diff options
Diffstat (limited to 'drivers/mmc/host')
31 files changed, 2258 insertions, 262 deletions
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 49ea02c467bf..d06b2dfe3c95 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -159,6 +159,7 @@ config MMC_SDHCI_OF_ASPEED tristate "SDHCI OF support for the ASPEED SDHCI controller" depends on MMC_SDHCI_PLTFM depends on OF && OF_ADDRESS + select MMC_SDHCI_IO_ACCESSORS help This selects the ASPEED Secure Digital Host Controller Interface. @@ -368,6 +369,17 @@ config MMC_SDHCI_F_SDH30 If unsure, say N. +config MMC_SDHCI_MILBEAUT + tristate "SDHCI support for Socionext Milbeaut Serieas using F_SDH30" + depends on MMC_SDHCI_PLTFM + depends on OF + help + This selects the Secure Digital Host Controller Interface (SDHCI) + Needed by Milbeaut SoC for MMC / SD / SDIO support. + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + config MMC_SDHCI_IPROC tristate "SDHCI support for the BCM2835 & iProc SD/MMC Controller" depends on ARCH_BCM2835 || ARCH_BCM_IPROC || COMPILE_TEST @@ -1011,6 +1023,7 @@ config MMC_SDHCI_AM654 tristate "Support for the SDHCI Controller in TI's AM654 SOCs" depends on MMC_SDHCI_PLTFM && OF && REGMAP_MMIO select MMC_SDHCI_IO_ACCESSORS + select MMC_CQHCI help This selects the Secure Digital Host Controller Interface (SDHCI) support present in TI's AM654 SOCs. The controller supports @@ -1019,3 +1032,11 @@ config MMC_SDHCI_AM654 If you have a controller with this interface, say Y or M here. If unsure, say N. + +config MMC_OWL + tristate "Actions Semi Owl SD/MMC Host Controller support" + depends on HAS_DMA + depends on ARCH_ACTIONS || COMPILE_TEST + help + This selects support for the SD/MMC Host Controller on + Actions Semi Owl SoCs. diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 11c4598e91d9..21d9089e5eda 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_MMC_SDHCI_PXAV2) += sdhci-pxav2.o obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o obj-$(CONFIG_MMC_SDHCI_SIRF) += sdhci-sirf.o obj-$(CONFIG_MMC_SDHCI_F_SDH30) += sdhci_f_sdh30.o +obj-$(CONFIG_MMC_SDHCI_MILBEAUT) += sdhci-milbeaut.o obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o obj-$(CONFIG_MMC_SDHCI_AM654) += sdhci_am654.o obj-$(CONFIG_MMC_WBSD) += wbsd.o @@ -73,6 +74,7 @@ obj-$(CONFIG_MMC_SUNXI) += sunxi-mmc.o obj-$(CONFIG_MMC_USDHI6ROL0) += usdhi6rol0.o obj-$(CONFIG_MMC_TOSHIBA_PCI) += toshsd.o obj-$(CONFIG_MMC_BCM2835) += bcm2835.o +obj-$(CONFIG_MMC_OWL) += owl-mmc.o obj-$(CONFIG_MMC_REALTEK_PCI) += rtsx_pci_sdmmc.o obj-$(CONFIG_MMC_REALTEK_USB) += rtsx_usb_sdmmc.o diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index c26fbe5f2222..6f065bb5c55a 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -583,11 +583,11 @@ static void atmci_init_debugfs(struct atmel_mci_slot *slot) debugfs_create_file("regs", S_IRUSR, root, host, &atmci_regs_fops); debugfs_create_file("req", S_IRUSR, root, slot, &atmci_req_fops); - debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state); - debugfs_create_x32("pending_events", S_IRUSR, root, - (u32 *)&host->pending_events); - debugfs_create_x32("completed_events", S_IRUSR, root, - (u32 *)&host->completed_events); + debugfs_create_u32("state", S_IRUSR, root, &host->state); + debugfs_create_xul("pending_events", S_IRUSR, root, + &host->pending_events); + debugfs_create_xul("completed_events", S_IRUSR, root, + &host->completed_events); } #if defined(CONFIG_OF) @@ -2347,8 +2347,7 @@ static void atmci_cleanup_slot(struct atmel_mci_slot *slot, static int atmci_configure_dma(struct atmel_mci *host) { - host->dma.chan = dma_request_slave_channel_reason(&host->pdev->dev, - "rxtx"); + host->dma.chan = dma_request_chan(&host->pdev->dev, "rxtx"); if (PTR_ERR(host->dma.chan) == -ENODEV) { struct mci_platform_data *pdata = host->pdev->dev.platform_data; diff --git a/drivers/mmc/host/bcm2835.c b/drivers/mmc/host/bcm2835.c index 148414d7f0c9..99f61fd2a658 100644 --- a/drivers/mmc/host/bcm2835.c +++ b/drivers/mmc/host/bcm2835.c @@ -1357,7 +1357,6 @@ static int bcm2835_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct clk *clk; - struct resource *iomem; struct bcm2835_host *host; struct mmc_host *mmc; const __be32 *regaddr_p; @@ -1373,8 +1372,7 @@ static int bcm2835_probe(struct platform_device *pdev) host->pdev = pdev; spin_lock_init(&host->lock); - iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - host->ioaddr = devm_ioremap_resource(dev, iomem); + host->ioaddr = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(host->ioaddr)) { ret = PTR_ERR(host->ioaddr); goto err; diff --git a/drivers/mmc/host/cavium-octeon.c b/drivers/mmc/host/cavium-octeon.c index 22aded1065ae..916746c6c2c7 100644 --- a/drivers/mmc/host/cavium-octeon.c +++ b/drivers/mmc/host/cavium-octeon.c @@ -148,7 +148,6 @@ static int octeon_mmc_probe(struct platform_device *pdev) { struct device_node *cn, *node = pdev->dev.of_node; struct cvm_mmc_host *host; - struct resource *res; void __iomem *base; int mmc_irq[9]; int i, ret = 0; @@ -205,23 +204,13 @@ static int octeon_mmc_probe(struct platform_device *pdev) host->last_slot = -1; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "Platform resource[0] is missing\n"); - return -ENXIO; - } - base = devm_ioremap_resource(&pdev->dev, res); + base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(base)) return PTR_ERR(base); host->base = (void __iomem *)base; host->reg_off = 0; - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res) { - dev_err(&pdev->dev, "Platform resource[1] is missing\n"); - return -EINVAL; - } - base = devm_ioremap_resource(&pdev->dev, res); + base = devm_platform_ioremap_resource(pdev, 1); if (IS_ERR(base)) return PTR_ERR(base); host->dma_base = (void __iomem *)base; diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 79c55c7b4afd..fc9d4d000f97 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -176,11 +176,11 @@ static void dw_mci_init_debugfs(struct dw_mci_slot *slot) debugfs_create_file("regs", S_IRUSR, root, host, &dw_mci_regs_fops); debugfs_create_file("req", S_IRUSR, root, slot, &dw_mci_req_fops); - debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state); - debugfs_create_x32("pending_events", S_IRUSR, root, - (u32 *)&host->pending_events); - debugfs_create_x32("completed_events", S_IRUSR, root, - (u32 *)&host->completed_events); + debugfs_create_u32("state", S_IRUSR, root, &host->state); + debugfs_create_xul("pending_events", S_IRUSR, root, + &host->pending_events); + debugfs_create_xul("completed_events", S_IRUSR, root, + &host->completed_events); } #endif /* defined(CONFIG_DEBUG_FS) */ @@ -3441,8 +3441,8 @@ int dw_mci_runtime_resume(struct device *dev) * Restore the initial value at FIFOTH register * And Invalidate the prev_blksz with zero */ - mci_writel(host, FIFOTH, host->fifoth_val); - host->prev_blksz = 0; + mci_writel(host, FIFOTH, host->fifoth_val); + host->prev_blksz = 0; /* Put in max timeout */ mci_writel(host, TMOUT, 0xFFFFFFFF); diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c index f816c06ef916..78383f60a3dc 100644 --- a/drivers/mmc/host/jz4740_mmc.c +++ b/drivers/mmc/host/jz4740_mmc.c @@ -41,6 +41,7 @@ #define JZ_REG_MMC_RESP_FIFO 0x34 #define JZ_REG_MMC_RXFIFO 0x38 #define JZ_REG_MMC_TXFIFO 0x3C +#define JZ_REG_MMC_LPM 0x40 #define JZ_REG_MMC_DMAC 0x44 #define JZ_MMC_STRPCL_EXIT_MULTIPLE BIT(7) @@ -77,6 +78,8 @@ #define JZ_MMC_CMDAT_IO_ABORT BIT(11) #define JZ_MMC_CMDAT_BUS_WIDTH_4BIT BIT(10) +#define JZ_MMC_CMDAT_BUS_WIDTH_8BIT (BIT(10) | BIT(9)) +#define JZ_MMC_CMDAT_BUS_WIDTH_MASK (BIT(10) | BIT(9)) #define JZ_MMC_CMDAT_DMA_EN BIT(8) #define JZ_MMC_CMDAT_INIT BIT(7) #define JZ_MMC_CMDAT_BUSY BIT(6) @@ -98,12 +101,20 @@ #define JZ_MMC_DMAC_DMA_SEL BIT(1) #define JZ_MMC_DMAC_DMA_EN BIT(0) +#define JZ_MMC_LPM_DRV_RISING BIT(31) +#define JZ_MMC_LPM_DRV_RISING_QTR_PHASE_DLY BIT(31) +#define JZ_MMC_LPM_DRV_RISING_1NS_DLY BIT(30) +#define JZ_MMC_LPM_SMP_RISING_QTR_OR_HALF_PHASE_DLY BIT(29) +#define JZ_MMC_LPM_LOW_POWER_MODE_EN BIT(0) + #define JZ_MMC_CLK_RATE 24000000 enum jz4740_mmc_version { JZ_MMC_JZ4740, JZ_MMC_JZ4725B, + JZ_MMC_JZ4760, JZ_MMC_JZ4780, + JZ_MMC_X1000, }; enum jz4740_mmc_state { @@ -852,6 +863,22 @@ static int jz4740_mmc_set_clock_rate(struct jz4740_mmc_host *host, int rate) } writew(div, host->base + JZ_REG_MMC_CLKRT); + + if (real_rate > 25000000) { + if (host->version >= JZ_MMC_X1000) { + writel(JZ_MMC_LPM_DRV_RISING_QTR_PHASE_DLY | + JZ_MMC_LPM_SMP_RISING_QTR_OR_HALF_PHASE_DLY | + JZ_MMC_LPM_LOW_POWER_MODE_EN, + host->base + JZ_REG_MMC_LPM); + } else if (host->version >= JZ_MMC_JZ4760) { + writel(JZ_MMC_LPM_DRV_RISING | + JZ_MMC_LPM_LOW_POWER_MODE_EN, + host->base + JZ_REG_MMC_LPM); + } else if (host->version >= JZ_MMC_JZ4725B) + writel(JZ_MMC_LPM_LOW_POWER_MODE_EN, + host->base + JZ_REG_MMC_LPM); + } + return real_rate; } @@ -895,11 +922,16 @@ static void jz4740_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) switch (ios->bus_width) { case MMC_BUS_WIDTH_1: - host->cmdat &= ~JZ_MMC_CMDAT_BUS_WIDTH_4BIT; + host->cmdat &= ~JZ_MMC_CMDAT_BUS_WIDTH_MASK; break; case MMC_BUS_WIDTH_4: + host->cmdat &= ~JZ_MMC_CMDAT_BUS_WIDTH_MASK; host->cmdat |= JZ_MMC_CMDAT_BUS_WIDTH_4BIT; break; + case MMC_BUS_WIDTH_8: + host->cmdat &= ~JZ_MMC_CMDAT_BUS_WIDTH_MASK; + host->cmdat |= JZ_MMC_CMDAT_BUS_WIDTH_8BIT; + break; default: break; } @@ -924,7 +956,9 @@ static const struct mmc_host_ops jz4740_mmc_ops = { static const struct of_device_id jz4740_mmc_of_match[] = { { .compatible = "ingenic,jz4740-mmc", .data = (void *) JZ_MMC_JZ4740 }, { .compatible = "ingenic,jz4725b-mmc", .data = (void *)JZ_MMC_JZ4725B }, + { .compatible = "ingenic,jz4760-mmc", .data = (void *) JZ_MMC_JZ4760 }, { .compatible = "ingenic,jz4780-mmc", .data = (void *) JZ_MMC_JZ4780 }, + { .compatible = "ingenic,x1000-mmc", .data = (void *) JZ_MMC_X1000 }, {}, }; MODULE_DEVICE_TABLE(of, jz4740_mmc_of_match); @@ -1025,11 +1059,12 @@ static int jz4740_mmc_probe(struct platform_device* pdev) dev_err(&pdev->dev, "Failed to add mmc host: %d\n", ret); goto err_release_dma; } - dev_info(&pdev->dev, "JZ SD/MMC card driver registered\n"); + dev_info(&pdev->dev, "Ingenic SD/MMC card driver registered\n"); dev_info(&pdev->dev, "Using %s, %d-bit mode\n", host->use_dma ? "DMA" : "PIO", - (mmc->caps & MMC_CAP_4_BIT_DATA) ? 