diff options
Diffstat (limited to 'drivers/net/dsa/microchip/ksz8795.c')
| -rw-r--r-- | drivers/net/dsa/microchip/ksz8795.c | 1310 |
1 files changed, 1310 insertions, 0 deletions
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c new file mode 100644 index 000000000000..a23d3ffdf0c4 --- /dev/null +++ b/drivers/net/dsa/microchip/ksz8795.c @@ -0,0 +1,1310 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Microchip KSZ8795 switch driver + * + * Copyright (C) 2017 Microchip Technology Inc. + * Tristram Ha <Tristram.Ha@microchip.com> + */ + +#include <linux/delay.h> +#include <linux/export.h> +#include <linux/gpio.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_data/microchip-ksz.h> +#include <linux/phy.h> +#include <linux/etherdevice.h> +#include <linux/if_bridge.h> +#include <net/dsa.h> +#include <net/switchdev.h> + +#include "ksz_common.h" +#include "ksz8795_reg.h" + +static const struct { + char string[ETH_GSTRING_LEN]; +} mib_names[TOTAL_SWITCH_COUNTER_NUM] = { + { "rx_hi" }, + { "rx_undersize" }, + { "rx_fragments" }, + { "rx_oversize" }, + { "rx_jabbers" }, + { "rx_symbol_err" }, + { "rx_crc_err" }, + { "rx_align_err" }, + { "rx_mac_ctrl" }, + { "rx_pause" }, + { "rx_bcast" }, + { "rx_mcast" }, + { "rx_ucast" }, + { "rx_64_or_less" }, + { "rx_65_127" }, + { "rx_128_255" }, + { "rx_256_511" }, + { "rx_512_1023" }, + { "rx_1024_1522" }, + { "rx_1523_2000" }, + { "rx_2001" }, + { "tx_hi" }, + { "tx_late_col" }, + { "tx_pause" }, + { "tx_bcast" }, + { "tx_mcast" }, + { "tx_ucast" }, + { "tx_deferred" }, + { "tx_total_col" }, + { "tx_exc_col" }, + { "tx_single_col" }, + { "tx_mult_col" }, + { "rx_total" }, + { "tx_total" }, + { "rx_discards" }, + { "tx_discards" }, +}; + +static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set) +{ + regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0); +} + +static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits, + bool set) +{ + regmap_update_bits(dev->regmap[0], PORT_CTRL_ADDR(port, offset), + bits, set ? bits : 0); +} + +static int ksz8795_reset_switch(struct ksz_device *dev) +{ + /* reset switch */ + ksz_write8(dev, REG_POWER_MANAGEMENT_1, + SW_SOFTWARE_POWER_DOWN << SW_POWER_MANAGEMENT_MODE_S); + ksz_write8(dev, REG_POWER_MANAGEMENT_1, 0); + + return 0; +} + +static void ksz8795_set_prio_queue(struct ksz_device *dev, int port, int queue) +{ + u8 hi, lo; + + /* Number of queues can only be 1, 2, or 4. */ + switch (queue) { + case 4: + case 3: + queue = PORT_QUEUE_SPLIT_4; + break; + case 2: + queue = PORT_QUEUE_SPLIT_2; + break; + default: + queue = PORT_QUEUE_SPLIT_1; + } + ksz_pread8(dev, port, REG_PORT_CTRL_0, &lo); + ksz_pread8(dev, port, P_DROP_TAG_CTRL, &hi); + lo &= ~PORT_QUEUE_SPLIT_L; + if (queue & PORT_QUEUE_SPLIT_2) + lo |= PORT_QUEUE_SPLIT_L; + hi &= ~PORT_QUEUE_SPLIT_H; + if (queue & PORT_QUEUE_SPLIT_4) + hi |= PORT_QUEUE_SPLIT_H; + ksz_pwrite8(dev, port, REG_PORT_CTRL_0, lo); + ksz_pwrite8(dev, port, P_DROP_TAG_CTRL, hi); + + /* Default is port based for egress rate limit. */ + if (queue != PORT_QUEUE_SPLIT_1) + ksz_cfg(dev, REG_SW_CTRL_19, SW_OUT_RATE_LIMIT_QUEUE_BASED, + true); +} + +static void ksz8795_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, + u64 *cnt) +{ + u16 ctrl_addr; + u32 data; + u8 check; + int loop; + + ctrl_addr = addr + SWITCH_COUNTER_NUM * port; + ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ); + + mutex_lock(&dev->alu_mutex); + ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr); + + /* It is almost guaranteed to always read the valid bit because of + * slow SPI speed. + */ + for (loop = 2; loop > 0; loop--) { + ksz_read8(dev, REG_IND_MIB_CHECK, &check); + + if (check & MIB_COUNTER_VALID) { + ksz_read32(dev, REG_IND_DATA_LO, &data); + if (check & MIB_COUNTER_OVERFLOW) + *cnt += MIB_COUNTER_VALUE + 1; + *cnt += data & MIB_COUNTER_VALUE; + break; + } + } + mutex_unlock(&dev->alu_mutex); +} + +static void ksz8795_r_mib_pkt(struct ksz_device *dev, int port, u16 addr, + u64 *dropped, u64 *cnt) +{ + u16 ctrl_addr; + u32 data; + u8 check; + int loop; + + addr -= SWITCH_COUNTER_NUM; + ctrl_addr = (KS_MIB_TOTAL_RX_1 - KS_MIB_TOTAL_RX_0) * port; + ctrl_addr += addr + KS_MIB_TOTAL_RX_0; + ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ); + + mutex_lock(&dev->alu_mutex); + ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr); + + /* It is almost guaranteed to always read the valid bit because of + * slow SPI speed. + */ + for (loop = 2; loop > 0; loop--) { + ksz_read8(dev, REG_IND_MIB_CHECK, &check); + + if (check & MIB_COUNTER_VALID) { + ksz_read32(dev, REG_IND_DATA_LO, &data); + if (addr < 2) { + u64 total; + + total = check & MIB_TOTAL_BYTES_H; + total <<= 32; + *cnt += total; + *cnt += data; + if (check & MIB_COUNTER_OVERFLOW) { + total = MIB_TOTAL_BYTES_H + 1; + total <<= 32; + *cnt += total; + } + } else { + if (check & MIB_COUNTER_OVERFLOW) + *cnt += MIB_PACKET_DROPPED + 1; + *cnt += data & MIB_PACKET_DROPPED; + } + break; + } + } + mutex_unlock(&dev->alu_mutex); +} + +static void ksz8795_freeze_mib(struct ksz_device *dev, int port, bool freeze) +{ + /* enable the port for flush/freeze function */ + if (freeze) + ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true); + ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FREEZE, freeze); + + /* disable the port after freeze is done */ + if (!freeze) + ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), false); +} + +static void ksz8795_port_init_cnt(struct ksz_device *dev, int port) +{ + struct ksz_port_mib *mib = &dev->ports[port].mib; + + /* flush all enabled port MIB counters */ + ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true); + ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FLUSH, true); + ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), false); + + mib->cnt_ptr = 0; + + /* Some ports may not have MIB counters before SWITCH_COUNTER_NUM. */ + while (mib->cnt_ptr < dev->reg_mib_cnt) { + dev->dev_ops->r_mib_cnt(dev, port, mib->cnt_ptr, + &mib->counters[mib->cnt_ptr]); + ++mib->cnt_ptr; + } + + /* Some ports may not have MIB counters after SWITCH_COUNTER_NUM. */ + while (mib->cnt_ptr < dev->mib_cnt) { + dev->dev_ops->r_mib_pkt(dev, port, mib->cnt_ptr, + NULL, &mib->counters[mib->cnt_ptr]); + ++mib->cnt_ptr; + } + mib->cnt_ptr = 0; + memset(mib->counters, 0, dev->mib_cnt * sizeof(u64)); +} + +static void ksz8795_r_table(struct ksz_device *dev, int table, u16 addr, + u64 *data) +{ + u16 ctrl_addr; + + ctrl_addr = IND_ACC_TABLE(table | TABLE_READ) | addr; + + mutex_lock(&dev->alu_mutex); + ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr); + ksz_read64(dev, REG_IND_DATA_HI, data); + mutex_unlock(&dev->alu_mutex); +} + +static void ksz8795_w_table(struct ksz_device *dev, int table, u16 addr, + u64 data) +{ + u16 ctrl_addr; + + ctrl_addr = IND_ACC_TABLE(table) | addr; + + mutex_lock(&dev->alu_mutex); + ksz_write64(dev, REG_IND_DATA_HI, data); + ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr); + mutex_unlock(&dev->alu_mutex); +} + +static int ksz8795_valid_dyn_entry(struct ksz_device *dev, u8 *data) +{ + int timeout = 100; + + do { + ksz_read8(dev, REG_IND_DATA_CHECK, data); + timeout--; + } while ((*data & DYNAMIC_MAC_TABLE_NOT_READY) && timeout); + + /* Entry is not ready for accessing. */ + if (*data & DYNAMIC_MAC_TABLE_NOT_READY) { + return -EAGAIN; + /* Entry is ready for accessing. */ + } else { + ksz_read8(dev, REG_IND_DATA_8, data); + + /* There is no valid entry in the table. */ + if (*data & DYNAMIC_MAC_TABLE_MAC_EMPTY) + return -ENXIO; + } + return 0; +} + +static int ksz8795_r_dyn_mac_table(struct ksz_device *dev, u16 addr, + u8 *mac_addr, u8 *fid, u8 *src_port, + u8 *timestamp, u16 *entries) +{ + u32 data_hi, data_lo; + u16 ctrl_addr; + u8 data; + int rc; + + ctrl_addr = IND_ACC_TABLE(TABLE_DYNAMIC_MAC | TABLE_READ) | addr; + + mutex_lock(&dev->alu_mutex); + ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr); + + rc = ksz8795_valid_dyn_entry(dev, &data); + if (rc == -EAGAIN) { + if (addr == 0) + *entries = 0; + } else if (rc == -ENXIO) { + *entries = 0; + /* At least one valid entry in the table. */ + } else { + u64 buf = 0; + int cnt; + + ksz_read64(dev, REG_IND_DATA_HI, &buf); + data_hi = (u32)(buf >> 32); + data_lo = (u32)buf; + + /* Check out how many valid entry in the table. */ + cnt = data & DYNAMIC_MAC_TABLE_ENTRIES_H; + cnt <<= DYNAMIC_MAC_ENTRIES_H_S; + cnt |= (data_hi & DYNAMIC_MAC_TABLE_ENTRIES) >> + DYNAMIC_MAC_ENTRIES_S; + *entries = cnt + 1; + + *fid = (data_hi & DYNAMIC_MAC_TABLE_FID) >> + DYNAMIC_MAC_FID_S; + *src_port = (data_hi & DYNAMIC_MAC_TABLE_SRC_PORT) >> + DYNAMIC_MAC_SRC_PORT_S; + *timestamp = (data_hi & DYNAMIC_MAC_TABLE_TIMESTAMP) >> + DYNAMIC_MAC_TIMESTAMP_S; + + mac_addr[5] = (u8)data_lo; + mac_addr[4] = (u8)(data_lo >> 8); + mac_addr[3] = (u8)(data_lo >> 16); + mac_addr[2] = (u8)(data_lo >> 24); + + mac_addr[1] = (u8)data_hi; + mac_addr[0] = (u8)(data_hi >> 8); + rc = 0; + } + mutex_unlock(&dev->alu_mutex); + + return rc; +} + +static int ksz8795_r_sta_mac_table(struct ksz_device *dev, u16 addr, + struct alu_struct *alu) +{ + u32 data_hi, data_lo; + u64 data; + + ksz8795_r_table(dev, TABLE_STATIC_MAC, addr, &data); + data_hi = data >> 32; + data_lo = (u32)data; + if (data_hi & (STATIC_MAC_TABLE_VALID | STATIC_MAC_TABLE_OVERRIDE)) { + alu->mac[5] = (u8)data_lo; + alu->mac[4] = (u8)(data_lo >> 8); + alu->mac[3] = (u8)(data_lo >> 16); + alu->mac[2] = (u8)(data_lo >> 24); + alu->mac[1] = (u8)data_hi; + alu->mac[0] = (u8)(data_hi >> 8); + alu->port_forward = (data_hi & STATIC_MAC_TABLE_FWD_PORTS) >> + STATIC_MAC_FWD_PORTS_S; + alu->is_override = + (data_hi & STATIC_MAC_TABLE_OVERRIDE) ? 1 : 0; + data_hi >>= 1; + alu->is_use_fid = (data_hi & STATIC_MAC_TABLE_USE_FID) ? 1 : 0; + alu->fid = (data_hi & STATIC_MAC_TABLE_FID) >> + STATIC_MAC_FID_S; + return 0; + } + return -ENXIO; +} + +static void ksz8795_w_sta_mac_table(struct ksz_device *dev, u16 addr, + struct alu_struct *alu) +{ + u32 data_hi, data_lo; + u64 data; + + data_lo = ((u32)alu->mac[2] << 24) | + ((u32)alu->mac[3] << 16) | + ((u32)alu->mac[4] << 8) | alu->mac[5]; + data_hi = ((u32)alu->mac[0] << 8) | alu->mac[1]; + data_hi |= (u32)alu->port_forward << STATIC_MAC_FWD_PORTS_S; + + if (alu->is_override) + data_hi |= STATIC_MAC_TABLE_OVERRIDE; + if (alu->is_use_fid) { + data_hi |= STATIC_MAC_TABLE_USE_FID; + data_hi |= (u32)alu->fid << STATIC_MAC_FID_S; + } + if (alu->is_static) + data_hi |= STATIC_MAC_TABLE_VALID; + else + data_hi &= ~STATIC_MAC_TABLE_OVERRIDE; + + data = (u64)data_hi << 32 | data_lo; + ksz8795_w_table(dev, TABLE_STATIC_MAC, addr, data); +} + +static void ksz8795_from_vlan(u16 vlan, u8 *fid, u8 *member, u8 *valid) +{ + *fid = vlan & VLAN_TABLE_FID; + *member = (vlan & VLAN_TABLE_MEMBERSHIP) >> VLAN_TABLE_MEMBERSHIP_S; + *valid = !!(vlan & VLAN_TABLE_VALID); +} + +static void ksz8795_to_vlan(u8 fid, u8 member, u8 valid, u16 *vlan) +{ + *vlan = fid; + *vlan |= (u16)member << VLAN_TABLE_MEMBERSHIP_S; + if (valid) + *vlan |= VLAN_TABLE_VALID; +} + +static void ksz8795_r_vlan_entries(struct ksz_device *dev, u16 addr) +{ + u64 data; + int i; + + ksz8795_r_table(dev, TABLE_VLAN, addr, &data); + addr *= 4; + for (i = 0; i < 4; i++) { + dev->vlan_cache[addr + i].table[0] = (u16)data; + data >>= VLAN_TABLE_S; + } +} + +static void ksz8795_r_vlan_table(struct ksz_device *dev, u16 vid, u16 *vlan) +{ + int index; + u16 *data; + u16 addr; + u64 buf; + + data = (u16 *)&buf; + addr = vid / 4; + index = vid & 3; + ksz8795_r_table(dev, TABLE_VLAN, addr, &buf); + *vlan = data[index]; +} + +static void ksz8795_w_vlan_table(struct ksz_device *dev, u16 vid, u16 vlan) +{ + int index; + u16 *data; + u16 addr; + u64 buf; + + data = (u16 *)&buf; + addr = vid / 4; + index = vid & 3; + ksz8795_r_table(dev, TABLE_VLAN, addr, &buf); + data[index] = vlan; + dev->vlan_cache[vid].table[0] = vlan; + ksz8795_w_table(dev, TABLE_VLAN, addr, buf); +} + +static void ksz8795_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val) +{ + u8 restart, speed, ctrl, link; + int processed = true; + u16 data = 0; + u8 p = phy; + + switch (reg) { + case PHY_REG_CTRL: + ksz_pread8(dev, p, P_NEG_RESTART_CTRL, &restart); + ksz_pread8(dev, p, P_SPEED_STATUS, &speed); + ksz_pread8(dev, p, P_FORCE_CTRL, &ctrl); + if (restart & PORT_PHY_LOOPBACK) + data |= PHY_LOOPBACK; + if (ctrl & PORT_FORCE_100_MBIT) + data |= PHY_SPEED_100MBIT; + if (!