diff options
Diffstat (limited to 'drivers/mtd/spi-nor/spi-nor.c')
| -rw-r--r-- | drivers/mtd/spi-nor/spi-nor.c | 1704 |
1 files changed, 1267 insertions, 437 deletions
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 654bdc41fc99..1d8621d43160 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -19,6 +19,7 @@ #include <linux/mtd/mtd.h> #include <linux/of_platform.h> +#include <linux/sched/task_stack.h> #include <linux/spi/flash.h> #include <linux/mtd/spi-nor.h> @@ -39,71 +40,6 @@ #define SPI_NOR_MAX_ID_LEN 6 #define SPI_NOR_MAX_ADDR_WIDTH 4 -struct spi_nor_read_command { - u8 num_mode_clocks; - u8 num_wait_states; - u8 opcode; - enum spi_nor_protocol proto; -}; - -struct spi_nor_pp_command { - u8 opcode; - enum spi_nor_protocol proto; -}; - -enum spi_nor_read_command_index { - SNOR_CMD_READ, - SNOR_CMD_READ_FAST, - SNOR_CMD_READ_1_1_1_DTR, - - /* Dual SPI */ - SNOR_CMD_READ_1_1_2, - SNOR_CMD_READ_1_2_2, - SNOR_CMD_READ_2_2_2, - SNOR_CMD_READ_1_2_2_DTR, - - /* Quad SPI */ - SNOR_CMD_READ_1_1_4, - SNOR_CMD_READ_1_4_4, - SNOR_CMD_READ_4_4_4, - SNOR_CMD_READ_1_4_4_DTR, - - /* Octal SPI */ - SNOR_CMD_READ_1_1_8, - SNOR_CMD_READ_1_8_8, - SNOR_CMD_READ_8_8_8, - SNOR_CMD_READ_1_8_8_DTR, - - SNOR_CMD_READ_MAX -}; - -enum spi_nor_pp_command_index { - SNOR_CMD_PP, - - /* Quad SPI */ - SNOR_CMD_PP_1_1_4, - SNOR_CMD_PP_1_4_4, - SNOR_CMD_PP_4_4_4, - - /* Octal SPI */ - SNOR_CMD_PP_1_1_8, - SNOR_CMD_PP_1_8_8, - SNOR_CMD_PP_8_8_8, - - SNOR_CMD_PP_MAX -}; - -struct spi_nor_flash_parameter { - u64 size; - u32 page_size; - - struct spi_nor_hwcaps hwcaps; - struct spi_nor_read_command reads[SNOR_CMD_READ_MAX]; - struct spi_nor_pp_command page_programs[SNOR_CMD_PP_MAX]; - - int (*quad_enable)(struct spi_nor *nor); -}; - struct sfdp_parameter_header { u8 id_lsb; u8 minor; @@ -218,16 +154,26 @@ struct sfdp_bfpt { /** * struct spi_nor_fixups - SPI NOR fixup hooks + * @default_init: called after default flash parameters init. Used to tweak + * flash parameters when information provided by the flash_info + * table is incomplete or wrong. * @post_bfpt: called after the BFPT table has been parsed + * @post_sfdp: called after SFDP has been parsed (is also called for SPI NORs + * that do not support RDSFDP). Typically used to tweak various + * parameters that could not be extracted by other means (i.e. + * when information provided by the SFDP/flash_info tables are + * incomplete or wrong). * * Those hooks can be used to tweak the SPI NOR configuration when the SFDP * table is broken or not available. */ struct spi_nor_fixups { + void (*default_init)(struct spi_nor *nor); int (*post_bfpt)(struct spi_nor *nor, const struct sfdp_parameter_header *bfpt_header, const struct sfdp_bfpt *bfpt, struct spi_nor_flash_parameter *params); + void (*post_sfdp)(struct spi_nor *nor); }; struct flash_info { @@ -265,6 +211,14 @@ struct flash_info { * bit. Must be used with * SPI_NOR_HAS_LOCK. */ +#define SPI_NOR_XSR_RDY BIT(10) /* + * S3AN flashes have specific opcode to + * read the status register. + * Flags SPI_NOR_XSR_RDY and SPI_S3AN + * use the same bit as one implies the + * other, but we will get rid of + * SPI_S3AN soon. + */ #define SPI_S3AN BIT(10) /* * Xilinx Spartan 3AN In-System Flash * (MFR cannot be used for probing @@ -282,12 +236,158 @@ struct flash_info { /* Part specific fixup hooks. */ const struct spi_nor_fixups *fixups; - - int (*quad_enable)(struct spi_nor *nor); }; #define JEDEC_MFR(info) ((info)->id[0]) +/** + * spi_nor_spimem_xfer_data() - helper function to read/write data to + * flash's memory region + * @nor: pointer to 'struct spi_nor' + * @op: pointer to 'struct spi_mem_op' template for transfer + * + * Return: number of bytes transferred on success, -errno otherwise + */ +static ssize_t spi_nor_spimem_xfer_data(struct spi_nor *nor, + struct spi_mem_op *op) +{ + bool usebouncebuf = false; + void *rdbuf = NULL; + const void *buf; + int ret; + + if (op->data.dir == SPI_MEM_DATA_IN) + buf = op->data.buf.in; + else + buf = op->data.buf.out; + + if (object_is_on_stack(buf) || !virt_addr_valid(buf)) + usebouncebuf = true; + + if (usebouncebuf) { + if (op->data.nbytes > nor->bouncebuf_size) + op->data.nbytes = nor->bouncebuf_size; + + if (op->data.dir == SPI_MEM_DATA_IN) { + rdbuf = op->data.buf.in; + op->data.buf.in = nor->bouncebuf; + } else { + op->data.buf.out = nor->bouncebuf; + memcpy(nor->bouncebuf, buf, + op->data.nbytes); + } + } + + ret = spi_mem_adjust_op_size(nor->spimem, op); + if (ret) + return ret; + + ret = spi_mem_exec_op(nor->spimem, op); + if (ret) + return ret; + + if (usebouncebuf && op->data.dir == SPI_MEM_DATA_IN) + memcpy(rdbuf, nor->bouncebuf, op->data.nbytes); + + return op->data.nbytes; +} + +/** + * spi_nor_spimem_read_data() - read data from flash's memory region via + * spi-mem + * @nor: pointer to 'struct spi_nor' + * @from: offset to read from + * @len: number of bytes to read + * @buf: pointer to dst buffer + * + * Return: number of bytes read successfully, -errno otherwise + */ +static ssize_t spi_nor_spimem_read_data(struct spi_nor *nor, loff_t from, + size_t len, u8 *buf) +{ + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 1), + SPI_MEM_OP_ADDR(nor->addr_width, from, 1), + SPI_MEM_OP_DUMMY(nor->read_dummy, 1), + SPI_MEM_OP_DATA_IN(len, buf, 1)); + + /* get transfer protocols. */ + op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->read_proto); + op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->read_proto); + op.dummy.buswidth = op.addr.buswidth; + op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->read_proto); + + /* convert the dummy cycles to the number of bytes */ + op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8; + + return spi_nor_spimem_xfer_data(nor, &op); +} + +/** + * spi_nor_read_data() - read data from flash memory + * @nor: pointer to 'struct spi_nor' + * @from: offset to read from + * @len: number of bytes to read + * @buf: pointer to dst buffer + * + * Return: number of bytes read successfully, -errno otherwise + */ +static ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len, + u8 *buf) +{ + if (nor->spimem) + return spi_nor_spimem_read_data(nor, from, len, buf); + + return nor->read(nor, from, len, buf); +} + +/** + * spi_nor_spimem_write_data() - write data to flash memory via + * spi-mem + * @nor: pointer to 'struct spi_nor' + * @to: offset to write to + * @len: number of bytes to write + * @buf: pointer to src buffer + * + * Return: number of bytes written successfully, -errno otherwise + */ +static ssize_t spi_nor_spimem_write_data(struct spi_nor *nor, loff_t to, + size_t len, const u8 *buf) +{ + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 1), + SPI_MEM_OP_ADDR(nor->addr_width, to, 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(len, buf, 1)); + + op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->write_proto); + op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->write_proto); + op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->write_proto); + + if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second) + op.addr.nbytes = 0; + + return spi_nor_spimem_xfer_data(nor, &op); +} + +/** + * spi_nor_write_data() - write data to flash memory + * @nor: pointer to 'struct spi_nor' + * @to: offset to write to + * @len: number of bytes to write + * @buf: pointer to src buffer + * + * Return: number of bytes written successfully, -errno otherwise + */ +static ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len, + const u8 *buf) +{ + if (nor->spimem) + return spi_nor_spimem_write_data(nor, to, len, buf); + + return nor->write(nor, to, len, buf); +} + /* * Read the status register, returning its value in the location * Return the status register value. @@ -296,15 +396,25 @@ struct flash_info { static int read_sr(struct spi_nor *nor) { int ret; - u8 val; - ret = nor->read_reg(nor, SPINOR_OP_RDSR, &val, 1); + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, nor->bouncebuf, 1)); + + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->read_reg(nor, SPINOR_OP_RDSR, nor->bouncebuf, 1); + } + if (ret < 0) { pr_err("error %d reading SR\n", (int) ret); return ret; } - return val; + return nor->bouncebuf[0]; } /* @@ -315,15 +425,25 @@ static int read_sr(struct spi_nor *nor) static int read_fsr(struct spi_nor *nor) { int ret; - u8 val; - ret = nor->read_reg(nor, SPINOR_OP_RDFSR, &val, 1); + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDFSR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, nor->bouncebuf, 1)); + + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->read_reg(nor, SPINOR_OP_RDFSR, nor->bouncebuf, 1); + } + if (ret < 0) { pr_err("error %d reading FSR\n", ret); return ret; } - return val; + return