diff options
Diffstat (limited to 'drivers/mmc/host')
| -rw-r--r-- | drivers/mmc/host/dw_mmc.c | 6 | ||||
| -rw-r--r-- | drivers/mmc/host/mmci_stm32_sdmmc.c | 7 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci-iproc.c | 21 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci-msm.c | 18 |
4 files changed, 46 insertions, 6 deletions
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index d333130d1531..c3229d8c7041 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -2018,8 +2018,8 @@ static void dw_mci_tasklet_func(struct tasklet_struct *t) continue; } - dw_mci_stop_dma(host); send_stop_abort(host, data); + dw_mci_stop_dma(host); state = STATE_SENDING_STOP; break; } @@ -2043,10 +2043,10 @@ static void dw_mci_tasklet_func(struct tasklet_struct *t) */ if (test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events)) { - dw_mci_stop_dma(host); if (!(host->data_status & (SDMMC_INT_DRTO | SDMMC_INT_EBE))) send_stop_abort(host, data); + dw_mci_stop_dma(host); state = STATE_DATA_ERROR; break; } @@ -2079,10 +2079,10 @@ static void dw_mci_tasklet_func(struct tasklet_struct *t) */ if (test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events)) { - dw_mci_stop_dma(host); if (!(host->data_status & (SDMMC_INT_DRTO | SDMMC_INT_EBE))) send_stop_abort(host, data); + dw_mci_stop_dma(host); state = STATE_DATA_ERROR; break; } diff --git a/drivers/mmc/host/mmci_stm32_sdmmc.c b/drivers/mmc/host/mmci_stm32_sdmmc.c index 51db30acf4dc..fdaa11f92fe6 100644 --- a/drivers/mmc/host/mmci_stm32_sdmmc.c +++ b/drivers/mmc/host/mmci_stm32_sdmmc.c @@ -479,8 +479,9 @@ static int sdmmc_post_sig_volt_switch(struct mmci_host *host, u32 status; int ret = 0; - if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) { - spin_lock_irqsave(&host->lock, flags); + spin_lock_irqsave(&host->lock, flags); + if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180 && + host->pwr_reg & MCI_STM32_VSWITCHEN) { mmci_write_pwrreg(host, host->pwr_reg | MCI_STM32_VSWITCH); spin_unlock_irqrestore(&host->lock, flags); @@ -492,9 +493,11 @@ static int sdmmc_post_sig_volt_switch(struct mmci_host *host, writel_relaxed(MCI_STM32_VSWENDC | MCI_STM32_CKSTOPC, host->base + MMCICLEAR); + spin_lock_irqsave(&host->lock, flags); mmci_write_pwrreg(host, host->pwr_reg & ~(MCI_STM32_VSWITCHEN | MCI_STM32_VSWITCH)); } + spin_unlock_irqrestore(&host->lock, flags); return ret; } diff --git a/drivers/mmc/host/sdhci-iproc.c b/drivers/mmc/host/sdhci-iproc.c index cce390fe9cf3..e7565c671998 100644 --- a/drivers/mmc/host/sdhci-iproc.c +++ b/drivers/mmc/host/sdhci-iproc.c @@ -173,6 +173,23 @@ static unsigned int sdhci_iproc_get_max_clock(struct sdhci_host *host) return pltfm_host->clock; } +/* + * There is a known bug on BCM2711's SDHCI core integration where the + * controller will hang when the difference between the core clock and the bus + * clock is too great. Specifically this can be reproduced under the following + * conditions: + * + * - No SD card plugged in, polling thread is running, probing cards at + * 100 kHz. + * - BCM2711's core clock configured at 500MHz or more + * + * So we set 200kHz as the minimum clock frequency available for that SoC. + */ +static unsigned int sdhci_iproc_bcm2711_get_min_clock(struct sdhci_host *host) +{ + return 200000; +} + static const struct sdhci_ops sdhci_iproc_ops = { .set_clock = sdhci_set_clock, .get_max_clock = sdhci_iproc_get_max_clock, @@ -271,13 +288,15 @@ static const struct sdhci_ops sdhci_iproc_bcm2711_ops = { .set_clock = sdhci_set_clock, .set_power = sdhci_set_power_and_bus_voltage, .get_max_clock = sdhci_iproc_get_max_clock, + .get_min_clock = sdhci_iproc_bcm2711_get_min_clock, .set_bus_width = sdhci_set_bus_width, .reset = sdhci_reset, .set_uhs_signaling = sdhci_set_uhs_signaling, }; static const struct sdhci_pltfm_data sdhci_bcm2711_pltfm_data = { - .quirks = SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12, + .quirks = SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 | + SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, .ops = &sdhci_iproc_bcm2711_ops, }; diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index e44b7a66b73c..290a14cdc1cf 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -2089,6 +2089,23 @@ static void sdhci_msm_cqe_disable(struct mmc_host *mmc, bool recovery) sdhci_cqe_disable(mmc, recovery); } +static void sdhci_msm_set_timeout(struct sdhci_host *host, struct mmc_command *cmd) +{ + u32 count, start = 15; + + __sdhci_set_timeout(host, cmd); + count = sdhci_readb(host, SDHCI_TIMEOUT_CONTROL); + /* + * Update software timeout value if its value is less than hardware data + * timeout value. Qcom SoC hardware data timeout value was calculated + * using 4 * MCLK * 2^(count + 13). where MCLK = 1 / host->clock. + */ + if (cmd && cmd->data && host->clock > 400000 && + host->clock <= 50000000 && + ((1 << (count + start)) > (10 * host->clock))) + host->data_timeout = 22LL * NSEC_PER_SEC; +} + static const struct cqhci_host_ops sdhci_msm_cqhci_ops = { .enable = sdhci_msm_cqe_enable, .disable = sdhci_msm_cqe_disable, @@ -2438,6 +2455,7 @@ static const struct sdhci_ops sdhci_msm_ops = { .irq = sdhci_msm_cqe_irq, .dump_vendor_regs = sdhci_msm_dump_vendor_regs, .set_power = sdhci_set_power_noreg, + .set_timeout = sdhci_msm_set_timeout, }; static const struct sdhci_pltfm_data sdhci_msm_pdata = { |