diff options
Diffstat (limited to 'drivers/net/phy')
| -rw-r--r-- | drivers/net/phy/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/net/phy/motorcomm.c | 1635 |
2 files changed, 1634 insertions, 3 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index c57a0262fb64..040c8bf6d05b 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -260,7 +260,7 @@ config MOTORCOMM_PHY tristate "Motorcomm PHYs" help Enables support for Motorcomm network PHYs. - Currently supports the YT8511 gigabit PHY. + Currently supports the YT8511, YT8521 Gigabit Ethernet PHYs. config NATIONAL_PHY tristate "National Semiconductor PHYs" diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c index 7e6ac2c5e27e..c7593f224177 100644 --- a/drivers/net/phy/motorcomm.c +++ b/drivers/net/phy/motorcomm.c @@ -1,15 +1,106 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Driver for Motorcomm PHYs + * Motorcomm 8511/8521 PHY driver. * * Author: Peter Geis <pgwipeout@gmail.com> + * Author: Frank <Frank.Sae@motor-comm.com> */ +#include <linux/etherdevice.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/phy.h> #define PHY_ID_YT8511 0x0000010a +#define PHY_ID_YT8521 0x0000011A + +/* YT8521 Register Overview + * UTP Register space | FIBER Register space + * ------------------------------------------------------------ + * | UTP MII | FIBER MII | + * | UTP MMD | | + * | UTP Extended | FIBER Extended | + * ------------------------------------------------------------ + * | Common Extended | + * ------------------------------------------------------------ + */ + +/* 0x10 ~ 0x15 , 0x1E and 0x1F are common MII registers of yt phy */ + +/* Specific Function Control Register */ +#define YTPHY_SPECIFIC_FUNCTION_CONTROL_REG 0x10 + +/* 2b00 Manual MDI configuration + * 2b01 Manual MDIX configuration + * 2b10 Reserved + * 2b11 Enable automatic crossover for all modes *default* + */ +#define YTPHY_SFCR_MDI_CROSSOVER_MODE_MASK (BIT(6) | BIT(5)) +#define YTPHY_SFCR_CROSSOVER_EN BIT(3) +#define YTPHY_SFCR_SQE_TEST_EN BIT(2) +#define YTPHY_SFCR_POLARITY_REVERSAL_EN BIT(1) +#define YTPHY_SFCR_JABBER_DIS BIT(0) + +/* Specific Status Register */ +#define YTPHY_SPECIFIC_STATUS_REG 0x11 +#define YTPHY_SSR_SPEED_MODE_OFFSET 14 + +#define YTPHY_SSR_SPEED_MODE_MASK (BIT(15) | BIT(14)) +#define YTPHY_SSR_SPEED_10M 0x0 +#define YTPHY_SSR_SPEED_100M 0x1 +#define YTPHY_SSR_SPEED_1000M 0x2 +#define YTPHY_SSR_DUPLEX_OFFSET 13 +#define YTPHY_SSR_DUPLEX BIT(13) +#define YTPHY_SSR_PAGE_RECEIVED BIT(12) +#define YTPHY_SSR_SPEED_DUPLEX_RESOLVED BIT(11) +#define YTPHY_SSR_LINK BIT(10) +#define YTPHY_SSR_MDIX_CROSSOVER BIT(6) +#define YTPHY_SSR_DOWNGRADE BIT(5) +#define YTPHY_SSR_TRANSMIT_PAUSE BIT(3) +#define YTPHY_SSR_RECEIVE_PAUSE BIT(2) +#define YTPHY_SSR_POLARITY BIT(1) +#define YTPHY_SSR_JABBER BIT(0) + +/* Interrupt enable Register */ +#define YTPHY_INTERRUPT_ENABLE_REG 0x12 +#define YTPHY_IER_WOL BIT(6) + +/* Interrupt Status Register */ +#define YTPHY_INTERRUPT_STATUS_REG 0x13 +#define YTPHY_ISR_AUTONEG_ERR BIT(15) +#define YTPHY_ISR_SPEED_CHANGED BIT(14) +#define YTPHY_ISR_DUPLEX_CHANGED BIT(13) +#define YTPHY_ISR_PAGE_RECEIVED BIT(12) +#define YTPHY_ISR_LINK_FAILED BIT(11) +#define YTPHY_ISR_LINK_SUCCESSED BIT(10) +#define YTPHY_ISR_WOL BIT(6) +#define YTPHY_ISR_WIRESPEED_DOWNGRADE BIT(5) +#define YTPHY_ISR_SERDES_LINK_FAILED BIT(3) +#define YTPHY_ISR_SERDES_LINK_SUCCESSED BIT(2) +#define YTPHY_ISR_POLARITY_CHANGED BIT(1) +#define YTPHY_ISR_JABBER_HAPPENED BIT(0) + +/* Speed Auto Downgrade Control Register */ +#define YTPHY_SPEED_AUTO_DOWNGRADE_CONTROL_REG 0x14 +#define YTPHY_SADCR_SPEED_DOWNGRADE_EN BIT(5) + +/* If these bits are set to 3, the PHY attempts five times ( 3(set value) + + * additional 2) before downgrading, default 0x3 + */ +#define YTPHY_SADCR_SPEED_RETRY_LIMIT (0x3 << 2) + +/* Rx Error Counter Register */ +#define YTPHY_RX_ERROR_COUNTER_REG 0x15 + +/* Extended Register's Address Offset Register */ +#define YTPHY_PAGE_SELECT 0x1E + +/* Extended Register's Data Register */ +#define YTPHY_PAGE_DATA 0x1F + +/* FIBER Auto-Negotiation link partner ability */ +#define YTPHY_FLPA_PAUSE (0x3 << 7) +#define YTPHY_FLPA_ASYM_PAUSE (0x2 << 7) #define YT8511_PAGE_SELECT 0x1e #define YT8511_PAGE 0x1f @@ -38,6 +129,352 @@ #define YT8511_DELAY_FE_TX_EN (0xf << 12) #define YT8511_DELAY_FE_TX_DIS (0x2 << 12) +/* Extended register is different from MMD Register and MII Register. + * We can use ytphy_read_ext/ytphy_write_ext/ytphy_modify_ext function to + * operate extended register. + * Extended Register start + */ + +/* Phy gmii clock gating Register */ +#define YT8521_CLOCK_GATING_REG 0xC +#define YT8521_CGR_RX_CLK_EN BIT(12) + +#define YT8521_EXTREG_SLEEP_CONTROL1_REG 0x27 +#define YT8521_ESC1R_SLEEP_SW BIT(15) +#define YT8521_ESC1R_PLLON_SLP BIT(14) + +/* Phy fiber Link timer cfg2 Register */ +#define YT8521_LINK_TIMER_CFG2_REG 0xA5 +#define YT8521_LTCR_EN_AUTOSEN BIT(15) + +/* 0xA000, 0xA001, 0xA003 ,and 0xA006 ~ 0xA00A are common ext registers + * of yt8521 phy. There is no need to switch reg space when operating these + * registers. + */ + +#define YT8521_REG_SPACE_SELECT_REG 0xA000 +#define YT8521_RSSR_SPACE_MASK BIT(1) +#define YT8521_RSSR_FIBER_SPACE (0x1 << 1) +#define YT8521_RSSR_UTP_SPACE (0x0 << 1) +#define YT8521_RSSR_TO_BE_ARBITRATED (0xFF) + +#define YT8521_CHIP_CONFIG_REG 0xA001 +#define YT8521_CCR_SW_RST BIT(15) + +#define YT8521_CCR_MODE_SEL_MASK (BIT(2) | BIT(1) | BIT(0)) +#define YT8521_CCR_MODE_UTP_TO_RGMII 0 +#define YT8521_CCR_MODE_FIBER_TO_RGMII 1 +#define YT8521_CCR_MODE_UTP_FIBER_TO_RGMII 2 +#define YT8521_CCR_MODE_UTP_TO_SGMII 3 +#define YT8521_CCR_MODE_SGPHY_TO_RGMAC 4 +#define YT8521_CCR_MODE_SGMAC_TO_RGPHY 5 +#define YT8521_CCR_MODE_UTP_TO_FIBER_AUTO 6 +#define YT8521_CCR_MODE_UTP_TO_FIBER_FORCE 