1 files changed, 293 insertions, 41 deletions

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index f23d61fda243..ce9ef3499ecb 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -92,7 +92,7 @@ static int ath10k_install_key(struct ath10k_vif *arvif,
 
 	lockdep_assert_held(&ar->conf_mutex);
 
-	INIT_COMPLETION(ar->install_key_done);
+	reinit_completion(&ar->install_key_done);
 
 	ret = ath10k_send_key(arvif, key, cmd, macaddr);
 	if (ret)
@@ -322,12 +322,16 @@ static int ath10k_peer_create(struct ath10k *ar, u32 vdev_id, const u8 *addr)
 	lockdep_assert_held(&ar->conf_mutex);
 
 	ret = ath10k_wmi_peer_create(ar, vdev_id, addr);
-	if (ret)
+	if (ret) {
+		ath10k_warn("Failed to create wmi peer: %i\n", ret);
 		return ret;
+	}
 
 	ret = ath10k_wait_for_peer_created(ar, vdev_id, addr);
-	if (ret)
+	if (ret) {
+		ath10k_warn("Failed to wait for created wmi peer: %i\n", ret);
 		return ret;
+	}
 
 	return 0;
 }
@@ -438,7 +442,7 @@ static int ath10k_vdev_start(struct ath10k_vif *arvif)
 
 	lockdep_assert_held(&ar->conf_mutex);
 
-	INIT_COMPLETION(ar->vdev_setup_done);
+	reinit_completion(&ar->vdev_setup_done);
 
 	arg.vdev_id = arvif->vdev_id;
 	arg.dtim_period = arvif->dtim_period;
@@ -450,15 +454,19 @@ static int ath10k_vdev_start(struct ath10k_vif *arvif)
 
 	arg.channel.mode = chan_to_phymode(&conf->chandef);
 
-	arg.channel.min_power = channel->max_power * 3;
-	arg.channel.max_power = channel->max_power * 4;
-	arg.channel.max_reg_power = channel->max_reg_power * 4;
-	arg.channel.max_antenna_gain = channel->max_antenna_gain;
+	arg.channel.min_power = 0;
+	arg.channel.max_power = channel->max_power * 2;
+	arg.channel.max_reg_power = channel->max_reg_power * 2;
+	arg.channel.max_antenna_gain = channel->max_antenna_gain * 2;
 
 	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
 		arg.ssid = arvif->u.ap.ssid;
 		arg.ssid_len = arvif->u.ap.ssid_len;
 		arg.hidden_ssid = arvif->u.ap.hidden_ssid;
+
+		/* For now allow DFS for AP mode */
+		arg.channel.chan_radar =
+			!!(channel->flags & IEEE80211_CHAN_RADAR);
 	} else if (arvif->vdev_type == WMI_VDEV_TYPE_IBSS) {
 		arg.ssid = arvif->vif->bss_conf.ssid;
 		arg.ssid_len = arvif->vif->bss_conf.ssid_len;
@@ -491,7 +499,7 @@ static int ath10k_vdev_stop(struct ath10k_vif *arvif)
 
 	lockdep_assert_held(&ar->conf_mutex);
 
-	INIT_COMPLETION(ar->vdev_setup_done);
+	reinit_completion(&ar->vdev_setup_done);
 
 	ret = ath10k_wmi_vdev_stop(ar, arvif->vdev_id);
 	if (ret) {
@@ -516,6 +524,11 @@ static int ath10k_monitor_start(struct ath10k *ar, int vdev_id)
 
 	lockdep_assert_held(&ar->conf_mutex);
 
+	if (!ar->monitor_present) {
+		ath10k_warn("mac montor stop -- monitor is not present\n");
+		return -EINVAL;
+	}
+
 	arg.vdev_id = vdev_id;
 	arg.channel.freq = channel->center_freq;
 	arg.channel.band_center_freq1 = ar->hw->conf.chandef.center_freq1;
@@ -523,11 +536,13 @@ static int ath10k_monitor_start(struct ath10k *ar, int vdev_id)
 	/* TODO setup this dynamically, what in case we
 	   don't have any vifs? */
 	arg.channel.mode = chan_to_phymode(&ar->hw->conf.chandef);
+	arg.channel.chan_radar =
+			!!(channel->flags & IEEE80211_CHAN_RADAR);
 
