diff options
Diffstat (limited to 'drivers/nfc/pn533/pn533.h')
| -rw-r--r-- | drivers/nfc/pn533/pn533.h | 40 |
1 files changed, 31 insertions, 9 deletions
diff --git a/drivers/nfc/pn533/pn533.h b/drivers/nfc/pn533/pn533.h index 8bf9d6ece0f5..5f94f38a2a08 100644 --- a/drivers/nfc/pn533/pn533.h +++ b/drivers/nfc/pn533/pn533.h @@ -6,10 +6,11 @@ * Copyright (C) 2012-2013 Tieto Poland */ -#define PN533_DEVICE_STD 0x1 -#define PN533_DEVICE_PASORI 0x2 -#define PN533_DEVICE_ACR122U 0x3 -#define PN533_DEVICE_PN532 0x4 +#define PN533_DEVICE_STD 0x1 +#define PN533_DEVICE_PASORI 0x2 +#define PN533_DEVICE_ACR122U 0x3 +#define PN533_DEVICE_PN532 0x4 +#define PN533_DEVICE_PN532_AUTOPOLL 0x5 #define PN533_ALL_PROTOCOLS (NFC_PROTO_JEWEL_MASK | NFC_PROTO_MIFARE_MASK |\ NFC_PROTO_FELICA_MASK | NFC_PROTO_ISO14443_MASK |\ @@ -43,6 +44,11 @@ /* Preamble (1), SoPC (2), ACK Code (2), Postamble (1) */ #define PN533_STD_FRAME_ACK_SIZE 6 +/* + * Preamble (1), SoPC (2), Packet Length (1), Packet Length Checksum (1), + * Specific Application Level Error Code (1) , Postamble (1) + */ +#define PN533_STD_ERROR_FRAME_SIZE 8 #define PN533_STD_FRAME_CHECKSUM(f) (f->data[f->datalen]) #define PN533_STD_FRAME_POSTAMBLE(f) (f->data[f->datalen + 1]) /* Half start code (3), LEN (4) should be 0xffff for extended frame */ @@ -70,6 +76,7 @@ #define PN533_CMD_IN_ATR 0x50 #define PN533_CMD_IN_RELEASE 0x52 #define PN533_CMD_IN_JUMP_FOR_DEP 0x56 +#define PN533_CMD_IN_AUTOPOLL 0x60 #define PN533_CMD_TG_INIT_AS_TARGET 0x8c #define PN533_CMD_TG_GET_DATA 0x86 @@ -84,6 +91,9 @@ #define PN533_CMD_MI_MASK 0x40 #define PN533_CMD_RET_SUCCESS 0x00 +#define PN533_FRAME_DATALEN_ACK 0x00 +#define PN533_FRAME_DATALEN_ERROR 0x01 +#define PN533_FRAME_DATALEN_EXTENDED 0xFF enum pn533_protocol_type { PN533_PROTO_REQ_ACK_RESP = 0, @@ -207,21 +217,33 @@ struct pn533_phy_ops { struct sk_buff *out); int (*send_ack)(struct pn533 *dev, gfp_t flags); void (*abort_cmd)(struct pn533 *priv, gfp_t flags); + /* + * dev_up and dev_down are optional. + * They are used to inform the phy layer that the nfc chip + * is going to be really used very soon. The phy layer can then + * bring up it's interface to the chip and have it suspended for power + * saving reasons otherwise. + */ + int (*dev_up)(struct pn533 *priv); + int (*dev_down)(struct pn533 *priv); }; -struct pn533 *pn533_register_device(u32 device_type, - u32 protocols, +struct pn533 *pn53x_common_init(u32 device_type, enum pn533_protocol_type protocol_type, void *phy, struct pn533_phy_ops *phy_ops, struct pn533_frame_ops *fops, - struct device *dev, - struct device *parent); + struct device *dev); int pn533_finalize_setup(struct pn533 *dev); -void pn533_unregister_device(struct pn533 *priv); +void pn53x_common_clean(struct pn533 *priv); void pn533_recv_frame(struct pn533 *dev, struct sk_buff *skb, int status); +int pn532_i2c_nfc_alloc(struct pn533 *priv, u32 protocols, + struct device *parent); +int pn53x_register_nfc(struct pn533 *priv, u32 protocols, + struct device *parent); +void pn53x_unregister_nfc(struct pn533 *priv); bool pn533_rx_frame_is_cmd_response(struct pn533 *dev, void *frame); bool pn533_rx_frame_is_ack(void *_frame); |