diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-shared.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-shared.h | 400 |
1 files changed, 89 insertions, 311 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-shared.h b/drivers/net/wireless/iwlwifi/iwl-shared.h index dc55cc4a8108..b515d657a0ad 100644 --- a/drivers/net/wireless/iwlwifi/iwl-shared.h +++ b/drivers/net/wireless/iwlwifi/iwl-shared.h @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2007 - 2011 Intel Corporation. All rights reserved. + * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -65,12 +65,11 @@ #include <linux/types.h> #include <linux/spinlock.h> -#include <linux/mutex.h> #include <linux/gfp.h> -#include <linux/mm.h> /* for page_address */ #include <net/mac80211.h> #include "iwl-commands.h" +#include "iwl-fw.h" /** * DOC: shared area - role and goal @@ -94,7 +93,6 @@ * This implementation is iwl-pci.c */ -struct iwl_bus; struct iwl_priv; struct iwl_trans; struct iwl_sensitivity_ranges; @@ -102,7 +100,7 @@ struct iwl_trans_ops; #define DRV_NAME "iwlwifi" #define IWLWIFI_VERSION "in-tree:" -#define DRV_COPYRIGHT "Copyright(c) 2003-2011 Intel Corporation" +#define DRV_COPYRIGHT "Copyright(c) 2003-2012 Intel Corporation" #define DRV_AUTHOR "<ilw@linux.intel.com>" extern struct iwl_mod_params iwlagn_mod_params; @@ -117,7 +115,6 @@ extern struct iwl_mod_params iwlagn_mod_params; * Holds the module parameters * * @sw_crypto: using hardware encryption, default = 0 - * @num_of_queues: number of tx queue, HW dependent * @disable_11n: disable 11n capabilities, default = 0, * use IWL_DISABLE_HT_* constants * @amsdu_size_8K: enable 8K amsdu size, default = 1 @@ -139,7 +136,6 @@ extern struct iwl_mod_params iwlagn_mod_params; */ struct iwl_mod_params { int sw_crypto; - int num_of_queues; unsigned int disable_11n; int amsdu_size_8K; int antenna; @@ -164,7 +160,6 @@ struct iwl_mod_params { * * Holds the module parameters * - * @max_txq_num: Max # Tx queues supported * @num_ampdu_queues: num of ampdu queues * @tx_chains_num: Number of TX chains * @rx_chains_num: Number of RX chains @@ -173,27 +168,23 @@ struct iwl_mod_params { * @ht40_channel: is 40MHz width possible: BIT(IEEE80211_BAND_XXX) * @sku: sku read from EEPROM * @rx_page_order: Rx buffer page order - * @max_inst_size: for ucode use - * @max_data_size: for ucode use * @ct_kill_threshold: temperature threshold - in hw dependent unit * @ct_kill_exit_threshold: when to reeable the device - in hw dependent unit * relevant for 1000, 6000 and up * @wd_timeout: TX queues watchdog timeout * @struct iwl_sensitivity_ranges: range of sensitivity values + * @use_rts_for_aggregation: use rts/cts protection for HT traffic */ struct iwl_hw_params { - u8 max_txq_num; u8 num_ampdu_queues; u8 tx_chains_num; u8 rx_chains_num; u8 valid_tx_ant; u8 valid_rx_ant; u8 ht40_channel; - bool shadow_reg_enable; + bool use_rts_for_aggregation; u16 sku; u32 rx_page_order; - u32 max_inst_size; - u32 max_data_size; u32 ct_kill_threshold; u32 ct_kill_exit_threshold; unsigned int wd_timeout; @@ -201,62 +192,6 @@ struct iwl_hw_params { const struct iwl_sensitivity_ranges *sens; }; -/** - * enum iwl_ucode_type - * - * The type of ucode currently loaded on the hardware. - * - * @IWL_UCODE_NONE: No ucode loaded - * @IWL_UCODE_REGULAR: Normal runtime ucode - * @IWL_UCODE_INIT: Initial ucode - * @IWL_UCODE_WOWLAN: Wake on Wireless enabled ucode - */ -enum iwl_ucode_type { - IWL_UCODE_NONE, - IWL_UCODE_REGULAR, - IWL_UCODE_INIT, - IWL_UCODE_WOWLAN, -}; - -/** - * struct iwl_notification_wait - notification wait entry - * @list: