summaryrefslogtreecommitdiff
path: root/drivers/net/phy
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy')
-rw-r--r--drivers/net/phy/bcm63xx.c1
-rw-r--r--drivers/net/phy/broadcom.c4
-rw-r--r--drivers/net/phy/dp83867.c21
-rw-r--r--drivers/net/phy/marvell.c5
-rw-r--r--drivers/net/phy/mdio-bcm-iproc.c20
-rw-r--r--drivers/net/phy/mdio-bcm-unimac.c6
-rw-r--r--drivers/net/phy/mdio-mux-bcm-iproc.c7
-rw-r--r--drivers/net/phy/mscc.c4
-rw-r--r--drivers/net/phy/phy-c45.c6
-rw-r--r--drivers/net/phy/phy.c3
-rw-r--r--drivers/net/phy/phy_device.c17
-rw-r--r--drivers/net/phy/phylink.c8
-rw-r--r--drivers/net/phy/sfp-bus.c32
13 files changed, 99 insertions, 35 deletions
diff --git a/drivers/net/phy/bcm63xx.c b/drivers/net/phy/bcm63xx.c
index 23f1958ba6ad..459fb2069c7e 100644
--- a/drivers/net/phy/bcm63xx.c
+++ b/drivers/net/phy/bcm63xx.c
@@ -73,6 +73,7 @@ static struct phy_driver bcm63xx_driver[] = {
/* same phy as above, with just a different OUI */
.phy_id = 0x002bdc00,
.phy_id_mask = 0xfffffc00,
+ .name = "Broadcom BCM63XX (2)",
/* PHY_BASIC_FEATURES */
.flags = PHY_IS_INTERNAL,
.config_init = bcm63xx_config_init,
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 7d68b28bb893..a62229a8b1a4 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -410,7 +410,7 @@ static int bcm5481_config_aneg(struct phy_device *phydev)
struct device_node *np = phydev->mdio.dev.of_node;
int ret;
- /* Aneg firsly. */
+ /* Aneg firstly. */
ret = genphy_config_aneg(phydev);
/* Then we can set up the delay. */
@@ -463,7 +463,7 @@ static int bcm54616s_config_aneg(struct phy_device *phydev)
{
int ret;
- /* Aneg firsly. */
+ /* Aneg firstly. */
if (phydev->dev_flags & PHY_BCM_FLAGS_MODE_1000BX)
ret = genphy_c37_config_aneg(phydev);
else
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index 967f57ed0b65..9a07ad137c2e 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -28,7 +28,8 @@
#define DP83867_CTRL 0x1f
/* Extended Registers */
-#define DP83867_CFG4 0x0031
+#define DP83867_FLD_THR_CFG 0x002e
+#define DP83867_CFG4 0x0031
#define DP83867_CFG4_SGMII_ANEG_MASK (BIT(5) | BIT(6))
#define DP83867_CFG4_SGMII_ANEG_TIMER_11MS (3 << 5)
#define DP83867_CFG4_SGMII_ANEG_TIMER_800US (2 << 5)
@@ -91,6 +92,7 @@
#define DP83867_STRAP_STS2_CLK_SKEW_RX_MASK GENMASK(2, 0)
#define DP83867_STRAP_STS2_CLK_SKEW_RX_SHIFT 0
#define DP83867_STRAP_STS2_CLK_SKEW_NONE BIT(2)
+#define DP83867_STRAP_STS2_STRAP_FLD BIT(10)
/* PHY CTRL bits */
#define DP83867_PHYCR_TX_FIFO_DEPTH_SHIFT 14
@@ -125,6 +127,9 @@
/* CFG4 bits */
#define DP83867_CFG4_PORT_MIRROR_EN BIT(0)
+/* FLD_THR_CFG */
+#define DP83867_FLD_THR_CFG_ENERGY_LOST_THR_MASK 0x7
+
enum {
DP83867_PORT_MIRROING_KEEP,
DP83867_PORT_MIRROING_EN,
@@ -476,6 +481,20 @@ static int dp83867_config_init(struct phy_device *phydev)
phy_clear_bits_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4,
BIT(7));
+ bs = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_STRAP_STS2);
+ if (bs & DP83867_STRAP_STS2_STRAP_FLD) {
+ /* When using strap to enable FLD, the ENERGY_LOST_FLD_THR will
+ * be set to 0x2. This may causes the PHY link to be unstable -
+ * the default value 0x1 need to be restored.