(ctrl & PORT_AUTO_NEG_DISABLE)) + data |= PHY_AUTO_NEG_ENABLE; + if (restart & PORT_POWER_DOWN) + data |= PHY_POWER_DOWN; + if (restart & PORT_AUTO_NEG_RESTART) + data |= PHY_AUTO_NEG_RESTART; + if (ctrl & PORT_FORCE_FULL_DUPLEX) + data |= PHY_FULL_DUPLEX; + if (speed & PORT_HP_MDIX) + data |= PHY_HP_MDIX; + if (restart & PORT_FORCE_MDIX) + data |= PHY_FORCE_MDIX; + if (restart & PORT_AUTO_MDIX_DISABLE) + data |= PHY_AUTO_MDIX_DISABLE; + if (restart & PORT_TX_DISABLE) + data |= PHY_TRANSMIT_DISABLE; + if (restart & PORT_LED_OFF) + data |= PHY_LED_DISABLE; + break; + case PHY_REG_STATUS: + ksz_pread8(dev, p, P_LINK_STATUS, &link); + data = PHY_100BTX_FD_CAPABLE | + PHY_100BTX_CAPABLE | + PHY_10BT_FD_CAPABLE | + PHY_10BT_CAPABLE | + PHY_AUTO_NEG_CAPABLE; + if (link & PORT_AUTO_NEG_COMPLETE) + data |= PHY_AUTO_NEG_ACKNOWLEDGE; + if (link & PORT_STAT_LINK_GOOD) + data |= PHY_LINK_STATUS; + break; + case PHY_REG_ID_1: + data = KSZ8795_ID_HI; + break; + case PHY_REG_ID_2: + data = KSZ8795_ID_LO; + break; + case PHY_REG_AUTO_NEGOTIATION: + ksz_pread8(dev, p, P_LOCAL_CTRL, &ctrl); + data = PHY_AUTO_NEG_802_3; + if (ctrl & PORT_AUTO_NEG_SYM_PAUSE) + data |= PHY_AUTO_NEG_SYM_PAUSE; + if (ctrl & PORT_AUTO_NEG_100BTX_FD) + data |= PHY_AUTO_NEG_100BTX_FD; + if (ctrl & PORT_AUTO_NEG_100BTX) + data |= PHY_AUTO_NEG_100BTX; + if (ctrl & PORT_AUTO_NEG_10BT_FD) + data |= PHY_AUTO_NEG_10BT_FD; + if (ctrl & PORT_AUTO_NEG_10BT) + data |= PHY_AUTO_NEG_10BT; + break; + case PHY_REG_REMOTE_CAPABILITY: + ksz_pread8(dev, p, P_REMOTE_STATUS, &link); + data = PHY_AUTO_NEG_802_3; + if (link & PORT_REMOTE_SYM_PAUSE) + data |= PHY_AUTO_NEG_SYM_PAUSE; + if (link & PORT_REMOTE_100BTX_FD) + data |= PHY_AUTO_NEG_100BTX_FD; + if (link & PORT_REMOTE_100BTX) + data |= PHY_AUTO_NEG_100BTX; + if (link & PORT_REMOTE_10BT_FD) + data |= PHY_AUTO_NEG_10BT_FD; + if (link & PORT_REMOTE_10BT) + data |= PHY_AUTO_NEG_10BT; + if (data & ~PHY_AUTO_NEG_802_3) + data |= PHY_REMOTE_ACKNOWLEDGE_NOT; + break; + default: + processed = false; + break; + } + if (processed) + *val = data; +} + +static void ksz8795_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val) +{ + u8 p = phy; + u8 restart, speed, ctrl, data; + + switch (reg) { + case PHY_REG_CTRL: + + /* Do not support PHY reset function. */ + if (val & PHY_RESET) + break; + ksz_pread8(dev, p, P_SPEED_STATUS, &speed); + data = speed; + if (val & PHY_HP_MDIX) + data |= PORT_HP_MDIX; + else + data &= ~PORT_HP_MDIX; + if (data != speed) + ksz_pwrite8(dev, p, P_SPEED_STATUS, data); + ksz_pread8(dev, p, P_FORCE_CTRL, &ctrl); + data = ctrl; + if (!(val & PHY_AUTO_NEG_ENABLE)) + data |= PORT_AUTO_NEG_DISABLE; + else + data &= ~PORT_AUTO_NEG_DISABLE; + + /* Fiber port does not support auto-negotiation. */ + if (dev->ports[p].fiber) + data |= PORT_AUTO_NEG_DISABLE; + if (val & PHY_SPEED_100MBIT) + data |= PORT_FORCE_100_MBIT; + else + data &= ~PORT_FORCE_100_MBIT; + if (val & PHY_FULL_DUPLEX) + data |= PORT_FORCE_FULL_DUPLEX; + else + data &= ~PORT_FORCE_FULL_DUPLEX; + if (data != ctrl) + ksz_pwrite8(dev, p, P_FORCE_CTRL, data); + ksz_pread8(dev, p, P_NEG_RESTART_CTRL, &restart); + data = restart; + if (val & PHY_LED_DISABLE) + data |= PORT_LED_OFF; + else + data &= ~PORT_LED_OFF; + if (val & PHY_TRANSMIT_DISABLE) + data |= PORT_TX_DISABLE; + else + data &= ~PORT_TX_DISABLE; + if (val & PHY_AUTO_NEG_RESTART) + data |= PORT_AUTO_NEG_RESTART; + else + data &= ~(PORT_AUTO_NEG_RESTART); + if (val & PHY_POWER_DOWN) + data |= PORT_POWER_DOWN; + else + data &= ~PORT_POWER_DOWN; + if (val & PHY_AUTO_MDIX_DISABLE) + data |= PORT_AUTO_MDIX_DISABLE; + else + data &= ~PORT_AUTO_MDIX_DISABLE; + if (val & PHY_FORCE_MDIX) + data |= PORT_FORCE_MDIX; + else + data &= ~PORT_FORCE_MDIX; + if (val & PHY_LOOPBACK) + data |= PORT_PHY_LOOPBACK; + else + data &= ~PORT_PHY_LOOPBACK; + if (data != restart) + ksz_pwrite8(dev, p, P_NEG_RESTART_CTRL, data); + break; + case PHY_REG_AUTO_NEGOTIATION: + ksz_pread8(dev, p, P_LOCAL_CTRL, &ctrl); + data = ctrl; + data &= ~(PORT_AUTO_NEG_SYM_PAUSE | + PORT_AUTO_NEG_100BTX_FD | + PORT_AUTO_NEG_100BTX | + PORT_AUTO_NEG_10BT_FD | + PORT_AUTO_NEG_10BT); + if (val & PHY_AUTO_NEG_SYM_PAUSE) + data |= PORT_AUTO_NEG_SYM_PAUSE; + if (val & PHY_AUTO_NEG_100BTX_FD) + data |= PORT_AUTO_NEG_100BTX_FD; + if (val & PHY_AUTO_NEG_100BTX) + data |= PORT_AUTO_NEG_100BTX; + if (val & PHY_AUTO_NEG_10BT_FD) + data |= PORT_AUTO_NEG_10BT_FD; + if (val & PHY_AUTO_NEG_10BT) + data |= PORT_AUTO_NEG_10BT; + if (data != ctrl) + ksz_pwrite8(dev, p, P_LOCAL_CTRL, data); + break; + default: + break; + } +} + +static enum dsa_tag_protocol ksz8795_get_tag_protocol(struct dsa_switch *ds, + int port) +{ + return DSA_TAG_PROTO_KSZ8795; +} + +static