4 : 1); + (mmc->caps & MMC_CAP_8_BIT_DATA) ? 8 : + ((mmc->caps & MMC_CAP_4_BIT_DATA) ? 4 : 1)); return 0; diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index 66e354d51ee9..74c6cfbf9172 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -1421,7 +1421,7 @@ static int mmc_spi_probe(struct spi_device *spi) * Index 0 is card detect * Old boardfiles were specifying 1 ms as debounce */ - status = mmc_gpiod_request_cd(mmc, NULL, 0, false, 1, NULL); + status = mmc_gpiod_request_cd(mmc, NULL, 0, false, 1000, NULL); if (status == -EPROBE_DEFER) goto fail_add_host; if (!status) { diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index c37e70dbe250..40e72c30ea84 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -44,6 +44,7 @@ #define DRIVER_NAME "mmci-pl18x" static void mmci_variant_init(struct mmci_host *host); +static void ux500_variant_init(struct mmci_host *host); static void ux500v2_variant_init(struct mmci_host *host); static unsigned int fmax = 515633; @@ -184,7 +185,7 @@ static struct variant_data variant_ux500 = { .irq_pio_mask = MCI_IRQ_PIO_MASK, .start_err = MCI_STARTBITERR, .opendrain = MCI_OD, - .init = mmci_variant_init, + .init = ux500_variant_init, }; static struct variant_data variant_ux500v2 = { @@ -261,6 +262,10 @@ static struct variant_data variant_stm32_sdmmc = { .datalength_bits = 25, .datactrl_blocksz = 14, .stm32_idmabsize_mask = GENMASK(12, 5), + .busy_timeout = true, + .busy_detect = true, + .busy_detect_flag = MCI_STM32_BUSYD0, + .busy_detect_mask = MCI_STM32_BUSYD0ENDMASK, .init = sdmmc_variant_init, }; @@ -419,7 +424,7 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired) mmci_write_clkreg(host, clk); } -void mmci_dma_release(struct mmci_host *host) +static void mmci_dma_release(struct mmci_host *host) { if (host->ops && host->ops->dma_release) host->ops->dma_release(host); @@ -427,7 +432,7 @@ void mmci_dma_release(struct mmci_host *host) host->use_dma = false; } -void mmci_dma_setup(struct mmci_host *host) +static void mmci_dma_setup(struct mmci_host *host) { if (!host->ops || !host->ops->dma_setup) return; @@ -462,7 +467,7 @@ static int mmci_validate_data(struct mmci_host *host, return 0; } -int mmci_prep_data(struct mmci_host *host, struct mmc_data *data, bool next) +static int mmci_prep_data(struct mmci_host *host, struct mmc_data *data, bool next) { int err; @@ -478,7 +483,7 @@ int mmci_prep_data(struct mmci_host *host, struct mmc_data *data, bool next) return err; } -void mmci_unprep_data(struct mmci_host *host, struct mmc_data *data, +static void mmci_unprep_data(struct mmci_host *host, struct mmc_data *data, int err) { if (host->ops && host->ops->unprep_data) @@ -487,7 +492,7 @@ void mmci_unprep_data(struct mmci_host *host, struct mmc_data *data, data->host_cookie = 0; } -void mmci_get_next_data(struct mmci_host *host, struct mmc_data *data) +static void mmci_get_next_data(struct mmci_host *host, struct mmc_data *data) { WARN_ON(data->host_cookie && data->host_cookie != host->next_cookie); @@ -495,7 +500,7 @@ void mmci_get_next_data(struct mmci_host *host, struct mmc_data *data) host->ops->get_next_data(host, data); } -int mmci_dma_start(struct mmci_host *host, unsigned int datactrl) +static int mmci_dma_start(struct mmci_host *host, unsigned int datactrl) { struct mmc_data *data = host->data; int ret; @@ -530,7 +535,7 @@ int mmci_dma_start(struct mmci_host *host, unsigned int datactrl) return 0; } -void mmci_dma_finalize(struct mmci_host *host, struct mmc_data *data) +static void mmci_dma_finalize(struct mmci_host *host, struct mmc_data *data) { if (!host->use_dma) return; @@ -539,7 +544,7 @@ void mmci_dma_finalize(struct mmci_host *host, struct mmc_data *data) host->ops->dma_finalize(host, data); } -void mmci_dma_error(struct mmci_host *host) +static void mmci_dma_error(struct mmci_host *host) { if (!host->use_dma) return; @@ -610,6 +615,67 @@ static u32 ux500v2_get_dctrl_cfg(struct mmci_host *host) return MCI_DPSM_ENABLE | (host->data->blksz << 16); } +static bool ux500_busy_complete(struct mmci_host *host, u32 status, u32 err_msk) +{ + void __iomem *base = host->base; + + /* + * Before unmasking for the busy end IRQ, confirm that the + * command was sent successfully. To keep track of having a + * command in-progress, waiting for busy signaling to end, + * store the status in host->busy_status. + * + * Note that, the card may need a couple of clock cycles before + * it starts signaling busy on DAT0, hence re-read the + * MMCISTATUS register here, to allow the busy bit to be set. + * Potentially we may even need to poll the register for a + * while, to allow it to be set, but tests indicates that it + * isn't needed. + */ + if (!host->busy_status && !(status & err_msk) && + (readl(base + MMCISTATUS) & host->variant->busy_detect_flag)) { + writel(readl(base + MMCIMASK0) | + host->variant->busy_detect_mask, + base + MMCIMASK0); + + host->busy_status = status & (MCI_CMDSENT | MCI_CMDRESPEND); + return false; + } + + /* + * If there is a command in-progress that has been successfully + * sent, then bail out if busy status is set and wait for the + * busy end IRQ. + * + * Note that, the HW triggers an IRQ on both edges while + * monitoring DAT0 for busy completion, but there is only one + * status bit in MMCISTATUS for the busy state. Therefore + * both the start and the end interrupts needs to be cleared, + * one after the other. So, clear the busy start IRQ here. + */ + if (host->busy_status && + (status & host->variant->busy_detect_flag)) { + writel(host->variant->busy_detect_mask, base + MMCICLEAR); + return false; + } + + /* + * If there is a command in-progress that has been successfully + * sent and the busy bit isn't set, it means we have received + * the busy end IRQ. Clear and mask the IRQ, then continue to + * process the command. + */ + if (host->busy_status) { + writel(host->variant->busy_detect_mask, base + MMCICLEAR); + + writel(readl(base + MMCIMASK0) & + ~host->variant->busy_detect_mask, base + MMCIMASK0); + host->busy_status = 0; + } + + return true; +} + /* * All the DMA operation mode stuff goes inside this ifdef. * This assumes that you have a generic DMA device interface, @@ -948,14 +1014,21 @@ static struct mmci_host_ops mmci_variant_ops = { }; #endif -void mmci_variant_init(struct mmci_host *host) +static void mmci_variant_init(struct mmci_host *host) +{ + host->ops = &mmci_variant_ops; +} + +static void ux500_variant_init(struct mmci_host *host) { host->ops = &mmci_variant_ops; + host->ops->busy_complete = ux500_busy_complete; } -void ux500v2_variant_init(struct mmci_host *host) +static void ux500v2_variant_init(struct mmci_host *host) { host->ops = &mmci_variant_ops; + host->ops->busy_complete = ux500_busy_complete; host->ops->get_datactrl_cfg = ux500v2_get_dctrl_cfg; } @@ -1075,6 +1148,7 @@ static void mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c) { void __iomem *base = host->base; + unsigned long long clks; dev_dbg(mmc_dev(host->mmc), "op %02x arg %08x flags %08x\n", cmd->opcode, cmd->arg, cmd->flags); @@ -1097,6 +1171,16 @@ mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c) else c |= host->variant->cmdreg_srsp; } + + if (host->variant->busy_timeout && cmd->flags & MMC_RSP_BUSY) { + if (!cmd->busy_timeout) + cmd->busy_timeout = 10 * MSEC_PER_SEC; + + clks = (unsigned long long)cmd->busy_timeout * host->cclk; + do_div(clks, MSEC_PER_SEC); + writel_relaxed(clks, host->base + MMCIDATATIMER); + } + if (/*interrupt*/0) c |= MCI_CPSM_INTERRUPT; @@ -1201,6 +1285,7 @@ static void mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, unsigned int status) { + u32 err_msk = MCI_CMDCRCFAIL | MCI_CMDTIMEOUT; void __iomem *base = host->base; bool sbc, busy_resp; @@ -1215,74 +1300,17 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, * handling. Note that we tag on any latent IRQs postponed * due to waiting for busy status. */ - if (!((status|host->busy_status) & - (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT|MCI_CMDSENT|MCI_CMDRESPEND))) + if (host->variant->busy_timeout && busy_resp) + err_msk |= MCI_DATATIMEOUT; + + if (!