diff options
Diffstat (limited to 'drivers/net/ethernet/wangxun')
18 files changed, 2790 insertions, 25 deletions
diff --git a/drivers/net/ethernet/wangxun/Kconfig b/drivers/net/ethernet/wangxun/Kconfig index f5d43d8c9629..86310588c6c1 100644 --- a/drivers/net/ethernet/wangxun/Kconfig +++ b/drivers/net/ethernet/wangxun/Kconfig @@ -16,9 +16,15 @@ config NET_VENDOR_WANGXUN if NET_VENDOR_WANGXUN +config LIBWX + tristate + help + Common library for Wangxun(R) Ethernet drivers. + config NGBE tristate "Wangxun(R) GbE PCI Express adapters support" depends on PCI + select LIBWX help This driver supports Wangxun(R) GbE PCI Express family of adapters. @@ -32,6 +38,7 @@ config NGBE config TXGBE tristate "Wangxun(R) 10GbE PCI Express adapters support" depends on PCI + select LIBWX help This driver supports Wangxun(R) 10GbE PCI Express family of adapters. diff --git a/drivers/net/ethernet/wangxun/Makefile b/drivers/net/ethernet/wangxun/Makefile index ac3fb06b233c..ca19311dbe38 100644 --- a/drivers/net/ethernet/wangxun/Makefile +++ b/drivers/net/ethernet/wangxun/Makefile @@ -3,5 +3,6 @@ # Makefile for the Wangxun network device drivers. # +obj-$(CONFIG_LIBWX) += libwx/ obj-$(CONFIG_TXGBE) += txgbe/ obj-$(CONFIG_NGBE) += ngbe/ diff --git a/drivers/net/ethernet/wangxun/libwx/Makefile b/drivers/net/ethernet/wangxun/libwx/Makefile new file mode 100644 index 000000000000..1ed5e23af944 --- /dev/null +++ b/drivers/net/ethernet/wangxun/libwx/Makefile @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2015 - 2022 Beijing WangXun Technology Co., Ltd. +# + +obj-$(CONFIG_LIBWX) += libwx.o + +libwx-objs := wx_hw.o diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.c b/drivers/net/ethernet/wangxun/libwx/wx_hw.c new file mode 100644 index 000000000000..c57dc3238b3f --- /dev/null +++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.c @@ -0,0 +1,936 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2015 - 2022 Beijing WangXun Technology Co., Ltd. */ + +#include <linux/etherdevice.h> +#include <linux/if_ether.h> +#include <linux/iopoll.h> +#include <linux/pci.h> + +#include "wx_type.h" +#include "wx_hw.h" + +static void wx_intr_disable(struct wx_hw *wxhw, u64 qmask) +{ + u32 mask; + + mask = (qmask & 0xFFFFFFFF); + if (mask) + wr32(wxhw, WX_PX_IMS(0), mask); + + if (wxhw->mac.type == wx_mac_sp) { + mask = (qmask >> 32); + if (mask) + wr32(wxhw, WX_PX_IMS(1), mask); + } +} + +/* cmd_addr is used for some special command: + * 1. to be sector address, when implemented erase sector command + * 2. to be flash address when implemented read, write flash address + */ +static int wx_fmgr_cmd_op(struct wx_hw *wxhw, u32 cmd, u32 cmd_addr) +{ + u32 cmd_val = 0, val = 0; + + cmd_val = WX_SPI_CMD_CMD(cmd) | + WX_SPI_CMD_CLK(WX_SPI_CLK_DIV) | + cmd_addr; + wr32(wxhw, WX_SPI_CMD, cmd_val); + + return read_poll_timeout(rd32, val, (val & 0x1), 10, 100000, + false, wxhw, WX_SPI_STATUS); +} + +static int wx_flash_read_dword(struct wx_hw *wxhw, u32 addr, u32 *data) +{ + int ret = 0; + + ret = wx_fmgr_cmd_op(wxhw, WX_SPI_CMD_READ_DWORD, addr); + if (ret < 0) + return ret; + + *data = rd32(wxhw, WX_SPI_DATA); + + return ret; +} + +int wx_check_flash_load(struct wx_hw *hw, u32 check_bit) +{ + u32 reg = 0; + int err = 0; + + /* if there's flash existing */ + if (!(rd32(hw, WX_SPI_STATUS) & + WX_SPI_STATUS_FLASH_BYPASS)) { + /* wait hw load flash done */ + err = read_poll_timeout(rd32, reg, !(reg & check_bit), 20000, 2000000, + false, hw, WX_SPI_ILDR_STATUS); + if (err < 0) + wx_err(hw, "Check flash load timeout.\n"); + } + + return err; +} +EXPORT_SYMBOL(wx_check_flash_load); + +void wx_control_hw(struct wx_hw *wxhw, bool drv) +{ + if (drv) { + /* Let firmware know the driver has taken over */ + wr32m(wxhw, WX_CFG_PORT_CTL, + WX_CFG_PORT_CTL_DRV_LOAD, WX_CFG_PORT_CTL_DRV_LOAD); + } else { + /* Let firmware take over control of hw */ + wr32m(wxhw, WX_CFG_PORT_CTL, + WX_CFG_PORT_CTL_DRV_LOAD, 0); + } +} +EXPORT_SYMBOL(wx_control_hw); + +/** + * wx_mng_present - returns 0 when management capability is present + * @wxhw: pointer to hardware structure + */ +int wx_mng_present(struct wx_hw *wxhw) +{ + u32 fwsm; + + fwsm = rd32(wxhw, WX_MIS_ST); + if (fwsm & WX_MIS_ST_MNG_INIT_DN) + return 0; + else + return -EACCES; +} +EXPORT_SYMBOL(wx_mng_present); + +/* Software lock to be held while software semaphore is being accessed. */ +static DEFINE_MUTEX(wx_sw_sync_lock); + +/** + * wx_release_sw_sync - Release SW semaphore + * @wxhw: pointer to hardware structure + * @mask: Mask to specify which semaphore to release + * + * Releases the SW semaphore for the specified + * function (CSR, PHY0, PHY1, EEPROM, Flash) + **/ +static void wx_release_sw_sync(struct wx_hw *wxhw, u32 mask) +{ + mutex_lock(&wx_sw_sync_lock); + wr32m(wxhw, WX_MNG_SWFW_SYNC, mask, 0); + mutex_unlock(&wx_sw_sync_lock); +} + +/** + * wx_acquire_sw_sync - Acquire SW semaphore + * @wxhw: pointer to hardware structure + * @mask: Mask to specify which semaphore to acquire + * + * Acquires the SW semaphore for the specified + * function (CSR, PHY0, PHY1, EEPROM, Flash) + **/ +static int wx_acquire_sw_sync(struct wx_hw *wxhw, u32 mask) +{ + u32 sem = 0; + int ret = 0; + + mutex_lock(&wx_sw_sync_lock); + ret = read_poll_timeout(rd32, sem, !(sem & mask), + 5000, 2000000, false, wxhw, WX_MNG_SWFW_SYNC); + if (!ret) { + sem |= mask; + wr32(wxhw, WX_MNG_SWFW_SYNC, sem); + } else { + wx_err(wxhw, "SW Semaphore not granted: 0x%x.\n", sem); + } + mutex_unlock(&wx_sw_sync_lock); + + return ret; +} + +/** + * wx_host_interface_command - Issue command to manageability block + * @wxhw: pointer to the HW structure + * @buffer: contains the command to write and where the return status will + * be placed + * @length: length of buffer, must be multiple of 4 bytes + * @timeout: time in ms to wait for command completion + * @return_data: read and return data from the buffer (true) or not (false) + * Needed because FW structures are big endian and decoding of + * these fields can be 8 bit or 16 bit based on command. Decoding + * is not easily understood without making a table of commands. + * So we will leave this up to the caller to read back the data + * in these cases. + **/ +int wx_host_interface_command(struct wx_hw *wxhw, u32 *buffer, + u32 length, u32 timeout, bool return_data) +{ + u32 hdr_size = sizeof(struct wx_hic_hdr); + u32 hicr, i, bi, buf[64] = {}; + int status = 0; + u32 dword_len; + u16 buf_len; + + if (length == 0 || length > WX_HI_MAX_BLOCK_BYTE_LENGTH) { + wx_err(wxhw, "Buffer length failure buffersize=%d.\n", length); + return -EINVAL; + } + + status = wx_acquire_sw_sync(wxhw, WX_MNG_SWFW_SYNC_SW_MB); + if (status != 0) + return status; + + /* Calculate length in DWORDs. We must be DWORD aligned */ + if ((length % (sizeof(u32))) != 0) { + wx_err(wxhw, "Buffer length failure, not aligned to dword"); + status = -EINVAL; + goto rel_out; + } + + dword_len = length >> 2; + + /* The device driver writes the relevant command block + * into the ram area. + */ + for (i = 0; i < dword_len; i++) { + wr32a(wxhw, WX_MNG_MBOX, i, (__force u32)cpu_to_le32(buffer[i])); + /* write flush */ + buf[i] = rd32a(wxhw, WX_MNG_MBOX, i); + } + /* Setting this bit tells the ARC that a new command is pending. */ + wr32m(wxhw, WX_MNG_MBOX_CTL, + WX_MNG_MBOX_CTL_SWRDY, WX_MNG_MBOX_CTL_SWRDY); + + status = read_poll_timeout(rd32, hicr, hicr & WX_MNG_MBOX_CTL_FWRDY, 1000, + timeout * 1000, false, wxhw, WX_MNG_MBOX_CTL); + + /* Check command completion */ + if (status) { + wx_dbg(wxhw, "Command has failed with no status valid.\n"); + + buf[0] = rd32(wxhw, WX_MNG_MBOX); + if ((buffer[0] & 0xff) != (~buf[0] >> 24)) { + status = -EINVAL; + goto rel_out; + } + if ((buf[0] & 0xff0000) >> 16 == 0x80) { + wx_dbg(wxhw, "It's unknown cmd.\n"); + status = -EINVAL; + goto rel_out; + } + + wx_dbg(wxhw, "write value:\n"); + for (i = 0; i < dword_len; i++) + wx_dbg(wxhw, "%x ", buffer[i]); + wx_dbg(wxhw, "read value:\n"); + for (i = 0; i < dword_len; i++) + wx_dbg(wxhw, "%x ", buf[i]); + } + + if (!return_data) + goto rel_out; + + /* Calculate length in DWORDs */ + dword_len = hdr_size >> 2; + + /* first pull in the header so we know the buffer length */ + for (bi = 0; bi < dword_len; bi++) { + buffer[bi] = rd32a(wxhw, WX_MNG_MBOX, bi); + le32_to_cpus(&buffer[bi]); + } + + /* If there is any thing in data position pull it in */ + buf_len = ((struct wx_hic_hdr *)buffer)->buf_len; + if (buf_len == 0) + goto rel_out; + + if (length < buf_len + hdr_size) { + wx_err(wxhw, "Buffer not large enough for reply message.\n"); + status = -EFAULT; + goto rel_out; + } + + /* Calculate length in DWORDs, add 3 for odd lengths */ + dword_len = (buf_len + 3) >> 2; + + /* Pull in the rest of the buffer (bi is where we left off) */ + for (; bi <= dword_len; bi++) { + buffer[bi] = rd32a(wxhw, WX_MNG_MBOX, bi); + le32_to_cpus(&buffer[bi]); + } + +rel_out: + wx_release_sw_sync(wxhw, WX_MNG_SWFW_SYNC_SW_MB); + return status; +} +EXPORT_SYMBOL(wx_host_interface_command); + +/** + * wx_read_ee_hostif_data - Read EEPROM word using a host interface cmd + * assuming that the semaphore is already obtained. + * @wxhw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @data: word read from the EEPROM + * + * Reads a 16 bit word from the EEPROM using the hostif. + **/ +static int wx_read_ee_hostif_data(struct wx_hw *wxhw, u16 offset, u16 *data) +{ + struct wx_hic_read_shadow_ram buffer; + int status; + + buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD; + buffer.hdr.req.buf_lenh = 0; + buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN; + buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM; + + /* convert offset from words to bytes */ + buffer.address = (__force u32)cpu_to_be32(offset * 2); + /* one word */ + buffer.length = (__force u16)cpu_to_be16(sizeof(u16)); + + status = wx_host_interface_command(wxhw, (u32 *)&buffer, sizeof(buffer), + WX_HI_COMMAND_TIMEOUT, false); + + if (status != 0) + return status; + + *data = (u16)rd32a(wxhw, WX_MNG_MBOX, FW_NVM_DATA_OFFSET); + + return status; +} + +/** + * wx_read_ee_hostif - Read EEPROM word using a host interface cmd + * @wxhw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @data: word read from the EEPROM + * + * Reads a 16 bit word from the EEPROM using the hostif. + **/ +int wx_read_ee_hostif(struct wx_hw *wxhw, u16 offset, u16 *data) +{ + int status = 0; + + status = wx_acquire_sw_sync(wxhw, WX_MNG_SWFW_SYNC_SW_FLASH); + if (status == 0) { + status = wx_read_ee_hostif_data(wxhw, offset, data); + wx_release_sw_sync(wxhw, WX_MNG_SWFW_SYNC_SW_FLASH); + } + + return status; +} +EXPORT_SYMBOL(wx_read_ee_hostif); + +/** + * wx_read_ee_hostif_buffer- Read EEPROM word(s) using hostif + * @wxhw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @words: number of words + * @data: word(s) read from the