diff options
Diffstat (limited to 'drivers/net/ethernet/sfc/ef100_nic.c')
| -rw-r--r-- | drivers/net/ethernet/sfc/ef100_nic.c | 216 |
1 files changed, 216 insertions, 0 deletions
diff --git a/drivers/net/ethernet/sfc/ef100_nic.c b/drivers/net/ethernet/sfc/ef100_nic.c index c2bec2bdbc1f..9b5e4b42fe51 100644 --- a/drivers/net/ethernet/sfc/ef100_nic.c +++ b/drivers/net/ethernet/sfc/ef100_nic.c @@ -515,6 +515,208 @@ static int compare_versions(const char *a, const char *b) return a_patch - b_patch; } +enum ef100_tlv_state_machine { + EF100_TLV_TYPE, + EF100_TLV_TYPE_CONT, + EF100_TLV_LENGTH, + EF100_TLV_VALUE +}; + +struct ef100_tlv_state { + enum ef100_tlv_state_machine state; + u64 value; + u32 value_offset; + u16 type; + u8 len; +}; + +static int ef100_tlv_feed(struct ef100_tlv_state *state, u8 byte) +{ + switch (state->state) { + case EF100_TLV_TYPE: + state->type = byte & 0x7f; + state->state = (byte & 0x80) ? EF100_TLV_TYPE_CONT + : EF100_TLV_LENGTH; + /* Clear ready to read in a new entry */ + state->value = 0; + state->value_offset = 0; + return 0; + case EF100_TLV_TYPE_CONT: + state->type |= byte << 7; + state->state = EF100_TLV_LENGTH; + return 0; + case EF100_TLV_LENGTH: + state->len = byte; + /* We only handle TLVs that fit in a u64 */ + if (state->len > sizeof(state->value)) + return -EOPNOTSUPP; + /* len may be zero, implying a value of zero */ + state->state = state->len ? EF100_TLV_VALUE : EF100_TLV_TYPE; + return 0; + case EF100_TLV_VALUE: + state->value |= ((u64)byte) << (state->value_offset * 8); + state->value_offset++; + if (state->value_offset >= state->len) + state->state = EF100_TLV_TYPE; + return 0; + default: /* state machine error, can't happen */ + WARN_ON_ONCE(1); + return -EIO; + } +} + +static int ef100_process_design_param(struct efx_nic *efx, + const struct ef100_tlv_state *reader) +{ + struct ef100_nic_data *nic_data = efx->nic_data; + + switch (reader->type) { + case ESE_EF100_DP_GZ_PAD: /* padding, skip it */ + return 0; + case ESE_EF100_DP_GZ_PARTIAL_TSTAMP_SUB_NANO_BITS: + /* Driver doesn't support timestamping yet, so we don't care */ + return 0; + case ESE_EF100_DP_GZ_EVQ_UNSOL_CREDIT_SEQ_BITS: + /* Driver doesn't support unsolicited-event credits yet, so + * we don't care + */ + return 0; + case ESE_EF100_DP_GZ_NMMU_GROUP_SIZE: + /* Driver doesn't manage the NMMU (so we don't care) */ + return 0; + case ESE_EF100_DP_GZ_RX_L4_CSUM_PROTOCOLS: + /* Driver uses CHECKSUM_COMPLETE, so we don't care about + * protocol checksum validation + */ + return 0; + case ESE_EF100_DP_GZ_TSO_MAX_HDR_LEN: + nic_data->tso_max_hdr_len = min_t(u64, reader->value, 0xffff); + return 0; + case ESE_EF100_DP_GZ_TSO_MAX_HDR_NUM_SEGS: + /* We always put HDR_NUM_SEGS=1 in our TSO descriptors */ + if (!reader->value) { + netif_err(efx, probe, efx->net_dev, + "TSO_MAX_HDR_NUM_SEGS < 1\n"); + return -EOPNOTSUPP; + } + return 0; + case ESE_EF100_DP_GZ_RXQ_SIZE_GRANULARITY: + case ESE_EF100_DP_GZ_TXQ_SIZE_GRANULARITY: + /* Our TXQ and RXQ sizes are always power-of-two and thus divisible by + * EFX_MIN_DMAQ_SIZE, so we just need to check that + * EFX_MIN_DMAQ_SIZE is divisible by GRANULARITY. + * This is very unlikely to fail. + */ + if (EFX_MIN_DMAQ_SIZE % reader->value) { + netif_err(efx, probe, efx->net_dev, + "%s size granularity is %llu, can't guarantee safety\n", + reader->type == ESE_EF100_DP_GZ_RXQ_SIZE_GRANULARITY ? "RXQ" : "TXQ", + reader->value); + return -EOPNOTSUPP; + } + return 0; + case ESE_EF100_DP_GZ_TSO_MAX_PAYLOAD_LEN: + nic_data->tso_max_payload_len = min_t(u64, reader->value, GSO_MAX_SIZE); + efx->net_dev->gso_max_size = nic_data->tso_max_payload_len; + return 0; + case ESE_EF100_DP_GZ_TSO_MAX_PAYLOAD_NUM_SEGS: + nic_data->tso_max_payload_num_segs = min_t(u64, reader->value, 0xffff); + efx->net_dev->gso_max_segs = nic_data->tso_max_payload_num_segs; + return 