((status | host->busy_status) & + (err_msk | MCI_CMDSENT | MCI_CMDRESPEND))) return; /* Handle busy detection on DAT0 if the variant supports it. */ - if (busy_resp && host->variant->busy_detect) { - - /* - * Before unmasking for the busy end IRQ, confirm that the - * command was sent successfully. To keep track of having a - * command in-progress, waiting for busy signaling to end, - * store the status in host->busy_status. - * - * Note that, the card may need a couple of clock cycles before - * it starts signaling busy on DAT0, hence re-read the - * MMCISTATUS register here, to allow the busy bit to be set. - * Potentially we may even need to poll the register for a - * while, to allow it to be set, but tests indicates that it - * isn't needed. - */ - if (!host->busy_status && - !(status & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT)) && - (readl(base + MMCISTATUS) & host->variant->busy_detect_flag)) { - - writel(readl(base + MMCIMASK0) | - host->variant->busy_detect_mask, - base + MMCIMASK0); - - host->busy_status = - status & (MCI_CMDSENT|MCI_CMDRESPEND); - return; - } - - /* - * If there is a command in-progress that has been successfully - * sent, then bail out if busy status is set and wait for the - * busy end IRQ. - * - * Note that, the HW triggers an IRQ on both edges while - * monitoring DAT0 for busy completion, but there is only one - * status bit in MMCISTATUS for the busy state. Therefore - * both the start and the end interrupts needs to be cleared, - * one after the other. So, clear the busy start IRQ here. - */ - if (host->busy_status && - (status & host->variant->busy_detect_flag)) { - writel(host->variant->busy_detect_mask, - host->base + MMCICLEAR); + if (busy_resp && host->variant->busy_detect) + if (!host->ops->busy_complete(host, status, err_msk)) return; - } - - /* - * If there is a command in-progress that has been successfully - * sent and the busy bit isn't set, it means we have received - * the busy end IRQ. Clear and mask the IRQ, then continue to - * process the command. - */ - if (host->busy_status) { - - writel(host->variant->busy_detect_mask, - host->base + MMCICLEAR); - - writel(readl(base + MMCIMASK0) & - ~host->variant->busy_detect_mask, - base + MMCIMASK0); - host->busy_status = 0; - } - } host->cmd = NULL; @@ -1290,6 +1318,9 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, cmd->error = -ETIMEDOUT; } else if (status & MCI_CMDCRCFAIL && cmd->flags & MMC_RSP_CRC) { cmd->error = -EILSEQ; + } else if (host->variant->busy_timeout && busy_resp && + status & MCI_DATATIMEOUT) { + cmd->error = -ETIMEDOUT; } else { cmd->resp[0] = readl(base + MMCIRESPONSE0); cmd->resp[1] = readl(base + MMCIRESPONSE1); @@ -1583,6 +1614,20 @@ static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq) spin_unlock_irqrestore(&host->lock, flags); } +static void mmci_set_max_busy_timeout(struct mmc_host *mmc) +{ + struct mmci_host *host = mmc_priv(mmc); + u32 max_busy_timeout = 0; + + if (!host->variant->busy_detect) + return; + + if (host->variant->busy_timeout && mmc->actual_clock) + max_busy_timeout = ~0UL / (mmc->actual_clock / MSEC_PER_SEC); + + mmc->max_busy_timeout = max_busy_timeout; +} + static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { struct mmci_host *host = mmc_priv(mmc); @@ -1687,6 +1732,8 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) else mmci_set_clkreg(host, ios->clock); + mmci_set_max_busy_timeout(mmc); + if (host->ops && host->ops->set_pwrreg) host->ops->set_pwrreg(host, pwr); else @@ -1957,7 +2004,6 @@ static int mmci_probe(struct amba_device *dev, mmci_write_datactrlreg(host, host->variant->busy_dpsm_flag); mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY; - mmc->max_busy_timeout = 0; } /* Prepare a CMD12 - needed to clear the DPSM on some variants. */ diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index 833236ecb31e..158e1231aa23 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -164,6 +164,7 @@ #define MCI_ST_CARDBUSY (1 << 24) /* Extended status bits for the STM32 variants */ #define MCI_STM32_BUSYD0 BIT(20) +#define MCI_STM32_BUSYD0END BIT(21) #define MMCICLEAR 0x038 #define MCI_CMDCRCFAILCLR (1 << 0) @@ -287,6 +288,8 @@ struct mmci_host; * @signal_direction: input/out direction of bus signals can be indicated * @pwrreg_clkgate: MMCIPOWER register must be used to gate the clock * @busy_detect: true if the variant supports busy detection on DAT0. + * @busy_timeout: true if the variant starts data timer when the DPSM + * enter in Wait_R or Busy state. * @busy_dpsm_flag: bitmask enabling busy detection in the DPSM * @busy_detect_flag: bitmask identifying the bit in the MMCISTATUS register * indicating that the card is busy @@ -333,6 +336,7 @@ struct variant_data { u8 signal_direction:1; u8 pwrreg_clkgate:1; u8 busy_detect:1; + u8 busy_timeout:1; u32 busy_dpsm_flag; u32 busy_detect_flag; u32 busy_detect_mask; @@ -366,6 +370,7 @@ struct mmci_host_ops { void (*dma_error)(struct mmci_host *host); void (*set_clkreg)(struct mmci_host *host, unsigned int desired); void (*set_pwrreg)(struct mmci_host *host, unsigned int pwr); + bool (*busy_complete)(struct mmci_host *host, u32 status, u32 err_msk); }; struct mmci_host { diff --git a/drivers/mmc/host/mmci_stm32_sdmmc.c b/drivers/mmc/host/mmci_stm32_sdmmc.c index 8e83ae6920ae..a4f7e8e689d3 100644 --- a/drivers/mmc/host/mmci_stm32_sdmmc.c +++ b/drivers/mmc/host/mmci_stm32_sdmmc.c @@ -25,8 +25,8 @@ struct sdmmc_priv { void *sg_cpu; }; -int sdmmc_idma_validate_data(struct mmci_host *host, - struct mmc_data *data) +static int sdmmc_idma_validate_data(struct mmci_host *host, + struct mmc_data *data) { struct scatterlist *sg; int i; @@ -282,6 +282,47 @@ static u32 sdmmc_get_dctrl_cfg(struct mmci_host *host) return datactrl; } +static bool sdmmc_busy_complete(struct mmci_host *host, u32 status, u32 err_msk) +{ + void __iomem *base = host->base; + u32 busy_d0, busy_d0end, mask, sdmmc_status; + + mask = readl_relaxed(base + MMCIMASK0); + sdmmc_status = readl_relaxed(base + MMCISTATUS); + busy_d0end = sdmmc_status & MCI_STM32_BUSYD0END; + busy_d0 = sdmmc_status & MCI_STM32_BUSYD0; + + /* complete if there is an error or busy_d0end */ + if ((status & err_msk) || busy_d0end) + goto complete; + + /* + * On response the busy signaling is reflected in the BUSYD0 flag. + * if busy_d0 is in-progress we must activate busyd0end interrupt + * to wait this completion. Else this request has no busy step. + */ + if (busy_d0) { + if (!host->busy_status) { + writel_relaxed(mask | host->variant->busy_detect_mask, + base + MMCIMASK0); + host->busy_status = status & + (MCI_CMDSENT | MCI_CMDRESPEND); + } + return false; + } + +complete: + if (host->busy_status) { + writel_relaxed(mask & ~host->variant->busy_detect_mask, + base + MMCIMASK0); + writel_relaxed(host->variant->busy_detect_mask, + base + MMCICLEAR); + host->busy_status = 0; + } + + return true; +} + static struct mmci_host_ops sdmmc_variant_ops = { .validate_data = sdmmc_idma_validate_data, .prep_data = sdmmc_idma_prep_data, @@ -292,6 +333,7 @@ static struct mmci_host_ops sdmmc_variant_ops = { .dma_finalize = sdmmc_idma_finalize, .set_clkreg = mmci_sdmmc_set_clkreg, .set_pwrreg = mmci_sdmmc_set_pwrreg, + .busy_complete = sdmmc_busy_complete, }; void sdmmc_variant_init(struct mmci_host *host) diff --git a/drivers/mmc/host/moxart-mmc.c b/drivers/mmc/host/moxart-mmc.c index a0670e9cd012..fc6b9cf27d0b 100644 --- a/drivers/mmc/host/moxart-mmc.c +++ b/drivers/mmc/host/moxart-mmc.c @@ -608,8 +608,8 @@ static int moxart_probe(struct platform_device *pdev) host->timeout = msecs_to_jiffies(1000); host->sysclk = clk_get_rate(clk); host->fifo_width = readl(host->base + REG_FEATURE) << 2; - host->dma_chan_tx = dma_request_slave_channel_reason(dev, "tx"); - host->dma_chan_rx = dma_request_slave_channel_reason(dev, "rx"); + host->dma_chan_tx = dma_request_chan(dev, "tx"); + host->dma_chan_rx = dma_request_chan(dev, "rx"); spin_lock_init(&host->lock); diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 952fa4063ff8..767e964ca5a2 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1510,8 +1510,35 @@ static void omap_hsmmc_init_card(struct mmc_host *mmc, struct mmc_card *card) { struct omap_hsmmc_host *host = mmc_priv(mmc); - if (mmc_pdata(host)->init_card) - mmc_pdata(host)->init_card(card); + if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) { + struct device_node *np = mmc_dev(mmc)->of_node; + + /* + * REVISIT: should be moved to sdio core and made more + * general e.g. by expanding the DT bindings of child nodes + * to provide a mechanism to provide this information: + * Documentation/devicetree/bindings/mmc/mmc-card.txt + */ + + np = of_get_compatible_child(np, "ti,wl1251"); + if (np) { + /* + * We have TI wl1251 attached to MMC3. Pass this + * information to the SDIO core because it can't be + * probed by normal methods. + */ + + dev_info(host->dev, "found wl1251\n"); + card->quirks |= MMC_QUIRK_NONSTD_SDIO; + card->cccr.wide_bus = 1; + card->cis.vendor = 0x104c; + card->cis.device = 0x9066; + card->cis.blksize = 512; + card->cis.max_dtr = 24000000; + card->ocr = 0x80; + of_node_put(np); + } + } } static void omap_hsmmc_enable_sdio_irq(struct mmc_host *mmc, int enable) diff --git a/drivers/mmc/host/owl-mmc.c b/drivers/mmc/host/owl-mmc.c new file mode 100644 index 000000000000..771e3d00f1bb --- /dev/null +++ b/drivers/mmc/host/owl-mmc.c @@ -0,0 +1,696 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Actions Semi Owl SoCs SD/MMC driver + * + * Copyright (c) 2014 Actions Semi Inc. + * Copyright (c) 2019 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + * + * TODO: SDIO support + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/dmaengine.h> +#include <linux/dma-direction.h> +#include <linux/dma-mapping.h> +#include <linux/interrupt.h> +#include <linux/mmc/host.h> +#include <linux/mmc/slot-gpio.