diff options
Diffstat (limited to 'drivers/net/arcnet/com20020.c')
| -rw-r--r-- | drivers/net/arcnet/com20020.c | 263 |
1 files changed, 150 insertions, 113 deletions
diff --git a/drivers/net/arcnet/com20020.c b/drivers/net/arcnet/com20020.c index 1a8437842fbc..13d9ad4b3f5c 100644 --- a/drivers/net/arcnet/com20020.c +++ b/drivers/net/arcnet/com20020.c @@ -1,6 +1,6 @@ /* * Linux ARCnet driver - COM20020 chipset support - * + * * Written 1997 by David Woodhouse. * Written 1994-1999 by Avery Pennarun. * Written 1999 by Martin Mares <mj@ucw.cz>. @@ -25,6 +25,9 @@ * * ********************** */ + +#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/kernel.h> #include <linux/types.h> @@ -34,17 +37,16 @@ #include <linux/netdevice.h> #include <linux/init.h> #include <linux/interrupt.h> -#include <linux/arcdevice.h> -#include <linux/com20020.h> +#include <linux/io.h> -#include <asm/io.h> +#include "arcdevice.h" +#include "com20020.h" -#define VERSION "arcnet: COM20020 chipset support (by David Woodhouse et al.)\n" - -static char *clockrates[] = -{"10 Mb/s", "Reserved", "5 Mb/s", - "2.5 Mb/s", "1.25Mb/s", "625 Kb/s", "312.5 Kb/s", - "156.25 Kb/s", "Reserved", "Reserved", "Reserved"}; +static const char * const clockrates[] = { + "XXXXXXX", "XXXXXXXX", "XXXXXX", "2.5 Mb/s", + "1.25Mb/s", "625 Kb/s", "312.5 Kb/s", "156.25 Kb/s", + "Reserved", "Reserved", "Reserved" +}; static void com20020_command(struct net_device *dev, int command); static int com20020_status(struct net_device *dev); @@ -63,35 +65,38 @@ static void com20020_copy_from_card(struct net_device *dev, int bufnum, int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset; /* set up the address register */ - outb((ofs >> 8) | RDDATAflag | AUTOINCflag, _ADDR_HI); - outb(ofs & 0xff, _ADDR_LO); + arcnet_outb((ofs >> 8) | RDDATAflag | AUTOINCflag, + ioaddr, COM20020_REG_W_ADDR_HI); + arcnet_outb(ofs & 0xff, ioaddr, COM20020_REG_W_ADDR_LO); /* copy the data */ - TIME("insb", count, insb(_MEMDATA, buf, count)); + TIME(dev, "insb", count, + arcnet_insb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count)); } - static void com20020_copy_to_card(struct net_device *dev, int bufnum, int offset, void *buf, int count) { int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset; /* set up the address register */ - outb((ofs >> 8) | AUTOINCflag, _ADDR_HI); - outb(ofs & 0xff, _ADDR_LO); + arcnet_outb((ofs >> 8) | AUTOINCflag, ioaddr, COM20020_REG_W_ADDR_HI); + arcnet_outb(ofs & 0xff, ioaddr, COM20020_REG_W_ADDR_LO); /* copy the data */ - TIME("outsb", count, outsb(_MEMDATA, buf, count)); + TIME(dev, "outsb", count, + arcnet_outsb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count)); } - /* Reset the card and check some basic stuff during the detection stage. */ int com20020_check(struct net_device *dev) { int ioaddr = dev->base_addr, status; struct arcnet_local *lp = netdev_priv(dev); - ARCRESET0; + arcnet_outb(XTOcfg(3) | RESETcfg, ioaddr, COM20020_REG_W_CONFIG); + udelay(5); + arcnet_outb(XTOcfg(3), ioaddr, COM20020_REG_W_CONFIG); mdelay(RESETtime); lp->setup = lp->clockm ? 