diff options
Diffstat (limited to 'drivers/net/ethernet/smsc/smc91x.c')
| -rw-r--r-- | drivers/net/ethernet/smsc/smc91x.c | 2431 |
1 files changed, 2431 insertions, 0 deletions
diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c new file mode 100644 index 000000000000..f47f81e25322 --- /dev/null +++ b/drivers/net/ethernet/smsc/smc91x.c @@ -0,0 +1,2431 @@ +/* + * smc91x.c + * This is a driver for SMSC's 91C9x/91C1xx single-chip Ethernet devices. + * + * Copyright (C) 1996 by Erik Stahlman + * Copyright (C) 2001 Standard Microsystems Corporation + * Developed by Simple Network Magic Corporation + * Copyright (C) 2003 Monta Vista Software, Inc. + * Unified SMC91x driver by Nicolas Pitre + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Arguments: + * io = for the base address + * irq = for the IRQ + * nowait = 0 for normal wait states, 1 eliminates additional wait states + * + * original author: + * Erik Stahlman <erik@vt.edu> + * + * hardware multicast code: + * Peter Cammaert <pc@denkart.be> + * + * contributors: + * Daris A Nevil <dnevil@snmc.com> + * Nicolas Pitre <nico@fluxnic.net> + * Russell King <rmk@arm.linux.org.uk> + * + * History: + * 08/20/00 Arnaldo Melo fix kfree(skb) in smc_hardware_send_packet + * 12/15/00 Christian Jullien fix "Warning: kfree_skb on hard IRQ" + * 03/16/01 Daris A Nevil modified smc9194.c for use with LAN91C111 + * 08/22/01 Scott Anderson merge changes from smc9194 to smc91111 + * 08/21/01 Pramod B Bhardwaj added support for RevB of LAN91C111 + * 12/20/01 Jeff Sutherland initial port to Xscale PXA with DMA support + * 04/07/03 Nicolas Pitre unified SMC91x driver, killed irq races, + * more bus abstraction, big cleanup, etc. + * 29/09/03 Russell King - add driver model support + * - ethtool support + * - convert to use generic MII interface + * - add link up/down notification + * - don't try to handle full negotiation in + * smc_phy_configure + * - clean up (and fix stack overrun) in PHY + * MII read/write functions + * 22/09/04 Nicolas Pitre big update (see commit log for details) + */ +static const char version[] = + "smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@fluxnic.net>\n"; + +/* Debugging level */ +#ifndef SMC_DEBUG +#define SMC_DEBUG 0 +#endif + + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/crc32.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/ethtool.h> +#include <linux/mii.h> +#include <linux/workqueue.h> +#include <linux/of.h> + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> + +#include <asm/io.h> + +#include "smc91x.h" + +#ifndef SMC_NOWAIT +# define SMC_NOWAIT 0 +#endif +static int nowait = SMC_NOWAIT; +module_param(nowait, int, 0400); +MODULE_PARM_DESC(nowait, "set to 1 for no wait state"); + +/* + * Transmit timeout, default 5 seconds. + */ +static int watchdog = 1000; +module_param(watchdog, int, 0400); +MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds"); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:smc91x"); + +/* + * The internal workings of the driver. If you are changing anything + * here with the SMC stuff, you should have the datasheet and know + * what you are doing. + */ +#define CARDNAME "smc91x" + +/* + * Use power-down feature of the chip + */ +#define POWER_DOWN 1 + +/* + * Wait time for memory to be free. This probably shouldn't be + * tuned that much, as waiting for this means nothing else happens + * in the system + */ +#define MEMORY_WAIT_TIME 16 + +/* + * The maximum number of processing loops allowed for each call to the + * IRQ handler. + */ +#define MAX_IRQ_LOOPS 8 + +/* + * This selects whether TX packets are sent one by one to the SMC91x internal + * memory and throttled until transmission completes. This may prevent + * RX overruns a litle by keeping much of the memory free for RX packets + * but to the expense of reduced TX throughput and increased IRQ overhead. + * Note this is not a cure for a too slow data bus or too high IRQ latency. + */ +#define THROTTLE_TX_PKTS 0 + +/* + * The MII clock high/low times. 2x this number gives the MII clock period + * in microseconds. (was 50, but this gives 6.4ms for each MII transaction!) + */ +#define MII_DELAY 1 + +#if SMC_DEBUG > 0 +#define DBG(n, args...) \ + do { \ + if (SMC_DEBUG >= (n)) \ + printk(args); \ + } while (0) + +#define PRINTK(args...) printk(args) +#else +#define DBG(n, args...) do { } while(0) +#define PRINTK(args...) printk(KERN_DEBUG args) +#endif + +#if SMC_DEBUG > 3 +static void PRINT_PKT(u_char *buf, int length) +{ + int i; + int remainder; + int lines; + + lines = length / 16; + remainder = length % 16; + + for (i = 0; i < lines ; i ++) { + int cur; + for (cur = 0; cur < 8; cur++) { + u_char a, b; + a = *buf++; + b = *buf++; + printk("%02x%02x ", a, b); + } + printk("\n"); + } + for (i = 0; i < remainder/2 ; i++) { + u_char a, b; + a = *buf++; + b = *buf++; + printk("%02x%02x ", a, b); + } + printk("\n"); +} +#else +#define PRINT_PKT(x...) do { } while(0) +#endif + + +/* this enables an interrupt in the interrupt mask register */ +#define SMC_ENABLE_INT(lp, x) do { \ + unsigned char mask; \ + unsigned long smc_enable_flags; \ + spin_lock_irqsave(&lp->lock, smc_enable_flags); \ + mask = SMC_GET_INT_MASK(lp); \ + mask |= (x); \ + SMC_SET_INT_MASK(lp, mask); \ + spin_unlock_irqrestore(&lp->lock, smc_enable_flags); \ +} while (0) + +/* this disables an interrupt from the interrupt mask register */ +#define SMC_DISABLE_INT(lp, x) do { \ + unsigned char mask; \ + unsigned long smc_disable_flags; \ + spin_lock_irqsave(&lp->lock, smc_disable_flags); \ + mask = SMC_GET_INT_MASK(lp); \ + mask &= ~(x); \ + SMC_SET_INT_MASK(lp, mask); \ + spin_unlock_irqrestore(&lp->lock, smc_disable_flags); \ +} while (0) + +/* + * Wait while MMU is busy. This is usually in the order of a few nanosecs + * if at all, but let's avoid deadlocking the system if the hardware + * decides to go south. + */ +#define SMC_WAIT_MMU_BUSY(lp) do { \ + if (unlikely(SMC_GET_MMU_CMD(lp) & MC_BUSY)) { \ + unsigned long timeout = jiffies + 2; \ + while (SMC_GET_MMU_CMD(lp) & MC_BUSY) { \ + if (time_after(jiffies, timeout)) { \ + printk("%s: timeout %s line %d\n", \ + dev->name, __FILE__, __LINE__); \ + break; \ + } \ + cpu_relax(); \ + } \ + } \ +} while (0) + + +/* + * this does a soft reset on the device + */ +static void smc_reset(struct net_device *dev) +{ + struct smc_local *lp = netdev_priv(dev); + void __iomem *ioaddr = lp->base; + unsigned int ctl, cfg; + struct sk_buff *pending_skb; + + DBG(2, "%s: %s\n", dev->name, __func__); + + /* Disable all interrupts, block TX tasklet */ + spin_lock_irq(&lp->lock); + SMC_SELECT_BANK(lp, 2); + SMC_SET_INT_MASK(lp, 0); + pending_skb = lp->pending_tx_skb; + lp->pending_tx_skb = NULL; + spin_unlock_irq(&lp->lock); + + /* free any pending tx skb */ + if (pending_skb) { + dev_kfree_skb(pending_skb); + dev->stats.tx_errors++; + dev->stats.tx_aborted_errors++; + } + + /* + * This resets the registers mostly to defaults, but doesn't + * affect EEPROM. That seems unnecessary + */ + SMC_SELECT_BANK(lp, 0); + SMC_SET_RCR(lp, RCR_SOFTRST); + + /* + * Setup the Configuration Register + * This is necessary because the CONFIG_REG is not affected + * by a soft reset + */ + SMC_SELECT_BANK(lp, 1); + + cfg = CONFIG_DEFAULT; + + /* + * Setup for fast accesses if requested. If the card/system + * can't handle it then there will be no recovery except for + * a hard reset or power cycle + */ + if (lp->cfg.flags & SMC91X_NOWAIT) + cfg |= CONFIG_NO_WAIT; + + /* + * Release from possible power-down state + * Configuration register is not affected by Soft Reset + */ + cfg |= CONFIG_EPH_POWER_EN; + + SMC_SET_CONFIG(lp, cfg); + + /* this should pause enough for the chip to be happy */ + /* + * elaborate? What does the chip _need_? --jgarzik + * + * This seems to be undocumented, but something the original + * driver(s) have always done. Suspect undocumented timing + * info/determined empirically. --rmk + */ + udelay(1); + + /* Disable