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/reset.h> +#include <linux/spinlock.h> + +/* + * SDC registers + */ +#define OWL_REG_SD_EN 0x0000 +#define OWL_REG_SD_CTL 0x0004 +#define OWL_REG_SD_STATE 0x0008 +#define OWL_REG_SD_CMD 0x000c +#define OWL_REG_SD_ARG 0x0010 +#define OWL_REG_SD_RSPBUF0 0x0014 +#define OWL_REG_SD_RSPBUF1 0x0018 +#define OWL_REG_SD_RSPBUF2 0x001c +#define OWL_REG_SD_RSPBUF3 0x0020 +#define OWL_REG_SD_RSPBUF4 0x0024 +#define OWL_REG_SD_DAT 0x0028 +#define OWL_REG_SD_BLK_SIZE 0x002c +#define OWL_REG_SD_BLK_NUM 0x0030 +#define OWL_REG_SD_BUF_SIZE 0x0034 + +/* SD_EN Bits */ +#define OWL_SD_EN_RANE BIT(31) +#define OWL_SD_EN_RAN_SEED(x) (((x) & 0x3f) << 24) +#define OWL_SD_EN_S18EN BIT(12) +#define OWL_SD_EN_RESE BIT(10) +#define OWL_SD_EN_DAT1_S BIT(9) +#define OWL_SD_EN_CLK_S BIT(8) +#define OWL_SD_ENABLE BIT(7) +#define OWL_SD_EN_BSEL BIT(6) +#define OWL_SD_EN_SDIOEN BIT(3) +#define OWL_SD_EN_DDREN BIT(2) +#define OWL_SD_EN_DATAWID(x) (((x) & 0x3) << 0) + +/* SD_CTL Bits */ +#define OWL_SD_CTL_TOUTEN BIT(31) +#define OWL_SD_CTL_TOUTCNT(x) (((x) & 0x7f) << 24) +#define OWL_SD_CTL_DELAY_MSK GENMASK(23, 16) +#define OWL_SD_CTL_RDELAY(x) (((x) & 0xf) << 20) +#define OWL_SD_CTL_WDELAY(x) (((x) & 0xf) << 16) +#define OWL_SD_CTL_CMDLEN BIT(13) +#define OWL_SD_CTL_SCC BIT(12) +#define OWL_SD_CTL_TCN(x) (((x) & 0xf) << 8) +#define OWL_SD_CTL_TS BIT(7) +#define OWL_SD_CTL_LBE BIT(6) +#define OWL_SD_CTL_C7EN BIT(5) +#define OWL_SD_CTL_TM(x) (((x) & 0xf) << 0) + +#define OWL_SD_DELAY_LOW_CLK 0x0f +#define OWL_SD_DELAY_MID_CLK 0x0a +#define OWL_SD_DELAY_HIGH_CLK 0x09 +#define OWL_SD_RDELAY_DDR50 0x0a +#define OWL_SD_WDELAY_DDR50 0x08 + +/* SD_STATE Bits */ +#define OWL_SD_STATE_DAT1BS BIT(18) +#define OWL_SD_STATE_SDIOB_P BIT(17) +#define OWL_SD_STATE_SDIOB_EN BIT(16) +#define OWL_SD_STATE_TOUTE BIT(15) +#define OWL_SD_STATE_BAEP BIT(14) +#define OWL_SD_STATE_MEMRDY BIT(12) +#define OWL_SD_STATE_CMDS BIT(11) +#define OWL_SD_STATE_DAT1AS BIT(10) +#define OWL_SD_STATE_SDIOA_P BIT(9) +#define OWL_SD_STATE_SDIOA_EN BIT(8) +#define OWL_SD_STATE_DAT0S BIT(7) +#define OWL_SD_STATE_TEIE BIT(6) +#define OWL_SD_STATE_TEI BIT(5) +#define OWL_SD_STATE_CLNR BIT(4) +#define OWL_SD_STATE_CLC BIT(3) +#define OWL_SD_STATE_WC16ER BIT(2) +#define OWL_SD_STATE_RC16ER BIT(1) +#define OWL_SD_STATE_CRC7ER BIT(0) + +struct owl_mmc_host { + struct device *dev; + struct reset_control *reset; + void __iomem *base; + struct clk *clk; + struct completion sdc_complete; + spinlock_t lock; + int irq; + u32 clock; + bool ddr_50; + + enum dma_data_direction dma_dir; + struct dma_chan *dma; + struct dma_async_tx_descriptor *desc; + struct dma_slave_config dma_cfg; + struct completion dma_complete; + + struct mmc_host *mmc; + struct mmc_request *mrq; + struct mmc_command *cmd; + struct mmc_data *data; +}; + +static void owl_mmc_update_reg(void __iomem *reg, unsigned int val, bool state) +{ + unsigned int regval; + + regval = readl(reg); + + if (state) + regval |= val; + else + regval &= ~val; + + writel(regval, reg); +} + +static irqreturn_t owl_irq_handler(int irq, void *devid) +{ + struct owl_mmc_host *owl_host = devid; + unsigned long flags; + u32 state; + + spin_lock_irqsave(&owl_host->lock, flags); + + state = readl(owl_host->base + OWL_REG_SD_STATE); + if (state & OWL_SD_STATE_TEI) { + state = readl(owl_host->base + OWL_REG_SD_STATE); + state |= OWL_SD_STATE_TEI; + writel(state, owl_host->base + OWL_REG_SD_STATE); + complete(&owl_host->sdc_complete); + } + + spin_unlock_irqrestore(&owl_host->lock, flags); + + return IRQ_HANDLED; +} + +static void owl_mmc_finish_request(struct owl_mmc_host *owl_host) +{ + struct mmc_request *mrq = owl_host->mrq; + struct mmc_data *data = mrq->data; + + /* Should never be NULL */ + WARN_ON(!mrq); + + owl_host->mrq = NULL; + + if (data) + dma_unmap_sg(owl_host->dma->device->dev, data->sg, data->sg_len, + owl_host->dma_dir); + + /* Finally finish request */ + mmc_request_done(owl_host->mmc, mrq); +} + +static void owl_mmc_send_cmd(struct owl_mmc_host *owl_host, + struct mmc_command *cmd, + struct mmc_data *data) +{ + u32 mode, state, resp[2]; + u32 cmd_rsp_mask = 0; + + init_completion(&owl_host->sdc_complete); + + switch (mmc_resp_type(cmd)) { + case MMC_RSP_NONE: + mode = OWL_SD_CTL_TM(0); + break; + + case MMC_RSP_R1: + if (data) { + if (data->flags & MMC_DATA_READ) + mode = OWL_SD_CTL_TM(4); + else + mode = OWL_SD_CTL_TM(5); + } else { + mode = OWL_SD_CTL_TM(1); + } + cmd_rsp_mask = OWL_SD_STATE_CLNR | OWL_SD_STATE_CRC7ER; + + break; + + case MMC_RSP_R1B: + mode = OWL_SD_CTL_TM(3); + cmd_rsp_mask = OWL_SD_STATE_CLNR | OWL_SD_STATE_CRC7ER; + break; + + case MMC_RSP_R2: + mode = OWL_SD_CTL_TM(2); + cmd_rsp_mask = OWL_SD_STATE_CLNR | OWL_SD_STATE_CRC7ER; + break; + + case MMC_RSP_R3: + mode = OWL_SD_CTL_TM(1); + cmd_rsp_mask = OWL_SD_STATE_CLNR; + break; + + default: + dev_warn(owl_host->dev, "Unknown MMC command\n"); + cmd->error = -EINVAL; + return; + } + + /* Keep current WDELAY and RDELAY */ + mode |= (readl(owl_host->base + OWL_REG_SD_CTL) & (0xff << 16)); + + /* Start to send corresponding command type */ + writel(cmd->arg, owl_host->base + OWL_REG_SD_ARG); + writel(cmd->opcode, owl_host->base + OWL_REG_SD_CMD); + + /* Set LBE to send clk at the end of last read block */ + if (data) { + mode |= (OWL_SD_CTL_TS | OWL_SD_CTL_LBE | 0x64000000); + } else { + mode &= ~(OWL_SD_CTL_TOUTEN | OWL_SD_CTL_LBE); + mode |= OWL_SD_CTL_TS; + } + + owl_host->cmd = cmd; + + /* Start transfer */ + writel(mode, owl_host->base + OWL_REG_SD_CTL); + + if (data) + return; + + if (!wait_for_completion_timeout(&owl_host->sdc_complete, 30 * HZ)) { + dev_err(owl_host->dev, "CMD interrupt timeout\n"); + cmd->error = -ETIMEDOUT; + return; + } + + state = readl(owl_host->base + OWL_REG_SD_STATE); + if (mmc_resp_type(cmd) & MMC_RSP_PRESENT) { + if (cmd_rsp_mask & state) { + if (state & OWL_SD_STATE_CLNR) { + dev_err(owl_host->dev, "Error CMD_NO_RSP\n"); + cmd->error = -EILSEQ; + return; + } + + if (state & OWL_SD_STATE_CRC7ER) { + dev_err(owl_host->dev, "Error CMD_RSP_CRC\n"); + cmd->error = -EILSEQ; + return; + } + } + + if (mmc_resp_type(cmd) & MMC_RSP_136) { + cmd->resp[3] = readl(owl_host->base + OWL_REG_SD_RSPBUF0); + cmd->resp[2] = readl(owl_host->base + OWL_REG_SD_RSPBUF1); + cmd->resp[1] = readl(owl_host->base + OWL_REG_SD_RSPBUF2); + cmd->resp[0] = readl(owl_host->base + OWL_REG_SD_RSPBUF3); + } else { + resp[0] = readl(owl_host->base + OWL_REG_SD_RSPBUF0); + resp[1] = readl(owl_host->base + OWL_REG_SD_RSPBUF1); + cmd->resp[0] = resp[1] << 24 | resp[0] >> 8; + cmd->resp[1] = resp[1] >> 8; + } + } +} + +static void owl_mmc_dma_complete(void *param) +{ + struct owl_mmc_host *owl_host = param; + struct mmc_data *data = owl_host->data; + + if (data) + complete(&owl_host->dma_complete); +} + +static int owl_mmc_prepare_data(struct owl_mmc_host *owl_host, + struct mmc_data *data) +{ + u32 total; + + owl_mmc_update_reg(owl_host->base + OWL_REG_SD_EN, OWL_SD_EN_BSEL, + true); + writel(data->blocks, owl_host->base + OWL_REG_SD_BLK_NUM); + writel(data->blksz, owl_host->base + OWL_REG_SD_BLK_SIZE); + total = data->blksz * data->blocks; + + if (total < 512) + writel(total, owl_host->base + OWL_REG_SD_BUF_SIZE); + else + writel(512, owl_host->base + OWL_REG_SD_BUF_SIZE); + + if (data->flags & MMC_DATA_WRITE) { + owl_host->dma_dir = DMA_TO_DEVICE; + owl_host->dma_cfg.direction = DMA_MEM_TO_DEV; + } else { + owl_host->dma_dir = DMA_FROM_DEVICE; + owl_host->dma_cfg.direction = DMA_DEV_TO_MEM; + } + + dma_map_sg(owl_host->dma->device->dev, data->sg, + data->sg_len, owl_host->dma_dir); + + dmaengine_slave_config(owl_host->dma, &owl_host->dma_cfg); + owl_host->desc = dmaengine_prep_slave_sg(owl_host->dma, data->sg, + data->sg_len, + owl_host->dma_cfg.direction, + DMA_PREP_INTERRUPT | + DMA_CTRL_ACK); + if (!owl_host->desc) { + dev_err(owl_host->dev, "Can't prepare slave sg\n"); + return -EBUSY; + } + + owl_host->data = data; + + owl_host->desc->callback = owl_mmc_dma_complete; + owl_host->desc->callback_param = (void *)owl_host; + data->error = 0; + + return 0; +} + +static void owl_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct owl_mmc_host *owl_host = mmc_priv(mmc); + struct mmc_data *data = mrq->data; + int ret; + + owl_host->mrq = mrq; + if (mrq->data) { + ret = owl_mmc_prepare_data(owl_host, data); + if (ret < 0) { + data->error = ret; + goto err_out; + } + + init_completion(&owl_host->dma_complete); + dmaengine_submit(owl_host->desc); + dma_async_issue_pending(owl_host->dma); + } + + owl_mmc_send_cmd(owl_host, mrq->cmd, data); + + if (data) { + if (!wait_for_completion_timeout(&owl_host->sdc_complete, + 10 * HZ)) { + dev_err(owl_host->dev, "CMD interrupt timeout\n"); + mrq->cmd->error = -ETIMEDOUT; + dmaengine_terminate_all(owl_host->dma); + goto err_out; + } + + if (!wait_for_completion_timeout(&owl_host->dma_complete, + 5 * HZ)) { + dev_err(owl_host->dev, "DMA interrupt timeout\n"); + mrq->cmd->error = -ETIMEDOUT; + dmaengine_terminate_all(owl_host->dma); + goto err_out; + } + + if (data->stop) + owl_mmc_send_cmd(owl_host, data->stop, NULL); + + data->bytes_xfered = data->blocks * data->blksz; + } + +err_out: + owl_mmc_finish_request(owl_host); +} + +static int owl_mmc_set_clk_rate(struct owl_mmc_host *owl_host, + unsigned int rate) +{ + unsigned long clk_rate; + int ret; + u32 reg; + + reg = readl(owl_host->base + OWL_REG_SD_CTL); + reg &= ~OWL_SD_CTL_DELAY_MSK; + + /* Set RDELAY and WDELAY based on the clock */ + if (rate <= 1000000) { + writel(reg | OWL_SD_CTL_RDELAY(OWL_SD_DELAY_LOW_CLK) | + OWL_SD_CTL_WDELAY(OWL_SD_DELAY_LOW_CLK), + owl_host->base + OWL_REG_SD_CTL); + } else if ((rate > 1000000) && (rate <= 26000000)) { + writel(reg | OWL_SD_CTL_RDELAY(OWL_SD_DELAY_MID_CLK) | + OWL_SD_CTL_WDELAY(OWL_SD_DELAY_MID_CLK), + owl_host->base + OWL_REG_SD_CTL); + } else if ((rate > 26000000) && (rate <= 52000000) && !owl_host->ddr_50) { + writel(reg | OWL_SD_CTL_RDELAY(OWL_SD_DELAY_HIGH_CLK) | + OWL_SD_CTL_WDELAY(OWL_SD_DELAY_HIGH_CLK), + owl_host->base + OWL_REG_SD_CTL); + /* DDR50 mode has special delay chain */ + } else if ((rate > 26000000) && (rate <= 52000000) && owl_host->ddr_50) { + writel(reg | OWL_SD_CTL_RDELAY(OWL_SD_RDELAY_DDR50) | + OWL_SD_CTL_WDELAY(OWL_SD_WDELAY_DDR50), + owl_host->base + OWL_REG_SD_CTL); + } else { + dev_err(owl_host->dev, "SD clock rate not supported\n"); + return -EINVAL; + } + + clk_rate = clk_round_rate(owl_host->clk, rate << 1); + ret = clk_set_rate(owl_host->clk, clk_rate); + + return ret; +} + +static void owl_mmc_set_clk(struct owl_mmc_host *owl_host, struct mmc_ios *ios) +{ + if (!ios->clock) + return; + + owl_host->clock = ios->clock; + owl_mmc_set_clk_rate(owl_host, ios->clock); +} + +static void owl_mmc_set_bus_width(struct owl_mmc_host *owl_host, + struct mmc_ios *ios) +{ + u32 reg; + + reg = readl(owl_host->base + OWL_REG_SD_EN); + reg &= ~0x03; + switch (ios->bus_width) { + case MMC_BUS_WIDTH_1: + break; + case MMC_BUS_WIDTH_4: + reg |= OWL_SD_EN_DATAWID(1); + break; + case MMC_BUS_WIDTH_8: + reg |= OWL_SD_EN_DATAWID(2); + break; + } + + writel(reg, owl_host->base + OWL_REG_SD_EN); +} + +static void owl_mmc_ctr_reset(struct owl_mmc_host *owl_host) +{ + reset_control_assert(owl_host->reset); + udelay(20); + reset_control_deassert(owl_host->reset); +} + +static void owl_mmc_power_on(struct owl_mmc_host *owl_host) +{ + u32 mode; + + init_completion(&owl_host->sdc_complete); + + /* Enable transfer end IRQ */ + owl_mmc_update_reg(owl_host->base + OWL_REG_SD_STATE, + OWL_SD_STATE_TEIE, true); + + /* Send init clk */ + mode = (readl(owl_host->base + OWL_REG_SD_CTL) & (0xff << 16)); + mode |= OWL_SD_CTL_TS | OWL_SD_CTL_TCN(5) | OWL_SD_CTL_TM(8); + writel(mode, owl_host->base + OWL_REG_SD_CTL); + + if (!wait_for_completion_timeout(&owl_host->sdc_complete, HZ)) { + dev_err(owl_host->dev, "CMD interrupt timeout\n"); + return; + } +} + +static void owl_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct owl_mmc_host *owl_host = mmc_priv(mmc); + + switch (ios->power_mode) { + case MMC_POWER_UP: + dev_dbg(owl_host->dev, "Powering card up\n"); + + /* Reset the SDC controller to clear all previous states */ + owl_mmc_ctr_reset(owl_host); + clk_prepare_enable(owl_host->clk); + writel(OWL_SD_ENABLE | OWL_SD_EN_RESE, + owl_host->base + OWL_REG_SD_EN); + + break; + + case MMC_POWER_ON: + dev_dbg(owl_host->dev, "Powering card on\n"); + owl_mmc_power_on(owl_host); + + break; + + case MMC_POWER_OFF: + dev_dbg(owl_host->dev, "Powering card off\n"); + clk_disable_unprepare(owl_host->clk); + + return; + + default: + dev_dbg(owl_host->dev, "Ignoring unknown card power state\n"); + break; + } + + if (ios->clock != owl_host->clock) + owl_mmc_set_clk(owl_host, ios); + + owl_mmc_set_bus_width(owl_host, ios); + + /* Enable DDR mode if requested */ + if (ios->timing == MMC_TIMING_UHS_DDR50) { + owl_host->ddr_50 = 1; + owl_mmc_update_reg(owl_host->base + OWL_REG_SD_EN, + OWL_SD_EN_DDREN, true); + } else { + owl_host->ddr_50 = 0; + } +} + +static int owl_mmc_start_signal_voltage_switch(struct mmc_host *mmc, + struct mmc_ios *ios) +{ + struct owl_mmc_host *owl_host = mmc_priv(mmc); + + /* It is enough to change the pad ctrl bit for voltage switch */ + switch (ios->signal_voltage) { + case MMC_SIGNAL_VOLTAGE_330: + owl_mmc_update_reg(owl_host->base + OWL_REG_SD_EN, + OWL_SD_EN_S18EN, false); + break; + case MMC_SIGNAL_VOLTAGE_180: + owl_mmc_update_reg(owl_host->base + OWL_REG_SD_EN, + OWL_SD_EN_S18EN, true); + break; + default: + return -ENOTSUPP; + } + + return 0; +} + +static const struct mmc_host_ops owl_mmc_ops = { + .request = owl_mmc_request, + .set_ios = owl_mmc_set_ios, + .get_ro = mmc_gpio_get_ro, + .get_cd = mmc_gpio_get_cd, + .start_signal_voltage_switch = owl_mmc_start_signal_voltage_switch, +}; + +static int owl_mmc_probe(struct platform_device *pdev) +{ + struct owl_mmc_host *owl_host; + struct mmc_host *mmc; + struct resource *res; + int ret; + + mmc = mmc_alloc_host(sizeof(struct owl_mmc_host), &pdev->dev); + if (!mmc) { + dev_err(&pdev->dev, "mmc alloc host failed\n"); + return -ENOMEM; + } + platform_set_drvdata(pdev, mmc); + + owl_host = mmc_priv(mmc); + owl_host->dev = &pdev->dev; + owl_host->mmc = mmc; + spin_lock_init(&owl_host->lock); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + owl_host->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(owl_host->base)) { + dev_err(&pdev->dev, "Failed to remap registers\n"); + ret = PTR_ERR(owl_host->base); + goto err_free_host; + } + + owl_host->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(owl_host->clk)) { + dev_err(&pdev->dev, "No clock defined\n"); + ret = PTR_ERR(owl_host->clk); + goto err_free_host; + } + + owl_host->reset = devm_reset_control_get_exclusive(&pdev->dev, NULL); + if (IS_ERR(owl_host->reset)) { + dev_err(&pdev->dev, "Could not get reset control\n"); + ret = PTR_ERR(owl_host->reset); + goto err_free_host; + } + + mmc->ops = &owl_mmc_ops; + mmc->max_blk_count = 512; + mmc->max_blk_size = 512; + mmc->max_segs = 256; + mmc->max_seg_size = 262144; + mmc->max_req_size = 262144; + /* 100kHz ~ 52MHz */ + mmc->f_min = 100000; + mmc->f_max = 52000000; + mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | + MMC_CAP_4_BIT_DATA; + mmc->caps2 = (MMC_CAP2_BOOTPART_NOACC | MMC_CAP2_NO_SDIO); + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34 | + MMC_VDD_165_195; + + ret = mmc_of_parse(mmc); + if (ret) + goto err_free_host; + + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + owl_host->dma = dma_request_slave_channel(&pdev->dev, "mmc"); + if (!owl_host->dma) { + dev_err(owl_host->dev, "Failed to get external DMA channel.\n"); + ret = -ENXIO; + goto err_free_host; + } + + dev_info(&pdev->dev, "Using %s for DMA transfers\n", + dma_chan_name(owl_host->dma)); + + owl_host->dma_cfg.src_addr = res->start + OWL_REG_SD_DAT; + owl_host->dma_cfg.dst_addr = res->start + OWL_REG_SD_DAT; + owl_host->dma_cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + owl_host->dma_cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + owl_host->dma_cfg.device_fc = false; + + owl_host->irq = platform_get_irq(pdev, 0); + if (owl_host->irq < 0) { + ret = -EINVAL; + goto err_free_host; + } + + ret = devm_request_irq(&pdev->dev, owl_host->irq, owl_irq_handler, + 0, dev_name(&pdev->dev), owl_host); + if (ret) { + dev_err(&pdev->dev, "Failed to request irq %d\n", + owl_host->irq); + goto err_free_host; + } + + ret = mmc_add_host(mmc); + if (ret) { + dev_err(&pdev->dev, "Failed to add host\n"); + goto err_free_host; + } + + dev_dbg(&pdev->dev, "Owl MMC Controller Initialized\n"); + + return 0; + +err_free_host: + mmc_free_host(mmc); + + return ret; +} + +static int owl_mmc_remove(struct platform_device *pdev) +{ + struct mmc_host *mmc = platform_get_drvdata(pdev); + struct owl_mmc_host *owl_host = mmc_priv(mmc); + + mmc_remove_host(mmc); + disable_irq(owl_host->irq); + mmc_free_host(mmc); + + return 0; +} + +static const struct of_device_id owl_mmc_of_match[] = { + {.compatible = "actions,owl-mmc",}, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, owl_mmc_of_match); + +static struct platform_driver owl_mmc_driver = { + .driver = { + .name = "owl_mmc", + .of_match_table = of_match_ptr(owl_mmc_of_match), + }, + .probe = owl_mmc_probe, + .remove = owl_mmc_remove, +}; +module_platform_driver(owl_mmc_driver); + +MODULE_DESCRIPTION("Actions Semi Owl SoCs SD/MMC Driver"); +MODULE_AUTHOR("Actions Semi"); +MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/renesas_sdhi_internal_dmac.c index a66f8d6d61d1..18839a10594c 100644 --- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c +++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c @@ -308,6 +308,7 @@ static const struct soc_device_attribute soc_whitelist[] = { .data = (void *)BIT(SDHI_INTERNAL_DMAC_ONE_RX_ONLY) }, /* generic ones */ { .soc_id = "r8a774a1" }, + { .soc_id = "r8a774b1" }, { .soc_id = "r8a774c0" }, { .soc_id = "r8a77470" }, { .soc_id = "r8a7795" }, diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c index 1604f512c7bd..105e73d4a3b9 100644 --- a/drivers/mmc/host/sdhci-acpi.c +++ b/drivers/mmc/host/sdhci-acpi.c @@ -61,7 +61,7 @@ struct sdhci_acpi_slot { mmc_pm_flag_t pm_caps; unsigned int flags; size_t priv_size; - int (*probe_slot)(struct platform_device *, const char *, const char *); + int (*probe_slot)(struct platform_device *, struct acpi_device *); int (*remove_slot)(struct platform_device *); int (*free_slot)(struct platform_device *pdev); int (*setup_host)(struct