diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2800pci.c')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2800pci.c | 1322 |
1 files changed, 1322 insertions, 0 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c new file mode 100644 index 000000000000..dfc886fcb44d --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -0,0 +1,1322 @@ +/* + Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com> + Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com> + Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org> + Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com> + Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de> + Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com> + Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com> + Copyright (C) 2009 Bart Zolnierkiewicz <bzolnier@gmail.com> + <http://rt2x00.serialmonkey.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2800pci + Abstract: rt2800pci device specific routines. + Supported chipsets: RT2800E & RT2800ED. + */ + +#include <linux/crc-ccitt.h> +#include <linux/delay.h> +#include <linux/etherdevice.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/eeprom_93cx6.h> + +#include "rt2x00.h" +#include "rt2x00pci.h" +#include "rt2x00soc.h" +#include "rt2800lib.h" +#include "rt2800.h" +#include "rt2800pci.h" + +#ifdef CONFIG_RT2800PCI_PCI_MODULE +#define CONFIG_RT2800PCI_PCI +#endif + +#ifdef CONFIG_RT2800PCI_WISOC_MODULE +#define CONFIG_RT2800PCI_WISOC +#endif + +/* + * Allow hardware encryption to be disabled. + */ +static int modparam_nohwcrypt = 1; +module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); +MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); + +static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token) +{ + unsigned int i; + u32 reg; + + for (i = 0; i < 200; i++) { + rt2800_register_read(rt2x00dev, H2M_MAILBOX_CID, ®); + + if ((rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD0) == token) || + (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD1) == token) || + (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD2) == token) || + (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD3) == token)) + break; + + udelay(REGISTER_BUSY_DELAY); + } + + if (i == 200) + ERROR(rt2x00dev, "MCU request failed, no response from hardware\n"); + + rt2800_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0); + rt2800_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); +} + +#ifdef CONFIG_RT2800PCI_WISOC +static void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev) +{ + u32 *base_addr = (u32 *) KSEG1ADDR(0x1F040000); /* XXX for RT3052 */ + + memcpy_fromio(rt2x00dev->eeprom, base_addr, EEPROM_SIZE); +} +#else +static inline void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev) +{ +} +#endif /* CONFIG_RT2800PCI_WISOC */ + +#ifdef CONFIG_RT2800PCI_PCI +static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom) +{ + struct rt2x00_dev *rt2x00dev = eeprom->data; + u32 reg; + + rt2800_register_read(rt2x00dev, E2PROM_CSR, ®); + + eeprom->reg_data_in = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_IN); + eeprom->reg_data_out = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_OUT); + eeprom->reg_data_clock = + !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_CLOCK); + eeprom->reg_chip_select = + !!rt2x00_get_field32(reg, E2PROM_CSR_CHIP_SELECT); +} + +static void rt2800pci_eepromregister_write(struct eeprom_93cx6 *eeprom) +{ + struct rt2x00_dev *rt2x00dev = eeprom->data; + u32 reg = 0; + + rt2x00_set_field32(®, E2PROM_CSR_DATA_IN, !!eeprom->reg_data_in); + rt2x00_set_field32(®, E2PROM_CSR_DATA_OUT, !!eeprom->reg_data_out); + rt2x00_set_field32(®, E2PROM_CSR_DATA_CLOCK, + !!eeprom->reg_data_clock); + rt2x00_set_field32(®, E2PROM_CSR_CHIP_SELECT, + !!eeprom->reg_chip_select); + + rt2800_register_write(rt2x00dev, E2PROM_CSR, reg); +} + +static void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev) +{ + struct eeprom_93cx6 eeprom; + u32 reg; + + rt2800_register_read(rt2x00dev, E2PROM_CSR, ®); + + eeprom.data = rt2x00dev; + eeprom.register_read = rt2800pci_eepromregister_read; + eeprom.register_write = rt2800pci_eepromregister_write; + eeprom.width = !rt2x00_get_field32(reg, E2PROM_CSR_TYPE) ? + PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66; + eeprom.reg_data_in = 0; + eeprom.reg_data_out = 0; + eeprom.reg_data_clock = 0; + eeprom.reg_chip_select = 0; + + eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom, + EEPROM_SIZE / sizeof(u16)); +} + +static int rt2800pci_efuse_detect(struct rt2x00_dev *rt2x00dev) +{ + return rt2800_efuse_detect(rt2x00dev); +} + +static inline void rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) +{ + rt2800_read_eeprom_efuse(rt2x00dev); +} +#else +static inline