diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-rx.c')
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-rx.c | 163 |
1 files changed, 43 insertions, 120 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c index e81bfc42a7cb..7cde9d76ff5d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -376,7 +376,9 @@ int iwl_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq) { int ret; unsigned long flags; - unsigned int rb_size; + u32 rb_size; + const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */ + const u32 rb_timeout = 0; /* FIXME: RX_RB_TIMEOUT why this stalls RX */ spin_lock_irqsave(&priv->lock, flags); ret = iwl_grab_nic_access(priv); @@ -398,26 +400,32 @@ int iwl_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq) /* Tell device where to find RBD circular buffer in DRAM */ iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_BASE_REG, - rxq->dma_addr >> 8); + (u32)(rxq->dma_addr >> 8)); /* Tell device where in DRAM to update its Rx status */ iwl_write_direct32(priv, FH_RSCSR_CHNL0_STTS_WPTR_REG, (priv->shared_phys + priv->rb_closed_offset) >> 4); - /* Enable Rx DMA, enable host interrupt, Rx buffer size 4k, 256 RBDs */ + /* Enable Rx DMA + * FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY is set becuase of HW bug in + * the credit mechanism in 5000 HW RX FIFO + * Direct rx interrupts to hosts + * Rx buffer size 4 or 8k + * RB timeout 0x10 + * 256 RBDs + */ iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL | + FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY | FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL | - rb_size | - /* 0x10 << 4 | */ - (RX_QUEUE_SIZE_LOG << - FH_RCSR_RX_CONFIG_RBDCB_SIZE_BITSHIFT)); - - /* - * iwl_write32(priv,CSR_INT_COAL_REG,0); - */ + rb_size| + (rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)| + (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS)); iwl_release_nic_access(priv); + + iwl_write32(priv, CSR_INT_COALESCING, 0x40); + spin_unlock_irqrestore(&priv->lock, flags); return 0; @@ -789,107 +797,6 @@ static inline void iwl_dbg_report_frame(struct iwl_priv *priv, } #endif -static void iwl_add_radiotap(struct iwl_priv *priv, - struct sk_buff *skb, - struct iwl_rx_phy_res *rx_start, - struct ieee80211_rx_status *stats, - u32 ampdu_status) -{ - s8 signal = stats->signal; - s8 noise = 0; - int rate = stats->rate_idx; - u64 tsf = stats->mactime; - __le16 antenna; - __le16 phy_flags_hw = rx_start->phy_flags; - struct iwl4965_rt_rx_hdr { - struct ieee80211_radiotap_header rt_hdr; - __le64 rt_tsf; /* TSF */ - u8 rt_flags; /* radiotap packet flags */ - u8 rt_rate; /* rate in 500kb/s */ - __le16 rt_channelMHz; /* channel in MHz */ - __le16 rt_chbitmask; /* channel bitfield */ - s8 rt_dbmsignal; /* signal in dBm, kluged to signed */ - s8 rt_dbmnoise; - u8 rt_antenna; /* antenna number */ - } __attribute__ ((packed)) *iwl4965_rt; - - /* TODO: We won't have enough headroom for HT frames. Fix it later. */ - if (skb_headroom(skb) < sizeof(*iwl4965_rt)) { - if (net_ratelimit()) - printk(KERN_ERR "not enough headroom [%d] for " - "radiotap head [%zd]\n", - skb_headroom(skb), sizeof(*iwl4965_rt)); - return; - } - - /* put radiotap header in front of 802.11 header and data */ - iwl4965_rt = (void *)skb_push(skb, sizeof(*iwl4965_rt)); - - /* initialise radiotap header */ - iwl4965_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION; - iwl4965_rt->rt_hdr.it_pad = 0; - - /* total header + data */ - put_unaligned_le16(sizeof(*iwl4965_rt), &iwl4965_rt->rt_hdr.it_len); - - /* Indicate all the fields we add to the radiotap header */ - put_unaligned_le32((1 << IEEE80211_RADIOTAP_TSFT) | - (1 << IEEE80211_RADIOTAP_FLAGS) | - (1 << IEEE80211_RADIOTAP_RATE) | - (1 << IEEE80211_RADIOTAP_CHANNEL) | - (1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) | - (1 << IEEE80211_RADIOTAP_DBM_ANTNOISE) | - (1 << IEEE80211_RADIOTAP_ANTENNA), - &(iwl4965_rt->rt_hdr.it_present)); - - /* Zero the flags, we'll add to them as we go */ - iwl4965_rt->rt_flags = 0; - - put_unaligned_le64(tsf, &iwl4965_rt->rt_tsf); - - iwl4965_rt->rt_dbmsignal = signal; - iwl4965_rt->rt_dbmnoise = noise; - - /* Convert the channel frequency and set the flags */ - put_unaligned(cpu_to_le16(stats->freq), &iwl4965_rt->rt_channelMHz); - if (!