platform_device *pdev); @@ -325,12 +325,10 @@ static bool sdhci_acpi_cht_pci_wifi(unsigned int vendor, unsigned int device, * wifi card in the expected slot with an ACPI companion node, is used to * indicate that acpi_device_fix_up_power() should be avoided. */ -static inline bool sdhci_acpi_no_fixup_child_power(const char *hid, - const char *uid) +static inline bool sdhci_acpi_no_fixup_child_power(struct acpi_device *adev) { return sdhci_acpi_cht() && - !strcmp(hid, "80860F14") && - !strcmp(uid, "2") && + acpi_dev_hid_uid_match(adev, "80860F14", "2") && sdhci_acpi_cht_pci_wifi(0x14e4, 0x43ec, 0, 28); } @@ -345,8 +343,7 @@ static inline bool sdhci_acpi_byt_defer(struct device *dev) return false; } -static inline bool sdhci_acpi_no_fixup_child_power(const char *hid, - const char *uid) +static inline bool sdhci_acpi_no_fixup_child_power(struct acpi_device *adev) { return false; } @@ -375,19 +372,18 @@ out: return ret; } -static int intel_probe_slot(struct platform_device *pdev, const char *hid, - const char *uid) +static int intel_probe_slot(struct platform_device *pdev, struct acpi_device *adev) { struct sdhci_acpi_host *c = platform_get_drvdata(pdev); struct intel_host *intel_host = sdhci_acpi_priv(c); struct sdhci_host *host = c->host; - if (hid && uid && !strcmp(hid, "80860F14") && !strcmp(uid, "1") && + if (acpi_dev_hid_uid_match(adev, "80860F14", "1") && sdhci_readl(host, SDHCI_CAPABILITIES) == 0x446cc8b2 && sdhci_readl(host, SDHCI_CAPABILITIES_1) == 0x00000807) host->timeout_clk = 1000; /* 1000 kHz i.e. 1 MHz */ - if (hid && !strcmp(hid, "80865ACA")) + if (acpi_dev_hid_uid_match(adev, "80865ACA", NULL)) host->mmc_host_ops.get_cd = bxt_get_cd; intel_dsm_init(intel_host, &pdev->dev, host->mmc); @@ -473,8 +469,7 @@ static irqreturn_t sdhci_acpi_qcom_handler(int irq, void *ptr) return IRQ_HANDLED; } -static int qcom_probe_slot(struct platform_device *pdev, const char *hid, - const char *uid) +static int qcom_probe_slot(struct platform_device *pdev, struct acpi_device *adev) { struct sdhci_acpi_host *c = platform_get_drvdata(pdev); struct sdhci_host *host = c->host; @@ -482,7 +477,7 @@ static int qcom_probe_slot(struct platform_device *pdev, const char *hid, *irq = -EINVAL; - if (strcmp(hid, "QCOM8051")) + if (!acpi_dev_hid_uid_match(adev, "QCOM8051", NULL)) return 0; *irq = platform_get_irq(pdev, 1); @@ -501,14 +496,12 @@ static int qcom_free_slot(struct platform_device *pdev) struct sdhci_host *host = c->host; struct acpi_device *adev; int *irq = sdhci_acpi_priv(c); - const char *hid; adev = ACPI_COMPANION(dev); if (!adev) return -ENODEV; - hid = acpi_device_hid(adev); - if (strcmp(hid, "QCOM8051")) + if (!acpi_dev_hid_uid_match(adev, "QCOM8051", NULL)) return 0; if (*irq < 0) @@ -583,7 +576,7 @@ static const struct sdhci_acpi_chip sdhci_acpi_chip_amd = { }; static int sdhci_acpi_emmc_amd_probe_slot(struct platform_device *pdev, - const char *hid, const char *uid) + struct acpi_device *adev) { struct sdhci_acpi_host *c = platform_get_drvdata(pdev); struct sdhci_host *host = c->host; @@ -654,17 +647,12 @@ static const struct acpi_device_id sdhci_acpi_ids[] = { }; MODULE_DEVICE_TABLE(acpi, sdhci_acpi_ids); -static const struct sdhci_acpi_slot *sdhci_acpi_get_slot(const char *hid, - const char *uid) +static const struct sdhci_acpi_slot *sdhci_acpi_get_slot(struct acpi_device *adev) { const struct sdhci_acpi_uid_slot *u; for (u = sdhci_acpi_uids; u->hid; u++) { - if (strcmp(u->hid, hid)) - continue; - if (!u->uid) - return u->slot; - if (uid && !strcmp(u->uid, uid)) + if (acpi_dev_hid_uid_match(adev, u->hid, u->uid)) return u->slot; } return NULL; @@ -680,22 +668,17 @@ static int sdhci_acpi_probe(struct platform_device *pdev) struct resource *iomem; resource_size_t len; size_t priv_size; - const char *hid; - const char *uid; int err; device = ACPI_COMPANION(dev); if (!device) return -ENODEV; - hid = acpi_device_hid(device); - uid = acpi_device_uid(device); - - slot = sdhci_acpi_get_slot(hid, uid); + slot = sdhci_acpi_get_slot(device); /* Power on the SDHCI controller and its children */ acpi_device_fix_up_power(device); - if (!sdhci_acpi_no_fixup_child_power(hid, uid)) { + if (!sdhci_acpi_no_fixup_child_power(device)) { list_for_each_entry(child, &device->children, node) if (child->status.present && child->status.enabled) acpi_device_fix_up_power(child); @@ -745,7 +728,7 @@ static int sdhci_acpi_probe(struct platform_device *pdev) if (c->slot) { if (c->slot->probe_slot) { - err = c->slot->probe_slot(pdev, hid, uid); + err = c->slot->probe_slot(pdev, device); if (err) goto err_free; } diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h index 57b582bf73d9..9289bb4d633e 100644 --- a/drivers/mmc/host/sdhci-esdhc.h +++ b/drivers/mmc/host/sdhci-esdhc.h @@ -51,6 +51,11 @@ #define ESDHC_CLOCK_HCKEN 0x00000002 #define ESDHC_CLOCK_IPGEN 0x00000001 +/* System Control 2 Register */ +#define ESDHC_SYSTEM_CONTROL_2 0x3c +#define ESDHC_SMPCLKSEL 0x00800000 +#define ESDHC_EXTN 0x00400000 + /* Host Controller Capabilities Register 2 */ #define ESDHC_CAPABILITIES_1 0x114 @@ -59,7 +64,16 @@ #define ESDHC_HS400_WNDW_ADJUST 0x00000040 #define ESDHC_HS400_MODE 0x00000010 #define ESDHC_TB_EN 0x00000004 +#define ESDHC_TB_MODE_MASK 0x00000003 +#define ESDHC_TB_MODE_SW 0x00000003 +#define ESDHC_TB_MODE_3 0x00000002 + +#define ESDHC_TBSTAT 0x124 + #define ESDHC_TBPTR 0x128 +#define ESDHC_WNDW_STRT_PTR_SHIFT 8 +#define ESDHC_WNDW_STRT_PTR_MASK (0x7f << 8) +#define ESDHC_WNDW_END_PTR_MASK 0x7f /* SD Clock Control Register */ #define ESDHC_SDCLKCTL 0x144 diff --git a/drivers/mmc/host/sdhci-milbeaut.c b/drivers/mmc/host/sdhci-milbeaut.c new file mode 100644 index 000000000000..a1aa21b9ae1c --- /dev/null +++ b/drivers/mmc/host/sdhci-milbeaut.c @@ -0,0 +1,362 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2013 - 2015 Fujitsu Semiconductor, Ltd + * Vincent Yang <vincent.yang@tw.fujitsu.com> + * Copyright (C) 2015 Linaro Ltd Andy Green <andy.green@linaro.org> + * Copyright (C) 2019 Socionext Inc. + * Takao Orito <orito.takao@socionext.com> + */ + +#include <linux/bits.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/property.h> + +#include "sdhci-pltfm.h" +#include "sdhci_f_sdh30.h" + +/* milbeaut bridge controller register */ +#define MLB_SOFT_RESET 0x0200 +#define MLB_SOFT_RESET_RSTX BIT(0) + +#define MLB_WP_CD_LED_SET 0x0210 +#define MLB_WP_CD_LED_SET_LED_INV BIT(2) + +#define MLB_CR_SET 0x0220 +#define MLB_CR_SET_CR_TOCLKUNIT BIT(24) +#define MLB_CR_SET_CR_TOCLKFREQ_SFT (16) +#define MLB_CR_SET_CR_TOCLKFREQ_MASK (0x3F << MLB_CR_SET_CR_TOCLKFREQ_SFT) +#define MLB_CR_SET_CR_BCLKFREQ_SFT (8) +#define MLB_CR_SET_CR_BCLKFREQ_MASK (0xFF << MLB_CR_SET_CR_BCLKFREQ_SFT) +#define MLB_CR_SET_CR_RTUNTIMER_SFT (4) +#define MLB_CR_SET_CR_RTUNTIMER_MASK (0xF << MLB_CR_SET_CR_RTUNTIMER_SFT) + +#define MLB_SD_TOCLK_I_DIV 16 +#define MLB_TOCLKFREQ_UNIT_THRES 16000000 +#define MLB_CAL_TOCLKFREQ_MHZ(rate) (rate / MLB_SD_TOCLK_I_DIV / 1000000) +#define MLB_CAL_TOCLKFREQ_KHZ(rate) (rate / MLB_SD_TOCLK_I_DIV / 1000) +#define MLB_TOCLKFREQ_MAX 63 +#define MLB_TOCLKFREQ_MIN 1 + +#define MLB_SD_BCLK_I_DIV 4 +#define MLB_CAL_BCLKFREQ(rate) (rate / MLB_SD_BCLK_I_DIV / 1000000) +#define MLB_BCLKFREQ_MAX 255 +#define MLB_BCLKFREQ_MIN 1 + +#define MLB_CDR_SET 0x0230 +#define MLB_CDR_SET_CLK2POW16 3 + +struct f_sdhost_priv { + struct clk *clk_iface; + struct clk *clk; + struct device *dev; + bool enable_cmd_dat_delay; +}; + +static void sdhci_milbeaut_soft_voltage_switch(struct sdhci_host *host) +{ + u32 ctrl = 0; + + usleep_range(2500, 3000); + ctrl = sdhci_readl(host, F_SDH30_IO_CONTROL2); + ctrl |= F_SDH30_CRES_O_DN; + sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2); + ctrl |= F_SDH30_MSEL_O_1_8; + sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2); + + ctrl &= ~F_SDH30_CRES_O_DN; + sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2); + usleep_range(2500, 3000); + + ctrl = sdhci_readl(host, F_SDH30_TUNING_SETTING); + ctrl |= F_SDH30_CMD_CHK_DIS; + sdhci_writel(host, ctrl, F_SDH30_TUNING_SETTING); +} + +static unsigned int sdhci_milbeaut_get_min_clock(struct sdhci_host *host) +{ + return F_SDH30_MIN_CLOCK; +} + +static void sdhci_milbeaut_reset(struct sdhci_host *host, u8 mask) +{ + struct f_sdhost_priv *priv = sdhci_priv(host); + u16 clk; + u32 ctl; + ktime_t timeout; + + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + clk = (clk & ~SDHCI_CLOCK_CARD_EN) | SDHCI_CLOCK_INT_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + + sdhci_reset(host, mask); + + clk |= SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + + timeout = ktime_add_ms(ktime_get(), 10); + while (1) { + bool timedout = ktime_after(ktime_get(), timeout); + + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + if (clk & SDHCI_CLOCK_INT_STABLE) + break; + if (timedout) { + pr_err("%s: Internal clock never stabilised.