diff options
Diffstat (limited to 'drivers/mtd/nand/raw')
| -rw-r--r-- | drivers/mtd/nand/raw/denali.c | 2 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/fsmc_nand.c | 21 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c | 13 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/jz4740_nand.c | 2 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/nand_base.c | 1 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/nand_bbt.c | 2 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/qcom_nandc.c | 20 |
7 files changed, 20 insertions, 41 deletions
diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c index eebac35304c6..6e8edc9375dd 100644 --- a/drivers/mtd/nand/raw/denali.c +++ b/drivers/mtd/nand/raw/denali.c @@ -1322,7 +1322,7 @@ int denali_init(struct denali_nand_info *denali) } /* clk rate info is needed for setup_data_interface */ - if (denali->clk_rate && denali->clk_x_rate) + if (!denali->clk_rate || !denali->clk_x_rate) chip->options |= NAND_KEEP_TIMINGS; chip->legacy.dummy_controller.ops = &denali_controller_ops; diff --git a/drivers/mtd/nand/raw/fsmc_nand.c b/drivers/mtd/nand/raw/fsmc_nand.c index 325b4414dccc..c9149a37f8f0 100644 --- a/drivers/mtd/nand/raw/fsmc_nand.c +++ b/drivers/mtd/nand/raw/fsmc_nand.c @@ -593,23 +593,6 @@ static void fsmc_write_buf_dma(struct fsmc_nand_data *host, const u8 *buf, dma_xfer(host, (void *)buf, len, DMA_TO_DEVICE); } -/* fsmc_select_chip - assert or deassert nCE */ -static void fsmc_ce_ctrl(struct fsmc_nand_data *host, bool assert) -{ - u32 pc = readl(host->regs_va + FSMC_PC); - - if (!assert) - writel_relaxed(pc & ~FSMC_ENABLE, host->regs_va + FSMC_PC); - else - writel_relaxed(pc | FSMC_ENABLE, host->regs_va + FSMC_PC); - - /* - * nCE line changes must be applied before returning from this - * function. - */ - mb(); -} - /* * fsmc_exec_op - hook called by the core to execute NAND operations * @@ -627,8 +610,6 @@ static int fsmc_exec_op(struct nand_chip *chip, const struct nand_operation *op, pr_debug("Executing operation [%d instructions]:\n", op->ninstrs); - fsmc_ce_ctrl(host, true); - for (op_id = 0; op_id < op->ninstrs; op_id++) { instr = &op->instrs[op_id]; @@ -686,8 +667,6 @@ static int fsmc_exec_op(struct nand_chip *chip, const struct nand_operation *op, } } - fsmc_ce_ctrl(host, false); - return ret; } diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c index bd4cfac6b5aa..a4768df5083f 100644 --- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c @@ -155,9 +155,10 @@ int gpmi_init(struct gpmi_nand_data *this) /* * Reset BCH here, too. We got failures otherwise :( - * See later BCH reset for explanation of MX23 handling + * See later BCH reset for explanation of MX23 and MX28 handling */ - ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MX23(this)); + ret = gpmi_reset_block(r->bch_regs, + GPMI_IS_MX23(this) || GPMI_IS_MX28(this)); if (ret) goto err_out; @@ -263,12 +264,10 @@ int bch_set_geometry(struct gpmi_nand_data *this) /* * Due to erratum #2847 of the MX23, the BCH cannot be soft reset on this * chip, otherwise it will lock up. So we skip resetting BCH on the MX23. - * On the other hand, the MX28 needs the reset, because one case has been - * seen where the BCH produced ECC errors constantly after 10000 - * consecutive reboots. The latter case has not been seen on the MX23 - * yet, still we don't know if it could happen there as well. + * and MX28. */ - ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MX23(this)); + ret = gpmi_reset_block(r->bch_regs, + GPMI_IS_MX23(this) || GPMI_IS_MX28(this)); if (ret) goto err_out; diff --git a/drivers/mtd/nand/raw/jz4740_nand.c b/drivers/mtd/nand/raw/jz4740_nand.c index f92ae5aa2a54..9526d5b23c80 100644 --- a/drivers/mtd/nand/raw/jz4740_nand.c +++ b/drivers/mtd/nand/raw/jz4740_nand.c @@ -260,7 +260,7 @@ static int jz_nand_correct_ecc_rs(struct nand_chip *chip, uint8_t *dat, } static int jz_nand_ioremap_resource(struct platform_device *pdev, - const char *name, struct resource **res, void *__iomem *base) + const char *name, struct resource **res, void __iomem **base) { int ret; diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c index cca4b24d2ffa..839494ac457c 100644 --- a/drivers/mtd/nand/raw/nand_base.c +++ b/drivers/mtd/nand/raw/nand_base.c @@ -410,6 +410,7 @@ static int nand_check_wp(struct nand_chip *chip) /** * nand_fill_oob - [INTERN] Transfer client buffer to oob + * @chip: NAND chip object * @oob: oob data buffer * @len: oob data write length * @ops: oob ops structure diff --git a/drivers/mtd/nand/raw/nand_bbt.c b/drivers/mtd/nand/raw/nand_bbt.c index 1b722fe9213c..19a2b563acdf 100644 --- a/drivers/mtd/nand/raw/nand_bbt.c +++ b/drivers/mtd/nand/raw/nand_bbt.c @@ -158,7 +158,7 @@ static u32 add_marker_len(struct nand_bbt_descr *td) /** * read_bbt - [GENERIC] Read the bad block table starting from page - * @chip: NAND chip object + * @this: NAND chip object * @buf: temporary buffer * @page: the starting page * @num: the number of bbt descriptors to read diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c index 46c62a31fa46..920e7375084f 100644 --- a/drivers/mtd/nand/raw/qcom_nandc.c +++ b/drivers/mtd/nand/raw/qcom_nandc.c @@ -2833,6 +2833,16 @@ static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc, if (ret) return ret; + if (nandc->props->is_bam) { + free_bam_transaction(nandc); + nandc->bam_txn = alloc_bam_transaction(nandc); + if (!nandc->bam_txn) { + dev_err(nandc->dev, + "failed to allocate bam transaction\n"); + return -ENOMEM; + } + } + ret = mtd_device_register(mtd, NULL, 0); if (ret) nand_cleanup(chip); @@ -2847,16 +2857,6 @@ static int qcom_probe_nand_devices(struct qcom_nand_controller *nandc) struct qcom_nand_host *host; int ret; - if (nandc->props->is_bam) { - free_bam_transaction(nandc); - nandc->bam_txn = alloc_bam_transaction(nandc); - if (!nandc->bam_txn) { - dev_err(nandc->dev, - "failed to allocate bam transaction\n"); - return -ENOMEM; - } - } - for_each_available_child_of_node(dn, child) { host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL); if (!host) { |