diff options
Diffstat (limited to 'drivers/nvmem/Kconfig')
| -rw-r--r-- | drivers/nvmem/Kconfig | 300 |
1 files changed, 151 insertions, 149 deletions
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig index 691375c13381..7f2557934834 100644 --- a/drivers/nvmem/Kconfig +++ b/drivers/nvmem/Kconfig @@ -21,6 +21,40 @@ config NVMEM_SYSFS This interface is mostly used by userspace applications to read/write directly into nvmem. +# Devices + +config NVMEM_APPLE_EFUSES + tristate "Apple eFuse support" + depends on ARCH_APPLE || COMPILE_TEST + default ARCH_APPLE + help + Say y here to enable support for reading eFuses on Apple SoCs + such as the M1. These are e.g. used to store factory programmed + calibration data required for the PCIe or the USB-C PHY. + + This driver can also be built as a module. If so, the module will + be called nvmem-apple-efuses. + +config NVMEM_BCM_OCOTP + tristate "Broadcom On-Chip OTP Controller support" + depends on ARCH_BCM_IPROC || COMPILE_TEST + depends on HAS_IOMEM + default ARCH_BCM_IPROC + help + Say y here to enable read/write access to the Broadcom OTP + controller. + + This driver can also be built as a module. If so, the module + will be called nvmem-bcm-ocotp. + +config NVMEM_BRCM_NVRAM + tristate "Broadcom's NVRAM support" + depends on ARCH_BCM_5301X || COMPILE_TEST + depends on HAS_IOMEM + help + This driver provides support for Broadcom's NVRAM that can be accessed + using I/O mapping. + config NVMEM_IMX_IIM tristate "i.MX IC Identification Module support" depends on ARCH_MXC || COMPILE_TEST @@ -64,6 +98,19 @@ config NVMEM_JZ4780_EFUSE To compile this driver as a module, choose M here: the module will be called nvmem_jz4780_efuse. +config NVMEM_LAYERSCAPE_SFP + tristate "Layerscape SFP (Security Fuse Processor) support" + depends on ARCH_LAYERSCAPE || COMPILE_TEST + depends on HAS_IOMEM + select REGMAP_MMIO + help + This driver provides support to read the eFuses on Freescale + Layerscape SoC's. For example, the vendor provides a per part + unique ID there. + + This driver can also be built as a module. If so, the module + will be called layerscape-sfp. + config NVMEM_LPC18XX_EEPROM tristate "NXP LPC18XX EEPROM Memory Support" depends on ARCH_LPC18XX || COMPILE_TEST @@ -84,17 +131,32 @@ config NVMEM_LPC18XX_OTP To compile this driver as a module, choose M here: the module will be called nvmem_lpc18xx_otp. -config NVMEM_MXS_OCOTP - tristate "Freescale MXS On-Chip OTP Memory Support" - depends on ARCH_MXS || COMPILE_TEST - depends on HAS_IOMEM +config NVMEM_MESON_EFUSE + tristate "Amlogic Meson GX eFuse Support" + depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM help - If you say Y here, you will get readonly access to the - One Time Programmable memory pages that are stored - on the Freescale i.MX23/i.MX28 processor. + This is a driver to retrieve specific values from the eFuse found on + the Amlogic Meson GX SoCs. This driver can also be built as a module. If so, the module - will be called nvmem-mxs-ocotp. + will be called nvmem_meson_efuse. + +config NVMEM_MESON_MX_EFUSE + tristate "Amlogic Meson6/Meson8/Meson8b eFuse Support" + depends on ARCH_MESON || COMPILE_TEST + help + This is a driver to retrieve specific values from the eFuse found on + the Amlogic Meson6, Meson8 and Meson8b SoCs. + + This driver can also be built as a module. If so, the module + will be called nvmem_meson_mx_efuse. + +config NVMEM_MICROCHIP_OTPC + tristate "Microchip OTPC support" + depends on ARCH_AT91 || COMPILE_TEST + help + This driver enable the OTP controller available on Microchip SAMA7G5 + SoCs. It controlls the access to the OTP memory connected to it. config NVMEM_MTK_EFUSE tristate "Mediatek SoCs EFUSE support" @@ -107,12 +169,17 @@ config NVMEM_MTK_EFUSE This driver can also be built as a module. If so, the module will be called efuse-mtk. -config NVMEM_MICROCHIP_OTPC - tristate "Microchip OTPC support" - depends on ARCH_AT91 || COMPILE_TEST +config NVMEM_MXS_OCOTP + tristate "Freescale MXS On-Chip OTP Memory Support" + depends on ARCH_MXS || COMPILE_TEST + depends on HAS_IOMEM help - This driver enable the OTP controller available on Microchip SAMA7G5 - SoCs. It controlls the access to the OTP memory connected to it. + If you say Y here, you will get readonly access to the + One Time