7 + +/* 3 phy polling modes,poll mode combines utp and fiber mode*/ +#define YT8521_MODE_FIBER 0x1 +#define YT8521_MODE_UTP 0x2 +#define YT8521_MODE_POLL 0x3 + +#define YT8521_RGMII_CONFIG1_REG 0xA003 + +/* TX Gig-E Delay is bits 3:0, default 0x1 + * TX Fast-E Delay is bits 7:4, default 0xf + * RX Delay is bits 13:10, default 0x0 + * Delay = 150ps * N + * On = 2250ps, off = 0ps + */ +#define YT8521_RC1R_RX_DELAY_MASK (0xF << 10) +#define YT8521_RC1R_RX_DELAY_EN (0xF << 10) +#define YT8521_RC1R_RX_DELAY_DIS (0x0 << 10) +#define YT8521_RC1R_FE_TX_DELAY_MASK (0xF << 4) +#define YT8521_RC1R_FE_TX_DELAY_EN (0xF << 4) +#define YT8521_RC1R_FE_TX_DELAY_DIS (0x0 << 4) +#define YT8521_RC1R_GE_TX_DELAY_MASK (0xF << 0) +#define YT8521_RC1R_GE_TX_DELAY_EN (0xF << 0) +#define YT8521_RC1R_GE_TX_DELAY_DIS (0x0 << 0) + +#define YTPHY_MISC_CONFIG_REG 0xA006 +#define YTPHY_MCR_FIBER_SPEED_MASK BIT(0) +#define YTPHY_MCR_FIBER_1000BX (0x1 << 0) +#define YTPHY_MCR_FIBER_100FX (0x0 << 0) + +/* WOL MAC ADDR: MACADDR2(highest), MACADDR1(middle), MACADDR0(lowest) */ +#define YTPHY_WOL_MACADDR2_REG 0xA007 +#define YTPHY_WOL_MACADDR1_REG 0xA008 +#define YTPHY_WOL_MACADDR0_REG 0xA009 + +#define YTPHY_WOL_CONFIG_REG 0xA00A +#define YTPHY_WCR_INTR_SEL BIT(6) +#define YTPHY_WCR_ENABLE BIT(3) + +/* 2b00 84ms + * 2b01 168ms *default* + * 2b10 336ms + * 2b11 672ms + */ +#define YTPHY_WCR_PULSE_WIDTH_MASK (BIT(2) | BIT(1)) +#define YTPHY_WCR_PULSE_WIDTH_672MS (BIT(2) | BIT(1)) + +/* 1b0 Interrupt and WOL events is level triggered and active LOW *default* + * 1b1 Interrupt and WOL events is pulse triggered and active LOW + */ +#define YTPHY_WCR_TYPE_PULSE BIT(0) + +/* Extended Register end */ + +struct yt8521_priv { + /* combo_advertising is used for case of YT8521 in combo mode, + * this means that yt8521 may work in utp or fiber mode which depends + * on which media is connected (YT8521_RSSR_TO_BE_ARBITRATED). + */ + __ETHTOOL_DECLARE_LINK_MODE_MASK(combo_advertising); + + /* YT8521_MODE_FIBER / YT8521_MODE_UTP / YT8521_MODE_POLL*/ + u8 polling_mode; + u8 strap_mode; /* 8 working modes */ + /* current reg page of yt8521 phy: + * YT8521_RSSR_UTP_SPACE + * YT8521_RSSR_FIBER_SPACE + * YT8521_RSSR_TO_BE_ARBITRATED + */ + u8 reg_page; +}; + +/** + * ytphy_read_ext() - read a PHY's extended register + * @phydev: a pointer to a &struct phy_device + * @regnum: register number to read + * + * NOTE:The caller must have taken the MDIO bus lock. + * + * returns the value of regnum reg or negative error code + */ +static int ytphy_read_ext(struct phy_device *phydev, u16 regnum) +{ + int ret; + + ret = __phy_write(phydev, YTPHY_PAGE_SELECT, regnum); + if (ret < 0) + return ret; + + return __phy_read(phydev, YTPHY_PAGE_DATA); +} + +/** + * ytphy_read_ext_with_lock() - read a PHY's extended register + * @phydev: a pointer to a &struct phy_device + * @regnum: register number to read + * + * returns the value of regnum reg or negative error code + */ +static int ytphy_read_ext_with_lock(struct phy_device *phydev, u16 regnum) +{ + int ret; + + phy_lock_mdio_bus(phydev); + ret = ytphy_read_ext(phydev, regnum); + phy_unlock_mdio_bus(phydev); + + return ret; +} + +/** + * ytphy_write_ext() - write a PHY's extended register + * @phydev: a pointer to a &struct phy_device + * @regnum: register number to write + * @val: value to write to @regnum + * + * NOTE:The caller must have taken the MDIO bus lock. + * + * returns 0 or negative error code + */ +static int ytphy_write_ext(struct phy_device *phydev, u16 regnum, u16 val) +{ + int ret; + + ret = __phy_write(phydev, YTPHY_PAGE_SELECT, regnum); + if (ret < 0) + return ret; + + return __phy_write(phydev, YTPHY_PAGE_DATA, val); +} + +/** + * ytphy_write_ext_with_lock() - write a PHY's extended register + * @phydev: a pointer to a &struct phy_device + * @regnum: register number to write + * @val: value to write to @regnum + * + * returns 0 or negative error code + */ +static int ytphy_write_ext_with_lock(struct phy_device *phydev, u16 regnum, + u16 val) +{ + int ret; + + phy_lock_mdio_bus(phydev); + ret = ytphy_write_ext(phydev, regnum, val); + phy_unlock_mdio_bus(phydev); + + return ret; +} + +/** + * ytphy_modify_ext() - bits modify a PHY's extended register + * @phydev: a pointer to a &struct phy_device + * @regnum: register number to write + * @mask: bit mask of bits to clear + * @set: bit mask of bits to set + * + * NOTE: Convenience function which allows a PHY's extended register to be + * modified as new register value = (old register value & ~mask) | set. + * The caller must have taken the MDIO bus lock. + * + * returns 0 or negative error code + */ +static int ytphy_modify_ext(struct phy_device *phydev, u16 regnum, u16 mask, + u16 set) +{ + int ret; + + ret = __phy_write(phydev, YTPHY_PAGE_SELECT, regnum); + if (ret < 0) + return ret; + + return __phy_modify(phydev, YTPHY_PAGE_DATA, mask, set); +} + +/** + * ytphy_modify_ext_with_lock() - bits modify a PHY's extended register + * @phydev: a pointer to a &struct phy_device + * @regnum: register number to write + * @mask: bit mask of bits to clear + * @set: bit mask of bits to set + * + * NOTE: Convenience function which allows a PHY's extended register to be + * modified as new register value = (old register value & ~mask) | set. + * + * returns 0 or negative error code + */ +static int ytphy_modify_ext_with_lock(struct phy_device *phydev, u16 regnum, + u16 mask, u16 set) +{ + int ret; + + phy_lock_mdio_bus(phydev); + ret = ytphy_modify_ext(phydev, regnum, mask, set); + phy_unlock_mdio_bus(phydev); + + return ret; +} + +/** + * ytphy_get_wol() - report whether wake-on-lan is enabled + * @phydev: a pointer to a &struct phy_device + * @wol: a pointer to a &struct ethtool_wolinfo + * + * NOTE: YTPHY_WOL_CONFIG_REG is common