list head for global list - * @fn: function called with the notification - * @cmd: command ID - * - * This structure is not used directly, to wait for a - * notification declare it on the stack, and call - * iwlagn_init_notification_wait() with appropriate - * parameters. Then do whatever will cause the ucode - * to notify the driver, and to wait for that then - * call iwlagn_wait_notification(). - * - * Each notification is one-shot. If at some point we - * need to support multi-shot notifications (which - * can't be allocated on the stack) we need to modify - * the code for them. - */ -struct iwl_notification_wait { - struct list_head list; - - void (*fn)(struct iwl_trans *trans, struct iwl_rx_packet *pkt, - void *data); - void *fn_data; - - u8 cmd; - bool triggered, aborted; -}; - -/** - * enum iwl_pa_type - Power Amplifier type - * @IWL_PA_SYSTEM: based on uCode configuration - * @IWL_PA_INTERNAL: use Internal only - */ -enum iwl_pa_type { - IWL_PA_SYSTEM = 0, - IWL_PA_INTERNAL = 1, -}; - /* * LED mode * IWL_LED_DEFAULT: use device default @@ -264,11 +199,80 @@ enum iwl_pa_type { * LED ON = RF ON * LED OFF = RF OFF * IWL_LED_BLINK: adjust led blink rate based on blink table + * IWL_LED_DISABLE: led disabled */ enum iwl_led_mode { IWL_LED_DEFAULT, IWL_LED_RF_STATE, IWL_LED_BLINK, + IWL_LED_DISABLE, +}; + +/* + * @max_ll_items: max number of OTP blocks + * @shadow_ram_support: shadow support for OTP memory + * @led_compensation: compensate on the led on/off time per HW according + * to the deviation to achieve the desired led frequency. + * The detail algorithm is described in iwl-led.c + * @chain_noise_num_beacons: number of beacons used to compute chain noise + * @adv_thermal_throttle: support advance thermal throttle + * @support_ct_kill_exit: support ct kill exit condition + * @support_wimax_coexist: support wimax/wifi co-exist + * @plcp_delta_threshold: plcp error rate threshold used to trigger + * radio tuning when there is a high receiving plcp error rate + * @chain_noise_scale: default chain noise scale used for gain computation + * @wd_timeout: TX queues watchdog timeout + * @max_event_log_size: size of event log buffer size for ucode event logging + * @shadow_reg_enable: HW shadhow register bit + * @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up + * @no_idle_support: do not support idle mode + * wd_disable: disable watchdog timer + */ +struct iwl_base_params { + int eeprom_size; + int num_of_queues; /* def: HW dependent */ + int num_of_ampdu_queues;/* def: HW dependent */ + /* for iwl_apm_init() */ + u32 pll_cfg_val; + + const u16 max_ll_items; + const bool shadow_ram_support; + u16 led_compensation; + bool adv_thermal_throttle; + bool support_ct_kill_exit; + const bool support_wimax_coexist; + u8 plcp_delta_threshold; + s32 chain_noise_scale; + unsigned int wd_timeout; + u32 max_event_log_size; + const bool shadow_reg_enable; + const bool hd_v2; + const bool no_idle_support; + const bool wd_disable; +}; + +/* + * @advanced_bt_coexist: support advanced bt coexist + * @bt_init_traffic_load: specify initial bt traffic load + * @bt_prio_boost: default bt priority boost value + * @agg_time_limit: maximum number of uSec in aggregation + * @bt_sco_disable: uCode should not response to BT in SCO/ESCO mode + */ +struct iwl_bt_params { + bool advanced_bt_coexist; + u8 bt_init_traffic_load; + u8 bt_prio_boost; + u16 agg_time_limit; + bool bt_sco_disable; + bool bt_session_2; +}; +/* + * @use_rts_for_aggregation: use rts/cts protection for HT traffic + */ +struct iwl_ht_params { + const bool