EEPROM + * + * Reads a 16 bit word(s) from the EEPROM using the hostif. + **/ +int wx_read_ee_hostif_buffer(struct wx_hw *wxhw, + u16 offset, u16 words, u16 *data) +{ + struct wx_hic_read_shadow_ram buffer; + u32 current_word = 0; + u16 words_to_read; + u32 value = 0; + int status; + u32 i; + + /* Take semaphore for the entire operation. */ + status = wx_acquire_sw_sync(wxhw, WX_MNG_SWFW_SYNC_SW_FLASH); + if (status != 0) + return status; + + while (words) { + if (words > FW_MAX_READ_BUFFER_SIZE / 2) + words_to_read = FW_MAX_READ_BUFFER_SIZE / 2; + else + words_to_read = words; + + buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD; + buffer.hdr.req.buf_lenh = 0; + buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN; + buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM; + + /* convert offset from words to bytes */ + buffer.address = (__force u32)cpu_to_be32((offset + current_word) * 2); + buffer.length = (__force u16)cpu_to_be16(words_to_read * 2); + + status = wx_host_interface_command(wxhw, (u32 *)&buffer, + sizeof(buffer), + WX_HI_COMMAND_TIMEOUT, + false); + + if (status != 0) { + wx_err(wxhw, "Host interface command failed\n"); + goto out; + } + + for (i = 0; i < words_to_read; i++) { + u32 reg = WX_MNG_MBOX + (FW_NVM_DATA_OFFSET << 2) + 2 * i; + + value = rd32(wxhw, reg); + data[current_word] = (u16)(value & 0xffff); + current_word++; + i++; + if (i < words_to_read) { + value >>= 16; + data[current_word] = (u16)(value & 0xffff); + current_word++; + } + } + words -= words_to_read; + } + +out: + wx_release_sw_sync(wxhw, WX_MNG_SWFW_SYNC_SW_FLASH); + return status; +} +EXPORT_SYMBOL(wx_read_ee_hostif_buffer); + +/** + * wx_calculate_checksum - Calculate checksum for buffer + * @buffer: pointer to EEPROM + * @length: size of EEPROM to calculate a checksum for + * Calculates the checksum for some buffer on a specified length. The + * checksum calculated is returned. + **/ +static u8 wx_calculate_checksum(u8 *buffer, u32 length) +{ + u8 sum = 0; + u32 i; + + if (!buffer) + return 0; + + for (i = 0; i < length; i++) + sum += buffer[i]; + + return (u8)(0 - sum); +} + +/** + * wx_reset_hostif - send reset cmd to fw + * @wxhw: pointer to hardware structure + * + * Sends reset cmd to firmware through the manageability + * block. + **/ +int wx_reset_hostif(struct wx_hw *wxhw) +{ + struct wx_hic_reset reset_cmd; + int ret_val = 0; + int i; + + reset_cmd.hdr.cmd = FW_RESET_CMD; + reset_cmd.hdr.buf_len = FW_RESET_LEN; + reset_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED; + reset_cmd.lan_id = wxhw->bus.func; + reset_cmd.reset_type = (u16)wxhw->reset_type; + reset_cmd.hdr.checksum = 0; + reset_cmd.hdr.checksum = wx_calculate_checksum((u8 *)&reset_cmd, + (FW_CEM_HDR_LEN + + reset_cmd.hdr.buf_len)); + + for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) { + ret_val = wx_host_interface_command(wxhw, (u32 *)&reset_cmd, + sizeof(reset_cmd), + WX_HI_COMMAND_TIMEOUT, + true); + if (ret_val != 0) + continue; + + if (reset_cmd.hdr.cmd_or_resp.ret_status == + FW_CEM_RESP_STATUS_SUCCESS) + ret_val = 0; + else + ret_val = -EFAULT; + + break; + } + + return ret_val; +} +EXPORT_SYMBOL(wx_reset_hostif); + +/** + * wx_init_eeprom_params - Initialize EEPROM params + * @wxhw: pointer to hardware structure + * + * Initializes the EEPROM parameters wx_eeprom_info within the + * wx_hw struct in order to set up EEPROM access. + **/ +void wx_init_eeprom_params(struct wx_hw *wxhw) +{ + struct wx_eeprom_info *eeprom = &wxhw->eeprom; + u16 eeprom_size; + u16 data = 0x80; + + if (eeprom->type == wx_eeprom_uninitialized) { + eeprom->semaphore_delay = 10; + eeprom->type = wx_eeprom_none; + + if (!(rd32(wxhw, WX_SPI_STATUS) & + WX_SPI_STATUS_FLASH_BYPASS)) { + eeprom->type = wx_flash; + + eeprom_size = 4096; + eeprom->word_size = eeprom_size >> 1; + + wx_dbg(wxhw, "Eeprom params: type = %d, size = %d\n", + eeprom->type, eeprom->word_size); + } + } + + if (wxhw->mac.type == wx_mac_sp) { + if (wx_read_ee_hostif(wxhw, WX_SW_REGION_PTR, &data)) { + wx_err(wxhw, "NVM Read Error\n"); + return; + } + data = data >> 1; + } + + eeprom->sw_region_offset = data; +} +EXPORT_SYMBOL(wx_init_eeprom_params); + +/** + * wx_get_mac_addr - Generic get MAC address + * @wxhw: pointer to hardware structure + * @mac_addr: Adapter MAC address + * + * Reads the adapter's MAC address from first Receive Address Register (RAR0) + * A reset of the adapter must be performed prior to calling this function + * in order for the MAC address to have been loaded from the EEPROM into RAR0 + **/ +void wx_get_mac_addr(struct wx_hw *wxhw, u8 *mac_addr) +{ + u32 rar_high; + u32 rar_low; + u16 i; + + wr32(wxhw, WX_PSR_MAC_SWC_IDX, 0); + rar_high = rd32(wxhw, WX_PSR_MAC_SWC_AD_H); + rar_low = rd32(wxhw, WX_PSR_MAC_SWC_AD_L); + + for (i = 0; i < 2; i++) + mac_addr[i] = (u8)(rar_high >> (1 - i) * 8); + + for (i = 0; i < 4; i++) + mac_addr[i + 2] = (u8)(rar_low >> (3 - i) * 8); +} +EXPORT_SYMBOL(wx_get_mac_addr); + +/** + * wx_set_rar - Set Rx address register + * @wxhw: pointer to hardware structure + * @index: Receive address register to write + * @addr: Address to put into receive address register + * @pools: VMDq "set" or "pool" index + * @enable_addr: set flag that address is active + * + * Puts an ethernet address into a receive address register. + **/ +int wx_set_rar(struct wx_hw *wxhw, u32 index, u8 *addr, u64 pools, + u32 enable_addr) +{ + u32 rar_entries = wxhw->mac.num_rar_entries; + u32 rar_low, rar_high; + + /* Make sure we are using a valid rar index range */ + if (index >= rar_entries) { + wx_err(wxhw, "RAR index %d is out of range.\n", index); + return -EINVAL; + } + + /* select the MAC address */ + wr32(wxhw, WX_PSR_MAC_SWC_IDX, index); + + /* setup VMDq pool mapping */ + wr32(wxhw, WX_PSR_MAC_SWC_VM_L, pools & 0xFFFFFFFF); + if (wxhw->mac.type == wx_mac_sp) + wr32(wxhw, WX_PSR_MAC_SWC_VM_H, pools >> 32); + + /* HW expects these in little endian so we reverse the byte + * order from network order (big endian) to little endian + * + * Some parts put the VMDq setting in the extra RAH bits, + * so save everything except the lower 16 bits that hold part + * of the address and the address valid bit. + */ + rar_low = ((u32)addr[5] | + ((u32)addr[4] << 8) | + ((u32)addr[3] << 16) | + ((u32)addr[2] << 24)); + rar_high = ((u32)addr[1] | + ((u32)addr[0] << 8)); + if (enable_addr != 0) + rar_high |= WX_PSR_MAC_SWC_AD_H_AV; + + wr32(wxhw, WX_PSR_MAC_SWC_AD_L, rar_low); + wr32m(wxhw, WX_PSR_MAC_SWC_AD_H, + (WX_PSR_MAC_SWC_AD_H_AD(~0) | + WX_PSR_MAC_SWC_AD_H_ADTYPE(~0) | + WX_PSR_MAC_SWC_AD_H_AV), + rar_high); + + return 0; +} +EXPORT_SYMBOL(wx_set_rar); + +/** + * wx_clear_rar - Remove Rx address register + * @wxhw: pointer to hardware structure + * @index: Receive address register to write + * + * Clears an ethernet address from a receive address register. + **/ +int wx_clear_rar(struct wx_hw *wxhw, u32 index) +{ + u32 rar_entries = wxhw->mac.num_rar_entries; + + /* Make sure we are using a valid rar index range */ + if (index >= rar_entries) { + wx_err(wxhw, "RAR index %d is out of range.\n", index); + return -EINVAL; + } + + /* Some parts put the VMDq setting in the extra RAH bits, + * so save everything except the lower 16 bits that hold part + * of the address and the address valid bit. + */ + wr32(wxhw, WX_PSR_MAC_SWC_IDX, index); + + wr32(wxhw, WX_PSR_MAC_SWC_VM_L, 0); + wr32(wxhw, WX_PSR_MAC_SWC_VM_H, 0); + + wr32(wxhw, WX_PSR_MAC_SWC_AD_L, 0); + wr32m(wxhw, WX_PSR_MAC_SWC_AD_H, + (WX_PSR_MAC_SWC_AD_H_AD(~0) | + WX_PSR_MAC_SWC_AD_H_ADTYPE(~0) | + WX_PSR_MAC_SWC_AD_H_AV), + 0); + + return 0; +} +EXPORT_SYMBOL(wx_clear_rar); + +/** + * wx_clear_vmdq - Disassociate a VMDq pool index from a rx address + * @wxhw: pointer to hardware struct + * @rar: receive address register index to disassociate + * @vmdq: VMDq pool index to remove from the rar + **/ +static int wx_clear_vmdq(struct wx_hw *wxhw, u32 rar, u32 __maybe_unused vmdq) +{ + u32 rar_entries = wxhw->mac.num_rar_entries; + u32 mpsar_lo, mpsar_hi; + + /* Make sure we are using a valid rar index range */ + if (rar >= rar_entries) { + wx_err(wxhw, "RAR index %d is out of range.\n", rar); + return -EINVAL; + } + + wr32(wxhw, WX_PSR_MAC_SWC_IDX, rar); + mpsar_lo = rd32(wxhw, WX_PSR_MAC_SWC_VM_L); + mpsar_hi = rd32(wxhw, WX_PSR_MAC_SWC_VM_H); + + if (!mpsar_lo && !mpsar_hi) + return 0; + + /* was that the last pool using this rar? */ + if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0) + wx_clear_rar(wxhw, rar); + + return 0; +} + +/** + * wx_init_uta_tables - Initialize the Unicast Table Array + * @wxhw: pointer to hardware structure + **/ +static void wx_init_uta_tables(struct wx_hw *wxhw) +{ + int i; + + wx_dbg(wxhw, " Clearing UTA\n"); + + for (i = 0; i < 128; i++) + wr32(wxhw, WX_PSR_UC_TBL(i), 0); +} + +/** + * wx_init_rx_addrs - Initializes receive address filters. + * @wxhw: pointer to hardware structure + * + * Places the MAC address in receive address register 0 and clears the rest + * of the receive address registers. Clears the multicast table. Assumes + * the receiver is in reset when the routine is called. + **/ +void wx_init_rx_addrs(struct wx_hw *wxhw) +{ + u32 rar_entries = wxhw->mac.num_rar_entries; + u32 psrctl; + int i; + + /* If the current mac address is valid, assume it is a software override + * to the permanent address. + * Otherwise, use the permanent address from the eeprom. + */ + if (!is_valid_ether_addr(wxhw->mac.addr)) { + /* Get the MAC address from the RAR0 for later reference */ + wx_get_mac_addr(wxhw, wxhw->mac.addr); + wx_dbg(wxhw, "Keeping Current RAR0 Addr = %pM\n", wxhw->mac.addr); + } else { + /* Setup the receive address. */ + wx_dbg(wxhw, "Overriding MAC Address in RAR[0]\n"); + wx_dbg(wxhw, "New MAC Addr = %pM\n", wxhw->mac.addr); + + wx_set_rar(wxhw, 0, wxhw->mac.addr, 0, WX_PSR_MAC_SWC_AD_H_AV); + + if (wxhw->mac.type == wx_mac_sp) { + /* clear VMDq pool/queue selection for RAR 0 */ + wx_clear_vmdq(wxhw, 0, WX_CLEAR_VMDQ_ALL); + } + } + + /* Zero out the other receive addresses. */ + wx_dbg(wxhw, "Clearing RAR[1-%d]\n", rar_entries - 1); + for (i = 1; i < rar_entries; i++) { + wr32(wxhw, WX_PSR_MAC_SWC_IDX, i); + wr32(wxhw, WX_PSR_MAC_SWC_AD_L, 0); + wr32(wxhw, WX_PSR_MAC_SWC_AD_H, 0); + } + + /* Clear the MTA */ + wxhw->addr_ctrl.mta_in_use = 0; + psrctl = rd32(wxhw, WX_PSR_CTL); + psrctl &= ~(WX_PSR_CTL_MO | WX_PSR_CTL_MFE); + psrctl |= wxhw->mac.mc_filter_type << WX_PSR_CTL_MO_SHIFT; + wr32(wxhw, WX_PSR_CTL, psrctl); + wx_dbg(wxhw, " Clearing MTA\n"); + for (i = 0; i < wxhw->mac.mcft_size; i++) + wr32(wxhw, WX_PSR_MC_TBL(i), 0); + + wx_init_uta_tables(wxhw); +} +EXPORT_SYMBOL(wx_init_rx_addrs); + +void wx_disable_rx(struct wx_hw *wxhw) +{ + u32 pfdtxgswc; + u32 rxctrl; + + rxctrl = rd32(wxhw, WX_RDB_PB_CTL); + if (rxctrl & WX_RDB_PB_CTL_RXEN) { + pfdtxgswc = rd32(wxhw, WX_PSR_CTL); + if (pfdtxgswc & WX_PSR_CTL_SW_EN) { + pfdtxgswc &= ~WX_PSR_CTL_SW_EN; + wr32(wxhw, WX_PSR_CTL, pfdtxgswc); + wxhw->mac.set_lben = true; + } else { + wxhw->mac.set_lben = false; + } + rxctrl &= ~WX_RDB_PB_CTL_RXEN; + wr32(wxhw, WX_RDB_PB_CTL, rxctrl); + + if (!