nor->bouncebuf[0]; } /* @@ -334,15 +454,25 @@ static int read_fsr(struct spi_nor *nor) static int read_cr(struct spi_nor *nor) { int ret; - u8 val; - ret = nor->read_reg(nor, SPINOR_OP_RDCR, &val, 1); + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDCR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, nor->bouncebuf, 1)); + + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->read_reg(nor, SPINOR_OP_RDCR, nor->bouncebuf, 1); + } + if (ret < 0) { dev_err(nor->dev, "error %d reading CR\n", ret); return ret; } - return val; + return nor->bouncebuf[0]; } /* @@ -351,8 +481,18 @@ static int read_cr(struct spi_nor *nor) */ static int write_sr(struct spi_nor *nor, u8 val) { - nor->cmd_buf[0] = val; - return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1); + nor->bouncebuf[0] = val; + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, nor->bouncebuf, 1)); + + return spi_mem_exec_op(nor->spimem, &op); + } + + return nor->write_reg(nor, SPINOR_OP_WRSR, nor->bouncebuf, 1); } /* @@ -361,6 +501,16 @@ static int write_sr(struct spi_nor *nor, u8 val) */ static int write_enable(struct spi_nor *nor) { + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WREN, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_NO_DATA); + + return spi_mem_exec_op(nor->spimem, &op); + } + return nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0); } @@ -369,6 +519,16 @@ static int write_enable(struct spi_nor *nor) */ static int write_disable(struct spi_nor *nor) { + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRDI, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_NO_DATA); + + return spi_mem_exec_op(nor->spimem, &op); + } + return nor->write_reg(nor, SPINOR_OP_WRDI, NULL, 0); } @@ -439,24 +599,12 @@ static u8 spi_nor_convert_3to4_erase(u8 opcode) static void spi_nor_set_4byte_opcodes(struct spi_nor *nor) { - /* Do some manufacturer fixups first */ - switch (JEDEC_MFR(nor->info)) { - case SNOR_MFR_SPANSION: - /* No small sector erase for 4-byte command set */ - nor->erase_opcode = SPINOR_OP_SE; - nor->mtd.erasesize = nor->info->sector_size; - break; - - default: - break; - } - nor->read_opcode = spi_nor_convert_3to4_read(nor->read_opcode); nor->program_opcode = spi_nor_convert_3to4_program(nor->program_opcode); nor->erase_opcode = spi_nor_convert_3to4_erase(nor->erase_opcode); if (!spi_nor_has_uniform_erase(nor)) { - struct spi_nor_erase_map *map = &nor->erase_map; + struct spi_nor_erase_map *map = &nor->params.erase_map; struct spi_nor_erase_type *erase; int i; @@ -468,63 +616,131 @@ static void spi_nor_set_4byte_opcodes(struct spi_nor *nor) } } -/* Enable/disable 4-byte addressing mode. */ -static int set_4byte(struct spi_nor *nor, bool enable) +static int macronix_set_4byte(struct spi_nor *nor, bool enable) { - int status; - bool need_wren = false; - u8 cmd; + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(enable ? + SPINOR_OP_EN4B : + SPINOR_OP_EX4B, + 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_NO_DATA); + + return spi_mem_exec_op(nor->spimem, &op); + } - switch (JEDEC_MFR(nor->info)) { - case SNOR_MFR_ST: - case SNOR_MFR_MICRON: - /* Some Micron need WREN command; all will accept it */ - need_wren = true; - /* fall through */ - case SNOR_MFR_MACRONIX: - case SNOR_MFR_WINBOND: - if (need_wren) - write_enable(nor); + return nor->write_reg(nor, enable ? SPINOR_OP_EN4B : SPINOR_OP_EX4B, + NULL, 0); +} + +static int st_micron_set_4byte(struct spi_nor *nor, bool enable) +{ + int ret; - cmd = enable ? SPINOR_OP_EN4B : SPINOR_OP_EX4B; - status = nor->write_reg(nor, cmd, NULL, 0); - if (need_wren) - write_disable(nor); + write_enable(nor); + ret = macronix_set_4byte(nor, enable); + write_disable(nor); - if (!status && !enable && - JEDEC_MFR(nor->info) == SNOR_MFR_WINBOND) { - /* - * On Winbond W25Q256FV, leaving 4byte mode causes - * the Extended Address Register to be set to 1, so all - * 3-byte-address reads come from the second 16M. - * We must clear the register to enable normal behavior. - */ - write_enable(nor); - nor->cmd_buf[0] = 0; - nor->write_reg(nor, SPINOR_OP_WREAR, nor->cmd_buf, 1); - write_disable(nor); - } + return ret; +} - return status; - default: - /* Spansion style */ - nor->cmd_buf[0] = enable << 7; - return nor->write_reg(nor, SPINOR_OP_BRWR, nor->cmd_buf, 1); +static int spansion_set_4byte(struct spi_nor *nor, bool enable) +{ + nor->bouncebuf[0] = enable << 7; + + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_BRWR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(1, nor->bouncebuf, 1)); + + return spi_mem_exec_op(nor->spimem, &op); } + + return nor->write_reg(nor, SPINOR_OP_BRWR, nor->bouncebuf, 1); +} + +static int spi_nor_write_ear(struct spi_nor *nor, u8 ear) +{ + nor->bouncebuf[0] = ear; + + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WREAR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(1, nor->bouncebuf, 1)); + + return spi_mem_exec_op(nor->spimem, &op); + } + + return nor->write_reg(nor, SPINOR_OP_WREAR, nor->bouncebuf, 1); +} + +static int winbond_set_4byte(struct spi_nor *nor, bool enable) +{ + int ret; + + ret = macronix_set_4byte(nor, enable); + if (ret || enable) + return ret; + + /* + * On Winbond W25Q256FV, leaving 4byte mode causes the Extended Address + * Register to be set to 1, so all 3-byte-address reads come from the + * second 16M. We must clear the register to enable normal behavior. + */ + write_enable(nor); + ret = spi_nor_write_ear(nor, 0); + write_disable(nor); + + return ret; +} + +static int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr) +{ + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_XRDSR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, sr, 1)); + + return spi_mem_exec_op(nor->spimem, &op); + } + + return nor->read_reg(nor, SPINOR_OP_XRDSR, sr, 1); } static int s3an_sr_ready(struct spi_nor *nor) { int ret; - u8 val; - ret = nor->read_reg(nor, SPINOR_OP_XRDSR, &val, 1); + ret = spi_nor_xread_sr(nor, nor->bouncebuf); if (ret < 0) { dev_err(nor->dev, "error %d reading XRDSR\n", (int) ret); return ret; } - return !!(val & XSR_RDY); + return !!(nor->bouncebuf[0] & XSR_RDY); +} + +static int spi_nor_clear_sr(struct spi_nor *nor) +{ + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CLSR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_NO_DATA); + + return spi_mem_exec_op(nor->spimem, &op); + } + + return nor->write_reg(nor, SPINOR_OP_CLSR, NULL, 0); } static int spi_nor_sr_ready(struct spi_nor *nor) @@ -539,13 +755,28 @@ static int spi_nor_sr_ready(struct spi_nor *nor) else dev_err(nor->dev, "Programming Error occurred\n"); - nor->write_reg(nor, SPINOR_OP_CLSR, NULL, 0); + spi_nor_clear_sr(nor); return -EIO; } return !(sr & SR_WIP); } +static int spi_nor_clear_fsr(struct spi_nor *nor) +{ + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CLFSR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_NO_DATA); + + return spi_mem_exec_op(nor->spimem, &op); + } + + return nor->write_reg(nor, SPINOR_OP_CLFSR, NULL, 0); +} + static int spi_nor_fsr_ready(struct spi_nor *nor) { int fsr = read_fsr(nor); @@ -562,7 +793,7 @@ static int spi_nor_fsr_ready(struct spi_nor *nor) dev_err(nor->dev, "Attempted to modify a protected sector.\n"); - nor->write_reg(nor, SPINOR_OP_CLFSR, NULL, 0); + spi_nor_clear_fsr(nor); return -EIO; } @@ -630,6 +861,16 @@ static int erase_chip(struct spi_nor *nor) { dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd.size >> 10)); + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CHIP_ERASE, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_NO_DATA); + + return spi_mem_exec_op(nor->spimem, &op); + } + return nor->write_reg(nor, SPINOR_OP_CHIP_ERASE, NULL, 0); } @@ -666,10 +907,9 @@ static void spi_nor_unlock_and_unprep(struct spi_nor *nor, enum spi_nor_ops ops) * Addr can safely be unsigned int, the biggest S3AN device is smaller than * 4 MiB. */ -static loff_t spi_nor_s3an_addr_convert(struct spi_nor *nor, unsigned int addr) +static u32 s3an_convert_addr(struct spi_nor *nor, u32 addr) { - unsigned int offset; - unsigned int page; + u32 offset, page; offset = addr % nor->page_size; page = addr / nor->page_size; @@ -678,30 +918,47 @@ static loff_t spi_nor_s3an_addr_convert(struct spi_nor *nor, unsigned int addr) return page | offset; } +static u32 spi_nor_convert_addr(struct spi_nor *nor, loff_t addr) +{ + if (!nor->params.convert_addr) + return addr; + + return nor->params.convert_addr(nor, addr); +} + /* * Initiate the erasure of a single sector */ static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr) { - u8 buf[SPI_NOR_MAX_ADDR_WIDTH]; int i; - if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT) - addr = spi_nor_s3an_addr_convert(nor, addr); + addr = spi_nor_convert_addr(nor, addr); if (nor->erase) return nor->erase(nor, addr); + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(nor->erase_opcode, 1), + SPI_MEM_OP_ADDR(nor->addr_width, addr, 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_NO_DATA); + + return spi_mem_exec_op(nor->spimem, &op); + } + /* * Default implementation, if driver doesn't have a specialized HW * control */ for (i = nor->addr_width - 1; i >= 0; i--) { - buf[i] = addr & 0xff; + nor->bouncebuf[i] = addr & 0xff; addr >>= 8; } - return nor->write_reg(nor, nor->erase_opcode, buf, nor->addr_width); + return nor->write_reg(nor, nor->erase_opcode, nor->bouncebuf, + nor->addr_width); } /** @@ -876,7 +1133,7 @@ static int spi_nor_init_erase_cmd_list(struct spi_nor *nor, struct list_head *erase_list, u64 addr, u32 len) { - const struct spi_nor_erase_map *map = &nor->erase_map; + const struct spi_nor_erase_map *map = &nor->params.erase_map; const struct spi_nor_erase_type *erase, *prev_erase = NULL; struct spi_nor_erase_region *region; struct spi_nor_erase_command *cmd = NULL; @@ -1349,6 +1606,12 @@ static int stm_is_locked(struct spi_nor *nor, loff_t ofs, uint64_t len) return stm_is_locked_sr(nor, ofs, len, status); } +static const struct spi_nor_locking_ops stm_locking_ops = { + .lock = stm_lock, + .unlock = stm_unlock, + .is_locked = stm_is_locked, +}; + static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) { struct spi_nor *nor = mtd_to_spi_nor(mtd); @@ -1358,7 +1621,7 @@ static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) if (ret) return ret; - ret = nor->flash_lock(nor, ofs, len); + ret = nor->params.locking_ops->lock(nor, ofs, len); spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_UNLOCK); return ret; @@ -1373,7 +1636,7 @@ static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) if (ret) return ret; - ret = nor->flash_unlock(nor, ofs, len); + ret = nor->params.locking_ops->unlock(nor, ofs, len); spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_LOCK); return ret; @@ -1388,7 +1651,7 @@ static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) if (ret) return ret; - ret = nor->flash_is_locked(nor, ofs, len); + ret = nor->params.locking_ops->is_locked(nor, ofs, len); spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_LOCK); return ret; @@ -1406,7 +1669,18 @@ static int write_sr_cr(struct spi_nor *nor, u8 *sr_cr) write_enable(nor); - ret = nor->write_reg(nor, SPINOR_OP_WRSR, sr_cr, 2); + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(2, sr_cr, 1)); + + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->write_reg(nor, SPINOR_OP_WRSR, sr_cr, 2); + } + if (ret < 0) { dev_err(nor->dev, "error while writing configuration register\n"); @@ -1485,9 +1759,11 @@ static int macronix_quad_enable(struct spi_nor *nor) */ static int spansion_quad_enable(struct spi_nor *nor) { - u8 sr_cr[2] = {0, CR_QUAD_EN_SPAN}; + u8 *sr_cr = nor->bouncebuf; int ret; + sr_cr[0] = 0; + sr_cr[1] = CR_QUAD_EN_SPAN; ret = write_sr_cr(nor, sr_cr); if (ret) return ret; @@ -1517,7 +1793,7 @@ static int spansion_quad_enable(struct spi_nor *nor) */ static int spansion_no_read_cr_quad_enable(struct spi_nor *nor) { - u8 sr_cr[2]; + u8 *sr_cr = nor->bouncebuf; int ret; /* Keep the current value of the Status Register. */ @@ -1548,7 +1824,7 @@ static int spansion_no_read_cr_quad_enable(struct spi_nor *nor) static int spansion_read_cr_quad_enable(struct spi_nor *nor) { struct device *dev = nor->dev; - u8 sr_cr[2]; + u8 *sr_cr = nor->bouncebuf; int ret; /* Check current Quad Enable bit value. */ @@ -1585,6 +1861,36 @@ static int spansion_read_cr_quad_enable(struct spi_nor *nor) return 0; } +static int spi_nor_write_sr2(struct spi_nor *nor, u8 *sr2) +{ + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR2, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(1, sr2, 1)); + + return spi_mem_exec_op(nor->spimem, &op); + } + + return nor->write_reg(nor, SPINOR_OP_WRSR2, sr2, 1); +} + +static int spi_nor_read_sr2(struct spi_nor *nor, u8 *sr2) +{ + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR2, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, sr2, 1)); + + return spi_mem_exec_op(nor->spimem, &op); + } + + return nor->read_reg(nor, SPINOR_OP_RDSR2, sr2, 1); +} + /** * sr2_bit7_quad_enable() - set QE bit in Status Register 2. * @nor: pointer to a 'struct spi_nor' @@ -1599,22 +1905,22 @@ static int spansion_read_cr_quad_enable(struct spi_nor *nor) */ static int sr2_bit7_quad_enable(struct spi_nor *nor) { - u8 sr2; + u8 *sr2 = nor->bouncebuf; int ret; /* Check current Quad Enable bit value. */ - ret = nor->read_reg(nor, SPINOR_OP_RDSR2, &sr2, 1); + ret = spi_nor_read_sr2(nor, sr2); if (ret) return ret; - if (sr2 & SR2_QUAD_EN_BIT7) + if (*sr2 & SR2_QUAD_EN_BIT7) return 0; /* Update the Quad Enable bit. */ - sr2 |= SR2_QUAD_EN_BIT7; + *sr2 |= SR2_QUAD_EN_BIT7; write_enable(nor); - ret = nor->write_reg(nor, SPINOR_OP_WRSR2, &sr2, 1); + ret = spi_nor_write_sr2(nor, sr2); if (ret < 0) { dev_err(nor->dev, "error while writing status register 2\n"); return -EINVAL; @@ -1627,8 +1933,8 @@ static int sr2_bit7_quad_enable(struct spi_nor *nor) } /* Read back and check it. */ - ret = nor->read_reg(nor, SPINOR_OP_RDSR2, &sr2, 1); - if (!(ret > 0 && (sr2 & SR2_QUAD_EN_BIT7))) { + ret = spi_nor_read_sr2(nor, sr2); + if (!(ret > 0 && (*sr2 & SR2_QUAD_EN_BIT7))) { dev_err(nor->dev, "SR2 Quad bit not set\n"); return -EINVAL; } @@ -1687,7 +1993,7 @@ static int spi_nor_spansion_clear_sr_bp(struct spi_nor *nor) { int ret; u8 mask = SR_BP2 | SR_BP1 | SR_BP0; - u8 sr_cr[2] = {0}; + u8 *sr_cr = nor->bouncebuf; /* Check current Quad Enable bit value. */ ret = read_cr(nor); @@ -1822,6 +2128,21 @@ static struct spi_nor_fixups mx25l25635_fixups = { .post_bfpt = mx25l25635_post_bfpt_fixups, }; +static void gd25q256_default_init(struct spi_nor *nor) +{ + /* + * Some manufacturer like GigaDevice may use different + * bit to set QE on different memories, so the MFR can't + * indicate the quad_enable method for this case, we need + * to set it in the default_init fixup hook. + */ + nor->params.quad_enable = macronix_quad_enable; +} + +static struct spi_nor_fixups gd25q256_fixups = { + .default_init = gd25q256_default_init, +}; + /* NOTE: double check command sets and memory organization when you add * more nor chips. This current list focusses on newer chips, which * have been converging on command sets which including JEDEC ID. @@ -1914,7 +2235,7 @@ static const struct flash_info spi_nor_ids[] = { "gd25q256", INFO(0xc84019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) - .quad_enable = macronix_quad_enable, + .fixups = &gd25q256_fixups, }, /* Intel/Numonyx -- xxxs33b */ @@ -1988,13 +2309,16 @@ static const struct flash_info spi_nor_ids[] = { { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) }, { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "n25q256ax1", INFO(0x20bb19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) }, - { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, { "n25q00a", INFO(0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, { "mt25ql02g", INFO(0x20ba22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, + { "mt25qu512a (n25q512a)", INFO(0x20bb20, 0, 64 * 1024, 1024, + SECT_4K | USE_FSR | SPI_NOR_DUAL_READ | + SPI_NOR_QUAD_READ | + SPI_NOR_4B_OPCODES) }, { "mt25qu02g", INFO(0x20bb22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, /* Micron */ @@ -2003,6 +2327,9 @@ static const struct flash_info spi_nor_ids[] = { SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES) }, + { "mt35xu02g", INFO(0x2c5b1c, 0, 128 * 1024, 2048, + SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ | + SPI_NOR_4B_OPCODES) }, /* PMC */ { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) }, @@ -2022,7 +2349,7 @@ static const struct flash_info spi_nor_ids[] = { { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) }, { "s25fl512s", INFO6(0x010220, 0x4d0080, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | - SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | USE_CLSR) }, + SPI_NOR_HAS_LOCK | USE_CLSR) }, { "s25fs512s", INFO6(0x010220, 0x4d0081, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) }, { "s70fl01gs", INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) }, { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) }, @@ -2060,6 +2387,8 @@ static const struct flash_info spi_nor_ids[] = { { "sst25wf040b", INFO(0x621613, 0, 64 * 1024, 8, SECT_4K) }, { "sst25wf040", INFO(0xbf2504, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) }, { "sst25wf080", INFO(0xbf2505, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) }, + { "sst26wf016b", INFO(0xbf2651, 0, 64 * 1024, 32, SECT_4K | + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, /* ST