ext reg. + */ +static void ytphy_get_wol(struct phy_device *phydev, + struct ethtool_wolinfo *wol) +{ + int wol_config; + + wol->supported = WAKE_MAGIC; + wol->wolopts = 0; + + wol_config = ytphy_read_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG); + if (wol_config < 0) + return; + + if (wol_config & YTPHY_WCR_ENABLE) + wol->wolopts |= WAKE_MAGIC; +} + +/** + * ytphy_set_wol() - turn wake-on-lan on or off + * @phydev: a pointer to a &struct phy_device + * @wol: a pointer to a &struct ethtool_wolinfo + * + * NOTE: YTPHY_WOL_CONFIG_REG, YTPHY_WOL_MACADDR2_REG, YTPHY_WOL_MACADDR1_REG + * and YTPHY_WOL_MACADDR0_REG are common ext reg. The + * YTPHY_INTERRUPT_ENABLE_REG of UTP is special, fiber also use this register. + * + * returns 0 or negative errno code + */ +static int ytphy_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol) +{ + struct net_device *p_attached_dev; + const u16 mac_addr_reg[] = { + YTPHY_WOL_MACADDR2_REG, + YTPHY_WOL_MACADDR1_REG, + YTPHY_WOL_MACADDR0_REG, + }; + const u8 *mac_addr; + int old_page; + int ret = 0; + u16 mask; + u16 val; + u8 i; + + if (wol->wolopts & WAKE_MAGIC) { + p_attached_dev = phydev->attached_dev; + if (!p_attached_dev) + return -ENODEV; + + mac_addr = (const u8 *)p_attached_dev->dev_addr; + if (!is_valid_ether_addr(mac_addr)) + return -EINVAL; + + /* lock mdio bus then switch to utp reg space */ + old_page = phy_select_page(phydev, YT8521_RSSR_UTP_SPACE); + if (old_page < 0) + goto err_restore_page; + + /* Store the device address for the magic packet */ + for (i = 0; i < 3; i++) { + ret = ytphy_write_ext(phydev, mac_addr_reg[i], + ((mac_addr[i * 2] << 8)) | + (mac_addr[i * 2 + 1])); + if (ret < 0) + goto err_restore_page; + } + + /* Enable WOL feature */ + mask = YTPHY_WCR_PULSE_WIDTH_MASK | YTPHY_WCR_INTR_SEL; + val = YTPHY_WCR_ENABLE | YTPHY_WCR_INTR_SEL; + val |= YTPHY_WCR_TYPE_PULSE | YTPHY_WCR_PULSE_WIDTH_672MS; + ret = ytphy_modify_ext(phydev, YTPHY_WOL_CONFIG_REG, mask, val); + if (ret < 0) + goto err_restore_page; + + /* Enable WOL interrupt */ + ret = __phy_modify(phydev, YTPHY_INTERRUPT_ENABLE_REG, 0, + YTPHY_IER_WOL); + if (ret < 0) + goto err_restore_page; + + } else { + old_page = phy_select_page(phydev, YT8521_RSSR_UTP_SPACE); + if (old_page < 0) + goto err_restore_page; + + /* Disable WOL feature */ + mask = YTPHY_WCR_ENABLE | YTPHY_WCR_INTR_SEL; + ret = ytphy_modify_ext(phydev, YTPHY_WOL_CONFIG_REG, mask, 0); + + /* Disable WOL interrupt */ + ret = __phy_modify(phydev, YTPHY_INTERRUPT_ENABLE_REG, + YTPHY_IER_WOL, 0); + if (ret < 0) + goto err_restore_page; + } + +err_restore_page: + return phy_restore_page(phydev, old_page, ret); +} + static int yt8511_read_page(struct phy_device *phydev) { return __phy_read(phydev, YT8511_PAGE_SELECT); @@ -111,6 +548,1181 @@ err_restore_page: return phy_restore_page(phydev, oldpage, ret); } +/** + * yt8521_read_page() - read reg page + * @phydev: a pointer to a &struct phy_device + * + * returns current reg space of yt8521 (YT8521_RSSR_FIBER_SPACE/ + * YT8521_RSSR_UTP_SPACE) or negative errno code + */ +static int yt8521_read_page(struct phy_device *phydev) +{ + int old_page; + + old_page = ytphy_read_ext(phydev, YT8521_REG_SPACE_SELECT_REG); + if (old_page < 0) + return old_page; + + if ((old_page & YT8521_RSSR_SPACE_MASK) == YT8521_RSSR_FIBER_SPACE) + return YT8521_RSSR_FIBER_SPACE; + + return YT8521_RSSR_UTP_SPACE; +}; + +/** + * yt8521_write_page() - write reg page + * @phydev: a pointer to a &struct phy_device + * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to write. + * + * returns 0 or negative errno code + */ +static int yt8521_write_page(struct phy_device *phydev, int page) +{ + int mask = YT8521_RSSR_SPACE_MASK; + int set; + + if ((page & YT8521_RSSR_SPACE_MASK) == YT8521_RSSR_FIBER_SPACE) + set = YT8521_RSSR_FIBER_SPACE; + else + set = YT8521_RSSR_UTP_SPACE; + + return ytphy_modify_ext(phydev, YT8521_REG_SPACE_SELECT_REG, mask, set); +}; + +/** + * yt8521_probe() - read chip config then set suitable polling_mode + * @phydev: a pointer to a &struct phy_device + * + * returns 0 or negative errno code + */ +static int yt8521_probe(struct phy_device *phydev) +{ + struct device *dev = &phydev->mdio.dev; + struct yt8521_priv *priv; + int chip_config; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + phydev->priv = priv; + + chip_config = ytphy_read_ext_with_lock(phydev, YT8521_CHIP_CONFIG_REG); + if (chip_config < 0) + return chip_config; + + priv->strap_mode = chip_config & YT8521_CCR_MODE_SEL_MASK; + switch (priv->strap_mode) { + case YT8521_CCR_MODE_FIBER_TO_RGMII: + case YT8521_CCR_MODE_SGPHY_TO_RGMAC: + case YT8521_CCR_MODE_SGMAC_TO_RGPHY: + priv->polling_mode = YT8521_MODE_FIBER; + priv->reg_page = YT8521_RSSR_FIBER_SPACE; + phydev->port = PORT_FIBRE; + break; + case YT8521_CCR_MODE_UTP_FIBER_TO_RGMII: + case YT8521_CCR_MODE_UTP_TO_FIBER_AUTO: + case YT8521_CCR_MODE_UTP_TO_FIBER_FORCE: + priv->polling_mode = YT8521_MODE_POLL; + priv->reg_page = YT8521_RSSR_TO_BE_ARBITRATED; + phydev->port = PORT_NONE; + break; + case YT8521_CCR_MODE_UTP_TO_SGMII: + case YT8521_CCR_MODE_UTP_TO_RGMII: + priv->polling_mode = YT8521_MODE_UTP; + priv->reg_page = YT8521_RSSR_UTP_SPACE; + phydev->port = PORT_TP; + break; + } + /* set default reg space */ + if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) { + ret = ytphy_write_ext_with_lock(phydev, + YT8521_REG_SPACE_SELECT_REG, + priv->reg_page); + if (ret < 0) + return ret; + } + + return 0; +} + +/** + * ytphy_utp_read_lpa() - read LPA then setup lp_advertising for utp + * @phydev: a pointer to a &struct phy_device + * + * NOTE:The caller must have taken the MDIO bus lock. + * + * returns 0 or negative errno code + */ +static int ytphy_utp_read_lpa(struct phy_device *phydev) +{ + int lpa, lpagb; + + if (phydev->autoneg == AUTONEG_ENABLE) { + if (!phydev->autoneg_complete) { + mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, + 0); + mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, 0); + return 0; + } + + if (phydev->is_gigabit_capable) { + lpagb = __phy_read(phydev, MII_STAT1000); + if (lpagb < 0) + return lpagb; + + if (lpagb & LPA_1000MSFAIL) { + int adv = __phy_read(phydev, MII_CTRL1000); + + if (adv < 0) + return adv; + + if (adv & CTL1000_ENABLE_MASTER) + phydev_err(phydev, "Master/Slave resolution failed, maybe conflicting manual settings?