(((wxhw->subsystem_device_id & WX_NCSI_MASK) == WX_NCSI_SUP) || + ((wxhw->subsystem_device_id & WX_WOL_MASK) == WX_WOL_SUP))) { + /* disable mac receiver */ + wr32m(wxhw, WX_MAC_RX_CFG, + WX_MAC_RX_CFG_RE, 0); + } + } +} +EXPORT_SYMBOL(wx_disable_rx); + +/** + * wx_disable_pcie_master - Disable PCI-express master access + * @wxhw: pointer to hardware structure + * + * Disables PCI-Express master access and verifies there are no pending + * requests. + **/ +int wx_disable_pcie_master(struct wx_hw *wxhw) +{ + int status = 0; + u32 val; + + /* Always set this bit to ensure any future transactions are blocked */ + pci_clear_master(wxhw->pdev); + + /* Exit if master requests are blocked */ + if (!(rd32(wxhw, WX_PX_TRANSACTION_PENDING))) + return 0; + + /* Poll for master request bit to clear */ + status = read_poll_timeout(rd32, val, !val, 100, WX_PCI_MASTER_DISABLE_TIMEOUT, + false, wxhw, WX_PX_TRANSACTION_PENDING); + if (status < 0) + wx_err(wxhw, "PCIe transaction pending bit did not clear.\n"); + + return status; +} +EXPORT_SYMBOL(wx_disable_pcie_master); + +/** + * wx_stop_adapter - Generic stop Tx/Rx units + * @wxhw: pointer to hardware structure + * + * Sets the adapter_stopped flag within wx_hw struct. Clears interrupts, + * disables transmit and receive units. The adapter_stopped flag is used by + * the shared code and drivers to determine if the adapter is in a stopped + * state and should not touch the hardware. + **/ +int wx_stop_adapter(struct wx_hw *wxhw) +{ + u16 i; + + /* Set the adapter_stopped flag so other driver functions stop touching + * the hardware + */ + wxhw->adapter_stopped = true; + + /* Disable the receive unit */ + wx_disable_rx(wxhw); + + /* Set interrupt mask to stop interrupts from being generated */ + wx_intr_disable(wxhw, WX_INTR_ALL); + + /* Clear any pending interrupts, flush previous writes */ + wr32(wxhw, WX_PX_MISC_IC, 0xffffffff); + wr32(wxhw, WX_BME_CTL, 0x3); + + /* Disable the transmit unit. Each queue must be disabled. */ + for (i = 0; i < wxhw->mac.max_tx_queues; i++) { + wr32m(wxhw, WX_PX_TR_CFG(i), + WX_PX_TR_CFG_SWFLSH | WX_PX_TR_CFG_ENABLE, + WX_PX_TR_CFG_SWFLSH); + } + + /* Disable the receive unit by stopping each queue */ + for (i = 0; i < wxhw->mac.max_rx_queues; i++) { + wr32m(wxhw, WX_PX_RR_CFG(i), + WX_PX_RR_CFG_RR_EN, 0); + } + + /* flush all queues disables */ + WX_WRITE_FLUSH(wxhw); + + /* Prevent the PCI-E bus from hanging by disabling PCI-E master + * access and verify no pending requests + */ + return wx_disable_pcie_master(wxhw); +} +EXPORT_SYMBOL(wx_stop_adapter); + +void wx_reset_misc(struct wx_hw *wxhw) +{ + int i; + + /* receive packets that size > 2048 */ + wr32m(wxhw, WX_MAC_RX_CFG, WX_MAC_RX_CFG_JE, WX_MAC_RX_CFG_JE); + + /* clear counters on read */ + wr32m(wxhw, WX_MMC_CONTROL, + WX_MMC_CONTROL_RSTONRD, WX_MMC_CONTROL_RSTONRD); + + wr32m(wxhw, WX_MAC_RX_FLOW_CTRL, + WX_MAC_RX_FLOW_CTRL_RFE, WX_MAC_RX_FLOW_CTRL_RFE); + + wr32(wxhw, WX_MAC_PKT_FLT, WX_MAC_PKT_FLT_PR); + + wr32m(wxhw, WX_MIS_RST_ST, + WX_MIS_RST_ST_RST_INIT, 0x1E00); + + /* errata 4: initialize mng flex tbl and wakeup flex tbl*/ + wr32(wxhw, WX_PSR_MNG_FLEX_SEL, 0); + for (i = 0; i < 16; i++) { + wr32(wxhw, WX_PSR_MNG_FLEX_DW_L(i), 0); + wr32(wxhw, WX_PSR_MNG_FLEX_DW_H(i), 0); + wr32(wxhw, WX_PSR_MNG_FLEX_MSK(i), 0); + } + wr32(wxhw, WX_PSR_LAN_FLEX_SEL, 0); + for (i = 0; i < 16; i++) { + wr32(wxhw, WX_PSR_LAN_FLEX_DW_L(i), 0); + wr32(wxhw, WX_PSR_LAN_FLEX_DW_H(i), 0); + wr32(wxhw, WX_PSR_LAN_FLEX_MSK(i), 0); + } + + /* set pause frame dst mac addr */ + wr32(wxhw, WX_RDB_PFCMACDAL, 0xC2000001); + wr32(wxhw, WX_RDB_PFCMACDAH, 0x0180); +} +EXPORT_SYMBOL(wx_reset_misc); + +/** + * wx_get_pcie_msix_counts - Gets MSI-X vector count + * @wxhw: pointer to hardware structure + * @msix_count: number of MSI interrupts that can be obtained + * @max_msix_count: number of MSI interrupts that mac need + * + * Read PCIe configuration space, and get the MSI-X vector count from + * the capabilities table. + **/ +int wx_get_pcie_msix_counts(struct wx_hw *wxhw, u16 *msix_count, u16 max_msix_count) +{ + struct pci_dev *pdev = wxhw->pdev; + struct device *dev = &pdev->dev; + int pos; + + *msix_count = 1; + pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX); + if (!pos) { + dev_err(dev, "Unable to find MSI-X Capabilities\n"); + return -EINVAL; + } + pci_read_config_word(pdev, + pos + PCI_MSIX_FLAGS, + msix_count); + *msix_count &= WX_PCIE_MSIX_TBL_SZ_MASK; + /* MSI-X count is zero-based in HW */ + *msix_count += 1; + + if (*msix_count > max_msix_count) + *msix_count = max_msix_count; + + return 0; +} +EXPORT_SYMBOL(wx_get_pcie_msix_counts); + +int wx_sw_init(struct wx_hw *wxhw) +{ + struct pci_dev *pdev = wxhw->pdev; + u32 ssid = 0; + int err = 0; + + wxhw->vendor_id = pdev->vendor; + wxhw->device_id = pdev->device; + wxhw->revision_id = pdev->revision; + wxhw->oem_svid = pdev->subsystem_vendor; + wxhw->oem_ssid = pdev->subsystem_device; + wxhw->bus.device = PCI_SLOT(pdev->devfn); + wxhw->bus.func = PCI_FUNC(pdev->devfn); + + if (wxhw->oem_svid == PCI_VENDOR_ID_WANGXUN) { + wxhw->subsystem_vendor_id = pdev->subsystem_vendor; + wxhw->subsystem_device_id = pdev->subsystem_device; + } else { + err = wx_flash_read_dword(wxhw, 0xfffdc, &ssid); + if (!err) + wxhw->subsystem_device_id = swab16((u16)ssid); + + return err; + } + + return 0; +} +EXPORT_SYMBOL(wx_sw_init); + +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.h b/drivers/net/ethernet/wangxun/libwx/wx_hw.h new file mode 100644 index 000000000000..a0652f5e9939 --- /dev/null +++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2015 - 2022 Beijing WangXun Technology Co., Ltd. */ + +#ifndef _WX_HW_H_ +#define _WX_HW_H_ + +int wx_check_flash_load(struct wx_hw *hw, u32 check_bit); +void wx_control_hw(struct wx_hw *wxhw, bool drv); +int wx_mng_present(struct wx_hw *wxhw); +int wx_host_interface_command(struct wx_hw *wxhw, u32 *buffer, + u32 length, u32 timeout, bool return_data); +int wx_read_ee_hostif(struct wx_hw *wxhw, u16 offset, u16 *data); +int wx_read_ee_hostif_buffer(struct wx_hw *wxhw, + u16 offset, u16 words, u16 *data); +int wx_reset_hostif(struct wx_hw *wxhw); +void wx_init_eeprom_params(struct wx_hw *wxhw); +void wx_get_mac_addr(struct wx_hw *wxhw, u8 *mac_addr); +int wx_set_rar(struct wx_hw *wxhw, u32 index, u8 *addr, u64 pools, u32 enable_addr); +int wx_clear_rar(struct wx_hw *wxhw, u32 index); +void wx_init_rx_addrs(struct wx_hw *wxhw); +void wx_disable_rx(struct wx_hw *wxhw); +int wx_disable_pcie_master(struct wx_hw *wxhw); +int wx_stop_adapter(struct wx_hw *wxhw); +void wx_reset_misc(struct wx_hw *wxhw); +int wx_get_pcie_msix_counts(struct wx_hw *wxhw, u16 *msix_count, u16 max_msix_count); +int wx_sw_init(struct wx_hw *wxhw); + +#endif /* _WX_HW_H_ */ diff --git a/drivers/net/ethernet/wangxun/libwx/wx_type.h b/drivers/net/ethernet/wangxun/libwx/wx_type.h new file mode 100644 index 000000000000..1cbeef8230bf --- /dev/null +++ b/drivers/net/ethernet/wangxun/libwx/wx_type.h @@ -0,0 +1,352 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2015 - 2022 Beijing WangXun Technology Co., Ltd. */ + +#ifndef _WX_TYPE_H_ +#define _WX_TYPE_H_ + +/* Vendor ID */ +#ifndef PCI_VENDOR_ID_WANGXUN +#define PCI_VENDOR_ID_WANGXUN 0x8088 +#endif + +#define WX_NCSI_SUP 0x8000 +#define WX_NCSI_MASK 0x8000 +#define WX_WOL_SUP 0x4000 +#define WX_WOL_MASK 0x4000 + +/* MSI-X capability fields masks */ +#define WX_PCIE_MSIX_TBL_SZ_MASK 0x7FF +#define WX_PCI_LINK_STATUS 0xB2 + +/**************** Global Registers ****************************/ +/* chip control Registers */ +#define WX_MIS_PWR 0x10000 +#define WX_MIS_RST 0x1000C +#define WX_MIS_RST_LAN_RST(_i) BIT((_i) + 1) +#define WX_MIS_RST_SW_RST BIT(0) +#define WX_MIS_ST 0x10028 +#define WX_MIS_ST_MNG_INIT_DN BIT(0) +#define WX_MIS_SWSM 0x1002C +#define WX_MIS_SWSM_SMBI BIT(0) +#define WX_MIS_RST_ST 0x10030 +#define WX_MIS_RST_ST_RST_INI_SHIFT 8 +#define WX_MIS_RST_ST_RST_INIT (0xFF << WX_MIS_RST_ST_RST_INI_SHIFT) + +/* FMGR Registers */ +#define WX_SPI_CMD 0x10104 +#define WX_SPI_CMD_READ_DWORD 0x1 +#define WX_SPI_CLK_DIV 0x3 +#define WX_SPI_CMD_CMD(_v) (((_v) & 0x7) << 28) +#define WX_SPI_CMD_CLK(_v) (((_v) & 0x7) << 25) +#define WX_SPI_CMD_ADDR(_v) (((_v) & 0xFFFFFF)) +#define WX_SPI_DATA 0x10108 +#define WX_SPI_DATA_BYPASS BIT(31) +#define WX_SPI_DATA_STATUS(_v) (((_v) & 0xFF) << 16) +#define WX_SPI_DATA_OP_DONE BIT(0) +#define WX_SPI_STATUS 0x1010C +#define WX_SPI_STATUS_OPDONE BIT(0) +#define WX_SPI_STATUS_FLASH_BYPASS BIT(31) +#define WX_SPI_ILDR_STATUS 0x10120 + +/* Sensors for PVT(Process Voltage Temperature) */ +#define WX_TS_EN 0x10304 +#define WX_TS_EN_ENA BIT(0) +#define WX_TS_ALARM_THRE 0x1030C +#define WX_TS_DALARM_THRE 0x10310 +#define WX_TS_INT_EN 0x10314 +#define WX_TS_INT_EN_DALARM_INT_EN BIT(1) +#define WX_TS_INT_EN_ALARM_INT_EN BIT(0) +#define WX_TS_ALARM_ST 0x10318 +#define WX_TS_ALARM_ST_DALARM BIT(1) +#define WX_TS_ALARM_ST_ALARM BIT(0) + +/************************* Port Registers ************************************/ +/* port cfg Registers */ +#define WX_CFG_PORT_CTL 0x14400 +#define WX_CFG_PORT_CTL_DRV_LOAD BIT(3) + +/*********************** Transmit DMA registers **************************/ +/* transmit global control */ +#define WX_TDM_CTL 0x18000 +/* TDM CTL BIT */ +#define WX_TDM_CTL_TE BIT(0) /* Transmit Enable */ + +/***************************** RDB registers *********************************/ +/* receive packet buffer */ +#define WX_RDB_PB_CTL 0x19000 +#define WX_RDB_PB_CTL_RXEN BIT(31) /* Enable Receiver */ +#define WX_RDB_PB_CTL_DISABLED BIT(0) +/* statistic */ +#define WX_RDB_PFCMACDAL 0x19210 +#define WX_RDB_PFCMACDAH 0x19214 + +/******************************* PSR Registers *******************************/ +/* psr control */ +#define WX_PSR_CTL 0x15000 +/* Header split receive */ +#define WX_PSR_CTL_SW_EN BIT(18) +#define WX_PSR_CTL_RSC_ACK BIT(17) +#define WX_PSR_CTL_RSC_DIS BIT(16) +#define WX_PSR_CTL_PCSD BIT(13) +#define WX_PSR_CTL_IPPCSE BIT(12) +#define WX_PSR_CTL_BAM BIT(10) +#define WX_PSR_CTL_UPE BIT(9) +#define WX_PSR_CTL_MPE BIT(8) +#define WX_PSR_CTL_MFE BIT(7) +#define WX_PSR_CTL_MO_SHIFT 5 +#define WX_PSR_CTL_MO (0x3 << WX_PSR_CTL_MO_SHIFT) +#define WX_PSR_CTL_TPE BIT(4) +/* mcasst/ucast overflow tbl */ +#define WX_PSR_MC_TBL(_i) (0x15200 + ((_i) * 4)) +#define WX_PSR_UC_TBL(_i) (0x15400 + ((_i) * 4)) + +/* Management */ +#define WX_PSR_MNG_FLEX_SEL 0x1582C +#define WX_PSR_MNG_FLEX_DW_L(_i) (0x15A00 + ((_i) * 16)) +#define WX_PSR_MNG_FLEX_DW_H(_i) (0x15A04 + ((_i) * 16)) +#define WX_PSR_MNG_FLEX_MSK(_i) (0x15A08 + ((_i) * 16)) +#define WX_PSR_LAN_FLEX_SEL 0x15B8C +#define WX_PSR_LAN_FLEX_DW_L(_i) (0x15C00 + ((_i) * 16)) +#define WX_PSR_LAN_FLEX_DW_H(_i) (0x15C04 + ((_i) * 16)) +#define WX_PSR_LAN_FLEX_MSK(_i) (0x15C08 + ((_i) * 16)) + +/* mac switcher */ +#define WX_PSR_MAC_SWC_AD_L 0x16200 +#define WX_PSR_MAC_SWC_AD_H 0x16204 +#define WX_PSR_MAC_SWC_AD_H_AD(v) (((v) & 0xFFFF)) +#define WX_PSR_MAC_SWC_AD_H_ADTYPE(v) (((v) & 0x1) << 30) +#define WX_PSR_MAC_SWC_AD_H_AV BIT(31) +#define WX_PSR_MAC_SWC_VM_L 0x16208 +#define WX_PSR_MAC_SWC_VM_H 0x1620C +#define WX_PSR_MAC_SWC_IDX 0x16210 +#define WX_CLEAR_VMDQ_ALL 0xFFFFFFFFU + +/************************************** MNG ********************************/ +#define WX_MNG_SWFW_SYNC 0x1E008 +#define WX_MNG_SWFW_SYNC_SW_MB BIT(2) +#define WX_MNG_SWFW_SYNC_SW_FLASH BIT(3) +#define WX_MNG_MBOX 0x1E100 +#define WX_MNG_MBOX_CTL 0x1E044 +#define WX_MNG_MBOX_CTL_SWRDY BIT(0) +#define WX_MNG_MBOX_CTL_FWRDY BIT(2) + +/************************************* ETH MAC *****************************/ +#define WX_MAC_TX_CFG 0x11000 +#define WX_MAC_TX_CFG_TE BIT(0) +#define WX_MAC_RX_CFG 0x11004 +#define WX_MAC_RX_CFG_RE BIT(0) +#define WX_MAC_RX_CFG_JE BIT(8) +#define WX_MAC_PKT_FLT 0x11008 +#define WX_MAC_PKT_FLT_PR BIT(0) /* promiscuous mode */ +#define WX_MAC_RX_FLOW_CTRL 0x11090 +#define WX_MAC_RX_FLOW_CTRL_RFE BIT(0) /* receive fc enable */ +#define WX_MMC_CONTROL 0x11800 +#define WX_MMC_CONTROL_RSTONRD BIT(2) /* reset on read */ + +/********************************* BAR registers ***************************/ +/* Interrupt Registers */ +#define WX_BME_CTL 0x12020 +#define WX_PX_MISC_IC 0x100 +#define WX_PX_IMS(_i) (0x140 + (_i) * 4) +#define WX_PX_TRANSACTION_PENDING 0x168 + +/* transmit DMA Registers */ +#define WX_PX_TR_CFG(_i) (0x03010 + ((_i) * 0x40)) +/* Transmit Config masks */ +#define WX_PX_TR_CFG_ENABLE BIT(0) /* Ena specific Tx Queue */ +#define WX_PX_TR_CFG_TR_SIZE_SHIFT 1 /* tx desc number per ring */ +#define WX_PX_TR_CFG_SWFLSH BIT(26) /* Tx Desc. wr-bk flushing */ +#define WX_PX_TR_CFG_WTHRESH_SHIFT 16 /* shift to WTHRESH bits */ +#define WX_PX_TR_CFG_THRE_SHIFT 8 + +/* Receive DMA Registers */ +#define WX_PX_RR_CFG(_i) (0x01010 + ((_i) * 0x40)) +/* PX_RR_CFG bit definitions */ +#define WX_PX_RR_CFG_RR_EN BIT(0) + +/* Number of 80 microseconds we wait for PCI Express master disable */ +#define WX_PCI_MASTER_DISABLE_TIMEOUT 80000 + +/****************** Manageablility Host Interface defines ********************/ +#define WX_HI_MAX_BLOCK_BYTE_LENGTH 256 /* Num of bytes in range */ +#define WX_HI_COMMAND_TIMEOUT 1000 /* Process HI command limit */ + +#define FW_READ_SHADOW_RAM_CMD 0x31 +#define FW_READ_SHADOW_RAM_LEN 0x6 +#define FW_DEFAULT_CHECKSUM 0xFF /* checksum always 0xFF */ +#define FW_NVM_DATA_OFFSET 3 +#define FW_MAX_READ_BUFFER_SIZE 244 +#define FW_RESET_CMD 0xDF +#define FW_RESET_LEN 0x2 +#define FW_CEM_HDR_LEN 0x4 +#define FW_CEM_CMD_RESERVED 0X0 +#define FW_CEM_MAX_RETRIES 3 +#define FW_CEM_RESP_STATUS_SUCCESS 0x1 + +#define WX_SW_REGION_PTR 0x1C + +/* Host Interface Command Structures */ +struct wx_hic_hdr { + u8 cmd; + u8 buf_len; + union { + u8 cmd_resv; + u8 ret_status; + } cmd_or_resp; + u8 checksum; +}; + +struct wx_hic_hdr2_req { + u8 cmd; + u8 buf_lenh; + u8 buf_lenl; + u8 checksum; +}; + +struct wx_hic_hdr2_rsp { + u8 cmd; + u8 buf_lenl; + u8 buf_lenh_status; /* 7-5: high bits of buf_len, 4-0: status */ + u8 checksum; +}; + +union wx_hic_hdr2 { + struct wx_hic_hdr2_req req; + struct wx_hic_hdr2_rsp rsp; +}; + +/* These need to be dword aligned */ +struct wx_hic_read_shadow_ram { + union wx_hic_hdr2 hdr; + u32 address; + u16 length; + u16 pad2; + u16 data; + u16 pad3; +}; + +struct wx_hic_reset { + struct wx_hic_hdr hdr; + u16 lan_id; + u16 reset_type; +}; + +/* Bus parameters */ +struct wx_bus_info { + u8 func; + u16 device; +}; + +struct wx_thermal_sensor_data { + s16 temp; + s16 alarm_thresh; + s16 dalarm_thresh; +}; + +enum wx_mac_type { + wx_mac_unknown = 0, + wx_mac_sp, + wx_mac_em +}; + +struct wx_mac_info { + enum wx_mac_type type; + bool set_lben; + u8 addr[ETH_ALEN]; + u8 perm_addr[ETH_ALEN]; + s32 mc_filter_type; + u32 mcft_size; + u32 num_rar_entries; + u32 max_tx_queues; + u32 max_rx_queues; + + u16 max_msix_vectors; + struct wx_thermal_sensor_data sensor; +}; + +enum wx_eeprom_type { + wx_eeprom_uninitialized = 0, + wx_eeprom_spi, + wx_flash, + wx_eeprom_none /* No NVM support */ +}; + +struct wx_eeprom_info { + enum wx_eeprom_type type; + u32 semaphore_delay; + u16 word_size; + u16 sw_region_offset; +}; + +struct wx_addr_filter_info { + u32 num_mc_addrs; + u32 mta_in_use; + bool user_set_promisc; +}; + +enum wx_reset_type { + WX_LAN_RESET = 0, + WX_SW_RESET, + WX_GLOBAL_RESET +}; + +struct wx_hw { + u8 __iomem *hw_addr; + struct pci_dev *pdev; + struct wx_bus_info bus; + struct wx_mac_info mac; + struct wx_eeprom_info eeprom; + struct wx_addr_filter_info addr_ctrl; + u16 device_id; + u16 vendor_id; + u16 subsystem_device_id; + u16 subsystem_vendor_id; + u8 revision_id; + u16 oem_ssid; + u16 oem_svid; + bool adapter_stopped; + enum wx_reset_type reset_type; +}; + +#define WX_INTR_ALL (~0ULL) + +/* register operations */ +#define wr32(a, reg, value) writel((value), ((a)->hw_addr + (reg))) +#define rd32(a, reg) readl((a)->hw_addr + (reg)) +#define rd32a(a, reg, offset) ( \ + rd32((a), (reg) + ((offset) << 2))) +#define wr32a(a, reg, off, val) \ + wr32((a), (reg) + ((off) << 2), (val)) + +static inline u32 +rd32m(struct wx_hw *wxhw, u32 reg, u32 mask) +{ + u32 val; + + val = rd32(wxhw, reg); + return val & mask; +} + +static inline void +wr32m(struct wx_hw *wxhw, u32 reg, u32 mask, u32 field) +{ + u32 val; + + val = rd32(wxhw, reg); + val = ((val & ~mask) | (field & mask)); + + wr32(wxhw, reg, val); +} + +/* On some domestic CPU platforms, sometimes IO is not synchronized with + * flushing memory, here use readl() to flush PCI read and write. + */ +#define WX_WRITE_FLUSH(H) rd32(H, WX_MIS_PWR) + +#define wx_err(wxhw, fmt, arg...) \ + dev_err(&(wxhw)->pdev->dev, fmt, ##arg) + +#define wx_dbg(wxhw, fmt, arg...) \ + dev_dbg(&(wxhw)->pdev->dev, fmt, ##arg) + +#endif /* _WX_TYPE_H_ */ diff --git a/drivers/net/ethernet/wangxun/ngbe/Makefile b/drivers/net/ethernet/wangxun/ngbe/Makefile index 0baf75907496..391c2cbc1bb4 100644 --- a/drivers/net/ethernet/wangxun/ngbe/Makefile +++ b/drivers/net/ethernet/wangxun/ngbe/Makefile @@ -6,4 +6,4 @@ obj-$(CONFIG_NGBE) += ngbe.o -ngbe-objs := ngbe_main.o +ngbe-objs := ngbe_main.o ngbe_hw.o diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe.h b/drivers/net/ethernet/wangxun/ngbe/ngbe.h index f5fa6e5238cc..af147ca8605c 100644 --- a/drivers/net/ethernet/wangxun/ngbe/ngbe.h +++ b/drivers/net/ethernet/wangxun/ngbe/ngbe.h @@ -11,12 +11,67 @@ #define NGBE_MAX_RX_QUEUES (NGBE_MAX_FDIR_INDICES + 1) #define NGBE_MAX_TX_QUEUES (NGBE_MAX_FDIR_INDICES + 1) +#define NGBE_ETH_LENGTH_OF_ADDRESS 6 +#define NGBE_MAX_MSIX_VECTORS 0x09 +#define NGBE_RAR_ENTRIES 32 + +/* TX/RX descriptor defines */ +#define NGBE_DEFAULT_TXD 512 /* default ring size */ +#define NGBE_DEFAULT_TX_WORK 256 +#define NGBE_MAX_TXD 8192 +#define NGBE_MIN_TXD 128 + +#define NGBE_DEFAULT_RXD 512 /* default ring size */ +#define NGBE_DEFAULT_RX_WORK 256 +#define NGBE_MAX_RXD 8192 +#define NGBE_MIN_RXD 128 + +#define NGBE_MAC_STATE_DEFAULT 0x1 +#define NGBE_MAC_STATE_MODIFIED 0x2 +#define NGBE_MAC_STATE_IN_USE 0x4 + +struct ngbe_mac_addr { + u8 addr[ETH_ALEN]; + u16 state; /* bitmask */ + u64 pools; +}; + /* board specific private data structure */ struct ngbe_adapter { u8 __iomem *io_addr; /* Mainly for iounmap use */ /* OS defined structs */ struct net_device *netdev; struct pci_dev *pdev; + + /* structs defined in ngbe_hw.h */ + struct ngbe_hw hw; + struct ngbe_mac_addr *mac_table; + u16 msg_enable; + + /* Tx fast path data */ + int num_tx_queues; + u16 tx_itr_setting; + u16 tx_work_limit; + + /* Rx fast path data */ + int num_rx_queues; + u16 rx_itr_setting; + u16 rx_work_limit; + + int num_q_vectors; /* current number of q_vectors for device */ + int max_q_vectors; /* upper limit of q_vectors for device */ + + u32 tx_ring_count; + u32 rx_ring_count; + +#define NGBE_MAX_RETA_ENTRIES 128 + u8 rss_indir_tbl[NGBE_MAX_RETA_ENTRIES]; + +#define NGBE_RSS_KEY_SIZE 40 /* size of RSS Hash Key in bytes */ + u32 *rss_key; + u32 wol; + + u16 bd_number; }; extern char ngbe_driver_name[]; diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_hw.c b/drivers/net/ethernet/wangxun/ngbe/ngbe_hw.c new file mode 100644 index 000000000000..0e3923b3737e --- /dev/null +++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_hw.c @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2019 - 2022 Beijing WangXun Technology Co., Ltd. */ + +#include <linux/etherdevice.h> +#include <linux/iopoll.h> +#include <linux/pci.h> + +#include "../libwx/wx_type.h" +#include "../libwx/wx_hw.h" +#include "ngbe_type.h" +#include "ngbe_hw.h" +#include "ngbe.h" + +int ngbe_eeprom_chksum_hostif(struct ngbe_hw *hw) +{ + struct wx_hic_read_shadow_ram buffer; + struct wx_hw *wxhw = &hw->wxhw; + int status; + int tmp; + + buffer.hdr.req.cmd = NGBE_FW_EEPROM_CHECKSUM_CMD; + buffer.hdr.req.buf_lenh = 0; + buffer.hdr.req.buf_lenl = 0; + buffer.hdr.req.checksum = NGBE_FW_CMD_DEFAULT_CHECKSUM; + /* convert offset from words to bytes */ + buffer.address = 0; + /* one word */ + buffer.length = 0; + + status = wx_host_interface_command(wxhw, (u32 *)&buffer, sizeof(buffer), + WX_HI_COMMAND_TIMEOUT, false); + + if (status < 0) + return status; + tmp = rd32a(wxhw, WX_MNG_MBOX, 1); + if (tmp == NGBE_FW_CMD_ST_PASS) + return 0; + return -EIO; +} + +static int ngbe_reset_misc(struct ngbe_hw *hw) +{ + struct wx_hw *wxhw = &hw->wxhw; + + wx_reset_misc(wxhw); + if (hw->mac_type == ngbe_mac_type_rgmii) + wr32(wxhw, NGBE_MDIO_CLAUSE_SELECT, 0xF); + if (hw->gpio_ctrl) { + /* gpio0 is used to power on/off control*/ + wr32(wxhw, NGBE_GPIO_DDR, 0x1); + wr32(wxhw, NGBE_GPIO_DR, NGBE_GPIO_DR_0); + } + return 0; +} + +/** + * ngbe_reset_hw - Perform hardware reset + * @hw: pointer to hardware structure + * + * Resets the hardware by resetting the transmit and receive units, masks + * and clears all interrupts, perform a PHY reset, and perform a link (MAC) + * reset. + **/ +int ngbe_reset_hw(struct ngbe_hw *hw) +{ + struct wx_hw *wxhw = &hw->wxhw; + int status = 0; + u32 reset = 0; + + /* Call adapter stop to disable tx/rx and clear interrupts */ + status = wx_stop_adapter(wxhw); + if (status != 0) + return status; + reset = WX_MIS_RST_LAN_RST(wxhw->bus.func); + wr32(wxhw, WX_MIS_RST, reset | rd32(wxhw, WX_MIS_RST)); + ngbe_reset_misc(hw); + + /* Store the permanent mac address */ + wx_get_mac_addr(wxhw, wxhw->mac.perm_addr); + + /* reset num_rar_entries to 128 */ + wxhw->mac.num_rar_entries = NGBE_RAR_ENTRIES; + wx_init_rx_addrs(wxhw); + pci_set_master(wxhw->pdev); + + return 0; +} diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_hw.h b/drivers/net/ethernet/wangxun/ngbe/ngbe_hw.h new file mode 100644 index 000000000000..42476a3fe57c --- /dev/null +++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_hw.