ht_greenfield_support; /* if used set to true */ + bool use_rts_for_aggregation; + enum ieee80211_smps_mode smps_mode; }; /** @@ -281,9 +285,10 @@ enum iwl_led_mode { * @ucode_api_ok: oldest version of the uCode API that is OK to load * without a warning, for use in transitions * @ucode_api_min: Lowest version of uCode API supported by driver. + * @max_inst_size: The maximal length of the fw inst section + * @max_data_size: The maximal length of the fw data section * @valid_tx_ant: valid transmit antenna * @valid_rx_ant: valid receive antenna - * @sku: sku information from EEPROM * @eeprom_ver: EEPROM version * @eeprom_calib_ver: EEPROM calibration version * @lib: pointer to the lib ops @@ -291,7 +296,6 @@ enum iwl_led_mode { * @base_params: pointer to basic parameters * @ht_params: point to ht patameters * @bt_params: pointer to bt parameters - * @pa_type: used by 6000 series only to identify the type of Power Amplifier * @need_temp_offset_calib: need to perform temperature offset calibration * @no_xtal_calib: some devices do not need crystal calibration data, * don't send it to those @@ -318,19 +322,19 @@ struct iwl_cfg { const unsigned int ucode_api_max; const unsigned int ucode_api_ok; const unsigned int ucode_api_min; + const u32 max_data_size; + const u32 max_inst_size; u8 valid_tx_ant; u8 valid_rx_ant; - u16 sku; u16 eeprom_ver; u16 eeprom_calib_ver; const struct iwl_lib_ops *lib; void (*additional_nic_config)(struct iwl_priv *priv); /* params not likely to change within a device family */ - struct iwl_base_params *base_params; + const struct iwl_base_params *base_params; /* params likely to change within a device family */ - struct iwl_ht_params *ht_params; - struct iwl_bt_params *bt_params; - enum iwl_pa_type pa_type; /* if used set to IWL_PA_SYSTEM */ + const struct iwl_ht_params *ht_params; + const struct iwl_bt_params *bt_params; const bool need_temp_offset_calib; /* if used set to true */ const bool no_xtal_calib; u8 scan_rx_antennas[IEEE80211_NUM_BANDS]; @@ -345,10 +349,6 @@ struct iwl_cfg { /** * struct iwl_shared - shared fields for all the layers of the driver * - * @dbg_level_dev: dbg level set per device. Prevails on - * iwlagn_mod_params.debug_level if set (!= 0) - * @ucode_owner: IWL_OWNERSHIP_* - * @cmd_queue: command queue number * @status: STATUS_* * @wowlan: are we running wowlan uCode * @valid_contexts: microcode/device supports multiple contexts @@ -356,45 +356,22 @@ struct iwl_cfg { * @cfg: see struct iwl_cfg * @priv: pointer to the upper layer data * @trans: pointer to the transport layer data + * @nic: pointer to the nic data * @hw_params: see struct iwl_hw_params - * @workqueue: the workqueue used by all the layers of the driver * @lock: protect general shared data - * @sta_lock: protects the station table. - * If lock and sta_lock are needed, lock must be acquired first. - * @mutex: - * @wait_command_queue: the wait_queue for SYNC host command nad uCode load * @eeprom: pointer to the eeprom/OTP image * @ucode_type: indicator of loaded ucode image - * @notif_waits: things waiting for notification - * @notif_wait_lock: lock protecting notification - * @notif_waitq: head of notification wait queue * @device_pointers: pointers to ucode event tables */ struct iwl_shared { -#ifdef CONFIG_IWLWIFI_DEBUG - u32 dbg_level_dev; -#endif /* CONFIG_IWLWIFI_DEBUG */ - -#define IWL_OWNERSHIP_DRIVER 0 -#define IWL_OWNERSHIP_TM 1 - u8 ucode_owner; - u8 cmd_queue; unsigned long status; - bool wowlan; u8 valid_contexts; - struct iwl_bus *bus; - struct iwl_cfg *cfg; - struct iwl_priv *priv; + const struct iwl_cfg *cfg; struct iwl_trans *trans; + void *drv; struct iwl_hw_params hw_params; - - struct workqueue_struct *workqueue; - spinlock_t lock; - spinlock_t sta_lock; - struct mutex mutex; - - wait_queue_head_t wait_command_queue; + const struct iwl_fw *fw; /* eeprom -- this is in the card's little endian byte order */ u8 *eeprom; @@ -402,11 +379,6 @@ struct iwl_shared { /* ucode related variables */ enum iwl_ucode_type ucode_type; - /* notification wait support */ - struct list_head notif_waits; - spinlock_t notif_wait_lock; - wait_queue_head_t notif_waitq; - struct { u32 error_event_table; u32 log_event_table; @@ -414,112 +386,14 @@ struct iwl_shared { }; -/*Whatever _m is (iwl_trans, iwl_priv, iwl_bus, these macros will work */ -#define priv(_m) ((_m)->shrd->priv) +/*Whatever _m is (iwl_trans, iwl_priv, these macros will work */ #define cfg(_m) ((_m)->shrd->cfg) -#define bus(_m) ((_m)->shrd->bus) #define trans(_m) ((_m)->shrd->trans) #define hw_params(_m) ((_m)->shrd->hw_params) -#ifdef CONFIG_IWLWIFI_DEBUG -/* - * iwl_get_debug_level: Return active debug level for device - * - * Using sysfs it is possible to set per device debug level. This debug - * level will be used if set, otherwise the global debug level which can be - * set via module parameter is used. - */ -static inline u32 iwl_get_debug_level(struct iwl_shared *shrd) +static inline bool iwl_have_debug_level(u32 level) { - if (shrd->dbg_level_dev) - return shrd->dbg_level_dev; - else - return iwlagn_mod_params.debug_level; -} -#else -static inline u32 iwl_get_debug_level(struct iwl_shared *shrd) -{ - return iwlagn_mod_params.debug_level; -} -#endif - -static inline void iwl_free_pages(struct iwl_shared *shrd, unsigned long page) -{ - free_pages(page, shrd->hw_params.rx_page_order); -} - -/** - * iwl_queue_inc_wrap - increment queue index, wrap back to beginning - * @index -- current index - * @n_bd -- total number of entries in queue (must be power of 2) - */ -static inline int iwl_queue_inc_wrap(int index, int n_bd) -{ - return ++index & (n_bd - 1); -} - -/** - * iwl_queue_dec_wrap - decrement queue index, wrap back to end - * @index -- current index - * @n_bd -- total number of entries in queue (must be power of 2) - */ -static inline int iwl_queue_dec_wrap(int index, int n_bd) -{ - return --index & (n_bd - 1); -} - -struct iwl_rx_mem_buffer { - dma_addr_t page_dma; - struct page *page; - struct list_head list; -}; - -#define rxb_addr(r) page_address(r->page) - -/* - * mac80211 queues, ACs, hardware queues, FIFOs. - * - * Cf. http://wireless.kernel.org/en/developers/Documentation/mac80211/queues - * - * Mac80211 uses the following numbers, which we get as from it - * by way of skb_get_queue_mapping(skb): - * - * VO 0 - * VI 1 - * BE 2 - * BK 3 - * - * - * Regular (not A-MPDU) frames are put into hardware queues corresponding - * to the FIFOs, see comments in iwl-prph.h. Aggregated frames get their - * own queue per aggregation session (RA/TID combination), such queues are - * set up to map into FIFOs too, for which we need an AC->FIFO mapping. In - * order to map frames to the right queue, we also need an AC->hw queue - * mapping. This is implemented here. - * - * Due to the way hw queues are set up (by the hw specific modules like - * iwl-4965.c, iwl-5000.c etc.), the AC->hw queue mapping is the identity - * mapping. - */ - -static const u8 tid_to_ac[] = { - IEEE80211_AC_BE, - IEEE80211_AC_BK, - IEEE80211_AC_BK, - IEEE80211_AC_BE, - IEEE80211_AC_VI, - IEEE80211_AC_VI, - IEEE80211_AC_VO, - IEEE80211_AC_VO -}; - -static inline int get_ac_from_tid(u16 tid) -{ - if (likely(tid < ARRAY_SIZE(tid_to_ac))) - return tid_to_ac[tid]; - - /* no support for TIDs 8-15 yet */ - return -EINVAL; + return iwlagn_mod_params.debug_level & level; } enum iwl_rxon_context_id { @@ -529,64 +403,10 @@ enum iwl_rxon_context_id { NUM_IWL_RXON_CTX }; -int iwl_probe(struct iwl_bus *bus, const struct iwl_trans_ops *trans_ops, - struct iwl_cfg *cfg); -void __devexit iwl_remove(struct iwl_priv * priv); -struct iwl_device_cmd; -int __must_check iwl_rx_dispatch(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb, - struct iwl_device_cmd *cmd); - int iwlagn_hw_valid_rtc_data_addr(u32 addr); -void iwl_set_hw_rfkill_state(struct iwl_priv *priv, bool state); -void iwl_nic_config(struct iwl_priv *priv); -void iwl_free_skb(struct iwl_priv *priv, struct sk_buff *skb); -void iwl_apm_stop(struct iwl_priv *priv); -int iwl_apm_init(struct iwl_priv *priv); -void iwlagn_fw_error(struct iwl_priv *priv, bool ondemand); const char *get_cmd_string(u8 cmd); -bool iwl_check_for_ct_kill(struct iwl_priv *priv); - -void iwl_stop_sw_queue(struct iwl_priv *priv, u8 ac); -void iwl_wake_sw_queue(struct iwl_priv *priv, u8 ac); - -/* notification wait support */ -void iwl_abort_notification_waits(struct iwl_shared *shrd); -void __acquires(wait_entry) -iwl_init_notification_wait(struct iwl_shared *shrd, - struct iwl_notification_wait *wait_entry, - u8 cmd, - void (*fn)(struct iwl_trans *trans, - struct iwl_rx_packet *pkt, - void *data), - void *fn_data); -int __must_check __releases(wait_entry) -iwl_wait_notification(struct iwl_shared *shrd, - struct iwl_notification_wait *wait_entry, - unsigned long timeout); -void __releases(wait_entry) -iwl_remove_notification(struct iwl_shared *shrd, - struct iwl_notification_wait *wait_entry); - -#ifdef CONFIG_IWLWIFI_DEBUGFS -void iwl_reset_traffic_log(struct iwl_priv *priv); -#endif /* CONFIG_IWLWIFI_DEBUGFS */ - -#ifdef CONFIG_IWLWIFI_DEBUG -void iwl_print_rx_config_cmd(struct iwl_priv *priv, - enum iwl_rxon_context_id ctxid); -#else -static inline void iwl_print_rx_config_cmd(struct iwl_priv *priv, - enum iwl_rxon_context_id ctxid) -{ -} -#endif #define IWL_CMD(x) case x: return #x -#define IWL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo)))) - -#define IWL_TRAFFIC_ENTRIES (256) -#define IWL_TRAFFIC_ENTRY_SIZE (64) /***************************************************** * DRIVER STATUS FUNCTIONS @@ -612,46 +432,4 @@ static inline void iwl_print_rx_config_cmd(struct iwl_priv *priv, #define STATUS_CHANNEL_SWITCH_PENDING 19 #define STATUS_SCAN_COMPLETE 20 -static inline int iwl_is_ready(struct iwl_shared *shrd) -{ - /* The adapter is 'ready' if READY and GEO_CONFIGURED bits are - * set but EXIT_PENDING is not */ - return test_bit(STATUS_READY, &shrd->status) && - test_bit(STATUS_GEO_CONFIGURED, &shrd->status) && - !test_bit(STATUS_EXIT_PENDING, &shrd->status); -} - -static inline int iwl_is_alive(struct iwl_shared *shrd) -{ - return test_bit(STATUS_ALIVE, &shrd->status); -} - -static inline int iwl_is_init(struct iwl_shared *shrd) -{ - return test_bit(STATUS_INIT, &shrd->status); -} - -static inline int iwl_is_rfkill_hw(struct iwl_shared *shrd) -{ - return test_bit(STATUS_RF_KILL_HW, &shrd->status); -} - -static inline int iwl_is_rfkill(struct iwl_shared *shrd) -{ - return iwl_is_rfkill_hw(shrd); -} - -static inline int iwl_is_ctkill(struct iwl_shared *shrd) -{ - return test_bit(STATUS_CT_KILL, &shrd->status); -} - -static inline int iwl_is_ready_rf(struct iwl_shared *shrd) -{ - if (iwl_is_rfkill(shrd)) - return 0; - - return iwl_is_ready(shrd); -} - #endif /* #__iwl_shared_h__ */ |