transmit and receive functionality */ + SMC_SELECT_BANK(lp, 0); + SMC_SET_RCR(lp, RCR_CLEAR); + SMC_SET_TCR(lp, TCR_CLEAR); + + SMC_SELECT_BANK(lp, 1); + ctl = SMC_GET_CTL(lp) | CTL_LE_ENABLE; + + /* + * Set the control register to automatically release successfully + * transmitted packets, to make the best use out of our limited + * memory + */ + if(!THROTTLE_TX_PKTS) + ctl |= CTL_AUTO_RELEASE; + else + ctl &= ~CTL_AUTO_RELEASE; + SMC_SET_CTL(lp, ctl); + + /* Reset the MMU */ + SMC_SELECT_BANK(lp, 2); + SMC_SET_MMU_CMD(lp, MC_RESET); + SMC_WAIT_MMU_BUSY(lp); +} + +/* + * Enable Interrupts, Receive, and Transmit + */ +static void smc_enable(struct net_device *dev) +{ + struct smc_local *lp = netdev_priv(dev); + void __iomem *ioaddr = lp->base; + int mask; + + DBG(2, "%s: %s\n", dev->name, __func__); + + /* see the header file for options in TCR/RCR DEFAULT */ + SMC_SELECT_BANK(lp, 0); + SMC_SET_TCR(lp, lp->tcr_cur_mode); + SMC_SET_RCR(lp, lp->rcr_cur_mode); + + SMC_SELECT_BANK(lp, 1); + SMC_SET_MAC_ADDR(lp, dev->dev_addr); + + /* now, enable interrupts */ + mask = IM_EPH_INT|IM_RX_OVRN_INT|IM_RCV_INT; + if (lp->version >= (CHIP_91100 << 4)) + mask |= IM_MDINT; + SMC_SELECT_BANK(lp, 2); + SMC_SET_INT_MASK(lp, mask); + + /* + * From this point the register bank must _NOT_ be switched away + * to something else than bank 2 without proper locking against + * races with any tasklet or interrupt handlers until smc_shutdown() + * or smc_reset() is called. + */ +} + +/* + * this puts the device in an inactive state + */ +static void smc_shutdown(struct net_device *dev) +{ + struct smc_local *lp = netdev_priv(dev); + void __iomem *ioaddr = lp->base; + struct sk_buff *pending_skb; + + DBG(2, "%s: %s\n", CARDNAME, __func__); + + /* no more interrupts for me */ + spin_lock_irq(&lp->lock); + SMC_SELECT_BANK(lp, 2); + SMC_SET_INT_MASK(lp, 0); + pending_skb = lp->pending_tx_skb; + lp->pending_tx_skb = NULL; + spin_unlock_irq(&lp->lock); + if (pending_skb) + dev_kfree_skb(pending_skb); + + /* and tell the card to stay away from that nasty outside world */ + SMC_SELECT_BANK(lp, 0); + SMC_SET_RCR(lp, RCR_CLEAR); + SMC_SET_TCR(lp, TCR_CLEAR); + +#ifdef POWER_DOWN + /* finally, shut the chip down */ + SMC_SELECT_BANK(lp, 1); + SMC_SET_CONFIG(lp, SMC_GET_CONFIG(lp) & ~CONFIG_EPH_POWER_EN); +#endif +} + +/* + * This is the procedure to handle the receipt of a packet. + */ +static inline void smc_rcv(struct net_device *dev) +{ + struct smc_local *lp = netdev_priv(dev); + void __iomem *ioaddr = lp->base; + unsigned int packet_number, status, packet_len; + + DBG(3, "%s: %s\n", dev->name, __func__); + + packet_number = SMC_GET_RXFIFO(lp); + if (unlikely(packet_number & RXFIFO_REMPTY)) { + PRINTK("%s: smc_rcv with nothing on FIFO.\n", dev->name); + return; + } + + /* read from start of packet */ + SMC_SET_PTR(lp, PTR_READ | PTR_RCV | PTR_AUTOINC); + + /* First two words are status and packet length */ + SMC_GET_PKT_HDR(lp, status, packet_len); + packet_len &= 0x07ff; /* mask off top bits */ + DBG(2, "%s: RX PNR 0x%x STATUS 0x%04x LENGTH 0x%04x (%d)\n", + dev->name, packet_number, status, + packet_len, packet_len); + + back: + if (unlikely(packet_len < 6 || status & RS_ERRORS)) { + if (status & RS_TOOLONG && packet_len <= (1514 + 4 + 6)) { + /* accept VLAN packets */ + status &= ~RS_TOOLONG; + goto back; + } + if (packet_len < 6) { + /* bloody hardware */ + printk(KERN_ERR "%s: fubar (rxlen %u status %x\n", + dev->name, packet_len, status); + status |= RS_TOOSHORT; + } + SMC_WAIT_MMU_BUSY(lp); + SMC_SET_MMU_CMD(lp, MC_RELEASE); + dev->stats.rx_errors++; + if (status & RS_ALGNERR) + dev->stats.rx_frame_errors++; + if (status & (RS_TOOSHORT | RS_TOOLONG)) + dev->stats.rx_length_errors++; + if (status & RS_BADCRC) + dev->stats.rx_crc_errors++; + } else { + struct sk_buff *skb; + unsigned char *data; + unsigned int data_len; + + /* set multicast stats */ + if (status & RS_MULTICAST) + dev->stats.multicast++; + + /* + * Actual payload is packet_len - 6 (or 5 if odd byte). + * We want skb_reserve(2) and the final ctrl word + * (2 bytes, possibly containing the payload odd byte). + * Furthermore, we add 2 bytes to allow rounding up to + * multiple of 4 bytes on 32 bit buses. + * Hence packet_len - 6 + 2 + 2 + 2. + */ + skb = dev_alloc_skb(packet_len); + if (unlikely(skb == NULL)) { + printk(KERN_NOTICE "%s: Low memory, packet dropped.\n", + dev->name); + SMC_WAIT_MMU_BUSY(lp); + SMC_SET_MMU_CMD(lp, MC_RELEASE); + dev->stats.rx_dropped++; + return; + } + + /* Align IP header to 32 bits */ + skb_reserve(skb, 2); + + /* BUG: the LAN91C111 rev A never sets this bit. Force it. */ + if (lp->version == 0x90) + status |= RS_ODDFRAME; + + /* + * If odd length: packet_len - 5, + * otherwise packet_len - 6. + * With the trailing ctrl byte it's packet_len - 4. + */ + data_len = packet_len - ((status & RS_ODDFRAME) ? 5 : 6); + data = skb_put(skb, data_len); + SMC_PULL_DATA(lp, data, packet_len - 4); + + SMC_WAIT_MMU_BUSY(lp); + SMC_SET_MMU_CMD(lp, MC_RELEASE); + + PRINT_PKT(data, packet_len - 4); + + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + dev->stats.rx_packets++; + dev->stats.rx_bytes += data_len; + } +} + +#ifdef CONFIG_SMP +/* + * On SMP we have the following problem: + * + * A = smc_hardware_send_pkt() + * B = smc_hard_start_xmit() + * C = smc_interrupt() + * + * A and B can never be executed simultaneously. However, at least on UP, + * it is possible (and even desirable) for C to interrupt execution of + * A or B in order to have better RX reliability and avoid overruns. + * C, just like A and B, must have exclusive access to the chip and + * each of them must lock against any other concurrent access. + * Unfortunately this is not possible to have C suspend execution of A or + * B taking place on another CPU. On UP this is no an issue since A and B + * are run from softirq context and C from hard IRQ context, and there is + * no other CPU where concurrent access can happen. + * If ever there is a way to force at least B and C to always be executed + * on the same CPU then we could use read/write locks to protect against + * any other concurrent access and C would always interrupt B. But life + * isn't that easy in a SMP world... + */ +#define smc_special_trylock(lock, flags) \ +({ \ + int __ret; \ + local_irq_save(flags); \ + __ret = spin_trylock(lock); \ + if (!__ret) \ + local_irq_restore(flags); \ + __ret; \ +}) +#define smc_special_lock(lock, flags) spin_lock_irqsave(lock, flags) +#define smc_special_unlock(lock, flags) spin_unlock_irqrestore(lock, flags) +#else +#define smc_special_trylock(lock, flags) (flags == flags) +#define smc_special_lock(lock, flags) do { flags = 0; } while (0) +#define smc_special_unlock(lock, flags) do { flags = 0; } while (0) +#endif + +/* + * This is called to actually send a packet to the chip. + */ +static void smc_hardware_send_pkt(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + struct smc_local *lp = netdev_priv(dev); + void __iomem *ioaddr = lp->base; + struct sk_buff *skb; + unsigned int packet_no, len; + unsigned char *buf; + unsigned long flags; + + DBG(3, "%s: %s\n", dev->name, __func__); + + if (!smc_special_trylock(&lp->lock, flags)) { + netif_stop_queue(dev); + tasklet_schedule(&lp->tx_task); + return; + } + + skb = lp->pending_tx_skb; + if (unlikely(!skb)) { + smc_special_unlock(&lp->lock, flags); + return; + } + lp->pending_tx_skb = NULL; + + packet_no = SMC_GET_AR(lp); + if (unlikely(packet_no & AR_FAILED)) { + printk("%s: Memory allocation failed.