Microelectronics -- newer production may have feature updates */ @@ -2151,6 +2480,8 @@ static const struct flash_info spi_nor_ids[] = { { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) }, { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) }, { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024, SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) }, @@ -2177,10 +2508,21 @@ static const struct flash_info spi_nor_ids[] = { static const struct flash_info *spi_nor_read_id(struct spi_nor *nor) { int tmp; - u8 id[SPI_NOR_MAX_ID_LEN]; + u8 *id = nor->bouncebuf; const struct flash_info *info; - tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN); + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDID, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(SPI_NOR_MAX_ID_LEN, id, 1)); + + tmp = spi_mem_exec_op(nor->spimem, &op); + } else { + tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, + SPI_NOR_MAX_ID_LEN); + } if (tmp < 0) { dev_err(nor->dev, "error %d reading JEDEC ID\n", tmp); return ERR_PTR(tmp); @@ -2213,10 +2555,9 @@ static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len, while (len) { loff_t addr = from; - if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT) - addr = spi_nor_s3an_addr_convert(nor, addr); + addr = spi_nor_convert_addr(nor, addr); - ret = nor->read(nor, addr, len, buf); + ret = spi_nor_read_data(nor, addr, len, buf); if (ret == 0) { /* We shouldn't see 0-length reads */ ret = -EIO; @@ -2261,7 +2602,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, nor->program_opcode = SPINOR_OP_BP; /* write one byte. */ - ret = nor->write(nor, to, 1, buf); + ret = spi_nor_write_data(nor, to, 1, buf); if (ret < 0) goto sst_write_err; WARN(ret != 1, "While writing 1 byte written %i bytes\n", @@ -2277,7 +2618,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, nor->program_opcode = SPINOR_OP_AAI_WP; /* write two bytes. */ - ret = nor->write(nor, to, 2, buf + actual); + ret = spi_nor_write_data(nor, to, 2, buf + actual); if (ret < 0) goto sst_write_err; WARN(ret != 2, "While writing 2 bytes written %i bytes\n", @@ -2300,7 +2641,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, write_enable(nor); nor->program_opcode = SPINOR_OP_BP; - ret = nor->write(nor, to, 1, buf + actual); + ret = spi_nor_write_data(nor, to, 1, buf + actual); if (ret < 0) goto sst_write_err; WARN(ret != 1, "While writing 1 byte written %i bytes\n", @@ -2358,11 +2699,10 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len, page_remain = min_t(size_t, nor->page_size - page_offset, len - i); - if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT) - addr = spi_nor_s3an_addr_convert(nor, addr); + addr = spi_nor_convert_addr(nor, addr); write_enable(nor); - ret = nor->write(nor, addr, page_remain, buf + i); + ret = spi_nor_write_data(nor, addr, page_remain, buf + i); if (ret < 0) goto write_err; written = ret; @@ -2381,8 +2721,10 @@ write_err: static int spi_nor_check(struct spi_nor *nor) { - if (!nor->dev || !nor->read || !nor->write || - !nor->read_reg || !nor->write_reg) { + if (!nor->dev || + (!nor->spimem && + (!nor->read || !nor->write || !nor->read_reg || + !nor->write_reg))) { pr_err("spi-nor: please fill all the necessary fields!\n"); return -EINVAL; } @@ -2390,12 +2732,12 @@ static int spi_nor_check(struct spi_nor *nor) return 0; } -static int s3an_nor_scan(struct spi_nor *nor) +static int s3an_nor_setup(struct spi_nor *nor, + const struct spi_nor_hwcaps *hwcaps) { int ret; - u8 val; - ret = nor->read_reg(nor, SPINOR_OP_XRDSR, &val, 1); + ret = spi_nor_xread_sr(nor, nor->bouncebuf); if (ret < 0) { dev_err(nor->dev, "error %d reading XRDSR\n", (int) ret); return ret; @@ -2417,7 +2759,7 @@ static int s3an_nor_scan(struct spi_nor *nor) * The current addressing mode can be read from the XRDSR register * and should not be changed, because is a destructive operation. */ - if (val & XSR_PAGESIZE) { + if (nor->bouncebuf[0] & XSR_PAGESIZE) { /* Flash in Power of 2 mode */ nor->page_size = (nor->page_size == 264) ? 256 : 512; nor->mtd.writebufsize = nor->page_size; @@ -2425,7 +2767,8 @@ static int s3an_nor_scan(struct spi_nor *nor) nor->mtd.erasesize = 8 * nor->page_size; } else { /* Flash in Default addressing mode */ - nor->flags |= SNOR_F_S3AN_ADDR_DEFAULT; + nor->params.convert_addr = s3an_convert_addr; + nor->mtd.erasesize = nor->info->sector_size; } return 0; @@ -2525,11 +2868,11 @@ static int spi_nor_read_raw(struct spi_nor *nor, u32 addr, size_t len, u8 *buf) int ret; while (len) { - ret = nor->read(nor, addr, len, buf); - if (!ret || ret > len) - return -EIO; + ret = spi_nor_read_data(nor, addr, len, buf); if (ret < 0) return ret; + if (!ret || ret > len) + return -EIO; buf += ret; addr += ret; @@ -2575,6 +2918,126 @@ static int spi_nor_read_sfdp(struct spi_nor *nor, u32 addr, } /** + * spi_nor_spimem_check_op - check if the operation is supported + * by controller + *@nor: pointer to a 'struct spi_nor' + *@op: pointer to op template to be checked + * + * Returns 0 if operation is supported, -ENOTSUPP otherwise. + */ +static int spi_nor_spimem_check_op(struct spi_nor *nor, + struct spi_mem_op *op) +{ + /* + * First test with 4 address bytes. The opcode itself might + * be a 3B addressing opcode but we don't care, because + * SPI controller implementation should not check the opcode, + * but just the sequence. + */ + op->addr.nbytes = 4; + if (!spi_mem_supports_op(nor->spimem, op)) { + if (nor->mtd.size > SZ_16M) + return -ENOTSUPP; + + /* If flash size <= 16MB, 3 address bytes are sufficient */ + op->addr.nbytes = 3; + if (!spi_mem_supports_op(nor->spimem, op)) + return -ENOTSUPP; + } + + return 0; +} + +/** + * spi_nor_spimem_check_readop - check if the read op is supported + * by controller + *@nor: pointer to a 'struct spi_nor' + *@read: pointer to op template to be checked + * + * Returns 0 if operation is supported, -ENOTSUPP otherwise. + */ +static int spi_nor_spimem_check_readop(struct spi_nor *nor, + const struct spi_nor_read_command *read) +{ + struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(read->opcode, 1), + SPI_MEM_OP_ADDR(3, 0, 1), + SPI_MEM_OP_DUMMY(0, 1), + SPI_MEM_OP_DATA_IN(0, NULL, 1)); + + op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(read->proto); + op.addr.buswidth = spi_nor_get_protocol_addr_nbits(read->proto); + op.data.buswidth = spi_nor_get_protocol_data_nbits(read->proto); + op.dummy.buswidth = op.addr.buswidth; + op.dummy.nbytes = (read->num_mode_clocks + read->num_wait_states) * + op.dummy.buswidth / 8; + + return spi_nor_spimem_check_op(nor, &op); +} + +/** + * spi_nor_spimem_check_pp - check if the page program op is supported + * by controller + *@nor: pointer to a 'struct spi_nor' + *@pp: pointer to op template to be checked + * + * Returns 0 if operation is supported, -ENOTSUPP otherwise. + */ +static int spi_nor_spimem_check_pp(struct spi_nor *nor, + const struct spi_nor_pp_command *pp) +{ + struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(pp->opcode, 1), + SPI_MEM_OP_ADDR(3, 0, 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(0, NULL, 1)); + + op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(pp->proto); + op.addr.buswidth = spi_nor_get_protocol_addr_nbits(pp->proto); + op.data.buswidth = spi_nor_get_protocol_data_nbits(pp->proto); + + return spi_nor_spimem_check_op(nor, &op); +} + +/** + * spi_nor_spimem_adjust_hwcaps - Find optimal Read/Write protocol + * based on SPI controller capabilities + * @nor: pointer to a 'struct spi_nor' + * @hwcaps: pointer to resulting capabilities after adjusting + * according to controller and flash's capability + */ +static void +spi_nor_spimem_adjust_hwcaps(struct spi_nor *nor, u32 *hwcaps) +{ + struct spi_nor_flash_parameter *params = &nor->params; + unsigned int cap; + + /* DTR modes are not supported yet, mask them all. */ + *hwcaps &= ~SNOR_HWCAPS_DTR; + + /* X-X-X modes are not supported yet, mask them all. */ + *hwcaps &= ~SNOR_HWCAPS_X_X_X; + + for (cap = 0; cap < sizeof(*hwcaps) * BITS_PER_BYTE; cap++) { + int rdidx, ppidx; + + if (!