\n"); + else + phydev_err(phydev, "Master/Slave resolution failed\n"); + return -ENOLINK; + } + + mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, + lpagb); + } + + lpa = __phy_read(phydev, MII_LPA); + if (lpa < 0) + return lpa; + + mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, lpa); + } else { + linkmode_zero(phydev->lp_advertising); + } + + return 0; +} + +/** + * yt8521_adjust_status() - update speed and duplex to phydev. when in fiber + * mode, adjust speed and duplex. + * @phydev: a pointer to a &struct phy_device + * @status: yt8521 status read from YTPHY_SPECIFIC_STATUS_REG + * @is_utp: false(yt8521 work in fiber mode) or true(yt8521 work in utp mode) + * + * NOTE:The caller must have taken the MDIO bus lock. + * + * returns 0 + */ +static int yt8521_adjust_status(struct phy_device *phydev, int status, + bool is_utp) +{ + int speed_mode, duplex; + int speed; + int err; + int lpa; + + if (is_utp) + duplex = (status & YTPHY_SSR_DUPLEX) >> YTPHY_SSR_DUPLEX_OFFSET; + else + duplex = DUPLEX_FULL; /* for fiber, it always DUPLEX_FULL */ + + speed_mode = (status & YTPHY_SSR_SPEED_MODE_MASK) >> + YTPHY_SSR_SPEED_MODE_OFFSET; + + switch (speed_mode) { + case YTPHY_SSR_SPEED_10M: + if (is_utp) + speed = SPEED_10; + else + /* for fiber, it will never run here, default to + * SPEED_UNKNOWN + */ + speed = SPEED_UNKNOWN; + break; + case YTPHY_SSR_SPEED_100M: + speed = SPEED_100; + break; + case YTPHY_SSR_SPEED_1000M: + speed = SPEED_1000; + break; + default: + speed = SPEED_UNKNOWN; + break; + } + + phydev->speed = speed; + phydev->duplex = duplex; + + if (is_utp) { + err = ytphy_utp_read_lpa(phydev); + if (err < 0) + return err; + + phy_resolve_aneg_pause(phydev); + } else { + lpa = __phy_read(phydev, MII_LPA); + if (lpa < 0) + return lpa; + + /* only support 1000baseX Full */ + linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, + phydev->lp_advertising, lpa & LPA_1000XFULL); + + if (!(lpa & YTPHY_FLPA_PAUSE)) { + phydev->pause = 0; + phydev->asym_pause = 0; + } else if ((lpa & YTPHY_FLPA_ASYM_PAUSE)) { + phydev->pause = 1; + phydev->asym_pause = 1; + } else { + phydev->pause = 1; + phydev->asym_pause = 0; + } + } + + return 0; +} + +/** + * yt8521_read_status_paged() - determines the speed and duplex of one page + * @phydev: a pointer to a &struct phy_device + * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to + * operate. + * + * returns 1 (utp or fiber link),0 (no link) or negative errno code + */ +static int yt8521_read_status_paged(struct phy_device *phydev, int page) +{ + int fiber_latch_val; + int fiber_curr_val; + int old_page; + int ret = 0; + int status; + int link; + + linkmode_zero(phydev->lp_advertising); + phydev->duplex = DUPLEX_UNKNOWN; + phydev->speed = SPEED_UNKNOWN; + phydev->asym_pause = 0; + phydev->pause = 0; + + /* YT8521 has two reg space (utp/fiber) for linkup with utp/fiber + * respectively. but for utp/fiber combo mode, reg space should be + * arbitrated based on media priority. by default, utp takes + * priority. reg space should be properly set before read + * YTPHY_SPECIFIC_STATUS_REG. + */ + + page &= YT8521_RSSR_SPACE_MASK; + old_page = phy_select_page(phydev, page); + if (old_page < 0) + goto err_restore_page; + + /* Read YTPHY_SPECIFIC_STATUS_REG, which indicates the speed and duplex + * of the PHY is actually using. + */ + ret = __phy_read(phydev, YTPHY_SPECIFIC_STATUS_REG); + if (ret < 0) + goto err_restore_page; + + status = ret; + link = !!(status & YTPHY_SSR_LINK); + + /* When PHY is in fiber mode, speed transferred from 1000Mbps to + * 100Mbps,there is not link down from YTPHY_SPECIFIC_STATUS_REG, so + * we need check MII_BMSR to identify such case. + */ + if (page == YT8521_RSSR_FIBER_SPACE) { + ret = __phy_read(phydev, MII_BMSR); + if (ret < 0) + goto err_restore_page; + + fiber_latch_val = ret; + ret = __phy_read(phydev, MII_BMSR); + if (ret < 0) + goto err_restore_page; + + fiber_curr_val = ret; + if (link && fiber_latch_val != fiber_curr_val) { + link = 0; + phydev_info(phydev, + "%s, fiber link down detect, latch = %04x, curr = %04x\n", + __func__, fiber_latch_val, fiber_curr_val); + } + } else { + /* Read autonegotiation status */ + ret = __phy_read(phydev, MII_BMSR); + if (ret < 0) + goto err_restore_page; + + phydev->autoneg_complete = ret & BMSR_ANEGCOMPLETE ? 1 : 0; + } + + if (link) { + if (page == YT8521_RSSR_UTP_SPACE) + yt8521_adjust_status(phydev, status, true); + else + yt8521_adjust_status(phydev, status, false); + } + return phy_restore_page(phydev, old_page, link); + +err_restore_page: + return phy_restore_page(phydev, old_page, ret); +} + +/** + * yt8521_read_status() - determines the negotiated speed and duplex + * @phydev: a pointer to a &struct phy_device + * + * returns 0 or negative errno code + */ +static int yt8521_read_status(struct phy_device *phydev) +{ + struct yt8521_priv *priv = phydev->priv; + int link_fiber = 0; + int link_utp; + int link; + int ret; + + if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) { + link = yt8521_read_status_paged(phydev, priv->reg_page); + if (link < 0) + return link; + } else { + /* when page is YT8521_RSSR_TO_BE_ARBITRATED, arbitration is + * needed. by default, utp is higher