diff options
Diffstat (limited to 'drivers/mtd')
| -rw-r--r-- | drivers/mtd/spi-nor/core.c | 169 | ||||
| -rw-r--r-- | drivers/mtd/spi-nor/core.h | 158 |
2 files changed, 169 insertions, 158 deletions
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c index 4ae79c1c8bec..aae94e4250f6 100644 --- a/drivers/mtd/spi-nor/core.c +++ b/drivers/mtd/spi-nor/core.c @@ -38,101 +38,9 @@ */ #define CHIP_ERASE_2MB_READY_WAIT_JIFFIES (40UL * HZ) -#define SPI_NOR_MAX_ID_LEN 6 #define SPI_NOR_MAX_ADDR_WIDTH 4 -/** - * struct spi_nor_fixups - SPI NOR fixup hooks - * @default_init: called after default flash parameters init. Used to tweak - * flash parameters when information provided by the flash_info - * table is incomplete or wrong. - * @post_bfpt: called after the BFPT table has been parsed - * @post_sfdp: called after SFDP has been parsed (is also called for SPI NORs - * that do not support RDSFDP). Typically used to tweak various - * parameters that could not be extracted by other means (i.e. - * when information provided by the SFDP/flash_info tables are - * incomplete or wrong). - * - * Those hooks can be used to tweak the SPI NOR configuration when the SFDP - * table is broken or not available. - */ -struct spi_nor_fixups { - void (*default_init)(struct spi_nor *nor); - int (*post_bfpt)(struct spi_nor *nor, - const struct sfdp_parameter_header *bfpt_header, - const struct sfdp_bfpt *bfpt, - struct spi_nor_flash_parameter *params); - void (*post_sfdp)(struct spi_nor *nor); -}; - -struct flash_info { - char *name; - - /* - * This array stores the ID bytes. - * The first three bytes are the JEDIC ID. - * JEDEC ID zero means "no ID" (mostly older chips). - */ - u8 id[SPI_NOR_MAX_ID_LEN]; - u8 id_len; - - /* The size listed here is what works with SPINOR_OP_SE, which isn't - * necessarily called a "sector" by the vendor. - */ - unsigned sector_size; - u16 n_sectors; - - u16 page_size; - u16 addr_width; - - u32 flags; -#define SECT_4K BIT(0) /* SPINOR_OP_BE_4K works uniformly */ -#define SPI_NOR_NO_ERASE BIT(1) /* No erase command needed */ -#define SST_WRITE BIT(2) /* use SST byte programming */ -#define SPI_NOR_NO_FR BIT(3) /* Can't do fastread */ -#define SECT_4K_PMC BIT(4) /* SPINOR_OP_BE_4K_PMC works uniformly */ -#define SPI_NOR_DUAL_READ BIT(5) /* Flash supports Dual Read */ -#define SPI_NOR_QUAD_READ BIT(6) /* Flash supports Quad Read */ -#define USE_FSR BIT(7) /* use flag status register */ -#define SPI_NOR_HAS_LOCK BIT(8) /* Flash supports lock/unlock via SR */ -#define SPI_NOR_HAS_TB BIT(9) /* - * Flash SR has Top/Bottom (TB) protect - * bit. Must be used with - * SPI_NOR_HAS_LOCK. - */ -#define SPI_NOR_XSR_RDY BIT(10) /* - * S3AN flashes have specific opcode to - * read the status register. - * Flags SPI_NOR_XSR_RDY and SPI_S3AN - * use the same bit as one implies the - * other, but we will get rid of - * SPI_S3AN soon. - */ -#define SPI_S3AN BIT(10) /* - * Xilinx Spartan 3AN In-System Flash - * (MFR cannot be used for probing - * because it has the same value as - * ATMEL flashes) - */ -#define SPI_NOR_4B_OPCODES BIT(11) /* - * Use dedicated 4byte address op codes - * to support memory size above 128Mib. - */ -#define NO_CHIP_ERASE BIT(12) /* Chip does not support chip erase */ -#define SPI_NOR_SKIP_SFDP BIT(13) /* Skip parsing of SFDP tables */ -#define USE_CLSR BIT(14) /* use CLSR command */ -#define SPI_NOR_OCTAL_READ BIT(15) /* Flash supports Octal Read */ -#define SPI_NOR_TB_SR_BIT6 BIT(16) /* - * Top/Bottom (TB) is bit 6 of - * status register. Must