-	arg.channel.min_power = channel->max_power * 3;
-	arg.channel.max_power = channel->max_power * 4;
-	arg.channel.max_reg_power = channel->max_reg_power * 4;
-	arg.channel.max_antenna_gain = channel->max_antenna_gain;
+	arg.channel.min_power = 0;
+	arg.channel.max_power = channel->max_power * 2;
+	arg.channel.max_reg_power = channel->max_reg_power * 2;
+	arg.channel.max_antenna_gain = channel->max_antenna_gain * 2;
 
 	ret = ath10k_wmi_vdev_start(ar, &arg);
 	if (ret) {
@@ -566,6 +581,16 @@ static int ath10k_monitor_stop(struct ath10k *ar)
 
 	lockdep_assert_held(&ar->conf_mutex);
 
+	if (!ar->monitor_present) {
+		ath10k_warn("mac montor stop -- monitor is not present\n");
+		return -EINVAL;
+	}
+
+	if (!ar->monitor_enabled) {
+		ath10k_warn("mac montor stop -- monitor is not enabled\n");
+		return -EINVAL;
+	}
+
 	ret = ath10k_wmi_vdev_down(ar, ar->monitor_vdev_id);
 	if (ret)
 		ath10k_warn("Monitor vdev down failed: %d\n", ret);
@@ -647,6 +672,107 @@ static int ath10k_monitor_destroy(struct ath10k *ar)
 	return ret;
 }
 
+static int ath10k_start_cac(struct ath10k *ar)
+{
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	set_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
+
+	ret = ath10k_monitor_create(ar);
+	if (ret) {
+		clear_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
+		return ret;
+	}
+
+	ret = ath10k_monitor_start(ar, ar->monitor_vdev_id);
+	if (ret) {
+		clear_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
+		ath10k_monitor_destroy(ar);
+		return ret;
+	}
+
+	ath10k_dbg(ATH10K_DBG_MAC, "mac cac start monitor vdev %d\n",
+		   ar->monitor_vdev_id);
+
+	return 0;
+}
+
+static int ath10k_stop_cac(struct ath10k *ar)
+{
+	lockdep_assert_held(&ar->conf_mutex);
+
+	/* CAC is not running - do nothing */
+	if (!test_bit(ATH10K_CAC_RUNNING, &ar->dev_flags))
+		return 0;
+
+	ath10k_monitor_stop(ar);
+	ath10k_monitor_destroy(ar);
+	clear_bit(ATH10K_CAC_RUNNING, &ar->dev_flags);
+
+	ath10k_dbg(ATH10K_DBG_MAC, "mac cac finished\n");
+
+	return 0;
+}
+
+static const char *ath10k_dfs_state(enum nl80211_dfs_state dfs_state)
+{
+	switch (dfs_state) {
+	case NL80211_DFS_USABLE:
+		return "USABLE";
+	case NL80211_DFS_UNAVAILABLE:
+		return "UNAVAILABLE";
+	case NL80211_DFS_AVAILABLE:
+		return "AVAILABLE";
+	default:
+		WARN_ON(1);
+		return "bug";
+	}
+}
+
+static void ath10k_config_radar_detection(struct ath10k *ar)
+{
+	struct ieee80211_channel *chan = ar->hw->conf.chandef.chan;
+	bool radar = ar->hw->conf.radar_enabled;
+	bool chan_radar = !!(chan->flags & IEEE80211_CHAN_RADAR);
+	enum nl80211_dfs_state dfs_state = chan->dfs_state;
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	ath10k_dbg(ATH10K_DBG_MAC,
+		   "mac radar config update: chan %dMHz radar %d chan radar %d chan state %s\n",
+		   chan->center_freq, radar, chan_radar,
+		   ath10k_dfs_state(dfs_state));
+
+	/*
+	 * It's safe to call it even if CAC is not started.
+	 * This call here guarantees changing channel, etc. will stop CAC.
+	 */
+	ath10k_stop_cac(ar);
+
+	if (!radar)
+		return;
+
+	if (!chan_radar)
+		return;
+
+	if (dfs_state != NL80211_DFS_USABLE)
+		return;
+
+	ret = ath10k_start_cac(ar);
+	if (ret) {
+		/*
+		 * Not possible to start CAC on current channel so starting
+		 * radiation is not allowed, make this channel DFS_UNAVAILABLE
+		 * by indicating that radar was detected.
+		 */
+		ath10k_warn("failed to start CAC (%d)\n", ret);
+		ieee80211_radar_detected(ar->hw);
+	}
+}
+
 static void ath10k_control_beaconing(struct ath10k_vif *arvif,
 				struct ieee80211_bss_conf *info)
 {
@@ -1356,14 +1482,17 @@ static int ath10k_update_channel_list(struct ath10k *ar)
 			ch->ht40plus =
 				!(channel->flags & IEEE80211_CHAN_NO_HT40PLUS);
 