(*hwcaps & BIT(cap))) + continue; + + rdidx = spi_nor_hwcaps_read2cmd(BIT(cap)); + if (rdidx >= 0 && + spi_nor_spimem_check_readop(nor, ¶ms->reads[rdidx])) + *hwcaps &= ~BIT(cap); + + ppidx = spi_nor_hwcaps_pp2cmd(BIT(cap)); + if (ppidx < 0) + continue; + + if (spi_nor_spimem_check_pp(nor, + ¶ms->page_programs[ppidx])) + *hwcaps &= ~BIT(cap); + } +} + +/** * spi_nor_read_sfdp_dma_unsafe() - read Serial Flash Discoverable Parameters. * @nor: pointer to a 'struct spi_nor' * @addr: offset in the SFDP area to start reading data from @@ -2892,7 +3355,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor, const struct sfdp_parameter_header *bfpt_header, struct spi_nor_flash_parameter *params) { - struct spi_nor_erase_map *map = &nor->erase_map; + struct spi_nor_erase_map *map = ¶ms->erase_map; struct spi_nor_erase_type *erase_type = map->erase_type; struct sfdp_bfpt bfpt; size_t len; @@ -2973,7 +3436,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor, * Erase Types defined in the bfpt table. */ erase_mask = 0; - memset(&nor->erase_map, 0, sizeof(nor->erase_map)); + memset(¶ms->erase_map, 0, sizeof(params->erase_map)); for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_erases); i++) { const struct sfdp_bfpt_erase *er = &sfdp_bfpt_erases[i]; u32 erasesize; @@ -3248,14 +3711,18 @@ spi_nor_region_check_overlay(struct spi_nor_erase_region *region, /** * spi_nor_init_non_uniform_erase_map() - initialize the non-uniform erase map * @nor: pointer to a 'struct spi_nor' + * @params: pointer to a duplicate 'struct spi_nor_flash_parameter' that is + * used for storing SFDP parsed data * @smpt: pointer to the sector map parameter table * * Return: 0 on success, -errno otherwise. */ -static int spi_nor_init_non_uniform_erase_map(struct spi_nor *nor, - const u32 *smpt) +static int +spi_nor_init_non_uniform_erase_map(struct spi_nor *nor, + struct spi_nor_flash_parameter *params, + const u32 *smpt) { - struct spi_nor_erase_map *map = &nor->erase_map; + struct spi_nor_erase_map *map = ¶ms->erase_map; struct spi_nor_erase_type *erase = map->erase_type; struct spi_nor_erase_region *region; u64 offset; @@ -3334,6 +3801,8 @@ static int spi_nor_init_non_uniform_erase_map(struct spi_nor *nor, * spi_nor_parse_smpt() - parse Sector Map Parameter Table * @nor: pointer to a 'struct spi_nor' * @smpt_header: sector map parameter table header + * @params: pointer to a duplicate 'struct spi_nor_flash_parameter' + * that is used for storing SFDP parsed data * * This table is optional, but when available, we parse it to identify the * location and size of sectors within the main data array of the flash memory @@ -3342,7 +3811,8 @@ static int spi_nor_init_non_uniform_erase_map(struct spi_nor *nor, * Return: 0 on success, -errno otherwise. */ static int spi_nor_parse_smpt(struct spi_nor *nor, - const struct sfdp_parameter_header *smpt_header) + const struct sfdp_parameter_header *smpt_header, + struct spi_nor_flash_parameter *params) { const u32 *sector_map; u32 *smpt; @@ -3371,11 +3841,11 @@ static int spi_nor_parse_smpt(struct spi_nor *nor, goto out; } - ret = spi_nor_init_non_uniform_erase_map(nor, sector_map); + ret = spi_nor_init_non_uniform_erase_map(nor, params, sector_map); if (ret) goto out; - spi_nor_regions_sort_erase_types(&nor->erase_map); + spi_nor_regions_sort_erase_types(¶ms->erase_map); /* fall through */ out: kfree(smpt); @@ -3431,7 +3901,7 @@ static int spi_nor_parse_4bait(struct spi_nor *nor, { 0u /* not used */, BIT(12) }, }; struct spi_nor_pp_command *params_pp = params->page_programs; - struct spi_nor_erase_map *map = &nor->erase_map; + struct spi_nor_erase_map *map = ¶ms->erase_map; struct spi_nor_erase_type *erase_type = map->erase_type; u32 *dwords; size_t len; @@ -3453,7 +3923,7 @@ static int spi_nor_parse_4bait(struct spi_nor *nor, addr = SFDP_PARAM_HEADER_PTP(param_header); ret = spi_nor_read_sfdp(nor, addr, len, dwords); if (ret) - return ret; + goto out; /* Fix endianness of the 4BAIT DWORDs. */ for (i = 0; i < SFDP_4BAIT_DWORD_MAX; i++) @@ -3661,7 +4131,7 @@ static int spi_nor_parse_sfdp(struct spi_nor *nor, switch (SFDP_PARAM_HEADER_ID(param_header)) { case SFDP_SECTOR_MAP_ID: - err = spi_nor_parse_smpt(nor, param_header); + err = spi_nor_parse_smpt(nor, param_header, params); break; case SFDP_4BAIT_ID: @@ -3690,133 +4160,7 @@ exit: return err; } -static int spi_nor_init_params(struct spi_nor *nor, - struct spi_nor_flash_parameter *params) -{ - struct spi_nor_erase_map *map = &nor->erase_map; - const struct flash_info *info = nor->info; - u8 i, erase_mask; - - /* Set legacy flash parameters as default. */ - memset(params, 0, sizeof(*params)); - - /* Set SPI NOR sizes. */ - params->size = (u64)info->sector_size * info->n_sectors; - params->page_size = info->page_size; - - /* (Fast) Read settings. */ - params->hwcaps.mask |= SNOR_HWCAPS_READ; - spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ], - 0, 0, SPINOR_OP_READ, - SNOR_PROTO_1_1_1); - - if (!(info->flags & SPI_NOR_NO_FR)) { - params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST; - spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_FAST], - 0, 8, SPINOR_OP_READ_FAST, - SNOR_PROTO_1_1_1); - } - - if (info->flags & SPI_NOR_DUAL_READ) { - params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2; - spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_2], - 0, 8, SPINOR_OP_READ_1_1_2, - SNOR_PROTO_1_1_2); - } - - if (info->flags & SPI_NOR_QUAD_READ) { - params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4; - spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_4], - 0, 8, SPINOR_OP_READ_1_1_4, - SNOR_PROTO_1_1_4); - } - - if (info->flags & SPI_NOR_OCTAL_READ) { - params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8; - spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_8], - 0, 8, SPINOR_OP_READ_1_1_8, - SNOR_PROTO_1_1_8); - } - - /* Page Program settings. */ - params->hwcaps.mask |= SNOR_HWCAPS_PP; - spi_nor_set_pp_settings(¶ms->page_programs[SNOR_CMD_PP], - SPINOR_OP_PP, SNOR_PROTO_1_1_1); - - /* - * Sector Erase settings. Sort Erase Types in ascending order, with the - * smallest erase size starting at BIT(0). - */ - erase_mask = 0; - i = 0; - if (info->flags & SECT_4K_PMC) { - erase_mask |= BIT(i); - spi_nor_set_erase_type(&map->erase_type[i], 4096u, - SPINOR_OP_BE_4K_PMC); - i++; - } else if (info->flags & SECT_4K) { - erase_mask |= BIT(i); - spi_nor_set_erase_type(&map->erase_type[i], 4096u, - SPINOR_OP_BE_4K); - i++; - } - erase_mask |= BIT(i); - spi_nor_set_erase_type(&map->erase_type[i], info->sector_size, - SPINOR_OP_SE); - spi_nor_init_uniform_erase_map(map, erase_mask, params->size); - - /* Select the procedure to set the Quad Enable bit. */ - if (params->hwcaps.mask & (SNOR_HWCAPS_READ_QUAD | - SNOR_HWCAPS_PP_QUAD)) { - switch (JEDEC_MFR(info)) { - case SNOR_MFR_MACRONIX: - params->quad_enable = macronix_quad_enable; - break; - - case SNOR_MFR_ST: - case SNOR_MFR_MICRON: - break; - - default: - /* Kept only for backward compatibility purpose. */ - params->quad_enable = spansion_quad_enable; - break; - } - - /* - * Some manufacturer like GigaDevice may use different - * bit to set QE on different memories, so the MFR can't - * indicate the quad_enable method for this case, we need - * set it in flash info list. - */ - if (info->quad_enable) - params->quad_enable = info->quad_enable; - } - - if ((info->flags & (SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)) && - !(info->flags & SPI_NOR_SKIP_SFDP)) { - struct spi_nor_flash_parameter sfdp_params; - struct spi_nor_erase_map prev_map; - - memcpy(&sfdp_params, params, sizeof(sfdp_params)); - memcpy(&prev_map, &nor->erase_map, sizeof(prev_map)); - - if (spi_nor_parse_sfdp(nor, &sfdp_params)) { - nor->addr_width = 0; - nor->flags &= ~SNOR_F_4B_OPCODES; - /* restore previous erase map */ - memcpy(&nor->erase_map, &prev_map, - sizeof(nor->erase_map)); - } else { - memcpy(params, &sfdp_params, sizeof(*params)); - } - } - - return 0; -} - static int spi_nor_select_read(struct spi_nor *nor, - const struct spi_nor_flash_parameter *params, u32 shared_hwcaps) { int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_READ_MASK) - 1; @@ -3829,7 +4173,7 @@ static int spi_nor_select_read(struct spi_nor *nor, if (cmd < 0) return -EINVAL; - read = ¶ms->reads[cmd]; + read = &nor->params.reads[cmd]; nor->read_opcode = read->opcode; nor->read_proto = read->proto; @@ -3848,7 +4192,6 @@ static int spi_nor_select_read(struct spi_nor *nor, } static int spi_nor_select_pp(struct spi_nor *nor, - const struct spi_nor_flash_parameter *params, u32 shared_hwcaps) { int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_PP_MASK) - 1; @@ -3861,7 +4204,7 @@ static int spi_nor_select_pp(struct spi_nor *nor, if (cmd < 0) return -EINVAL; - pp = ¶ms->page_programs[cmd]; + pp = &nor->params.page_programs[cmd]; nor->program_opcode = pp->opcode; nor->write_proto = pp->proto; return 0; @@ -3920,11 +4263,12 @@ spi_nor_select_uniform_erase(struct spi_nor_erase_map *map, return erase; } -static int spi_nor_select_erase(struct spi_nor *nor, u32 wanted_size) +static int spi_nor_select_erase(struct spi_nor *nor) { - struct spi_nor_erase_map *map = &nor->erase_map; + struct spi_nor_erase_map *map = &nor->params.erase_map; const struct spi_nor_erase_type *erase = NULL; struct mtd_info *mtd = &nor->mtd; + u32 wanted_size = nor->info->sector_size; int i; /* @@ -3967,12 +4311,11 @@ static int spi_nor_select_erase(struct spi_nor *nor, u32 wanted_size) return 0; } -static int spi_nor_setup(struct spi_nor *nor, - const struct spi_nor_flash_parameter *params, - const struct spi_nor_hwcaps *hwcaps) +static int spi_nor_default_setup(struct spi_nor *nor, + const struct spi_nor_hwcaps *hwcaps) { + struct spi_nor_flash_parameter *params = &nor->params; u32 ignored_mask, shared_mask; - bool enable_quad_io; int err; /* @@ -3981,20 +4324,29 @@ static int spi_nor_setup(struct spi_nor *nor, */ shared_mask = hwcaps->mask & params->hwcaps.mask; - /* SPI n-n-n protocols are not supported yet. */ - ignored_mask = (SNOR_HWCAPS_READ_2_2_2 | - SNOR_HWCAPS_READ_4_4_4 | - SNOR_HWCAPS_READ_8_8_8 | - SNOR_HWCAPS_PP_4_4_4 | - SNOR_HWCAPS_PP_8_8_8); - if (shared_mask & ignored_mask) { - dev_dbg(nor->dev, - "SPI n-n-n protocols are not supported yet.