\n", + mmc_hostname(host->mmc)); + sdhci_dumpregs(host); + return; + } + udelay(10); + } + + if (priv->enable_cmd_dat_delay) { + ctl = sdhci_readl(host, F_SDH30_ESD_CONTROL); + ctl |= F_SDH30_CMD_DAT_DELAY; + sdhci_writel(host, ctl, F_SDH30_ESD_CONTROL); + } +} + +static void sdhci_milbeaut_set_power(struct sdhci_host *host, + unsigned char mode, unsigned short vdd) +{ + if (!IS_ERR(host->mmc->supply.vmmc)) { + struct mmc_host *mmc = host->mmc; + + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd); + } + sdhci_set_power_noreg(host, mode, vdd); +} + +static const struct sdhci_ops sdhci_milbeaut_ops = { + .voltage_switch = sdhci_milbeaut_soft_voltage_switch, + .get_min_clock = sdhci_milbeaut_get_min_clock, + .reset = sdhci_milbeaut_reset, + .set_clock = sdhci_set_clock, + .set_bus_width = sdhci_set_bus_width, + .set_uhs_signaling = sdhci_set_uhs_signaling, + .set_power = sdhci_milbeaut_set_power, +}; + +static void sdhci_milbeaut_bridge_reset(struct sdhci_host *host, + int reset_flag) +{ + if (reset_flag) + sdhci_writel(host, 0, MLB_SOFT_RESET); + else + sdhci_writel(host, MLB_SOFT_RESET_RSTX, MLB_SOFT_RESET); +} + +static void sdhci_milbeaut_bridge_init(struct sdhci_host *host, + int rate) +{ + u32 val, clk; + + /* IO_SDIO_CR_SET should be set while reset */ + val = sdhci_readl(host, MLB_CR_SET); + val &= ~(MLB_CR_SET_CR_TOCLKFREQ_MASK | MLB_CR_SET_CR_TOCLKUNIT | + MLB_CR_SET_CR_BCLKFREQ_MASK); + if (rate >= MLB_TOCLKFREQ_UNIT_THRES) { + clk = MLB_CAL_TOCLKFREQ_MHZ(rate); + clk = min_t(u32, MLB_TOCLKFREQ_MAX, clk); + val |= MLB_CR_SET_CR_TOCLKUNIT | + (clk << MLB_CR_SET_CR_TOCLKFREQ_SFT); + } else { + clk = MLB_CAL_TOCLKFREQ_KHZ(rate); + clk = min_t(u32, MLB_TOCLKFREQ_MAX, clk); + clk = max_t(u32, MLB_TOCLKFREQ_MIN, clk); + val |= clk << MLB_CR_SET_CR_TOCLKFREQ_SFT; + } + + clk = MLB_CAL_BCLKFREQ(rate); + clk = min_t(u32, MLB_BCLKFREQ_MAX, clk); + clk = max_t(u32, MLB_BCLKFREQ_MIN, clk); + val |= clk << MLB_CR_SET_CR_BCLKFREQ_SFT; + val &= ~MLB_CR_SET_CR_RTUNTIMER_MASK; + sdhci_writel(host, val, MLB_CR_SET); + + sdhci_writel(host, MLB_CDR_SET_CLK2POW16, MLB_CDR_SET); + + sdhci_writel(host, MLB_WP_CD_LED_SET_LED_INV, MLB_WP_CD_LED_SET); +} + +static void sdhci_milbeaut_vendor_init(struct sdhci_host *host) +{ + struct f_sdhost_priv *priv = sdhci_priv(host); + u32 ctl; + + ctl = sdhci_readl(host, F_SDH30_IO_CONTROL2); + ctl |= F_SDH30_CRES_O_DN; + sdhci_writel(host, ctl, F_SDH30_IO_CONTROL2); + ctl &= ~F_SDH30_MSEL_O_1_8; + sdhci_writel(host, ctl, F_SDH30_IO_CONTROL2); + ctl &= ~F_SDH30_CRES_O_DN; + sdhci_writel(host, ctl, F_SDH30_IO_CONTROL2); + + ctl = sdhci_readw(host, F_SDH30_AHB_CONFIG); + ctl |= F_SDH30_SIN | F_SDH30_AHB_INCR_16 | F_SDH30_AHB_INCR_8 | + F_SDH30_AHB_INCR_4; + ctl &= ~(F_SDH30_AHB_BIGED | F_SDH30_BUSLOCK_EN); + sdhci_writew(host, ctl, F_SDH30_AHB_CONFIG); + + if (priv->enable_cmd_dat_delay) { + ctl = sdhci_readl(host, F_SDH30_ESD_CONTROL); + ctl |= F_SDH30_CMD_DAT_DELAY; + sdhci_writel(host, ctl, F_SDH30_ESD_CONTROL); + } +} + +static const struct of_device_id mlb_dt_ids[] = { + { + .compatible = "socionext,milbeaut-m10v-sdhci-3.0", + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mlb_dt_ids); + +static void sdhci_milbeaut_init(struct sdhci_host *host) +{ + struct f_sdhost_priv *priv = sdhci_priv(host); + int rate = clk_get_rate(priv->clk); + u16 ctl; + + sdhci_milbeaut_bridge_reset(host, 0); + + ctl = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + ctl &= ~(SDHCI_CLOCK_CARD_EN | SDHCI_CLOCK_INT_EN); + sdhci_writew(host, ctl, SDHCI_CLOCK_CONTROL); + + sdhci_milbeaut_bridge_reset(host, 1); + + sdhci_milbeaut_bridge_init(host, rate); + sdhci_milbeaut_bridge_reset(host, 0); + + sdhci_milbeaut_vendor_init(host); +} + +static int sdhci_milbeaut_probe(struct platform_device *pdev) +{ + struct sdhci_host *host; + struct device *dev = &pdev->dev; + struct resource *res; + int irq, ret = 0; + struct f_sdhost_priv *priv; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(dev, "%s: no irq specified\n", __func__); + return irq; + } + + host = sdhci_alloc_host(dev, sizeof(struct f_sdhost_priv)); + if (IS_ERR(host)) + return PTR_ERR(host); + + priv = sdhci_priv(host); + priv->dev = dev; + + host->quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC | + SDHCI_QUIRK_INVERTED_WRITE_PROTECT | + SDHCI_QUIRK_CLOCK_BEFORE_RESET | + SDHCI_QUIRK_DELAY_AFTER_POWER; + host->quirks2 = SDHCI_QUIRK2_SUPPORT_SINGLE | + SDHCI_QUIRK2_TUNING_WORK_AROUND | + SDHCI_QUIRK2_PRESET_VALUE_BROKEN; + + priv->enable_cmd_dat_delay = device_property_read_bool(dev, + "fujitsu,cmd-dat-delay-select"); + + ret = mmc_of_parse(host->mmc); + if (ret) + goto err; + + platform_set_drvdata(pdev, host); + + host->hw_name = "f_sdh30"; + host->ops = &sdhci_milbeaut_ops; + host->irq = irq; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + host->ioaddr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(host->ioaddr)) { + ret = PTR_ERR(host->ioaddr); + goto err; + } + + if (dev_of_node(dev)) { + sdhci_get_of_property(pdev); + + priv->clk_iface = devm_clk_get(&pdev->dev, "iface"); + if (IS_ERR(priv->clk_iface)) { + ret = PTR_ERR(priv->clk_iface); + goto err; + } + + ret = clk_prepare_enable(priv->clk_iface); + if (ret) + goto err; + + priv->clk = devm_clk_get(&pdev->dev, "core"); + if (IS_ERR(priv->clk)) { + ret = PTR_ERR(priv->clk); + goto err_clk; + } + + ret = clk_prepare_enable(priv->clk); + if (ret) + goto err_clk; + } + + sdhci_milbeaut_init(host); + + ret = sdhci_add_host(host); + if (ret) + goto err_add_host; + + return 0; + +err_add_host: + clk_disable_unprepare(priv->clk); +err_clk: + clk_disable_unprepare(priv->clk_iface); +err: + sdhci_free_host(host); + return ret; +} + +static int sdhci_milbeaut_remove(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + struct f_sdhost_priv *priv = sdhci_priv(host); + + sdhci_remove_host(host, readl(host->ioaddr + SDHCI_INT_STATUS) == + 0xffffffff); + + clk_disable_unprepare(priv->clk_iface); + clk_disable_unprepare(priv->clk); + + sdhci_free_host(host); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver sdhci_milbeaut_driver = { + .driver = { + .name = "sdhci-milbeaut", + .of_match_table = of_match_ptr(mlb_dt_ids), + }, + .probe = sdhci_milbeaut_probe, + .remove = sdhci_milbeaut_remove, +}; + +module_platform_driver(sdhci_milbeaut_driver); + +MODULE_DESCRIPTION("MILBEAUT SD Card Controller driver"); +MODULE_AUTHOR("Takao Orito <orito.takao@socionext.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:sdhci-milbeaut"); diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c index 7023cbec4017..e49b44b4d82e 100644 --- a/drivers/mmc/host/sdhci-of-arasan.c +++ b/drivers/mmc/host/sdhci-of-arasan.c @@ -22,6 +22,7 @@ #include <linux/phy/phy.h> #include <linux/regmap.h> #include <linux/of.h> +#include <linux/firmware/xlnx-zynqmp.h> #include "cqhci.h" #include "sdhci-pltfm.h" @@ -32,6 +33,10 @@ #define PHY_CLK_TOO_SLOW_HZ 400000 +/* Default settings for ZynqMP Clock Phases */ +#define ZYNQMP_ICLK_PHASE {0, 63, 63, 0, 63, 0, 0, 183, 54, 0, 0} +#define ZYNQMP_OCLK_PHASE {0, 72, 60, 0, 60, 72, 135, 48, 72, 135, 0} + /* * On some SoCs the syscon area has a feature where the upper 16-bits of * each 32-bit register act as a write mask for the lower 16-bits. This allows @@ -72,13 +77,38 @@ struct sdhci_arasan_soc_ctl_map { }; /** + * struct sdhci_arasan_clk_data + * @sdcardclk_hw: Struct for the clock we might provide to a PHY. + * @sdcardclk: Pointer to normal 'struct clock' for sdcardclk_hw. + * @sampleclk_hw: Struct for the clock we might provide to a PHY. + * @sampleclk: Pointer to normal 'struct clock' for sampleclk_hw. + * @clk_phase_in: Array of Input Clock Phase Delays for all speed modes + * @clk_phase_out: Array of Output Clock Phase Delays for all speed modes + * @set_clk_delays: Function pointer for setting Clock Delays + * @clk_of_data: Platform specific runtime clock data storage pointer + */ +struct sdhci_arasan_clk_data { + struct clk_hw sdcardclk_hw; + struct clk *sdcardclk; + struct clk_hw sampleclk_hw; + struct clk *sampleclk; + int clk_phase_in[MMC_TIMING_MMC_HS400 + 1]; + int clk_phase_out[MMC_TIMING_MMC_HS400 + 1]; + void (*set_clk_delays)(struct sdhci_host *host); + void *clk_of_data; +}; + +struct sdhci_arasan_zynqmp_clk_data { + const struct zynqmp_eemi_ops *eemi_ops; +}; + +/** * struct sdhci_arasan_data * @host: Pointer to the main SDHCI host structure. * @clk_ahb: Pointer to the AHB clock * @phy: Pointer to the generic phy * @is_phy_on: True if the PHY is on; false if not. - * @sdcardclk_hw: Struct for the clock we might provide to a PHY. - * @sdcardclk: Pointer to normal 'struct clock' for sdcardclk_hw. + * @clk_data: Struct for the Arasan Controller Clock Data. * @soc_ctl_base: Pointer to regmap for syscon for soc_ctl registers. * @soc_ctl_map: Map to get offsets into soc_ctl registers. */ @@ -89,8 +119,7 @@ struct sdhci_arasan_data { bool is_phy_on; bool has_cqe; - struct clk_hw sdcardclk_hw; - struct clk *sdcardclk; + struct sdhci_arasan_clk_data clk_data; struct regmap *soc_ctl_base; const struct sdhci_arasan_soc_ctl_map *soc_ctl_map; @@ -120,6 +149,12 @@ static const struct sdhci_arasan_soc_ctl_map intel_lgm_emmc_soc_ctl_map = { .hiword_update = false, }; +static const struct sdhci_arasan_soc_ctl_map intel_lgm_sdxc_soc_ctl_map = { + .baseclkfreq = { .reg = 0x80, .width = 8, .shift = 2 }, + .clockmultiplier = { .reg = 0, .width = -1, .shift = -1 }, + .hiword_update = false, +}; + /** * sdhci_arasan_syscon_write - Write to a field in soc_ctl registers * @@ -174,6 +209,7 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host); + struct sdhci_arasan_clk_data *clk_data = &sdhci_arasan->clk_data; bool ctrl_phy = false; if (!IS_ERR(sdhci_arasan->phy)) { @@ -215,6 +251,10 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock) sdhci_arasan->is_phy_on = false; } + /* Set the Input