+			ch->chan_radar =
+				!!(channel->flags & IEEE80211_CHAN_RADAR);
+
 			passive = channel->flags & IEEE80211_CHAN_NO_IR;
 			ch->passive = passive;
 
 			ch->freq = channel->center_freq;
-			ch->min_power = channel->max_power * 3;
-			ch->max_power = channel->max_power * 4;
-			ch->max_reg_power = channel->max_reg_power * 4;
-			ch->max_antenna_gain = channel->max_antenna_gain;
+			ch->min_power = 0;
+			ch->max_power = channel->max_power * 2;
+			ch->max_reg_power = channel->max_reg_power * 2;
+			ch->max_antenna_gain = channel->max_antenna_gain * 2;
 			ch->reg_class_id = 0; /* FIXME */
 
 			/* FIXME: why use only legacy modes, why not any
@@ -1423,9 +1552,20 @@ static void ath10k_reg_notifier(struct wiphy *wiphy,
 {
 	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
 	struct ath10k *ar = hw->priv;
+	bool result;
 
 	ath_reg_notifier_apply(wiphy, request, &ar->ath_common.regulatory);
 
+	if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) {
+		ath10k_dbg(ATH10K_DBG_REGULATORY, "dfs region 0x%x\n",
+			   request->dfs_region);
+		result = ar->dfs_detector->set_dfs_domain(ar->dfs_detector,
+							  request->dfs_region);
+		if (!result)
+			ath10k_warn("dfs region 0x%X not supported, will trigger radar for every pulse\n",
+				    request->dfs_region);
+	}
+
 	mutex_lock(&ar->conf_mutex);
 	if (ar->state == ATH10K_STATE_ON)
 		ath10k_regd_update(ar);
@@ -1666,7 +1806,7 @@ void ath10k_offchan_tx_work(struct work_struct *work)
 		}
 
 		spin_lock_bh(&ar->data_lock);
-		INIT_COMPLETION(ar->offchan_tx_completed);
+		reinit_completion(&ar->offchan_tx_completed);
 		ar->offchan_tx_skb = skb;
 		spin_unlock_bh(&ar->data_lock);
 
@@ -1714,8 +1854,10 @@ void ath10k_mgmt_over_wmi_tx_work(struct work_struct *work)
 			break;
 
 		ret = ath10k_wmi_mgmt_tx(ar, skb);
-		if (ret)
+		if (ret) {
 			ath10k_warn("wmi mgmt_tx failed (%d)\n", ret);
+			ieee80211_free_txskb(ar->hw, skb);
+		}
 	}
 }
 
@@ -1889,6 +2031,7 @@ void ath10k_halt(struct ath10k *ar)
 {
 	lockdep_assert_held(&ar->conf_mutex);
 
