups[] = { "PA0", "PA1" }; +static const char * const timer1_groups[] = { "PA2", "PA3" }; +static const char * const timer2_groups[] = { "PA4", "PA5" }; +static const char * const timer5_groups[] = { "PA6", "PA7", "PA8", "PA9" }; +static const char * const uart0_groups[] = { "PA10", "PA11" }; +static const char * const uart1_groups[] = { "PA12", "PA13" }; +static const char * const can0_groups[] = { "PA14", "PA15" }; +static const char * const can1_groups[] = { "PA16", "PA17" }; +static const char * const spi0_groups[] = { "PA18", "PA19", "PA20", "PA21", "PA22" }; +static const char * const spi1_groups[] = { "PA23", "PA24", "PA25", "PA26", "PA27" }; +static const char * const refclk0_groups[] = { "PA28" }; + +/* Groups of functions on bank B */ +static const char * const timer3_groups[] = { "PB0", "PB1" }; +static const char * const timer4_groups[] = { "PB2", "PB3" }; +static const char * const timer6_groups[] = { "PB4", "PB5", "PB6", "PB7" }; +static const char * const uart2_groups[] = { "PB8", "PB9" }; +static const char * const can2_groups[] = { "PB10", "PB11" }; +static const char * const spi2_groups[] = { "PB12", "PB13", "PB14", "PB15", "PB16" }; +static const char * const spi3_groups[] = { "PB17", "PB18", "PB19", "PB20", "PB21" }; +static const char * const mclk0_groups[] = { "PB22" }; + +static const struct pinfunction eq5p_functions[] = { + /* GPIO having a fixed index is depended upon, see GPIO_FUNC_SELECTOR. */ + PINCTRL_PINFUNCTION("gpio", gpio_groups, ARRAY_SIZE(gpio_groups)), +#define GPIO_FUNC_SELECTOR 0 + + /* Bank A functions */ + PINCTRL_PINFUNCTION("timer0", timer0_groups, ARRAY_SIZE(timer0_groups)), + PINCTRL_PINFUNCTION("timer1", timer1_groups, ARRAY_SIZE(timer1_groups)), + PINCTRL_PINFUNCTION("timer2", timer2_groups, ARRAY_SIZE(timer2_groups)), + PINCTRL_PINFUNCTION("timer5", timer5_groups, ARRAY_SIZE(timer5_groups)), + PINCTRL_PINFUNCTION("uart0", uart0_groups, ARRAY_SIZE(uart0_groups)), + PINCTRL_PINFUNCTION("uart1", uart1_groups, ARRAY_SIZE(uart1_groups)), + PINCTRL_PINFUNCTION("can0", can0_groups, ARRAY_SIZE(can0_groups)), + PINCTRL_PINFUNCTION("can1", can1_groups, ARRAY_SIZE(can1_groups)), + PINCTRL_PINFUNCTION("spi0", spi0_groups, ARRAY_SIZE(spi0_groups)), + PINCTRL_PINFUNCTION("spi1", spi1_groups, ARRAY_SIZE(spi1_groups)), + PINCTRL_PINFUNCTION("refclk0", refclk0_groups, ARRAY_SIZE(refclk0_groups)), + + /* Bank B functions */ + PINCTRL_PINFUNCTION("timer3", timer3_groups, ARRAY_SIZE(timer3_groups)), + PINCTRL_PINFUNCTION("timer4", timer4_groups, ARRAY_SIZE(timer4_groups)), + PINCTRL_PINFUNCTION("timer6", timer6_groups, ARRAY_SIZE(timer6_groups)), + PINCTRL_PINFUNCTION("uart2", uart2_groups, ARRAY_SIZE(uart2_groups)), + PINCTRL_PINFUNCTION("can2", can2_groups, ARRAY_SIZE(can2_groups)), + PINCTRL_PINFUNCTION("spi2", spi2_groups, ARRAY_SIZE(spi2_groups)), + PINCTRL_PINFUNCTION("spi3", spi3_groups, ARRAY_SIZE(spi3_groups)), + PINCTRL_PINFUNCTION("mclk0", mclk0_groups, ARRAY_SIZE(mclk0_groups)), +}; + +static void eq5p_update_bits(const struct eq5p_pinctrl *pctrl, + enum eq5p_bank bank, enum eq5p_regs reg, + u32 mask, u32 val) +{ + void __iomem *ptr = pctrl->base + eq5p_regs[bank][reg]; + + writel((readl(ptr) & ~mask) | (val & mask), ptr); +} + +static bool eq5p_test_bit(const struct eq5p_pinctrl *pctrl, + enum eq5p_bank bank, enum