diff options
Diffstat (limited to 'drivers/net/ethernet/8390/smc-mca.c')
| -rw-r--r-- | drivers/net/ethernet/8390/smc-mca.c | 575 |
1 files changed, 0 insertions, 575 deletions
diff --git a/drivers/net/ethernet/8390/smc-mca.c b/drivers/net/ethernet/8390/smc-mca.c deleted file mode 100644 index 7a68590f2804..000000000000 --- a/drivers/net/ethernet/8390/smc-mca.c +++ /dev/null @@ -1,575 +0,0 @@ -/* smc-mca.c: A SMC Ultra ethernet driver for linux. */ -/* - Most of this driver, except for ultramca_probe is nearly - verbatim from smc-ultra.c by Donald Becker. The rest is - written and copyright 1996 by David Weis, weisd3458@uni.edu - - This is a driver for the SMC Ultra and SMC EtherEZ ethercards. - - This driver uses the cards in the 8390-compatible, shared memory mode. - Most of the run-time complexity is handled by the generic code in - 8390.c. - - This driver enables the shared memory only when doing the actual data - transfers to avoid a bug in early version of the card that corrupted - data transferred by a AHA1542. - - This driver does not support the programmed-I/O data transfer mode of - the EtherEZ. That support (if available) is smc-ez.c. Nor does it - use the non-8390-compatible "Altego" mode. (No support currently planned.) - - Changelog: - - Paul Gortmaker : multiple card support for module users. - David Weis : Micro Channel-ized it. - Tom Sightler : Added support for IBM PS/2 Ethernet Adapter/A - Christopher Turcksin : Changed MCA-probe so that multiple adapters are - found correctly (Jul 16, 1997) - Chris Beauregard : Tried to merge the two changes above (Dec 15, 1997) - Tom Sightler : Fixed minor detection bug caused by above merge - Tom Sightler : Added support for three more Western Digital - MCA-adapters - Tom Sightler : Added support for 2.2.x mca_find_unused_adapter - Hartmut Schmidt : - Modified parameter detection to handle each - card differently depending on a switch-list - - 'card_ver' removed from the adapter list - - Some minor bug fixes -*/ - -#include <linux/mca.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> - -#include <asm/io.h> - -#include "8390.h" - -#define DRV_NAME "smc-mca" - -static int ultramca_open(struct net_device *dev); -static void ultramca_reset_8390(struct net_device *dev); -static void ultramca_get_8390_hdr(struct net_device *dev, - struct e8390_pkt_hdr *hdr, - int ring_page); -static void ultramca_block_input(struct net_device *dev, int count, - struct sk_buff *skb, - int ring_offset); -static void ultramca_block_output(struct net_device *dev, int count, - const unsigned char *buf, - const int start_page); -static int ultramca_close_card(struct net_device *dev); - -#define START_PG 0x00 /* First page of TX buffer */ - -#define ULTRA_CMDREG 0 /* Offset to ASIC command register. */ -#define ULTRA_RESET 0x80 /* Board reset, in ULTRA_CMDREG. */ -#define ULTRA_MEMENB 0x40 /* Enable the shared memory. */ -#define ULTRA_NIC_OFFSET 16 /* NIC register offset from the base_addr. */ -#define ULTRA_IO_EXTENT 32 -#define EN0_ERWCNT 0x08 /* Early receive warning count. */ - -#define _61c8_SMC_Ethercard_PLUS_Elite_A_BNC_AUI_WD8013EP_A 0 -#define _61c9_SMC_Ethercard_PLUS_Elite_A_UTP_AUI_WD8013EP_A 1 -#define _6fc0_WD_Ethercard_PLUS_A_WD8003E_A_OR_WD8003ET_A 2 -#define _6fc1_WD_Starcard_PLUS_A_WD8003ST_A 3 -#define _6fc2_WD_Ethercard_PLUS_10T_A_WD8003W_A 4 -#define _efd4_IBM_PS2_Adapter_A_for_Ethernet_UTP_AUI_WD8013WP_A 5 -#define _efd5_IBM_PS2_Adapter_A_for_Ethernet_BNC_AUI_WD8013WP_A 6 -#define _efe5_IBM_PS2_Adapter_A_for_Ethernet 7 - -struct smc_mca_adapters_t { - unsigned int id; - char *name; -}; - -#define MAX_ULTRAMCA_CARDS 4 /* Max number of Ultra cards per module */ - -static int ultra_io[MAX_ULTRAMCA_CARDS]; -static int ultra_irq[MAX_ULTRAMCA_CARDS]; -MODULE_LICENSE("GPL"); - -module_param_array(ultra_io, int, NULL, 0); -module_param_array(ultra_irq, int, NULL, 0); -MODULE_PARM_DESC(ultra_io, "SMC Ultra/EtherEZ MCA I/O base address(es)"); -MODULE_PARM_DESC(ultra_irq, "SMC Ultra/EtherEZ MCA IRQ number(s)"); - -static const struct { - unsigned int base_addr; -} addr_table[] = { - { 0x0800 }, - { 0x1800 }, - { 0x2800 }, - { 0x3800 }, - { 0x4800 }, - { 0x5800 }, - { 0x6800 }, - { 0x7800 }, - { 0x8800 }, - { 0x9800 }, - { 0xa800 }, - { 0xb800 }, - { 0xc800 }, - { 0xd800 }, - { 0xe800 }, - { 0xf800 } -}; - -#define MEM_MASK 64 - -static const struct { - unsigned char mem_index; - unsigned long mem_start; - unsigned char num_pages; -} mem_table[] = { - { 16, 0x0c0000, 40 }, - { 18, 0x0c4000, 40 }, - { 20, 0x0c8000, 40 }, - { 22, 0x0cc000, 40 }, - { 24, 0x0d0000, 40 }, - { 26, 0x0d4000, 40 }, - { 28, 0x0d8000, 40 }, - { 30, 0x0dc000, 40 }, - {144, 0xfc0000, 40 }, - {148, 0xfc8000, 40 }, - {154, 0xfd0000, 40 }, - {156, 0xfd8000, 40 }, - { 0, 0x0c0000, 20 }, - { 1, 0x0c2000, 20 }, - { 2, 0x0c4000, 20 }, - { 3, 0x0c6000, 20 } -}; - -#define IRQ_MASK 243 -static const struct { - unsigned char new_irq; - unsigned char old_irq; -} irq_table[] = { - { 3, 3 }, - { 4, 4 }, - { 10, 10 }, - { 14, 15 } -}; - -static short smc_mca_adapter_ids[] __initdata = { - 0x61c8, - 0x61c9, - 0x6fc0, - 0x6fc1, - 0x6fc2, - 0xefd4, - 0xefd5, - 0xefe5, - 0x0000 -}; - -static char *smc_mca_adapter_names[] __initdata = { - "SMC Ethercard PLUS Elite/A BNC/AUI (WD8013EP/A)", - "SMC Ethercard PLUS Elite/A UTP/AUI (WD8013WP/A)", - "WD Ethercard PLUS/A (WD8003E/A or WD8003ET/A)", - "WD Starcard PLUS/A (WD8003ST/A)", - "WD Ethercard PLUS 10T/A (WD8003W/A)", - "IBM PS/2 Adapter/A for Ethernet UTP/AUI (WD8013WP/A)", - "IBM PS/2 Adapter/A for Ethernet BNC/AUI (WD8013EP/A)", - "IBM PS/2 Adapter/A for Ethernet", - NULL -}; - -static int ultra_found = 0; - - -static const struct net_device_ops ultramca_netdev_ops = { - .ndo_open = ultramca_open, - .ndo_stop = ultramca_close_card, - - .ndo_start_xmit = ei_start_xmit, - .ndo_tx_timeout = ei_tx_timeout, - .ndo_get_stats = ei_get_stats, - .ndo_set_rx_mode = ei_set_multicast_list, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, - .ndo_change_mtu = eth_change_mtu, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = ei_poll, -#endif -}; - -static int __init ultramca_probe(struct device *gen_dev) -{ - unsigned short ioaddr; - struct net_device *dev; - unsigned char reg4, num_pages; - struct mca_device *mca_dev = to_mca_device(gen_dev); - char slot = mca_dev->slot; - unsigned char pos2 = 0xff, pos3 = 0xff, pos4 = 0xff, pos5 = 0xff; - int i, rc; - int adapter = mca_dev->index; - int tbase = 0; - int tirq = 0; - int base_addr = ultra_io[ultra_found]; - int irq = ultra_irq[ultra_found]; - - if (base_addr || irq) { - printk(KERN_INFO "Probing for SMC MCA adapter"); - if (base_addr) { - printk(KERN_INFO " at I/O address 0x%04x%c", - base_addr, irq ? ' ' : '\n'); - } - if (irq) { - printk(KERN_INFO "using irq %d\n", irq); - } - } - - tirq = 0; - tbase = 0; - - /* If we're trying to match a specificied irq or io address, - * we'll reject the adapter found unless it's the one we're - * looking for */ - - pos2 = mca_device_read_stored_pos(mca_dev, 2); /* io_addr */ - pos3 = mca_device_read_stored_pos(mca_dev, 3); /* shared mem */ - pos4 = mca_device_read_stored_pos(mca_dev, 4); /* ROM bios addr range */ - pos5 = mca_device_read_stored_pos(mca_dev, 5); /* irq, media and RIPL */ - - /* Test the following conditions: - * - If an irq parameter is supplied, compare it - * with the irq of the adapter we found - * - If a base_addr paramater is given, compare it - * with the base_addr of the adapter we found - * - Check that the irq and the base_addr of the - * adapter we found is not already in use by - * this driver - */ - - switch (mca_dev->index) { - case _61c8_SMC_Ethercard_PLUS_Elite_A_BNC_AUI_WD8013EP_A: - case _61c9_SMC_Ethercard_PLUS_Elite_A_UTP_AUI_WD8013EP_A: - case _efd4_IBM_PS2_Adapter_A_for_Ethernet_UTP_AUI_WD8013WP_A: - case _efd5_IBM_PS2_Adapter_A_for_Ethernet_BNC_AUI_WD8013WP_A: - { - tbase = addr_table[(pos2 & 0xf0) >> 4].base_addr; - tirq = irq_table[(pos5 & 0xc) >> 2].new_irq; - break; - } - case _6fc0_WD_Ethercard_PLUS_A_WD8003E_A_OR_WD8003ET_A: - case _6fc1_WD_Starcard_PLUS_A_WD8003ST_A: - case _6fc2_WD_Ethercard_PLUS_10T_A_WD8003W_A: - case _efe5_IBM_PS2_Adapter_A_for_Ethernet: - { - tbase = ((pos2 & 0x0fe) * 0x10); - tirq = irq_table[(pos5 & 3)].old_irq; - break; - } - } - - if(!tirq || !tbase || - (irq && irq != tirq) || - (base_addr && tbase != base_addr)) - /* FIXME: we're trying to force the ordering of the - * devices here, there should be a way of getting this - * to happen */ - return -ENXIO; - - /* Adapter found. */ - dev = alloc_ei_netdev(); - if(!dev) - return -ENODEV; - - SET_NETDEV_DEV(dev, gen_dev); - mca_device_set_name(mca_dev, smc_mca_adapter_names[adapter]); - mca_device_set_claim(mca_dev, 1); - - printk(KERN_INFO "smc_mca: %s found in slot %d\n", - smc_mca_adapter_names[adapter], slot + 1); - - ultra_found++; - - dev->base_addr = ioaddr = mca_device_transform_ioport(mca_dev, tbase); - dev->irq = mca_device_transform_irq(mca_dev, tirq); - dev->mem_start = 0; - num_pages = 40; - - switch (adapter) { /* card-# in const array above [hs] */ - case _61c8_SMC_Ethercard_PLUS_Elite_A_BNC_AUI_WD8013EP_A: - case _61c9_SMC_Ethercard_PLUS_Elite_A_UTP_AUI_WD8013EP_A: - { - for (i = 0; i < 16; i++) { /* taking 16 counts - * up to 15 [hs] */ - if (mem_table[i].mem_index == (pos3 & ~MEM_MASK)) { - dev->mem_start = (unsigned long) - mca_device_transform_memory(mca_dev, (void *)mem_table[i].mem_start); - num_pages = mem_table[i].num_pages; - } - } - break; - } - case _6fc0_WD_Ethercard_PLUS_A_WD8003E_A_OR_WD8003ET_A: - case _6fc1_WD_Starcard_PLUS_A_WD8003ST_A: - case _6fc2_WD_Ethercard_PLUS_10T_A_WD8003W_A: - case _efe5_IBM_PS2_Adapter_A_for_Ethernet: - { - dev->mem_start = (unsigned long) - mca_device_transform_memory(mca_dev, (void *)((pos3 & 0xfc) * 0x1000)); - num_pages = 