\n"); - shared_mask &= ~ignored_mask; + if (nor->spimem) { + /* + * When called from spi_nor_probe(), all caps are set and we + * need to discard some of them based on what the SPI + * controller actually supports (using spi_mem_supports_op()). + */ + spi_nor_spimem_adjust_hwcaps(nor, &shared_mask); + } else { + /* + * SPI n-n-n protocols are not supported when the SPI + * controller directly implements the spi_nor interface. + * Yet another reason to switch to spi-mem. + */ + ignored_mask = SNOR_HWCAPS_X_X_X; + if (shared_mask & ignored_mask) { + dev_dbg(nor->dev, + "SPI n-n-n protocols are not supported.\n"); + shared_mask &= ~ignored_mask; + } } /* Select the (Fast) Read command. */ - err = spi_nor_select_read(nor, params, shared_mask); + err = spi_nor_select_read(nor, shared_mask); if (err) { dev_err(nor->dev, "can't select read settings supported by both the SPI controller and memory.\n"); @@ -4002,7 +4354,7 @@ static int spi_nor_setup(struct spi_nor *nor, } /* Select the Page Program command. */ - err = spi_nor_select_pp(nor, params, shared_mask); + err = spi_nor_select_pp(nor, shared_mask); if (err) { dev_err(nor->dev, "can't select write settings supported by both the SPI controller and memory.\n"); @@ -4010,30 +4362,325 @@ static int spi_nor_setup(struct spi_nor *nor, } /* Select the Sector Erase command. */ - err = spi_nor_select_erase(nor, nor->info->sector_size); + err = spi_nor_select_erase(nor); if (err) { dev_err(nor->dev, "can't select erase settings supported by both the SPI controller and memory.\n"); return err; } - /* Enable Quad I/O if needed. */ - enable_quad_io = (spi_nor_get_protocol_width(nor->read_proto) == 4 || - spi_nor_get_protocol_width(nor->write_proto) == 4); - if (enable_quad_io && params->quad_enable) - nor->quad_enable = params->quad_enable; - else - nor->quad_enable = NULL; - return 0; } +static int spi_nor_setup(struct spi_nor *nor, + const struct spi_nor_hwcaps *hwcaps) +{ + if (!nor->params.setup) + return 0; + + return nor->params.setup(nor, hwcaps); +} + +static void macronix_set_default_init(struct spi_nor *nor) +{ + nor->params.quad_enable = macronix_quad_enable; + nor->params.set_4byte = macronix_set_4byte; +} + +static void st_micron_set_default_init(struct spi_nor *nor) +{ + nor->flags |= SNOR_F_HAS_LOCK; + nor->params.quad_enable = NULL; + nor->params.set_4byte = st_micron_set_4byte; +} + +static void winbond_set_default_init(struct spi_nor *nor) +{ + nor->params.set_4byte = winbond_set_4byte; +} + +/** + * spi_nor_manufacturer_init_params() - Initialize the flash's parameters and + * settings based on MFR register and ->default_init() hook. + * @nor: pointer to a 'struct spi-nor'. + */ +static void spi_nor_manufacturer_init_params(struct spi_nor *nor) +{ + /* Init flash parameters based on MFR */ + switch (JEDEC_MFR(nor->info)) { + case SNOR_MFR_MACRONIX: + macronix_set_default_init(nor); + break; + + case SNOR_MFR_ST: + case SNOR_MFR_MICRON: + st_micron_set_default_init(nor); + break; + + case SNOR_MFR_WINBOND: + winbond_set_default_init(nor); + break; + + default: + break; + } + + if (nor->info->fixups && nor->info->fixups->default_init) + nor->info->fixups->default_init(nor); +} + +/** + * spi_nor_sfdp_init_params() - Initialize the flash's parameters and settings + * based on JESD216 SFDP standard. + * @nor: pointer to a 'struct spi-nor'. + * + * The method has a roll-back mechanism: in case the SFDP parsing fails, the + * legacy flash parameters and settings will be restored. + */ +static void spi_nor_sfdp_init_params(struct spi_nor *nor) +{ + struct spi_nor_flash_parameter sfdp_params; + + memcpy(&sfdp_params, &nor->params, sizeof(sfdp_params)); + + if (spi_nor_parse_sfdp(nor, &sfdp_params)) { + nor->addr_width = 0; + nor->flags &= ~SNOR_F_4B_OPCODES; + } else { + memcpy(&nor->params, &sfdp_params, sizeof(nor->params)); + } +} + +/** + * spi_nor_info_init_params() - Initialize the flash's parameters and settings + * based on nor->info data. + * @nor: pointer to a 'struct spi-nor'. + */ +static void spi_nor_info_init_params(struct spi_nor *nor) +{ + struct spi_nor_flash_parameter *params = &nor->params; + struct spi_nor_erase_map *map = ¶ms->erase_map; + const struct flash_info *info = nor->info; + struct device_node *np = spi_nor_get_flash_node(nor); + u8 i, erase_mask; + + /* Initialize legacy flash parameters and settings. */ + params->quad_enable = spansion_quad_enable; + params->set_4byte = spansion_set_4byte; + params->setup = spi_nor_default_setup; + + /* Set SPI NOR sizes. */ + params->size = (u64)info->sector_size * info->n_sectors; + params->page_size = info->page_size; + + if (!(info->flags & SPI_NOR_NO_FR)) { + /* Default to Fast Read for DT and non-DT platform devices. */ + params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST; + + /* Mask out Fast Read if not requested at DT instantiation. */ + if (np && !of_property_read_bool(np, "m25p,fast-read")) + params->hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST; + } + + /* (Fast) Read settings. */ + params->hwcaps.mask |= SNOR_HWCAPS_READ; + spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ], + 0, 0, SPINOR_OP_READ, + SNOR_PROTO_1_1_1); + + if (params->hwcaps.mask & SNOR_HWCAPS_READ_FAST) + spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_FAST], + 0, 8, SPINOR_OP_READ_FAST, + SNOR_PROTO_1_1_1); + + if (info->flags & SPI_NOR_DUAL_READ) { + params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2; + spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_2], + 0, 8, SPINOR_OP_READ_1_1_2, + SNOR_PROTO_1_1_2); + } + + if (info->flags & SPI_NOR_QUAD_READ) { + params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4; + spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_4], + 0, 8, SPINOR_OP_READ_1_1_4, + SNOR_PROTO_1_1_4); + } + + if (info->flags & SPI_NOR_OCTAL_READ) { + params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8; + spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_8], + 0, 8, SPINOR_OP_READ_1_1_8, + SNOR_PROTO_1_1_8); + } + + /* Page Program settings. */ + params->hwcaps.mask |= SNOR_HWCAPS_PP; + spi_nor_set_pp_settings(¶ms->page_programs[SNOR_CMD_PP], + SPINOR_OP_PP, SNOR_PROTO_1_1_1); + + /* + * Sector Erase settings. Sort Erase Types in ascending order, with the + * smallest erase size starting at BIT(0). + */ + erase_mask = 0; + i = 0; + if (info->flags & SECT_4K_PMC) { + erase_mask |= BIT(i); + spi_nor_set_erase_type(&map->erase_type[i], 4096u, + SPINOR_OP_BE_4K_PMC); + i++; + } else if (info->flags & SECT_4K) { + erase_mask |= BIT(i); + spi_nor_set_erase_type(&map->erase_type[i], 4096u, + SPINOR_OP_BE_4K); + i++; + } + erase_mask |= BIT(i); + spi_nor_set_erase_type(&map->erase_type[i], info->sector_size, + SPINOR_OP_SE); + spi_nor_init_uniform_erase_map(map, erase_mask, params->size); +} + +static void spansion_post_sfdp_fixups(struct spi_nor *nor) +{ + struct mtd_info *mtd = &nor->mtd; + + if (mtd->size <= SZ_16M) + return; + + nor->flags |= SNOR_F_4B_OPCODES; + /* No small sector erase for 4-byte command set */ + nor->erase_opcode = SPINOR_OP_SE; + nor->mtd.erasesize = nor->info->sector_size; +} + +static void s3an_post_sfdp_fixups(struct spi_nor *nor) +{ + nor->params.setup = s3an_nor_setup; +} + +/** + * spi_nor_post_sfdp_fixups() - Updates the flash's parameters and settings + * after SFDP has been parsed (is also called for SPI NORs that do not + * support RDSFDP). + * @nor: pointer to a 'struct spi_nor' + * + * Typically used to tweak various parameters that could not be extracted by + * other means (i.e. when information provided by the SFDP/flash_info tables + * are incomplete or wrong). + */ +static void spi_nor_post_sfdp_fixups(struct spi_nor *nor) +{ + switch (JEDEC_MFR(nor->info)) { + case SNOR_MFR_SPANSION: + spansion_post_sfdp_fixups(nor); + break; + + default: + break; + } + + if (nor->info->flags & SPI_S3AN) + s3an_post_sfdp_fixups(nor); + + if (nor->info->fixups && nor->info->fixups->post_sfdp) + nor->info->fixups->post_sfdp(nor); +} + +/** + * spi_nor_late_init_params() - Late initialization of default flash parameters. + * @nor: pointer to a 'struct spi_nor' + * + * Used to set default flash parameters and settings when the ->default_init() + * hook or the SFDP parser let voids. + */ +static void spi_nor_late_init_params(struct spi_nor *nor) +{ + /* + * NOR protection support. When locking_ops are not provided, we pick + * the default ones. + */ + if (nor->flags & SNOR_F_HAS_LOCK && !nor->params.locking_ops) + nor->params.locking_ops = &stm_locking_ops; +} + +/** + * spi_nor_init_params() - Initialize the flash's parameters and settings. + * @nor: pointer to a 'struct spi-nor'. + * + * The flash parameters and settings are initialized based on a sequence of + * calls that are ordered by priority: + * + * 1/ Default flash parameters initialization. The initializations are done + * based on nor->info data: + * spi_nor_info_init_params() + * + * which can be overwritten by: + * 2/ Manufacturer flash parameters initialization. The initializations are + * done based on MFR register, or when the decisions can not be done solely + * based on MFR, by using specific flash_info tweeks, ->default_init(): + * spi_nor_manufacturer_init_params() + * + * which can be overwritten by: + * 3/ SFDP flash parameters initialization. JESD216 SFDP is a standard and + * should be more accurate that the above. + * spi_nor_sfdp_init_params() + * + * Please note that there is a ->post_bfpt() fixup hook that can overwrite + * the flash parameters and settings immediately after parsing the Basic + * Flash Parameter Table. + * + * which can be overwritten by: + * 4/ Post SFDP flash parameters initialization. Used to tweak various + * parameters that could not be extracted by other means (i.e. when + * information provided by the SFDP/flash_info tables are incomplete or + * wrong). + * spi_nor_post_sfdp_fixups() + * + * 5/ Late default flash parameters initialization, used when the + * ->default_init() hook or the SFDP parser do not set specific params. + * spi_nor_late_init_params() + */ +static void spi_nor_init_params(struct spi_nor *nor) +{ + spi_nor_info_init_params(nor); + + spi_nor_manufacturer_init_params(nor); + + if ((nor->info->flags & (SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)) && + !(nor->info->flags & SPI_NOR_SKIP_SFDP)) + spi_nor_sfdp_init_params(nor); + + spi_nor_post_sfdp_fixups(nor); + + spi_nor_late_init_params(nor); +} + +/** + * spi_nor_quad_enable() - enable Quad I/O if needed. + * @nor: pointer to a 'struct spi_nor' + * + * Return: 0 on success, -errno otherwise. + */ +static int spi_nor_quad_enable(struct spi_nor *nor) +{ + if (!nor->params.quad_enable) + return 0; + + if (!(spi_nor_get_protocol_width(nor->read_proto) == 4 || + spi_nor_get_protocol_width(nor->write_proto) == 4)) + return 0; + + return nor->params.quad_enable(nor); +} + static int spi_nor_init(struct spi_nor *nor) { int err; if (nor->clear_sr_bp) { - if (nor->quad_enable == spansion_quad_enable) + if (nor->params.quad_enable == spansion_quad_enable) nor->clear_sr_bp = spi_nor_spansion_clear_sr_bp; err = nor->clear_sr_bp(nor); @@ -4044,12 +4691,10 @@ static int spi_nor_init(struct spi_nor *nor) } } - if (nor->quad_enable) { - err = nor->quad_enable(nor); - if (err) { - dev_err(nor->dev, "quad mode not supported\n"); - return err; - } + err = spi_nor_quad_enable(nor); + if (err) { + dev_err(nor->dev, "quad mode not supported\n"); + return err; } if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES)) { @@ -4062,7 +4707,7 @@ static int spi_nor_init(struct spi_nor *nor) */ WARN_ONCE(nor->flags & SNOR_F_BROKEN_RESET, "enabling reset hack; may not recover from unexpected reboots\n"); - set_4byte(nor, true); + nor->params.set_4byte(nor, true); } return 0; @@ -4086,7 +4731,7 @@ void spi_nor_restore(struct spi_nor *nor) /* restore the addressing mode */ if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES) && nor->flags & SNOR_F_BROKEN_RESET) - set_4byte(nor, false); + nor->params.set_4byte(nor, false); } EXPORT_SYMBOL_GPL(spi_nor_restore); @@ -4102,25 +4747,47 @@ static const struct flash_info *spi_nor_match_id(const char *name) return NULL; } -int spi_nor_scan(struct spi_nor *nor, const char *name, - const struct spi_nor_hwcaps *hwcaps) +static int spi_nor_set_addr_width(struct spi_nor *nor) +{ + if (nor->addr_width) { + /* already configured from SFDP */ + } else if (nor->info->addr_width) { + nor->addr_width = nor->info->addr_width; + } else if (nor->mtd.size > 0x1000000) { + /* enable 4-byte addressing if the device exceeds 16MiB */ + nor->addr_width = 4; + } else { + nor->addr_width = 3; + } + + if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) { + dev_err(nor->dev, "address width is too large: %u\n", + nor->addr_width); + return -EINVAL; + } + + /* Set 4byte opcodes when possible. */ + if (nor->addr_width == 4 && nor->flags & SNOR_F_4B_OPCODES && + !(nor->flags & SNOR_F_HAS_4BAIT)) + spi_nor_set_4byte_opcodes(nor); + + return 0; +} + +static void spi_nor_debugfs_init(struct spi_nor *nor, + const struct flash_info *info) { - struct spi_nor_flash_parameter params; - const struct flash_info *info = NULL; - struct device *dev = nor->dev; struct mtd_info *mtd = &nor->mtd; - struct device_node *np = spi_nor_get_flash_node(nor); - int ret; - int i; - ret = spi_nor_check(nor); - if (ret) - return ret; + mtd->dbg.partname = info->name; + mtd->dbg.partid = devm_kasprintf(nor->dev, GFP_KERNEL, "spi-nor:%*phN", + info->id_len, info->id); +} - /* Reset SPI protocol for all commands. */ - nor->reg_proto = SNOR_PROTO_1_1_1; - nor->read_proto = SNOR_PROTO_1_1_1; - nor->write_proto = SNOR_PROTO_1_1_1; +static const struct flash_info *spi_nor_get_flash_info(struct spi_nor *nor, + const char *name) +{ + const struct flash_info *info = NULL; if (name) info = spi_nor_match_id(name); @@ -4128,7 +4795,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, if (!info) info = spi_nor_read_id(nor); if (IS_ERR_OR_NULL(info)) - return -ENOENT; + return ERR_PTR(-ENOENT); /* * If caller has specified name of flash model that can normally be @@ -4139,7 +4806,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, jinfo = spi_nor_read_id(nor); if (IS_ERR(jinfo)) { - return PTR_ERR(jinfo); + return jinfo; } else if (jinfo != info) { /* * JEDEC knows better, so overwrite platform ID. We @@ -4148,14 +4815,57 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, * marked read-only, and we don't want to lose that * information, even if it's not 100% accurate. */ - dev_warn(dev, "found %s, expected %s\n", + dev_warn(nor->dev, "found %s, expected %s\n", jinfo->name, info->name); info = jinfo; } } + return info; +} + +int spi_nor_scan(struct spi_nor *nor, const char *name, + const struct spi_nor_hwcaps *hwcaps) +{ + const struct flash_info *info; + struct device *dev = nor->dev; + struct mtd_info *mtd = &nor->mtd; + struct device_node *np = spi_nor_get_flash_node(nor); + struct spi_nor_flash_parameter *params = &nor->params; + int ret; + int i; + + ret = spi_nor_check(nor); + if (ret) + return ret; + + /* Reset SPI protocol for all commands. */ + nor->reg_proto = SNOR_PROTO_1_1_1; + nor->read_proto = SNOR_PROTO_1_1_1; + nor->write_proto = SNOR_PROTO_1_1_1; + + /* + * We need the bounce buffer early to read/write registers when going + * through the spi-mem layer (buffers have to be DMA-able). + * For spi-mem drivers, we'll reallocate a new buffer if + * nor->page_size turns out to be greater than PAGE_SIZE (which + * shouldn't happen before long since NOR pages are usually less + * than 1KB) after spi_nor_scan() returns. + */ + nor->bouncebuf_size = PAGE_SIZE; + nor->bouncebuf = devm_kmalloc(dev, nor->bouncebuf_size, + GFP_KERNEL); + if (!nor->bouncebuf) + return -ENOMEM; + + info = spi_nor_get_flash_info(nor, name); + if (IS_ERR(info)) + return PTR_ERR(info); + nor->info = info; + spi_nor_debugfs_init(nor, info); + mutex_init(&nor->lock); /* @@ -4163,9 +4873,12 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, * spi_nor_wait_till_ready(). Xilinx S3AN share MFR * with Atmel spi-nor */ - if (info->flags & SPI_S3AN) + if (info->flags & SPI_NOR_XSR_RDY) nor->flags |= SNOR_F_READY_XSR_RDY; + if (info->flags & SPI_NOR_HAS_LOCK) + nor->flags |= SNOR_F_HAS_LOCK; + /* * Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up * with the software protection bits set. @@ -4176,10 +4889,8 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, nor->info->flags & SPI_NOR_HAS_LOCK) nor->clear_sr_bp = spi_nor_clear_sr_bp; - /* Parse the Serial Flash