diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/wmi.h')
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/wmi.h | 100 |
1 files changed, 96 insertions, 4 deletions
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index 36220258e3c7..f7badd079051 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -203,6 +203,8 @@ enum wmi_service { WMI_SERVICE_TPC_STATS_FINAL, WMI_SERVICE_RESET_CHIP, WMI_SERVICE_SPOOF_MAC_SUPPORT, + WMI_SERVICE_TX_DATA_ACK_RSSI, + WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, /* keep last */ WMI_SERVICE_MAX, @@ -350,6 +352,13 @@ enum wmi_10_4_service { WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT, WMI_10_4_SERVICE_TPC_STATS_FINAL, + WMI_10_4_SERVICE_CFR_CAPTURE_SUPPORT, + WMI_10_4_SERVICE_TX_DATA_ACK_RSSI, + WMI_10_4_SERVICE_CFR_CAPTURE_IND_MSG_TYPE_LEGACY, + WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT, + WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT, + WMI_10_4_SERVICE_VDEV_BCN_RATE_CONTROL, + WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, }; static inline char *wmi_service_name(int service_id) @@ -463,6 +472,8 @@ static inline char *wmi_service_name(int service_id) SVCSTR(WMI_SERVICE_HOST_DFS_CHECK_SUPPORT); SVCSTR(WMI_SERVICE_TPC_STATS_FINAL); SVCSTR(WMI_SERVICE_RESET_CHIP); + SVCSTR(WMI_SERVICE_TX_DATA_ACK_RSSI); + SVCSTR(WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT); default: return NULL; } @@ -771,6 +782,10 @@ static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out, WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, len); SVCMAP(WMI_10_4_SERVICE_TPC_STATS_FINAL, WMI_SERVICE_TPC_STATS_FINAL, len); + SVCMAP(WMI_10_4_SERVICE_TX_DATA_ACK_RSSI, + WMI_SERVICE_TX_DATA_ACK_RSSI, len); + SVCMAP(WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, + WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, len); } #undef SVCMAP @@ -2924,6 +2939,7 @@ enum wmi_coex_version { * @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host * enable/disable * @WMI_10_4_TDLS_EXPLICIT_MODE_ONLY:Explicit TDLS mode enable/disable + * @WMI_10_4_TX_DATA_ACK_RSSI: Enable DATA ACK RSSI if firmware is capable */ enum wmi_10_4_feature_mask { WMI_10_4_LTEU_SUPPORT = BIT(0), @@ -2939,6 +2955,7 @@ enum wmi_10_4_feature_mask { WMI_10_4_TDLS_UAPSD_SLEEP_STA = BIT(10), WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE = BIT(11), WMI_10_4_TDLS_EXPLICIT_MODE_ONLY = BIT(12), + WMI_10_4_TX_DATA_ACK_RSSI = BIT(16), }; @@ -4153,6 +4170,13 @@ enum wmi_tpc_pream_5ghz { WMI_TPC_PREAM_5GHZ_HTCUP, }; +#define WMI_PEER_PS_STATE_DISABLED 2 + +struct wmi_peer_sta_ps_state_chg_event { + struct wmi_mac_addr peer_macaddr; + __le32 peer_ps_state; +} __packed; + struct wmi_pdev_chanlist_update_event { /* number of channels */ __le32 num_chan; @@ -4958,10 +4982,15 @@ enum wmi_rate_preamble { #define ATH10K_HW_GI(flags) (((flags) >> 5) & 0x1) #define ATH10K_HW_RATECODE(rate, nss, preamble) \ (((preamble) << 6) | ((nss) << 4) | (rate)) +#define ATH10K_HW_AMPDU(flags) ((flags) & 0x1) +#define ATH10K_HW_BA_FAIL(flags) (((flags) >> 1) & 0x3) -#define VHT_MCS_NUM 10 -#define VHT_BW_NUM 4 -#define VHT_NSS_NUM 4 +#define ATH10K_VHT_MCS_NUM 10 +#define ATH10K_BW_NUM 4 +#define ATH10K_NSS_NUM 4 +#define ATH10K_LEGACY_NUM 12 +#define ATH10K_GI_NUM 2 +#define ATH10K_HT_MCS_NUM 32 /* Value to disable fixed rate setting */ #define WMI_FIXED_RATE_NONE (0xff) @@ -6642,11 +6671,17 @@ struct wmi_ch_info_ev_arg { __le32 rx_frame_count; }; +/* From 10.4 firmware, not sure all have the same values. */ +enum wmi_vdev_start_status { + WMI_VDEV_START_OK = 0, + WMI_VDEV_START_CHAN_INVALID, +}; + struct wmi_vdev_start_ev_arg { __le32 vdev_id; __le32 req_id; __le32 resp_type; /* %WMI_VDEV_RESP_ */ - __le32 status; + __le32 status; /* See wmi_vdev_start_status enum above */ }; struct wmi_peer_kick_ev_arg { @@ -7033,6 +7068,63 @@ struct wmi_pdev_set_adaptive_cca_params { __le32 cca_detect_margin; } __packed; +#define WMI_PNO_MAX_SCHED_SCAN_PLANS 2 +#define WMI_PNO_MAX_SCHED_SCAN_PLAN_INT 7200 +#define WMI_PNO_MAX_SCHED_SCAN_PLAN_ITRNS 100 +#define WMI_PNO_MAX_NETW_CHANNELS 26 +#define WMI_PNO_MAX_NETW_CHANNELS_EX 60 +#define WMI_PNO_MAX_SUPP_NETWORKS WLAN_SCAN_PARAMS_MAX_SSID +#define WMI_PNO_MAX_IE_LENGTH WLAN_SCAN_PARAMS_MAX_IE_LEN + +/*size based of dot11 declaration without extra IEs as we will not carry those for PNO*/ +#define WMI_PNO_MAX_PB_REQ_SIZE 450 + +#define WMI_PNO_24G_DEFAULT_CH 1 +#define WMI_PNO_5G_DEFAULT_CH 36 + +#define WMI_ACTIVE_MAX_CHANNEL_TIME 40 +#define WMI_PASSIVE_MAX_CHANNEL_TIME 110 + +/* SSID broadcast type */ +enum wmi_SSID_bcast_type { + BCAST_UNKNOWN = 0, + BCAST_NORMAL = 1, + BCAST_HIDDEN = 2, +}; + +struct wmi_network_type { + struct wmi_ssid ssid; + u32 authentication; + u32 encryption; + u32 bcast_nw_type; + u8 channel_count; + u16 channels[WMI_PNO_MAX_NETW_CHANNELS_EX]; + s32 rssi_threshold; +} __packed; + +struct wmi_pno_scan_req { + u8 enable; + u8 vdev_id; + u8 uc_networks_count; + struct wmi_network_type a_networks[WMI_PNO_MAX_SUPP_NETWORKS]; + u32 fast_scan_period; + u32 slow_scan_period; + u8 fast_scan_max_cycles; + + bool do_passive_scan; + + u32 delay_start_time; + u32 active_min_time; + u32 active_max_time; + u32 passive_min_time; + u32 passive_max_time; + + /* mac address randomization attributes */ + u32 enable_pno_scan_randomization; + u8 mac_addr[ETH_ALEN]; + u8 mac_addr_mask[ETH_ALEN]; +} __packed; + enum wmi_host_platform_type { WMI_HOST_PLATFORM_HIGH_PERF, WMI_HOST_PLATFORM_LOW_PERF, |