diff options
Diffstat (limited to 'drivers/mtd/nand/raw/davinci_nand.c')
-rw-r--r-- | drivers/mtd/nand/raw/davinci_nand.c | 231 |
1 files changed, 118 insertions, 113 deletions
diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c index cd12e5abafde..40145e206a6b 100644 --- a/drivers/mtd/nand/raw/davinci_nand.c +++ b/drivers/mtd/nand/raw/davinci_nand.c @@ -53,15 +53,14 @@ struct davinci_nand_info { struct nand_chip chip; - struct device *dev; + struct platform_device *pdev; bool is_readmode; void __iomem *base; void __iomem *vaddr; - uint32_t ioaddr; - uint32_t current_cs; + void __iomem *current_cs; uint32_t mask_chipsel; uint32_t mask_ale; @@ -102,17 +101,17 @@ static void nand_davinci_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) { struct davinci_nand_info *info = to_davinci_nand(mtd); - uint32_t addr = info->current_cs; + void __iomem *addr = info->current_cs; struct nand_chip *nand = mtd_to_nand(mtd); /* Did the control lines change? */ if (ctrl & NAND_CTRL_CHANGE) { if ((ctrl & NAND_CTRL_CLE) == NAND_CTRL_CLE) - addr |= info->mask_cle; + addr += info->mask_cle; else if ((ctrl & NAND_CTRL_ALE) == NAND_CTRL_ALE) - addr |= info->mask_ale; + addr += info->mask_ale; - nand->IO_ADDR_W = (void __iomem __force *)addr; + nand->IO_ADDR_W = addr; } if (cmd != NAND_CMD_NONE) @@ -122,14 +121,14 @@ static void nand_davinci_hwcontrol(struct mtd_info *mtd, int cmd, static void nand_davinci_select_chip(struct mtd_info *mtd, int chip) { struct davinci_nand_info *info = to_davinci_nand(mtd); - uint32_t addr = info->ioaddr; + + info->current_cs = info->vaddr; /* maybe kick in a second chipselect */ if (chip > 0) - addr |= info->mask_chipsel; - info->current_cs = addr; + info->current_cs += info->mask_chipsel; - info->chip.IO_ADDR_W = (void __iomem __force *)addr; + info->chip.IO_ADDR_W = info->current_cs; info->chip.IO_ADDR_R = info->chip.IO_ADDR_W; } @@ -319,7 +318,7 @@ static int nand_davinci_correct_4bit(struct mtd_info *mtd, /* Unpack ten bytes into eight 10 bit values. We know we're * little-endian, and use type punning for less shifting/masking. */ - if (WARN_ON(0x01 & (unsigned) ecc_code)) + if (WARN_ON(0x01 & (uintptr_t)ecc_code)) return -EINVAL; ecc16 = (unsigned short *)ecc_code; @@ -441,9 +440,9 @@ static void nand_davinci_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) { struct nand_chip *chip = mtd_to_nand(mtd); - if ((0x03 & ((unsigned)buf)) == 0 && (0x03 & len) == 0) + if ((0x03 & ((uintptr_t)buf)) == 0 && (0x03 & len) == 0) ioread32_rep(chip->IO_ADDR_R, buf, len >> 2); - else if ((0x01 & ((unsigned)buf)) == 0 && (0x01 & len) == 0) + else if ((0x01 & ((uintptr_t)buf)) == 0 && (0x01 & len) == 0) ioread16_rep(chip->IO_ADDR_R, buf, len >> 1); else ioread8_rep(chip->IO_ADDR_R, buf, len); @@ -454,9 +453,9 @@ static void nand_davinci_write_buf(struct mtd_info *mtd, { struct nand_chip *chip = mtd_to_nand(mtd); - if ((0x03 & ((unsigned)buf)) == 0 && (0x03 & len) == 0) + if ((0x03 & ((uintptr_t)buf)) == 0 && (0x03 & len) == 0) iowrite32_rep(chip->IO_ADDR_R, buf, len >> 2); - else if ((0x01 & ((unsigned)buf)) == 0 && (0x01 & len) == 0) + else if ((0x01 & ((uintptr_t)buf)) == 0 && (0x01 & len) == 0) iowrite16_rep(chip->IO_ADDR_R, buf, len >> 1); else iowrite8_rep(chip->IO_ADDR_R, buf, len); @@ -606,6 +605,104 @@ static struct davinci_nand_pdata } #endif +static int