+	ath10k_stop_cac(ar);
 	del_timer_sync(&ar->scan.timeout);
 	ath10k_offchan_tx_purge(ar);
 	ath10k_mgmt_over_wmi_tx_purge(ar);
@@ -1943,7 +2086,7 @@ static int ath10k_start(struct ieee80211_hw *hw)
 		ath10k_warn("could not enable WMI_PDEV_PARAM_PMF_QOS (%d)\n",
 			    ret);
 
-	ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->dynamic_bw, 0);
+	ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->dynamic_bw, 1);
 	if (ret)
 		ath10k_warn("could not init WMI_PDEV_PARAM_DYNAMIC_BW (%d)\n",
 			    ret);
@@ -1998,15 +2141,40 @@ static int ath10k_config(struct ieee80211_hw *hw, u32 changed)
 	struct ath10k *ar = hw->priv;
 	struct ieee80211_conf *conf = &hw->conf;
 	int ret = 0;
+	u32 param;
 
 	mutex_lock(&ar->conf_mutex);
 
 	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
-		ath10k_dbg(ATH10K_DBG_MAC, "mac config channel %d mhz\n",
-			   conf->chandef.chan->center_freq);
+		ath10k_dbg(ATH10K_DBG_MAC,
+			   "mac config channel %d mhz flags 0x%x\n",
+			   conf->chandef.chan->center_freq,
+			   conf->chandef.chan->flags);
+
 		spin_lock_bh(&ar->data_lock);
 		ar->rx_channel = conf->chandef.chan;
 		spin_unlock_bh(&ar->data_lock);
+
+		ath10k_config_radar_detection(ar);
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_POWER) {
+		ath10k_dbg(ATH10K_DBG_MAC, "mac config power %d\n",
+			   hw->conf.power_level);
+
+		param = ar->wmi.pdev_param->txpower_limit2g;
+		ret = ath10k_wmi_pdev_set_param(ar, param,
+						hw->conf.power_level * 2);
+		if (ret)
+			ath10k_warn("mac failed to set 2g txpower %d (%d)\n",
+				    hw->conf.power_level, ret);
+
+		param = ar->wmi.pdev_param->txpower_limit5g;
+		ret = ath10k_wmi_pdev_set_param(ar, param,
+						hw->conf.power_level * 2);
+		if (ret)
+			ath10k_warn("mac failed to set 5g txpower %d (%d)\n",
+				    hw->conf.power_level, ret);
 	}
 
 	if (changed & IEEE80211_CONF_CHANGE_PS)
@@ -2049,6 +2217,7 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 	arvif->vif = vif;
 
 	INIT_WORK(&arvif->wep_key_work, ath10k_tx_wep_key_work);
+	INIT_LIST_HEAD(&arvif->list);
 
 	if ((vif->type == NL80211_IFTYPE_MONITOR) && ar->monitor_present) {
 		ath10k_warn("Only one monitor interface allowed\n");
@@ -2265,8 +2434,14 @@ static void ath10k_configure_filter(struct ieee80211_hw *hw,
 	*total_flags &= SUPPORTED_FILTERS;
 	ar->filter_flags = *total_flags;
 
+	/* Monitor must not be started if it wasn't created first.
+	 * Promiscuous mode may be started on a non-monitor interface - in
+	 * such case the monitor vdev is not created so starting the
+	 * monitor makes no sense. Since ath10k uses no special RX filters
+	 * (only BSS filter in STA mode) there's no need for any special
+	 * action here. */
 	if ((ar->filter_flags & FIF_PROMISC_IN_BSS) &&
-	    !ar->monitor_enabled) {
+	    !ar->monitor_enabled && ar->monitor_present) {
 		ath10k_dbg(ATH10K_DBG_MAC, "mac monitor %d start\n",
 			   ar->monitor_vdev_id);
 