\n", dev->name); + dev->stats.tx_errors++; + dev->stats.tx_fifo_errors++; + smc_special_unlock(&lp->lock, flags); + goto done; + } + + /* point to the beginning of the packet */ + SMC_SET_PN(lp, packet_no); + SMC_SET_PTR(lp, PTR_AUTOINC); + + buf = skb->data; + len = skb->len; + DBG(2, "%s: TX PNR 0x%x LENGTH 0x%04x (%d) BUF 0x%p\n", + dev->name, packet_no, len, len, buf); + PRINT_PKT(buf, len); + + /* + * Send the packet length (+6 for status words, length, and ctl. + * The card will pad to 64 bytes with zeroes if packet is too small. + */ + SMC_PUT_PKT_HDR(lp, 0, len + 6); + + /* send the actual data */ + SMC_PUSH_DATA(lp, buf, len & ~1); + + /* Send final ctl word with the last byte if there is one */ + SMC_outw(((len & 1) ? (0x2000 | buf[len-1]) : 0), ioaddr, DATA_REG(lp)); + + /* + * If THROTTLE_TX_PKTS is set, we stop the queue here. This will + * have the effect of having at most one packet queued for TX + * in the chip's memory at all time. + * + * If THROTTLE_TX_PKTS is not set then the queue is stopped only + * when memory allocation (MC_ALLOC) does not succeed right away. + */ + if (THROTTLE_TX_PKTS) + netif_stop_queue(dev); + + /* queue the packet for TX */ + SMC_SET_MMU_CMD(lp, MC_ENQUEUE); + smc_special_unlock(&lp->lock, flags); + + dev->trans_start = jiffies; + dev->stats.tx_packets++; + dev->stats.tx_bytes += len; + + SMC_ENABLE_INT(lp, IM_TX_INT | IM_TX_EMPTY_INT); + +done: if (!THROTTLE_TX_PKTS) + netif_wake_queue(dev); + + dev_kfree_skb(skb); +} + +/* + * Since I am not sure if I will have enough room in the chip's ram + * to store the packet, I call this routine which either sends it + * now, or set the card to generates an interrupt when ready + * for the packet. + */ +static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct smc_local *lp = netdev_priv(dev); + void __iomem *ioaddr = lp->base; + unsigned int numPages, poll_count, status; + unsigned long flags; + + DBG(3, "%s: %s\n", dev->name, __func__); + + BUG_ON(lp->pending_tx_skb != NULL); + + /* + * The MMU wants the number of pages to be the number of 256 bytes + * 'pages', minus 1 (since a packet can't ever have 0 pages :)) + * + * The 91C111 ignores the size bits, but earlier models don't. + * + * Pkt size for allocating is data length +6 (for additional status + * words, length and ctl) + * + * If odd size then last byte is included in ctl word. + */ + numPages = ((skb->len & ~1) + (6 - 1)) >> 8; + if (unlikely(numPages > 7)) { + printk("%s: Far too big packet error.\n", dev->name); + dev->stats.tx_errors++; + dev->stats.tx_dropped++; + dev_kfree_skb(skb); + return NETDEV_TX_OK; + } + + smc_special_lock(&lp->lock, flags); + + /* now, try to allocate the memory */ + SMC_SET_MMU_CMD(lp, MC_ALLOC | numPages); + + /* + * Poll the chip for a short amount of time in case the + * allocation succeeds quickly. + */ + poll_count = MEMORY_WAIT_TIME; + do { + status = SMC_GET_INT(lp); + if (status & IM_ALLOC_INT) { + SMC_ACK_INT(lp, IM_ALLOC_INT); + break; + } + } while (--poll_count); + + smc_special_unlock(&lp->lock, flags); + + lp->pending_tx_skb = skb; + if (!poll_count) { + /* oh well, wait until the chip finds memory later */ + netif_stop_queue(dev); + DBG(2, "%s: TX memory allocation deferred.\n", dev->name); + SMC_ENABLE_INT(lp, IM_ALLOC_INT); + } else { + /* + * Allocation succeeded: push packet to the chip's own memory + * immediately. + */ + smc_hardware_send_pkt((unsigned long)dev); + } + + return NETDEV_TX_OK; +} + +/* + * This handles a TX interrupt, which is only called when: + * - a TX error occurred, or + * - CTL_AUTO_RELEASE is not set and TX of a packet completed. + */ +static void smc_tx(struct net_device *dev) +{ + struct smc_local *lp = netdev_priv(dev); + void __iomem *ioaddr = lp->base; + unsigned int saved_packet, packet_no, tx_status, pkt_len; + + DBG(3, "%s: %s\n", dev->name, __func__); + + /* If the TX FIFO is empty then nothing to do */ + packet_no = SMC_GET_TXFIFO(lp); + if (unlikely(packet_no & TXFIFO_TEMPTY)) { + PRINTK("%s: smc_tx with nothing on FIFO.\n", dev->name); + return; + } + + /* select packet to read from */ + saved_packet = SMC_GET_PN(lp); + SMC_SET_PN(lp, packet_no); + + /* read the first word (status word) from this packet */ + SMC_SET_PTR(lp, PTR_AUTOINC | PTR_READ); + SMC_GET_PKT_HDR(lp, tx_status, pkt_len); + DBG(2, "%s: TX STATUS 0x%04x PNR 0x%02x\n", + dev->name, tx_status, packet_no); + + if (!(tx_status & ES_TX_SUC)) + dev->stats.tx_errors++; + + if (tx_status & ES_LOSTCARR) + dev->stats.tx_carrier_errors++; + + if (tx_status & (ES_LATCOL | ES_16COL)) { + PRINTK("%s: %s occurred on last xmit\n", dev->name, + (tx_status & ES_LATCOL) ? + "late collision" : "too many collisions"); + dev->stats.tx_window_errors++; + if (!(dev->stats.tx_window_errors & 63) && net_ratelimit()) { + printk(KERN_INFO "%s: unexpectedly large number of " + "bad collisions. Please check duplex " + "setting.\n", dev->name); + } + } + + /* kill the packet */ + SMC_WAIT_MMU_BUSY(lp); + SMC_SET_MMU_CMD(lp, MC_FREEPKT); + + /* Don't restore Packet Number Reg until busy bit is cleared */ + SMC_WAIT_MMU_BUSY(lp); + SMC_SET_PN(lp, saved_packet); + + /* re-enable transmit */ + SMC_SELECT_BANK(lp, 0); + SMC_SET_TCR(lp, lp->tcr_cur_mode); + SMC_SELECT_BANK(lp, 2); +} + + +/*---PHY CONTROL AND CONFIGURATION-----------------------------------------*/ + +static void smc_mii_out(struct net_device *dev, unsigned int val, int bits) +{ + struct smc_local *lp = netdev_priv(dev); + void __iomem *ioaddr = lp->base; + unsigned int mii_reg, mask; + + mii_reg = SMC_GET_MII(lp) & ~(MII_MCLK | MII_MDOE | MII_MDO); + mii_reg |= MII_MDOE; + + for (mask = 1 << (bits - 1); mask; mask >>= 1) { + if (val & mask) + mii_reg |= MII_MDO; + else + mii_reg &= ~MII_MDO; + + SMC_SET_MII(lp, mii_reg); + udelay(MII_DELAY); + SMC_SET_MII(lp, mii_reg | MII_MCLK); + udelay(MII_DELAY); + } +} + +static unsigned int smc_mii_in(struct net_device *dev, int bits) +{ + struct smc_local *lp = netdev_priv(dev); + void __iomem *ioaddr = lp->base; + unsigned int mii_reg, mask, val; + + mii_reg = SMC_GET_MII(lp) & ~(MII_MCLK | MII_MDOE | MII_MDO); + SMC_SET_MII(lp, mii_reg); + + for (mask = 1 << (bits - 1), val = 0; mask; mask >>= 1) { + if (SMC_GET_MII(lp) & MII_MDI) + val |= mask; + + SMC_SET_MII(lp, mii_reg); + udelay(MII_DELAY); + SMC_SET_MII(lp, mii_reg | MII_MCLK); + udelay(MII_DELAY); + } + + return val; +} + +/* + * Reads a register from the MII Management serial interface + */ +static int smc_phy_read(struct net_device *dev, int phyaddr, int phyreg) +{ + struct smc_local *lp = netdev_priv(dev); + void __iomem *ioaddr = lp->base; + unsigned int phydata; + + SMC_SELECT_BANK(lp, 3); + + /* Idle - 32 ones */ + smc_mii_out(dev, 0xffffffff, 32); + + /* Start code (01) + read (10) + phyaddr + phyreg */ + smc_mii_out(dev, 6 << 10 | phyaddr << 5 | phyreg, 14); + + /* Turnaround (2bits) + phydata */ + phydata = smc_mii_in(dev, 18); + + /* Return to idle state */ + SMC_SET_MII(lp, SMC_GET_MII(lp) & ~(MII_MCLK|MII_MDOE|MII_MDO)); + + DBG(3, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n", + __func__, phyaddr, phyreg, phydata); + + SMC_SELECT_BANK(lp, 2); + return phydata; +} + +/* + * Writes a register to the MII Management serial interface + */ +static void smc_phy_write(struct net_device *dev, int phyaddr, int phyreg, + int phydata) +{ + struct smc_local *lp = netdev_priv(dev); + void __iomem *ioaddr = lp->base; + + SMC_SELECT_BANK(lp, 3); + + /* Idle - 32 ones */ + smc_mii_out(dev, 0xffffffff, 32); + + /* Start code (01) + write (01) + phyaddr + phyreg + turnaround + phydata */ + smc_mii_out(dev, 5 << 28 | phyaddr << 23 | phyreg << 18 | 2 << 16 | phydata, 32); + + /* Return to idle state */ + SMC_SET_MII(lp, SMC_GET_MII(lp) & ~(MII_MCLK|MII_MDOE|MII_MDO)); + + DBG(3, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n", + __func__, phyaddr, phyreg, phydata); + + SMC_SELECT_BANK(lp, 2); +} + +/* + * Finds and reports the PHY address + */ +static void smc_phy_detect(struct net_device *dev) +{ + struct smc_local *lp = netdev_priv(dev); + int phyaddr; + + DBG(2, "%s: %s\n", dev->name, __func__); + + lp->phy_type = 0; + + /* + * Scan all 32 PHY addresses if necessary, starting at + * PHY#1 to PHY#31, and then PHY#0 last. + */ + for (phyaddr = 1; phyaddr < 33; ++phyaddr) { + unsigned int id1, id2; + + /* Read the PHY identifiers */ + id1 = smc_phy_read(dev, phyaddr & 31, MII_PHYSID1); + id2 = smc_phy_read(dev, phyaddr & 31, MII_PHYSID2); + + DBG(3, "%s: phy_id1=0x%x, phy_id2=0x%x\n", + dev->name, id1, id2); + + /* Make sure it is a valid identifier */ + if (id1 != 0x0000 && id1 != 0xffff && id1 != 0x8000 && + id2 != 0x0000 && id2 != 0xffff && id2 != 0x8000) { + /* Save the PHY's address */ + lp->mii.phy_id = phyaddr & 31; + lp->phy_type = id1 << 16 | id2; + break; + } + } +} + +/* + * Sets the PHY to a configuration as determined by the user + */ +static int smc_phy_fixed(struct net_device *dev) +{ + struct smc_local *lp = netdev_priv(dev); + void __iomem *ioaddr = lp->base; + int phyaddr = lp->mii.phy_id; + int bmcr, cfg1; + + DBG(3, "%s: %s\n", dev->name, __func__); + + /* Enter Link Disable state */ + cfg1 = smc_phy_read(dev, phyaddr, PHY_CFG1_REG); + cfg1 |= PHY_CFG1_LNKDIS; + smc_phy_write(dev, phyaddr, PHY_CFG1_REG, cfg1); + + /* + * Set our fixed capabilities + * Disable auto-negotiation + */ + bmcr = 0; + + if (lp->ctl_rfduplx) + bmcr |= BMCR_FULLDPLX; + + if (lp->ctl_rspeed == 100) + bmcr |= BMCR_SPEED100; + + /* Write our capabilities to the phy control register */ + smc_phy_write(dev, phyaddr, MII_BMCR, bmcr); + + /* Re-Configure the Receive/Phy Control register */ + SMC_SELECT_BANK(lp, 0); + SMC_SET_RPC(lp, lp->rpc_cur_mode); + SMC_SELECT_BANK(lp, 2); + + return 1; +} + +/* + * smc_phy_reset - reset the phy + * @dev: net device + * @phy: phy address + * + * Issue a software reset for the specified PHY and + * wait up to 100ms for the reset to complete. We should + * not access the PHY for 50ms after issuing the reset. + * + * The time to wait appears to be dependent on the PHY. + * + * Must be called with lp->lock locked. + */ +static int smc_phy_reset(struct net_device *dev, int phy) +{ + struct smc_local *lp = netdev_priv(dev); + unsigned int bmcr; + int timeout; + + smc_phy_write(dev, phy, MII_BMCR, BMCR_RESET); + + for (timeout = 2; timeout; timeout--) { + spin_unlock_irq(&lp->lock); + msleep(50); + spin_lock_irq(&lp->lock); + + bmcr = smc_phy_read(dev, phy, MII_BMCR); + if (!(bmcr & BMCR_RESET)) + break; + } + + return bmcr & BMCR_RESET; +} + +/* + * smc_phy_powerdown - powerdown phy + * @dev: net device + * + * Power down the specified PHY + */ +static void smc_phy_powerdown(struct net_device *dev) +{ + struct smc_local *lp = netdev_priv(dev); + unsigned int bmcr; + int phy = lp->mii.phy_id; + + if (lp->phy_type == 0) + return; + + /* We need to ensure that no calls to smc_phy_configure are + pending. + */ + cancel_work_sync(&lp->phy_configure); + + bmcr = smc_phy_read(dev, phy, MII_BMCR); + smc_phy_write(dev, phy, MII_BMCR, bmcr | BMCR_PDOWN); +} + +/* + * smc_phy_check_media - check the media status and adjust TCR + * @dev: net device + * @init: set true for initialisation + * + * Select duplex mode depending on negotiation state. This + * also updates our carrier state. + */ +static void smc_phy_check_media(struct net_device *dev, int init) +{ + struct smc_local *lp = netdev_priv(dev); + void __iomem *ioaddr = lp->base; + + if (mii_check_media(&lp->mii, netif_msg_link(lp), init)) { + /* duplex state has changed */ + if (lp->mii.full_duplex) { + lp->tcr_cur_mode |= TCR_SWFDUP; + } else { + lp->tcr_cur_mode &= ~TCR_SWFDUP; + } + + SMC_SELECT_BANK(lp, 0); + SMC_SET_TCR(lp, lp->tcr_cur_mode); + } +} + +/* + * Configures the specified PHY through the MII management interface + * using Autonegotiation. + * Calls smc_phy_fixed() if the user has requested a certain config. + * If RPC ANEG bit is set, the media selection is dependent purely on + * the selection by the MII (either in the MII BMCR reg or the result + * of autonegotiation.) If the RPC ANEG bit is cleared, the selection + * is controlled by the RPC SPEED and RPC DPLX bits. + */ +static void smc_phy_configure(struct work_struct *work) +{ + struct smc_local *lp = + container_of(work, struct smc_local, phy_configure); + struct net_device *dev = lp->dev; + void __iomem *ioaddr = lp->base; + int phyaddr = lp->mii.phy_id; + int my_phy_caps; /* My PHY capabilities */ + int my_ad_caps; /* My Advertised capabilities */ + int status; + + DBG(3, "%s:smc_program_phy()\n", dev->name); + + spin_lock_irq(&lp->lock); + + /* + * We should not be called if phy_type is zero. + */ + if (lp->phy_type == 0) + goto smc_phy_configure_exit; + + if (smc_phy_reset(dev, phyaddr)) { + printk("%s: PHY reset timed out\n", dev->name); + goto smc_phy_configure_exit; + } + + /* + * Enable PHY Interrupts (for register 18) + * Interrupts listed here are disabled + */ + smc_phy_write(dev, phyaddr, PHY_MASK_REG, + PHY_INT_LOSSSYNC | PHY_INT_CWRD | PHY_INT_SSD | + PHY_INT_ESD | PHY_INT_RPOL | PHY_INT_JAB | + PHY_INT_SPDDET | PHY_INT_DPLXDET); + + /* Configure the Receive/Phy Control register */ + SMC_SELECT_BANK(lp, 0); + SMC_SET_RPC(lp, lp->rpc_cur_mode); + + /* If the user requested no auto neg, then go set his request */ + if (lp->mii.force_media) { + smc_phy_fixed(dev); + goto smc_phy_configure_exit; + } + + /* Copy our capabilities from MII_BMSR to MII_ADVERTISE */ + my_phy_caps = smc_phy_read(dev, phyaddr, MII_BMSR); + + if (!(my_phy_caps & BMSR_ANEGCAPABLE)) { + printk(KERN_INFO "Auto negotiation NOT supported\n"); + smc_phy_fixed(dev); + goto smc_phy_configure_exit; + } + + my_ad_caps = ADVERTISE_CSMA; /* I am CSMA capable */ + + if (my_phy_caps & BMSR_100BASE4) + my_ad_caps |= ADVERTISE_100BASE4; + if (my_phy_caps & BMSR_100FULL) + my_ad_caps |= ADVERTISE_100FULL; + if (my_phy_caps & BMSR_100HALF) + my_ad_caps |= ADVERTISE_100HALF; + if (my_phy_caps & BMSR_10FULL) + my_ad_caps |= ADVERTISE_10FULL; + if (my_phy_caps & BMSR_10HALF) + my_ad_caps |= ADVERTISE_10HALF; + + /* Disable capabilities not selected by our user */ + if (lp->ctl_rspeed != 100) + my_ad_caps &= ~(ADVERTISE_100BASE4|ADVERTISE_100FULL|ADVERTISE_100HALF); + + if (!lp->ctl_rfduplx) + my_ad_caps &= ~(ADVERTISE_100FULL|ADVERTISE_10FULL); + + /* Update our Auto-Neg Advertisement Register */ + smc_phy_write(dev, phyaddr, MII_ADVERTISE, my_ad_caps); + lp->mii.advertising = my_ad_caps; + + /* + * Read the register back. Without this, it appears that when + * auto-negotiation is restarted, sometimes it isn't ready and + * the link does not come up. + */ + status = smc_phy_read(dev, phyaddr, MII_ADVERTISE); + + DBG(2, "%s: phy caps=%x\n", dev->name, my_phy_caps); + DBG(2, "%s: phy advertised caps=%x\n", dev->name, my_ad_caps); + + /* Restart auto-negotiation process in order to advertise my caps */ + smc_phy_write(dev, phyaddr, MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART); + + smc_phy_check_media(dev, 1); + +smc_phy_configure_exit: + SMC_SELECT_BANK(lp, 2); + spin_unlock_irq(&lp->lock); +} + +/* + * smc_phy_interrupt + * + * Purpose: Handle interrupts relating to PHY register 18. This is + * called from the "hard" interrupt handler under our private spinlock. + */ +static void smc_phy_interrupt(struct net_device *dev) +{ + struct smc_local *lp = netdev_priv(dev); + int phyaddr = lp->mii.phy_id; + int phy18; + + DBG(2, "%s: %s\n", dev->name, __func__); + + if (lp->phy_type == 0) + return; + + for(;;) { + smc_phy_check_media(dev, 0); + + /* Read PHY Register 18, Status Output */ + phy18 = smc_phy_read(dev, phyaddr, PHY_INT_REG); + if ((phy18 & PHY_INT_INT) == 0) + break; + } +} + +/*--- END PHY CONTROL AND CONFIGURATION-------------------------------------*/ + +static void smc_10bt_check_media(struct net_device *dev, int init) +{ + struct smc_local *lp = netdev_priv(dev); + void __iomem *ioaddr = lp->base; + unsigned int old_carrier, new_carrier; + + old_carrier = netif_carrier_ok(dev) ? 1 : 0; + + SMC_SELECT_BANK(lp, 0); + new_carrier = (SMC_GET_EPH_STATUS(lp) & ES_LINK_OK) ? 