summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intersil/prism54/islpci_eth.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/intersil/prism54/islpci_eth.c')
-rw-r--r--drivers/net/wireless/intersil/prism54/islpci_eth.c489
1 files changed, 0 insertions, 489 deletions
diff --git a/drivers/net/wireless/intersil/prism54/islpci_eth.c b/drivers/net/wireless/intersil/prism54/islpci_eth.c
deleted file mode 100644
index 74dd65716afd..000000000000
--- a/drivers/net/wireless/intersil/prism54/islpci_eth.c
+++ /dev/null
@@ -1,489 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2002 Intersil Americas Inc.
- * Copyright (C) 2004 Aurelien Alleaume <slts@free.fr>
- */
-
-#include <linux/module.h>
-#include <linux/gfp.h>
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/if_arp.h>
-#include <asm/byteorder.h>
-
-#include "prismcompat.h"
-#include "isl_38xx.h"
-#include "islpci_eth.h"
-#include "islpci_mgt.h"
-#include "oid_mgt.h"
-
-/******************************************************************************
- Network Interface functions
-******************************************************************************/
-void
-islpci_eth_cleanup_transmit(islpci_private *priv,
- isl38xx_control_block *control_block)
-{
- struct sk_buff *skb;
- u32 index;
-
- /* compare the control block read pointer with the free pointer */
- while (priv->free_data_tx !=
- le32_to_cpu(control_block->
- device_curr_frag[ISL38XX_CB_TX_DATA_LQ])) {
- /* read the index of the first fragment to be freed */
- index = priv->free_data_tx % ISL38XX_CB_TX_QSIZE;
-
- /* check for holes in the arrays caused by multi fragment frames
- * searching for the last fragment of a frame */
- if (priv->pci_map_tx_address[index]) {
- /* entry is the last fragment of a frame
- * free the skb structure and unmap pci memory */
- skb = priv->data_low_tx[index];
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
- DEBUG(SHOW_TRACING,
- "cleanup skb %p skb->data %p skb->len %u truesize %u\n",
- skb, skb->data, skb->len, skb->truesize);
-#endif
-
- dma_unmap_single(&priv->pdev->dev,
- priv->pci_map_tx_address[index],
- skb->len, DMA_TO_DEVICE);
- dev_kfree_skb_irq(skb);
- skb = NULL;
- }
- /* increment the free data low queue pointer */
- priv->free_data_tx++;
- }
-}
-
-netdev_tx_t
-islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
-{
- islpci_private *priv = netdev_priv(ndev);
- isl38xx_control_block *cb = priv->control_block;
- u32 index;
- dma_addr_t pci_map_address;
- int frame_size;
- isl38xx_fragment *fragment;
- int offset;
- struct sk_buff *newskb;
- int newskb_offset;
- unsigned long flags;
- unsigned char wds_mac[6];
- u32 curr_frag;
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
- DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_transmit\n");
-#endif
-
- /* lock the driver code */
- spin_lock_irqsave(&priv->slock, flags);
-
- /* check whether the destination queue has enough fragments for the frame */
- curr_frag = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_TX_DATA_LQ]);
- if (unlikely(curr_frag - priv->free_data_tx >= ISL38XX_CB_TX_QSIZE)) {
- printk(KERN_ERR "%s: transmit device queue full when awake\n",
- ndev->name);
- netif_stop_queue(ndev);
-
- /* trigger the device */
- isl38xx_w32_flush(priv->device_base, ISL38XX_DEV_INT_UPDATE,
- ISL38XX_DEV_INT_REG);
- udelay(ISL38XX_WRITEIO_DELAY);
- goto drop_free;
- }
- /* Check alignment and WDS frame formatting. The start of the packet should
- * be aligned on a 4-byte boundary. If WDS is enabled add another 6 bytes
- * and add WDS address information */
- if (likely(((long) skb->data & 0x03) | init_wds)) {
- /* get the number of bytes to add and re-align */
- offset = (4 - (long) skb->data) & 0x03;
- offset += init_wds ? 6 : 0;
-
- /* check whether the current skb can be used */
- if (!skb_cloned(skb) && (skb_tailroom(skb) >= offset)) {
- unsigned char *src = skb->data;
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
- DEBUG(SHOW_TRACING, "skb offset %i wds %i\n", offset,