+ */
+ ret = phy_modify_mmd(phydev, DP83867_DEVADDR,
+ DP83867_FLD_THR_CFG,
+ DP83867_FLD_THR_CFG_ENERGY_LOST_THR_MASK,
+ 0x1);
+ if (ret)
+ return ret;
+ }
+
if (phy_interface_is_rgmii(phydev) ||
phydev->interface == PHY_INTERFACE_MODE_SGMII) {
val = phy_read(phydev, MII_DP83867_PHYCTRL);
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 28e33ece4ce1..9a8badafea8a 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -1306,6 +1306,9 @@ static int marvell_read_status_page_an(struct phy_device *phydev,
}
}
+ if (!(status & MII_M1011_PHY_STATUS_RESOLVED))
+ return 0;
+
if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
phydev->duplex = DUPLEX_FULL;
else
@@ -1365,6 +1368,8 @@ static int marvell_read_status_page(struct phy_device *phydev, int page)
linkmode_zero(phydev->lp_advertising);
phydev->pause = 0;
phydev->asym_pause = 0;
+ phydev->speed = SPEED_UNKNOWN;
+ phydev->duplex = DUPLEX_UNKNOWN;
if (phydev->autoneg == AUTONEG_ENABLE)
err = marvell_read_status_page_an(phydev, fiber, status);
diff --git a/drivers/net/phy/mdio-bcm-iproc.c b/drivers/net/phy/mdio-bcm-iproc.c
index 7e9975d25066..f1ded03f0229 100644
--- a/drivers/net/phy/mdio-bcm-iproc.c
+++ b/drivers/net/phy/mdio-bcm-iproc.c
@@ -178,6 +178,23 @@ static int iproc_mdio_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_PM_SLEEP
+int iproc_mdio_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct iproc_mdio_priv *priv = platform_get_drvdata(pdev);
+
+ /* restore the mii clock configuration */
+ iproc_mdio_config_clk(priv->base);
+
+ return 0;
+}
+
+static const struct dev_pm_ops iproc_mdio_pm_ops = {
+ .resume = iproc_mdio_resume
+};
+#endif /* CONFIG_PM_SLEEP */
+
static const struct of_device_id iproc_mdio_of_match[] = {
{ .compatible = "brcm,iproc-mdio", },
{ /* sentinel */ },
@@ -188,6 +205,9 @@ static struct platform_driver iproc_mdio_driver = {
.driver = {
.name = "iproc-mdio",
.of_match_table = iproc_mdio_of_match,
+#ifdef CONFIG_PM_SLEEP
+ .pm = &iproc_mdio_pm_ops,
+#endif
},
.probe = iproc_mdio_probe,
.remove = iproc_mdio_remove,
diff --git a/drivers/net/phy/mdio-bcm-unimac.c b/drivers/net/phy/mdio-bcm-unimac.c
index 4a28fb29adaa..fbd36891ee64 100644
--- a/drivers/net/phy/mdio-bcm-unimac.c
+++ b/drivers/net/phy/mdio-bcm-unimac.c
@@ -242,11 +242,9 @@ static int unimac_mdio_probe(struct platform_device *pdev)
return -ENOMEM;
}
- priv->clk = devm_clk_get(&pdev->dev, NULL);
- if (PTR_ERR(priv->clk) == -EPROBE_DEFER)
+ priv->clk = devm_clk_get_optional(&pdev->dev, NULL);
+ if (IS_ERR(priv->clk))
return PTR_ERR(priv->clk);
- else
- priv->clk = NULL;
ret = clk_prepare_enable(priv->clk);
if (ret)
diff --git a/drivers/net/phy/mdio-mux-bcm-iproc.c b/drivers/net/phy/mdio-mux-bcm-iproc.c
