diff options
Diffstat (limited to 'drivers/net/phy/micrel.c')
| -rw-r--r-- | drivers/net/phy/micrel.c | 17 |
1 files changed, 12 insertions, 5 deletions
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 54e0d75203da..7ec6f70d6a82 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -341,14 +341,19 @@ static int kszphy_config_init(struct phy_device *phydev) return kszphy_config_reset(phydev); } +static int ksz8041_fiber_mode(struct phy_device *phydev) +{ + struct device_node *of_node = phydev->mdio.dev.of_node; + + return of_property_read_bool(of_node, "micrel,fiber-mode"); +} + static int ksz8041_config_init(struct phy_device *phydev) { __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; - struct device_node *of_node = phydev->mdio.dev.of_node; - /* Limit supported and advertised modes in fiber mode */ - if (of_property_read_bool(of_node, "micrel,fiber-mode")) { + if (ksz8041_fiber_mode(phydev)) { phydev->dev_flags |= MICREL_PHY_FXEN; linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, mask); linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, mask); @@ -1176,6 +1181,9 @@ static int kszphy_probe(struct phy_device *phydev) } } + if (ksz8041_fiber_mode(phydev)) + phydev->port = PORT_FIBRE; + /* Support legacy board-file configuration */ if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) { priv->rmii_ref_clk_sel = true; @@ -1368,7 +1376,6 @@ static struct phy_driver ksphy_driver[] = { .driver_data = &ksz9021_type, .probe = kszphy_probe, .config_init = ksz9131_config_init, - .read_status = genphy_read_status, .config_intr = kszphy_config_intr, .handle_interrupt = kszphy_handle_interrupt, .get_sset_count = kszphy_get_sset_count, @@ -1389,7 +1396,7 @@ static struct phy_driver ksphy_driver[] = { }, { .phy_id = PHY_ID_KSZ886X, .phy_id_mask = MICREL_PHY_ID_MASK, - .name = "Micrel KSZ886X Switch", + .name = "Micrel KSZ8851 Ethernet MAC or KSZ886X Switch", /* PHY_BASIC_FEATURES */ .config_init = kszphy_config_init, .suspend = genphy_suspend, |