- init_wds);
-#endif
-
- /* align the buffer on 4-byte boundary */
- skb_reserve(skb, (4 - (long) skb->data) & 0x03);
- if (init_wds) {
- /* wds requires an additional address field of 6 bytes */
- skb_put(skb, 6);
-#ifdef ISLPCI_ETH_DEBUG
- printk("islpci_eth_transmit:wds_mac\n");
-#endif
- memmove(skb->data + 6, src, skb->len);
- skb_copy_to_linear_data(skb, wds_mac, 6);
- } else {
- memmove(skb->data, src, skb->len);
- }
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
- DEBUG(SHOW_TRACING, "memmove %p %p %i\n", skb->data,
- src, skb->len);
-#endif
- } else {
- newskb =
- dev_alloc_skb(init_wds ? skb->len + 6 : skb->len);
- if (unlikely(newskb == NULL)) {
- printk(KERN_ERR "%s: Cannot allocate skb\n",
- ndev->name);
- goto drop_free;
- }
- newskb_offset = (4 - (long) newskb->data) & 0x03;
-
- /* Check if newskb->data is aligned */
- if (newskb_offset)
- skb_reserve(newskb, newskb_offset);
-
- skb_put(newskb, init_wds ? skb->len + 6 : skb->len);
- if (init_wds) {
- skb_copy_from_linear_data(skb,
- newskb->data + 6,
- skb->len);
- skb_copy_to_linear_data(newskb, wds_mac, 6);
-#ifdef ISLPCI_ETH_DEBUG
- printk("islpci_eth_transmit:wds_mac\n");
-#endif
- } else
- skb_copy_from_linear_data(skb, newskb->data,
- skb->len);
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
- DEBUG(SHOW_TRACING, "memcpy %p %p %i wds %i\n",
- newskb->data, skb->data, skb->len, init_wds);
-#endif
-
- newskb->dev = skb->dev;
- dev_kfree_skb_irq(skb);
- skb = newskb;
- }
- }
- /* display the buffer contents for debugging */
-#if VERBOSE > SHOW_ERROR_MESSAGES
- DEBUG(SHOW_BUFFER_CONTENTS, "\ntx %p ", skb->data);
- display_buffer((char *) skb->data, skb->len);
-#endif
-
- /* map the skb buffer to pci memory for DMA operation */
- pci_map_address = dma_map_single(&priv->pdev->dev, (void *)skb->data,
- skb->len, DMA_TO_DEVICE);
- if (dma_mapping_error(&priv->pdev->dev, pci_map_address)) {
- printk(KERN_WARNING "%s: cannot map buffer to PCI\n",
- ndev->name);
- goto drop_free;
- }
- /* Place the fragment in the control block structure. */
- index = curr_frag % ISL38XX_CB_TX_QSIZE;
- fragment = &cb->tx_data_low[index];
-
- priv->pci_map_tx_address[index] = pci_map_address;
- /* store the skb address for future freeing */
- priv->data_low_tx[index] = skb;
- /* set the proper fragment start address and size information */
- frame_size = skb->len;
- fragment->size = cpu_to_le16(frame_size);
- fragment->flags = cpu_to_le16(0); /* set to 1 if more fragments */
- fragment->address = cpu_to_le32(pci_map_address);
- curr_frag++;
-
- /* The fragment address in the control block must have been
- * written before announcing the frame buffer to device. */
- wmb();
- cb->driver_curr_frag[ISL38XX_CB_TX_DATA_LQ] = cpu_to_le32(curr_frag);
-
- if (curr_frag - priv->free_data_tx + ISL38XX_MIN_QTHRESHOLD
- > ISL38XX_CB_TX_QSIZE) {
- /* stop sends from upper layers */
- netif_stop_queue(ndev);
-
- /* set the full flag for the transmission queue */
- priv->data_low_tx_full = 1;
- }
-
- ndev->stats.tx_packets++;
- ndev->stats.tx_bytes += skb->len;
-
- /* trigger the device */
- islpci_trigger(priv);
-
- /* unlock the driver code */
- spin_unlock_irqrestore(&priv->slock, flags);
-
- return NETDEV_TX_OK;
-
- drop_free:
- ndev->stats.tx_dropped++;
- spin_unlock_irqrestore(&priv->slock, flags);
- dev_kfree_skb(skb);
- return NETDEV_TX_OK;
-}
-
-static inline int
-islpci_monitor_rx(islpci_private *priv, struct sk_buff **skb)
-{
- /* The card reports full 802.11 packets but with a 20 bytes
- * header and without the FCS. But there a is a bit that
- * indicates if the packet is corrupted :-) */
- struct rfmon_header *hdr = (struct rfmon_header *) (*skb)->data;
-
- if (hdr->flags & 0x01)
- /* This one is bad. Drop it ! */
- return -1;
- if (priv->ndev->type == ARPHRD_IEEE80211_PRISM) {
- struct avs_80211_1_header *avs;
- /* extract the relevant data from the header */
- u32 clock = le32_to_cpu(hdr->clock);
- u8 rate = hdr->rate;
- u16 freq = le16_to_cpu(hdr->freq);
- u8 rssi = hdr->rssi;
