diff options
Diffstat (limited to 'drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.h')
| -rw-r--r-- | drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.h | 168 |
1 files changed, 0 insertions, 168 deletions
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.h b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.h deleted file mode 100644 index ceca654b9338..000000000000 --- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.h +++ /dev/null @@ -1,168 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. - */ - -#ifndef UFS_QCOM_PHY_QMP_14NM_H_ -#define UFS_QCOM_PHY_QMP_14NM_H_ - -#include "phy-qcom-ufs-i.h" - -/* QCOM UFS PHY control registers */ -#define COM_OFF(x) (0x000 + x) -#define PHY_OFF(x) (0xC00 + x) -#define TX_OFF(n, x) (0x400 + (0x400 * n) + x) -#define RX_OFF(n, x) (0x600 + (0x400 * n) + x) - -/* UFS PHY QSERDES COM registers */ -#define QSERDES_COM_BG_TIMER COM_OFF(0x0C) -#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN COM_OFF(0x34) -#define QSERDES_COM_SYS_CLK_CTRL COM_OFF(0x3C) -#define QSERDES_COM_LOCK_CMP1_MODE0 COM_OFF(0x4C) -#define QSERDES_COM_LOCK_CMP2_MODE0 COM_OFF(0x50) -#define QSERDES_COM_LOCK_CMP3_MODE0 COM_OFF(0x54) -#define QSERDES_COM_LOCK_CMP1_MODE1 COM_OFF(0x58) -#define QSERDES_COM_LOCK_CMP2_MODE1 COM_OFF(0x5C) -#define QSERDES_COM_LOCK_CMP3_MODE1 COM_OFF(0x60) -#define QSERDES_COM_CP_CTRL_MODE0 COM_OFF(0x78) -#define QSERDES_COM_CP_CTRL_MODE1 COM_OFF(0x7C) -#define QSERDES_COM_PLL_RCTRL_MODE0 COM_OFF(0x84) -#define QSERDES_COM_PLL_RCTRL_MODE1 COM_OFF(0x88) -#define QSERDES_COM_PLL_CCTRL_MODE0 COM_OFF(0x90) -#define QSERDES_COM_PLL_CCTRL_MODE1 COM_OFF(0x94) -#define QSERDES_COM_SYSCLK_EN_SEL COM_OFF(0xAC) -#define QSERDES_COM_RESETSM_CNTRL COM_OFF(0xB4) -#define QSERDES_COM_LOCK_CMP_EN COM_OFF(0xC8) -#define QSERDES_COM_LOCK_CMP_CFG COM_OFF(0xCC) -#define QSERDES_COM_DEC_START_MODE0 COM_OFF(0xD0) -#define QSERDES_COM_DEC_START_MODE1 COM_OFF(0xD4) -#define QSERDES_COM_DIV_FRAC_START1_MODE0 COM_OFF(0xDC) -#define QSERDES_COM_DIV_FRAC_START2_MODE0 COM_OFF(0xE0) -#define QSERDES_COM_DIV_FRAC_START3_MODE0 COM_OFF(0xE4) -#define QSERDES_COM_DIV_FRAC_START1_MODE1 COM_OFF(0xE8) -#define QSERDES_COM_DIV_FRAC_START2_MODE1 COM_OFF(0xEC) -#define QSERDES_COM_DIV_FRAC_START3_MODE1 COM_OFF(0xF0) -#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0 COM_OFF(0x108) -#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0 COM_OFF(0x10C) -#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1 COM_OFF(0x110) -#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1 COM_OFF(0x114) -#define QSERDES_COM_VCO_TUNE_CTRL COM_OFF(0x124) -#define QSERDES_COM_VCO_TUNE_MAP COM_OFF(0x128) -#define QSERDES_COM_VCO_TUNE1_MODE0 COM_OFF(0x12C) -#define QSERDES_COM_VCO_TUNE2_MODE0 COM_OFF(0x130) -#define QSERDES_COM_VCO_TUNE1_MODE1 COM_OFF(0x134) -#define QSERDES_COM_VCO_TUNE2_MODE1 COM_OFF(0x138) -#define QSERDES_COM_VCO_TUNE_TIMER1 COM_OFF(0x144) -#define QSERDES_COM_VCO_TUNE_TIMER2 COM_OFF(0x148) -#define QSERDES_COM_CLK_SELECT COM_OFF(0x174) -#define QSERDES_COM_HSCLK_SEL COM_OFF(0x178) -#define QSERDES_COM_CORECLK_DIV COM_OFF(0x184) -#define QSERDES_COM_CORE_CLK_EN COM_OFF(0x18C) -#define QSERDES_COM_CMN_CONFIG COM_OFF(0x194) -#define QSERDES_COM_SVS_MODE_CLK_SEL COM_OFF(0x19C) -#define QSERDES_COM_CORECLK_DIV_MODE1 COM_OFF(0x1BC) - -/* UFS PHY registers */ -#define UFS_PHY_PHY_START PHY_OFF(0x00) -#define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x04) -#define UFS_PHY_PCS_READY_STATUS PHY_OFF(0x168) - -/* UFS PHY TX registers */ -#define QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN TX_OFF(0, 0x68) -#define QSERDES_TX_LANE_MODE TX_OFF(0, 0x94) - -/* UFS PHY RX registers */ -#define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN RX_OFF(0, 0x40) -#define QSERDES_RX_RX_TERM_BW RX_OFF(0, 0x90) -#define QSERDES_RX_RX_EQ_GAIN1_LSB RX_OFF(0, 0xC4) -#define QSERDES_RX_RX_EQ_GAIN1_MSB RX_OFF(0, 0xC8) -#define QSERDES_RX_RX_EQ_GAIN2_LSB RX_OFF(0, 0xCC) -#define QSERDES_RX_RX_EQ_GAIN2_MSB RX_OFF(0, 0xD0) -#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2 RX_OFF(0, 0xD8) -#define QSERDES_RX_SIGDET_CNTRL RX_OFF(0, 0x114) -#define QSERDES_RX_SIGDET_LVL RX_OFF(0, 0x118) -#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL RX_OFF(0, 0x11C) -#define QSERDES_RX_RX_INTERFACE_MODE RX_OFF(0, 0x12C) - -/* - * This structure represents the 14nm specific phy. - * common_cfg MUST remain the first field in this structure - * in case extra fields are added. This way, when calling - * get_ufs_qcom_phy() of generic phy, we can extract the - * common phy structure (struct ufs_qcom_phy) out of it - * regardless of the relevant specific phy. - */ -struct ufs_qcom_phy_qmp_14nm { - struct ufs_qcom_phy common_cfg; -}; - -static struct ufs_qcom_phy_calibration phy_cal_table_rate_A[] = { - UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CMN_CONFIG, 0x0e), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL, 0xd7), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CLK_SELECT, 0x30), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYS_CLK_CTRL, 0x06), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BG_TIMER, 0x0a), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_HSCLK_SEL, 0x05), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV, 0x0a), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_EN, 0x01), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_CTRL, 0x10), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x20), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORE_CLK_EN, 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_CFG, 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER1, 0xff), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x14), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE0, 0x82), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE0, 0x0b), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE0, 0x16), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE0, 0x28), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE0, 0x28), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE0, 0x02), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE0, 0xff), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE0, 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE1, 0x98), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE1, 0x0b), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE1, 0x16), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE1, 0x28), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE1, 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE1, 0x32), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE1, 0x00), - - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN, 0x45), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE, 0x02), - - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_LVL, 0x24), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL, 0x02), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_INTERFACE_MODE, 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_TERM_BW, 0x5B), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xFF), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3F), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xFF), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0F), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E), -}; - -static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = { - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x54), -}; - -#endif |