Discoverable Parameters table. */ - ret = spi_nor_init_params(nor, ¶ms); - if (ret) - return ret; + /* Init flash parameters based on flash_info struct and SFDP */ + spi_nor_init_params(nor); if (!mtd->name) mtd->name = dev_name(dev); @@ -4187,21 +4898,12 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, mtd->type = MTD_NORFLASH; mtd->writesize = 1; mtd->flags = MTD_CAP_NORFLASH; - mtd->size = params.size; + mtd->size = params->size; mtd->_erase = spi_nor_erase; mtd->_read = spi_nor_read; mtd->_resume = spi_nor_resume; - /* NOR protection support for STmicro/Micron chips and similar */ - if (JEDEC_MFR(info) == SNOR_MFR_ST || - JEDEC_MFR(info) == SNOR_MFR_MICRON || - info->flags & SPI_NOR_HAS_LOCK) { - nor->flash_lock = stm_lock; - nor->flash_unlock = stm_unlock; - nor->flash_is_locked = stm_is_locked; - } - - if (nor->flash_lock && nor->flash_unlock && nor->flash_is_locked) { + if (nor->params.locking_ops) { mtd->_lock = spi_nor_lock; mtd->_unlock = spi_nor_unlock; mtd->_is_locked = spi_nor_is_locked; @@ -4226,68 +4928,28 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, mtd->flags |= MTD_NO_ERASE; mtd->dev.parent = dev; - nor->page_size = params.page_size; + nor->page_size = params->page_size; mtd->writebufsize = nor->page_size; - if (np) { - /* If we were instantiated by DT, use it */ - if (of_property_read_bool(np, "m25p,fast-read")) - params.hwcaps.mask |= SNOR_HWCAPS_READ_FAST; - else - params.hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST; - } else { - /* If we weren't instantiated by DT, default to fast-read */ - params.hwcaps.mask |= SNOR_HWCAPS_READ_FAST; - } - if (of_property_read_bool(np, "broken-flash-reset")) nor->flags |= SNOR_F_BROKEN_RESET; - /* Some devices cannot do fast-read, no matter what DT tells us */ - if (info->flags & SPI_NOR_NO_FR) - params.hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST; - /* * Configure the SPI memory: * - select op codes for (Fast) Read, Page Program and Sector Erase. * - set the number of dummy cycles (mode cycles + wait states). * - set the SPI protocols for register and memory accesses. - * - set the Quad Enable bit if needed (required by SPI x-y-4 protos). */ - ret = spi_nor_setup(nor, ¶ms, hwcaps); + ret = spi_nor_setup(nor, hwcaps); if (ret) return ret; - if (nor->addr_width) { - /* already configured from SFDP */ - } else if (info->addr_width) { - nor->addr_width = info->addr_width; - } else if (mtd->size > 0x1000000) { - /* enable 4-byte addressing if the device exceeds 16MiB */ - nor->addr_width = 4; - } else { - nor->addr_width = 3; - } - - if (info->flags & SPI_NOR_4B_OPCODES || - (JEDEC_MFR(info) == SNOR_MFR_SPANSION && mtd->size > SZ_16M)) + if (info->flags & SPI_NOR_4B_OPCODES) nor->flags |= SNOR_F_4B_OPCODES; - if (nor->addr_width == 4 && nor->flags & SNOR_F_4B_OPCODES && - !(nor->flags & SNOR_F_HAS_4BAIT)) - spi_nor_set_4byte_opcodes(nor); - - if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) { - dev_err(dev, "address width is too large: %u\n", - nor->addr_width); - return -EINVAL; - } - - if (info->flags & SPI_S3AN) { - ret = s3an_nor_scan(nor); - if (ret) - return ret; - } + ret = spi_nor_set_addr_width(nor); + if (ret) + return ret; /* Send all the required SPI flash commands to initialize device */ ret = spi_nor_init(nor); @@ -4317,6 +4979,174 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, } EXPORT_SYMBOL_GPL(spi_nor_scan); +static int spi_nor_probe(struct spi_mem *spimem) +{ + struct spi_device *spi = spimem->spi; + struct flash_platform_data *data = dev_get_platdata(&spi->dev); + struct spi_nor *nor; + /* + * Enable all caps by default. The core will mask them after + * checking what's really supported using spi_mem_supports_op(). + */ + const struct spi_nor_hwcaps hwcaps = { .mask = SNOR_HWCAPS_ALL }; + char *flash_name; + int ret; + + nor = devm_kzalloc(&spi->dev, sizeof(*nor), GFP_KERNEL); + if (!nor) + return -ENOMEM; + + nor->spimem = spimem; + nor->dev = &spi->dev; + spi_nor_set_flash_node(nor, spi->dev.of_node); + + spi_mem_set_drvdata(spimem, nor); + + if (data && data->name) + nor->mtd.name = data->name; + + if (!nor->mtd.name) + nor->mtd.name = spi_mem_get_name(spimem); + + /* + * For some (historical?) reason many platforms provide two different + * names in flash_platform_data: "name" and "type". Quite often name is + * set to "m25p80" and then "type" provides a real chip name. + * If that's the case, respect "type" and ignore a "name". + */ + if (data && data->type) + flash_name = data->type; + else if (!strcmp(spi->modalias, "spi-nor")) + flash_name = NULL; /* auto-detect */ + else + flash_name = spi->modalias; + + ret = spi_nor_scan(nor, flash_name, &hwcaps); + if (ret) + return ret; + + /* + * None of the existing parts have > 512B pages, but let's play safe + * and add this logic so that if anyone ever adds support for such + * a NOR we don't end up with buffer overflows. + */ + if (nor->page_size > PAGE_SIZE) { + nor->bouncebuf_size = nor->page_size; + devm_kfree(nor->dev, nor->bouncebuf); + nor->bouncebuf = devm_kmalloc(nor->dev, + nor->bouncebuf_size, + GFP_KERNEL); + if (!nor->bouncebuf) + return -ENOMEM; + } + + return mtd_device_register(&nor->mtd, data ? data->parts : NULL, + data ? data->nr_parts : 0); +} + +static int spi_nor_remove(struct spi_mem *spimem) +{ + struct spi_nor *nor = spi_mem_get_drvdata(spimem); + + spi_nor_restore(nor); + + /* Clean up MTD stuff. */ + return mtd_device_unregister(&nor->mtd); +} + +static void spi_nor_shutdown(struct spi_mem *spimem) +{ + struct spi_nor *nor = spi_mem_get_drvdata(spimem); + + spi_nor_restore(nor); +} + +/* + * Do NOT add to this array without reading the following: + * + * Historically, many flash devices are bound to this driver by their name. But + * since most of these flash are compatible to some extent, and their + * differences can often be differentiated by the JEDEC read-ID command, we + * encourage new users to add support to the spi-nor library, and simply bind + * against a generic string here (e.g., "jedec,spi-nor"). + * + * Many flash names are kept here in this list (as well as in spi-nor.c) to + * keep them available as module aliases for existing platforms. + */ +static const struct spi_device_id spi_nor_dev_ids[] = { + /* + * Allow non-DT platform devices to bind to the "spi-nor" modalias, and + * hack around the fact that the SPI core does not provide uevent + * matching for .of_match_table + */ + {"spi-nor"}, + + /* + * Entries not used in DTs that should be safe to drop after replacing + * them with "spi-nor" in platform data. + */ + {"s25sl064a"}, {"w25x16"}, {"m25p10"}, {"m25px64"}, + + /* + * Entries that were used in DTs without "jedec,spi-nor" fallback and + * should be kept for backward compatibility. + */ + {"at25df321a"}, {"at25df641"}, {"at26df081a"}, + {"mx25l4005a"}, {"mx25l1606e"}, {"mx25l6405d"}, {"mx25l12805d"}, + {"mx25l25635e"},{"mx66l51235l"}, + {"n25q064"}, {"n25q128a11"}, {"n25q128a13"}, {"n25q512a"}, + {"s25fl256s1"}, {"s25fl512s"}, {"s25sl12801"}, {"s25fl008k"}, + {"s25fl064k"}, + {"sst25vf040b"},{"sst25vf016b"},{"sst25vf032b"},{"sst25wf040"}, + {"m25p40"}, {"m25p80"}, {"m25p16"}, {"m25p32"}, + {"m25p64"}, {"m25p128"}, + {"w25x80"}, {"w25x32"}, {"w25q32"}, {"w25q32dw"}, + {"w25q80bl"}, {"w25q128"}, {"w25q256"}, + + /* Flashes that can't be detected using JEDEC */ + {"m25p05-nonjedec"}, {"m25p10-nonjedec"}, {"m25p20-nonjedec"}, + {"m25p40-nonjedec"}, {"m25p80-nonjedec"}, {"m25p16-nonjedec"}, + {"m25p32-nonjedec"}, {"m25p64-nonjedec"}, {"m25p128-nonjedec"}, + + /* Everspin MRAMs (non-JEDEC) */ + { "mr25h128" }, /* 128 Kib, 40 MHz */ + { "mr25h256" }, /* 256 Kib, 40 MHz */ + { "mr25h10" }, /* 1 Mib, 40 MHz */ + { "mr25h40" }, /* 4 Mib, 40 MHz */ + + { }, +}; +MODULE_DEVICE_TABLE(spi, spi_nor_dev_ids); + +static const struct of_device_id spi_nor_of_table[] = { + /* + * Generic compatibility for SPI NOR that can be identified by the + * JEDEC READ ID opcode (0x9F). Use this, if possible. + */ + { .compatible = "jedec,spi-nor" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, spi_nor_of_table); + +/* + * REVISIT: many of these chips have deep power-down modes, which + * should clearly be entered on suspend() to minimize power use. + * And also when they're otherwise idle... + */ +static struct spi_mem_driver spi_nor_driver = { + .spidrv = { + .driver = { + .name = "spi-nor", + .of_match_table = spi_nor_of_table, + }, + .id_table = spi_nor_dev_ids, + }, + .probe = spi_nor_probe, + .remove = spi_nor_remove, + .shutdown = spi_nor_shutdown, +}; +module_spi_mem_driver(spi_nor_driver); + MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Huang Shijie <shijie8@gmail.com>"); MODULE_AUTHOR("Mike Lavender"); |