0; + case ESE_EF100_DP_GZ_TSO_MAX_NUM_FRAMES: + nic_data->tso_max_frames = min_t(u64, reader->value, 0xffff); + return 0; + case ESE_EF100_DP_GZ_COMPAT: + if (reader->value) { + netif_err(efx, probe, efx->net_dev, + "DP_COMPAT has unknown bits %#llx, driver not compatible with this hw\n", + reader->value); + return -EOPNOTSUPP; + } + return 0; + case ESE_EF100_DP_GZ_MEM2MEM_MAX_LEN: + /* Driver doesn't use mem2mem transfers */ + return 0; + case ESE_EF100_DP_GZ_EVQ_TIMER_TICK_NANOS: + /* Driver doesn't currently use EVQ_TIMER */ + return 0; + case ESE_EF100_DP_GZ_NMMU_PAGE_SIZES: + /* Driver doesn't manage the NMMU (so we don't care) */ + return 0; + case ESE_EF100_DP_GZ_VI_STRIDES: + /* We never try to set the VI stride, and we don't rely on + * being able to find VIs past VI 0 until after we've learned + * the current stride from MC_CMD_GET_CAPABILITIES. + * So the value of this shouldn't matter. + */ + if (reader->value != ESE_EF100_DP_GZ_VI_STRIDES_DEFAULT) + netif_dbg(efx, probe, efx->net_dev, + "NIC has other than default VI_STRIDES (mask " + "%#llx), early probing might use wrong one\n", + reader->value); + return 0; + case ESE_EF100_DP_GZ_RX_MAX_RUNT: + /* Driver doesn't look at L2_STATUS:LEN_ERR bit, so we don't + * care whether it indicates runt or overlength for any given + * packet, so we don't care about this parameter. + */ + return 0; + default: + /* Host interface says "Drivers should ignore design parameters + * that they do not recognise." + */ + netif_dbg(efx, probe, efx->net_dev, + "Ignoring unrecognised design parameter %u\n", + reader->type); + return 0; + } +} + +static int ef100_check_design_params(struct efx_nic *efx) +{ + struct ef100_tlv_state reader = {}; + u32 total_len, offset = 0; + efx_dword_t reg; + int rc = 0, i; + u32 data; + + efx_readd(efx, ®, ER_GZ_PARAMS_TLV_LEN); + total_len = EFX_DWORD_FIELD(reg, EFX_DWORD_0); + netif_dbg(efx, probe, efx->net_dev, "%u bytes of design parameters\n", + total_len); + while (offset < total_len) { + efx_readd(efx, ®, ER_GZ_PARAMS_TLV + offset); + data = EFX_DWORD_FIELD(reg, EFX_DWORD_0); + for (i = 0; i < sizeof(data); i++) { + rc = ef100_tlv_feed(&reader, data); + /* Got a complete value? */ + if (!rc && reader.state == EF100_TLV_TYPE) + rc = ef100_process_design_param(efx, &reader); + if (rc) + goto out; + data >>= 8; + offset++; + } + } + /* Check we didn't end halfway through a TLV entry, which could either + * mean that the TLV stream is truncated or just that it's corrupted + * and our state machine is out of sync. + */ + if (reader.state != EF100_TLV_TYPE) { + if (reader.state == EF100_TLV_TYPE_CONT) + netif_err(efx, probe, efx->net_dev, + "truncated design parameter (incomplete type %u)\n", + reader.type); + else + netif_err(efx, probe, efx->net_dev, + "truncated design parameter %u\n", + reader.type); + rc = -EIO; + } +out: + return rc; +} + /* NIC probe and remove */ static int ef100_probe_main(struct efx_nic *efx) @@ -536,6 +738,20 @@ static int ef100_probe_main(struct efx_nic *efx) net_dev->features |= efx->type->offload_features; net_dev->hw_features |= efx->type->offload_features; + /* Populate design-parameter defaults */ + nic_data->tso_max_hdr_len = ESE_EF100_DP_GZ_TSO_MAX_HDR_LEN_DEFAULT; + nic_data->tso_max_frames = ESE_EF100_DP_GZ_TSO_MAX_NUM_FRAMES_DEFAULT; + nic_data->tso_max_payload_num_segs = ESE_EF100_DP_GZ_TSO_MAX_PAYLOAD_NUM_SEGS_DEFAULT; + nic_data->tso_max_payload_len = ESE_EF100_DP_GZ_TSO_MAX_PAYLOAD_LEN_DEFAULT; + net_dev->gso_max_segs = ESE_EF100_DP_GZ_TSO_MAX_HDR_NUM_SEGS_DEFAULT; + /* Read design parameters */ + rc = ef100_check_design_params(efx); + if (rc) { + netif_err(efx, probe, efx->net_dev, + "Unsupported design parameters\n"); + goto fail; + } + /* we assume later that we can copy from this buffer in dwords */ BUILD_BUG_ON(MCDI_CTL_SDU_LEN_MAX_V2 % 4); |