davinci_nand_attach_chip(struct nand_chip *chip) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + struct davinci_nand_info *info = to_davinci_nand(mtd); + struct davinci_nand_pdata *pdata = nand_davinci_get_pdata(info->pdev); + int ret = 0; + + if (IS_ERR(pdata)) + return PTR_ERR(pdata); + + switch (info->chip.ecc.mode) { + case NAND_ECC_NONE: + pdata->ecc_bits = 0; + break; + case NAND_ECC_SOFT: + pdata->ecc_bits = 0; + /* + * This driver expects Hamming based ECC when ecc_mode is set + * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_HAMMING to + * avoid adding an extra ->ecc_algo field to + * davinci_nand_pdata. + */ + info->chip.ecc.algo = NAND_ECC_HAMMING; + break; + case NAND_ECC_HW: + if (pdata->ecc_bits == 4) { + /* + * No sanity checks: CPUs must support this, + * and the chips may not use NAND_BUSWIDTH_16. + */ + + /* No sharing 4-bit hardware between chipselects yet */ + spin_lock_irq(&davinci_nand_lock); + if (ecc4_busy) + ret = -EBUSY; + else + ecc4_busy = true; + spin_unlock_irq(&davinci_nand_lock); + + if (ret == -EBUSY) + return ret; + + info->chip.ecc.calculate = nand_davinci_calculate_4bit; + info->chip.ecc.correct = nand_davinci_correct_4bit; + info->chip.ecc.hwctl = nand_davinci_hwctl_4bit; + info->chip.ecc.bytes = 10; + info->chip.ecc.options = NAND_ECC_GENERIC_ERASED_CHECK; + info->chip.ecc.algo = NAND_ECC_BCH; + } else { + /* 1bit ecc hamming */ + info->chip.ecc.calculate = nand_davinci_calculate_1bit; + info->chip.ecc.correct = nand_davinci_correct_1bit; + info->chip.ecc.hwctl = nand_davinci_hwctl_1bit; + info->chip.ecc.bytes = 3; + info->chip.ecc.algo = NAND_ECC_HAMMING; + } + info->chip.ecc.size = 512; + info->chip.ecc.strength = pdata->ecc_bits; + break; + default: + return -EINVAL; + } + + /* + * Update ECC layout if needed ... for 1-bit HW ECC, the default + * is OK, but it allocates 6 bytes when only 3 are needed (for + * each 512 bytes). For the 4-bit HW ECC, that default is not + * usable: 10 bytes are needed, not 6. + */ + if (pdata->ecc_bits == 4) { + int chunks = mtd->writesize / 512; + + if (!chunks || mtd->oobsize < 16) { + dev_dbg(&info->pdev->dev, "too small\n"); + return -EINVAL; + } + + /* For small page chips, preserve the manufacturer's + * badblock marking data ... and make sure a flash BBT + * table marker fits in the free bytes. + */ + if (chunks == 1) { + mtd_set_ooblayout(mtd, &hwecc4_small_ooblayout_ops); + } else if (chunks == 4 || chunks == 8) { + mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); + info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST; + } else { + return -EIO; + } + } + + return ret; +} + +static const struct nand_controller_ops davinci_nand_controller_ops = { + .attach_chip = davinci_nand_attach_chip, +}; + static int nand_davinci_probe(struct platform_device *pdev) { struct davinci_nand_pdata *pdata; @@ -659,7 +756,7 @@ static int nand_davinci_probe(struct platform_device *pdev) return -EADDRNOTAVAIL; } - info->dev = &pdev->dev; + info->pdev = pdev; info->base = base; info->vaddr = vaddr; @@ -680,9 +777,7 @@ static int nand_davinci_probe(struct platform_device *pdev) info->chip.bbt_md = pdata->bbt_md; info->timing = pdata->timing; - info->ioaddr = (uint32_t __force) vaddr; - - info->current_cs = info->ioaddr; + info->current_cs = info->vaddr; info->core_chipsel = pdata->core_chipsel; info->mask_chipsel = pdata->mask_chipsel; @@ -711,100 +806,15 @@ static int nand_davinci_probe(struct platform_device *pdev) spin_unlock_irq(&davinci_nand_lock); /* Scan to find existence of the device(s) */ - ret = nand_scan_ident(mtd, pdata->mask_chipsel ? 