eq5p_regs reg, int offset) +{ + u32 val = readl(pctrl->base + eq5p_regs[bank][reg]); + + if (WARN_ON(offset > 31)) + return false; + + return (val & BIT(offset)) != 0; +} + +static enum eq5p_bank eq5p_pin_to_bank(unsigned int pin) +{ + if (pin < EQ5P_PIN_OFFSET_BANK_B) + return EQ5P_BANK_A; + else + return EQ5P_BANK_B; +} + +static unsigned int eq5p_pin_to_offset(unsigned int pin) +{ + if (pin < EQ5P_PIN_OFFSET_BANK_B) + return pin; + else + return pin - EQ5P_PIN_OFFSET_BANK_B; +} + +static int eq5p_pinctrl_get_groups_count(struct pinctrl_dev *pctldev) +{ + return ARRAY_SIZE(eq5p_pins); +} + +static const char *eq5p_pinctrl_get_group_name(struct pinctrl_dev *pctldev, + unsigned int selector) +{ + return pctldev->desc->pins[selector].name; +} + +static int eq5p_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, + unsigned int selector, + const unsigned int **pins, + unsigned int *num_pins) +{ + *pins = &pctldev->desc->pins[selector].number; + *num_pins = 1; + return 0; +} + +static int eq5p_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin, + unsigned long *config) +{ + enum pin_config_param param = pinconf_to_config_param(*config); + struct eq5p_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + unsigned int offset = eq5p_pin_to_offset(pin); + enum eq5p_bank bank = eq5p_pin_to_bank(pin); + u32 val_ds, arg; + bool pd, pu; + + pd = eq5p_test_bit(pctrl, bank, EQ5P_PD, offset); + pu = eq5p_test_bit(pctrl, bank, EQ5P_PU, offset); + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + arg = !(pd || pu); + break; + case PIN_CONFIG_BIAS_PULL_DOWN: + arg = pd; + break; + case PIN_CONFIG_BIAS_PULL_UP: + arg = pu; + break; + case PIN_CONFIG_DRIVE_STRENGTH: + offset *= 2; /* two bits per pin */ + if (offset >= 32) { + val_ds = readl(pctrl->base + eq5p_regs[bank][EQ5P_DS_HIGH]); + offset -= 32; + } else { + val_ds = readl(pctrl->base + eq5p_regs[bank][EQ5P_DS_LOW]); + } + arg = (val_ds >> offset) & EQ5P_DS_MASK; + break; + default: + return -ENOTSUPP; + } + + *config = pinconf_to_config_packed(param, arg); + return 0; +} + +static void eq5p_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev, + struct seq_file *s, + unsigned int pin) +{ + struct eq5p_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + const char *pin_name = pctrl->desc.pins[pin].name; + unsigned int offset = eq5p_pin_to_offset(pin); + enum eq5p_bank bank = eq5p_pin_to_bank(pin); + const char *func_name, *bias; + unsigned long ds_config; + u32 drive_strength; + bool pd, pu; + int i, j; + + /* + * First, let's get the function name. All pins have only two functions: + * GPIO (IOCR == 0) and something else (IOCR == 1). + */ + if (eq5p_test_bit(pctrl, bank, EQ5P_IOCR, offset)) { + func_name = NULL; + for (i = 0; i < ARRAY_SIZE(eq5p_functions); i++) { + if (i == GPIO_FUNC_SELECTOR) + continue; + + for (j = 0; j < eq5p_functions[i].ngroups; j++) { + /* Groups and pins are the same thing for us. */ + const char *x = eq5p_functions[i].groups[j]; + + if (strcmp(x, pin_name) == 0) { + func_name = eq5p_functions[i].name; + break; + } + } + + if (func_name) + break; + } + + /* + * We have not found the function attached to this pin, this + * should never occur as all pins have exactly two functions. + */ + if (!func_name) + func_name = "unknown"; + } else { + func_name = eq5p_functions[GPIO_FUNC_SELECTOR].name; + } + + /* Second, we retrieve the bias. */ + pd = eq5p_test_bit(pctrl, bank, EQ5P_PD, offset); + pu = eq5p_test_bit(pctrl, bank, EQ5P_PU, offset); + if (pd && pu) + bias = "both"; + else if (pd && !pu) + bias = "pulldown"; + else if (!pd && pu) + bias = "pullup"; + else + bias = "none"; + + /* Third, we get the drive strength. */ + ds_config = pinconf_to_config_packed(PIN_CONFIG_DRIVE_STRENGTH, 0); + eq5p_pinconf_get(pctldev, pin, &ds_config); + drive_strength = pinconf_to_config_argument(ds_config); + + seq_printf(s, "function=%s bias=%s drive_strength=%d", + func_name, bias, drive_strength); +} + +static const struct pinctrl_ops eq5p_pinctrl_ops = { + .get_groups_count = eq5p_pinctrl_get_groups_count, + .get_group_name = eq5p_pinctrl_get_group_name, + .get_group_pins = eq5p_pinctrl_get_group_pins, + .pin_dbg_show = eq5p_pinctrl_pin_dbg_show, + .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, + .dt_free_map = pinctrl_utils_free_map, +}; + +static int eq5p_pinmux_get_functions_count(struct pinctrl_dev *pctldev) +{ + return ARRAY_SIZE(eq5p_functions); +} + +static const char *eq5p_pinmux_get_function_name(struct pinctrl_dev *pctldev, + unsigned int selector) +{ + return eq5p_functions[selector].name; +} + +static int eq5p_pinmux_get_function_groups(struct pinctrl_dev *pctldev, + unsigned int selector, + const char * const **groups, + unsigned int *num_groups) +{ + *groups = eq5p_functions[selector].groups; + *num_groups = eq5p_functions[selector].ngroups; + return 0; +} + +static int eq5p_pinmux_set_mux(struct pinctrl_dev *pctldev, + unsigned int func_selector, unsigned int pin) +{ + struct eq5p_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + const char *func_name = eq5p_functions[func_selector].name; + const char *group_name = pctldev->desc->pins[pin].name; + bool is_gpio = func_selector == GPIO_FUNC_SELECTOR; + unsigned int offset = eq5p_pin_to_offset(pin); + enum eq5p_bank bank = eq5p_pin_to_bank(pin); + u32 mask, val; + + dev_dbg(pctldev->dev, "func=%s group=%s\n", func_name, group_name); + + mask = BIT(offset); + val = is_gpio ? 0 : mask; + eq5p_update_bits(pctrl, bank, EQ5P_IOCR, mask, val); + return 0; +} + +static int eq5p_pinmux_gpio_request_enable(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned int pin) +{ + /* Pin numbers and group selectors are the same thing in our case. */ + return eq5p_pinmux_set_mux(pctldev, GPIO_FUNC_SELECTOR, pin); +} + +static const struct pinmux_ops eq5p_pinmux_ops = { + .get_functions_count = eq5p_pinmux_get_functions_count, + .get_function_name = eq5p_pinmux_get_function_name, + .get_function_groups = eq5p_pinmux_get_function_groups, + .set_mux = eq5p_pinmux_set_mux, + .gpio_request_enable = eq5p_pinmux_gpio_request_enable, + .strict = true, +}; + +static int eq5p_pinconf_set_drive_strength(struct pinctrl_dev *pctldev, + unsigned int pin, u32 arg) +{ + struct eq5p_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + unsigned int offset = eq5p_pin_to_offset(pin); + enum eq5p_bank bank = eq5p_pin_to_bank(pin); + unsigned int reg; + u32 mask, val; + + if (arg & ~EQ5P_DS_MASK) { + dev_err(pctldev->dev, "Unsupported drive strength: %u\n", arg); + return -EINVAL; + } + + offset *= 2; /* two bits per pin */ + + if (offset >= 32) { + reg = EQ5P_DS_HIGH; + offset -= 32; + } else { + reg = EQ5P_DS_LOW; + } + + mask = EQ5P_DS_MASK << offset; + val = arg << offset; + eq5p_update_bits(pctrl, bank, reg, mask, val); + return 0; +} + +static int eq5p_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, + unsigned long *configs, unsigned int num_configs) +{ + struct eq5p_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + const char *pin_name = pctldev->desc->pins[pin].name; + unsigned int offset = eq5p_pin_to_offset(pin); + enum eq5p_bank bank = eq5p_pin_to_bank(pin); + struct device *dev = pctldev->dev; + u32 val = BIT(offset); + unsigned int i; + + for (i = 0; i < num_configs; i++) { + enum pin_config_param param = pinconf_to_config_param(configs[i]); + u32 arg = pinconf_to_config_argument(configs[i]); + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + dev_dbg(dev, "pin=%s bias_disable\n", pin_name); + + eq5p_update_bits(pctrl, bank, EQ5P_PD, val, 0); + eq5p_update_bits(pctrl, bank, EQ5P_PU, val, 0); + break; + + case PIN_CONFIG_BIAS_PULL_DOWN: + dev_dbg(dev, "pin=%s bias_pull_down arg=%u\n", + pin_name, arg); + + if (arg == 0) /* cannot connect to GND */ + return -ENOTSUPP; + + eq5p_update_bits(pctrl, bank, EQ5P_PD, val, val); + eq5p_update_bits(pctrl, bank, EQ5P_PU, val, 0); + break; + + case PIN_CONFIG_BIAS_PULL_UP: + dev_dbg(dev, "pin=%s bias_pull_up arg=%u\n", + pin_name, arg); + + if (arg == 0) /* cannot connect to VDD */ + return -ENOTSUPP; + + eq5p_update_bits(pctrl, bank, EQ5P_PD, val, 0); + eq5p_update_bits(pctrl, bank, EQ5P_PU, val, val); + break; + + case PIN_CONFIG_DRIVE_STRENGTH: + dev_dbg(dev, "pin=%s drive_strength arg=%u\n", + pin_name, arg); + + eq5p_pinconf_set_drive_strength(pctldev, pin, arg); + break; + + default: + dev_err(dev, "Unsupported pinconf %u\n", param); + return -ENOTSUPP; + } + } + + return 0; +} + +static const struct pinconf_ops eq5p_pinconf_ops = { + .is_generic = true, + .pin_config_get = eq5p_pinconf_get, + .pin_config_set = eq5p_pinconf_set, + /* Pins and groups are equivalent in this driver. */ + .pin_config_group_get = eq5p_pinconf_get, + .pin_config_group_set = eq5p_pinconf_set, +}; + +static int eq5p_probe(struct auxiliary_device *adev, + const struct auxiliary_device_id *id) +{ + struct device *dev = &adev->dev; + struct pinctrl_dev *pctldev; + struct eq5p_pinctrl *pctrl; + int ret; + + pctrl = devm_kzalloc(dev, sizeof(*pctrl), GFP_KERNEL); + if (!pctrl) + return -ENOMEM; + + pctrl->base = (void __iomem *)dev_get_platdata(dev); + pctrl->desc.name = dev_name(dev); + pctrl->desc.pins = eq5p_pins; + pctrl->desc.npins = ARRAY_SIZE(eq5p_pins); + pctrl->desc.pctlops = &eq5p_pinctrl_ops; + pctrl->desc.pmxops = &eq5p_pinmux_ops; + pctrl->desc.confops = &eq5p_pinconf_ops; + pctrl->desc.owner = THIS_MODULE; + + ret = devm_pinctrl_register_and_init(dev, &pctrl->desc, pctrl, &pctldev); + if (ret) + return dev_err_probe(dev, ret, "failed registering pinctrl device\n"); + + ret = pinctrl_enable(pctldev); + if (ret) + return dev_err_probe(dev, ret, "failed enabling pinctrl device\n"); + + return 0; +} + +static const struct auxiliary_device_id eq5p_id_table[] = { + { .name = "clk_eyeq.pinctrl" }, + {} +}; +MODULE_DEVICE_TABLE(auxiliary, eq5p_id_table); + +static struct auxiliary_driver eq5p_driver = { + .probe = eq5p_probe, + .id_table = eq5p_id_table, +}; +module_auxiliary_driver(eq5p_driver); |