index 88d409e48c1f..aad6809ebe39 100644
--- a/drivers/net/phy/mdio-mux-bcm-iproc.c
+++ b/drivers/net/phy/mdio-mux-bcm-iproc.c
@@ -288,8 +288,13 @@ static int mdio_mux_iproc_suspend(struct device *dev)
static int mdio_mux_iproc_resume(struct device *dev)
{
struct iproc_mdiomux_desc *md = dev_get_drvdata(dev);
+ int rc;
- clk_prepare_enable(md->core_clk);
+ rc = clk_prepare_enable(md->core_clk);
+ if (rc) {
+ dev_err(md->dev, "failed to enable core clk\n");
+ return rc;
+ }
mdio_mux_iproc_config(md);
return 0;
diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c
index 937ac7da2789..f686f40f6bdc 100644
--- a/drivers/net/phy/mscc.c
+++ b/drivers/net/phy/mscc.c
@@ -345,11 +345,11 @@ enum macsec_bank {
BIT(VSC8531_FORCE_LED_OFF) | \
BIT(VSC8531_FORCE_LED_ON))
-#define MSCC_VSC8584_REVB_INT8051_FW "mscc_vsc8584_revb_int8051_fb48.bin"
+#define MSCC_VSC8584_REVB_INT8051_FW "microchip/mscc_vsc8584_revb_int8051_fb48.bin"
#define MSCC_VSC8584_REVB_INT8051_FW_START_ADDR 0xe800
#define MSCC_VSC8584_REVB_INT8051_FW_CRC 0xfb48
-#define MSCC_VSC8574_REVB_INT8051_FW "mscc_vsc8574_revb_int8051_29e8.bin"
+#define MSCC_VSC8574_REVB_INT8051_FW "microchip/mscc_vsc8574_revb_int8051_29e8.bin"
#define MSCC_VSC8574_REVB_INT8051_FW_START_ADDR 0x4000
#define MSCC_VSC8574_REVB_INT8051_FW_CRC 0x29e8
diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index a1caeee12236..dd2e23fb67c0 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -167,7 +167,7 @@ EXPORT_SYMBOL_GPL(genphy_c45_restart_aneg);
*/
int genphy_c45_check_and_restart_aneg(struct phy_device *phydev, bool restart)
{
- int ret = 0;
+ int ret;
if (!restart) {
/* Configure and restart aneg if it wasn't set before */
@@ -180,9 +180,9 @@ int genphy_c45_check_and_restart_aneg(struct phy_device *phydev, bool restart)
}
if (restart)
- ret = genphy_c45_restart_aneg(phydev);
+ return genphy_c45_restart_aneg(phydev);
- return ret;
+ return 0;
}
EXPORT_SYMBOL_GPL(genphy_c45_check_and_restart_aneg);
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index d76e038cf2cb..355bfdef48d2 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -727,7 +727,8 @@ static irqreturn_t phy_interrupt(int irq, void *phy_dat)
phy_trigger_machine(phydev);
}
- if (phy_clear_interrupt(phydev))
+ /* did_interrupt() may have cleared the interrupt already */
+ if (!phydev->drv->did_interrupt && phy_clear_interrupt(phydev))
goto phy_err;
return IRQ_HANDLED;
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 6a5056e0ae77..28e3c5c0e3c3 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -247,7 +247,7 @@ static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
* MDIO bus driver and clock gated at this point.