1 : 0; + SMC_SELECT_BANK(lp, 2); + + if (init || (old_carrier != new_carrier)) { + if (!new_carrier) { + netif_carrier_off(dev); + } else { + netif_carrier_on(dev); + } + if (netif_msg_link(lp)) + printk(KERN_INFO "%s: link %s\n", dev->name, + new_carrier ? "up" : "down"); + } +} + +static void smc_eph_interrupt(struct net_device *dev) +{ + struct smc_local *lp = netdev_priv(dev); + void __iomem *ioaddr = lp->base; + unsigned int ctl; + + smc_10bt_check_media(dev, 0); + + SMC_SELECT_BANK(lp, 1); + ctl = SMC_GET_CTL(lp); + SMC_SET_CTL(lp, ctl & ~CTL_LE_ENABLE); + SMC_SET_CTL(lp, ctl); + SMC_SELECT_BANK(lp, 2); +} + +/* + * This is the main routine of the driver, to handle the device when + * it needs some attention. + */ +static irqreturn_t smc_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct smc_local *lp = netdev_priv(dev); + void __iomem *ioaddr = lp->base; + int status, mask, timeout, card_stats; + int saved_pointer; + + DBG(3, "%s: %s\n", dev->name, __func__); + + spin_lock(&lp->lock); + + /* A preamble may be used when there is a potential race + * between the interruptible transmit functions and this + * ISR. */ + SMC_INTERRUPT_PREAMBLE; + + saved_pointer = SMC_GET_PTR(lp); + mask = SMC_GET_INT_MASK(lp); + SMC_SET_INT_MASK(lp, 0); + + /* set a timeout value, so I don't stay here forever */ + timeout = MAX_IRQ_LOOPS; + + do { + status = SMC_GET_INT(lp); + + DBG(2, "%s: INT 0x%02x MASK 0x%02x MEM 0x%04x FIFO 0x%04x\n", + dev->name, status, mask, + ({ int meminfo; SMC_SELECT_BANK(lp, 0); + meminfo = SMC_GET_MIR(lp); + SMC_SELECT_BANK(lp, 2); meminfo; }), + SMC_GET_FIFO(lp)); + + status &= mask; + if (!status) + break; + + if (status & IM_TX_INT) { + /* do this before RX as it will free memory quickly */ + DBG(3, "%s: TX int\n", dev->name); + smc_tx(dev); + SMC_ACK_INT(lp, IM_TX_INT); + if (THROTTLE_TX_PKTS) + netif_wake_queue(dev); + } else if (status & IM_RCV_INT) { + DBG(3, "%s: RX irq\n", dev->name); + smc_rcv(dev); + } else if (status & IM_ALLOC_INT) { + DBG(3, "%s: Allocation irq\n", dev->name); + tasklet_hi_schedule(&lp->tx_task); + mask &= ~IM_ALLOC_INT; + } else if (status & IM_TX_EMPTY_INT) { + DBG(3, "%s: TX empty\n", dev->name); + mask &= ~IM_TX_EMPTY_INT; + + /* update stats */ + SMC_SELECT_BANK(lp, 0); + card_stats = SMC_GET_COUNTER(lp); + SMC_SELECT_BANK(lp, 2); + + /* single collisions */ + dev->stats.collisions += card_stats & 0xF; + card_stats >>= 4; + + /* multiple collisions */ + dev->stats.collisions += card_stats & 0xF; + } else if (status & IM_RX_OVRN_INT) { + DBG(1, "%s: RX overrun (EPH_ST 0x%04x)\n", dev->name, + ({ int eph_st; SMC_SELECT_BANK(lp, 0); + eph_st = SMC_GET_EPH_STATUS(lp); + SMC_SELECT_BANK(lp, 2); eph_st; })); + SMC_ACK_INT(lp, IM_RX_OVRN_INT); + dev->stats.rx_errors++; + dev->stats.rx_fifo_errors++; + } else if (status & IM_EPH_INT) { + smc_eph_interrupt(dev); + } else if (status & IM_MDINT) { + SMC_ACK_INT(lp, IM_MDINT); + smc_phy_interrupt(dev); + } else if (status & IM_ERCV_INT) { + SMC_ACK_INT(lp, IM_ERCV_INT); + PRINTK("%s: UNSUPPORTED: ERCV INTERRUPT\n", dev->name); + } + } while (--timeout); + + /* restore register states */ + SMC_SET_PTR(lp, saved_pointer); + SMC_SET_INT_MASK(lp, mask); + spin_unlock(&lp->lock); + +#ifndef CONFIG_NET_POLL_CONTROLLER + if (timeout == MAX_IRQ_LOOPS) + PRINTK("%s: spurious interrupt (mask = 0x%02x)\n", + dev->name, mask); +#endif + DBG(3, "%s: Interrupt done (%d loops)\n", + dev->name, MAX_IRQ_LOOPS - timeout); + + /* + * We return IRQ_HANDLED unconditionally here even if there was + * nothing to do. There is a possibility that a packet might + * get enqueued into the chip right after TX_EMPTY_INT is raised + * but just before the CPU acknowledges the IRQ. + * Better take an unneeded IRQ in some occasions than complexifying + * the code for all cases. + */ + return IRQ_HANDLED; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Polling receive - used by netconsole and other diagnostic tools + * to allow network i/o with interrupts disabled. + */ +static void smc_poll_controller(struct net_device *dev) +{ + disable_irq(dev->irq); + smc_interrupt(dev->irq, dev); + enable_irq(dev->irq); +} +#endif + +/* Our watchdog timed out. Called by the networking layer */ +static void smc_timeout(struct net_device *dev) +{ + struct smc_local *lp = netdev_priv(dev); + void __iomem *ioaddr = lp->base; + int status, mask, eph_st, meminfo, fifo; + + DBG(2, "%s: %s\n", dev->name, __func__); + + spin_lock_irq(&lp->lock); + status = SMC_GET_INT(lp); + mask = SMC_GET_INT_MASK(lp); + fifo = SMC_GET_FIFO(lp); + SMC_SELECT_BANK(lp, 0); + eph_st = SMC_GET_EPH_STATUS(lp); + meminfo = SMC_GET_MIR(lp); + SMC_SELECT_BANK(lp, 2); + spin_unlock_irq(&lp->lock); + PRINTK( "%s: TX timeout (INT 0x%02x INTMASK 0x%02x " + "MEM 0x%04x FIFO 0x%04x EPH_ST 0x%04x)\n", + dev->name, status, mask, meminfo, fifo, eph_st ); + + smc_reset(dev); + smc_enable(dev); + + /* + * Reconfiguring the PHY doesn't seem like a bad idea here, but + * smc_phy_configure() calls msleep() which calls schedule_timeout() + * which calls schedule(). Hence we use a work queue. + */ + if (lp->phy_type != 0) + schedule_work(&lp->phy_configure); + + /* We can accept TX packets again */ + dev->trans_start = jiffies; /* prevent tx timeout */ + netif_wake_queue(dev); +} + +/* + * This routine will, depending on the values passed to it, + * either make it accept multicast packets, go into + * promiscuous mode (for TCPDUMP and cousins) or accept + * a select set of multicast packets + */ +static void smc_set_multicast_list(struct net_device *dev) +{ + struct smc_local *lp = netdev_priv(dev); + void __iomem *ioaddr = lp->base; + unsigned char multicast_table[8]; + int update_multicast = 0; + + DBG(2, "%s: %s\n", dev->name, __func__); + + if (dev->flags & IFF_PROMISC) { + DBG(2, "%s: RCR_PRMS\n", dev->name); + lp->rcr_cur_mode |= RCR_PRMS; + } + +/* BUG? I never disable promiscuous mode if multicasting was turned on. + Now, I turn off promiscuous mode, but I don't do anything to multicasting + when promiscuous mode is turned on. +*/ + + /* + * Here, I am setting this to accept all multicast packets. + * I don't need to zero the multicast table, because the flag is + * checked before the table is + */ + else if (dev->flags & IFF_ALLMULTI || netdev_mc_count(dev) > 16) { + DBG(2, "%s: RCR_ALMUL\n", dev->name); + lp->rcr_cur_mode |= RCR_ALMUL; + } + + /* + * This sets the internal hardware table to filter out unwanted + * multicast packets before they take up memory. + * + * The SMC chip uses a hash table where the high 6 bits of the CRC of + * address are the offset into the table. If that bit is 1, then the + * multicast packet is accepted. Otherwise, it's dropped silently. + * + * To use the 6 bits as an offset into the table, the high 3 bits are + * the number of the 8 bit register, while the low 3 bits are the bit + * within that register. + */ + else if (!netdev_mc_empty(dev)) { + struct netdev_hw_addr *ha; + + /* table for flipping the order of 3 bits */ + static const unsigned char invert3[] = {0, 4, 2, 6, 1, 5, 3, 7}; + + /* start with a table of all zeros: reject all */ + memset(multicast_table, 0, sizeof(multicast_table)); + + netdev_for_each_mc_addr(ha, dev) { + int position; + + /* only use the low order bits */ + position = crc32_le(~0, ha->addr, 6) & 0x3f; + + /* do some messy swapping to put the bit in the right spot */ + multicast_table[invert3[position&7]] |= + (1<<invert3[(position>>3)&7]); + } + + /* be sure I get rid of flags I might have set */ + lp->rcr_cur_mode &= ~(RCR_PRMS | RCR_ALMUL); + + /* now, the table can be loaded into the chipset */ + update_multicast = 1; + } else { + DBG(2, "%s: ~(RCR_PRMS|RCR_ALMUL)\n", dev->name); + lp->rcr_cur_mode &= ~(RCR_PRMS | RCR_ALMUL); + + /* + * since I'm disabling all multicast entirely, I need to + * clear the multicast list + */ + memset(multicast_table, 0, sizeof(multicast_table)); + update_multicast = 1; + } + + spin_lock_irq(&lp->lock); + SMC_SELECT_BANK(lp, 0); + SMC_SET_RCR(lp, lp->rcr_cur_mode); + if (update_multicast) { + SMC_SELECT_BANK(lp, 3); + SMC_SET_MCAST(lp, multicast_table); + } + SMC_SELECT_BANK(lp, 2); + spin_unlock_irq(&lp->lock); +} + + +/* + * Open and Initialize the board + * + * Set up everything, reset