diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2x00mac.c')
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00mac.c | 309 |
1 files changed, 221 insertions, 88 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index e3f15e518c76..c206b5092070 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -30,10 +30,11 @@ #include "rt2x00lib.h" static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, - struct data_ring *ring, + struct data_queue *queue, struct sk_buff *frag_skb, struct ieee80211_tx_control *control) { + struct skb_frame_desc *skbdesc; struct sk_buff *skb; int size; @@ -52,15 +53,22 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, skb_put(skb, size); if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT) - ieee80211_ctstoself_get(rt2x00dev->hw, rt2x00dev->interface.id, + ieee80211_ctstoself_get(rt2x00dev->hw, control->vif, frag_skb->data, frag_skb->len, control, (struct ieee80211_cts *)(skb->data)); else - ieee80211_rts_get(rt2x00dev->hw, rt2x00dev->interface.id, + ieee80211_rts_get(rt2x00dev->hw, control->vif, frag_skb->data, frag_skb->len, control, (struct ieee80211_rts *)(skb->data)); - if (rt2x00dev->ops->lib->write_tx_data(rt2x00dev, ring, skb, control)) { + /* + * Initialize skb descriptor + */ + skbdesc = get_skb_frame_desc(skb); + memset(skbdesc, 0, sizeof(*skbdesc)); + skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED; + + if (rt2x00dev->ops->lib->write_tx_data(rt2x00dev, queue, skb, control)) { WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n"); return NETDEV_TX_BUSY; } @@ -73,7 +81,8 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb, { struct rt2x00_dev *rt2x00dev = hw->priv; struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data; - struct data_ring *ring; + struct data_queue *queue; + struct skb_frame_desc *skbdesc; u16 frame_control; /* @@ -88,10 +97,14 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb, } /* - * Determine which ring to put packet on. + * Determine which queue to put packet on. */ - ring = rt2x00lib_get_ring(rt2x00dev, control->queue); - if (unlikely(!ring)) { + if (control->flags & IEEE80211_TXCTL_SEND_AFTER_DTIM && + test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags)) + queue = rt2x00queue_get_queue(rt2x00dev, RT2X00_BCN_QUEUE_ATIM); + else + queue = rt2x00queue_get_queue(rt2x00dev, control->queue); + if (unlikely(!queue)) { ERROR(rt2x00dev, "Attempt to send packet over invalid queue %d.\n" "Please file bug report to %s.\n", @@ -110,23 +123,29 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb, if (!is_rts_frame(frame_control) && !is_cts_frame(frame_control) && (control->flags & (IEEE80211_TXCTL_USE_RTS_CTS | IEEE80211_TXCTL_USE_CTS_PROTECT))) { - if (rt2x00_ring_free(ring) <= 1) { + if (rt2x00queue_available(queue) <= 1) { ieee80211_stop_queue(rt2x00dev->hw, control->queue); return NETDEV_TX_BUSY; } - if (rt2x00mac_tx_rts_cts(rt2x00dev, ring, skb, control)) { + if (rt2x00mac_tx_rts_cts(rt2x00dev, queue, skb, control)) { ieee80211_stop_queue(rt2x00dev->hw, control->queue); return NETDEV_TX_BUSY; } } - if (rt2x00dev->ops->lib->write_tx_data(rt2x00dev, ring, skb, control)) { + /* + * Initialize skb descriptor + */ + skbdesc = get_skb_frame_desc(skb); + memset(skbdesc, 0, sizeof(*skbdesc)); + + if (rt2x00dev->ops->lib->write_tx_data(rt2x00dev, queue, skb, control)) { ieee80211_stop_queue(rt2x00dev->hw, control->queue); return NETDEV_TX_BUSY; } - if (rt2x00_ring_full(ring)) + if (rt2x00queue_full(queue)) ieee80211_stop_queue(rt2x00dev->hw, control->queue); if (rt2x00dev->ops->lib->kick_tx_queue) @@ -162,27 +181,67 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf) { struct rt2x00_dev *rt2x00dev = hw->priv; - struct interface *intf = &rt2x00dev->interface; - - /* FIXME: