diff options
Diffstat (limited to 'drivers/net/wireless/intel/iwlwifi/pcie/drv.c')
| -rw-r--r-- | drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 203 |
1 files changed, 200 insertions, 3 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c index 00335ea6b3eb..05b968506836 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c @@ -7,6 +7,7 @@ * * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved. * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH + * Copyright(c) 2016 Intel Deutschland GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -66,6 +67,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/module.h> +#include <linux/pm_runtime.h> #include <linux/pci.h> #include <linux/pci-aspm.h> #include <linux/acpi.h> @@ -627,6 +629,33 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (ret) goto out_free_drv; + /* if RTPM is in use, enable it in our device */ + if (iwl_trans->runtime_pm_mode != IWL_PLAT_PM_MODE_DISABLED) { + /* We explicitly set the device to active here to + * clear contingent errors. + */ + pm_runtime_set_active(&pdev->dev); + + pm_runtime_set_autosuspend_delay(&pdev->dev, + iwlwifi_mod_params.d0i3_entry_delay); + pm_runtime_use_autosuspend(&pdev->dev); + + /* We are not supposed to call pm_runtime_allow() by + * ourselves, but let userspace enable runtime PM via + * sysfs. However, since we don't enable this from + * userspace yet, we need to allow/forbid() ourselves. + */ + pm_runtime_allow(&pdev->dev); + } + + /* The PCI device starts with a reference taken and we are + * supposed to release it here. But to simplify the + * interaction with the opmode, we don't do it now, but let + * the opmode release it when it's ready. To account for this + * reference, we start with ref_count set to 1. + */ + trans_pcie->ref_count = 1; + return 0; out_free_drv: @@ -641,7 +670,17 @@ static void iwl_pci_remove(struct pci_dev *pdev) struct iwl_trans *trans = pci_get_drvdata(pdev); struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); + /* if RTPM was in use, restore it to the state before probe */ + if (trans->runtime_pm_mode != IWL_PLAT_PM_MODE_DISABLED) { + /* We should not call forbid here, but we do for now. + * Check the comment to pm_runtime_allow() in + * iwl_pci_probe(). + */ + pm_runtime_forbid(trans->dev); + } + iwl_drv_stop(trans_pcie->drv); + iwl_trans_pcie_free(trans); } @@ -693,15 +732,173 @@ static int iwl_pci_resume(struct device *device) return 0; } -static SIMPLE_DEV_PM_OPS(iwl_dev_pm_ops, iwl_pci_suspend, iwl_pci_resume); +int iwl_pci_fw_enter_d0i3(struct iwl_trans *trans) +{ + struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); + int ret; + + if (test_bit(STATUS_FW_ERROR, &trans->status)) + return 0; + + set_bit(STATUS_TRANS_GOING_IDLE, &trans->status); + + /* config the fw */ + ret = iwl_op_mode_enter_d0i3(trans->op_mode); + if (ret == 1) { + IWL_DEBUG_RPM(trans, "aborting d0i3 entrance\n"); + clear_bit(STATUS_TRANS_GOING_IDLE, &trans->status); + return -EBUSY; + } + if (ret) + goto err; + + ret = wait_event_timeout(trans_pcie->d0i3_waitq, + test_bit(STATUS_TRANS_IDLE, &trans->status), + msecs_to_jiffies(IWL_TRANS_IDLE_TIMEOUT)); + if (!ret) { + IWL_ERR(trans, "Timeout entering D0i3\n"); + ret = -ETIMEDOUT; + goto err; + } + + clear_bit(STATUS_TRANS_GOING_IDLE, &trans->status); + + return 0; +err: + clear_bit(STATUS_TRANS_GOING_IDLE, &trans->status); + iwl_trans_fw_error(trans); + return ret; +} + +int iwl_pci_fw_exit_d0i3(struct iwl_trans *trans) +{ + struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); + int ret; + + /* sometimes a D0i3 entry is not followed through */ + if (!test_bit(STATUS_TRANS_IDLE, &trans->status)) + return 0; + + /* config the fw */ + ret = iwl_op_mode_exit_d0i3(trans->op_mode); + if (ret) + goto err; + + /* we clear STATUS_TRANS_IDLE only when D0I3_END command is completed */ + + ret = wait_event_timeout(trans_pcie->d0i3_waitq, + !test_bit(STATUS_TRANS_IDLE, &trans->status), + msecs_to_jiffies(IWL_TRANS_IDLE_TIMEOUT)); + if (!ret) { + IWL_ERR(trans, "Timeout exiting D0i3\n"); + ret = -ETIMEDOUT; + goto err; + } + + return 0; +err: + clear_bit(STATUS_TRANS_IDLE, &trans->status); + iwl_trans_fw_error(trans); + return ret; +} + +#ifdef CONFIG_IWLWIFI_PCIE_RTPM +static int iwl_pci_runtime_suspend(struct device *device) +{ + struct pci_dev *pdev = to_pci_dev(device); + struct iwl_trans *trans = pci_get_drvdata(pdev); + int ret; + + IWL_DEBUG_RPM(trans, "entering runtime suspend\n"); + + if (test_bit(STATUS_DEVICE_ENABLED, &trans->status)) { + ret = iwl_pci_fw_enter_d0i3(trans); + if (ret < 0) + return ret; + } + + trans->system_pm_mode = IWL_PLAT_PM_MODE_D0I3; + + iwl_trans_d3_suspend(trans, false, false); + + return 0; +} + +static int iwl_pci_runtime_resume(struct device *device) +{ + struct pci_dev *pdev = to_pci_dev(device); + struct iwl_trans *trans = pci_get_drvdata(pdev); + enum iwl_d3_status d3_status; + + IWL_DEBUG_RPM(trans, "exiting runtime suspend (resume)\n"); + + iwl_trans_d3_resume(trans, &d3_status, false, false); + + if (test_bit(STATUS_DEVICE_ENABLED, &trans->status)) + return iwl_pci_fw_exit_d0i3(trans); + + return 0; +} + +static int iwl_pci_system_prepare(struct device *device) +{ + struct pci_dev *pdev = to_pci_dev(device); + struct iwl_trans *trans = pci_get_drvdata(pdev); + + IWL_DEBUG_RPM(trans, "preparing for system suspend\n"); + + /* This is called before entering system suspend and before + * the runtime resume is called. Set the suspending flag to + * prevent the wakelock from being taken. + */ + trans->suspending = true; + + /* Wake the device up from runtime suspend before going to + * platform suspend. This is needed because we don't know + * whether wowlan any is set and, if it's not, mac80211 will + * disconnect (in which case, we can't be in D0i3). + */ + pm_runtime_resume(device); + + return 0; +} + +static void iwl_pci_system_complete(struct device *device) +{ + struct pci_dev *pdev = to_pci_dev(device); + struct iwl_trans *trans = pci_get_drvdata(pdev); + + IWL_DEBUG_RPM(trans, "completing system suspend\n"); + + /* This is called as a counterpart to the prepare op. It is + * called either when suspending fails or when suspend + * completed successfully. Now there's no risk of grabbing + * the wakelock anymore, so we can release the suspending + * flag. + */ + trans->suspending = false; +} +#endif /* CONFIG_IWLWIFI_PCIE_RTPM */ + +static const struct dev_pm_ops iwl_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(iwl_pci_suspend, + iwl_pci_resume) +#ifdef CONFIG_IWLWIFI_PCIE_RTPM + SET_RUNTIME_PM_OPS(iwl_pci_runtime_suspend, + iwl_pci_runtime_resume, + NULL) + .prepare = iwl_pci_system_prepare, + .complete = iwl_pci_system_complete, +#endif /* CONFIG_IWLWIFI_PCIE_RTPM */ +}; #define IWL_PM_OPS (&iwl_dev_pm_ops) -#else +#else /* CONFIG_PM_SLEEP */ #define IWL_PM_OPS NULL -#endif +#endif /* CONFIG_PM_SLEEP */ static struct pci_driver iwl_pci_driver = { .name = DRV_NAME, |