0 : (lp->clockp << 1); @@ -101,49 +106,46 @@ int com20020_check(struct net_device *dev) /* Enable P1Mode for backplane mode */ lp->setup = lp->setup | P1MODE; - SET_SUBADR(SUB_SETUP1); - outb(lp->setup, _XREG); + com20020_set_subaddress(lp, ioaddr, SUB_SETUP1); + arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG); + + if (lp->clockm != 0) { + com20020_set_subaddress(lp, ioaddr, SUB_SETUP2); + arcnet_outb(lp->setup2, ioaddr, COM20020_REG_W_XREG); - if (lp->clockm != 0) - { - SET_SUBADR(SUB_SETUP2); - outb(lp->setup2, _XREG); - /* must now write the magic "restart operation" command */ mdelay(1); - outb(0x18, _COMMAND); + arcnet_outb(STARTIOcmd, ioaddr, COM20020_REG_W_COMMAND); } - lp->config = 0x21 | (lp->timeout << 3) | (lp->backplane << 2); + lp->config = (lp->timeout << 3) | (lp->backplane << 2) | SUB_NODE; /* set node ID to 0x42 (but transmitter is disabled, so it's okay) */ - SETCONF; - outb(0x42, ioaddr + BUS_ALIGN*7); + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); + arcnet_outb(0x42, ioaddr, COM20020_REG_W_XREG); - status = ASTATUS(); + status = arcnet_inb(ioaddr, COM20020_REG_R_STATUS); if ((status & 0x99) != (NORXflag | TXFREEflag | RESETflag)) { - BUGMSG(D_NORMAL, "status invalid (%Xh).\n", status); + arc_printk(D_NORMAL, dev, "status invalid (%Xh).\n", status); return -ENODEV; } - BUGMSG(D_INIT_REASONS, "status after reset: %X\n", status); - - /* Enable TX */ - outb(0x39, _CONFIG); - outb(inb(ioaddr + BUS_ALIGN*8), ioaddr + BUS_ALIGN*7); - - ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear); + arc_printk(D_INIT_REASONS, dev, "status after reset: %X\n", status); - status = ASTATUS(); - BUGMSG(D_INIT_REASONS, "status after reset acknowledged: %X\n", - status); + arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear, + ioaddr, COM20020_REG_W_COMMAND); + status = arcnet_inb(ioaddr, COM20020_REG_R_STATUS); + arc_printk(D_INIT_REASONS, dev, "status after reset acknowledged: %X\n", + status); /* Read first location of memory */ - outb(0 | RDDATAflag | AUTOINCflag, _ADDR_HI); - outb(0, _ADDR_LO); - - if ((status = inb(_MEMDATA)) != TESTvalue) { - BUGMSG(D_NORMAL, "Signature byte not found (%02Xh != D1h).\n", - status); + arcnet_outb(0 | RDDATAflag | AUTOINCflag, + ioaddr, COM20020_REG_W_ADDR_HI); + arcnet_outb(0, ioaddr, COM20020_REG_W_ADDR_LO); + + status = arcnet_inb(ioaddr, COM20020_REG_RW_MEMDATA); + if (status != TESTvalue) { + arc_printk(D_NORMAL, dev, "Signature byte not found (%02Xh != D1h).\n", + status); return -ENODEV; } return 0; @@ -156,15 +158,39 @@ static int com20020_set_hwaddr(struct net_device *dev, void *addr) struct sockaddr *hwaddr = addr; memcpy(dev->dev_addr, hwaddr->sa_data, 1); - SET_SUBADR(SUB_NODE); - outb(dev->dev_addr[0], _XREG); + com20020_set_subaddress(lp, ioaddr, SUB_NODE); + arcnet_outb(dev->dev_addr[0], ioaddr, COM20020_REG_W_XREG); + + return 0; +} + +static int com20020_netdev_open(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + struct arcnet_local *lp = netdev_priv(dev); + + lp->config |= TXENcfg; + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); + return arcnet_open(dev); +} + +static int com20020_netdev_close(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + struct arcnet_local *lp = netdev_priv(dev); + + arcnet_close(dev); + + /* disable transmitter */ + lp->config &= ~TXENcfg; + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); return 0; } const struct net_device_ops com20020_netdev_ops = { - .ndo_open = arcnet_open, - .ndo_stop = arcnet_close, + .ndo_open = com20020_netdev_open, + .ndo_stop = com20020_netdev_close, .ndo_start_xmit = arcnet_send_packet, .ndo_tx_timeout = arcnet_timeout, .ndo_set_mac_address = com20020_set_hwaddr, @@ -192,48 +218,54 @@ int com20020_found(struct net_device *dev, int shared) lp->hw.copy_from_card = com20020_copy_from_card; lp->hw.close = com20020_close; + /* FIXME: do this some other way! */ if (!dev->dev_addr[0]) - dev->dev_addr[0] = inb(ioaddr + BUS_ALIGN*8); /* FIXME: do this some other way! */ + dev->dev_addr[0] = arcnet_inb(ioaddr, 8); + + com20020_set_subaddress(lp, ioaddr, SUB_SETUP1); + arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG); - SET_SUBADR(SUB_SETUP1); - outb(lp->setup, _XREG); + if (lp->card_flags & ARC_CAN_10MBIT) { + com20020_set_subaddress(lp, ioaddr, SUB_SETUP2); + arcnet_outb(lp->setup2, ioaddr, COM20020_REG_W_XREG); - if (lp->card_flags & ARC_CAN_10MBIT) - { - SET_SUBADR(SUB_SETUP2); - outb(lp->setup2, _XREG); - /* must now write the magic "restart operation" command */ mdelay(1); - outb(0x18, _COMMAND); + arcnet_outb(STARTIOcmd, ioaddr, COM20020_REG_W_COMMAND); } - lp->config = 0x20 | (lp->timeout << 3) | (lp->backplane << 2) | 1; + lp->config = (lp->timeout << 3) | (lp->backplane << 2) | SUB_NODE; /* Default 0x38 + register: Node ID */ - SETCONF; - outb(dev->dev_addr[0], _XREG); + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); + arcnet_outb(dev->dev_addr[0], ioaddr, COM20020_REG_W_XREG); /* reserve the irq */ if (request_irq(dev->irq, arcnet_interrupt, shared, "arcnet (COM20020)", dev)) { - BUGMSG(D_NORMAL, "Can't get IRQ %d!\n", dev->irq); + arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", dev->irq); return -ENODEV; } dev->base_addr = ioaddr; - BUGMSG(D_NORMAL, "%s: station %02Xh found at %03lXh, IRQ %d.\n", - lp->card_name, dev->dev_addr[0], dev->base_addr, dev->irq); + arc_printk(D_NORMAL, dev, "%s: station %02Xh found at %03lXh, IRQ %d.\n", + lp->card_name, dev->dev_addr[0], dev->base_addr, dev->irq); if (lp->backplane) - BUGMSG(D_NORMAL, "Using backplane mode.\n"); + arc_printk(D_NORMAL, dev, "Using backplane mode.\n"); if (lp->timeout != 3) - BUGMSG(D_NORMAL, "Using extended timeout value of %d.\n", lp->timeout); - - BUGMSG(D_NORMAL, "Using CKP %d - data rate %s.\n", - lp->setup >> 1, - clockrates[3 - ((lp->setup2 & 0xF0) >> 4) + ((lp->setup & 0x0F) >> 1)]); + arc_printk(D_NORMAL, dev, "Using extended timeout value of %d\n", + lp->timeout); + + arc_printk(D_NORMAL, dev, "Using CKP %d - data rate %s\n", + lp->setup >> 1, + clockrates[3 - + ((lp->setup2 & 0xF0) >> 4) + + ((lp->setup & 0x0F) >> 1)]); + /* The clockrates array index looks very fragile. + * It seems like it could have negative indexing. + */ if (register_netdev(dev)) { free_irq(dev->irq, dev); @@ -242,10 +274,8 @@ int com20020_found(struct net_device *dev, int shared) return 0; } - -/* - * Do a hardware reset on the card, and set up necessary registers. - * +/* Do a hardware reset on the card, and set up necessary registers. + * * This should be called as little as possible, because it disrupts the * token on the network (causes a RECON) and requires a significant delay. * @@ -257,65 +287,71 @@ static int com20020_reset(struct net_device *dev, int really_reset) u_int ioaddr = dev->base_addr; u_char inbyte; - BUGMSG(D_DEBUG, "%s: %d: %s: dev: %p, lp: %p, dev->name: %s\n", - __FILE__,__LINE__,__func__,dev,lp,dev->name); - BUGMSG(D_INIT, "Resetting %s (status=%02Xh)\n", - dev->name, ASTATUS()); + arc_printk(D_DEBUG, dev, "%s: %d: %s: dev: %p, lp: %p, dev->name: %s\n", + __FILE__, __LINE__, __func__, dev, lp, dev->name); + arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n", + dev->name, arcnet_inb(ioaddr, COM20020_REG_R_STATUS)); - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); - lp->config = TXENcfg | (lp->timeout << 3) | (lp->backplane << 2); + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); + lp->config |= (lp->timeout << 3) | (lp->backplane << 2); /* power-up defaults */ - SETCONF; - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); if (really_reset) { /* reset the card */ - ARCRESET; - mdelay(RESETtime * 2); /* COM20020 seems to be slower sometimes */ + arcnet_outb(lp->config | RESETcfg, ioaddr, COM20020_REG_W_CONFIG); + udelay(5); + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); + mdelay(RESETtime * 2); + /* COM20020 seems to be slower sometimes */ } /* clear flags & end reset */ - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); - ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear); + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); + arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear, + ioaddr, COM20020_REG_W_COMMAND); /* verify that the ARCnet signature byte is present */ - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); com20020_copy_from_card(dev, 0, 0, &inbyte, 1); - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); if (inbyte != TESTvalue) { - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); - BUGMSG(D_NORMAL, "reset failed: TESTvalue not present.\n"); + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", + __FILE__, __LINE__, __func__); + arc_printk(D_NORMAL, dev, "reset failed: TESTvalue not present.\n"); return 1; } /* enable extended (512-byte) packets */ - ACOMMAND(CONFIGcmd | EXTconf); - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); + arcnet_outb(CONFIGcmd | EXTconf, ioaddr, COM20020_REG_W_COMMAND); + + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); /* done! return success. */ return 0; } - static void com20020_setmask(struct net_device *dev, int mask) { u_int ioaddr = dev->base_addr; - BUGMSG(D_DURING, "Setting mask to %x at %x\n",mask,ioaddr); - AINTMASK(mask); -} + arc_printk(D_DURING, dev, "Setting mask to %x at %x\n", mask, ioaddr); + arcnet_outb(mask, ioaddr, COM20020_REG_W_INTMASK); +} static void com20020_command(struct net_device *dev, int cmd) { u_int ioaddr = dev->base_addr; - ACOMMAND(cmd); -} + arcnet_outb(cmd, ioaddr, COM20020_REG_W_COMMAND); +} static int com20020_status(struct net_device *dev) { u_int ioaddr = dev->base_addr; - return ASTATUS() + (ADIAGSTATUS()<<8); + return arcnet_inb(ioaddr, COM20020_REG_R_STATUS) + + (arcnet_inb(ioaddr, COM20020_REG_R_DIAGSTAT) << 8); } static void com20020_close(struct net_device *dev) @@ -325,7 +361,7 @@ static void com20020_close(struct net_device *dev) /* disable transmitter */ lp->config &= ~TXENcfg; - SETCONF; + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); } /* Set or clear the multicast filter for this adaptor. @@ -340,20 +376,20 @@ static void com20020_set_mc_list(struct net_device *dev) struct arcnet_local *lp = netdev_priv(dev); int ioaddr = dev->base_addr; - if ((dev->flags & IFF_PROMISC) && (dev->flags & IFF_UP)) { /* Enable promiscuous mode */ + if ((dev->flags & IFF_PROMISC) && (dev->flags & IFF_UP)) { + /* Enable promiscuous mode */ if (!(lp->setup & PROMISCset)) - BUGMSG(D_NORMAL, "Setting promiscuous flag...\n"); - SET_SUBADR(SUB_SETUP1); + arc_printk(D_NORMAL, dev, "Setting promiscuous flag...\n"); + com20020_set_subaddress(lp, ioaddr, SUB_SETUP1); lp->setup |= PROMISCset; - outb(lp->setup, _XREG); - } else + arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG); + } else { /* Disable promiscuous mode, use normal mode */ - { if ((lp->setup & PROMISCset)) - BUGMSG(D_NORMAL, "Resetting promiscuous flag...\n"); - SET_SUBADR(SUB_SETUP1); + arc_printk(D_NORMAL, dev, "Resetting promiscuous flag...\n"); + com20020_set_subaddress(lp, ioaddr, SUB_SETUP1); lp->setup &= ~PROMISCset; - outb(lp->setup, _XREG); + arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG); } } @@ -371,7 +407,8 @@ MODULE_LICENSE("GPL"); static int __init com20020_module_init(void) { - BUGLVL(D_NORMAL) printk(VERSION); + if (BUGLVL(D_NORMAL)) + pr_info("%s\n", "COM20020 chipset support (by David Woodhouse et al.)"); return 0; } |