*/
if (!netdev)
- return !phydev->suspended;
+ goto out;
if (netdev->wol_enabled)
return false;
@@ -267,7 +267,8 @@ static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
if (device_may_wakeup(&netdev->dev))
return false;
- return true;
+out:
+ return !phydev->suspended;
}
static int mdio_bus_phy_suspend(struct device *dev)
@@ -285,6 +286,8 @@ static int mdio_bus_phy_suspend(struct device *dev)
if (!mdio_bus_phy_may_suspend(phydev))
return 0;
+ phydev->suspended_by_mdio_bus = 1;
+
return phy_suspend(phydev);
}
@@ -293,9 +296,11 @@ static int mdio_bus_phy_resume(struct device *dev)
struct phy_device *phydev = to_phy_device(dev);
int ret;
- if (!mdio_bus_phy_may_suspend(phydev))
+ if (!phydev->suspended_by_mdio_bus)
goto no_resume;
+ phydev->suspended_by_mdio_bus = 0;
+
ret = phy_resume(phydev);
if (ret < 0)
return ret;
@@ -1792,7 +1797,7 @@ EXPORT_SYMBOL(genphy_restart_aneg);
*/
int genphy_check_and_restart_aneg(struct phy_device *phydev, bool restart)
{
- int ret = 0;
+ int ret;
if (!restart) {
/* Advertisement hasn't changed, but maybe aneg was never on to
@@ -1807,9 +1812,9 @@ int genphy_check_and_restart_aneg(struct phy_device *phydev, bool restart)
}
if (restart)
- ret = genphy_restart_aneg(phydev);
+ return genphy_restart_aneg(phydev);
- return ret;
+ return 0;
}
EXPORT_SYMBOL(genphy_check_and_restart_aneg);
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 70b9a143db84..6e66b8e77ec7 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -761,8 +761,14 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy,
config.interface = interface;
ret = phylink_validate(pl, supported, &config);
- if (ret)
+ if (ret) {
+ phylink_warn(pl, "validation of %s with support %*pb and advertisement %*pb failed: %d\n",
+ phy_modes(config.interface),
+ __ETHTOOL_LINK_MODE_MASK_NBITS, phy->supported,
+ __ETHTOOL_LINK_MODE_MASK_NBITS, config.advertising,
+ ret);
return ret;
+ }
phy->phylink = pl;
phy->phy_link_change = phylink_phy_change;
diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c
index d949ea7b4f8c..6900c68260e0 100644
--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
@@ -572,13 +572,15 @@ static void sfp_upstream_clear(struct sfp_bus *bus)
* the sfp_bus structure, incrementing its reference count. This must
* be put via sfp_bus_put() when done.
*
- * Returns: on success, a pointer to the sfp_bus structure,
- * %NULL if no SFP is specified,
- * on failure, an error pointer value:
- * corresponding to the errors detailed for
- * fwnode_property_get_reference_args().
- * %-ENOMEM if we failed to allocate the bus.
- * an error from the upstream's connect_phy() method.
+ * Returns:
+ * - on success, a pointer to the sfp_bus structure,
+ * - %NULL if no SFP is specified,
+ * - on failure, an error pointer value:
+ *
+ * - corresponding to the errors detailed for
+ * fwnode_property_get_reference_args().
+ * - %-ENOMEM if we failed to allocate the bus.
+ * - an error from the upstream's connect_phy() method.
*/
struct sfp_bus *sfp_bus_find_fwnode(struct fwnode_handle *fwnode)
{
@@ -612,13 +614,15 @@ EXPORT_SYMBOL_GPL(sfp_bus_find_fwnode);
* the SFP bus using sfp_register_upstream(). This takes a reference on the
* bus, so it is safe to put the bus after this call.
*
- * Returns: on success, a pointer to the sfp_bus structure,
- * %NULL if no SFP is specified,
- * on failure, an error pointer value:
- * corresponding to the errors detailed for
- * fwnode_property_get_reference_args().
- * %-ENOMEM if we failed to allocate the bus.
- * an error from the upstream's connect_phy() method.
+ * Returns:
+ * - on success, a pointer to the sfp_bus structure,
+ * - %NULL if no SFP is specified,
+ * - on failure, an error pointer value:
+ *
+ * - corresponding to the errors detailed for
+ * fwnode_property_get_reference_args().
+ * - %-ENOMEM if we failed to allocate the bus.
+ * - an error from the upstream's connect_phy() method.
*/
int sfp_bus_add_upstream(struct sfp_bus *bus, void *upstream,
const struct sfp_upstream_ops *ops)
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-03 11:51:09 +0300