@@ -2274,7 +2449,7 @@ static void ath10k_configure_filter(struct ieee80211_hw *hw,
 		if (ret)
 			ath10k_warn("Unable to start monitor mode\n");
 	} else if (!(ar->filter_flags & FIF_PROMISC_IN_BSS) &&
-		   ar->monitor_enabled) {
+		   ar->monitor_enabled && ar->monitor_present) {
 		ath10k_dbg(ATH10K_DBG_MAC, "mac monitor %d stop\n",
 			   ar->monitor_vdev_id);
 
@@ -2360,8 +2535,8 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 			ret = ath10k_peer_create(ar, arvif->vdev_id,
 						 info->bssid);
 			if (ret)
-				ath10k_warn("Failed to add peer: %pM for VDEV: %d\n",
-					    info->bssid, arvif->vdev_id);
+				ath10k_warn("Failed to add peer %pM for vdev %d when changin bssid: %i\n",
+					    info->bssid, arvif->vdev_id, ret);
 
 			if (vif->type == NL80211_IFTYPE_STATION) {
 				/*
@@ -2476,8 +2651,8 @@ static int ath10k_hw_scan(struct ieee80211_hw *hw,
 		goto exit;
 	}
 
-	INIT_COMPLETION(ar->scan.started);
-	INIT_COMPLETION(ar->scan.completed);
+	reinit_completion(&ar->scan.started);
+	reinit_completion(&ar->scan.completed);
 	ar->scan.in_progress = true;
 	ar->scan.aborting = false;
 	ar->scan.is_roc = false;
@@ -2542,6 +2717,44 @@ static void ath10k_cancel_hw_scan(struct ieee80211_hw *hw,
 	mutex_unlock(&ar->conf_mutex);
 }
 
+static void ath10k_set_key_h_def_keyidx(struct ath10k *ar,
+					struct ath10k_vif *arvif,
+					enum set_key_cmd cmd,
+					struct ieee80211_key_conf *key)
+{
+	u32 vdev_param = arvif->ar->wmi.vdev_param->def_keyid;
+	int ret;
+
+	/* 10.1 firmware branch requires default key index to be set to group
+	 * key index after installing it. Otherwise FW/HW Txes corrupted
+	 * frames with multi-vif APs. This is not required for main firmware
+	 * branch (e.g. 636).
+	 *
+	 * FIXME: This has been tested only in AP. It remains unknown if this
+	 * is required for multi-vif STA interfaces on 10.1 */
+
+	if (arvif->vdev_type != WMI_VDEV_TYPE_AP)
+		return;
+
+	if (key->cipher == WLAN_CIPHER_SUITE_WEP40)
+		return;
+
+	if (key->cipher == WLAN_CIPHER_SUITE_WEP104)
+		return;
+
+	if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
+		return;
+
+	if (cmd != SET_KEY)
+		return;
+
+	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
+					key->keyidx);
+	if (ret)
+		ath10k_warn("failed to set group key as default key: %d\n",
+			    ret);
+}
+
 static int ath10k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 			  struct ieee80211_vif *vif, struct ieee80211_sta *sta,
 			  struct ieee80211_key_conf *key)
@@ -2603,6 +2816,8 @@ static int ath10k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 		goto exit;
 	}
 
+	ath10k_set_key_h_def_keyidx(ar, arvif, cmd, key);
+
 	spin_lock_bh(&ar->data_lock);
 	peer = ath10k_peer_find(ar, arvif->vdev_id, peer_addr);
 	if (peer && cmd == SET_KEY)
@@ -2643,8 +2858,8 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 
 		ret = ath10k_peer_create(ar, arvif->vdev_id, sta->addr);
 		if (ret)
-			ath10k_warn("Failed to add peer: %pM for VDEV: %d\n",
-				    sta->addr, arvif->vdev_id);
+			ath10k_warn("Failed to add peer %pM for vdev %d when adding a new sta: %i\n",
+				    sta->addr, arvif->vdev_id, ret);
 	} else if ((old_state == IEEE80211_STA_NONE &&
 		    new_state == IEEE80211_STA_NOTEXIST)) {
 		/*
@@ -2832,9 +3047,9 @@ static int ath10k_remain_on_channel(struct ieee80211_hw *hw,
 		goto exit;
 	}
 