Beaconing is broken in rt2x00. */ - if (conf->type == IEEE80211_IF_TYPE_IBSS || - conf->type == IEEE80211_IF_TYPE_AP) { - ERROR(rt2x00dev, - "rt2x00 does not support Adhoc or Master mode"); - return -EOPNOTSUPP; - } + struct rt2x00_intf *intf = vif_to_intf(conf->vif); + struct data_queue *queue = + rt2x00queue_get_queue(rt2x00dev, RT2X00_BCN_QUEUE_BEACON); + struct queue_entry *entry = NULL; + unsigned int i; /* - * Don't allow interfaces to be added while - * either the device has disappeared or when - * another interface is already present. + * Don't allow interfaces to be added + * the device has disappeared. */ if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) || - is_interface_present(intf)) + !test_bit(DEVICE_STARTED, &rt2x00dev->flags)) + return -ENODEV; + + /* + * When we don't support mixed interfaces (a combination + * of sta and ap virtual interfaces) then we can only + * add this interface when the rival interface count is 0. + */ + if (!test_bit(DRIVER_SUPPORT_MIXED_INTERFACES, &rt2x00dev->flags) && + ((conf->type == IEEE80211_IF_TYPE_AP && rt2x00dev->intf_sta_count) || + (conf->type != IEEE80211_IF_TYPE_AP && rt2x00dev->intf_ap_count))) + return -ENOBUFS; + + /* + * Check if we exceeded the maximum amount of supported interfaces. + */ + if ((conf->type == IEEE80211_IF_TYPE_AP && + rt2x00dev->intf_ap_count >= rt2x00dev->ops->max_ap_intf) || + (conf->type != IEEE80211_IF_TYPE_AP && + rt2x00dev->intf_sta_count >= rt2x00dev->ops->max_sta_intf)) return -ENOBUFS; - intf->id = conf->vif; - intf->type = conf->type; + /* + * Loop through all beacon queues to find a free + * entry. Since there are as much beacon entries + * as the maximum interfaces, this search shouldn't + * fail. + */ + for (i = 0; i < queue->limit; i++) { + entry = &queue->entries[i]; + if (!__test_and_set_bit(ENTRY_BCN_ASSIGNED, &entry->flags)) + break; + } + + if (unlikely(i == queue->limit)) + return -ENOBUFS; + + /* + * We are now absolutely sure the interface can be created, + * increase interface count and start initialization. + */ + + if (conf->type == IEEE80211_IF_TYPE_AP) + rt2x00dev->intf_ap_count++; + else + rt2x00dev->intf_sta_count++; + + spin_lock_init(&intf->lock); + intf->beacon = entry; + if (conf->type == IEEE80211_IF_TYPE_AP) memcpy(&intf->bssid, conf->mac_addr, ETH_ALEN); memcpy(&intf->mac, conf->mac_addr, ETH_ALEN); @@ -192,8 +251,14 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw, * has been initialized. Otherwise the device can reset * the MAC registers. */ - rt2x00lib_config_mac_addr(rt2x00dev, intf->mac); - rt2x00lib_config_type(rt2x00dev, conf->type); + rt2x00lib_config_intf(rt2x00dev, intf, conf->type, intf->mac, NULL); + + /* + * Some filters depend on the current working mode. We can force + * an update during the next configure_filter() run by mac80211 by + * resetting the current packet_filter state. + */ + rt2x00dev->packet_filter = 0; return 0; } @@ -203,7 +268,7 @@ void rt2x00mac_remove_interface(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf) { struct rt2x00_dev *rt2x00dev = hw->priv; - struct interface *intf = &rt2x00dev->interface; + struct rt2x00_intf *intf = vif_to_intf(conf->vif); /* * Don't allow interfaces to be remove while @@ -211,21 +276,27 @@ void rt2x00mac_remove_interface(struct ieee80211_hw *hw, * no interface is present. */ if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) || - !is_interface_present(intf)) + (conf->type == IEEE80211_IF_TYPE_AP && !rt2x00dev->intf_ap_count) || + (conf->type != IEEE80211_IF_TYPE_AP && !rt2x00dev->intf_sta_count)) return; - intf->id = 0; - intf->type = IEEE80211_IF_TYPE_INVALID; - memset(&intf->bssid, 0x00, ETH_ALEN); - memset(&intf->mac, 0x00, ETH_ALEN); + if (conf->type == IEEE80211_IF_TYPE_AP) + rt2x00dev->intf_ap_count--; + else + rt2x00dev->intf_sta_count--; + + /* + * Release beacon entry so it is available for + * new interfaces again. + */ + __clear_bit(ENTRY_BCN_ASSIGNED, &intf->beacon->flags); /* * Make sure the bssid and mac address registers * are cleared to prevent false ACKing of frames. */ - rt2x00lib_config_mac_addr(rt2x00dev, intf->mac); - rt2x00lib_config_bssid(rt2x00dev, intf->bssid); - rt2x00lib_config_type(rt2x00dev, intf->type); + rt2x00lib_config_intf(rt2x00dev, intf, + IEEE80211_IF_TYPE_INVALID, NULL, NULL); } EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface); @@ -270,7 +341,7 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw, struct ieee80211_if_conf *conf) { struct rt2x00_dev *rt2x00dev = hw->priv; - struct interface *intf = &rt2x00dev->interface; + struct rt2x00_intf *intf = vif_to_intf(vif); int status; /* @@ -280,12 +351,7 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw, if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) return 0; - /* - * If the given type does not match the configured type, - * there has been a problem. - */ - if (conf->type != intf->type) - return -EINVAL; + spin_lock(&intf->lock); /* * If the interface does not work in master mode, @@ -294,7 +360,16 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw, */ if (conf->type != IEEE80211_IF_TYPE_AP) memcpy(&intf->bssid, conf->bssid, ETH_ALEN); - rt2x00lib_config_bssid(rt2x00dev, intf->bssid); + + spin_unlock(&intf->lock); + + /* + * Call rt2x00_config_intf() outside of the spinlock context since + * the call will sleep for USB drivers. By using the ieee80211_if_conf + * values as arguments we make keep access to rt2x00_intf thread safe + * even without the lock. + */ + rt2x00lib_config_intf(rt2x00dev, intf, conf->type, NULL, conf->bssid); /* * We only need to initialize the beacon when master mode is enabled. @@ -312,6 +387,50 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw, } EXPORT_SYMBOL_GPL(rt2x00mac_config_interface); +void rt2x00mac_configure_filter(struct ieee80211_hw *hw, + unsigned int changed_flags, + unsigned int *total_flags, + int mc_count, struct dev_addr_list *mc_list) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + + /* + * Mask off any flags we are going to ignore + * from the total_flags field. + */ + *total_flags &= + FIF_ALLMULTI | + FIF_FCSFAIL | + FIF_PLCPFAIL | + FIF_CONTROL | + FIF_OTHER_BSS | + FIF_PROMISC_IN_BSS; + + /* + * Apply some rules to the filters: + * - Some filters imply different filters to be set. + * - Some things we can't filter out at all. + * - Multicast filter seems to kill broadcast traffic so never use it. + */ + *total_flags |= FIF_ALLMULTI; + if (*total_flags & FIF_OTHER_BSS || + *total_flags & FIF_PROMISC_IN_BSS) + *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS; + + /* + * Check if there is any work left for us. + */ + if (rt2x00dev->packet_filter == *total_flags) + return; + rt2x00dev->packet_filter = *total_flags; + + if (!test_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags)) + rt2x00dev->ops->lib->config_filter(rt2x00dev, *total_flags); + else + queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->filter_work); +} +EXPORT_SYMBOL_GPL(rt2x00mac_configure_filter); + int rt2x00mac_get_stats(struct ieee80211_hw *hw, struct ieee80211_low_level_stats *stats) { @@ -334,9 +453,11 @@ int rt2x00mac_get_tx_stats(struct ieee80211_hw *hw, struct rt2x00_dev *rt2x00dev = hw->priv; unsigned int i; - for (i = 0; i < hw->queues; i++) - memcpy(&stats->data[i], &rt2x00dev->tx[i].stats, - sizeof(rt2x00dev->tx[i].stats)); + for (i = 0; i < hw->queues; i++) { + stats->data[i].len = rt2x00dev->tx[i].length; + stats->data[i].limit = rt2x00dev->tx[i].limit; + stats->data[i].count = rt2x00dev->tx[i].count; + } return 0; } @@ -348,71 +469,83 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw, u32 changes) { struct rt2x00_dev *rt2x00dev = hw->priv; - int short_preamble; - int ack_timeout; - int ack_consume_time; - int difs; - int preamble; + struct rt2x00_intf *intf = vif_to_intf(vif); + unsigned int delayed = 0; /* - * We only support changing preamble mode. + * When the association status has changed we must reset the link + * tuner counter. This is because some drivers determine if they + * should perform link tuning based on the number of seconds + * while associated or not associated. */ - if (!(changes & BSS_CHANGED_ERP_PREAMBLE)) - return; - - short_preamble = bss_conf->use_short_preamble; - preamble = bss_conf->use_short_preamble ? - SHORT_PREAMBLE : PREAMBLE; + if (changes & BSS_CHANGED_ASSOC) { + rt2x00dev->link.count = 0; - difs = (hw->conf.flags & IEEE80211_CONF_SHORT_SLOT_TIME) ? - SHORT_DIFS : DIFS; - ack_timeout = difs + PLCP + preamble + get_duration(ACK_SIZE, 10); + if (bss_conf->assoc) + rt2x00dev->intf_associated++; + else + rt2x00dev->intf_associated--; - ack_consume_time = SIFS + PLCP + preamble + get_duration(ACK_SIZE, 10); + if (!test_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags)) + rt2x00leds_led_assoc(rt2x00dev, + !!rt2x00dev->intf_associated); + else + delayed |= DELAYED_LED_ASSOC; + } - if (short_preamble) - __set_bit(CONFIG_SHORT_PREAMBLE, &rt2x00dev->flags); - else - __clear_bit(CONFIG_SHORT_PREAMBLE, &rt2x00dev->flags); + /* + * When the erp information has changed, we should perform + * additional configuration steps. For all other changes we are done. + */ + if (changes & BSS_CHANGED_ERP_PREAMBLE) { + if (!test_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags)) + rt2x00lib_config_erp(rt2x00dev, intf, bss_conf); + else + delayed |= DELAYED_CONFIG_ERP; + } - rt2x00dev->ops->lib->config_preamble(rt2x00dev, short_preamble, - ack_timeout, ack_consume_time); + spin_lock(&intf->lock); + memcpy(&intf->conf, bss_conf, sizeof(*bss_conf)); + if (delayed) { + intf->delayed_flags |= delayed; + queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work); + } + spin_unlock(&intf->lock); } EXPORT_SYMBOL_GPL(rt2x00mac_bss_info_changed); -int rt2x00mac_conf_tx(struct ieee80211_hw *hw, int queue, +int rt2x00mac_conf_tx(struct ieee80211_hw *hw, int queue_idx, const struct ieee80211_tx_queue_params *params) { struct rt2x00_dev *rt2x00dev = hw->priv; - struct data_ring *ring; + struct data_queue *queue; - ring = rt2x00lib_get_ring(rt2x00dev, queue); - if (unlikely(!ring)) + queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); + if (unlikely(!queue)) return -EINVAL; /* * The passed variables are stored as real value ((2^n)-1). * Ralink registers require to know the bit number 'n'. */ - if (params->cw_min) - ring->tx_params.cw_min = fls(params->cw_min); + if (params->cw_min > 0) + queue->cw_min = fls(params->cw_min); else - ring->tx_params.cw_min = 5; /* cw_min: 2^5 = 32. */ + queue->cw_min = 5; /* cw_min: 2^5 = 32. */ - if (params->cw_max) - ring->tx_params.cw_max = fls(params->cw_max); + if (params->cw_max > 0) + queue->cw_max = fls(params->cw_max); else - ring->tx_params.cw_max = 10; /* cw_min: 2^10 = 1024. */ + queue->cw_max = 10; /* cw_min: 2^10 = 1024. */ - if (params->aifs) - ring->tx_params.aifs = params->aifs; + if (params->aifs >= 0) + queue->aifs = params->aifs; else - ring->tx_params.aifs = 2; + queue->aifs = 2; INFO(rt2x00dev, - "Configured TX ring %d - CWmin: %d, CWmax: %d, Aifs: %d.\n", - queue, ring->tx_params.cw_min, ring->tx_params.cw_max, - ring->tx_params.aifs); + "Configured TX queue %d - CWmin: %d, CWmax: %d, Aifs: %d.\n", + queue_idx, queue->cw_min, queue->cw_max, queue->aifs); return 0; } |