diff options
Diffstat (limited to 'drivers/phy/rockchip')
-rw-r--r-- | drivers/phy/rockchip/Kconfig | 1 | ||||
-rw-r--r-- | drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c | 319 |
2 files changed, 100 insertions, 220 deletions
diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig index dbd2de4d28b1..0824b9dd5683 100644 --- a/drivers/phy/rockchip/Kconfig +++ b/drivers/phy/rockchip/Kconfig @@ -39,6 +39,7 @@ config PHY_ROCKCHIP_INNO_DSIDPHY tristate "Rockchip Innosilicon MIPI/LVDS/TTL PHY driver" depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF select GENERIC_PHY + select GENERIC_PHY_MIPI_DPHY help Enable this to support the Rockchip MIPI/LVDS/TTL PHY with Innosilicon IP block. diff --git a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c index fc729ecd3fe9..a7c6c940a3a8 100644 --- a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c +++ b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include <linux/reset.h> #include <linux/phy/phy.h> +#include <linux/phy/phy-mipi-dphy.h> #include <linux/pm_runtime.h> #include <linux/mfd/syscon.h> @@ -167,31 +168,6 @@ #define DSI_PHY_STATUS 0xb0 #define PHY_LOCK BIT(0) -struct mipi_dphy_timing { - unsigned int clkmiss; - unsigned int clkpost; - unsigned int clkpre; - unsigned int clkprepare; - unsigned int clksettle; - unsigned int clktermen; - unsigned int clktrail; - unsigned int clkzero; - unsigned int dtermen; - unsigned int eot; - unsigned int hsexit; - unsigned int hsprepare; - unsigned int hszero; - unsigned int hssettle; - unsigned int hsskip; - unsigned int hstrail; - unsigned int init; - unsigned int lpx; - unsigned int taget; - unsigned int tago; - unsigned int tasure; - unsigned int wakeup; -}; - struct inno_dsidphy { struct device *dev; struct clk *ref_clk; @@ -201,7 +177,9 @@ struct inno_dsidphy { void __iomem *host_base; struct reset_control *rst; enum phy_mode mode; + struct phy_configure_opts_mipi_dphy dphy_cfg; + struct clk *pll_clk; struct { struct clk_hw hw; u8 prediv; @@ -238,37 +216,79 @@ static void phy_update_bits(struct inno_dsidphy *inno, writel(tmp, inno->phy_base + reg); } -static void mipi_dphy_timing_get_default(struct mipi_dphy_timing *timing, - unsigned long period) +static unsigned long inno_dsidphy_pll_calc_rate(struct inno_dsidphy *inno, + unsigned long rate) { - /* Global Operation Timing Parameters */ - timing->clkmiss = 0; - timing->clkpost = 70000 + 52 * period; - timing->clkpre = 8 * period; - timing->clkprepare = 65000; - timing->clksettle = 95000; - timing->clktermen = 0; - timing->clktrail = 80000; - timing->clkzero = 260000; - timing->dtermen = 0; - timing->eot = 0; - timing->hsexit = 120000; - timing->hsprepare = 65000 + 4 * period; - timing->hszero = 145000 + 6 * period; - timing->hssettle = 85000 + 6 * period; - timing->hsskip = 40000; - timing->hstrail = max(8 * period, 60000 + 4 * period); - timing->init = 100000000; - timing->lpx = 60000; - timing->taget = 5 * timing->lpx; - timing->tago = 4 * timing->lpx; - timing->tasure = 2 * timing->lpx; - timing->wakeup = 1000000000; + unsigned long prate = clk_get_rate(inno->ref_clk); + unsigned long best_freq = 0; + unsigned long fref, fout; + u8 min_prediv, max_prediv; + u8 _prediv, best_prediv = 1; + u16 _fbdiv, best_fbdiv = 1; + u32 min_delta = UINT_MAX; + + /* + * The PLL output frequency can be calculated using a simple formula: + * PLL_Output_Frequency = (FREF / PREDIV * FBDIV) / 2 + * PLL_Output_Frequency: it is equal to DDR-Clock-Frequency * 2 + */ + fref = prate / 2; + if (rate > 1000000000UL) + fout = 1000000000UL; + else + fout = rate; + + /* 5Mhz < Fref / prediv < 40MHz */ + min_prediv = DIV_ROUND_UP(fref, 40000000); + max_prediv = fref / 5000000; + + for (_prediv = min_prediv; _prediv <= max_prediv; _prediv++) { + u64 tmp; + u32 delta; + + tmp = (u64)fout * _prediv; + do_div(tmp, fref); + _fbdiv = tmp; + + /* + * The possible settings of feedback divider are + * 12, 13, 14, 16, ~ 511 + */ + if (_fbdiv == 15) + continue; + + if (_fbdiv < 12 || _fbdiv > 511) + continue; + + tmp = (u64)_fbdiv * fref; + do_div(tmp, _prediv); + + delta = abs(fout - tmp); + if (!delta) { + best_prediv = _prediv; + best_fbdiv = _fbdiv; + best_freq = tmp; + break; + } else if (delta < min_delta) { + best_prediv = _prediv; + best_fbdiv = _fbdiv; + best_freq = tmp; + min_delta = delta; + } + } + + if (best_freq) { + inno->pll.prediv = best_prediv; + inno->pll.fbdiv = best_fbdiv; + inno->pll.rate = best_freq; + } + + return best_freq; } static void inno_dsidphy_mipi_mode_enable(struct inno_dsidphy *inno) { - struct mipi_dphy_timing gotp; + struct phy_configure_opts_mipi_dphy *cfg = &inno->dphy_cfg; const struct { unsigned long rate; u8 hs_prepare; @@ -288,12 +308,14 @@ static void inno_dsidphy_mipi_mode_enable(struct inno_dsidphy *inno) { 800000000, 0x21, 0x1f, 0x09, 0x29}, {1000000000, 0x09, 0x20, 0x09, 0x27}, }; - u32 t_txbyteclkhs, t_txclkesc, ui; + u32 t_txbyteclkhs, t_txclkesc; u32 txbyteclkhs, txclkesc, esc_clk_div; u32 hs_exit, clk_post, clk_pre, wakeup, lpx, ta_go, ta_sure, ta_wait; u32 hs_prepare, hs_trail, hs_zero, clk_lane_hs_zero, data_lane_hs_zero; unsigned int i; + inno_dsidphy_pll_calc_rate(inno, cfg->hs_clk_rate); + /* Select MIPI mode */ phy_update_bits(inno, REGISTER_PART_LVDS, 0x03, MODE_ENABLE_MASK, MIPI_MODE_ENABLE); @@ -328,32 +350,27 @@ static void inno_dsidphy_mipi_mode_enable(struct inno_dsidphy *inno) txclkesc = txbyteclkhs / esc_clk_div; t_txclkesc = div_u64(PSEC_PER_SEC, txclkesc); - ui = div_u64(PSEC_PER_SEC, inno->pll.rate); - - memset(&gotp, 0, sizeof(gotp)); - mipi_dphy_timing_get_default(&gotp, ui); - /* * The value of counter for HS Ths-exit * Ths-exit = Tpin_txbyteclkhs * value */ - hs_exit = DIV_ROUND_UP(gotp.hsexit, t_txbyteclkhs); + hs_exit = DIV_ROUND_UP(cfg->hs_exit, t_txbyteclkhs); /* * The value of counter for HS Tclk-post * Tclk-post = Tpin_txbyteclkhs * value */ - clk_post = DIV_ROUND_UP(gotp.clkpost, t_txbyteclkhs); + clk_post = DIV_ROUND_UP(cfg->clk_post, t_txbyteclkhs); /* * The value of counter for HS Tclk-pre * Tclk-pre = Tpin_txbyteclkhs * value */ - clk_pre = DIV_ROUND_UP(gotp.clkpre, t_txbyteclkhs); + clk_pre = DIV_ROUND_UP(cfg->clk_pre, t_txbyteclkhs); /* * The