the card, etc.. + */ +static int +smc_open(struct net_device *dev) +{ + struct smc_local *lp = netdev_priv(dev); + + DBG(2, "%s: %s\n", dev->name, __func__); + + /* + * Check that the address is valid. If its not, refuse + * to bring the device up. The user must specify an + * address using ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx + */ + if (!is_valid_ether_addr(dev->dev_addr)) { + PRINTK("%s: no valid ethernet hw addr\n", __func__); + return -EINVAL; + } + + /* Setup the default Register Modes */ + lp->tcr_cur_mode = TCR_DEFAULT; + lp->rcr_cur_mode = RCR_DEFAULT; + lp->rpc_cur_mode = RPC_DEFAULT | + lp->cfg.leda << RPC_LSXA_SHFT | + lp->cfg.ledb << RPC_LSXB_SHFT; + + /* + * If we are not using a MII interface, we need to + * monitor our own carrier signal to detect faults. + */ + if (lp->phy_type == 0) + lp->tcr_cur_mode |= TCR_MON_CSN; + + /* reset the hardware */ + smc_reset(dev); + smc_enable(dev); + + /* Configure the PHY, initialize the link state */ + if (lp->phy_type != 0) + smc_phy_configure(&lp->phy_configure); + else { + spin_lock_irq(&lp->lock); + smc_10bt_check_media(dev, 1); + spin_unlock_irq(&lp->lock); + } + + netif_start_queue(dev); + return 0; +} + +/* + * smc_close + * + * this makes the board clean up everything that it can + * and not talk to the outside world. Caused by + * an 'ifconfig ethX down' + */ +static int smc_close(struct net_device *dev) +{ + struct smc_local *lp = netdev_priv(dev); + + DBG(2, "%s: %s\n", dev->name, __func__); + + netif_stop_queue(dev); + netif_carrier_off(dev); + + /* clear everything */ + smc_shutdown(dev); + tasklet_kill(&lp->tx_task); + smc_phy_powerdown(dev); + return 0; +} + +/* + * Ethtool support + */ +static int +smc_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct smc_local *lp = netdev_priv(dev); + int ret; + + cmd->maxtxpkt = 1; + cmd->maxrxpkt = 1; + + if (lp->phy_type != 0) { + spin_lock_irq(&lp->lock); + ret = mii_ethtool_gset(&lp->mii, cmd); + spin_unlock_irq(&lp->lock); + } else { + cmd->supported = SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_TP | SUPPORTED_AUI; + + if (lp->ctl_rspeed == 10) + ethtool_cmd_speed_set(cmd, SPEED_10); + else if (lp->ctl_rspeed == 100) + ethtool_cmd_speed_set(cmd, SPEED_100); + + cmd->autoneg = AUTONEG_DISABLE; + cmd->transceiver = XCVR_INTERNAL; + cmd->port = 0; + cmd->duplex = lp->tcr_cur_mode & TCR_SWFDUP ? DUPLEX_FULL : DUPLEX_HALF; + + ret = 0; + } + + return ret; +} + +static int +smc_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct smc_local *lp = netdev_priv(dev); + int ret; + + if (lp->phy_type != 0) { + spin_lock_irq(&lp->lock); + ret = mii_ethtool_sset(&lp->mii, cmd); + spin_unlock_irq(&lp->lock); + } else { + if (cmd->autoneg != AUTONEG_DISABLE || + cmd->speed != SPEED_10 || + (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL) || + (cmd->port != PORT_TP && cmd->port != PORT_AUI)) + return -EINVAL; + +// lp->port = cmd->port; + lp->ctl_rfduplx = cmd->duplex == DUPLEX_FULL; + +// if (netif_running(dev)) +// smc_set_port(dev); + + ret = 0; + } + + return ret; +} + +static void +smc_ethtool_getdrvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + strncpy(info->driver, CARDNAME, sizeof(info->driver)); + strncpy(info->version, version, sizeof(info->version)); + strncpy(info->bus_info, dev_name(dev->dev.parent), sizeof(info->bus_info)); +} + +static int smc_ethtool_nwayreset(struct net_device *dev) +{ + struct smc_local *lp = netdev_priv(dev); + int ret = -EINVAL; + + if (lp->phy_type != 0) { + spin_lock_irq(&lp->lock); + ret = mii_nway_restart(&lp->mii); + spin_unlock_irq(&lp->lock); + } + + return ret; +} + +static u32 smc_ethtool_getmsglevel(struct net_device *dev) +{ + struct smc_local *lp = netdev_priv(dev); + return lp->msg_enable; +} + +static void smc_ethtool_setmsglevel(struct net_device *dev, u32 level) +{ + struct smc_local *lp = netdev_priv(dev); + lp->msg_enable = level; +} + +static int smc_write_eeprom_word(struct net_device *dev, u16 addr, u16 word) +{ + u16 ctl; + struct smc_local *lp = netdev_priv(dev); + void __iomem *ioaddr = lp->base; + + spin_lock_irq(&lp->lock); + /* load word into GP register */ + SMC_SELECT_BANK(lp, 1); + SMC_SET_GP(lp, word); + /* set the address to put the data in EEPROM */ + SMC_SELECT_BANK(lp, 2); + SMC_SET_PTR(lp, addr); + /* tell it to write */ + SMC_SELECT_BANK(lp, 1); + ctl = SMC_GET_CTL(lp); + SMC_SET_CTL(lp, ctl | (CTL_EEPROM_SELECT | CTL_STORE)); + /* wait for it to finish */ + do { + udelay(1); + } while (SMC_GET_CTL(lp) & CTL_STORE); + /* clean up */ + SMC_SET_CTL(lp, ctl); + SMC_SELECT_BANK(lp, 2); + spin_unlock_irq(&lp->lock); + return 0; +} + +static int smc_read_eeprom_word(struct net_device *dev, u16 addr, u16 *word) +{ + u16 ctl; + struct smc_local *lp = netdev_priv(dev); + void __iomem *ioaddr = lp->base; + + spin_lock_irq(&lp->lock); + /* set the EEPROM address to get the data from */ + SMC_SELECT_BANK(lp, 2); + SMC_SET_PTR(lp, addr | PTR_READ); + /* tell it to load */ + SMC_SELECT_BANK(lp, 1); + SMC_SET_GP(lp, 0xffff); /* init to known */ + ctl = SMC_GET_CTL(lp); + SMC_SET_CTL(lp, ctl | (CTL_EEPROM_SELECT | CTL_RELOAD)); + /* wait for it to finish */ + do { + udelay(1); + } while (SMC_GET_CTL(lp) & CTL_RELOAD); + /* read word from GP register */ + *word = SMC_GET_GP(lp); + /* clean up */ + SMC_SET_CTL(lp, ctl); + SMC_SELECT_BANK(lp, 2); + spin_unlock_irq(&lp->lock); + return 0; +} + +static int smc_ethtool_geteeprom_len(struct net_device *dev) +{ + return 0x23 * 2; +} + +static int smc_ethtool_geteeprom(struct net_device *dev, + struct ethtool_eeprom *eeprom, u8 *data) +{ + int i; + int imax; + + DBG(1, "Reading %d bytes at %d(0x%x)\n", + eeprom->len, eeprom->offset, eeprom->offset); + imax = smc_ethtool_geteeprom_len(dev); + for (i = 0; i < eeprom->len; i += 2) { + int ret; + u16 wbuf; + int offset = i + eeprom->offset; + if (offset > imax) + break; + ret = smc_read_eeprom_word(dev, offset >> 1, &wbuf); + if (ret != 0) + return ret; + DBG(2, "Read 0x%x from 0x%x\n", wbuf, offset >> 1); + data[i] = (wbuf >> 8) & 0xff; + data[i+1] = wbuf & 0xff; + } + return 0; +} + +static int smc_ethtool_seteeprom(struct net_device *dev, + struct ethtool_eeprom *eeprom, u8 *data) +{ + int i; + int imax; + + DBG(1, "Writing %d bytes to %d(0x%x)\n", + eeprom->len, eeprom->offset, eeprom->offset); + imax = smc_ethtool_geteeprom_len(dev); + for (i = 0; i < eeprom->len; i += 2) { + int ret; + u16 wbuf; + int offset = i + eeprom->offset; + if (offset > imax) + break; + wbuf = (data[i] << 8) | data[i + 1]; + DBG(2, "Writing 0x%x to 0x%x\n", wbuf, offset >> 1); + ret = smc_write_eeprom_word(dev, offset >> 1, wbuf); + if (ret != 0) + return ret; + } + return 0; +} + + +static const struct ethtool_ops smc_ethtool_ops = { + .get_settings = smc_ethtool_getsettings, + .set_settings = smc_ethtool_setsettings, + .get_drvinfo = smc_ethtool_getdrvinfo, + + .get_msglevel = smc_ethtool_getmsglevel, + .set_msglevel = smc_ethtool_setmsglevel, + .nway_reset = smc_ethtool_nwayreset, + .get_link = ethtool_op_get_link, + .get_eeprom_len = smc_ethtool_geteeprom_len, + .get_eeprom = smc_ethtool_geteeprom, + .set_eeprom = smc_ethtool_seteeprom, +}; + +static const struct net_device_ops smc_netdev_ops = { + .ndo_open = smc_open, + .ndo_stop = smc_close, + .ndo_start_xmit = smc_hard_start_xmit, + .ndo_tx_timeout = smc_timeout, + .ndo_set_rx_mode = smc_set_multicast_list, + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = smc_poll_controller, +#endif +}; + +/* + * smc_findirq + * + * This routine has a simple purpose -- make the SMC chip generate an + * interrupt, so an auto-detect routine can detect it, and find the IRQ, + */ +/* + * does this still work? + * + * I just deleted auto_irq.c, since it was never built... + * --jgarzik + */ +static int __devinit smc_findirq(struct smc_local *lp) +{ + void __iomem *ioaddr = lp->base; + int timeout = 20; + unsigned long cookie; + + DBG(2, "%s: %s\n", CARDNAME, __func__); + + cookie = probe_irq_on(); + + /* + * What I try to do here is trigger an ALLOC_INT. This is done + * by allocating a small chunk of memory, which will give an interrupt + * when done. + */ + /* enable ALLOCation interrupts ONLY */ + SMC_SELECT_BANK(lp, 2); + SMC_SET_INT_MASK(lp, IM_ALLOC_INT); + + /* + * Allocate 512 bytes of memory. Note that the chip was just + * reset so all the memory is available + */ + SMC_SET_MMU_CMD(lp, MC_ALLOC | 1); + + /* + * Wait until positive that the interrupt has been generated + */ + do { + int int_status; + udelay(10); + int_status = SMC_GET_INT(lp); + if (int_status & IM_ALLOC_INT) + break; /* got the interrupt */ + } while (--timeout); + + /* + * there is really nothing that I can do here if timeout fails, + * as autoirq_report will return a 0 anyway, which is what I + * want in this case. Plus, the clean up is needed in both + * cases. + */ + + /* and disable all interrupts again */ + SMC_SET_INT_MASK(lp, 0); + + /* and return what I found */ + return probe_irq_off(cookie); +} + +/* + * Function: smc_probe(unsigned long ioaddr) + * + * Purpose: + * Tests to see if a given ioaddr points to an SMC91x chip. + * Returns a 0 on success + * + * Algorithm: + * (1) see if the high byte of BANK_SELECT is 0x33 + * (2) compare the ioaddr with the base register's address + * (3) see if I recognize the chip ID in the appropriate register + * + * Here I do typical initialization tasks. + * + * o Initialize the structure if needed + * o print out my vanity message if not done so already + * o print out what type of hardware is detected + * o print out the ethernet address + * o find the IRQ + * o set up my private data + * o configure the dev structure with my subroutines + * o actually GRAB the irq. + * o GRAB the region + */ +static int __devinit smc_probe(struct net_device *dev, void __iomem *ioaddr, + unsigned long irq_flags) +{ + struct smc_local *lp = netdev_priv(dev); + static int version_printed = 0; + int retval; + unsigned int val, revision_register; + const char *version_string; + + DBG(2, "%s: %s\n", CARDNAME, __func__); + + /* First, see if the high byte is 0x33 */ + val = SMC_CURRENT_BANK(lp); + DBG(2, "%s: bank signature probe returned 0x%04x\n", CARDNAME, val); + if ((val & 0xFF00) != 0x3300) { + if ((val & 0xFF) == 0x33) { + printk(KERN_WARNING + "%s: Detected possible byte-swapped interface" + " at IOADDR %p\n", CARDNAME, ioaddr); + } + retval = -ENODEV; + goto err_out; + } + + /* + * The above MIGHT indicate a device, but I need to write to + * further test this. + */ + SMC_SELECT_BANK(lp, 0); + val = SMC_CURRENT_BANK(lp); + if ((val & 0xFF00) != 0x3300) { + retval = -ENODEV; + goto err_out; + } + + /* + * well, we've already written once, so hopefully another + * time won't hurt. This time, I need to switch the bank + * register to bank 1, so I can access the base address + * register + */ + SMC_SELECT_BANK(lp, 1); + val = SMC_GET_BASE(lp); + val = ((val & 0x1F00) >> 3) << SMC_IO_SHIFT; + if (((unsigned int)ioaddr & (0x3e0 << SMC_IO_SHIFT)) != val) { + printk("%s: IOADDR %p doesn't match configuration (%x).\n", + CARDNAME, ioaddr, val); + } + + /* + * check if the revision register is something that I + * recognize. These might need to be added to later, + * as future revisions could be added. + */ + SMC_SELECT_BANK(lp, 3); + revision_register = SMC_GET_REV(lp); + DBG(2, "%s: revision = 0x%04x\n", CARDNAME, revision_register); + version_string = chip_ids[ (revision_register >> 4) & 0xF]; + if (!version_string || (revision_register & 0xff00) != 0x3300) { + /* I don't recognize this chip, so... */ + printk("%s: IO %p: Unrecognized revision register 0x%04x" + ", Contact author.\n", CARDNAME, + ioaddr, revision_register); + + retval = -ENODEV; + goto err_out; + } + + /* At this point I'll assume that the chip is an SMC91x. */ + if (version_printed++ == 0) + printk("%s", version); + + /* fill in some of the fields */ + dev->base_addr = (unsigned long)ioaddr; + lp->base = ioaddr; + lp->version = revision_register & 0xff; + spin_lock_init(&lp->lock); + + /* Get the MAC address */ + SMC_SELECT_BANK(lp, 1); + SMC_GET_MAC_ADDR(lp, dev->dev_addr); + + /* now, reset the chip, and put it into a known state */ + smc_reset(dev); + + /* + * If dev->irq is 0, then the device has to be banged on to see + * what the IRQ is. + * + * This banging doesn't always detect the IRQ, for unknown reasons. + * a workaround is to reset the chip and try again. + * + * Interestingly, the DOS packet driver *SETS* the IRQ on the card to + * be what is requested on the command line. I don't do that, mostly + * because the card that I have uses a non-standard method of accessing + * the IRQs, and because this _should_ work in most configurations. + * + * Specifying an IRQ is done with the assumption that the user knows + * what (s)he is doing. No checking is done!!!! + */ + if (dev->irq < 1) { + int trials; + + trials = 3; + while (trials--) { + dev->irq = smc_findirq(lp); + if (dev->irq) + break; + /* kick the card and try again */ + smc_reset(dev); + } + } + if (dev->irq == 0) { + printk("%s: Couldn't autodetect your IRQ. Use irq=xx.\n", + dev->name); + retval = -ENODEV; + goto err_out; + } + dev->irq = irq_canonicalize(dev->irq); + + /* Fill in the fields of the device structure with ethernet values. */ + ether_setup(dev); + + dev->watchdog_timeo = msecs_to_jiffies(watchdog); + dev->netdev_ops = &smc_netdev_ops; + dev->ethtool_ops = &smc_ethtool_ops; + + tasklet_init(&lp->tx_task, smc_hardware_send_pkt, (unsigned long)dev); + INIT_WORK(&lp->phy_configure, smc_phy_configure); + lp->dev = dev; + lp->mii.phy_id_mask = 0x1f; + lp->mii.reg_num_mask = 0x1f; + lp->mii.force_media = 0; + lp->mii.full_duplex = 0; + lp->mii.dev = dev; + lp->mii.mdio_read = smc_phy_read; + lp->mii.mdio_write = smc_phy_write; + + /* + * Locate the phy, if any. + */ + if (lp->version >= (CHIP_91100 << 4)) + smc_phy_detect(dev); + + /* then shut everything down to save power */ + smc_shutdown(dev); + smc_phy_powerdown(dev); + + /* Set default parameters */ + lp->msg_enable = NETIF_MSG_LINK; + lp->ctl_rfduplx = 0; + lp->ctl_rspeed = 10; + + if (lp->version >= (CHIP_91100 << 4)) { + lp->ctl_rfduplx = 1; + lp->ctl_rspeed = 100; + } + + /* Grab the IRQ */ + retval = request_irq(dev->irq, smc_interrupt, irq_flags, dev->name, dev); + if (retval) + goto err_out; + +#ifdef CONFIG_ARCH_PXA +# ifdef SMC_USE_PXA_DMA + lp->cfg.flags |= SMC91X_USE_DMA; +# endif + if (lp->cfg.flags & SMC91X_USE_DMA) { + int dma = pxa_request_dma(dev->name, DMA_PRIO_LOW, + smc_pxa_dma_irq, NULL); + if (dma >= 0) + dev->dma = dma; + } +#endif + + retval = register_netdev(dev); + if (retval == 0) { + /* now, print out the card info, in a short format.. */ + printk("%s: %s (rev %d) at %p IRQ %d", + dev->name, version_string, revision_register & 0x0f, + lp->base, dev->irq); + + if (dev->dma != (unsigned char)-1) + printk(" DMA %d", dev->dma); + + printk("%s%s\n", + lp->cfg.flags & SMC91X_NOWAIT ? " [nowait]" : "", + THROTTLE_TX_PKTS ? " [throttle_tx]" : ""); + + if (!is_valid_ether_addr(dev->dev_addr)) { + printk("%s: Invalid ethernet MAC address. Please " + "set using ifconfig\n", dev->name); + } else { + /* Print the Ethernet address */ + printk("%s: Ethernet addr: %pM\n", + dev->name, dev->dev_addr); + } + + if (lp->phy_type == 0) { + PRINTK("%s: No PHY found\n", dev->name); + } else if ((lp->phy_type & 0xfffffff0) == 0x0016f840) { + PRINTK("%s: PHY LAN83C183 (LAN91C111 Internal)\n", dev->name); + } else if ((lp->phy_type & 0xfffffff0) == 0x02821c50) { + PRINTK("%s: PHY LAN83C180\n", dev->name); + } + } + +err_out: +#ifdef CONFIG_ARCH_PXA + if (retval && dev->dma != (unsigned char)-1) + pxa_free_dma(dev->dma); +#endif + return retval; +} + +static int smc_enable_device(struct platform_device *pdev) +{ + struct net_device *ndev = platform_get_drvdata(pdev); + struct smc_local *lp = netdev_priv(ndev); + unsigned long flags; + unsigned char ecor, ecsr; + void __iomem *addr; + struct resource * res; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-attrib"); + if (!res) + return 0; + + /* + * Map the attribute space. This is overkill, but clean. + */ + addr = ioremap(res->start, ATTRIB_SIZE); + if (!addr) + return -ENOMEM; + + /* + * Reset the device. We must disable IRQs around this + * since a reset causes the IRQ line become active. + */ + local_irq_save(flags); + ecor = readb(addr + (ECOR << SMC_IO_SHIFT)) & ~ECOR_RESET; + writeb(ecor | ECOR_RESET, addr + (ECOR << SMC_IO_SHIFT)); + readb(addr + (ECOR << SMC_IO_SHIFT)); + + /* + * Wait 100us for the chip to reset. + */ + udelay(100); + + /* + * The device will ignore all writes to the enable bit while + * reset is asserted, even if the reset bit is cleared in the + * same write. Must clear reset first, then enable the device. + */ + writeb(ecor, addr + (ECOR << SMC_IO_SHIFT)); + writeb(ecor | ECOR_ENABLE, addr + (ECOR << SMC_IO_SHIFT)); + + /* + * Set the appropriate byte/word mode. + */ + ecsr = readb(addr + (ECSR << SMC_IO_SHIFT)) & ~ECSR_IOIS8; + if (!SMC_16BIT(lp)) + ecsr |= ECSR_IOIS8; + writeb(ecsr, addr + (ECSR << SMC_IO_SHIFT)); + local_irq_restore(flags); + + iounmap(addr); + + /* + * Wait for the chip to wake up. We could poll the control + * register in the main register space, but that isn't mapped + * yet. We know this is going to take 750us. + */ + msleep(1); + + return 0; +} + +static int smc_request_attrib(struct platform_device *pdev, + struct net_device *ndev) +{ + struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-attrib"); + struct smc_local *lp __maybe_unused = netdev_priv(ndev); + + if (!res) + return 0; + + if (!request_mem_region(res->start, ATTRIB_SIZE, CARDNAME)) + return -EBUSY; + + return 0; +} + +static void smc_release_attrib(struct platform_device *pdev, + struct net_device *ndev) +{ + struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-attrib"); + struct smc_local *lp __maybe_unused = netdev_priv(ndev); + + if (res) + release_mem_region(res->start, ATTRIB_SIZE); +} + +static inline void smc_request_datacs(struct platform_device *pdev, struct net_device *ndev) +{ + if (SMC_CAN_USE_DATACS) { + struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-data32"); + struct smc_local *lp = netdev_priv(ndev); + + if (!res) + return; + + if(!request_mem_region(res->start, SMC_DATA_EXTENT, CARDNAME)) { + printk(KERN_INFO "%s: failed to request datacs memory region.\n", CARDNAME); + return; + } + + lp->datacs = ioremap(res->start, SMC_DATA_EXTENT); + } +} + +static void smc_release_datacs(struct platform_device *pdev, struct net_device *ndev) +{ + if (SMC_CAN_USE_DATACS) { + struct smc_local *lp = netdev_priv(ndev); + struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-data32"); + + if (lp->datacs) + iounmap(lp->datacs); + + lp->datacs = NULL; + + if (res) + release_mem_region(res->start, SMC_DATA_EXTENT); + } +} + +/* + * smc_init(void) + * Input parameters: + * dev->base_addr == 0, try to find all possible locations + * dev->base_addr > 0x1ff, this is the address to check + * dev->base_addr == <anything else>, return failure code + * + * Output: + * 0 --> there is a device + * anything else, error + */ +static int __devinit smc_drv_probe(struct platform_device *pdev) +{ + struct smc91x_platdata *pd = pdev->dev.platform_data; + struct smc_local *lp; + struct net_device *ndev; + struct resource *res, *ires; + unsigned int __iomem *addr; + unsigned long irq_flags = SMC_IRQ_FLAGS; + int ret; + + ndev = alloc_etherdev(sizeof(struct smc_local)); + if (!ndev) { + printk("%s: could not allocate device.\n", CARDNAME); + ret = -ENOMEM; + goto out; + } + SET_NETDEV_DEV(ndev, &pdev->dev); + + /* get configuration from platform data, only allow use of + * bus width if both SMC_CAN_USE_xxx and SMC91X_USE_xxx are set. + */ + + lp = netdev_priv(ndev); + + if (pd) { + memcpy(&lp->cfg, pd, sizeof(lp->cfg)); + lp->io_shift = SMC91X_IO_SHIFT(lp->cfg.flags); + } else { + lp->cfg.flags |= (SMC_CAN_USE_8BIT) ? SMC91X_USE_8BIT : 0; + lp->cfg.flags |= (SMC_CAN_USE_16BIT) ? SMC91X_USE_16BIT : 0; + lp->cfg.flags |= (SMC_CAN_USE_32BIT) ? SMC91X_USE_32BIT : 0; + lp->cfg.flags |= (nowait) ? SMC91X_NOWAIT : 0; + } + + if (!lp->cfg.leda && !lp->cfg.ledb) { + lp->cfg.leda = RPC_LSA_DEFAULT; + lp->cfg.ledb = RPC_LSB_DEFAULT; + } + + ndev->dma = (unsigned char)-1; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs"); + if (!res) + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENODEV; + goto out_free_netdev; + } + + + if (!request_mem_region(res->start, SMC_IO_EXTENT, CARDNAME)) { + ret = -EBUSY; + goto out_free_netdev; + } + + ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!ires) { + ret = -ENODEV; + goto out_release_io; + } + + ndev->irq = ires->start; + + if (irq_flags == -1 || ires->flags & IRQF_TRIGGER_MASK) + irq_flags = ires->flags & IRQF_TRIGGER_MASK; + + ret = smc_request_attrib(pdev, ndev); + if (ret) + goto out_release_io; +#if defined(CONFIG_SA1100_ASSABET) + NCR_0 |= NCR_ENET_OSC_EN; +#endif + platform_set_drvdata(pdev, ndev); + ret = smc_enable_device(pdev); + if (ret) + goto out_release_attrib; + + addr = ioremap(res->start, SMC_IO_EXTENT); + if (!addr) { + ret = -ENOMEM; + goto out_release_attrib; + } + +#ifdef CONFIG_ARCH_PXA + { + struct smc_local *lp = netdev_priv(ndev); + lp->device = &pdev->dev; + lp->physaddr = res->start; + } +#endif + + ret = smc_probe(ndev, addr, irq_flags); + if (ret != 0) + goto out_iounmap; + + smc_request_datacs(pdev, ndev); + + return 0; + + out_iounmap: + platform_set_drvdata(pdev, NULL); + iounmap(addr); + out_release_attrib: + smc_release_attrib(pdev, ndev); + out_release_io: + release_mem_region(res->start, SMC_IO_EXTENT); + out_free_netdev: + free_netdev(ndev); + out: + printk("%s: not found (%d).\n", CARDNAME, ret); + + return ret; +} + +static int __devexit smc_drv_remove(struct platform_device *pdev) +{ + struct net_device *ndev = platform_get_drvdata(pdev); + struct smc_local *lp = netdev_priv(ndev); + struct resource *res; + + platform_set_drvdata(pdev, NULL); + + unregister_netdev(ndev); + + free_irq(ndev->irq, ndev); + +#ifdef CONFIG_ARCH_PXA + if (ndev->dma != (unsigned char)-1) + pxa_free_dma(ndev->dma); +#endif + iounmap(lp->base); + + smc_release_datacs(pdev,ndev); + smc_release_attrib(pdev,ndev); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs"); + if (!res) + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, SMC_IO_EXTENT); + + free_netdev(ndev); + + return 0; +} + +static int smc_drv_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct net_device *ndev = platform_get_drvdata(pdev); + + if (ndev) { + if (netif_running(ndev)) { + netif_device_detach(ndev); + smc_shutdown(ndev); + smc_phy_powerdown(ndev); + } + } + return 0; +} + +static int smc_drv_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct net_device *ndev = platform_get_drvdata(pdev); + + if (ndev) { + struct smc_local *lp = netdev_priv(ndev); + smc_enable_device(pdev); + if (netif_running(ndev)) { + smc_reset(ndev); + smc_enable(ndev); + if (lp->phy_type != 0) + smc_phy_configure(&lp->phy_configure); + netif_device_attach(ndev); + } + } + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id smc91x_match[] = { + { .compatible = "smsc,lan91c94", }, + { .compatible = "smsc,lan91c111", }, + {}, +}; +MODULE_DEVICE_TABLE(of, smc91x_match); +#else +#define smc91x_match NULL +#endif + +static struct dev_pm_ops smc_drv_pm_ops = { + .suspend = smc_drv_suspend, + .resume = smc_drv_resume, +}; + +static struct platform_driver smc_driver = { + .probe = smc_drv_probe, + .remove = __devexit_p(smc_drv_remove), + .driver = { + .name = CARDNAME, + .owner = THIS_MODULE, + .pm = &smc_drv_pm_ops, + .of_match_table = smc91x_match, + }, +}; + +static int __init smc_init(void) +{ + return platform_driver_register(&smc_driver); +} + +static void __exit smc_cleanup(void) +{ + platform_driver_unregister(&smc_driver); +} + +module_init(smc_init); +module_exit(smc_cleanup); |