priority. + */ + + link_utp = yt8521_read_status_paged(phydev, + YT8521_RSSR_UTP_SPACE); + if (link_utp < 0) + return link_utp; + + if (!link_utp) { + link_fiber = yt8521_read_status_paged(phydev, + YT8521_RSSR_FIBER_SPACE); + if (link_fiber < 0) + return link_fiber; + } + + link = link_utp || link_fiber; + } + + if (link) { + if (phydev->link == 0) { + /* arbitrate reg space based on linkup media type. */ + if (priv->polling_mode == YT8521_MODE_POLL && + priv->reg_page == YT8521_RSSR_TO_BE_ARBITRATED) { + if (link_fiber) + priv->reg_page = + YT8521_RSSR_FIBER_SPACE; + else + priv->reg_page = YT8521_RSSR_UTP_SPACE; + + ret = ytphy_write_ext_with_lock(phydev, + YT8521_REG_SPACE_SELECT_REG, + priv->reg_page); + if (ret < 0) + return ret; + + phydev->port = link_fiber ? PORT_FIBRE : PORT_TP; + + phydev_info(phydev, "%s, link up, media: %s\n", + __func__, + (phydev->port == PORT_TP) ? + "UTP" : "Fiber"); + } + } + phydev->link = 1; + } else { + if (phydev->link == 1) { + phydev_info(phydev, "%s, link down, media: %s\n", + __func__, (phydev->port == PORT_TP) ? + "UTP" : "Fiber"); + + /* When in YT8521_MODE_POLL mode, need prepare for next + * arbitration. + */ + if (priv->polling_mode == YT8521_MODE_POLL) { + priv->reg_page = YT8521_RSSR_TO_BE_ARBITRATED; + phydev->port = PORT_NONE; + } + } + + phydev->link = 0; + } + + return 0; +} + +/** + * yt8521_modify_bmcr_paged - bits modify a PHY's BMCR register of one page + * @phydev: the phy_device struct + * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to operate + * @mask: bit mask of bits to clear + * @set: bit mask of bits to set + * + * NOTE: Convenience function which allows a PHY's BMCR register to be + * modified as new register value = (old register value & ~mask) | set. + * YT8521 has two space (utp/fiber) and three mode (utp/fiber/poll), each space + * has MII_BMCR. poll mode combines utp and faber,so need do both. + * If it is reset, it will wait for completion. + * + * returns 0 or negative errno code + */ +static int yt8521_modify_bmcr_paged(struct phy_device *phydev, int page, + u16 mask, u16 set) +{ + int max_cnt = 500; /* the max wait time of reset ~ 500 ms */ + int old_page; + int ret = 0; + + old_page = phy_select_page(phydev, page & YT8521_RSSR_SPACE_MASK); + if (old_page < 0) + goto err_restore_page; + + ret = __phy_modify(phydev, MII_BMCR, mask, set); + if (ret < 0) + goto err_restore_page; + + /* If it is reset, need to wait for the reset to complete */ + if (set == BMCR_RESET) { + while (max_cnt--) { + usleep_range(1000, 1100); + ret = __phy_read(phydev, MII_BMCR); + if (ret < 0) + goto err_restore_page; + + if (!(ret & BMCR_RESET)) + return phy_restore_page(phydev, old_page, 0); + } + } + +err_restore_page: + return phy_restore_page(phydev, old_page, ret); +} + +/** + * yt8521_modify_utp_fiber_bmcr - bits modify a PHY's BMCR register + * @phydev: the phy_device struct + * @mask: bit mask of bits to clear + * @set: bit mask of bits to set + * + * NOTE: Convenience function which allows a PHY's BMCR register to be + * modified as new register value = (old register value & ~mask) | set. + * YT8521 has two space (utp/fiber) and three mode (utp/fiber/poll), each space + * has MII_BMCR. poll mode combines utp and faber,so need do both. + * + * returns 0 or negative errno code + */ +static int yt8521_modify_utp_fiber_bmcr(struct phy_device *phydev, u16 mask, + u16 set) +{ + struct yt8521_priv *priv = phydev->priv; + int ret; + + if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) { + ret = yt8521_modify_bmcr_paged(phydev, priv->reg_page, mask, + set); + if (ret < 0) + return ret; + } else { + ret = yt8521_modify_bmcr_paged(phydev, YT8521_RSSR_UTP_SPACE, + mask, set); + if (ret < 0) + return ret; + + ret = yt8521_modify_bmcr_paged(phydev, YT8521_RSSR_FIBER_SPACE, + mask, set); + if (ret < 0) + return ret; + } + return 0; +} + +/** + * yt8521_soft_reset() - called to issue a PHY software reset + * @phydev: a pointer to a &struct phy_device + * + * returns 0 or negative errno code + */ +static int yt8521_soft_reset(struct phy_device *phydev) +{ + return yt8521_modify_utp_fiber_bmcr(phydev, 0, BMCR_RESET); +} + +/** + * yt8521_suspend() - suspend the hardware + * @phydev: a pointer to a &struct phy_device + * + * returns 0 or negative errno code + */ +static int yt8521_suspend(struct phy_device *phydev) +{ + int wol_config; + + /* YTPHY_WOL_CONFIG_REG is common ext reg */ + wol_config = ytphy_read_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG); + if (wol_config < 0) + return wol_config; + + /* if wol enable, do nothing */ + if (wol_config & YTPHY_WCR_ENABLE) + return 0; + + return yt8521_modify_utp_fiber_bmcr(phydev, 0, BMCR_PDOWN); +} + +/** + * yt8521_resume() - resume the hardware + * @phydev: a pointer to a &struct phy_device + * + * returns 0 or negative errno code + */ +static int yt8521_resume(struct phy_device *phydev) +{ + int ret; + int wol_config; + + /* disable auto sleep */ + ret = ytphy_modify_ext_with_lock(phydev, + YT8521_EXTREG_SLEEP_CONTROL1_REG, + YT8521_ESC1R_SLEEP_SW, 0); + if (ret < 0) + return ret; + + wol_config = ytphy_read_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG); + if (wol_config < 0) + return wol_config; + + /* if wol enable, do nothing */ + if (wol_config & YTPHY_WCR_ENABLE) + return 0; + + return yt8521_modify_utp_fiber_bmcr(phydev, BMCR_PDOWN, 0); +} + +/** + * yt8521_config_init() - called to initialize the PHY + * @phydev: a pointer to a &struct phy_device + * + * returns 0 or negative errno code + */ +static int yt8521_config_init(struct phy_device *phydev) +{ + int old_page; + int ret = 0; + u16 val; + + old_page = phy_select_page(phydev, YT8521_RSSR_UTP_SPACE); + if (old_page < 0) + goto err_restore_page; + + switch (phydev->interface) { + case