Programmable memory pages that are stored + on the Freescale i.MX23/i.MX28 processor. + + This driver can also be built as a module. If so, the module + will be called nvmem-mxs-ocotp. config NVMEM_NINTENDO_OTP tristate "Nintendo Wii and Wii U OTP Support" @@ -137,13 +204,21 @@ config NVMEM_QCOM_QFPROM This driver can also be built as a module. If so, the module will be called nvmem_qfprom. -config NVMEM_SPMI_SDAM - tristate "SPMI SDAM Support" - depends on SPMI +config NVMEM_RAVE_SP_EEPROM + tristate "Rave SP EEPROM Support" + depends on RAVE_SP_CORE help - This driver supports the Shared Direct Access Memory Module on - Qualcomm Technologies, Inc. PMICs. It provides the clients - an interface to read/write to the SDAM module's shared memory. + Say y here to enable Rave SP EEPROM support. + +config NVMEM_RMEM + tristate "Reserved Memory Based Driver Support" + depends on HAS_IOMEM + help + This driver maps reserved memory into an nvmem device. It might be + useful to expose information left by firmware in memory. + + This driver can also be built as a module. If so, the module + will be called nvmem-rmem. config NVMEM_ROCKCHIP_EFUSE tristate "Rockchip eFuse Support" @@ -167,79 +242,16 @@ config NVMEM_ROCKCHIP_OTP This driver can also be built as a module. If so, the module will be called nvmem_rockchip_otp. -config NVMEM_BCM_OCOTP - tristate "Broadcom On-Chip OTP Controller support" - depends on ARCH_BCM_IPROC || COMPILE_TEST - depends on HAS_IOMEM - default ARCH_BCM_IPROC - help - Say y here to enable read/write access to the Broadcom OTP - controller. - - This driver can also be built as a module. If so, the module - will be called nvmem-bcm-ocotp. - -config NVMEM_STM32_ROMEM - tristate "STMicroelectronics STM32 factory-programmed memory support" - depends on ARCH_STM32 || COMPILE_TEST - help - Say y here to enable read-only access for STMicroelectronics STM32 - factory-programmed memory area. - - This driver can also be built as a module. If so, the module - will be called nvmem-stm32-romem. - -config NVMEM_SUNXI_SID - tristate "Allwinner SoCs SID support" - depends on ARCH_SUNXI - help - This is a driver for the 'security ID' available on various Allwinner - devices. - - This driver can also be built as a module. If so, the module - will be called nvmem_sunxi_sid. - -config NVMEM_UNIPHIER_EFUSE - tristate "UniPhier SoCs eFuse support" - depends on ARCH_UNIPHIER || COMPILE_TEST - depends on HAS_IOMEM - help - This is a simple driver to dump specified values of UniPhier SoC - from eFuse. - - This driver can also be built as a module. If so, the module - will be called nvmem-uniphier-efuse. - -config NVMEM_VF610_OCOTP - tristate "VF610 SoC OCOTP support" - depends on SOC_VF610 || COMPILE_TEST +config NVMEM_SC27XX_EFUSE + tristate "Spreadtrum SC27XX eFuse Support" + depends on MFD_SC27XX_PMIC || COMPILE_TEST depends on HAS_IOMEM help - This is a driver for the 'OCOTP' peripheral available on Vybrid - devices like VF5xx and VF6xx. - - This driver can also be build as a module. If so, the module will - be called nvmem-vf610-ocotp. - -config NVMEM_MESON_EFUSE - tristate "Amlogic Meson GX eFuse Support" - depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM - help - This is a driver to retrieve specific values from the eFuse found on - the Amlogic Meson GX SoCs. - - This driver can also be built as a module. If so, the module - will be called nvmem_meson_efuse. - -config NVMEM_MESON_MX_EFUSE - tristate "Amlogic Meson6/Meson8/Meson8b eFuse Support" - depends on ARCH_MESON || COMPILE_TEST - help - This is a driver to retrieve specific values from the eFuse found on - the Amlogic Meson6, Meson8 and Meson8b SoCs. + This is a simple driver to dump specified values of Spreadtrum + SC27XX PMICs from eFuse. This driver can also be built as a module. If so, the module - will be called nvmem_meson_mx_efuse. + will be called nvmem-sc27xx-efuse. config NVMEM_SNVS_LPGPR tristate "Support for Low Power General Purpose Register" @@ -251,32 +263,13 @@ config NVMEM_SNVS_LPGPR This driver can also be built as a module. If so, the module will be called nvmem-snvs-lpgpr. -config NVMEM_RAVE_SP_EEPROM - tristate "Rave SP EEPROM Support" - depends on RAVE_SP_CORE - help - Say y here to enable Rave SP EEPROM support. - -config NVMEM_SC27XX_EFUSE - tristate "Spreadtrum SC27XX eFuse Support" - depends on MFD_SC27XX_PMIC || COMPILE_TEST - depends on HAS_IOMEM - help - This is a simple driver to dump specified values of Spreadtrum - SC27XX PMICs from eFuse. - - This driver can also be built as a module. If so, the module - will be called nvmem-sc27xx-efuse. - -config NVMEM_ZYNQMP - bool "Xilinx ZYNQMP SoC nvmem firmware support" - depends on ARCH_ZYNQMP +config NVMEM_SPMI_SDAM + tristate "SPMI SDAM Support" + depends on SPMI help - This is a driver to access hardware related data like - soc revision, IDCODE... etc by using the firmware - interface. - - If sure, say yes. If unsure, say no. + This driver supports the Shared Direct Access Memory Module on + Qualcomm Technologies, Inc. PMICs. It provides the clients + an interface to read/write to the SDAM module's shared memory. config NVMEM_SPRD_EFUSE tristate "Spreadtrum SoC eFuse Support" @@ -289,36 +282,15 @@ config NVMEM_SPRD_EFUSE This driver can also be built as a module. If so, the module will be called nvmem-sprd-efuse. -config NVMEM_RMEM - tristate "Reserved Memory Based Driver Support" - depends on HAS_IOMEM - help - This driver maps reserved memory into an nvmem device. It might be - useful to expose information left by firmware in memory. - - This driver can also be built as a module. If so, the module - will be called nvmem-rmem. - -config NVMEM_BRCM_NVRAM - tristate "Broadcom's NVRAM support" - depends on ARCH_BCM_5301X || COMPILE_TEST - depends on HAS_IOMEM - help - This driver provides support for Broadcom's NVRAM that can be accessed - using I/O mapping. - -config NVMEM_LAYERSCAPE_SFP - tristate "Layerscape SFP (Security Fuse Processor) support" - depends on ARCH_LAYERSCAPE || COMPILE_TEST - depends on HAS_IOMEM - select REGMAP_MMIO +config NVMEM_STM32_ROMEM + tristate "STMicroelectronics STM32 factory-programmed memory support" + depends on ARCH_STM32 || COMPILE_TEST help - This driver provides support to read the eFuses on Freescale - Layerscape SoC's. For example, the vendor provides a per part - unique ID there. + Say y here to enable read-only access for STMicroelectronics STM32 + factory-programmed memory area. This driver can also be built as a module. If so, the module - will be called layerscape-sfp. + will be called nvmem-stm32-romem. config NVMEM_SUNPLUS_OCOTP tristate "Sunplus SoC OTP support" @@ -332,17 +304,15 @@ config NVMEM_SUNPLUS_OCOTP This driver can also be built as a module. If so, the module will be called nvmem-sunplus-ocotp. -config NVMEM_APPLE_EFUSES - tristate "Apple eFuse support" - depends on ARCH_APPLE || COMPILE_TEST - default ARCH_APPLE +config NVMEM_SUNXI_SID + tristate "Allwinner SoCs SID support" + depends on ARCH_SUNXI help - Say y here to enable support for reading eFuses on Apple SoCs - such as the M1. These are e.g. used to store factory programmed - calibration data required for the PCIe or the USB-C PHY. + This is a driver for the 'security ID' available on various Allwinner + devices. - This driver can also be built as a module. If so, the module will - be called nvmem-apple-efuses. + This driver can also be built as a module. If so, the module + will be called nvmem_sunxi_sid. config NVMEM_U_BOOT_ENV tristate "U-Boot environment variables support" @@ -357,4 +327,36 @@ config NVMEM_U_BOOT_ENV If compiled as module it will be called nvmem_u-boot-env. +config NVMEM_UNIPHIER_EFUSE + tristate "UniPhier SoCs eFuse support" + depends on ARCH_UNIPHIER || COMPILE_TEST + depends on HAS_IOMEM + help + This is a simple driver to dump specified values of UniPhier SoC + from eFuse. + + This driver can also be built as a module. If so, the module + will be called nvmem-uniphier-efuse. + +config NVMEM_VF610_OCOTP + tristate "VF610 SoC OCOTP support" + depends on SOC_VF610 || COMPILE_TEST + depends on HAS_IOMEM + help + This is a driver for the 'OCOTP' peripheral available on Vybrid + devices like VF5xx and VF6xx. + + This driver can also be build as a module. If so, the module will + be called nvmem-vf610-ocotp. + +config NVMEM_ZYNQMP + bool "Xilinx ZYNQMP SoC nvmem firmware support" + depends on ARCH_ZYNQMP + help + This is a driver to access hardware related data like + soc revision, IDCODE... etc by using the firmware + interface. + + If sure, say yes. If unsure, say no. + endif |