void ksz8795_get_strings(struct dsa_switch *ds, int port, + u32 stringset, uint8_t *buf) +{ + int i; + + for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) { + memcpy(buf + i * ETH_GSTRING_LEN, mib_names[i].string, + ETH_GSTRING_LEN); + } +} + +static void ksz8795_cfg_port_member(struct ksz_device *dev, int port, + u8 member) +{ + u8 data; + + ksz_pread8(dev, port, P_MIRROR_CTRL, &data); + data &= ~PORT_VLAN_MEMBERSHIP; + data |= (member & dev->port_mask); + ksz_pwrite8(dev, port, P_MIRROR_CTRL, data); + dev->ports[port].member = member; +} + +static void ksz8795_port_stp_state_set(struct dsa_switch *ds, int port, + u8 state) +{ + struct ksz_device *dev = ds->priv; + int forward = dev->member; + struct ksz_port *p; + int member = -1; + u8 data; + + p = &dev->ports[port]; + + ksz_pread8(dev, port, P_STP_CTRL, &data); + data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE); + + switch (state) { + case BR_STATE_DISABLED: + data |= PORT_LEARN_DISABLE; + if (port < SWITCH_PORT_NUM) + member = 0; + break; + case BR_STATE_LISTENING: + data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE); + if (port < SWITCH_PORT_NUM && + p->stp_state == BR_STATE_DISABLED) + member = dev->host_mask | p->vid_member; + break; + case BR_STATE_LEARNING: + data |= PORT_RX_ENABLE; + break; + case BR_STATE_FORWARDING: + data |= (PORT_TX_ENABLE | PORT_RX_ENABLE); + + /* This function is also used internally. */ + if (port == dev->cpu_port) + break; + + /* Port is a member of a bridge. */ + if (dev->br_member & BIT(port)) { + dev->member |= BIT(port); + member = dev->member; + } else { + member = dev->host_mask | p->vid_member; + } + break; + case BR_STATE_BLOCKING: + data |= PORT_LEARN_DISABLE; + if (port < SWITCH_PORT_NUM && + p->stp_state == BR_STATE_DISABLED) + member = dev->host_mask | p->vid_member; + break; + default: + dev_err(ds->dev, "invalid STP state: %d\n", state); + return; + } + + ksz_pwrite8(dev, port, P_STP_CTRL, data); + p->stp_state = state; + if (data & PORT_RX_ENABLE) + dev->rx_ports |= BIT(port); + else + dev->rx_ports &= ~BIT(port); + if (data & PORT_TX_ENABLE) + dev->tx_ports |= BIT(port); + else + dev->tx_ports &= ~BIT(port); + + /* Port membership may share register with STP state. */ + if (member >= 0 && member != p->member) + ksz8795_cfg_port_member(dev, port, (u8)member); + + /* Check if forwarding needs to be updated. */ + if (state != BR_STATE_FORWARDING) { + if (dev->br_member & BIT(port)) + dev->member &= ~BIT(port); + } + + /* When topology has changed the function ksz_update_port_member + * should be called to modify port forwarding behavior. + */ + if (forward != dev->member) + ksz_update_port_member(dev, port); +} + +static void ksz8795_flush_dyn_mac_table(struct ksz_device *dev, int port) +{ + u8 learn[TOTAL_PORT_NUM]; + int first, index, cnt; + struct ksz_port *p; + + if ((uint)port < TOTAL_PORT_NUM) { + first = port; + cnt = port + 1; + } else { + /* Flush all ports. */ + first = 0; + cnt = dev->mib_port_cnt; + } + for (index = first; index < cnt; index++) { + p = &dev->ports[index]; + if (!p->on) + continue; + ksz_pread8(dev, index, P_STP_CTRL, &learn[index]); + if (!(learn[index] & PORT_LEARN_DISABLE)) + ksz_pwrite8(dev, index, P_STP_CTRL, + learn[index] | PORT_LEARN_DISABLE); + } + ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_DYN_MAC_TABLE, true); + for (index = first; index < cnt; index++) { + p = &dev->ports[index]; + if (!p->on) + continue; + if (!(learn[index] & PORT_LEARN_DISABLE)) + ksz_pwrite8(dev, index, P_STP_CTRL, learn[index]); + } +} + +static int ksz8795_port_vlan_filtering(struct dsa_switch *ds, int port, + bool flag) +{ + struct ksz_device *dev = ds->priv; + + ksz_cfg(dev, S_MIRROR_CTRL, SW_VLAN_ENABLE, flag); + + return 0; +} + +static void ksz8795_port_vlan_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; + struct ksz_device *dev = ds->priv; + u16 data, vid, new_pvid = 0; + u8 fid, member, valid; + + ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged); + + for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) { + ksz8795_r_vlan_table(dev, vid, &data); + ksz8795_from_vlan(data, &fid, &member, &valid); + + /* First time to setup the VLAN entry. */ + if (!valid) { + /* Need to find a way to map VID to FID. */ + fid = 1; + valid = 1; + } + member |= BIT(port); + + ksz8795_to_vlan(fid, member, valid, &data); + ksz8795_w_vlan_table(dev, vid, data); + + /* change PVID */ + if (vlan->flags & BRIDGE_VLAN_INFO_PVID) + new_pvid = vid; + } + + if (new_pvid) { + ksz_pread16(dev, port, REG_PORT_CTRL_VID, &vid); + vid &= 0xfff; + vid |= new_pvid; + ksz_pwrite16(dev, port, REG_PORT_CTRL_VID, vid); + } +} + +static int ksz8795_port_vlan_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; + struct ksz_device *dev = ds->priv; + u16 data, vid, pvid, new_pvid = 0; + u8 fid, member, valid; + + ksz_pread16(dev, port, REG_PORT_CTRL_VID, &pvid); + pvid = pvid & 0xFFF; + + ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged); + + for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) { + ksz8795_r_vlan_table(dev, vid, &data); + ksz8795_from_vlan(data, &fid, &member, &valid); + + member &= ~BIT(port); + + /* Invalidate the entry if no more member. */ + if (!member) { + fid = 0; + valid = 0; + } + + if (pvid == vid) + new_pvid = 1; + + ksz8795_to_vlan(fid, member, valid, &data); + ksz8795_w_vlan_table(dev, vid, data); + } + + if (new_pvid != pvid) + ksz_pwrite16(dev, port, REG_PORT_CTRL_VID, pvid); + + return 0; +} + +static int ksz8795_port_mirror_add(struct dsa_switch *ds, int port, + struct dsa_mall_mirror_tc_entry *mirror, + bool ingress) +{ + struct ksz_device *dev = ds->priv; + + if (ingress) { + ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true); + dev->mirror_rx |= BIT(port); + } else { + ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true); + dev->mirror_tx |= BIT(port); + } + + ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false); + + /* configure mirror port */ + if (dev->mirror_rx || dev->mirror_tx) + ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL, + PORT_MIRROR_SNIFFER, true); + + return 0; +} + +static void ksz8795_port_mirror_del(struct dsa_switch *ds, int port, + struct dsa_mall_mirror_tc_entry *mirror) +{ + struct ksz_device *dev = ds->priv; + u8 data; + + if (mirror->ingress) { + ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false); + dev->mirror_rx &= ~BIT(port); + } else { + ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false); + dev->mirror_tx &= ~BIT(port); + } + + ksz_pread8(dev, port, P_MIRROR_CTRL, &data); + + if (!dev->mirror_rx && !dev->mirror_tx) + ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL, + PORT_MIRROR_SNIFFER, false); +} + +static void ksz8795_port_setup(struct ksz_device *dev, int port, bool cpu_port) +{ + struct ksz_port *p = &dev->ports[port]; + u8 data8, member; + + /* enable broadcast storm limit */ + ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true); + + ksz8795_set_prio_queue(dev, port, 4); + + /* disable DiffServ priority */ + ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_ENABLE, false); + + /* replace priority */ + ksz_port_cfg(dev, port, P_802_1P_CTRL, PORT_802_1P_REMAPPING, false); + + /* enable 802.1p priority */ + ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_ENABLE, true); + + if (cpu_port) { + /* Configure MII interface for proper network communication. */ + ksz_read8(dev, REG_PORT_5_CTRL_6, &data8); + data8 &= ~PORT_INTERFACE_TYPE; + data8 &= ~PORT_GMII_1GPS_MODE; + switch (dev->interface) { + case PHY_INTERFACE_MODE_MII: + p->phydev.speed = SPEED_100; + break; + case PHY_INTERFACE_MODE_RMII: + data8 |= PORT_INTERFACE_RMII; + p->phydev.speed = SPEED_100; + break; + case PHY_INTERFACE_MODE_GMII: + data8 |= PORT_GMII_1GPS_MODE; + data8 |= PORT_INTERFACE_GMII; + p->phydev.speed = SPEED_1000; + break; + default: + data8 &= ~PORT_RGMII_ID_IN_ENABLE; + data8 &= ~PORT_RGMII_ID_OUT_ENABLE; + if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID || + dev->interface == PHY_INTERFACE_MODE_RGMII_RXID) + data8 |= PORT_RGMII_ID_IN_ENABLE; + if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID || + dev->interface == PHY_INTERFACE_MODE_RGMII_TXID) + data8 |= PORT_RGMII_ID_OUT_ENABLE; + data8 |= PORT_GMII_1GPS_MODE; + data8 |= PORT_INTERFACE_RGMII; + p->phydev.speed = SPEED_1000; + break; + } + ksz_write8(dev, REG_PORT_5_CTRL_6, data8); + p->phydev.duplex = 1; + + member = dev->port_mask; + dev->on_ports = dev->host_mask; + dev->live_ports = dev->host_mask; + } else { + member = dev->host_mask | p->vid_member; + dev->on_ports |= BIT(port); + + /* Link was detected before port is enabled. */ + if (p->phydev.link) + dev->live_ports |= BIT(port); + } + ksz8795_cfg_port_member(dev, port, member); +} + +static void ksz8795_config_cpu_port(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + struct ksz_port *p; + u8 remote; + int i; + + ds->num_ports = dev->port_cnt + 1; + + /* Switch marks the maximum frame with extra byte as oversize. */ + ksz_cfg(dev, REG_SW_CTRL_2, SW_LEGAL_PACKET_DISABLE, true); + ksz_cfg(dev, S_TAIL_TAG_CTRL, SW_TAIL_TAG_ENABLE, true); + + p = &dev->ports[dev->cpu_port]; + p->vid_member = dev->port_mask; + p->on = 1; + + ksz8795_port_setup(dev, dev->cpu_port, true); + dev->member = dev->host_mask; + + for (i = 0; i < SWITCH_PORT_NUM; i++) { + p = &dev->ports[i]; + + /* Initialize to non-zero so that ksz_cfg_port_member() will + * be called. + */ + p->vid_member = BIT(i); + p->member = dev->port_mask; + ksz8795_port_stp_state_set(ds, i, BR_STATE_DISABLED); + + /* Last port may be disabled. */ + if (i == dev->port_cnt) + break; + p->on = 1; + p->phy = 1; + } + for (i = 0; i < dev->phy_port_cnt; i++) { + p = &dev->ports[i]; + if (!p->on) + continue; + ksz_pread8(dev, i, P_REMOTE_STATUS, &remote); + if (remote & PORT_FIBER_MODE) + p->fiber = 1; + if (p->fiber) + ksz_port_cfg(dev, i, P_STP_CTRL, PORT_FORCE_FLOW_CTRL, + true); + else + ksz_port_cfg(dev, i, P_STP_CTRL, PORT_FORCE_FLOW_CTRL, + false); + } +} + +static int ksz8795_setup(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + struct alu_struct alu; + int i, ret = 0; + + dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table), + dev->num_vlans, GFP_KERNEL); + if (!dev->vlan_cache) + return -ENOMEM; + + ret = ksz8795_reset_switch(dev); + if (ret) { + dev_err(ds->dev, "failed to reset switch\n"); + return ret; + } + + ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_FLOW_CTRL, true); + + /* Enable automatic fast aging when link changed detected. */ + ksz_cfg(dev, S_LINK_AGING_CTRL, SW_LINK_AUTO_AGING, true); + + /* Enable aggressive back off algorithm in half duplex mode. */ + regmap_update_bits(dev->regmap[0], REG_SW_CTRL_1, + SW_AGGR_BACKOFF, SW_AGGR_BACKOFF); + + /* + * Make sure unicast VLAN boundary is set as default and + * enable no excessive collision drop. + */ + regmap_update_bits(dev->regmap[0], REG_SW_CTRL_2, + UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP, + UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP); + + ksz8795_config_cpu_port(ds); + + ksz_cfg(dev, REG_SW_CTRL_2, MULTICAST_STORM_DISABLE, true); + + ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_REPLACE_VID, false); + + ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false); + + /* set broadcast storm protection 10% rate */ + regmap_update_bits(dev->regmap[1], S_REPLACE_VID_CTRL, + BROADCAST_STORM_RATE, + (BROADCAST_STORM_VALUE * + BROADCAST_STORM_PROT_RATE) / 100); + + for (i = 0; i < VLAN_TABLE_ENTRIES; i++) + ksz8795_r_vlan_entries(dev, i); + + /* Setup STP address for STP operation. */ + memset(&alu, 0, sizeof(alu)); + ether_addr_copy(alu.mac, eth_stp_addr); + alu.is_static = true; + alu.is_override = true; + alu.port_forward = dev->host_mask; + + ksz8795_w_sta_mac_table(dev, 0, &alu); + + ksz_init_mib_timer(dev); + + return 0; +} + +static const struct dsa_switch_ops ksz8795_switch_ops = { + .get_tag_protocol = ksz8795_get_tag_protocol, + .setup = ksz8795_setup, + .phy_read = ksz_phy_read16, + .phy_write = ksz_phy_write16, + .adjust_link = ksz_adjust_link, + .port_enable = ksz_enable_port, + .port_disable = ksz_disable_port, + .get_strings = ksz8795_get_strings, + .get_ethtool_stats = ksz_get_ethtool_stats, + .get_sset_count = ksz_sset_count, + .port_bridge_join = ksz_port_bridge_join, + .port_bridge_leave = ksz_port_bridge_leave, + .port_stp_state_set = ksz8795_port_stp_state_set, + .port_fast_age = ksz_port_fast_age, + .port_vlan_filtering = ksz8795_port_vlan_filtering, + .port_vlan_prepare = ksz_port_vlan_prepare, + .port_vlan_add = ksz8795_port_vlan_add, + .port_vlan_del = ksz8795_port_vlan_del, + .port_fdb_dump = ksz_port_fdb_dump, + .port_mdb_prepare = ksz_port_mdb_prepare, + .port_mdb_add = ksz_port_mdb_add, + .port_mdb_del = ksz_port_mdb_del, + .port_mirror_add = ksz8795_port_mirror_add, + .port_mirror_del = ksz8795_port_mirror_del, +}; + +static u32 ksz8795_get_port_addr(int port, int offset) +{ + return PORT_CTRL_ADDR(port, offset); +} + +static int ksz8795_switch_detect(struct ksz_device *dev) +{ + u8 id1, id2; + u16 id16; + int ret; + + /* read chip id */ + ret = ksz_read16(dev, REG_CHIP_ID0, &id16); + if (ret) + return ret; + + id1 = id16 >> 8; + id2 = id16 & SW_CHIP_ID_M; + if (id1 != FAMILY_ID || + (id2 != CHIP_ID_94 && id2 != CHIP_ID_95)) + return -ENODEV; + + dev->mib_port_cnt = TOTAL_PORT_NUM; + dev->phy_port_cnt = SWITCH_PORT_NUM; + dev->port_cnt = SWITCH_PORT_NUM; + + if (id2 == CHIP_ID_95) { + u8 val; + + id2 = 0x95; + ksz_read8(dev, REG_PORT_1_STATUS_0, &val); + if (val & PORT_FIBER_MODE) + id2 = 0x65; + } else if (id2 == CHIP_ID_94) { + dev->port_cnt--; + dev->last_port = dev->port_cnt; + id2 = 0x94; + } + id16 &= ~0xff; + id16 |= id2; + dev->chip_id = id16; + + dev->cpu_port = dev->mib_port_cnt - 1; + dev->host_mask = BIT(dev->cpu_port); + + return 0; +} + +struct ksz_chip_data { + u16 chip_id; + const char *dev_name; + int num_vlans; + int num_alus; + int num_statics; + int cpu_ports; + int port_cnt; +}; + +static const struct ksz_chip_data ksz8795_switch_chips[] = { + { + .chip_id = 0x8795, + .dev_name = "KSZ8795", + .num_vlans = 4096, + .num_alus = 0, + .num_statics = 8, + .cpu_ports = 0x10, /* can be configured as cpu port */ + .port_cnt = 4, /* total physical port count */ + }, + { + .chip_id = 0x8794, + .dev_name = "KSZ8794", + .num_vlans = 4096, + .num_alus = 0, + .num_statics = 8, + .cpu_ports = 0x10, /* can be configured as cpu port */ + .port_cnt = 3, /* total physical port count */ + }, + { + .chip_id = 0x8765, + .dev_name = "KSZ8765", + .num_vlans = 4096, + .num_alus = 0, + .num_statics = 8, + .cpu_ports = 0x10, /* can be configured as cpu port */ + .port_cnt = 4, /* total physical port count */ + }, +}; + +static int ksz8795_switch_init(struct ksz_device *dev) +{ + int i; + + mutex_init(&dev->stats_mutex); + mutex_init(&dev->alu_mutex); + mutex_init(&dev->vlan_mutex); + + dev->ds->ops = &ksz8795_switch_ops; + + for (i = 0; i < ARRAY_SIZE(ksz8795_switch_chips); i++) { + const struct ksz_chip_data *chip = &ksz8795_switch_chips[i]; + + if (dev->chip_id == chip->chip_id) { + dev->name = chip->dev_name; + dev->num_vlans = chip->num_vlans; + dev->num_alus = chip->num_alus; + dev->num_statics = chip->num_statics; + dev->port_cnt = chip->port_cnt; + dev->cpu_ports = chip->cpu_ports; + + break; + } + } + + /* no switch found */ + if (!dev->cpu_ports) + return -ENODEV; + + dev->port_mask = BIT(dev->port_cnt) - 1; + dev->port_mask |= dev->host_mask; + + dev->reg_mib_cnt = SWITCH_COUNTER_NUM; + dev->mib_cnt = TOTAL_SWITCH_COUNTER_NUM; + + i = dev->mib_port_cnt; + dev->ports = devm_kzalloc(dev->dev, sizeof(struct ksz_port) * i, + GFP_KERNEL); + if (!dev->ports) + return -ENOMEM; + for (i = 0; i < dev->mib_port_cnt; i++) { + mutex_init(&dev->ports[i].mib.cnt_mutex); + dev->ports[i].mib.counters = + devm_kzalloc(dev->dev, + sizeof(u64) * + (TOTAL_SWITCH_COUNTER_NUM + 1), + GFP_KERNEL); + if (!dev->ports[i].mib.counters) + return -ENOMEM; + } + + return 0; +} + +static void ksz8795_switch_exit(struct ksz_device *dev) +{ + ksz8795_reset_switch(dev); +} + +static const struct ksz_dev_ops ksz8795_dev_ops = { + .get_port_addr = ksz8795_get_port_addr, + .cfg_port_member = ksz8795_cfg_port_member, + .flush_dyn_mac_table = ksz8795_flush_dyn_mac_table, + .port_setup = ksz8795_port_setup, + .r_phy = ksz8795_r_phy, + .w_phy = ksz8795_w_phy, + .r_dyn_mac_table = ksz8795_r_dyn_mac_table, + .r_sta_mac_table = ksz8795_r_sta_mac_table, + .w_sta_mac_table = ksz8795_w_sta_mac_table, + .r_mib_cnt = ksz8795_r_mib_cnt, + .r_mib_pkt = ksz8795_r_mib_pkt, + .freeze_mib = ksz8795_freeze_mib, + .port_init_cnt = ksz8795_port_init_cnt, + .shutdown = ksz8795_reset_switch, + .detect = ksz8795_switch_detect, + .init = ksz8795_switch_init, + .exit = ksz8795_switch_exit, +}; + +int ksz8795_switch_register(struct ksz_device *dev) +{ + return ksz_switch_register(dev, &ksz8795_dev_ops); +} +EXPORT_SYMBOL(ksz8795_switch_register); + +MODULE_AUTHOR("Tristram Ha <Tristram.Ha@microchip.com>"); +MODULE_DESCRIPTION("Microchip KSZ8795 Series Switch DSA Driver"); +MODULE_LICENSE("GPL"); |