0x40; - break; - } - case _efd4_IBM_PS2_Adapter_A_for_Ethernet_UTP_AUI_WD8013WP_A: - case _efd5_IBM_PS2_Adapter_A_for_Ethernet_BNC_AUI_WD8013WP_A: - { - /* courtesy of gamera@quartz.ocn.ne.jp, pos3 indicates - * the index of the 0x2000 step. - * beware different number of pages [hs] - */ - dev->mem_start = (unsigned long) - mca_device_transform_memory(mca_dev, (void *)(0xc0000 + (0x2000 * (pos3 & 0xf)))); - num_pages = 0x20 + (2 * (pos3 & 0x10)); - break; - } - } - - /* sanity check, shouldn't happen */ - if (dev->mem_start == 0) { - rc = -ENODEV; - goto err_unclaim; - } - - if (!request_region(ioaddr, ULTRA_IO_EXTENT, DRV_NAME)) { - rc = -ENODEV; - goto err_unclaim; - } - - reg4 = inb(ioaddr + 4) & 0x7f; - outb(reg4, ioaddr + 4); - - for (i = 0; i < 6; i++) - dev->dev_addr[i] = inb(ioaddr + 8 + i); - - printk(KERN_INFO "smc_mca[%d]: Parameters: %#3x, %pM", - slot + 1, ioaddr, dev->dev_addr); - - /* Switch from the station address to the alternate register set - * and read the useful registers there. - */ - - outb(0x80 | reg4, ioaddr + 4); - - /* Enable FINE16 mode to avoid BIOS ROM width mismatches @ reboot. - */ - - outb(0x80 | inb(ioaddr + 0x0c), ioaddr + 0x0c); - - /* Switch back to the station address register set so that - * the MS-DOS driver can find the card after a warm boot. - */ - - outb(reg4, ioaddr + 4); - - dev_set_drvdata(gen_dev, dev); - - /* The 8390 isn't at the base address, so fake the offset - */ - - dev->base_addr = ioaddr + ULTRA_NIC_OFFSET; - - ei_status.name = "SMC Ultra MCA"; - ei_status.word16 = 1; - ei_status.tx_start_page = START_PG; - ei_status.rx_start_page = START_PG + TX_PAGES; - ei_status.stop_page = num_pages; - - ei_status.mem = ioremap(dev->mem_start, (ei_status.stop_page - START_PG) * 256); - if (!ei_status.mem) { - rc = -ENOMEM; - goto err_release_region; - } - - dev->mem_end = dev->mem_start + (ei_status.stop_page - START_PG) * 256; - - printk(", IRQ %d memory %#lx-%#lx.\n", - dev->irq, dev->mem_start, dev->mem_end - 1); - - ei_status.reset_8390 = &ultramca_reset_8390; - ei_status.block_input = &ultramca_block_input; - ei_status.block_output = &ultramca_block_output; - ei_status.get_8390_hdr = &ultramca_get_8390_hdr; - - ei_status.priv = slot; - - dev->netdev_ops = &ultramca_netdev_ops; - - NS8390_init(dev, 0); - - rc = register_netdev(dev); - if (rc) - goto err_unmap; - - return 0; - -err_unmap: - iounmap(ei_status.mem); -err_release_region: - release_region(ioaddr, ULTRA_IO_EXTENT); -err_unclaim: - mca_device_set_claim(mca_dev, 0); - free_netdev(dev); - return rc; -} - -static int ultramca_open(struct net_device *dev) -{ - int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC addr */ - int retval; - - if ((retval = request_irq(dev->irq, ei_interrupt, 0, dev->name, dev))) - return retval; - - outb(ULTRA_MEMENB, ioaddr); /* Enable memory */ - outb(0x80, ioaddr + 5); /* ??? */ - outb(0x01, ioaddr + 6); /* Enable interrupts and memory. */ - outb(0x04, ioaddr + 5); /* ??? */ - - /* Set the early receive warning level in window 0 high enough not - * to receive ERW interrupts. - */ - - /* outb_p(E8390_NODMA + E8390_PAGE0, dev->base_addr); - * outb(0xff, dev->base_addr + EN0_ERWCNT); - */ - - ei_open(dev); - return 0; -} - -static void ultramca_reset_8390(struct net_device *dev) -{ - int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC addr */ - - outb(ULTRA_RESET, ioaddr); - if (ei_debug > 1) - printk("resetting Ultra, t=%ld...", jiffies); - ei_status.txing = 0; - - outb(0x80, ioaddr + 5); /* ??? */ - outb(0x01, ioaddr + 6); /* Enable interrupts and memory. */ - - if (ei_debug > 1) - printk("reset done\n"); -} - -/* Grab the 8390 specific header. Similar to the block_input routine, but - * we don't need to be concerned with ring wrap as the header will be at - * the start of a page, so we optimize accordingly. - */ - -static void ultramca_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) -{ - void __iomem *hdr_start = ei_status.mem + ((ring_page - START_PG) << 8); - -#ifdef notdef - /* Officially this is what we are doing, but the readl() is faster */ - memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr)); -#else - ((unsigned int*)hdr)[0] = readl(hdr_start); -#endif -} - -/* Block input and output are easy on shared memory ethercards, the only - * complication is when the ring buffer wraps. - */ - -static void ultramca_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) -{ - void __iomem *xfer_start = ei_status.mem + ring_offset - START_PG * 256; - - if (ring_offset + count > ei_status.stop_page * 256) { - /* We must wrap the input move. */ - int semi_count = ei_status.stop_page * 256 - ring_offset; - memcpy_fromio(skb->data, xfer_start, semi_count); - count -= semi_count; - memcpy_fromio(skb->data + semi_count, ei_status.mem + TX_PAGES * 256, count); - } else { - memcpy_fromio(skb->data, xfer_start, count); - } - -} - -static void ultramca_block_output(struct net_device *dev, int count, const unsigned char *buf, - int start_page) -{ - void __iomem *shmem = ei_status.mem + ((start_page - START_PG) << 8); - - memcpy_toio(shmem, buf, count); -} - -static int ultramca_close_card(struct net_device *dev) -{ - int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC addr */ - - netif_stop_queue(dev); - - if (ei_debug > 1) - printk("%s: Shutting down ethercard.\n", dev->name); - - outb(0x00, ioaddr + 6); /* Disable interrupts. */ - free_irq(dev->irq, dev); - - NS8390_init(dev, 0); - /* We should someday disable shared memory and change to 8-bit mode - * "just in case"... - */ - - return 0; -} - -static int ultramca_remove(struct device *gen_dev) -{ - struct mca_device *mca_dev = to_mca_device(gen_dev); - struct net_device *dev = dev_get_drvdata(gen_dev); - - if (dev) { - /* NB: ultra_close_card() does free_irq */ - int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; - - unregister_netdev(dev); - mca_device_set_claim(mca_dev, 0); - release_region(ioaddr, ULTRA_IO_EXTENT); - iounmap(ei_status.mem); - free_netdev(dev); - } - return 0; -} - - -static struct mca_driver ultra_driver = { - .id_table = smc_mca_adapter_ids, - .driver = { - .name = "smc-mca", - .bus = &mca_bus_type, - .probe = ultramca_probe, - .remove = ultramca_remove, - } -}; - -static int __init ultramca_init_module(void) -{ - if(!MCA_bus) - return -ENXIO; - - mca_register_driver(&ultra_driver); - - return ultra_found ? 0 : -ENXIO; -} - -static void __exit ultramca_cleanup_module(void) -{ - mca_unregister_driver(&ultra_driver); -} -module_init(ultramca_init_module); -module_exit(ultramca_cleanup_module); - |