-	INIT_COMPLETION(ar->scan.started);
-	INIT_COMPLETION(ar->scan.completed);
-	INIT_COMPLETION(ar->scan.on_channel);
+	reinit_completion(&ar->scan.started);
+	reinit_completion(&ar->scan.completed);
+	reinit_completion(&ar->scan.on_channel);
 	ar->scan.in_progress = true;
 	ar->scan.aborting = false;
 	ar->scan.is_roc = true;
@@ -3249,12 +3464,36 @@ static const struct ieee80211_iface_limit ath10k_if_limits[] = {
 	},
 };
 
-static const struct ieee80211_iface_combination ath10k_if_comb = {
-	.limits = ath10k_if_limits,
-	.n_limits = ARRAY_SIZE(ath10k_if_limits),
-	.max_interfaces = 8,
-	.num_different_channels = 1,
-	.beacon_int_infra_match = true,
+#ifdef CONFIG_ATH10K_DFS_CERTIFIED
+static const struct ieee80211_iface_limit ath10k_if_dfs_limits[] = {
+	{
+	.max	= 8,
+	.types	= BIT(NL80211_IFTYPE_AP)
+	},
+};
+#endif
+
+static const struct ieee80211_iface_combination ath10k_if_comb[] = {
+	{
+		.limits = ath10k_if_limits,
+		.n_limits = ARRAY_SIZE(ath10k_if_limits),
+		.max_interfaces = 8,
+		.num_different_channels = 1,
+		.beacon_int_infra_match = true,
+	},
+#ifdef CONFIG_ATH10K_DFS_CERTIFIED
+	{
+		.limits = ath10k_if_dfs_limits,
+		.n_limits = ARRAY_SIZE(ath10k_if_dfs_limits),
+		.max_interfaces = 8,
+		.num_different_channels = 1,
+		.beacon_int_infra_match = true,
+		.radar_detect_widths =	BIT(NL80211_CHAN_WIDTH_20_NOHT) |
+					BIT(NL80211_CHAN_WIDTH_20) |
+					BIT(NL80211_CHAN_WIDTH_40) |
+					BIT(NL80211_CHAN_WIDTH_80),
+	}
+#endif
 };
 
 static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar)
@@ -3478,11 +3717,21 @@ int ath10k_mac_register(struct ath10k *ar)
 	 */
 	ar->hw->queues = 4;
 
-	ar->hw->wiphy->iface_combinations = &ath10k_if_comb;
-	ar->hw->wiphy->n_iface_combinations = 1;
+	ar->hw->wiphy->iface_combinations = ath10k_if_comb;
+	ar->hw->wiphy->n_iface_combinations = ARRAY_SIZE(ath10k_if_comb);
 
 	ar->hw->netdev_features = NETIF_F_HW_CSUM;
 
+	if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED)) {
+		/* Init ath dfs pattern detector */
+		ar->ath_common.debug_mask = ATH_DBG_DFS;
+		ar->dfs_detector = dfs_pattern_detector_init(&ar->ath_common,
+							     NL80211_DFS_UNSET);
+
+		if (!ar->dfs_detector)
+			ath10k_warn("dfs pattern detector init failed\n");
+	}
+
 	ret = ath_regd_init(&ar->ath_common.regulatory, ar->hw->wiphy,
 			    ath10k_reg_notifier);
 	if (ret) {
@@ -3518,6 +3767,9 @@ void ath10k_mac_unregister(struct ath10k *ar)
 {
 	ieee80211_unregister_hw(ar->hw);
 
+	if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector)
+		ar->dfs_detector->exit(ar->dfs_detector);
+
 	kfree(ar->mac.sbands[IEEE80211_BAND_2GHZ].channels);
 	kfree(ar->mac.sbands[IEEE80211_BAND_5GHZ].channels);