2 : 1, NULL); + info->chip.dummy_controller.ops = &davinci_nand_controller_ops; + ret = nand_scan(mtd, pdata->mask_chipsel ? 2 : 1); if (ret < 0) { dev_dbg(&pdev->dev, "no NAND chip(s) found\n"); return ret; } - switch (info->chip.ecc.mode) { - case NAND_ECC_NONE: - pdata->ecc_bits = 0; - break; - case NAND_ECC_SOFT: - pdata->ecc_bits = 0; - /* - * This driver expects Hamming based ECC when ecc_mode is set - * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_HAMMING to - * avoid adding an extra ->ecc_algo field to - * davinci_nand_pdata. - */ - info->chip.ecc.algo = NAND_ECC_HAMMING; - break; - case NAND_ECC_HW: - if (pdata->ecc_bits == 4) { - /* No sanity checks: CPUs must support this, - * and the chips may not use NAND_BUSWIDTH_16. - */ - - /* No sharing 4-bit hardware between chipselects yet */ - spin_lock_irq(&davinci_nand_lock); - if (ecc4_busy) - ret = -EBUSY; - else - ecc4_busy = true; - spin_unlock_irq(&davinci_nand_lock); - - if (ret == -EBUSY) - return ret; - - info->chip.ecc.calculate = nand_davinci_calculate_4bit; - info->chip.ecc.correct = nand_davinci_correct_4bit; - info->chip.ecc.hwctl = nand_davinci_hwctl_4bit; - info->chip.ecc.bytes = 10; - info->chip.ecc.options = NAND_ECC_GENERIC_ERASED_CHECK; - info->chip.ecc.algo = NAND_ECC_BCH; - } else { - /* 1bit ecc hamming */ - info->chip.ecc.calculate = nand_davinci_calculate_1bit; - info->chip.ecc.correct = nand_davinci_correct_1bit; - info->chip.ecc.hwctl = nand_davinci_hwctl_1bit; - info->chip.ecc.bytes = 3; - info->chip.ecc.algo = NAND_ECC_HAMMING; - } - info->chip.ecc.size = 512; - info->chip.ecc.strength = pdata->ecc_bits; - break; - default: - return -EINVAL; - } - - /* Update ECC layout if needed ... for 1-bit HW ECC, the default - * is OK, but it allocates 6 bytes when only 3 are needed (for - * each 512 bytes). For the 4-bit HW ECC, that default is not - * usable: 10 bytes are needed, not 6. - */ - if (pdata->ecc_bits == 4) { - int chunks = mtd->writesize / 512; - - if (!chunks || mtd->oobsize < 16) { - dev_dbg(&pdev->dev, "too small\n"); - ret = -EINVAL; - goto err; - } - - /* For small page chips, preserve the manufacturer's - * badblock marking data ... and make sure a flash BBT - * table marker fits in the free bytes. - */ - if (chunks == 1) { - mtd_set_ooblayout(mtd, &hwecc4_small_ooblayout_ops); - } else if (chunks == 4 || chunks == 8) { - mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); - info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST; - } else { - ret = -EIO; - goto err; - } - } - - ret = nand_scan_tail(mtd); - if (ret < 0) - goto err; - if (pdata->parts) - ret = mtd_device_parse_register(mtd, NULL, NULL, - pdata->parts, pdata->nr_parts); + ret = mtd_device_register(mtd, pdata->parts, pdata->nr_parts); else ret = mtd_device_register(mtd, NULL, 0); if (ret < 0) @@ -819,11 +829,6 @@ static int nand_davinci_probe(struct platform_device *pdev) err_cleanup_nand: nand_cleanup(&info->chip); -err: - spin_lock_irq(&davinci_nand_lock); - if (info->chip.ecc.mode == NAND_ECC_HW_SYNDROME) - ecc4_busy = false; - spin_unlock_irq(&davinci_nand_lock); return ret; } |