void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev) +{ +} + +static inline int rt2800pci_efuse_detect(struct rt2x00_dev *rt2x00dev) +{ + return 0; +} + +static inline void rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) +{ +} +#endif /* CONFIG_RT2800PCI_PCI */ + +/* + * Firmware functions + */ +static char *rt2800pci_get_firmware_name(struct rt2x00_dev *rt2x00dev) +{ + return FIRMWARE_RT2860; +} + +static int rt2800pci_check_firmware(struct rt2x00_dev *rt2x00dev, + const u8 *data, const size_t len) +{ + u16 fw_crc; + u16 crc; + + /* + * Only support 8kb firmware files. + */ + if (len != 8192) + return FW_BAD_LENGTH; + + /* + * The last 2 bytes in the firmware array are the crc checksum itself, + * this means that we should never pass those 2 bytes to the crc + * algorithm. + */ + fw_crc = (data[len - 2] << 8 | data[len - 1]); + + /* + * Use the crc ccitt algorithm. + * This will return the same value as the legacy driver which + * used bit ordering reversion on the both the firmware bytes + * before input input as well as on the final output. + * Obviously using crc ccitt directly is much more efficient. + */ + crc = crc_ccitt(~0, data, len - 2); + + /* + * There is a small difference between the crc-itu-t + bitrev and + * the crc-ccitt crc calculation. In the latter method the 2 bytes + * will be swapped, use swab16 to convert the crc to the correct + * value. + */ + crc = swab16(crc); + + return (fw_crc == crc) ? FW_OK : FW_BAD_CRC; +} + +static int rt2800pci_load_firmware(struct rt2x00_dev *rt2x00dev, + const u8 *data, const size_t len) +{ + unsigned int i; + u32 reg; + + /* + * Wait for stable hardware. + */ + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2800_register_read(rt2x00dev, MAC_CSR0, ®); + if (reg && reg != ~0) + break; + msleep(1); + } + + if (i == REGISTER_BUSY_COUNT) { + ERROR(rt2x00dev, "Unstable hardware.\n"); + return -EBUSY; + } + + rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000002); + rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0x00000000); + + /* + * Disable DMA, will be reenabled later when enabling + * the radio. + */ + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); + rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); + + /* + * enable Host program ram write selection + */ + reg = 0; + rt2x00_set_field32(®, PBF_SYS_CTRL_HOST_RAM_WRITE, 1); + rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, reg); + + /* + * Write firmware to device. + */ + rt2800_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE, + data, len); + + rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000); + rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001); + + /* + * Wait for device to stabilize. + */ + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, ®); + if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY)) + break; + msleep(1); + } + + if (i == REGISTER_BUSY_COUNT) { + ERROR(rt2x00dev, "PBF system register not ready.\n"); + return -EBUSY; + } + + /* + * Disable interrupts + */ + rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_OFF); + + /* + * Initialize BBP R/W access agent + */ + rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0); + rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); + + return 0; +} + +/* + * Initialization functions. + */ +static bool rt2800pci_get_entry_state(struct queue_entry *entry) +{ + struct queue_entry_priv_pci *entry_priv = entry->priv_data; + u32 word; + + if (entry->queue->qid == QID_RX) { + rt2x00_desc_read(entry_priv->desc, 1, &word); + + return (!rt2x00_get_field32(word, RXD_W1_DMA_DONE)); + } else { + rt2x00_desc_read(entry_priv->desc, 1, &word); + + return (!rt2x00_get_field32(word, TXD_W1_DMA_DONE)); + } +} + +static void rt2800pci_clear_entry(struct queue_entry *entry) +{ + struct queue_entry_priv_pci *entry_priv = entry->priv_data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + u32 word; + + if (entry->queue->qid == QID_RX) { + rt2x00_desc_read(entry_priv->desc, 0, &word); + rt2x00_set_field32(&word, RXD_W0_SDP0, skbdesc->skb_dma); + rt2x00_desc_write(entry_priv->desc, 0, word); + + rt2x00_desc_read(entry_priv->desc, 1, &word); + rt2x00_set_field32(&word, RXD_W1_DMA_DONE, 0); + rt2x00_desc_write(entry_priv->desc, 1, word); + } else { + rt2x00_desc_read(entry_priv->desc, 1, &word); + rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 1); + rt2x00_desc_write(entry_priv->desc, 1, word); + } +} + +static int rt2800pci_init_queues(struct rt2x00_dev *rt2x00dev) +{ + struct queue_entry_priv_pci *entry_priv; + u32 reg; + + rt2800_register_read(rt2x00dev, WPDMA_RST_IDX, ®); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, 1); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, 1); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, 1); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX3, 1); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX4, 1); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX5, 1); + rt2x00_set_field32(®, WPDMA_RST_IDX_DRX_IDX0, 1); + rt2800_register_write(rt2x00dev, WPDMA_RST_IDX, reg); + + rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f); + rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00); + + /* + * Initialize registers. + */ + entry_priv = rt2x00dev->tx[0].entries[0].priv_data; + rt2800_register_write(rt2x00dev, TX_BASE_PTR0, entry_priv->desc_dma); + rt2800_register_write(rt2x00dev, TX_MAX_CNT0, rt2x00dev->tx[0].limit); + rt2800_register_write(rt2x00dev, TX_CTX_IDX0, 0); + rt2800_register_write(rt2x00dev, TX_DTX_IDX0, 0); + + entry_priv = rt2x00dev->tx[1].entries[0].priv_data; + rt2800_register_write(rt2x00dev, TX_BASE_PTR1, entry_priv->desc_dma); + rt2800_register_write(rt2x00dev, TX_MAX_CNT1, rt2x00dev->tx[1].limit); + rt2800_register_write(rt2x00dev, TX_CTX_IDX1, 0); + rt2800_register_write(rt2x00dev, TX_DTX_IDX1, 0); + + entry_priv = rt2x00dev->tx[2].entries[0].priv_data; + rt2800_register_write(rt2x00dev, TX_BASE_PTR2, entry_priv->desc_dma); + rt2800_register_write(rt2x00dev, TX_MAX_CNT2, rt2x00dev->tx[2].limit); + rt2800_register_write(rt2x00dev, TX_CTX_IDX2, 0); + rt2800_register_write(rt2x00dev, TX_DTX_IDX2, 0); + + entry_priv = rt2x00dev->tx[3].entries[0].priv_data; + rt2800_register_write(rt2x00dev, TX_BASE_PTR3, entry_priv->desc_dma); + rt2800_register_write(rt2x00dev, TX_MAX_CNT3, rt2x00dev->tx[3].limit); + rt2800_register_write(rt2x00dev, TX_CTX_IDX3, 0); + rt2800_register_write(rt2x00dev, TX_DTX_IDX3, 0); + + entry_priv = rt2x00dev->rx->entries[0].priv_data; + rt2800_register_write(rt2x00dev, RX_BASE_PTR, entry_priv->desc_dma); + rt2800_register_write(rt2x00dev, RX_MAX_CNT, rt2x00dev->rx[0].limit); + rt2800_register_write(rt2x00dev, RX_CRX_IDX, rt2x00dev->rx[0].limit - 1); + rt2800_register_write(rt2x00dev, RX_DRX_IDX, 0); + + /* + * Enable global DMA configuration + */ + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); + rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); + + rt2800_register_write(rt2x00dev, DELAY_INT_CFG, 0); + + return 0; +} + +/* + * Device state switch handlers. + */ +static void rt2800pci_toggle_rx(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + u32 reg; + + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, + (state == STATE_RADIO_RX_ON) || + (state == STATE_RADIO_RX_ON_LINK)); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); +} + +static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + int mask = (state == STATE_RADIO_IRQ_ON); + u32 reg; + + /* + * When interrupts are being enabled, the interrupt registers + * should clear the register to assure a clean state. + */ + if (state == STATE_RADIO_IRQ_ON) { + rt2800_register_read(rt2x00dev, INT_SOURCE_CSR, ®); + rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, reg); + } + + rt2800_register_read(rt2x00dev, INT_MASK_CSR, ®); + rt2x00_set_field32(®, INT_MASK_CSR_RXDELAYINT, mask); + rt2x00_set_field32(®, INT_MASK_CSR_TXDELAYINT, mask); + rt2x00_set_field32(®, INT_MASK_CSR_RX_DONE, mask); + rt2x00_set_field32(®, INT_MASK_CSR_AC0_DMA_DONE, mask); + rt2x00_set_field32(®, INT_MASK_CSR_AC1_DMA_DONE, mask); + rt2x00_set_field32(®, INT_MASK_CSR_AC2_DMA_DONE, mask); + rt2x00_set_field32(®, INT_MASK_CSR_AC3_DMA_DONE, mask); + rt2x00_set_field32(®, INT_MASK_CSR_HCCA_DMA_DONE, mask); + rt2x00_set_field32(®, INT_MASK_CSR_MGMT_DMA_DONE, mask); + rt2x00_set_field32(®, INT_MASK_CSR_MCU_COMMAND, mask); + rt2x00_set_field32(®, INT_MASK_CSR_RXTX_COHERENT, mask); + rt2x00_set_field32(®, INT_MASK_CSR_TBTT, mask); + rt2x00_set_field32(®, INT_MASK_CSR_PRE_TBTT, mask); + rt2x00_set_field32(®, INT_MASK_CSR_TX_FIFO_STATUS, mask); + rt2x00_set_field32(®, INT_MASK_CSR_AUTO_WAKEUP, mask); + rt2x00_set_field32(®, INT_MASK_CSR_GPTIMER, mask); + rt2x00_set_field32(®, INT_MASK_CSR_RX_COHERENT, mask); + rt2x00_set_field32(®, INT_MASK_CSR_TX_COHERENT, mask); + rt2800_register_write(rt2x00dev, INT_MASK_CSR, reg); +} + +static int rt2800pci_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u32 reg; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) && + !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY)) + return 0; + + msleep(1); + } + + ERROR(rt2x00dev, "WPDMA TX/RX busy, aborting.