-
- skb_pull(*skb, sizeof (struct rfmon_header));
-
- if (skb_headroom(*skb) < sizeof (struct avs_80211_1_header)) {
- struct sk_buff *newskb = skb_copy_expand(*skb,
- sizeof (struct
- avs_80211_1_header),
- 0, GFP_ATOMIC);
- if (newskb) {
- dev_kfree_skb_irq(*skb);
- *skb = newskb;
- } else
- return -1;
- /* This behavior is not very subtile... */
- }
-
- /* make room for the new header and fill it. */
- avs = skb_push(*skb, sizeof(struct avs_80211_1_header));
-
- avs->version = cpu_to_be32(P80211CAPTURE_VERSION);
- avs->length = cpu_to_be32(sizeof (struct avs_80211_1_header));
- avs->mactime = cpu_to_be64(clock);
- avs->hosttime = cpu_to_be64(jiffies);
- avs->phytype = cpu_to_be32(6); /*OFDM: 6 for (g), 8 for (a) */
- avs->channel = cpu_to_be32(channel_of_freq(freq));
- avs->datarate = cpu_to_be32(rate * 5);
- avs->antenna = cpu_to_be32(0); /*unknown */
- avs->priority = cpu_to_be32(0); /*unknown */
- avs->ssi_type = cpu_to_be32(3); /*2: dBm, 3: raw RSSI */
- avs->ssi_signal = cpu_to_be32(rssi & 0x7f);
- avs->ssi_noise = cpu_to_be32(priv->local_iwstatistics.qual.noise); /*better than 'undefined', I assume */
- avs->preamble = cpu_to_be32(0); /*unknown */
- avs->encoding = cpu_to_be32(0); /*unknown */
- } else
- skb_pull(*skb, sizeof (struct rfmon_header));
-
- (*skb)->protocol = htons(ETH_P_802_2);
- skb_reset_mac_header(*skb);
- (*skb)->pkt_type = PACKET_OTHERHOST;
-
- return 0;
-}
-
-int
-islpci_eth_receive(islpci_private *priv)
-{
- struct net_device *ndev = priv->ndev;
- isl38xx_control_block *control_block = priv->control_block;
- struct sk_buff *skb;
- u16 size;
- u32 index, offset;
- unsigned char *src;
- int discard = 0;
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
- DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_receive\n");
-#endif
-
- /* the device has written an Ethernet frame in the data area
- * of the sk_buff without updating the structure, do it now */
- index = priv->free_data_rx % ISL38XX_CB_RX_QSIZE;
- size = le16_to_cpu(control_block->rx_data_low[index].size);
- skb = priv->data_low_rx[index];
- offset = ((unsigned long)
- le32_to_cpu(control_block->rx_data_low[index].address) -
- (unsigned long) skb->data) & 3;
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
- DEBUG(SHOW_TRACING,
- "frq->addr %x skb->data %p skb->len %u offset %u truesize %u\n",
- control_block->rx_data_low[priv->free_data_rx].address, skb->data,
- skb->len, offset, skb->truesize);
-#endif
-
- /* delete the streaming DMA mapping before processing the skb */
- dma_unmap_single(&priv->pdev->dev, priv->pci_map_rx_address[index],
- MAX_FRAGMENT_SIZE_RX + 2, DMA_FROM_DEVICE);
-
- /* update the skb structure and align the buffer */
- skb_put(skb, size);
- if (offset) {
- /* shift the buffer allocation offset bytes to get the right frame */
- skb_pull(skb, 2);
- skb_put(skb, 2);
- }
-#if VERBOSE > SHOW_ERROR_MESSAGES
- /* display the buffer contents for debugging */
- DEBUG(SHOW_BUFFER_CONTENTS, "\nrx %p ", skb->data);
- display_buffer((char *) skb->data, skb->len);
-#endif
-
- /* check whether WDS is enabled and whether the data frame is a WDS frame */
-
- if (init_wds) {
- /* WDS enabled, check for the wds address on the first 6 bytes of the buffer */
- src = skb->data + 6;
- memmove(skb->data, src, skb->len - 6);
- skb_trim(skb, skb->len - 6);
- }
-#if VERBOSE > SHOW_ERROR_MESSAGES
- DEBUG(SHOW_TRACING, "Fragment size %i in skb at %p\n", size, skb);
- DEBUG(SHOW_TRACING, "Skb data at %p, length %i\n", skb->data, skb->len);
-
- /* display the buffer contents for debugging */
- DEBUG(SHOW_BUFFER_CONTENTS, "\nrx %p ", skb->data);
- display_buffer((char *) skb->data, skb->len);
-#endif
- /* take care of monitor mode and spy monitoring. */
- if (unlikely(priv->iw_mode == IW_MODE_MONITOR)) {
- skb->dev = ndev;
- discard = islpci_monitor_rx(priv, &skb);
- } else {
- if (unlikely(skb->data[2 * ETH_ALEN] == 0)) {
- /* The packet has a rx_annex. Read it for spy monitoring, Then
- * remove it, while keeping the 2 leading MAC addr.