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * WangXun Gigabit PCI Express Linux driver + * Copyright (c) 2019 - 2022 Beijing WangXun Technology Co., Ltd. + */ + +#ifndef _NGBE_HW_H_ +#define _NGBE_HW_H_ + +int ngbe_eeprom_chksum_hostif(struct ngbe_hw *hw); +int ngbe_reset_hw(struct ngbe_hw *hw); +#endif /* _NGBE_HW_H_ */ diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c b/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c index 7674cb6e5700..f0b24366da18 100644 --- a/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c +++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c @@ -8,7 +8,12 @@ #include <linux/string.h> #include <linux/aer.h> #include <linux/etherdevice.h> +#include <net/ip.h> +#include "../libwx/wx_type.h" +#include "../libwx/wx_hw.h" +#include "ngbe_type.h" +#include "ngbe_hw.h" #include "ngbe.h" char ngbe_driver_name[] = "ngbe"; @@ -34,6 +39,247 @@ static const struct pci_device_id ngbe_pci_tbl[] = { { .device = 0 } }; +static void ngbe_mac_set_default_filter(struct ngbe_adapter *adapter, u8 *addr) +{ + struct ngbe_hw *hw = &adapter->hw; + + memcpy(&adapter->mac_table[0].addr, addr, ETH_ALEN); + adapter->mac_table[0].pools = 1ULL; + adapter->mac_table[0].state = (NGBE_MAC_STATE_DEFAULT | + NGBE_MAC_STATE_IN_USE); + wx_set_rar(&hw->wxhw, 0, adapter->mac_table[0].addr, + adapter->mac_table[0].pools, + WX_PSR_MAC_SWC_AD_H_AV); +} + +/** + * ngbe_init_type_code - Initialize the shared code + * @hw: pointer to hardware structure + **/ +static void ngbe_init_type_code(struct ngbe_hw *hw) +{ + int wol_mask = 0, ncsi_mask = 0; + struct wx_hw *wxhw = &hw->wxhw; + u16 type_mask = 0; + + wxhw->mac.type = wx_mac_em; + type_mask = (u16)(wxhw->subsystem_device_id & NGBE_OEM_MASK); + ncsi_mask = wxhw->subsystem_device_id & NGBE_NCSI_MASK; + wol_mask = wxhw->subsystem_device_id & NGBE_WOL_MASK; + + switch (type_mask) { + case NGBE_SUBID_M88E1512_SFP: + case NGBE_SUBID_LY_M88E1512_SFP: + hw->phy.type = ngbe_phy_m88e1512_sfi; + break; + case NGBE_SUBID_M88E1512_RJ45: + hw->phy.type = ngbe_phy_m88e1512; + break; + case NGBE_SUBID_M88E1512_MIX: + hw->phy.type = ngbe_phy_m88e1512_unknown; + break; + case NGBE_SUBID_YT8521S_SFP: + case NGBE_SUBID_YT8521S_SFP_GPIO: + case NGBE_SUBID_LY_YT8521S_SFP: + hw->phy.type = ngbe_phy_yt8521s_sfi; + break; + case NGBE_SUBID_INTERNAL_YT8521S_SFP: + case NGBE_SUBID_INTERNAL_YT8521S_SFP_GPIO: + hw->phy.type = ngbe_phy_internal_yt8521s_sfi; + break; + case NGBE_SUBID_RGMII_FPGA: + case NGBE_SUBID_OCP_CARD: + fallthrough; + default: + hw->phy.type = ngbe_phy_internal; + break; + } + + if (hw->phy.type == ngbe_phy_internal || + hw->phy.type == ngbe_phy_internal_yt8521s_sfi) + hw->mac_type = ngbe_mac_type_mdi; + else + hw->mac_type = ngbe_mac_type_rgmii; + + hw->wol_enabled = (wol_mask == NGBE_WOL_SUP) ? 1 : 0; + hw->ncsi_enabled = (ncsi_mask == NGBE_NCSI_MASK || + type_mask == NGBE_SUBID_OCP_CARD) ? 1 : 0; + + switch (type_mask) { + case NGBE_SUBID_LY_YT8521S_SFP: + case NGBE_SUBID_LY_M88E1512_SFP: + case NGBE_SUBID_YT8521S_SFP_GPIO: + case NGBE_SUBID_INTERNAL_YT8521S_SFP_GPIO: + hw->gpio_ctrl = 1; + break; + default: + hw->gpio_ctrl = 0; + break; + } +} + +/** + * ngbe_init_rss_key - Initialize adapter RSS key + * @adapter: device handle + * + * Allocates and initializes the RSS key if it is not allocated. + **/ +static inline int ngbe_init_rss_key(struct ngbe_adapter *adapter) +{ + u32 *rss_key; + + if (!adapter->rss_key) { + rss_key = kzalloc(NGBE_RSS_KEY_SIZE, GFP_KERNEL); + if (unlikely(!rss_key)) + return -ENOMEM; + + netdev_rss_key_fill(rss_key, NGBE_RSS_KEY_SIZE); + adapter->rss_key = rss_key; + } + + return 0; +} + +/** + * ngbe_sw_init - Initialize general software structures + * @adapter: board private structure to initialize + **/ +static int ngbe_sw_init(struct ngbe_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + struct ngbe_hw *hw = &adapter->hw; + struct wx_hw *wxhw = &hw->wxhw; + u16 msix_count = 0; + int err = 0; + + wxhw->hw_addr = adapter->io_addr; + wxhw->pdev = pdev; + + /* PCI config space info */ + err = wx_sw_init(wxhw); + if (err < 0) { + netif_err(adapter, probe, adapter->netdev, + "Read of internal subsystem device id failed\n"); + return err; + } + + /* mac type, phy type , oem type */ + ngbe_init_type_code(hw); + + wxhw->mac.max_rx_queues = NGBE_MAX_RX_QUEUES; + wxhw->mac.max_tx_queues = NGBE_MAX_TX_QUEUES; + wxhw->mac.num_rar_entries = NGBE_RAR_ENTRIES; + /* Set common capability flags and settings */ + adapter->max_q_vectors = NGBE_MAX_MSIX_VECTORS; + + err = wx_get_pcie_msix_counts(wxhw, &msix_count, NGBE_MAX_MSIX_VECTORS); + if (err) + dev_err(&pdev->dev, "Do not support MSI-X\n"); + wxhw->mac.max_msix_vectors = msix_count; + + adapter->mac_table = kcalloc(wxhw->mac.num_rar_entries, + sizeof(struct ngbe_mac_addr), + GFP_KERNEL); + if (!adapter->mac_table) { + dev_err(&pdev->dev, "mac_table allocation failed: %d\n", err); + return -ENOMEM; + } + + if (ngbe_init_rss_key(adapter)) + return -ENOMEM; + + /* enable itr by default in dynamic mode */ + adapter->rx_itr_setting = 1; + adapter->tx_itr_setting = 1; + + /* set default ring sizes */ + adapter->tx_ring_count = NGBE_DEFAULT_TXD; + adapter->rx_ring_count = NGBE_DEFAULT_RXD; + + /* set default work limits */ + adapter->tx_work_limit = NGBE_DEFAULT_TX_WORK; + adapter->rx_work_limit = NGBE_DEFAULT_RX_WORK; + + return 0; +} + +static void ngbe_down(struct ngbe_adapter *adapter) +{ + netif_carrier_off(adapter->netdev); + netif_tx_disable(adapter->netdev); +}; + +/** + * ngbe_open - Called when a network interface is made active + * @netdev: network interface device structure + * + * Returns 0 on success, negative value on failure + * + * The open entry point is called when a network interface is made + * active by the system (IFF_UP). + **/ +static int ngbe_open(struct net_device *netdev) +{ + struct ngbe_adapter *adapter = netdev_priv(netdev); + struct ngbe_hw *hw = &adapter->hw; + struct wx_hw *wxhw = &hw->wxhw; + + wx_control_hw(wxhw, true); + + return 0; +} + +/** + * ngbe_close - Disables a network interface + * @netdev: network interface device structure + * + * Returns 0, this is not allowed to fail + * + * The close entry point is called when an interface is de-activated + * by the OS. The hardware is still under the drivers control, but + * needs to be disabled. A global MAC reset is issued to stop the + * hardware, and all transmit and receive resources are freed. + **/ +static int ngbe_close(struct net_device *netdev) +{ + struct ngbe_adapter *adapter = netdev_priv(netdev); + + ngbe_down(adapter); + wx_control_hw(&adapter->hw.wxhw, false); + + return 0; +} + +static netdev_tx_t ngbe_xmit_frame(struct sk_buff *skb, + struct net_device *netdev) +{ + return NETDEV_TX_OK; +} + +/** + * ngbe_set_mac - Change the Ethernet Address of the NIC + * @netdev: network interface device structure + * @p: pointer to an address structure + * + * Returns 0 on success, negative on failure + **/ +static int ngbe_set_mac(struct net_device *netdev, void *p) +{ + struct ngbe_adapter *adapter = netdev_priv(netdev); + struct wx_hw *wxhw = &adapter->hw.wxhw; + struct sockaddr *addr = p; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + eth_hw_addr_set(netdev, addr->sa_data); + memcpy(wxhw->mac.addr, addr->sa_data, netdev->addr_len); + + ngbe_mac_set_default_filter(adapter, wxhw->mac.addr); + + return 0; +} + static void ngbe_dev_shutdown(struct pci_dev *pdev, bool *enable_wake) { struct ngbe_adapter *adapter = pci_get_drvdata(pdev); @@ -41,13 +287,22 @@ static void ngbe_dev_shutdown(struct pci_dev *pdev, bool *enable_wake) netif_device_detach(netdev); + rtnl_lock(); + if (netif_running(netdev)) + ngbe_down(adapter); + rtnl_unlock(); + wx_control_hw(&adapter->hw.wxhw, false); + pci_disable_device(pdev); } static void ngbe_shutdown(struct pci_dev *pdev) { + struct ngbe_adapter *adapter = pci_get_drvdata(pdev); bool wake; + wake = !!adapter->wol; + ngbe_dev_shutdown(pdev, &wake); if (system_state == SYSTEM_POWER_OFF) { @@ -56,6 +311,14 @@ static void ngbe_shutdown(struct pci_dev *pdev) } } +static const struct net_device_ops ngbe_netdev_ops = { + .ndo_open = ngbe_open, + .ndo_stop = ngbe_close, + .ndo_start_xmit = ngbe_xmit_frame, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = ngbe_set_mac, +}; + /** * ngbe_probe - Device Initialization Routine * @pdev: PCI device information struct @@ -71,7 +334,14 @@ static int ngbe_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent) { struct ngbe_adapter *adapter = NULL; + struct ngbe_hw *hw = NULL; + struct wx_hw *wxhw = NULL; struct net_device *netdev; + u32 e2rom_cksum_cap = 0; + static int func_nums; + u16 e2rom_ver = 0; + u32 etrack_id = 0; + u32 saved_ver = 0; int err; err = pci_enable_device_mem(pdev); @@ -111,6 +381,9 @@ static int ngbe_probe(struct pci_dev *pdev, adapter = netdev_priv(netdev); adapter->netdev = netdev; adapter->pdev = pdev; + hw = &adapter->hw; + wxhw = &hw->wxhw; + adapter->msg_enable = BIT(3) - 1; adapter->io_addr = devm_ioremap(&pdev->dev, pci_resource_start(pdev, 0), @@ -120,12 +393,101 @@ static int ngbe_probe(struct pci_dev *pdev, goto err_pci_release_regions; } + netdev->netdev_ops = &ngbe_netdev_ops; + netdev->features |= NETIF_F_HIGHDMA; + adapter->bd_number = func_nums; + /* setup the private structure */ + err = ngbe_sw_init(adapter); + if (err) + goto err_free_mac_table; + + /* check if flash load is done after hw power up */ + err = wx_check_flash_load(wxhw, NGBE_SPI_ILDR_STATUS_PERST); + if (err) + goto err_free_mac_table; + err = wx_check_flash_load(wxhw, NGBE_SPI_ILDR_STATUS_PWRRST); + if (err) + goto err_free_mac_table; + + err = wx_mng_present(wxhw); + if (err) { + dev_err(&pdev->dev, "Management capability is not present\n"); + goto err_free_mac_table; + } + + err = ngbe_reset_hw(hw); + if (err) { + dev_err(&pdev->dev, "HW Init failed: %d\n", err); + goto err_free_mac_table; + } + + if (wxhw->bus.func == 0) { + wr32(wxhw, NGBE_CALSUM_CAP_STATUS, 0x0); + wr32(wxhw, NGBE_EEPROM_VERSION_STORE_REG, 0x0); + } else { + e2rom_cksum_cap = rd32(wxhw, NGBE_CALSUM_CAP_STATUS); + saved_ver = rd32(wxhw, NGBE_EEPROM_VERSION_STORE_REG); + } + + wx_init_eeprom_params(wxhw); + if (wxhw->bus.func == 0 || e2rom_cksum_cap == 0) { + /* make sure the EEPROM is ready */ + err = ngbe_eeprom_chksum_hostif(hw); + if (err) { + dev_err(&pdev->dev, "The EEPROM Checksum Is Not Valid\n"); + err = -EIO; + goto err_free_mac_table; + } + } + + adapter->wol = 0; + if (hw->wol_enabled) + adapter->wol = NGBE_PSR_WKUP_CTL_MAG; + + hw->wol_enabled = !!