PHY_INTERFACE_MODE_RGMII: + val = YT8521_RC1R_GE_TX_DELAY_DIS | YT8521_RC1R_GE_TX_DELAY_DIS; + val |= YT8521_RC1R_RX_DELAY_DIS; + break; + case PHY_INTERFACE_MODE_RGMII_RXID: + val = YT8521_RC1R_GE_TX_DELAY_DIS | YT8521_RC1R_GE_TX_DELAY_DIS; + val |= YT8521_RC1R_RX_DELAY_EN; + break; + case PHY_INTERFACE_MODE_RGMII_TXID: + val = YT8521_RC1R_GE_TX_DELAY_EN | YT8521_RC1R_GE_TX_DELAY_EN; + val |= YT8521_RC1R_RX_DELAY_DIS; + break; + case PHY_INTERFACE_MODE_RGMII_ID: + val = YT8521_RC1R_GE_TX_DELAY_EN | YT8521_RC1R_GE_TX_DELAY_EN; + val |= YT8521_RC1R_RX_DELAY_EN; + break; + case PHY_INTERFACE_MODE_SGMII: + break; + default: /* do not support other modes */ + ret = -EOPNOTSUPP; + goto err_restore_page; + } + + /* set rgmii delay mode */ + if (phydev->interface != PHY_INTERFACE_MODE_SGMII) { + ret = ytphy_modify_ext(phydev, YT8521_RGMII_CONFIG1_REG, + (YT8521_RC1R_RX_DELAY_MASK | + YT8521_RC1R_FE_TX_DELAY_MASK | + YT8521_RC1R_GE_TX_DELAY_MASK), + val); + if (ret < 0) + goto err_restore_page; + } + + /* disable auto sleep */ + ret = ytphy_modify_ext(phydev, YT8521_EXTREG_SLEEP_CONTROL1_REG, + YT8521_ESC1R_SLEEP_SW, 0); + if (ret < 0) + goto err_restore_page; + + /* enable RXC clock when no wire plug */ + ret = ytphy_modify_ext(phydev, YT8521_CLOCK_GATING_REG, + YT8521_CGR_RX_CLK_EN, 0); + if (ret < 0) + goto err_restore_page; + +err_restore_page: + return phy_restore_page(phydev, old_page, ret); +} + +/** + * yt8521_prepare_fiber_features() - A small helper function that setup + * fiber's features. + * @phydev: a pointer to a &struct phy_device + * @dst: a pointer to store fiber's features + */ +static void yt8521_prepare_fiber_features(struct phy_device *phydev, + unsigned long *dst) +{ + linkmode_set_bit(ETHTOOL_LINK_MODE_100baseFX_Full_BIT, dst); + linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, dst); + linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, dst); + linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, dst); +} + +/** + * yt8521_fiber_setup_forced - configures/forces speed from @phydev + * @phydev: target phy_device struct + * + * NOTE:The caller must have taken the MDIO bus lock. + * + * returns 0 or negative errno code + */ +static int yt8521_fiber_setup_forced(struct phy_device *phydev) +{ + u16 val; + int ret; + + if (phydev->speed == SPEED_1000) + val = YTPHY_MCR_FIBER_1000BX; + else if (phydev->speed == SPEED_100) + val = YTPHY_MCR_FIBER_100FX; + else + return -EINVAL; + + ret = __phy_modify(phydev, MII_BMCR, BMCR_ANENABLE, 0); + if (ret < 0) + return ret; + + /* disable Fiber auto sensing */ + ret = ytphy_modify_ext(phydev, YT8521_LINK_TIMER_CFG2_REG, + YT8521_LTCR_EN_AUTOSEN, 0); + if (ret < 0) + return ret; + + ret = ytphy_modify_ext(phydev, YTPHY_MISC_CONFIG_REG, + YTPHY_MCR_FIBER_SPEED_MASK, val); + if (ret < 0) + return ret; + + return ytphy_modify_ext(phydev, YT8521_CHIP_CONFIG_REG, + YT8521_CCR_SW_RST, 0); +} + +/** + * ytphy_check_and_restart_aneg - Enable and restart auto-negotiation + * @phydev: target phy_device struct + * @restart: whether aneg restart is requested + * + * NOTE:The caller must have taken the MDIO bus lock. + * + * returns 0 or negative errno code + */ +static int ytphy_check_and_restart_aneg(struct phy_device *phydev, bool restart) +{ + int ret; + + if (!restart) { + /* Advertisement hasn't changed, but maybe aneg was never on to + * begin with? Or maybe phy was isolated? + */ + ret = __phy_read(phydev, MII_BMCR); + if (ret < 0) + return ret; + + if (!(ret & BMCR_ANENABLE) || (ret & BMCR_ISOLATE)) + restart = true; + } + /* Enable and Restart Autonegotiation + * Don't isolate the PHY if we're negotiating + */ + if (restart) + return __phy_modify(phydev, MII_BMCR, BMCR_ISOLATE, + BMCR_ANENABLE | BMCR_ANRESTART); + + return 0; +} + +/** + * yt8521_fiber_config_aneg - restart auto-negotiation or write + * YTPHY_MISC_CONFIG_REG. + * @phydev: target phy_device struct + * + * NOTE:The caller must have taken the MDIO bus lock. + * + * returns 0 or negative errno code + */ +static int yt8521_fiber_config_aneg(struct phy_device *phydev) +{ + int err, changed = 0; + int bmcr; + u16 adv; + + if (phydev->autoneg != AUTONEG_ENABLE) + return yt8521_fiber_setup_forced(phydev); + + /* enable Fiber auto sensing */ + err = ytphy_modify_ext(phydev, YT8521_LINK_TIMER_CFG2_REG, + 0, YT8521_LTCR_EN_AUTOSEN); + if (err < 0) + return err; + + err = ytphy_modify_ext(phydev, YT8521_CHIP_CONFIG_REG, + YT8521_CCR_SW_RST, 0); + if (err < 0) + return err; + + bmcr = __phy_read(phydev, MII_BMCR); + if (bmcr < 0) + return bmcr; + + /* When it is coming from fiber forced mode, add bmcr power down + * and power up to let aneg work fine. + */ + if (!(bmcr & BMCR_ANENABLE)) { + __phy_modify(phydev, MII_BMCR, 0, BMCR_PDOWN); + usleep_range(1000, 1100); + __phy_modify(phydev, MII_BMCR, BMCR_PDOWN, 0); + } + + adv = linkmode_adv_to_mii_adv_x(phydev->advertising, + ETHTOOL_LINK_MODE_1000baseX_Full_BIT); + + /* Setup fiber advertisement */ + err = __phy_modify_changed(phydev, MII_ADVERTISE, + ADVERTISE_1000XHALF | ADVERTISE_1000XFULL | + ADVERTISE_1000XPAUSE | + ADVERTISE_1000XPSE_ASYM, + adv); + if (err < 0) + return err; + + if (err > 0) + changed = 1; + + return ytphy_check_and_restart_aneg(phydev, changed); +} + +/** + * ytphy_setup_master_slave + * @phydev: target phy_device struct + * + * NOTE: The caller must have taken the MDIO bus lock. + * + * returns 0 or negative errno code + */ +static int ytphy_setup_master_slave(struct phy_device *phydev) +{ + u16 ctl = 0; + + if (!phydev->is_gigabit_capable) + return 0; + + switch (phydev->master_slave_set) { + case MASTER_SLAVE_CFG_MASTER_PREFERRED: + ctl |= CTL1000_PREFER_MASTER; + break; + case MASTER_SLAVE_CFG_SLAVE_PREFERRED: + break; + case MASTER_SLAVE_CFG_MASTER_FORCE: + ctl |= CTL1000_AS_MASTER; + fallthrough; + case MASTER_SLAVE_CFG_SLAVE_FORCE: + ctl |= CTL1000_ENABLE_MASTER; + break; + case MASTER_SLAVE_CFG_UNKNOWN: + case MASTER_SLAVE_CFG_UNSUPPORTED: + return 0; + default: + phydev_warn(phydev, "Unsupported Master/Slave mode\n"); + return -EOPNOTSUPP; + } + + return __phy_modify_changed(phydev, MII_CTRL1000, + (CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER | + CTL1000_PREFER_MASTER), ctl); +} + +/** + * ytphy_utp_config_advert - sanitize and advertise auto-negotiation parameters + * @phydev: target phy_device struct + * + * NOTE: Writes MII_ADVERTISE with the appropriate values, + * after sanitizing the values to make sure we only advertise + * what is supported. Returns < 0 on error, 0 if the PHY's advertisement + * hasn't changed, and > 0 if it has changed. + * The caller must have taken the MDIO bus lock. + * + * returns 0 or negative errno code + */ +static int ytphy_utp_config_advert(struct phy_device *phydev) +{ + int err, bmsr, changed = 0; + u32 adv; + + /* Only allow advertising what this PHY supports */ + linkmode_and(phydev->advertising, phydev->advertising, + phydev->supported); + + adv = linkmode_adv_to_mii_adv_t(phydev->advertising); + + /* Setup standard advertisement */ + err = __phy_modify_changed(phydev, MII_ADVERTISE, + ADVERTISE_ALL | ADVERTISE_100BASE4 | + ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM, + adv); + if (err < 0) + return err; + if (err > 0) + changed = 1; + + bmsr = __phy_read(phydev, MII_BMSR); + if (bmsr < 0) + return bmsr; + + /* Per 802.3-2008, Section 22.2.4.2.16 Extended status all + * 1000Mbits/sec capable PHYs shall have the BMSR_ESTATEN bit set to a + * logical 1. + */ + if (!(bmsr & BMSR_ESTATEN)) + return changed; + + adv = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising); + + err = __phy_modify_changed(phydev, MII_CTRL1000, + ADVERTISE_1000FULL | ADVERTISE_1000HALF, + adv); + if (err < 0) + return err; + if (err > 0) + changed = 1; + + return changed; +} + +/** + * ytphy_utp_config_aneg - restart auto-negotiation or write BMCR + * @phydev: target phy_device struct + * @changed: whether autoneg is requested + * + * NOTE: If auto-negotiation is enabled, we configure the + * advertising, and then restart auto-negotiation. If it is not + * enabled, then we write the BMCR. + * The caller must have taken the MDIO bus lock. + * + * returns 0 or negative errno code + */ +static int ytphy_utp_config_aneg(struct phy_device *phydev, bool changed) +{ + int err; + u16 ctl; + + err = ytphy_setup_master_slave(phydev); + if (err < 0) + return err; + else if (err) + changed = true; + + if (phydev->autoneg != AUTONEG_ENABLE) { + /* configures/forces speed/duplex from @phydev */ + + ctl = mii_bmcr_encode_fixed(phydev->speed, phydev->duplex); + + return __phy_modify(phydev, MII_BMCR, ~(BMCR_LOOPBACK | + BMCR_ISOLATE | BMCR_PDOWN), ctl); + } + + err = ytphy_utp_config_advert(phydev); + if (err < 0) /* error */ + return err; + else if (err) + changed = true; + + return ytphy_check_and_restart_aneg(phydev, changed); +} + +/** + * yt8521_config_aneg_paged() - switch reg space then call genphy_config_aneg + * of one page + * @phydev: a pointer to a &struct phy_device + * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to + * operate. + * + * returns 0 or negative errno code + */ +static int yt8521_config_aneg_paged(struct phy_device *phydev, int page) +{ + __ETHTOOL_DECLARE_LINK_MODE_MASK(fiber_supported); + struct yt8521_priv *priv = phydev->priv; + int old_page; + int ret = 0; + + page &= YT8521_RSSR_SPACE_MASK; + + old_page = phy_select_page(phydev, page); + if (old_page < 0) + goto err_restore_page; + + /* If reg_page is YT8521_RSSR_TO_BE_ARBITRATED, + * phydev->advertising should be updated. + */ + if (priv->reg_page == YT8521_RSSR_TO_BE_ARBITRATED) { + linkmode_zero(fiber_supported); + yt8521_prepare_fiber_features(phydev, fiber_supported); + + /* prepare fiber_supported, then setup advertising. */ + if (page == YT8521_RSSR_FIBER_SPACE) { + linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, + fiber_supported); + linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, + fiber_supported); + linkmode_and(phydev->advertising, + priv->combo_advertising, fiber_supported); + } else { + /* ETHTOOL_LINK_MODE_Autoneg_BIT is also used in utp */ + linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, + fiber_supported); + linkmode_andnot(phydev->advertising, + priv->combo_advertising, + fiber_supported); + } + } + + if (page == YT8521_RSSR_FIBER_SPACE) + ret = yt8521_fiber_config_aneg(phydev); + else + ret = ytphy_utp_config_aneg(phydev, false); + +err_restore_page: + return phy_restore_page(phydev, old_page, ret); +} + +/** + * yt8521_config_aneg() - change reg space then call yt8521_config_aneg_paged + * @phydev: a pointer to a &struct phy_device + * + * returns 0 or negative errno code + */ +static int yt8521_config_aneg(struct phy_device *phydev) +{ + struct yt8521_priv *priv = phydev->priv; + int ret; + + if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) { + ret = yt8521_config_aneg_paged(phydev, priv->reg_page); + if (ret < 0) + return ret; + } else { + /* If reg_page is YT8521_RSSR_TO_BE_ARBITRATED, + * phydev->advertising need to be saved at first run. + * Because it contains the advertising which supported by both + * mac and yt8521(utp and fiber). + */ + if (linkmode_empty(priv->combo_advertising)) { + linkmode_copy(priv->combo_advertising, + phydev->advertising); + } + + ret = yt8521_config_aneg_paged(phydev, YT8521_RSSR_UTP_SPACE); + if (ret < 0) + return ret; + + ret = yt8521_config_aneg_paged(phydev, YT8521_RSSR_FIBER_SPACE); + if (ret < 0) + return ret; + + /* we don't known which will be link, so restore + * phydev->advertising as default value. + */ + linkmode_copy(phydev->advertising, priv->combo_advertising); + } + return 0; +} + +/** + * yt8521_aneg_done_paged() - determines the auto negotiation result of one + * page. + * @phydev: a pointer to a &struct phy_device + * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to + * operate. + * + * returns 0(no link)or 1(fiber or utp link) or negative errno code + */ +static int yt8521_aneg_done_paged(struct phy_device *phydev, int page) +{ + int old_page; + int ret = 0; + int link; + + old_page = phy_select_page(phydev, page & YT8521_RSSR_SPACE_MASK); + if (old_page < 0) + goto err_restore_page; + + ret = __phy_read(phydev, YTPHY_SPECIFIC_STATUS_REG); + if (ret < 0) + goto err_restore_page; + + link = !!