- */
- struct iw_quality wstats;
- struct rx_annex_header *annex =
- (struct rx_annex_header *) skb->data;
- wstats.level = annex->rfmon.rssi;
- /* The noise value can be a bit outdated if nobody's
- * reading wireless stats... */
- wstats.noise = priv->local_iwstatistics.qual.noise;
- wstats.qual = wstats.level - wstats.noise;
- wstats.updated = 0x07;
- /* Update spy records */
- wireless_spy_update(ndev, annex->addr2, &wstats);
-
- skb_copy_from_linear_data(skb,
- (skb->data +
- sizeof(struct rfmon_header)),
- 2 * ETH_ALEN);
- skb_pull(skb, sizeof (struct rfmon_header));
- }
- skb->protocol = eth_type_trans(skb, ndev);
- }
- skb->ip_summed = CHECKSUM_NONE;
- ndev->stats.rx_packets++;
- ndev->stats.rx_bytes += size;
-
- /* deliver the skb to the network layer */
-#ifdef ISLPCI_ETH_DEBUG
- printk
- ("islpci_eth_receive:netif_rx %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
- skb->data[0], skb->data[1], skb->data[2], skb->data[3],
- skb->data[4], skb->data[5]);
-#endif
- if (unlikely(discard)) {
- dev_kfree_skb_irq(skb);
- skb = NULL;
- } else
- netif_rx(skb);
-
- /* increment the read index for the rx data low queue */
- priv->free_data_rx++;
-
- /* add one or more sk_buff structures */
- while (index =
- le32_to_cpu(control_block->
- driver_curr_frag[ISL38XX_CB_RX_DATA_LQ]),
- index - priv->free_data_rx < ISL38XX_CB_RX_QSIZE) {
- /* allocate an sk_buff for received data frames storage
- * include any required allignment operations */
- skb = dev_alloc_skb(MAX_FRAGMENT_SIZE_RX + 2);
- if (unlikely(skb == NULL)) {
- /* error allocating an sk_buff structure elements */
- DEBUG(SHOW_ERROR_MESSAGES, "Error allocating skb\n");
- break;
- }
- skb_reserve(skb, (4 - (long) skb->data) & 0x03);
- /* store the new skb structure pointer */
- index = index % ISL38XX_CB_RX_QSIZE;
- priv->data_low_rx[index] = skb;
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
- DEBUG(SHOW_TRACING,
- "new alloc skb %p skb->data %p skb->len %u index %u truesize %u\n",
- skb, skb->data, skb->len, index, skb->truesize);
-#endif
-
- /* set the streaming DMA mapping for proper PCI bus operation */
- priv->pci_map_rx_address[index] =
- dma_map_single(&priv->pdev->dev, (void *)skb->data,
- MAX_FRAGMENT_SIZE_RX + 2, DMA_FROM_DEVICE);
- if (dma_mapping_error(&priv->pdev->dev, priv->pci_map_rx_address[index])) {
- /* error mapping the buffer to device accessible memory address */
- DEBUG(SHOW_ERROR_MESSAGES,
- "Error mapping DMA address\n");
-
- /* free the skbuf structure before aborting */
- dev_kfree_skb_irq(skb);
- skb = NULL;
- break;
- }
- /* update the fragment address */
- control_block->rx_data_low[index].address =
- cpu_to_le32((u32)priv->pci_map_rx_address[index]);
- wmb();
-
- /* increment the driver read pointer */
- le32_add_cpu(&control_block->
- driver_curr_frag[ISL38XX_CB_RX_DATA_LQ], 1);
- }
-
- /* trigger the device */
- islpci_trigger(priv);
-
- return 0;
-}
-
-void
-islpci_do_reset_and_wake(struct work_struct *work)
-{
- islpci_private *priv = container_of(work, islpci_private, reset_task);
-
- islpci_reset(priv, 1);
- priv->reset_task_pending = 0;
- smp_wmb();
- netif_wake_queue(priv->ndev);
-}
-
-void
-islpci_eth_tx_timeout(struct net_device *ndev, unsigned int txqueue)
-{
- islpci_private *priv = netdev_priv(ndev);
-
- /* increment the transmit error counter */
- ndev->stats.tx_errors++;
-
- if (!priv->reset_task_pending) {
- printk(KERN_WARNING
- "%s: tx_timeout, scheduling reset", ndev->name);
- netif_stop_queue(ndev);
- priv->reset_task_pending = 1;
- schedule_work(&priv->reset_task);
- } else {
- printk(KERN_WARNING
- "%s: tx_timeout, waiting for reset", ndev->name);
- }
-}
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-18 06:48:47 +0300