(adapter->wol); + wr32(wxhw, NGBE_PSR_WKUP_CTL, adapter->wol); + + device_set_wakeup_enable(&pdev->dev, adapter->wol); + + /* Save off EEPROM version number and Option Rom version which + * together make a unique identify for the eeprom + */ + if (saved_ver) { + etrack_id = saved_ver; + } else { + wx_read_ee_hostif(wxhw, + wxhw->eeprom.sw_region_offset + NGBE_EEPROM_VERSION_H, + &e2rom_ver); + etrack_id = e2rom_ver << 16; + wx_read_ee_hostif(wxhw, + wxhw->eeprom.sw_region_offset + NGBE_EEPROM_VERSION_L, + &e2rom_ver); + etrack_id |= e2rom_ver; + wr32(wxhw, NGBE_EEPROM_VERSION_STORE_REG, etrack_id); + } + + eth_hw_addr_set(netdev, wxhw->mac.perm_addr); + ngbe_mac_set_default_filter(adapter, wxhw->mac.perm_addr); + + err = register_netdev(netdev); + if (err) + goto err_register; + pci_set_drvdata(pdev, adapter); + netif_info(adapter, probe, netdev, + "PHY: %s, PBA No: Wang Xun GbE Family Controller\n", + hw->phy.type == ngbe_phy_internal ? "Internal" : "External"); + netif_info(adapter, probe, netdev, "%pM\n", netdev->dev_addr); + return 0; +err_register: + wx_control_hw(wxhw, false); +err_free_mac_table: + kfree(adapter->mac_table); err_pci_release_regions: pci_disable_pcie_error_reporting(pdev); pci_release_selected_regions(pdev, @@ -146,9 +508,15 @@ err_pci_disable_dev: **/ static void ngbe_remove(struct pci_dev *pdev) { + struct ngbe_adapter *adapter = pci_get_drvdata(pdev); + struct net_device *netdev; + + netdev = adapter->netdev; + unregister_netdev(netdev); pci_release_selected_regions(pdev, pci_select_bars(pdev, IORESOURCE_MEM)); + kfree(adapter->mac_table); pci_disable_pcie_error_reporting(pdev); pci_disable_device(pdev); diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h b/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h index 26e776c3539a..39f6c03f1a54 100644 --- a/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h +++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h @@ -8,11 +8,6 @@ #include <linux/netdevice.h> /************ NGBE_register.h ************/ -/* Vendor ID */ -#ifndef PCI_VENDOR_ID_WANGXUN -#define PCI_VENDOR_ID_WANGXUN 0x8088 -#endif - /* Device IDs */ #define NGBE_DEV_ID_EM_WX1860AL_W 0x0100 #define NGBE_DEV_ID_EM_WX1860A2 0x0101 @@ -47,4 +42,98 @@ #define NGBE_WOL_SUP 0x4000 #define NGBE_WOL_MASK 0x4000 +/**************** EM Registers ****************************/ +/* chip control Registers */ +#define NGBE_MIS_PRB_CTL 0x10010 +/* FMGR Registers */ +#define NGBE_SPI_ILDR_STATUS 0x10120 +#define NGBE_SPI_ILDR_STATUS_PERST BIT(0) /* PCIE_PERST is done */ +#define NGBE_SPI_ILDR_STATUS_PWRRST BIT(1) /* Power on reset is done */ +#define NGBE_SPI_ILDR_STATUS_LAN_SW_RST(_i) BIT((_i) + 9) /* lan soft reset done */ + +/* Checksum and EEPROM pointers */ +#define NGBE_CALSUM_COMMAND 0xE9 +#define NGBE_CALSUM_CAP_STATUS 0x10224 +#define NGBE_EEPROM_VERSION_STORE_REG 0x1022C +#define NGBE_SAN_MAC_ADDR_PTR 0x18 +#define NGBE_DEVICE_CAPS 0x1C +#define NGBE_EEPROM_VERSION_L 0x1D +#define NGBE_EEPROM_VERSION_H 0x1E + +/* Media-dependent registers. */ +#define NGBE_MDIO_CLAUSE_SELECT 0x11220 + +/* GPIO Registers */ +#define NGBE_GPIO_DR 0x14800 +#define NGBE_GPIO_DDR 0x14804 +/*GPIO bit */ +#define NGBE_GPIO_DR_0 BIT(0) /* SDP0 Data Value */ +#define NGBE_GPIO_DR_1 BIT(1) /* SDP1 Data Value */ +#define NGBE_GPIO_DDR_0 BIT(0) /* SDP0 IO direction */ +#define NGBE_GPIO_DDR_1 BIT(1) /* SDP1 IO direction */ + +/* Wake up registers */ +#define NGBE_PSR_WKUP_CTL 0x15B80 +/* Wake Up Filter Control Bit */ +#define NGBE_PSR_WKUP_CTL_LNKC BIT(0) /* Link Status Change Wakeup Enable*/ +#define NGBE_PSR_WKUP_CTL_MAG BIT(1) /* Magic Packet Wakeup Enable */ +#define NGBE_PSR_WKUP_CTL_EX BIT(2) /* Directed Exact Wakeup Enable */ +#define NGBE_PSR_WKUP_CTL_MC BIT(3) /* Directed Multicast Wakeup Enable*/ +#define NGBE_PSR_WKUP_CTL_BC BIT(4) /* Broadcast Wakeup Enable */ +#define NGBE_PSR_WKUP_CTL_ARP BIT(5) /* ARP Request Packet Wakeup Enable*/ +#define NGBE_PSR_WKUP_CTL_IPV4 BIT(6) /* Directed IPv4 Pkt Wakeup Enable */ +#define NGBE_PSR_WKUP_CTL_IPV6 BIT(7) /* Directed IPv6 Pkt Wakeup Enable */ + +#define NGBE_FW_EEPROM_CHECKSUM_CMD 0xE9 +#define NGBE_FW_NVM_DATA_OFFSET 3 +#define NGBE_FW_CMD_DEFAULT_CHECKSUM 0xFF /* checksum always 0xFF */ +#define NGBE_FW_CMD_ST_PASS 0x80658383 +#define NGBE_FW_CMD_ST_FAIL 0x70657376 + +enum ngbe_phy_type { + ngbe_phy_unknown = 0, + ngbe_phy_none, + ngbe_phy_internal, + ngbe_phy_m88e1512, + ngbe_phy_m88e1512_sfi, + ngbe_phy_m88e1512_unknown, + ngbe_phy_yt8521s, + ngbe_phy_yt8521s_sfi, + ngbe_phy_internal_yt8521s_sfi, + ngbe_phy_generic +}; + +enum ngbe_media_type { + ngbe_media_type_unknown = 0, + ngbe_media_type_fiber, + ngbe_media_type_copper, + ngbe_media_type_backplane, +}; + +enum ngbe_mac_type { + ngbe_mac_type_unknown = 0, + ngbe_mac_type_mdi, + ngbe_mac_type_rgmii +}; + +struct ngbe_phy_info { + enum ngbe_phy_type type; + enum ngbe_media_type media_type; + + u32 addr; + u32 id; + + bool reset_if_overtemp; + +}; + +struct ngbe_hw { + struct wx_hw wxhw; + struct ngbe_phy_info phy; + enum ngbe_mac_type mac_type; + + bool wol_enabled; + bool ncsi_enabled; + bool gpio_ctrl; +}; #endif /* _NGBE_TYPE_H_ */ diff --git a/drivers/net/ethernet/wangxun/txgbe/Makefile b/drivers/net/ethernet/wangxun/txgbe/Makefile index 431303ca75b4..78484c58b78b 100644 --- a/drivers/net/ethernet/wangxun/txgbe/Makefile +++ b/drivers/net/ethernet/wangxun/txgbe/Makefile @@ -6,4 +6,5 @@ obj-$(CONFIG_TXGBE) += txgbe.o -txgbe-objs := txgbe_main.o +txgbe-objs := txgbe_main.o \ + txgbe_hw.o diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe.h b/drivers/net/ethernet/wangxun/txgbe/txgbe.h index 38ddbde0ed0f..19e61377bd00 100644 --- a/drivers/net/ethernet/wangxun/txgbe/txgbe.h +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe.h @@ -4,19 +4,38 @@ #ifndef _TXGBE_H_ #define _TXGBE_H_ -#include "txgbe_type.h" - #define TXGBE_MAX_FDIR_INDICES 63 #define TXGBE_MAX_RX_QUEUES (TXGBE_MAX_FDIR_INDICES + 1) #define TXGBE_MAX_TX_QUEUES (TXGBE_MAX_FDIR_INDICES + 1) +#define TXGBE_SP_MAX_TX_QUEUES 128 +#define TXGBE_SP_MAX_RX_QUEUES 128 +#define TXGBE_SP_RAR_ENTRIES 128 +#define TXGBE_SP_MC_TBL_SIZE 128 + +struct txgbe_mac_addr { + u8 addr[ETH_ALEN]; + u16 state; /* bitmask */ + u64 pools; +}; + +#define TXGBE_MAC_STATE_DEFAULT 0x1 +#define TXGBE_MAC_STATE_MODIFIED 0x2 +#define TXGBE_MAC_STATE_IN_USE 0x4 + /* board specific private data structure */ struct txgbe_adapter { u8 __iomem *io_addr; /* Mainly for iounmap use */ /* OS defined structs */ struct net_device *netdev; struct pci_dev *pdev; + + /* structs defined in txgbe_type.h */ + struct txgbe_hw hw; + u16 msg_enable; + struct txgbe_mac_addr *mac_table; + char eeprom_id[32]; }; extern char txgbe_driver_name[]; diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c new file mode 100644 index 000000000000..167f7ff73192 --- /dev/null +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c @@ -0,0 +1,312 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2015 - 2022 Beijing WangXun Technology Co., Ltd. */ + +#include <linux/etherdevice.h> +#include <linux/if_ether.h> +#include <linux/string.h> +#include <linux/iopoll.h> +#include <linux/types.h> +#include <linux/pci.h> + +#include "../libwx/wx_type.h" +#include "../libwx/wx_hw.h" +#include "txgbe_type.h" +#include "txgbe_hw.h" +#include "txgbe.h" + +/** + * txgbe_init_thermal_sensor_thresh - Inits thermal sensor thresholds + * @hw: pointer to hardware structure + * + * Inits the thermal sensor thresholds according to the NVM map + * and save off the threshold and location values into mac.thermal_sensor_data + **/ +static void txgbe_init_thermal_sensor_thresh(struct txgbe_hw *hw) +{ + struct wx_hw *wxhw = &hw->wxhw; + struct wx_thermal_sensor_data *data = &wxhw->mac.sensor; + + memset(data, 0, sizeof(struct wx_thermal_sensor_data)); + + /* Only support thermal sensors attached to SP physical port 0 */ + if (wxhw->bus.func) + return; + + wr32(wxhw, TXGBE_TS_CTL, TXGBE_TS_CTL_EVAL_MD); + + wr32(wxhw, WX_TS_INT_EN, + WX_TS_INT_EN_ALARM_INT_EN | WX_TS_INT_EN_DALARM_INT_EN); + wr32(wxhw, WX_TS_EN, WX_TS_EN_ENA); + + data->alarm_thresh = 100; + wr32(wxhw, WX_TS_ALARM_THRE, 677); + data->dalarm_thresh = 90; + wr32(wxhw, WX_TS_DALARM_THRE, 614); +} + +/** + * txgbe_read_pba_string - Reads part number string from EEPROM + * @hw: pointer to hardware structure + * @pba_num: stores the part number string from the EEPROM + * @pba_num_size: part number string buffer length + * + * Reads the part number string from the EEPROM. + **/ +int txgbe_read_pba_string(struct txgbe_hw *hw, u8 *pba_num, u32 pba_num_size) +{ + u16 pba_ptr, offset, length, data; + struct wx_hw *wxhw = &hw->wxhw; + int ret_val; + + if (!pba_num) { + wx_err(wxhw, "PBA string buffer was null\n"); + return -EINVAL; + } + + ret_val = wx_read_ee_hostif(wxhw, + wxhw->eeprom.sw_region_offset + TXGBE_PBANUM0_PTR, + &data); + if (ret_val != 0) { + wx_err(wxhw, "NVM Read Error\n"); + return ret_val; + } + + ret_val = wx_read_ee_hostif(wxhw, + wxhw->eeprom.sw_region_offset + TXGBE_PBANUM1_PTR, + &pba_ptr); + if (ret_val != 0) { + wx_err(wxhw, "NVM Read Error\n"); + return ret_val; + } + + /* if data is not ptr guard the PBA must be in legacy format which + * means pba_ptr is actually our second data word for the PBA number + * and we can decode it into an ascii string + */ + if (data != TXGBE_PBANUM_PTR_GUARD) { + wx_err(wxhw, "NVM PBA number is not stored as string\n"); + + /* we will need 11 characters to store the PBA */ + if (pba_num_size < 11) { + wx_err(wxhw, "PBA string buffer too small\n"); + return -ENOMEM; + } + + /* extract hex string from data and pba_ptr */ + pba_num[0] = (data >> 12) & 0xF; + pba_num[1] = (data >> 8) & 0xF; + pba_num[2] = (data >> 4) & 0xF; + pba_num[3] = data & 0xF; + pba_num[4] = (pba_ptr >> 12) & 0xF; + pba_num[5] = (pba_ptr >> 8) & 0xF; + pba_num[6] = '-'; + pba_num[7] = 0; + pba_num[8] = (pba_ptr >> 4) & 0xF; + pba_num[9] = pba_ptr & 0xF; + + /* put a null character on the end of our string */ + pba_num[10] = '\0'; + + /* switch all the data but the '-' to hex char */ + for (offset = 0; offset < 10; offset++) { + if (pba_num[offset] < 0xA) + pba_num[offset] += '0'; + else if (pba_num[offset] < 0x10) + pba_num[offset] += 'A' - 0xA; + } + + return 0; + } + + ret_val = wx_read_ee_hostif(wxhw, pba_ptr, &length); + if (ret_val != 0) { + wx_err(wxhw, "NVM Read Error\n"); + return ret_val; + } + + if (length == 0xFFFF || length == 0) { + wx_err(wxhw, "NVM PBA number section invalid length\n"); + return -EINVAL; + } + + /* check if pba_num buffer is big enough */ + if (pba_num_size < (((u32)length * 2) - 1)) { + wx_err(wxhw, "PBA string buffer too small\n"); + return -ENOMEM; + } + + /* trim pba length from start of string */ + pba_ptr++; + length--; + + for (offset = 0; offset < length; offset++) { + ret_val = wx_read_ee_hostif(wxhw, pba_ptr + offset, &data); + if (ret_val != 0) { + wx_err(wxhw, "NVM Read Error\n"); + return ret_val; + } + pba_num[offset * 2] = (u8)(data >> 8); + pba_num[(offset * 2) + 1] = (u8)(data & 0xFF); + } + pba_num[offset * 2] = '\0'; + + return 0; +} + +/** + * txgbe_calc_eeprom_checksum - Calculates and returns the checksum + * @hw: pointer to hardware structure + * @checksum: pointer to cheksum + * + * Returns a negative error code on error + **/ +static int txgbe_calc_eeprom_checksum(struct txgbe_hw *hw, u16 *checksum) +{ + struct wx_hw *wxhw = &hw->wxhw; + u16 *eeprom_ptrs = NULL; + u32 buffer_size = 0; + u16 *buffer = NULL; + u16 *local_buffer; + int status; + u16 i; + + wx_init_eeprom_params(wxhw); + + if (!buffer) { + eeprom_ptrs = kvmalloc_array(TXGBE_EEPROM_LAST_WORD, sizeof(u16), + GFP_KERNEL); + if (!eeprom_ptrs) + return -ENOMEM; + /* Read pointer area */ + status = wx_read_ee_hostif_buffer(wxhw, 0, + TXGBE_EEPROM_LAST_WORD, + eeprom_ptrs); + if (status != 0) { + wx_err(wxhw, "Failed to read EEPROM image\n"); + kvfree(eeprom_ptrs); + return status; + } + local_buffer = eeprom_ptrs; + } else { + if (buffer_size < TXGBE_EEPROM_LAST_WORD) + return -EFAULT; + local_buffer = buffer; + } + + for (i = 0; i < TXGBE_EEPROM_LAST_WORD; i++) + if (i != wxhw->eeprom.sw_region_offset + TXGBE_EEPROM_CHECKSUM) + *checksum += local_buffer[i]; + + if (eeprom_ptrs) + kvfree(eeprom_ptrs); + + if (*checksum > TXGBE_EEPROM_SUM) + return -EINVAL; + + *checksum = TXGBE_EEPROM_SUM - *checksum; + + return 0; +} + +/** + * txgbe_validate_eeprom_checksum - Validate EEPROM checksum + * @hw: pointer to hardware structure + * @checksum_val: calculated checksum + * + * Performs checksum calculation and validates the EEPROM checksum. If the + * caller does not need checksum_val, the value can be NULL. + **/ +int txgbe_validate_eeprom_checksum(struct txgbe_hw *hw, u16 *checksum_val) +{ + struct wx_hw *wxhw = &hw->wxhw; + u16 read_checksum = 0; + u16 checksum; + int status; + + /* Read the first word from the EEPROM. If this times out or fails, do + * not continue or we could be in for a very long wait while every + * EEPROM read fails + */ + status = wx_read_ee_hostif(wxhw, 0, &checksum); + if (status) { + wx_err(wxhw, "EEPROM read failed\n"); + return status; + } + + checksum = 0; + status = txgbe_calc_eeprom_checksum(hw, &checksum); + if (status != 0) + return status; + + status = wx_read_ee_hostif(wxhw, wxhw->eeprom.sw_region_offset + + TXGBE_EEPROM_CHECKSUM, &read_checksum); + if (status != 0) + return status; + + /* Verify read checksum from EEPROM is the same as + * calculated checksum + */ + if (read_checksum != checksum) { + status = -EIO; + wx_err(wxhw, "Invalid EEPROM checksum\n"); + } + + /* If the user cares, return the calculated checksum */ + if (checksum_val) + *checksum_val = checksum; + + return status; +} + +static void txgbe_reset_misc(struct txgbe_hw *hw) +{ + struct wx_hw *wxhw = &hw->wxhw; + + wx_reset_misc(wxhw); + txgbe_init_thermal_sensor_thresh(hw); +} + +/** + * txgbe_reset_hw - Perform hardware reset + * @hw: pointer to hardware structure + * + * Resets the hardware by resetting the transmit and receive units, masks + * and clears all interrupts, perform a PHY reset, and perform a link (MAC) + * reset. + **/ +int txgbe_reset_hw(struct txgbe_hw *hw) +{ + struct wx_hw *wxhw = &hw->wxhw; + int status; + + /* Call adapter stop to disable tx/rx and clear interrupts */ + status = wx_stop_adapter(wxhw); + if (status != 0) + return status; + + if (!(((wxhw->subsystem_device_id & WX_NCSI_MASK) == WX_NCSI_SUP) || + ((wxhw->subsystem_device_id & WX_WOL_MASK) == WX_WOL_SUP))) + wx_reset_hostif(wxhw); + + usleep_range(10, 100); + + status = wx_check_flash_load(wxhw, TXGBE_SPI_ILDR_STATUS_LAN_SW_RST(wxhw->bus.func)); + if (status != 0) + return status; + + txgbe_reset_misc(hw); + + /* Store the permanent mac address */ + wx_get_mac_addr(wxhw, wxhw->mac.perm_addr); + + /* Store MAC address from RAR0, clear receive address registers, and + * clear the multicast table. Also reset num_rar_entries to 128, + * since we modify this value when programming the SAN MAC address. + */ + wxhw->mac.num_rar_entries = TXGBE_SP_RAR_ENTRIES; + wx_init_rx_addrs(wxhw); + + pci_set_master(wxhw->pdev); + + return 0; +} diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h new file mode 100644 index 000000000000..6a751a69177b --- /dev/null +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2015 - 2022 Beijing WangXun Technology Co., Ltd. */ + +#ifndef _TXGBE_HW_H_ +#define _TXGBE_HW_H_ + +int txgbe_read_pba_string(struct txgbe_hw *hw, u8 *pba_num, u32 pba_num_size); +int txgbe_validate_eeprom_checksum(struct txgbe_hw *hw, u16 *checksum_val); +int txgbe_reset_hw(struct txgbe_hw *hw); + +#endif /* _TXGBE_HW_H_ */ diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c index d3b9f73ecba4..36780e7f05b7 100644 --- a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c @@ -8,7 +8,12 @@ #include <linux/string.h> #include <linux/aer.h> #include <linux/etherdevice.h> +#include <net/ip.h> +#include "../libwx/wx_type.h" +#include "../libwx/wx_hw.h" +#include "txgbe_type.h" +#include "txgbe_hw.h" #include "txgbe.h" char txgbe_driver_name[] = "txgbe"; @@ -30,13 +35,305 @@ static const struct pci_device_id txgbe_pci_tbl[] = { #define DEFAULT_DEBUG_LEVEL_SHIFT 3 +static void txgbe_check_minimum_link(struct txgbe_adapter *adapter) +{ + struct pci_dev *pdev; + + pdev = adapter->pdev; + pcie_print_link_status(pdev); +} + +/** + * txgbe_enumerate_functions - Get the number of ports this device has + * @adapter: adapter structure + * + * This function enumerates the phsyical functions co-located on a single slot, + * in order to determine how many ports a device has. This is most useful in + * determining the required GT/s of PCIe bandwidth necessary for optimal + * performance. + **/ +static int txgbe_enumerate_functions(struct txgbe_adapter *adapter) +{ + struct pci_dev *entry, *pdev = adapter->pdev; + int physfns = 0; + + list_for_each_entry(entry, &pdev->bus->devices, bus_list) { + /* When the devices on the bus don't all match our device ID, + * we can't reliably determine the correct number of + * functions. This can occur if a function has been direct + * attached to a virtual machine using VT-d. + */ + if (entry->vendor != pdev->vendor || + entry->device != pdev->device) + return -EINVAL; + + physfns++; + } + + return physfns; +} + +static void txgbe_sync_mac_table(struct txgbe_adapter *adapter) +{ + struct txgbe_hw *hw = &adapter->hw; + struct wx_hw *wxhw = &hw->wxhw; + int i; + + for (i = 0; i < wxhw->mac.num_rar_entries; i++) { + if (adapter->mac_table[i].state & TXGBE_MAC_STATE_MODIFIED) { + if (adapter->mac_table[i].state & TXGBE_MAC_STATE_IN_USE) { + wx_set_rar(wxhw, i, + adapter->mac_table[i].addr, + adapter->mac_table[i].pools, + WX_PSR_MAC_SWC_AD_H_AV); + } else { + wx_clear_rar(wxhw, i); + } + adapter->mac_table[i].state &= ~(TXGBE_MAC_STATE_MODIFIED); + } + } +} + +/* this function destroys the first RAR entry */ +static void txgbe_mac_set_default_filter(struct txgbe_adapter *adapter, + u8 *addr) +{ + struct wx_hw *wxhw = &adapter->hw.wxhw; + + memcpy(&adapter->mac_table[0].addr, addr, ETH_ALEN); + adapter->mac_table[0].pools = 1ULL; + adapter->mac_table[0].state = (TXGBE_MAC_STATE_DEFAULT | + TXGBE_MAC_STATE_IN_USE); + wx_set_rar(wxhw, 0, adapter->mac_table[0].addr, + adapter->mac_table[0].pools, + WX_PSR_MAC_SWC_AD_H_AV); +} + +static void txgbe_flush_sw_mac_table(struct txgbe_adapter *adapter) +{ + struct wx_hw *wxhw = &adapter->hw.wxhw; + u32 i; + + for (i = 0; i < wxhw->mac.num_rar_entries; i++) { + adapter->mac_table[i].state |= TXGBE_MAC_STATE_MODIFIED; + adapter->mac_table[i].state &= ~TXGBE_MAC_STATE_IN_USE; + memset(adapter->mac_table[i].addr, 0, ETH_ALEN); + adapter->mac_table[i].pools = 0; + } + txgbe_sync_mac_table(adapter); +} + +static int txgbe_del_mac_filter(struct txgbe_adapter *adapter, u8 *addr, u16 pool) +{ + struct wx_hw *wxhw = &adapter->hw.wxhw; + u32 i; + + if (is_zero_ether_addr(addr)) + return -EINVAL; + + /* search table for addr, if found, set to 0 and sync */ + for (i = 0; i < wxhw->mac.num_rar_entries; i++) { + if (ether_addr_equal(addr, adapter->mac_table[i].addr)) { + if (adapter->mac_table[i].pools & (1ULL << pool)) { + adapter->mac_table[i].state |= TXGBE_MAC_STATE_MODIFIED; + adapter->mac_table[i].state &= ~TXGBE_MAC_STATE_IN_USE; + adapter->mac_table[i].pools &= ~(1ULL << pool); + txgbe_sync_mac_table(adapter); + } + return 0; + } + + if (adapter->mac_table[i].pools != (1 << pool)) + continue; + if (!ether_addr_equal(addr, adapter->mac_table[i].addr)) + continue; + + adapter->mac_table[i].state |= TXGBE_MAC_STATE_MODIFIED; + adapter->mac_table[i].state &= ~TXGBE_MAC_STATE_IN_USE; + memset(adapter->mac_table[i].addr, 0, ETH_ALEN); + adapter->mac_table[i].pools = 0; + txgbe_sync_mac_table(adapter); + return 0; + } + return -ENOMEM; +} + +static void txgbe_up_complete(struct txgbe_adapter *adapter) +{ + struct txgbe_hw *hw = &adapter->hw; + struct wx_hw *wxhw = &hw->wxhw; + + wx_control_hw(wxhw, true); +} + +static void txgbe_reset(struct txgbe_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct txgbe_hw *hw = &adapter->hw; + u8 old_addr[ETH_ALEN]; + int err; + + err = txgbe_reset_hw(hw); + if (err != 0) + dev_err(&adapter->pdev->dev, "Hardware Error: %d\n", err); + + /* do not flush user set addresses */ + memcpy(old_addr, &adapter->mac_table[0].addr, netdev->addr_len); + txgbe_flush_sw_mac_table(adapter); + txgbe_mac_set_default_filter(adapter, old_addr); +} + +static void txgbe_disable_device(struct txgbe_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct wx_hw *wxhw = &adapter->hw.wxhw; + + wx_disable_pcie_master(wxhw); + /* disable receives */ + wx_disable_rx(wxhw); + + netif_carrier_off(netdev); + netif_tx_disable(netdev); + + if (wxhw->bus.func < 2) + wr32m(wxhw, TXGBE_MIS_PRB_CTL, TXGBE_MIS_PRB_CTL_LAN_UP(wxhw->bus.func), 0); + else + dev_err(&adapter->pdev->dev, + "%s: invalid bus lan id %d\n", + __func__, wxhw->bus.func); + + if (!