\n"); + return -EACCES; +} + +static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + u16 word; + + /* + * Initialize all registers. + */ + if (unlikely(rt2800pci_wait_wpdma_ready(rt2x00dev) || + rt2800pci_init_queues(rt2x00dev) || + rt2800_init_registers(rt2x00dev) || + rt2800pci_wait_wpdma_ready(rt2x00dev) || + rt2800_init_bbp(rt2x00dev) || + rt2800_init_rfcsr(rt2x00dev))) + return -EIO; + + /* + * Send signal to firmware during boot time. + */ + rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0); + + /* + * Enable RX. + */ + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1); + rt2x00_set_field32(®, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 2); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); + rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); + + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + + /* + * Initialize LED control + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word); + rt2800_mcu_request(rt2x00dev, MCU_LED_1, 0xff, + word & 0xff, (word >> 8) & 0xff); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word); + rt2800_mcu_request(rt2x00dev, MCU_LED_2, 0xff, + word & 0xff, (word >> 8) & 0xff); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word); + rt2800_mcu_request(rt2x00dev, MCU_LED_3, 0xff, + word & 0xff, (word >> 8) & 0xff); + + return 0; +} + +static void rt2800pci_disable_radio(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); + rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); + + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0); + rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0); + rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0); + + rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001280); + + rt2800_register_read(rt2x00dev, WPDMA_RST_IDX, ®); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, 1); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, 1); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, 1); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX3, 1); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX4, 1); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX5, 1); + rt2x00_set_field32(®, WPDMA_RST_IDX_DRX_IDX0, 1); + rt2800_register_write(rt2x00dev, WPDMA_RST_IDX, reg); + + rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f); + rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00); + + /* Wait for DMA, ignore error */ + rt2800pci_wait_wpdma_ready(rt2x00dev); +} + +static int rt2800pci_set_state(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + /* + * Always put the device to sleep (even when we intend to wakeup!) + * if the device is booting and wasn't asleep it will return + * failure when attempting to wakeup. + */ + rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2); + + if (state == STATE_AWAKE) { + rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKUP, 0, 0); + rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKUP); + } + + return 0; +} + +static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev, + enum dev_state state) +{ + int retval = 0; + + switch (state) { + case STATE_RADIO_ON: + /* + * Before the radio can be enabled, the device first has + * to be woken up. After that it needs a bit of time + * to be fully awake and then the radio can be enabled. + */ + rt2800pci_set_state(rt2x00dev, STATE_AWAKE); + msleep(1); + retval = rt2800pci_enable_radio(rt2x00dev); + break; + case STATE_RADIO_OFF: + /* + * After the radio has been disabled, the device should + * be put to sleep for powersaving. + */ + rt2800pci_disable_radio(rt2x00dev); + rt2800pci_set_state(rt2x00dev, STATE_SLEEP); + break; + case STATE_RADIO_RX_ON: + case STATE_RADIO_RX_ON_LINK: + case STATE_RADIO_RX_OFF: + case STATE_RADIO_RX_OFF_LINK: + rt2800pci_toggle_rx(rt2x00dev, state); + break; + case STATE_RADIO_IRQ_ON: + case STATE_RADIO_IRQ_OFF: + rt2800pci_toggle_irq(rt2x00dev, state); + break; + case STATE_DEEP_SLEEP: + case STATE_SLEEP: + case STATE_STANDBY: + case STATE_AWAKE: + retval = rt2800pci_set_state(rt2x00dev, state); + break; + default: + retval = -ENOTSUPP; + break; + } + + if (unlikely(retval)) + ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n", + state, retval); + + return retval; +} + +/* + * TX descriptor initialization + */ +static void rt2800pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, + struct sk_buff *skb, + struct txentry_desc *txdesc) +{ + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); + __le32 *txd = skbdesc->desc; + __le32 *txwi = (__le32 *)(skb->data - rt2x00dev->ops->extra_tx_headroom); + u32 word; + + /* + * Initialize TX Info descriptor + */ + rt2x00_desc_read(txwi, 0, &word); + rt2x00_set_field32(&word, TXWI_W0_FRAG, + test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0); + rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0); + rt2x00_set_field32(&word, TXWI_W0_TS, + test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W0_AMPDU, + test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density); + rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->ifs); + rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs); + rt2x00_set_field32(&word, TXWI_W0_BW, + test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W0_SHORT_GI, + test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->stbc); + rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode); + rt2x00_desc_write(txwi, 