(phy_flags_hw & RX_RES_PHY_FLAGS_BAND_24_MSK)) - put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_5GHZ, - &iwl4965_rt->rt_chbitmask); - else if (phy_flags_hw & RX_RES_PHY_FLAGS_MOD_CCK_MSK) - put_unaligned_le16(IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ, - &iwl4965_rt->rt_chbitmask); - else /* 802.11g */ - put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ, - &iwl4965_rt->rt_chbitmask); - - if (rate == -1) - iwl4965_rt->rt_rate = 0; - else - iwl4965_rt->rt_rate = iwl_rates[rate].ieee; - - /* - * "antenna number" - * - * It seems that the antenna field in the phy flags value - * is actually a bitfield. This is undefined by radiotap, - * it wants an actual antenna number but I always get "7" - * for most legacy frames I receive indicating that the - * same frame was received on all three RX chains. - * - * I think this field should be removed in favour of a - * new 802.11n radiotap field "RX chains" that is defined - * as a bitmask. - */ - antenna = phy_flags_hw & RX_RES_PHY_FLAGS_ANTENNA_MSK; - iwl4965_rt->rt_antenna = le16_to_cpu(antenna) >> 4; - - /* set the preamble flag if appropriate */ - if (phy_flags_hw & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) - iwl4965_rt->rt_flags |= IEEE80211_RADIOTAP_F_SHORTPRE; - - stats->flag |= RX_FLAG_RADIOTAP; -} - static void iwl_update_rx_stats(struct iwl_priv *priv, u16 fc, u16 len) { /* 0 - mgmt, 1 - cnt, 2 - data */ @@ -1074,9 +981,6 @@ static void iwl_pass_packet_to_mac80211(struct iwl_priv *priv, iwl_set_decrypted_flag(priv, hdr, ampdu_status, stats)) return; - if (priv->add_radiotap) - iwl_add_radiotap(priv, rxb->skb, rx_start, stats, ampdu_status); - iwl_update_rx_stats(priv, le16_to_cpu(hdr->frame_control), len); ieee80211_rx_irqsafe(priv->hw, rxb->skb, stats); priv->alloc_rxb_skb--; @@ -1130,10 +1034,10 @@ static int iwl_is_network_packet(struct iwl_priv *priv, /* Filter incoming packets to determine if they are targeted toward * this network, discarding packets coming from ourselves */ switch (priv->iw_mode) { - case IEEE80211_IF_TYPE_IBSS: /* Header: Dest. | Source | BSSID */ + case NL80211_IFTYPE_ADHOC: /* Header: Dest. | Source | BSSID */ /* packets to our IBSS update information */ return !compare_ether_addr(header->addr3, priv->bssid); - case IEEE80211_IF_TYPE_STA: /* Header: Dest. | AP{BSSID} | Source */ + case NL80211_IFTYPE_STATION: /* Header: Dest. | AP{BSSID} | Source */ /* packets to our IBSS update information */ return !compare_ether_addr(header->addr2, priv->bssid); default: @@ -1171,7 +1075,6 @@ void iwl_rx_reply_rx(struct iwl_priv *priv, if (rx_status.band == IEEE80211_BAND_5GHZ) rx_status.rate_idx -= IWL_FIRST_OFDM_RATE; - rx_status.antenna = 0; rx_status.flag = 0; /* TSF isn't reliable. In order to allow smooth user experience, @@ -1253,8 +1156,28 @@ void iwl_rx_reply_rx(struct iwl_priv *priv, rx_status.signal, rx_status.noise, rx_status.signal, (unsigned long long)rx_status.mactime); + /* + * "antenna number" + * + * It seems that the antenna field in the phy flags value + * is actually a bitfield. This is undefined by radiotap, + * it wants an actual antenna number but I always get "7" + * for most legacy frames I receive indicating that the + * same frame was received on all three RX chains. + * + * I think this field should be removed in favour of a + * new 802.11n radiotap field "RX chains" that is defined + * as a bitmask. + */ + rx_status.antenna = le16_to_cpu(rx_start->phy_flags & + RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4; + + /* set the preamble flag if appropriate */ + if (rx_start->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) + rx_status.flag |= RX_FLAG_SHORTPRE; + /* Take shortcut when only in monitor mode */ - if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { + if (priv->iw_mode == NL80211_IFTYPE_MONITOR) { iwl_pass_packet_to_mac80211(priv, include_phy, rxb, &rx_status); return; @@ -1271,7 +1194,7 @@ void iwl_rx_reply_rx(struct iwl_priv *priv, switch (fc & IEEE80211_FCTL_FTYPE) { case IEEE80211_FTYPE_MGMT: case IEEE80211_FTYPE_DATA: - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) + if (priv->iw_mode == NL80211_IFTYPE_AP) iwl_update_ps_mode(priv, fc & IEEE80211_FCTL_PM, header->addr2); /* fall through */ |