be used with - * SPI_NOR_HAS_TB. - */ - - /* Part specific fixup hooks. */ - const struct spi_nor_fixups *fixups; -}; - -#define JEDEC_MFR(info) ((info)->id[0]) +#define JEDEC_MFR(info) ((info)->id[0]) /** * spi_nor_spimem_bounce() - check if a bounce buffer is needed for the data @@ -295,8 +203,8 @@ static ssize_t spi_nor_spimem_write_data(struct spi_nor *nor, loff_t to, * * Return: number of bytes written successfully, -errno otherwise */ -static ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len, - const u8 *buf) +ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len, + const u8 *buf) { if (nor->spimem) return spi_nor_spimem_write_data(nor, to, len, buf); @@ -310,7 +218,7 @@ static ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len, * * Return: 0 on success, -errno otherwise. */ -static int spi_nor_write_enable(struct spi_nor *nor) +int spi_nor_write_enable(struct spi_nor *nor) { int ret; @@ -339,7 +247,7 @@ static int spi_nor_write_enable(struct spi_nor *nor) * * Return: 0 on success, -errno otherwise. */ -static int spi_nor_write_disable(struct spi_nor *nor) +int spi_nor_write_disable(struct spi_nor *nor) { int ret; @@ -463,7 +371,7 @@ static int spi_nor_read_cr(struct spi_nor *nor, u8 *cr) * * Return: 0 on success, -errno otherwise. */ -static int spi_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable) +int spi_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable) { int ret; @@ -556,7 +464,7 @@ static int spansion_set_4byte_addr_mode(struct spi_nor *nor, bool enable) * * Return: 0 on success, -errno otherwise. */ -static int spi_nor_write_ear(struct spi_nor *nor, u8 ear) +int spi_nor_write_ear(struct spi_nor *nor, u8 ear) { int ret; @@ -621,7 +529,7 @@ static int winbond_set_4byte_addr_mode(struct spi_nor *nor, bool enable) * * Return: 0 on success, -errno otherwise. */ -static int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr) +int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr) { int ret; @@ -834,7 +742,7 @@ static int spi_nor_wait_till_ready_with_timeout(struct spi_nor *nor, * * Return: 0 on success, -errno otherwise. */ -static int spi_nor_wait_till_ready(struct spi_nor *nor) +int spi_nor_wait_till_ready(struct spi_nor *nor) { return spi_nor_wait_till_ready_with_timeout(nor, DEFAULT_READY_WAIT_JIFFIES); @@ -1142,11 +1050,6 @@ static int spi_nor_erase_chip(struct spi_nor *nor) return ret; } -static struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd) -{ - return mtd->priv; -} - static u8 spi_nor_convert_opcode(u8 opcode, const u8 table[][2], size_t size) { size_t i; @@ -1225,7 +1128,7 @@ static void spi_nor_set_4byte_opcodes(struct spi_nor *nor) } } -static int spi_nor_lock_and_prep(struct spi_nor *nor) +int spi_nor_lock_and_prep(struct spi_nor *nor) { int ret = 0; @@ -1241,7 +1144,7 @@ static int spi_nor_lock_and_prep(struct spi_nor *nor) return ret; } -static void spi_nor_unlock_and_unprep(struct spi_nor *nor) +void spi_nor_unlock_and_unprep(struct spi_nor *nor) { if (nor->controller_ops && nor->controller_ops->unprepare) nor->controller_ops->unprepare(nor); @@ -2104,56 +2007,6 @@ int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor) return 0; } -/* Used when the "_ext_id" is two bytes at most */ -#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \ - .id = { \ - ((_jedec_id) >> 16) & 0xff, \ - ((_jedec_id) >> 8) & 0xff, \ - (_jedec_id) & 0xff, \ - ((_ext_id) >> 8) & 0xff, \ - (_ext_id) & 0xff, \ - }, \ - .id_len = (!