value of counter for HS Tlpx Time * Tlpx = Tpin_txbyteclkhs * (2 + value) */ - lpx = DIV_ROUND_UP(gotp.lpx, t_txbyteclkhs); + lpx = DIV_ROUND_UP(cfg->lpx, t_txbyteclkhs); if (lpx >= 2) lpx -= 2; @@ -362,19 +379,19 @@ static void inno_dsidphy_mipi_mode_enable(struct inno_dsidphy *inno) * Tta-go for turnaround * Tta-go = Ttxclkesc * value */ - ta_go = DIV_ROUND_UP(gotp.tago, t_txclkesc); + ta_go = DIV_ROUND_UP(cfg->ta_go, t_txclkesc); /* * The value of counter for HS Tta-sure * Tta-sure for turnaround * Tta-sure = Ttxclkesc * value */ - ta_sure = DIV_ROUND_UP(gotp.tasure, t_txclkesc); + ta_sure = DIV_ROUND_UP(cfg->ta_sure, t_txclkesc); /* * The value of counter for HS Tta-wait * Tta-wait for turnaround * Tta-wait = Ttxclkesc * value */ - ta_wait = DIV_ROUND_UP(gotp.taget, t_txclkesc); + ta_wait = DIV_ROUND_UP(cfg->ta_get, t_txclkesc); for (i = 0; i < ARRAY_SIZE(timings); i++) if (inno->pll.rate <= timings[i].rate) @@ -479,6 +496,7 @@ static int inno_dsidphy_power_on(struct phy *phy) struct inno_dsidphy *inno = phy_get_drvdata(phy); clk_prepare_enable(inno->pclk_phy); + clk_prepare_enable(inno->ref_clk); pm_runtime_get_sync(inno->dev); /* Bandgap power on */ @@ -524,6 +542,7 @@ static int inno_dsidphy_power_off(struct phy *phy) LVDS_PLL_POWER_OFF | LVDS_BANDGAP_POWER_DOWN); pm_runtime_put(inno->dev); + clk_disable_unprepare(inno->ref_clk); clk_disable_unprepare(inno->pclk_phy); return 0; @@ -546,168 +565,32 @@ static int inno_dsidphy_set_mode(struct phy *phy, enum phy_mode mode, return 0; } -static const struct phy_ops inno_dsidphy_ops = { - .set_mode = inno_dsidphy_set_mode, - .power_on = inno_dsidphy_power_on, - .power_off = inno_dsidphy_power_off, - .owner = THIS_MODULE, -}; - -static unsigned long inno_dsidphy_pll_round_rate(struct inno_dsidphy *inno, - unsigned long prate, - unsigned long rate, - u8 *prediv, u16 *fbdiv) -{ - unsigned long best_freq = 0; - unsigned long fref, fout; - u8 min_prediv, max_prediv; - u8 _prediv, best_prediv = 1; - u16 _fbdiv, best_fbdiv = 1; - u32 min_delta = UINT_MAX; - - /* - * The PLL output frequency can be calculated using a simple formula: - * PLL_Output_Frequency = (FREF / PREDIV * FBDIV) / 2 - * PLL_Output_Frequency: it is equal to DDR-Clock-Frequency * 2 - */ - fref = prate / 2; - if (rate > 1000000000UL) - fout = 1000000000UL; - else - fout = rate; - - /* 5Mhz < Fref / prediv < 40MHz */ - min_prediv = DIV_ROUND_UP(fref, 40000000); - max_prediv = fref / 5000000; - - for (_prediv = min_prediv; _prediv <= max_prediv; _prediv++) { - u64 tmp; - u32 delta; - - tmp = (u64)fout * _prediv; - do_div(tmp, fref); - _fbdiv = tmp; - - /* - * The possible settings of feedback divider are - * 12, 13, 14, 16, ~ 511 - */ - if (_fbdiv == 15) - continue; - - if (_fbdiv < 12 || _fbdiv > 511) - continue; - - tmp = (u64)_fbdiv * fref; - do_div(tmp, _prediv); - - delta = abs(fout - tmp); - if (!delta) { - best_prediv = _prediv; - best_fbdiv = _fbdiv; - best_freq = tmp; - break; - } else if (delta < min_delta) { - best_prediv = _prediv; - best_fbdiv = _fbdiv; - best_freq = tmp; - min_delta = delta; - } - } - - if (best_freq) { - *prediv = best_prediv; - *fbdiv = best_fbdiv; - } - - return best_freq; -} - -static long inno_dsidphy_pll_clk_round_rate(struct clk_hw *hw, - unsigned long rate, - unsigned long *prate) +static int inno_dsidphy_configure(struct phy *phy, + union phy_configure_opts *opts) { - struct inno_dsidphy *inno = hw_to_inno(hw); - unsigned long fout; - u16 fbdiv = 1; - u8 prediv = 1; - - fout = inno_dsidphy_pll_round_rate(inno, *prate, rate, - &prediv, &fbdiv); - - return fout; -} - -static int inno_dsidphy_pll_clk_set_rate(struct clk_hw *hw, - unsigned long rate, - unsigned long parent_rate) -{ - struct inno_dsidphy *inno = hw_to_inno(hw); - unsigned long fout; - u16 fbdiv = 1; - u8 prediv = 1; + struct inno_dsidphy *inno = phy_get_drvdata(phy); + int ret; - fout = inno_dsidphy_pll_round_rate(inno, parent_rate, rate, - &prediv, &fbdiv); + if (inno->mode != PHY_MODE_MIPI_DPHY) + return -EINVAL; - dev_dbg(inno->dev, "fin=%lu, fout=%lu, prediv=%u, fbdiv=%u\n", - parent_rate, fout, prediv, fbdiv); + ret = phy_mipi_dphy_config_validate(&opts->mipi_dphy); + if (ret) + return ret; - inno->pll.prediv = prediv; - inno->pll.fbdiv = fbdiv; - inno->pll.rate = fout; + memcpy(&inno->dphy_cfg, &opts->mipi_dphy, sizeof(inno->dphy_cfg)); return 0; } -static unsigned long -inno_dsidphy_pll_clk_recalc_rate(struct clk_hw *hw, unsigned long prate) -{ - struct inno_dsidphy *inno = hw_to_inno(hw); - - /* PLL_Output_Frequency = (FREF / PREDIV * FBDIV) / 2 */ - return (prate / inno->pll.prediv * inno->pll.fbdiv) / 2; -} - -static const struct clk_ops inno_dsidphy_pll_clk_ops = { - .round_rate = inno_dsidphy_pll_clk_round_rate, - .set_rate = inno_dsidphy_pll_clk_set_rate, - .recalc_rate = inno_dsidphy_pll_clk_recalc_rate, +static const struct phy_ops inno_dsidphy_ops = { + .configure = inno_dsidphy_configure, + .set_mode = inno_dsidphy_set_mode, + .power_on = inno_dsidphy_power_on, + .power_off = inno_dsidphy_power_off, + .owner = THIS_MODULE, }; -static int inno_dsidphy_pll_register(struct inno_dsidphy *inno) -{ - struct device *dev = inno->dev; - struct clk *clk; - const char *parent_name; - struct clk_init_data init; - int ret; - - parent_name = __clk_get_name(inno->ref_clk); - - init.name = "mipi_dphy_pll"; - ret = of_property_read_string(dev->of_node, "clock-output-names", - &init.name); - if (ret < 0) - dev_dbg(dev, "phy should set clock-output-names property\n"); - - init.ops = &inno_dsidphy_pll_clk_ops; - init.parent_names = &parent_name; - init.num_parents = 1; - init.flags = 0; - - inno->pll.hw.init = &init; - clk = devm_clk_register(dev, &inno->pll.hw); - if (IS_ERR(clk)) { - ret = PTR_ERR(clk); - dev_err(dev, "failed to register PLL: %d\n", ret); - return ret; - } - - return devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, - &inno->pll.hw); -} - static int inno_dsidphy_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -764,10 +647,6 @@ static int inno_dsidphy_probe(struct platform_device *pdev) return ret; } - ret = inno_dsidphy_pll_register(inno); - if (ret) - return ret; - pm_runtime_enable(dev); return 0; |