diff options
Diffstat (limited to 'drivers/net/wireless/brcm80211/brcmfmac/sdio.c')
-rw-r--r-- | drivers/net/wireless/brcm80211/brcmfmac/sdio.c | 178 |
1 files changed, 83 insertions, 95 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c index 0b0d51a61060..faec35c899ec 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c @@ -44,7 +44,8 @@ #include "chip.h" #include "firmware.h" -#define DCMD_RESP_TIMEOUT 2000 /* In milli second */ +#define DCMD_RESP_TIMEOUT 2000 /* In milli second */ +#define CTL_DONE_TIMEOUT 2000 /* In milli second */ #ifdef DEBUG @@ -495,9 +496,9 @@ struct brcmf_sdio { u8 *ctrl_frame_buf; u16 ctrl_frame_len; bool ctrl_frame_stat; + int ctrl_frame_err; spinlock_t txq_lock; /* protect bus->txq */ - struct semaphore tx_seq_lock; /* protect bus->tx_seq */ wait_queue_head_t ctrl_wait; wait_queue_head_t dcmd_resp_wait; @@ -514,7 +515,6 @@ struct brcmf_sdio { bool txoff; /* Transmit flow-controlled */ struct brcmf_sdio_count sdcnt; bool sr_enabled; /* SaveRestore enabled */ - bool sleeping; /* SDIO bus sleeping */ u8 tx_hdrlen; /* sdio bus header length for tx packet */ bool txglom; /* host tx glomming enable flag */ @@ -608,6 +608,8 @@ static const struct sdiod_drive_str sdiod_drvstr_tab2_3v3[] = { #define BCM4330_NVRAM_NAME "brcm/brcmfmac4330-sdio.txt" #define BCM4334_FIRMWARE_NAME "brcm/brcmfmac4334-sdio.bin" #define BCM4334_NVRAM_NAME "brcm/brcmfmac4334-sdio.txt" +#define BCM43340_FIRMWARE_NAME "brcm/brcmfmac43340-sdio.bin" +#define BCM43340_NVRAM_NAME "brcm/brcmfmac43340-sdio.txt" #define BCM4335_FIRMWARE_NAME "brcm/brcmfmac4335-sdio.bin" #define BCM4335_NVRAM_NAME "brcm/brcmfmac4335-sdio.txt" #define BCM43362_FIRMWARE_NAME "brcm/brcmfmac43362-sdio.bin" @@ -629,6 +631,8 @@ MODULE_FIRMWARE(BCM4330_FIRMWARE_NAME); MODULE_FIRMWARE(BCM4330_NVRAM_NAME); MODULE_FIRMWARE(BCM4334_FIRMWARE_NAME); MODULE_FIRMWARE(BCM4334_NVRAM_NAME); +MODULE_FIRMWARE(BCM43340_FIRMWARE_NAME); +MODULE_FIRMWARE(BCM43340_NVRAM_NAME); MODULE_FIRMWARE(BCM4335_FIRMWARE_NAME); MODULE_FIRMWARE(BCM4335_NVRAM_NAME); MODULE_FIRMWARE(BCM43362_FIRMWARE_NAME); @@ -660,6 +664,7 @@ static const struct brcmf_firmware_names brcmf_fwname_data[] = { { BRCM_CC_4329_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4329) }, { BRCM_CC_4330_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4330) }, { BRCM_CC_4334_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4334) }, + { BRCM_CC_43340_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM43340) }, { BRCM_CC_4335_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4335) }, { BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, BRCMF_FIRMWARE_NVRAM(BCM43362) }, { BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) }, @@ -1008,12 +1013,12 @@ brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok) brcmf_dbg(SDIO, "Enter: request %s currently %s\n", (sleep ? "SLEEP" : "WAKE"), - (bus->sleeping ? "SLEEP" : "WAKE")); + (bus->sdiodev->sleeping ? "SLEEP" : "WAKE")); /* If SR is enabled control bus state with KSO */ if (bus->sr_enabled) { /* Done if we're already in the requested state */ - if (sleep == bus->sleeping) + if (sleep == bus->sdiodev->sleeping) goto end; /* Going to sleep */ @@ -1045,12 +1050,7 @@ brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok) bus->idlecount = 0; err = brcmf_sdio_kso_control(bus, true); } - if (!err) { - /* Change state */ - bus->sleeping = sleep; - brcmf_dbg(SDIO, "new state %s\n", - (sleep ? "SLEEP" : "WAKE")); - } else { + if (err) { brcmf_err("error while changing bus sleep state %d\n", err); goto done; @@ -1065,6 +1065,11 @@ end: } else { brcmf_sdio_clkctl(bus, CLK_AVAIL, pendok); } + bus->sdiodev->sleeping = sleep; + if (sleep) + wake_up(&bus->sdiodev->idle_wait); + brcmf_dbg(SDIO, "new state %s\n", + (sleep ? "SLEEP" : "WAKE")); done: brcmf_dbg(SDIO, "Exit: err=%d\n", err); return err; @@ -1904,7 +1909,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) bus->rxpending = true; for (rd->seq_num = bus->rx_seq, rxleft = maxframes; - !bus->rxskip && rxleft && brcmf_bus_ready(bus->sdiodev->bus_if); + !bus->rxskip && rxleft && bus->sdiodev->state == BRCMF_STATE_DATA; rd->seq_num++, rxleft--) { /* Handle glomming separately */ @@ -2371,8 +2376,6 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes) /* Send frames until the limit or some other event */ for (cnt = 0; (cnt < maxframes) && data_ok(bus);) { pkt_num = 1; - if (down_interruptible(&bus->tx_seq_lock)) - return cnt; if (bus->txglom) pkt_num = min_t(u8, bus->tx_max - bus->tx_seq, bus->sdiodev->txglomsz); @@ -2388,13 +2391,10 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes) __skb_queue_tail(&pktq, pkt); } spin_unlock_bh(&bus->txq_lock); - if (i == 0) { - up(&bus->tx_seq_lock); + if (i == 0) break; - } ret = brcmf_sdio_txpkt(bus, &pktq, SDPCM_DATA_CHANNEL); - up(&bus->tx_seq_lock); cnt += i; @@ -2415,7 +2415,7 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes) } /* Deflow-control stack if needed */ - if ((bus->sdiodev->bus_if->state == BRCMF_BUS_DATA) && + if ((bus->sdiodev->state == BRCMF_STATE_DATA) && bus->txoff && (pktq_len(&bus->txq) < TXLOW)) { bus->txoff = false; brcmf_txflowblock(bus->sdiodev->dev, false); @@ -2503,7 +2503,7 @@ static void brcmf_sdio_bus_stop(struct device *dev) bus->watchdog_tsk = NULL; } - if (bus_if->state == BRCMF_BUS_DOWN) { + if (sdiodev->state != BRCMF_STATE_NOMEDIUM) { sdio_claim_host(sdiodev->func[1]); /* Enable clock for device interrupts */ @@ -2538,8 +2538,7 @@ static void brcmf_sdio_bus_stop(struct device *dev) brcmu_pktq_flush(&bus->txq, true, NULL, NULL); /* Clear any held glomming stuff */ - if (bus->glomd) - brcmu_pkt_buf_free_skb(bus->glomd); + brcmu_pkt_buf_free_skb(bus->glomd); brcmf_sdio_free_glom(bus); /* Clear rx control and wake any waiters */ @@ -2604,6 +2603,21 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus) return ret; } +static int brcmf_sdio_pm_resume_wait(struct brcmf_sdio_dev *sdiodev) +{ +#ifdef CONFIG_PM_SLEEP + int retry; + + /* Wait for possible resume to complete */ + retry = 0; + while ((atomic_read(&sdiodev->suspend)) && (retry++ != 50)) + msleep(20); + if (atomic_read(&sdiodev->suspend)) + return -EIO; +#endif + return 0; +} + static void brcmf_sdio_dpc(struct brcmf_sdio *bus) { u32 newstatus = 0; @@ -2614,6 +2628,9 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus) brcmf_dbg(TRACE, "Enter\n"); + if (brcmf_sdio_pm_resume_wait(bus->sdiodev)) + return; + sdio_claim_host(bus->sdiodev->func[1]); /* If waiting for HTAVAIL, check status */ @@ -2720,17 +2737,14 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus) brcmf_sdio_clrintr(bus); if (bus->ctrl_frame_stat && (bus->clkstate == CLK_AVAIL) && - (down_interruptible(&bus->tx_seq_lock) == 0)) { - if (data_ok(bus)) { - sdio_claim_host(bus->sdiodev->func[1]); - err = brcmf_sdio_tx_ctrlframe(bus, bus->ctrl_frame_buf, - bus->ctrl_frame_len); - sdio_release_host(bus->sdiodev->func[1]); - - bus->ctrl_frame_stat = false; - brcmf_sdio_wait_event_wakeup(bus); - } - up(&bus->tx_seq_lock); + data_ok(bus)) { + sdio_claim_host(bus->sdiodev->func[1]); + err = brcmf_sdio_tx_ctrlframe(bus, bus->ctrl_frame_buf, + bus->ctrl_frame_len); + sdio_release_host(bus->sdiodev->func[1]); + bus->ctrl_frame_err = err; + bus->ctrl_frame_stat = false; + brcmf_sdio_wait_event_wakeup(bus); } /* Send queued frames (limit 1 if rx may still be pending) */ if ((bus->clkstate == CLK_AVAIL) && !atomic_read(&bus->fcstate) && @@ -2741,7 +2755,7 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus) brcmf_sdio_sendfromq(bus, framecnt); } - if (!brcmf_bus_ready(bus->sdiodev->bus_if) || (err != 0)) { + if ((bus->sdiodev->state != BRCMF_STATE_DATA) || (err != 0)) { brcmf_err("failed backplane access over SDIO, halting operation\n"); atomic_set(&bus->intstatus, 0); } else if (atomic_read(&bus->intstatus) || @@ -2942,43 +2956,30 @@ brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; struct brcmf_sdio *bus = sdiodev->bus; - int ret = -1; + int ret; brcmf_dbg(TRACE, "Enter\n"); - if (down_interruptible(&bus->tx_seq_lock)) - return -EINTR; - - if (!data_ok(bus)) { - brcmf_dbg(INFO, "No bus credit bus->tx_max %d, bus->tx_seq %d\n", - bus->tx_max, bus->tx_seq); - up(&bus->tx_seq_lock); - /* Send from dpc */ - bus->ctrl_frame_buf = msg; - bus->ctrl_frame_len = msglen; - bus->ctrl_frame_stat = true; - - wait_event_interruptible_timeout(bus->ctrl_wait, - !bus->ctrl_frame_stat, - msecs_to_jiffies(2000)); - - if (!bus->ctrl_frame_stat) { - brcmf_dbg(SDIO, "ctrl_frame_stat == false\n"); - ret = 0; - } else { - brcmf_dbg(SDIO, "ctrl_frame_stat == true\n"); - bus->ctrl_frame_stat = false; - if (down_interruptible(&bus->tx_seq_lock)) - return -EINTR; - ret = -1; - } + /* Send from dpc */ + bus->ctrl_frame_buf = msg; + bus->ctrl_frame_len = msglen; + bus->ctrl_frame_stat = true; + if (atomic_read(&bus->dpc_tskcnt) == 0) { + atomic_inc(&bus->dpc_tskcnt); + queue_work(bus->brcmf_wq, &bus->datawork); } - if (ret == -1) { - sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdio_bus_sleep(bus, false, false); - ret = brcmf_sdio_tx_ctrlframe(bus, msg, msglen); - sdio_release_host(bus->sdiodev->func[1]); - up(&bus->tx_seq_lock); + + wait_event_interruptible_timeout(bus->ctrl_wait, !bus->ctrl_frame_stat, + msecs_to_jiffies(CTL_DONE_TIMEOUT)); + + if (!bus->ctrl_frame_stat) { + brcmf_dbg(SDIO, "ctrl_frame complete, err=%d\n", + bus->ctrl_frame_err); + ret = bus->ctrl_frame_err; + } else { + brcmf_dbg(SDIO, "ctrl_frame timeout\n"); + bus->ctrl_frame_stat = false; + ret = -ETIMEDOUT; } if (ret) @@ -2986,7 +2987,7 @@ brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) else bus->sdcnt.tx_ctlpkts++; - return ret ? -EIO : 0; + return ret; } #ifdef DEBUG @@ -3409,8 +3410,8 @@ static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus, goto err; } - /* Allow HT Clock now that the ARM is running. */ - brcmf_bus_change_state(bus->sdiodev->bus_if, BRCMF_BUS_LOAD); + /* Allow full data communication using DPC from now on. */ + bus->sdiodev->state = BRCMF_STATE_DATA; bcmerror = 0; err: @@ -3556,7 +3557,7 @@ void brcmf_sdio_isr(struct brcmf_sdio *bus) return; } - if (!brcmf_bus_ready(bus->sdiodev->bus_if)) { + if (bus->sdiodev->state != BRCMF_STATE_DATA) { brcmf_err("bus is down. we have nothing to do\n"); return; } @@ -3579,10 +3580,6 @@ void brcmf_sdio_isr(struct brcmf_sdio *bus) static bool brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus) { -#ifdef DEBUG - struct brcmf_bus *bus_if = dev_get_drvdata(bus->sdiodev->dev); -#endif /* DEBUG */ - brcmf_dbg(TIMER, "Enter\n"); /* Poll period: check device if appropriate. */ @@ -3626,7 +3623,7 @@ static bool brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus) } #ifdef DEBUG /* Poll for console output periodically */ - if (bus_if && bus_if->state == BRCMF_BUS_DATA && + if (bus->sdiodev->state == BRCMF_STATE_DATA && bus->console_interval != 0) { bus->console.count += BRCMF_WD_POLL_MS; if (bus->console.count >= bus->console_interval) { @@ -3811,7 +3808,7 @@ static u32 brcmf_sdio_buscore_read32(void *ctx, u32 addr) u32 val, rev; val = brcmf_sdiod_regrl(sdiodev, addr, NULL); - if (sdiodev->func[0]->device == BRCM_SDIO_4335_4339_DEVICE_ID && + if (sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339 && addr == CORE_CC_REG(SI_ENUM_BASE, chipid)) { rev = (val & CID_REV_MASK) >> CID_REV_SHIFT; if (rev >= 2) { @@ -3867,11 +3864,6 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus) goto fail; } - /* SDIO register access works so moving - * state from UNKNOWN to DOWN. - */ - brcmf_bus_change_state(bus->sdiodev->bus_if, BRCMF_BUS_DOWN); - bus->ci = brcmf_chip_attach(bus->sdiodev, &brcmf_sdio_buscore_ops); if (IS_ERR(bus->ci)) { brcmf_err("brcmf_chip_attach failed!\n"); @@ -4005,18 +3997,16 @@ static void brcmf_sdio_firmware_callback(struct device *dev, brcmf_dbg(TRACE, "Enter: dev=%s\n", dev_name(dev)); - /* try to download image and nvram to the dongle */ - if (bus_if->state == BRCMF_BUS_DOWN) { - bus->alp_only = true; - err = brcmf_sdio_download_firmware(bus, code, nvram, nvram_len); - if (err) - goto fail; - bus->alp_only = false; - } - if (!bus_if->drvr) return; + /* try to download image and nvram to the dongle */ + bus->alp_only = true; + err = brcmf_sdio_download_firmware(bus, code, nvram, nvram_len); + if (err) + goto fail; + bus->alp_only = false; + /* Start the watchdog timer */ bus->sdcnt.tickcnt = 0; brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS); @@ -4142,7 +4132,6 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev) spin_lock_init(&bus->rxctl_lock); spin_lock_init(&bus->txq_lock); - sema_init(&bus->tx_seq_lock, 1); init_waitqueue_head(&bus->ctrl_wait); init_waitqueue_head(&bus->dcmd_resp_wait); @@ -4213,7 +4202,6 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev) bus->idleclock = BRCMF_IDLE_ACTIVE; /* SR state */ - bus->sleeping = false; bus->sr_enabled = false; brcmf_sdio_debugfs_create(bus); @@ -4254,7 +4242,7 @@ void brcmf_sdio_remove(struct brcmf_sdio *bus) destroy_workqueue(bus->brcmf_wq); if (bus->ci) { - if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) { + if (bus->sdiodev->state != BRCMF_STATE_NOMEDIUM) { sdio_claim_host(bus->sdiodev->func[1]); brcmf_sdio_clkctl(bus, CLK_AVAIL, false); /* Leave the device in state where it is @@ -4289,7 +4277,7 @@ void brcmf_sdio_wd_timer(struct brcmf_sdio *bus, uint wdtick) } /* don't start the wd until fw is loaded */ - if (bus->sdiodev->bus_if->state != BRCMF_BUS_DATA) + if (bus->sdiodev->state != BRCMF_STATE_DATA) return; if (wdtick) { |