(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))), \ - .sector_size = (_sector_size), \ - .n_sectors = (_n_sectors), \ - .page_size = 256, \ - .flags = (_flags), - -#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \ - .id = { \ - ((_jedec_id) >> 16) & 0xff, \ - ((_jedec_id) >> 8) & 0xff, \ - (_jedec_id) & 0xff, \ - ((_ext_id) >> 16) & 0xff, \ - ((_ext_id) >> 8) & 0xff, \ - (_ext_id) & 0xff, \ - }, \ - .id_len = 6, \ - .sector_size = (_sector_size), \ - .n_sectors = (_n_sectors), \ - .page_size = 256, \ - .flags = (_flags), - -#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width, _flags) \ - .sector_size = (_sector_size), \ - .n_sectors = (_n_sectors), \ - .page_size = (_page_size), \ - .addr_width = (_addr_width), \ - .flags = (_flags), - -#define S3AN_INFO(_jedec_id, _n_sectors, _page_size) \ - .id = { \ - ((_jedec_id) >> 16) & 0xff, \ - ((_jedec_id) >> 8) & 0xff, \ - (_jedec_id) & 0xff \ - }, \ - .id_len = 3, \ - .sector_size = (8*_page_size), \ - .n_sectors = (_n_sectors), \ - .page_size = _page_size, \ - .addr_width = 3, \ - .flags = SPI_NOR_NO_FR | SPI_S3AN, - static int is25lp256_post_bfpt_fixups(struct spi_nor *nor, const struct sfdp_parameter_header *bfpt_header, diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h index e1256fe50d12..abec65081519 100644 --- a/drivers/mtd/spi-nor/core.h +++ b/drivers/mtd/spi-nor/core.h @@ -9,12 +9,165 @@ #include "sfdp.h" +#define SPI_NOR_MAX_ID_LEN 6 + +/** + * struct spi_nor_fixups - SPI NOR fixup hooks + * @default_init: called after default flash parameters init. Used to tweak + * flash parameters when information provided by the flash_info + * table is incomplete or wrong. + * @post_bfpt: called after the BFPT table has been parsed + * @post_sfdp: called after SFDP has been parsed (is also called for SPI NORs + * that do not support RDSFDP). Typically used to tweak various + * parameters that could not be extracted by other means (i.e. + * when information provided by the SFDP/flash_info tables are + * incomplete or wrong). + * + * Those hooks can be used to tweak the SPI NOR configuration when the SFDP + * table is broken or not available. + */ +struct spi_nor_fixups { + void (*default_init)(struct spi_nor *nor); + int (*post_bfpt)(struct spi_nor *nor, + const struct sfdp_parameter_header *bfpt_header, + const struct sfdp_bfpt *bfpt, + struct spi_nor_flash_parameter *params); + void (*post_sfdp)(struct spi_nor *nor); +}; + +struct flash_info { + char *name; + + /* + * This array stores the ID bytes. + * The first three bytes are the JEDIC ID. + * JEDEC ID zero means "no ID" (mostly older chips). + */ + u8 id[SPI_NOR_MAX_ID_LEN]; + u8 id_len; + + /* The size listed here is what works with SPINOR_OP_SE, which isn't + * necessarily called a "sector" by the vendor. + */ + unsigned sector_size; + u16 n_sectors; + + u16 page_size; + u16 addr_width; + + u32 flags; +#define SECT_4K BIT(0) /* SPINOR_OP_BE_4K works uniformly */ +#define SPI_NOR_NO_ERASE BIT(1) /* No erase command needed */ +#define SST_WRITE BIT(2) /* use SST byte programming */ +#define SPI_NOR_NO_FR BIT(3) /* Can't do fastread */ +#define SECT_4K_PMC BIT(4) /* SPINOR_OP_BE_4K_PMC works uniformly */ +#define SPI_NOR_DUAL_READ BIT(5) /* Flash supports Dual Read */ +#define SPI_NOR_QUAD_READ BIT(6) /* Flash supports Quad Read */ +#define USE_FSR BIT(7) /* use flag status register */ +#define SPI_NOR_HAS_LOCK BIT(8) /* Flash supports lock/unlock via SR */ +#define SPI_NOR_HAS_TB BIT(9) /* + * Flash SR has Top/Bottom (TB) protect + * bit. Must be used with + * SPI_NOR_HAS_LOCK. + */ +#define