0, word); + + rt2x00_desc_read(txwi, 1, &word); + rt2x00_set_field32(&word, TXWI_W1_ACK, + test_bit(ENTRY_TXD_ACK, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W1_NSEQ, + test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags)); + rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size); + rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID, + test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ? + txdesc->key_idx : 0xff); + rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT, + skb->len - txdesc->l2pad); + rt2x00_set_field32(&word, TXWI_W1_PACKETID, + skbdesc->entry->queue->qid + 1); + rt2x00_desc_write(txwi, 1, word); + + /* + * Always write 0 to IV/EIV fields, hardware will insert the IV + * from the IVEIV register when TXD_W3_WIV is set to 0. + * When TXD_W3_WIV is set to 1 it will use the IV data + * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which + * crypto entry in the registers should be used to encrypt the frame. + */ + _rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */); + _rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */); + + /* + * The buffers pointed by SD_PTR0/SD_LEN0 and SD_PTR1/SD_LEN1 + * must contains a TXWI structure + 802.11 header + padding + 802.11 + * data. We choose to have SD_PTR0/SD_LEN0 only contains TXWI and + * SD_PTR1/SD_LEN1 contains 802.11 header + padding + 802.11 + * data. It means that LAST_SEC0 is always 0. + */ + + /* + * Initialize TX descriptor + */ + rt2x00_desc_read(txd, 0, &word); + rt2x00_set_field32(&word, TXD_W0_SD_PTR0, skbdesc->skb_dma); + rt2x00_desc_write(txd, 0, word); + + rt2x00_desc_read(txd, 1, &word); + rt2x00_set_field32(&word, TXD_W1_SD_LEN1, skb->len); + rt2x00_set_field32(&word, TXD_W1_LAST_SEC1, + !test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W1_BURST, + test_bit(ENTRY_TXD_BURST, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W1_SD_LEN0, + rt2x00dev->ops->extra_tx_headroom); + rt2x00_set_field32(&word, TXD_W1_LAST_SEC0, 0); + rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 0); + rt2x00_desc_write(txd, 1, word); + + rt2x00_desc_read(txd, 2, &word); + rt2x00_set_field32(&word, TXD_W2_SD_PTR1, + skbdesc->skb_dma + rt2x00dev->ops->extra_tx_headroom); + rt2x00_desc_write(txd, 2, word); + + rt2x00_desc_read(txd, 3, &word); + rt2x00_set_field32(&word, TXD_W3_WIV, + !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W3_QSEL, 2); + rt2x00_desc_write(txd, 3, word); +} + +/* + * TX data initialization + */ +static void rt2800pci_write_beacon(struct queue_entry *entry) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + unsigned int beacon_base; + u32 reg; + + /* + * Disable beaconing while we are reloading the beacon data, + * otherwise we might be sending out invalid data. + */ + rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); + rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); + + /* + * Write entire beacon with descriptor to register. + */ + beacon_base = HW_BEACON_OFFSET(entry->entry_idx); + rt2800_register_multiwrite(rt2x00dev, + beacon_base, + skbdesc->desc, skbdesc->desc_len); + rt2800_register_multiwrite(rt2x00dev, + beacon_base + skbdesc->desc_len, + entry->skb->data, entry->skb->len); + + /* + * Clean up beacon skb. + */ + dev_kfree_skb_any(entry->skb); + entry->skb = NULL; +} + +static void rt2800pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, + const enum data_queue_qid queue_idx) +{ + struct data_queue *queue; + unsigned int idx, qidx = 0; + u32 reg; + + if (queue_idx == QID_BEACON) { + rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); + if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) { + rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); + rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); + rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1); + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); + } + return; + } + + if (queue_idx > QID_HCCA && queue_idx != QID_MGMT) + return; + + queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); + idx = queue->index[Q_INDEX]; + + if (queue_idx == QID_MGMT) + qidx = 5; + else + qidx = queue_idx; + + rt2800_register_write(rt2x00dev, TX_CTX_IDX(qidx), idx); +} + +static void rt2800pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev, + const enum data_queue_qid qid) +{ + u32 reg; + + if (qid == QID_BEACON) { + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, 0); + return; + } + + rt2800_register_read(rt2x00dev, WPDMA_RST_IDX, ®); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, (qid == QID_AC_BE)); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, (qid == QID_AC_BK)); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, (qid == QID_AC_VI)); + rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX3, (qid == QID_AC_VO)); + rt2800_register_write(rt2x00dev, WPDMA_RST_IDX, reg); +} + +/* + * RX control handlers + */ +static void rt2800pci_fill_rxdone(struct queue_entry *entry, + struct rxdone_entry_desc *rxdesc) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + struct queue_entry_priv_pci *entry_priv = entry->priv_data; + __le32 *rxd = entry_priv->desc; + __le32 *rxwi = (__le32 *)entry->skb->data; + u32 rxd3; + u32 rxwi0; + u32 rxwi1; + u32 rxwi2; + u32 rxwi3; + + rt2x00_desc_read(rxd, 3, &rxd3); + rt2x00_desc_read(rxwi, 0, &rxwi0); + rt2x00_desc_read(rxwi, 1, &rxwi1); + rt2x00_desc_read(rxwi, 2, &rxwi2); + rt2x00_desc_read(rxwi, 3, &rxwi3); + + if (rt2x00_get_field32(rxd3, RXD_W3_CRC_ERROR)) + rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; + + if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) { + /* + * Unfortunately we don't know the cipher type used during + * decryption. This prevents us from correct providing + * correct statistics through debugfs. + */ + rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF); + rxdesc->cipher_status = + rt2x00_get_field32(rxd3, RXD_W3_CIPHER_ERROR); + } + + if (rt2x00_get_field32(rxd3, RXD_W3_DECRYPTED)) { + /* + * Hardware has stripped IV/EIV data from 802.11 frame during + * decryption. Unfortunately the descriptor doesn't contain + * any fields with the EIV/IV data either, so they can't + * be restored by rt2x00lib. + */ + rxdesc->flags |= RX_FLAG_IV_STRIPPED; + + if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS) + rxdesc->flags |= RX_FLAG_DECRYPTED; + else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC) + rxdesc->flags |= RX_FLAG_MMIC_ERROR; + } + + if (rt2x00_get_field32(rxd3, RXD_W3_MY_BSS)) + rxdesc->dev_flags |= RXDONE_MY_BSS; + + if (rt2x00_get_field32(rxd3, RXD_W3_L2PAD)) { + rxdesc->dev_flags |= RXDONE_L2PAD; + skbdesc->flags |= SKBDESC_L2_PADDED; + } + + if (rt2x00_get_field32(rxwi1, RXWI_W1_SHORT_GI)) + rxdesc->flags |= RX_FLAG_SHORT_GI; + + if (rt2x00_get_field32(rxwi1, RXWI_W1_BW)) + rxdesc->flags |= RX_FLAG_40MHZ; + + /* + * Detect RX rate, always use MCS as signal type. + */ + rxdesc->dev_flags |= RXDONE_SIGNAL_MCS; + rxdesc->rate_mode = rt2x00_get_field32(rxwi1, RXWI_W1_PHYMODE); + rxdesc->signal = rt2x00_get_field32(rxwi1, RXWI_W1_MCS); + + /* + * Mask of 0x8 bit to remove the short preamble flag. + */ + if (rxdesc->rate_mode == RATE_MODE_CCK) + rxdesc->signal &= ~0x8; + + rxdesc->rssi = + (rt2x00_get_field32(rxwi2, RXWI_W2_RSSI0) + + rt2x00_get_field32(rxwi2, RXWI_W2_RSSI1)) / 2; + + rxdesc->noise = + (rt2x00_get_field32(rxwi3, RXWI_W3_SNR0) + + rt2x00_get_field32(rxwi3, RXWI_W3_SNR1)) / 2; + + rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT); + + /* + * Set RX IDX in register to inform hardware that we have handled + * this entry and it is available for reuse again. + */ + rt2800_register_write(rt2x00dev, RX_CRX_IDX, entry->entry_idx); + + /* + * Remove TXWI descriptor from start of buffer. + */ + skb_pull(entry->skb, RXWI_DESC_SIZE); + skb_trim(entry->skb, rxdesc->size); +} + +/* + * Interrupt functions. + */ +static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev) +{ + struct data_queue *queue; + struct queue_entry *entry; + struct queue_entry *entry_done; + struct queue_entry_priv_pci *entry_priv; + struct txdone_entry_desc txdesc; + u32 word; + u32 reg; + u32 old_reg; + unsigned int type; + unsigned int index; + u16 mcs, real_mcs; + + /* + * During each loop we will compare the freshly read + * TX_STA_FIFO register value with the value read from + * the previous loop. If the 2 values are equal then + * we should stop processing because the chance it + * quite big that the device has been unplugged and + * we risk going into an endless loop. + */ + old_reg = 0; + + while (1) { + rt2800_register_read(rt2x00dev, TX_STA_FIFO, ®); + if (!rt2x00_get_field32(reg, TX_STA_FIFO_VALID)) + break; + + if (old_reg == reg) + break; + old_reg = reg; + + /* + * Skip this entry when it contains an invalid + * queue identication number. + */ + type = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE) - 1; + if (type >= QID_RX) + continue; + + queue = rt2x00queue_get_queue(rt2x00dev, type); + if (unlikely(!queue)) + continue; + + /* + * Skip this entry when it contains an invalid + * index number. + */ + index = rt2x00_get_field32(reg, TX_STA_FIFO_WCID) - 1; + if (unlikely(index >= queue->limit)) + continue; + + entry = &queue->entries[index]; + entry_priv = entry->priv_data; + rt2x00_desc_read((__le32 *)entry->skb->data, 0, &word); + + entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE); + while (entry != entry_done) { + /* + * Catch