1 files changed, 53 insertions, 5 deletions

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 1a69286daa8d..68e2381694b9 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -681,7 +681,9 @@ int b53_configure_vlan(struct dsa_switch *ds)
 {
 	struct b53_device *dev = ds->priv;
 	struct b53_vlan vl = { 0 };
+	struct b53_vlan *v;
 	int i, def_vid;
+	u16 vid;
 
 	def_vid = b53_default_pvid(dev);
 
@@ -699,8 +701,18 @@ int b53_configure_vlan(struct dsa_switch *ds)
 		b53_write16(dev, B53_VLAN_PAGE,
 			    B53_VLAN_PORT_DEF_TAG(i), def_vid);
 
-	if (!is5325(dev) && !is5365(dev))
-		b53_set_jumbo(dev, dev->enable_jumbo, false);
+	/* Upon initial call we have not set-up any VLANs, but upon
+	 * system resume, we need to restore all VLAN entries.
+	 */
+	for (vid = def_vid; vid < dev->num_vlans; vid++) {
+		v = &dev->vlans[vid];
+
+		if (!v->members)
+			continue;
+
+		b53_set_vlan_entry(dev, vid, v);
+		b53_fast_age_vlan(dev, vid);
+	}
 
 	return 0;
 }
@@ -807,8 +819,6 @@ static int b53_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
 static int b53_reset_switch(struct b53_device *priv)
 {
 	/* reset vlans */
-	priv->enable_jumbo = false;
-
 	memset(priv->vlans, 0, sizeof(*priv->vlans) * priv->num_vlans);
 	memset(priv->ports, 0, sizeof(*priv->ports) * priv->num_ports);
 
@@ -1289,7 +1299,9 @@ EXPORT_SYMBOL(b53_phylink_mac_link_down);
 void b53_phylink_mac_link_up(struct dsa_switch *ds, int port,
 			     unsigned int mode,
 			     phy_interface_t interface,
-			     struct phy_device *phydev)
+			     struct phy_device *phydev,
+			     int speed, int duplex,
+			     bool tx_pause, bool rx_pause)
 {
 	struct b53_device *dev = ds->priv;
 
@@ -1343,6 +1355,14 @@ int b53_vlan_prepare(struct dsa_switch *ds, int port,
 	if ((is5325(dev) || is5365(dev)) && vlan->vid_begin == 0)
 		return -EOPNOTSUPP;
 
+	/* Port 7 on 7278 connects to the ASP's UniMAC which is not capable of
+	 * receiving VLAN tagged frames at all, we can still allow the port to
+	 * be configured for egress untagged.
+	 */
+	if (dev->chip_id == BCM7278_DEVICE_ID && port == 7 &&
+	    !(vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED))
+		return -EINVAL;
+
 	if (vlan->vid_end > dev->num_vlans)
 		return -ERANGE;
 
@@ -1708,6 +1728,12 @@ int b53_br_join(struct dsa_switch *ds, int port, struct net_device *br)
 	u16 pvlan, reg;
 	unsigned int i;
 
+	/* On 7278, port 7 which connects to the ASP should only receive
+	 * traffic from matching CFP rules.
+	 */
+	if (dev->chip_id == BCM7278_DEVICE_ID && port == 7)
+		return -EINVAL;
+
 	/* Make this port leave the all VLANs join since we will have proper
 	 * VLAN entries from now on
 	 */
@@ -2063,6 +2089,26 @@ int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
 }
 EXPORT_SYMBOL(b53_set_mac_eee);
 
+static int b53_change_mtu(struct dsa_switch *ds, int port, int mtu)
+{
+	struct b53_device *dev = ds->priv;
+	bool enable_jumbo;
+	bool allow_10_100;
+
+	if (is5325(dev) || is5365(dev))
+		return -EOPNOTSUPP;
+
+	enable_jumbo = (mtu >= JMS_MIN_SIZE);
+	allow_10_100 = (dev->chip_id == BCM583XX_DEVICE_ID);
+
+	return b53_set_jumbo(dev, enable_jumbo, allow_10_100);
+}
+
+static int b53_get_max_mtu(struct dsa_switch *ds, int port)
+{
+	return JMS_MAX_SIZE;
+}
+
 static const struct dsa_switch_ops b53_switch_ops = {
 	.get_tag_protocol	= b53_get_tag_protocol,
 	.setup			= b53_setup,
@@ -2100,6 +2146,8 @@ static const struct dsa_switch_ops b53_switch_ops = {
 	.port_mdb_prepare	= b53_mdb_prepare,
 	.port_mdb_add		= b53_mdb_add,
 	.port_mdb_del		= b53_mdb_del,
+	.port_max_mtu		= b53_get_max_mtu,
+	.port_change_mtu	= b53_change_mtu,
 };
 
 struct b53_chip_data {