SPI_NOR_XSR_RDY BIT(10) /* + * S3AN flashes have specific opcode to + * read the status register. + * Flags SPI_NOR_XSR_RDY and SPI_S3AN + * use the same bit as one implies the + * other, but we will get rid of + * SPI_S3AN soon. + */ +#define SPI_S3AN BIT(10) /* + * Xilinx Spartan 3AN In-System Flash + * (MFR cannot be used for probing + * because it has the same value as + * ATMEL flashes) + */ +#define SPI_NOR_4B_OPCODES BIT(11) /* + * Use dedicated 4byte address op codes + * to support memory size above 128Mib. + */ +#define NO_CHIP_ERASE BIT(12) /* Chip does not support chip erase */ +#define SPI_NOR_SKIP_SFDP BIT(13) /* Skip parsing of SFDP tables */ +#define USE_CLSR BIT(14) /* use CLSR command */ +#define SPI_NOR_OCTAL_READ BIT(15) /* Flash supports Octal Read */ +#define SPI_NOR_TB_SR_BIT6 BIT(16) /* + * Top/Bottom (TB) is bit 6 of + * status register. Must be used with + * SPI_NOR_HAS_TB. + */ + + /* Part specific fixup hooks. */ + const struct spi_nor_fixups *fixups; +}; + +/* Used when the "_ext_id" is two bytes at most */ +#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \ + .id = { \ + ((_jedec_id) >> 16) & 0xff, \ + ((_jedec_id) >> 8) & 0xff, \ + (_jedec_id) & 0xff, \ + ((_ext_id) >> 8) & 0xff, \ + (_ext_id) & 0xff, \ + }, \ + .id_len = (!(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))), \ + .sector_size = (_sector_size), \ + .n_sectors = (_n_sectors), \ + .page_size = 256, \ + .flags = (_flags), + +#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \ + .id = { \ + ((_jedec_id) >> 16) & 0xff, \ + ((_jedec_id) >> 8) & 0xff, \ + (_jedec_id) & 0xff, \ + ((_ext_id) >> 16) & 0xff, \ + ((_ext_id) >> 8) & 0xff, \ + (_ext_id) & 0xff, \ + }, \ + .id_len = 6, \ + .sector_size = (_sector_size), \ + .n_sectors = (_n_sectors), \ + .page_size = 256, \ + .flags = (_flags), + +#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width, _flags) \ + .sector_size = (_sector_size), \ + .n_sectors = (_n_sectors), \ + .page_size = (_page_size), \ + .addr_width = (_addr_width), \ + .flags = (_flags), + +#define S3AN_INFO(_jedec_id, _n_sectors, _page_size) \ + .id = { \ + ((_jedec_id) >> 16) & 0xff, \ + ((_jedec_id) >> 8) & 0xff, \ + (_jedec_id) & 0xff \ + }, \ + .id_len = 3, \ + .sector_size = (8*_page_size), \ + .n_sectors = (_n_sectors), \ + .page_size = _page_size, \ + .addr_width = 3, \ + .flags = SPI_NOR_NO_FR | SPI_S3AN, + +int spi_nor_write_enable(struct spi_nor *nor); +int spi_nor_write_disable(struct spi_nor *nor); +int spi_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable); +int spi_nor_write_ear(struct spi_nor *nor, u8 ear); +int spi_nor_wait_till_ready(struct spi_nor *nor); +int spi_nor_lock_and_prep(struct spi_nor *nor); +void spi_nor_unlock_and_unprep(struct spi_nor *nor); int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor); int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor); int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor); +int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr); ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len, u8 *buf); +ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len, + const u8 *buf); int spi_nor_hwcaps_read2cmd(u32 hwcaps); u8 spi_nor_convert_3to4_read(u8 opcode); @@ -33,4 +186,9 @@ int spi_nor_post_bfpt_fixups(struct spi_nor *nor, const struct sfdp_bfpt *bfpt, struct spi_nor_flash_parameter *params); +static struct spi_nor __maybe_unused *mtd_to_spi_nor(struct mtd_info *mtd) +{ + return mtd->priv; +} + #endif /* __LINUX_MTD_SPI_NOR_INTERNAL_H */ |