up. + * Just report any entries we missed as failed. + */ + WARNING(rt2x00dev, + "TX status report missed for entry %d\n", + entry_done->entry_idx); + + txdesc.flags = 0; + __set_bit(TXDONE_UNKNOWN, &txdesc.flags); + txdesc.retry = 0; + + rt2x00lib_txdone(entry_done, &txdesc); + entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE); + } + + /* + * Obtain the status about this packet. + */ + txdesc.flags = 0; + if (rt2x00_get_field32(reg, TX_STA_FIFO_TX_SUCCESS)) + __set_bit(TXDONE_SUCCESS, &txdesc.flags); + else + __set_bit(TXDONE_FAILURE, &txdesc.flags); + + /* + * Ralink has a retry mechanism using a global fallback + * table. We setup this fallback table to try immediate + * lower rate for all rates. In the TX_STA_FIFO, + * the MCS field contains the MCS used for the successfull + * transmission. If the first transmission succeed, + * we have mcs == tx_mcs. On the second transmission, + * we have mcs = tx_mcs - 1. So the number of + * retry is (tx_mcs - mcs). + */ + mcs = rt2x00_get_field32(word, TXWI_W0_MCS); + real_mcs = rt2x00_get_field32(reg, TX_STA_FIFO_MCS); + __set_bit(TXDONE_FALLBACK, &txdesc.flags); + txdesc.retry = mcs - min(mcs, real_mcs); + + rt2x00lib_txdone(entry, &txdesc); + } +} + +static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance) +{ + struct rt2x00_dev *rt2x00dev = dev_instance; + u32 reg; + + /* Read status and ACK all interrupts */ + rt2800_register_read(rt2x00dev, INT_SOURCE_CSR, ®); + rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, reg); + + if (!reg) + return IRQ_NONE; + + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) + return IRQ_HANDLED; + + /* + * 1 - Rx ring done interrupt. + */ + if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RX_DONE)) + rt2x00pci_rxdone(rt2x00dev); + + if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS)) + rt2800pci_txdone(rt2x00dev); + + return IRQ_HANDLED; +} + +/* + * Device probe functions. + */ +static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) +{ + /* + * Read EEPROM into buffer + */ + switch (rt2x00dev->chip.rt) { + case RT2880: + case RT3052: + rt2800pci_read_eeprom_soc(rt2x00dev); + break; + default: + if (rt2800pci_efuse_detect(rt2x00dev)) + rt2800pci_read_eeprom_efuse(rt2x00dev); + else + rt2800pci_read_eeprom_pci(rt2x00dev); + break; + } + + return rt2800_validate_eeprom(rt2x00dev); +} + +static const struct rt2800_ops rt2800pci_rt2800_ops = { + .register_read = rt2x00pci_register_read, + .register_read_lock = rt2x00pci_register_read, /* same for PCI */ + .register_write = rt2x00pci_register_write, + .register_write_lock = rt2x00pci_register_write, /* same for PCI */ + + .register_multiread = rt2x00pci_register_multiread, + .register_multiwrite = rt2x00pci_register_multiwrite, + + .regbusy_read = rt2x00pci_regbusy_read, +}; + +static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev) +{ + int retval; + + rt2x00dev->priv = (void *)&rt2800pci_rt2800_ops; + + /* + * Allocate eeprom data. + */ + retval = rt2800pci_validate_eeprom(rt2x00dev); + if (retval) + return retval; + + retval = rt2800_init_eeprom(rt2x00dev); + if (retval) + return retval; + + /* + * Initialize hw specifications. + */ + retval = rt2800_probe_hw_mode(rt2x00dev); + if (retval) + return retval; + + /* + * This device has multiple filters for control frames + * and has a separate filter for PS Poll frames. + */ + __set_bit(DRIVER_SUPPORT_CONTROL_FILTERS, &rt2x00dev->flags); + __set_bit(DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL, &rt2x00dev->flags); + + /* + * This device requires firmware. + */ + if (!rt2x00_rt(&rt2x00dev->chip, RT2880) && + !rt2x00_rt(&rt2x00dev->chip, RT3052)) + __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags); + if (!modparam_nohwcrypt) + __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags); + + /* + * Set the rssi offset. + */ + rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; + + return 0; +} + +static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = { + .irq_handler = rt2800pci_interrupt, + .probe_hw = rt2800pci_probe_hw, + .get_firmware_name = rt2800pci_get_firmware_name, + .check_firmware = rt2800pci_check_firmware, + .load_firmware = rt2800pci_load_firmware, + .initialize = rt2x00pci_initialize, + .uninitialize = rt2x00pci_uninitialize, + .get_entry_state = rt2800pci_get_entry_state, + .clear_entry = rt2800pci_clear_entry, + .set_device_state = rt2800pci_set_device_state, + .rfkill_poll = rt2800_rfkill_poll, + .link_stats = rt2800_link_stats, + .reset_tuner = rt2800_reset_tuner, + .link_tuner = rt2800_link_tuner, + .write_tx_desc = rt2800pci_write_tx_desc, + .write_tx_data = rt2x00pci_write_tx_data, + .write_beacon = rt2800pci_write_beacon, + .kick_tx_queue = rt2800pci_kick_tx_queue, + .kill_tx_queue = rt2800pci_kill_tx_queue, + .fill_rxdone = rt2800pci_fill_rxdone, + .config_shared_key = rt2800_config_shared_key, + .config_pairwise_key = rt2800_config_pairwise_key, + .config_filter = rt2800_config_filter, + .config_intf = rt2800_config_intf, + .config_erp = rt2800_config_erp, + .config_ant = rt2800_config_ant, + .config = rt2800_config, +}; + +static const struct data_queue_desc rt2800pci_queue_rx = { + .entry_num = RX_ENTRIES, + .data_size = AGGREGATION_SIZE, + .desc_size = RXD_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_pci), +}; + +static const struct data_queue_desc rt2800pci_queue_tx = { + .entry_num = TX_ENTRIES, + .data_size = AGGREGATION_SIZE, + .desc_size = TXD_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_pci), +}; + +static const struct data_queue_desc rt2800pci_queue_bcn = { + .entry_num = 8 * BEACON_ENTRIES, + .data_size = 0, /* No DMA required for beacons */ + .desc_size = TXWI_DESC_SIZE, + .priv_size = sizeof(struct queue_entry_priv_pci), +}; + +static const struct rt2x00_ops rt2800pci_ops = { + .name = KBUILD_MODNAME, + .max_sta_intf = 1, + .max_ap_intf = 8, + .eeprom_size = EEPROM_SIZE, + .rf_size = RF_SIZE, + .tx_queues = NUM_TX_QUEUES, + .extra_tx_headroom = TXWI_DESC_SIZE, + .rx = &rt2800pci_queue_rx, + .tx = &rt2800pci_queue_tx, + .bcn = &rt2800pci_queue_bcn, + .lib = &rt2800pci_rt2x00_ops, + .hw = &rt2800_mac80211_ops, +#ifdef CONFIG_RT2X00_LIB_DEBUGFS + .debugfs = &rt2800_rt2x00debug, +#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ +}; + +/* + * RT2800pci module information. + */ +static struct pci_device_id rt2800pci_device_table[] = { + { PCI_DEVICE(0x1462, 0x891a), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1432, 0x7708), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1432, 0x7727), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1432, 0x7728), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1432, 0x7738), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1432, 0x7748), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1432, 0x7758), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1432, 0x7768), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x0601), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x0681), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x0701), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x0781), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x3060), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x3062), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x3090), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x3091), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x3092), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x3562), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x3592), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1a3b, 0x1059), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { 0, } +}; + +MODULE_AUTHOR(DRV_PROJECT); +MODULE_VERSION(DRV_VERSION); +MODULE_DESCRIPTION("Ralink RT2800 PCI & PCMCIA Wireless LAN driver."); +MODULE_SUPPORTED_DEVICE("Ralink RT2860 PCI & PCMCIA chipset based cards"); +#ifdef CONFIG_RT2800PCI_PCI +MODULE_FIRMWARE(FIRMWARE_RT2860); +MODULE_DEVICE_TABLE(pci, rt2800pci_device_table); +#endif /* CONFIG_RT2800PCI_PCI */ +MODULE_LICENSE("GPL"); + +#ifdef CONFIG_RT2800PCI_WISOC +#if defined(CONFIG_RALINK_RT288X) +__rt2x00soc_probe(RT2880, &rt2800pci_ops); +#elif defined(CONFIG_RALINK_RT305X) +__rt2x00soc_probe(RT3052, &rt2800pci_ops); +#endif + +static struct platform_driver rt2800soc_driver = { + .driver = { + .name = "rt2800_wmac", + .owner = THIS_MODULE, + .mod_name = KBUILD_MODNAME, + }, + .probe = __rt2x00soc_probe, + .remove = __devexit_p(rt2x00soc_remove), + .suspend = rt2x00soc_suspend, + .resume = rt2x00soc_resume, +}; +#endif /* CONFIG_RT2800PCI_WISOC */ + +#ifdef CONFIG_RT2800PCI_PCI +static struct pci_driver rt2800pci_driver = { + .name = KBUILD_MODNAME, + .id_table = rt2800pci_device_table, + .probe = rt2x00pci_probe, + .remove = __devexit_p(rt2x00pci_remove), + .suspend = rt2x00pci_suspend, + .resume = rt2x00pci_resume, +}; +#endif /* CONFIG_RT2800PCI_PCI */ + +static int __init rt2800pci_init(void) +{ + int ret = 0; + +#ifdef CONFIG_RT2800PCI_WISOC + ret = platform_driver_register(&rt2800soc_driver); + if (ret) + return ret; +#endif +#ifdef CONFIG_RT2800PCI_PCI + ret = pci_register_driver(&rt2800pci_driver); + if (ret) { +#ifdef CONFIG_RT2800PCI_WISOC + platform_driver_unregister(&rt2800soc_driver); +#endif + return ret; + } +#endif + + return ret; +} + +static void __exit rt2800pci_exit(void) +{ +#ifdef CONFIG_RT2800PCI_PCI + pci_unregister_driver(&rt2800pci_driver); +#endif +#ifdef CONFIG_RT2800PCI_WISOC + platform_driver_unregister(&rt2800soc_driver); +#endif +} + +module_init(rt2800pci_init); +module_exit(rt2800pci_exit); |