(ret & YTPHY_SSR_LINK); + ret = link; + +err_restore_page: + return phy_restore_page(phydev, old_page, ret); +} + +/** + * yt8521_aneg_done() - determines the auto negotiation result + * @phydev: a pointer to a &struct phy_device + * + * returns 0(no link)or 1(fiber or utp link) or negative errno code + */ +static int yt8521_aneg_done(struct phy_device *phydev) +{ + struct yt8521_priv *priv = phydev->priv; + int link_fiber = 0; + int link_utp; + int link; + + if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) { + link = yt8521_aneg_done_paged(phydev, priv->reg_page); + } else { + link_utp = yt8521_aneg_done_paged(phydev, + YT8521_RSSR_UTP_SPACE); + if (link_utp < 0) + return link_utp; + + if (!link_utp) { + link_fiber = yt8521_aneg_done_paged(phydev, + YT8521_RSSR_FIBER_SPACE); + if (link_fiber < 0) + return link_fiber; + } + link = link_fiber || link_utp; + phydev_info(phydev, "%s, link_fiber: %d, link_utp: %d\n", + __func__, link_fiber, link_utp); + } + + return link; +} + +/** + * ytphy_utp_read_abilities - read PHY abilities from Clause 22 registers + * @phydev: target phy_device struct + * + * NOTE: Reads the PHY's abilities and populates + * phydev->supported accordingly. + * The caller must have taken the MDIO bus lock. + * + * returns 0 or negative errno code + */ +static int ytphy_utp_read_abilities(struct phy_device *phydev) +{ + int val; + + linkmode_set_bit_array(phy_basic_ports_array, + ARRAY_SIZE(phy_basic_ports_array), + phydev->supported); + + val = __phy_read(phydev, MII_BMSR); + if (val < 0) + return val; + + linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported, + val & BMSR_ANEGCAPABLE); + + linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, phydev->supported, + val & BMSR_100FULL); + linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, phydev->supported, + val & BMSR_100HALF); + linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, phydev->supported, + val & BMSR_10FULL); + linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, phydev->supported, + val & BMSR_10HALF); + + if (val & BMSR_ESTATEN) { + val = __phy_read(phydev, MII_ESTATUS); + if (val < 0) + return val; + + linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, + phydev->supported, val & ESTATUS_1000_TFULL); + linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, + phydev->supported, val & ESTATUS_1000_THALF); + linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, + phydev->supported, val & ESTATUS_1000_XFULL); + } + + return 0; +} + +/** + * yt8521_get_features_paged() - read supported link modes for one page + * @phydev: a pointer to a &struct phy_device + * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to + * operate. + * + * returns 0 or negative errno code + */ +static int yt8521_get_features_paged(struct phy_device *phydev, int page) +{ + int old_page; + int ret = 0; + + page &= YT8521_RSSR_SPACE_MASK; + old_page = phy_select_page(phydev, page); + if (old_page < 0) + goto err_restore_page; + + if (page == YT8521_RSSR_FIBER_SPACE) { + linkmode_zero(phydev->supported); + yt8521_prepare_fiber_features(phydev, phydev->supported); + } else { + ret = ytphy_utp_read_abilities(phydev); + if (ret < 0) + goto err_restore_page; + } + +err_restore_page: + return phy_restore_page(phydev, old_page, ret); +} + +/** + * yt8521_get_features - switch reg space then call yt8521_get_features_paged + * @phydev: target phy_device struct + * + * returns 0 or negative errno code + */ +static int yt8521_get_features(struct phy_device *phydev) +{ + struct yt8521_priv *priv = phydev->priv; + int ret; + + if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) { + ret = yt8521_get_features_paged(phydev, priv->reg_page); + } else { + ret = yt8521_get_features_paged(phydev, + YT8521_RSSR_UTP_SPACE); + if (ret < 0) + return ret; + + /* add fiber's features to phydev->supported */ + yt8521_prepare_fiber_features(phydev, phydev->supported); + } + return ret; +} + static struct phy_driver motorcomm_phy_drvs[] = { { PHY_ID_MATCH_EXACT(PHY_ID_YT8511), @@ -121,16 +1733,35 @@ static struct phy_driver motorcomm_phy_drvs[] = { .read_page = yt8511_read_page, .write_page = yt8511_write_page, }, + { + PHY_ID_MATCH_EXACT(PHY_ID_YT8521), + .name = "YT8521 Gigabit Ethernet", + .get_features = yt8521_get_features, + .probe = yt8521_probe, + .read_page = yt8521_read_page, + .write_page = yt8521_write_page, + .get_wol = ytphy_get_wol, + .set_wol = ytphy_set_wol, + .config_aneg = yt8521_config_aneg, + .aneg_done = yt8521_aneg_done, + .config_init = yt8521_config_init, + .read_status = yt8521_read_status, + .soft_reset = yt8521_soft_reset, + .suspend = yt8521_suspend, + .resume = yt8521_resume, + }, }; module_phy_driver(motorcomm_phy_drvs); -MODULE_DESCRIPTION("Motorcomm PHY driver"); +MODULE_DESCRIPTION("Motorcomm 8511/8521 PHY driver"); MODULE_AUTHOR("Peter Geis"); +MODULE_AUTHOR("Frank"); MODULE_LICENSE("GPL"); static const struct mdio_device_id __maybe_unused motorcomm_tbl[] = { { PHY_ID_MATCH_EXACT(PHY_ID_YT8511) }, + { PHY_ID_MATCH_EXACT(PHY_ID_YT8521) }, { /* sentinal */ } }; |