(((wxhw->subsystem_device_id & WX_NCSI_MASK) == WX_NCSI_SUP) || + ((wxhw->subsystem_device_id & WX_WOL_MASK) == WX_WOL_SUP))) { + /* disable mac transmiter */ + wr32m(wxhw, WX_MAC_TX_CFG, WX_MAC_TX_CFG_TE, 0); + } + + /* Disable the Tx DMA engine */ + wr32m(wxhw, WX_TDM_CTL, WX_TDM_CTL_TE, 0); +} + +static void txgbe_down(struct txgbe_adapter *adapter) +{ + txgbe_disable_device(adapter); + txgbe_reset(adapter); +} + +/** + * txgbe_sw_init - Initialize general software structures (struct txgbe_adapter) + * @adapter: board private structure to initialize + **/ +static int txgbe_sw_init(struct txgbe_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + struct txgbe_hw *hw = &adapter->hw; + struct wx_hw *wxhw = &hw->wxhw; + int err; + + wxhw->hw_addr = adapter->io_addr; + wxhw->pdev = pdev; + + /* PCI config space info */ + err = wx_sw_init(wxhw); + if (err < 0) { + netif_err(adapter, probe, adapter->netdev, + "read of internal subsystem device id failed\n"); + return err; + } + + switch (wxhw->device_id) { + case TXGBE_DEV_ID_SP1000: + case TXGBE_DEV_ID_WX1820: + wxhw->mac.type = wx_mac_sp; + break; + default: + wxhw->mac.type = wx_mac_unknown; + break; + } + + wxhw->mac.num_rar_entries = TXGBE_SP_RAR_ENTRIES; + wxhw->mac.max_tx_queues = TXGBE_SP_MAX_TX_QUEUES; + wxhw->mac.max_rx_queues = TXGBE_SP_MAX_RX_QUEUES; + wxhw->mac.mcft_size = TXGBE_SP_MC_TBL_SIZE; + + adapter->mac_table = kcalloc(wxhw->mac.num_rar_entries, + sizeof(struct txgbe_mac_addr), + GFP_KERNEL); + if (!adapter->mac_table) { + netif_err(adapter, probe, adapter->netdev, + "mac_table allocation failed\n"); + return -ENOMEM; + } + + return 0; +} + +/** + * txgbe_open - Called when a network interface is made active + * @netdev: network interface device structure + * + * Returns 0 on success, negative value on failure + * + * The open entry point is called when a network interface is made + * active by the system (IFF_UP). + **/ +static int txgbe_open(struct net_device *netdev) +{ + struct txgbe_adapter *adapter = netdev_priv(netdev); + + txgbe_up_complete(adapter); + + return 0; +} + +/** + * txgbe_close_suspend - actions necessary to both suspend and close flows + * @adapter: the private adapter struct + * + * This function should contain the necessary work common to both suspending + * and closing of the device. + */ +static void txgbe_close_suspend(struct txgbe_adapter *adapter) +{ + txgbe_disable_device(adapter); +} + +/** + * txgbe_close - Disables a network interface + * @netdev: network interface device structure + * + * Returns 0, this is not allowed to fail + * + * The close entry point is called when an interface is de-activated + * by the OS. The hardware is still under the drivers control, but + * needs to be disabled. A global MAC reset is issued to stop the + * hardware, and all transmit and receive resources are freed. + **/ +static int txgbe_close(struct net_device *netdev) +{ + struct txgbe_adapter *adapter = netdev_priv(netdev); + + txgbe_down(adapter); + wx_control_hw(&adapter->hw.wxhw, false); + + return 0; +} + static void txgbe_dev_shutdown(struct pci_dev *pdev, bool *enable_wake) { struct txgbe_adapter *adapter = pci_get_drvdata(pdev); struct net_device *netdev = adapter->netdev; + struct txgbe_hw *hw = &adapter->hw; + struct wx_hw *wxhw = &hw->wxhw; netif_device_detach(netdev); + rtnl_lock(); + if (netif_running(netdev)) + txgbe_close_suspend(adapter); + rtnl_unlock(); + + wx_control_hw(wxhw, false); + pci_disable_device(pdev); } @@ -52,6 +349,47 @@ static void txgbe_shutdown(struct pci_dev *pdev) } } +static netdev_tx_t txgbe_xmit_frame(struct sk_buff *skb, + struct net_device *netdev) +{ + return NETDEV_TX_OK; +} + +/** + * txgbe_set_mac - Change the Ethernet Address of the NIC + * @netdev: network interface device structure + * @p: pointer to an address structure + * + * Returns 0 on success, negative on failure + **/ +static int txgbe_set_mac(struct net_device *netdev, void *p) +{ + struct txgbe_adapter *adapter = netdev_priv(netdev); + struct wx_hw *wxhw = &adapter->hw.wxhw; + struct sockaddr *addr = p; + int retval; + + retval = eth_prepare_mac_addr_change(netdev, addr); + if (retval) + return retval; + + txgbe_del_mac_filter(adapter, wxhw->mac.addr, 0); + eth_hw_addr_set(netdev, addr->sa_data); + memcpy(wxhw->mac.addr, addr->sa_data, netdev->addr_len); + + txgbe_mac_set_default_filter(adapter, wxhw->mac.addr); + + return 0; +} + +static const struct net_device_ops txgbe_netdev_ops = { + .ndo_open = txgbe_open, + .ndo_stop = txgbe_close, + .ndo_start_xmit = txgbe_xmit_frame, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = txgbe_set_mac, +}; + /** * txgbe_probe - Device Initialization Routine * @pdev: PCI device information struct @@ -67,8 +405,16 @@ static int txgbe_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent) { struct txgbe_adapter *adapter = NULL; + struct txgbe_hw *hw = NULL; + struct wx_hw *wxhw = NULL; struct net_device *netdev; - int err; + int err, expected_gts; + + u16 eeprom_verh = 0, eeprom_verl = 0, offset = 0; + u16 eeprom_cfg_blkh = 0, eeprom_cfg_blkl = 0; + u16 build = 0, major = 0, patch = 0; + u8 part_str[TXGBE_PBANUM_LENGTH]; + u32 etrack_id = 0; err = pci_enable_device_mem(pdev); if (err) @@ -107,6 +453,9 @@ static int txgbe_probe(struct pci_dev *pdev, adapter = netdev_priv(netdev); adapter->netdev = netdev; adapter->pdev = pdev; + hw = &adapter->hw; + wxhw = &hw->wxhw; + adapter->msg_enable = (1 << DEFAULT_DEBUG_LEVEL_SHIFT) - 1; adapter->io_addr = devm_ioremap(&pdev->dev, pci_resource_start(pdev, 0), @@ -116,12 +465,118 @@ static int txgbe_probe(struct pci_dev *pdev, goto err_pci_release_regions; } + netdev->netdev_ops = &txgbe_netdev_ops; + + /* setup the private structure */ + err = txgbe_sw_init(adapter); + if (err) + goto err_free_mac_table; + + /* check if flash load is done after hw power up */ + err = wx_check_flash_load(wxhw, TXGBE_SPI_ILDR_STATUS_PERST); + if (err) + goto err_free_mac_table; + err = wx_check_flash_load(wxhw, TXGBE_SPI_ILDR_STATUS_PWRRST); + if (err) + goto err_free_mac_table; + + err = wx_mng_present(wxhw); + if (err) { + dev_err(&pdev->dev, "Management capability is not present\n"); + goto err_free_mac_table; + } + + err = txgbe_reset_hw(hw); + if (err) { + dev_err(&pdev->dev, "HW Init failed: %d\n", err); + goto err_free_mac_table; + } + netdev->features |= NETIF_F_HIGHDMA; + /* make sure the EEPROM is good */ + err = txgbe_validate_eeprom_checksum(hw, NULL); + if (err != 0) { + dev_err(&pdev->dev, "The EEPROM Checksum Is Not Valid\n"); + wr32(wxhw, WX_MIS_RST, WX_MIS_RST_SW_RST); + err = -EIO; + goto err_free_mac_table; + } + + eth_hw_addr_set(netdev, wxhw->mac.perm_addr); + txgbe_mac_set_default_filter(adapter, wxhw->mac.perm_addr); + + /* Save off EEPROM version number and Option Rom version which + * together make a unique identify for the eeprom + */ + wx_read_ee_hostif(wxhw, + wxhw->eeprom.sw_region_offset + TXGBE_EEPROM_VERSION_H, + &eeprom_verh); + wx_read_ee_hostif(wxhw, + wxhw->eeprom.sw_region_offset + TXGBE_EEPROM_VERSION_L, + &eeprom_verl); + etrack_id = (eeprom_verh << 16) | eeprom_verl; + + wx_read_ee_hostif(wxhw, + wxhw->eeprom.sw_region_offset + TXGBE_ISCSI_BOOT_CONFIG, + &offset); + + /* Make sure offset to SCSI block is valid */ + if (!(offset == 0x0) && !(offset == 0xffff)) { + wx_read_ee_hostif(wxhw, offset + 0x84, &eeprom_cfg_blkh); + wx_read_ee_hostif(wxhw, offset + 0x83, &eeprom_cfg_blkl); + + /* Only display Option Rom if exist */ + if (eeprom_cfg_blkl && eeprom_cfg_blkh) { + major = eeprom_cfg_blkl >> 8; + build = (eeprom_cfg_blkl << 8) | (eeprom_cfg_blkh >> 8); + patch = eeprom_cfg_blkh & 0x00ff; + + snprintf(adapter->eeprom_id, sizeof(adapter->eeprom_id), + "0x%08x, %d.%d.%d", etrack_id, major, build, + patch); + } else { + snprintf(adapter->eeprom_id, sizeof(adapter->eeprom_id), + "0x%08x", etrack_id); + } + } else { + snprintf(adapter->eeprom_id, sizeof(adapter->eeprom_id), + "0x%08x", etrack_id); + } + + err = register_netdev(netdev); + if (err) + goto err_release_hw; + pci_set_drvdata(pdev, adapter); + /* calculate the expected PCIe bandwidth required for optimal + * performance. Note that some older parts will never have enough + * bandwidth due to being older generation PCIe parts. We clamp these + * parts to ensure that no warning is displayed, as this could confuse + * users otherwise. + */ + expected_gts = txgbe_enumerate_functions(adapter) * 10; + + /* don't check link if we failed to enumerate functions */ + if (expected_gts > 0) + txgbe_check_minimum_link(adapter); + else + dev_warn(&pdev->dev, "Failed to enumerate PF devices.\n"); + + /* First try to read PBA as a string */ + err = txgbe_read_pba_string(hw, part_str, TXGBE_PBANUM_LENGTH); + if (err) + strncpy(part_str, "Unknown", TXGBE_PBANUM_LENGTH); + + netif_info(adapter, probe, netdev, "%pM\n", netdev->dev_addr); + return 0; +err_release_hw: + wx_control_hw(wxhw, false); +err_free_mac_table: + kfree(adapter->mac_table); err_pci_release_regions: pci_disable_pcie_error_reporting(pdev); pci_release_selected_regions(pdev, @@ -142,9 +597,17 @@ err_pci_disable_dev: **/ static void txgbe_remove(struct pci_dev *pdev) { + struct txgbe_adapter *adapter = pci_get_drvdata(pdev); + struct net_device *netdev; + + netdev = adapter->netdev; + unregister_netdev(netdev); + pci_release_selected_regions(pdev, pci_select_bars(pdev, IORESOURCE_MEM)); + kfree(adapter->mac_table); + pci_disable_pcie_error_reporting(pdev); pci_disable_device(pdev); diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h b/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h index b2e329f50bae..740a1c447e20 100644 --- a/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h @@ -4,15 +4,6 @@ #ifndef _TXGBE_TYPE_H_ #define _TXGBE_TYPE_H_ -#include <linux/types.h> -#include <linux/netdevice.h> - -/************ txgbe_register.h ************/ -/* Vendor ID */ -#ifndef PCI_VENDOR_ID_WANGXUN -#define PCI_VENDOR_ID_WANGXUN 0x8088 -#endif - /* Device IDs */ #define TXGBE_DEV_ID_SP1000 0x1001 #define TXGBE_DEV_ID_WX1820 0x2001 @@ -42,16 +33,42 @@ #define TXGBE_ID_WX1820_MAC_SGMII 0x2060 #define TXGBE_ID_MAC_SGMII 0x60 -#define TXGBE_NCSI_SUP 0x8000 -#define TXGBE_NCSI_MASK 0x8000 -#define TXGBE_WOL_SUP 0x4000 -#define TXGBE_WOL_MASK 0x4000 -#define TXGBE_DEV_MASK 0xf0 - /* Combined interface*/ #define TXGBE_ID_SFI_XAUI 0x50 /* Revision ID */ #define TXGBE_SP_MPW 1 +/**************** SP Registers ****************************/ +/* chip control Registers */ +#define TXGBE_MIS_PRB_CTL 0x10010 +#define TXGBE_MIS_PRB_CTL_LAN_UP(_i) BIT(1 - (_i)) +/* FMGR Registers */ +#define TXGBE_SPI_ILDR_STATUS 0x10120 +#define TXGBE_SPI_ILDR_STATUS_PERST BIT(0) /* PCIE_PERST is done */ +#define TXGBE_SPI_ILDR_STATUS_PWRRST BIT(1) /* Power on reset is done */ +#define TXGBE_SPI_ILDR_STATUS_LAN_SW_RST(_i) BIT((_i) + 9) /* lan soft reset done */ + +/* Sensors for PVT(Process Voltage Temperature) */ +#define TXGBE_TS_CTL 0x10300 +#define TXGBE_TS_CTL_EVAL_MD BIT(31) + +/* Part Number String Length */ +#define TXGBE_PBANUM_LENGTH 32 + +/* Checksum and EEPROM pointers */ +#define TXGBE_EEPROM_LAST_WORD 0x800 +#define TXGBE_EEPROM_CHECKSUM 0x2F +#define TXGBE_EEPROM_SUM 0xBABA +#define TXGBE_EEPROM_VERSION_L 0x1D +#define TXGBE_EEPROM_VERSION_H 0x1E +#define TXGBE_ISCSI_BOOT_CONFIG 0x07 +#define TXGBE_PBANUM0_PTR 0x05 +#define TXGBE_PBANUM1_PTR 0x06 +#define TXGBE_PBANUM_PTR_GUARD 0xFAFA + +struct txgbe_hw { + struct wx_hw wxhw; +}; + #endif /* _TXGBE_TYPE_H_ */ |