diff options
Diffstat (limited to 'drivers/phy/phy-omap-control.c')
| -rw-r--r-- | drivers/phy/phy-omap-control.c | 320 |
1 files changed, 320 insertions, 0 deletions
diff --git a/drivers/phy/phy-omap-control.c b/drivers/phy/phy-omap-control.c new file mode 100644 index 000000000000..311b4f9a5132 --- /dev/null +++ b/drivers/phy/phy-omap-control.c @@ -0,0 +1,320 @@ +/* + * omap-control-phy.c - The PHY part of control module. + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Author: Kishon Vijay Abraham I <kishon@ti.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/phy/omap_control_phy.h> + +/** + * omap_control_phy_power - power on/off the phy using control module reg + * @dev: the control module device + * @on: 0 or 1, based on powering on or off the PHY + */ +void omap_control_phy_power(struct device *dev, int on) +{ + u32 val; + unsigned long rate; + struct omap_control_phy *control_phy; + + if (IS_ERR(dev) || !dev) { + pr_err("%s: invalid device\n", __func__); + return; + } + + control_phy = dev_get_drvdata(dev); + if (!control_phy) { + dev_err(dev, "%s: invalid control phy device\n", __func__); + return; + } + + if (control_phy->type == OMAP_CTRL_TYPE_OTGHS) + return; + + val = readl(control_phy->power); + + switch (control_phy->type) { + case OMAP_CTRL_TYPE_USB2: + if (on) + val &= ~OMAP_CTRL_DEV_PHY_PD; + else + val |= OMAP_CTRL_DEV_PHY_PD; + break; + + case OMAP_CTRL_TYPE_PIPE3: + rate = clk_get_rate(control_phy->sys_clk); + rate = rate/1000000; + + if (on) { + val &= ~(OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK | + OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK); + val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON << + OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT; + val |= rate << + OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT; + } else { + val &= ~OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK; + val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF << + OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT; + } + break; + + case OMAP_CTRL_TYPE_DRA7USB2: + if (on) + val &= ~OMAP_CTRL_USB2_PHY_PD; + else + val |= OMAP_CTRL_USB2_PHY_PD; + break; + + case OMAP_CTRL_TYPE_AM437USB2: + if (on) { + val &= ~(AM437X_CTRL_USB2_PHY_PD | + AM437X_CTRL_USB2_OTG_PD); + val |= (AM437X_CTRL_USB2_OTGVDET_EN | + AM437X_CTRL_USB2_OTGSESSEND_EN); + } else { + val &= ~(AM437X_CTRL_USB2_OTGVDET_EN | + AM437X_CTRL_USB2_OTGSESSEND_EN); + val |= (AM437X_CTRL_USB2_PHY_PD | + AM437X_CTRL_USB2_OTG_PD); + } + break; + default: + dev_err(dev, "%s: type %d not recognized\n", + __func__, control_phy->type); + break; + } + + writel(val, control_phy->power); +} +EXPORT_SYMBOL_GPL(omap_control_phy_power); + +/** + * omap_control_usb_host_mode - set AVALID, VBUSVALID and ID pin in grounded + * @ctrl_phy: struct omap_control_phy * + * + * Writes to the mailbox register to notify the usb core that a usb + * device has been connected. + */ +static void omap_control_usb_host_mode(struct omap_control_phy *ctrl_phy) +{ + u32 val; + + val = readl(ctrl_phy->otghs_control); + val &= ~(OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND); + val |= OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID; + writel(val, ctrl_phy->otghs_control); +} + +/** + * omap_control_usb_device_mode - set AVALID, VBUSVALID and ID pin in high + * impedance + * @ctrl_phy: struct omap_control_phy * + * + * Writes to the mailbox register to notify the usb core that it has been + * connected to a usb host. + */ +static void omap_control_usb_device_mode(struct omap_control_phy *ctrl_phy) +{ + u32 val; + + val = readl(ctrl_phy->otghs_control); + val &= ~OMAP_CTRL_DEV_SESSEND; + val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_AVALID | + OMAP_CTRL_DEV_VBUSVALID; + writel(val, ctrl_phy->otghs_control); +} + +/** + * omap_control_usb_set_sessionend - Enable SESSIONEND and IDIG to high + * impedance + * @ctrl_phy: struct omap_control_phy * + * + * Writes to the mailbox register to notify the usb core it's now in + * disconnected state. + */ +static void omap_control_usb_set_sessionend(struct omap_control_phy *ctrl_phy) +{ + u32 val; + + val = readl(ctrl_phy->otghs_control); + val &= ~(OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID); + val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND; + writel(val, ctrl_phy->otghs_control); +} + +/** + * omap_control_usb_set_mode - Calls to functions to set USB in one of host mode + * or device mode or to denote disconnected state + * @dev: the control module device + * @mode: The mode to which usb should be configured + * + * This is an API to write to the mailbox register to notify the usb core that + * a usb device has been connected. + */ +void omap_control_usb_set_mode(struct device *dev, + enum omap_control_usb_mode mode) +{ + struct omap_control_phy *ctrl_phy; + + if (IS_ERR(dev) || !dev) + return; + + ctrl_phy = dev_get_drvdata(dev); + + if (!ctrl_phy) { + dev_err(dev, "Invalid control phy device\n"); + return; + } + + if (ctrl_phy->type != OMAP_CTRL_TYPE_OTGHS) + return; + + switch (mode) { + case USB_MODE_HOST: + omap_control_usb_host_mode(ctrl_phy); + break; + case USB_MODE_DEVICE: + omap_control_usb_device_mode(ctrl_phy); + break; + case USB_MODE_DISCONNECT: + omap_control_usb_set_sessionend(ctrl_phy); + break; + default: + dev_vdbg(dev, "invalid omap control usb mode\n"); + } +} +EXPORT_SYMBOL_GPL(omap_control_usb_set_mode); + +#ifdef CONFIG_OF + +static const enum omap_control_phy_type otghs_data = OMAP_CTRL_TYPE_OTGHS; +static const enum omap_control_phy_type usb2_data = OMAP_CTRL_TYPE_USB2; +static const enum omap_control_phy_type pipe3_data = OMAP_CTRL_TYPE_PIPE3; +static const enum omap_control_phy_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2; +static const enum omap_control_phy_type am437usb2_data = OMAP_CTRL_TYPE_AM437USB2; + +static const struct of_device_id omap_control_phy_id_table[] = { + { + .compatible = "ti,control-phy-otghs", + .data = &otghs_data, + }, + { + .compatible = "ti,control-phy-usb2", + .data = &usb2_data, + }, + { + .compatible = "ti,control-phy-pipe3", + .data = &pipe3_data, + }, + { + .compatible = "ti,control-phy-usb2-dra7", + .data = &dra7usb2_data, + }, + { + .compatible = "ti,control-phy-usb2-am437", + .data = &am437usb2_data, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, omap_control_phy_id_table); +#endif + + +static int omap_control_phy_probe(struct platform_device *pdev) +{ + struct resource *res; + const struct of_device_id *of_id; + struct omap_control_phy *control_phy; + + of_id = of_match_device(of_match_ptr(omap_control_phy_id_table), + &pdev->dev); + if (!of_id) + return -EINVAL; + + control_phy = devm_kzalloc(&pdev->dev, sizeof(*control_phy), + GFP_KERNEL); + if (!control_phy) { + dev_err(&pdev->dev, "unable to alloc memory for control phy\n"); + return -ENOMEM; + } + + control_phy->dev = &pdev->dev; + control_phy->type = *(enum omap_control_phy_type *)of_id->data; + + if (control_phy->type == OMAP_CTRL_TYPE_OTGHS) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "otghs_control"); + control_phy->otghs_control = devm_ioremap_resource( + &pdev->dev, res); + if (IS_ERR(control_phy->otghs_control)) + return PTR_ERR(control_phy->otghs_control); + } else { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "power"); + control_phy->power = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(control_phy->power)) { + dev_err(&pdev->dev, "Couldn't get power register\n"); + return PTR_ERR(control_phy->power); + } + } + + if (control_phy->type == OMAP_CTRL_TYPE_PIPE3) { + control_phy->sys_clk = devm_clk_get(control_phy->dev, + "sys_clkin"); + if (IS_ERR(control_phy->sys_clk)) { + pr_err("%s: unable to get sys_clkin\n", __func__); + return -EINVAL; + } + } + + dev_set_drvdata(control_phy->dev, control_phy); + + return 0; +} + +static struct platform_driver omap_control_phy_driver = { + .probe = omap_control_phy_probe, + .driver = { + .name = "omap-control-phy", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(omap_control_phy_id_table), + }, +}; + +static int __init omap_control_phy_init(void) +{ + return platform_driver_register(&omap_control_phy_driver); +} +subsys_initcall(omap_control_phy_init); + +static void __exit omap_control_phy_exit(void) +{ + platform_driver_unregister(&omap_control_phy_driver); +} +module_exit(omap_control_phy_exit); + +MODULE_ALIAS("platform: omap_control_phy"); +MODULE_AUTHOR("Texas Instruments Inc."); +MODULE_DESCRIPTION("OMAP Control Module PHY Driver"); +MODULE_LICENSE("GPL v2"); |