summaryrefslogtreecommitdiff
path: root/drivers/net/e1000e/phy.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/e1000e/phy.c')
-rw-r--r--drivers/net/e1000e/phy.c40
1 files changed, 17 insertions, 23 deletions
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 1781efeb55e3..a640f1c369ae 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -637,12 +637,11 @@ s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data)
**/
s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
{
- struct e1000_phy_info *phy = &hw->phy;
s32 ret_val;
u16 phy_data;
/* Enable CRS on TX. This must be set for half-duplex operation. */
- ret_val = phy->ops.read_reg(hw, I82577_CFG_REG, &phy_data);
+ ret_val = e1e_rphy(hw, I82577_CFG_REG, &phy_data);
if (ret_val)
goto out;
@@ -651,7 +650,7 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
/* Enable downshift */
phy_data |= I82577_CFG_ENABLE_DOWNSHIFT;
- ret_val = phy->ops.write_reg(hw, I82577_CFG_REG, phy_data);
+ ret_val = e1e_wphy(hw, I82577_CFG_REG, phy_data);
out:
return ret_val;
@@ -774,16 +773,14 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
}
if (phy->type == e1000_phy_82578) {
- ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
- &phy_data);
+ ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
if (ret_val)
return ret_val;
/* 82578 PHY - set the downshift count to 1x. */
phy_data |= I82578_EPSCR_DOWNSHIFT_ENABLE;
phy_data &= ~I82578_EPSCR_DOWNSHIFT_COUNTER_MASK;
- ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
- phy_data);
+ ret_val = e1e_wphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
if (ret_val)
return ret_val;
}
@@ -1319,9 +1316,8 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
* We didn't get link.
* Reset the DSP and cross our fingers.
*/
- ret_val = e1e_wphy(hw,
- M88E1000_PHY_PAGE_SELECT,
- 0x001d);
+ ret_val = e1e_wphy(hw, M88E1000_PHY_PAGE_SELECT,
+ 0x001d);
if (ret_val)
return ret_val;
ret_val = e1000e_phy_reset_dsp(hw);
@@ -3071,12 +3067,12 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
goto out;
/* Do not apply workaround if in PHY loopback bit 14 set */
- hw->phy.ops.read_reg(hw, PHY_CONTROL, &data);
+ e1e_rphy(hw, PHY_CONTROL, &data);
if (data & PHY_CONTROL_LB)
goto out;
/* check if link is up and at 1Gbps */
- ret_val = hw->phy.ops.read_reg(hw, BM_CS_STATUS, &data);
+ ret_val = e1e_rphy(hw, BM_CS_STATUS, &data);
if (ret_val)
goto out;
@@ -3092,14 +3088,12 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
mdelay(200);
/* flush the packets in the fifo buffer */
- ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL,
- HV_MUX_DATA_CTRL_GEN_TO_MAC |
- HV_MUX_DATA_CTRL_FORCE_SPEED);
+ ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC |
+ HV_MUX_DATA_CTRL_FORCE_SPEED);
if (ret_val)
goto out;
- ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL,
- HV_MUX_DATA_CTRL_GEN_TO_MAC);
+ ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC);
out:
return ret_val;
@@ -3119,7 +3113,7 @@ s32 e1000_check_polarity_82577(struct e1000_hw *hw)
s32 ret_val;
u16 data;
- ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data);
+ ret_val = e1e_rphy(hw, I82577_PHY_STATUS_2, &data);
if (!ret_val)
phy->cable_polarity = (data & I82577_PHY_STATUS2_REV_POLARITY)
@@ -3142,13 +3136,13 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
u16 phy_data;
bool link;
- ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
+ ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
if (ret_val)
goto out;
e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
- ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
+ ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data);
if (ret_val)
goto out;
@@ -3212,7 +3206,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
if (ret_val)
goto out;
- ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data);
+ ret_val = e1e_rphy(hw, I82577_PHY_STATUS_2, &data);
if (ret_val)
goto out;
@@ -3224,7 +3218,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
if (ret_val)
goto out;
- ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data);
+ ret_val = e1e_rphy(hw, PHY_1000T_STATUS, &data);
if (ret_val)
goto out;
@@ -3258,7 +3252,7 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
s32 ret_val;
u16 phy_data, length;
- ret_val = phy->ops.read_reg(hw, I82577_PHY_DIAG_STATUS, &phy_data);
+ ret_val = e1e_rphy(hw, I82577_PHY_DIAG_STATUS, &phy_data);
if (ret_val)
goto out;