and Output Clock Phase Delays */ + if (clk_data->set_clk_delays) + clk_data->set_clk_delays(host); + sdhci_set_clock(host, clock); if (sdhci_arasan->quirks & SDHCI_ARASAN_QUIRK_CLOCK_UNSTABLE) @@ -384,6 +424,11 @@ static struct sdhci_arasan_of_data intel_lgm_emmc_data = { .pdata = &sdhci_arasan_cqe_pdata, }; +static struct sdhci_arasan_of_data intel_lgm_sdxc_data = { + .soc_ctl_map = &intel_lgm_sdxc_soc_ctl_map, + .pdata = &sdhci_arasan_cqe_pdata, +}; + #ifdef CONFIG_PM_SLEEP /** * sdhci_arasan_suspend - Suspend method for the driver @@ -489,6 +534,10 @@ static const struct of_device_id sdhci_arasan_of_match[] = { .compatible = "intel,lgm-sdhci-5.1-emmc", .data = &intel_lgm_emmc_data, }, + { + .compatible = "intel,lgm-sdhci-5.1-sdxc", + .data = &intel_lgm_sdxc_data, + }, /* Generic compatible below here */ { .compatible = "arasan,sdhci-8.9a", @@ -502,6 +551,10 @@ static const struct of_device_id sdhci_arasan_of_match[] = { .compatible = "arasan,sdhci-4.9a", .data = &sdhci_arasan_data, }, + { + .compatible = "xlnx,zynqmp-8.9a", + .data = &sdhci_arasan_data, + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, sdhci_arasan_of_match); @@ -520,8 +573,10 @@ static unsigned long sdhci_arasan_sdcardclk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { + struct sdhci_arasan_clk_data *clk_data = + container_of(hw, struct sdhci_arasan_clk_data, sdcardclk_hw); struct sdhci_arasan_data *sdhci_arasan = - container_of(hw, struct sdhci_arasan_data, sdcardclk_hw); + container_of(clk_data, struct sdhci_arasan_data, clk_data); struct sdhci_host *host = sdhci_arasan->host; return host->mmc->actual_clock; @@ -532,6 +587,177 @@ static const struct clk_ops arasan_sdcardclk_ops = { }; /** + * sdhci_arasan_sampleclk_recalc_rate - Return the sampling clock rate + * + * Return the current actual rate of the sampling clock. This can be used + * to communicate with out PHY. + * + * @hw: Pointer to the hardware clock structure. + * @parent_rate The parent rate (should be rate of clk_xin). + * Returns the sample clock rate. + */ +static unsigned long sdhci_arasan_sampleclk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) + +{ + struct sdhci_arasan_clk_data *clk_data = + container_of(hw, struct sdhci_arasan_clk_data, sampleclk_hw); + struct sdhci_arasan_data *sdhci_arasan = + container_of(clk_data, struct sdhci_arasan_data, clk_data); + struct sdhci_host *host = sdhci_arasan->host; + + return host->mmc->actual_clock; +} + +static const struct clk_ops arasan_sampleclk_ops = { + .recalc_rate = sdhci_arasan_sampleclk_recalc_rate, +}; + +/** + * sdhci_zynqmp_sdcardclk_set_phase - Set the SD Output Clock Tap Delays + * + * Set the SD Output Clock Tap Delays for Output path + * + * @hw: Pointer to the hardware clock structure. + * @degrees The clock phase shift between 0 - 359. + * Return: 0 on success and error value on error + */ +static int sdhci_zynqmp_sdcardclk_set_phase(struct clk_hw *hw, int degrees) + +{ + struct sdhci_arasan_clk_data *clk_data = + container_of(hw, struct sdhci_arasan_clk_data, sdcardclk_hw); + struct sdhci_arasan_data *sdhci_arasan = + container_of(clk_data, struct sdhci_arasan_data, clk_data); + struct sdhci_host *host = sdhci_arasan->host; + struct sdhci_arasan_zynqmp_clk_data *zynqmp_clk_data = + clk_data->clk_of_data; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_clk_data->eemi_ops; + const char *clk_name = clk_hw_get_name(hw); + u32 node_id = !strcmp(clk_name, "clk_out_sd0") ? NODE_SD_0 : NODE_SD_1; + u8 tap_delay, tap_max = 0; + int ret; + + /* + * This is applicable for SDHCI_SPEC_300 and above + * ZynqMP does not set phase for <=25MHz clock. + * If degrees is zero, no need to do anything. + */ + if (host->version < SDHCI_SPEC_300 || + host->timing == MMC_TIMING_LEGACY || + host->timing == MMC_TIMING_UHS_SDR12 || !degrees) + return 0; + + switch (host->timing) { + case MMC_TIMING_MMC_HS: + case MMC_TIMING_SD_HS: + case MMC_TIMING_UHS_SDR25: + case MMC_TIMING_UHS_DDR50: + case MMC_TIMING_MMC_DDR52: + /* For 50MHz clock, 30 Taps are available */ + tap_max = 30; + break; + case MMC_TIMING_UHS_SDR50: + /* For 100MHz clock, 15 Taps are available */ + tap_max = 15; + break; + case MMC_TIMING_UHS_SDR104: + case MMC_TIMING_MMC_HS200: + /* For 200MHz clock, 8 Taps are available */ + tap_max = 8; + default: + break; + } + + tap_delay = (degrees * tap_max) / 360; + + /* Set the Clock Phase */ + ret = eemi_ops->ioctl(node_id, IOCTL_SET_SD_TAPDELAY, + PM_TAPDELAY_OUTPUT, tap_delay, NULL); + if (ret) + pr_err("Error setting Output Tap Delay\n"); + + return ret; +} + +static const struct clk_ops zynqmp_sdcardclk_ops = { + .recalc_rate = sdhci_arasan_sdcardclk_recalc_rate, + .set_phase = sdhci_zynqmp_sdcardclk_set_phase, +}; + +/** + * sdhci_zynqmp_sampleclk_set_phase - Set the SD Input Clock Tap Delays + * + * Set the SD Input Clock Tap Delays for Input path + * + * @hw: Pointer to the hardware clock structure. + * @degrees The clock phase shift between 0 - 359. + * Return: 0 on success and error value on error + */ +static int sdhci_zynqmp_sampleclk_set_phase(struct clk_hw *hw, int degrees) + +{ + struct sdhci_arasan_clk_data *clk_data = + container_of(hw, struct sdhci_arasan_clk_data, sampleclk_hw); + struct sdhci_arasan_data *sdhci_arasan = + container_of(clk_data, struct sdhci_arasan_data, clk_data); + struct sdhci_host *host = sdhci_arasan->host; + struct sdhci_arasan_zynqmp_clk_data *zynqmp_clk_data = + clk_data->clk_of_data; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_clk_data->eemi_ops; + const char *clk_name = clk_hw_get_name(hw); + u32 node_id = !strcmp(clk_name, "clk_in_sd0") ? NODE_SD_0 : NODE_SD_1; + u8 tap_delay, tap_max = 0; + int ret; + + /* + * This is applicable for SDHCI_SPEC_300 and above + * ZynqMP does not set phase for <=25MHz clock. + * If degrees is zero, no need to do anything. + */ + if (host->version < SDHCI_SPEC_300 || + host->timing == MMC_TIMING_LEGACY || + host->timing == MMC_TIMING_UHS_SDR12 || !degrees) + return 0; + + switch (host->timing) { + case MMC_TIMING_MMC_HS: + case MMC_TIMING_SD_HS: + case MMC_TIMING_UHS_SDR25: + case MMC_TIMING_UHS_DDR50: + case MMC_TIMING_MMC_DDR52: + /* For 50MHz clock, 120 Taps are available */ + tap_max = 120; + break; + case MMC_TIMING_UHS_SDR50: + /* For 100MHz clock, 60 Taps are available */ + tap_max = 60; + break; + case MMC_TIMING_UHS_SDR104: + case MMC_TIMING_MMC_HS200: + /* For 200MHz clock, 30 Taps are available */ + tap_max = 30; + default: + break; + } + + tap_delay = (degrees * tap_max) / 360; + + /* Set the Clock Phase */ + ret = eemi_ops->ioctl(node_id, IOCTL_SET_SD_TAPDELAY, + PM_TAPDELAY_INPUT, tap_delay, NULL); + if (ret) + pr_err("Error setting Input Tap Delay\n"); + + return ret; +} + +static const struct clk_ops zynqmp_sampleclk_ops = { + .recalc_rate = sdhci_arasan_sampleclk_recalc_rate, + .set_phase = sdhci_zynqmp_sampleclk_set_phase, +}; + +/** * sdhci_arasan_update_clockmultiplier - Set corecfg_clockmultiplier * * The corecfg_clockmultiplier is supposed to contain clock multiplier @@ -609,39 +835,128 @@ static void sdhci_arasan_update_baseclkfreq(struct sdhci_host *host) sdhci_arasan_syscon_write(host, &soc_ctl_map->baseclkfreq, mhz); } +static void sdhci_arasan_set_clk_delays(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host); + struct sdhci_arasan_clk_data *clk_data = &sdhci_arasan->clk_data; + + clk_set_phase(clk_data->sampleclk, + clk_data->clk_phase_in[host->timing]); + clk_set_phase(clk_data->sdcardclk, + clk_data->clk_phase_out[host->timing]); +} + +static void arasan_dt_read_clk_phase(struct device *dev, + struct sdhci_arasan_clk_data *clk_data, + unsigned int timing, const char *prop) +{ + struct device_node *np = dev->of_node; + + int clk_phase[2] = {0}; + + /* + * Read Tap Delay values from DT, if the DT does not contain the + * Tap Values then use the pre-defined values. + */ + if (of_property_read_variable_u32_array(np, prop, &clk_phase[0], + 2, 0)) { + dev_dbg(dev, "Using predefined clock phase for %s = %d %d\n", + prop, clk_data->clk_phase_in[timing], + clk_data->clk_phase_out[timing]); + return; + } + + /* The values read are Input and Output Clock Delays in order */ + clk_data->clk_phase_in[timing] = clk_phase[0]; + clk_data->clk_phase_out[timing] = clk_phase[1]; +} + /** - * sdhci_arasan_register_sdclk - Register the sdclk for a PHY to use + * arasan_dt_parse_clk_phases - Read Clock Delay values from DT + * + * Called at initialization to parse the values of Clock Delays. + * + * @dev: Pointer to our struct device. + * @clk_data: Pointer to the Clock Data structure + */ +static void arasan_dt_parse_clk_phases(struct device *dev, + struct sdhci_arasan_clk_data *clk_data) +{ + int *iclk_phase, *oclk_phase; + u32 mio_bank = 0; + int i; + + /* + * This has been kept as a pointer and is assigned a function here. + * So that different controller variants can assign their own handling + * function. + */ + clk_data->set_clk_delays = sdhci_arasan_set_clk_delays; + + if (of_device_is_compatible(dev->of_node, "xlnx,zynqmp-8.9a")) { + iclk_phase = (int [MMC_TIMING_MMC_HS400 + 1]) ZYNQMP_ICLK_PHASE; + oclk_phase = (int [MMC_TIMING_MMC_HS400 + 1]) ZYNQMP_OCLK_PHASE; + + of_property_read_u32(dev->of_node, "xlnx,mio-bank", &mio_bank); + if (mio_bank == 2) { + oclk_phase[MMC_TIMING_UHS_SDR104] = 90; + oclk_phase[MMC_TIMING_MMC_HS200] = 90; + } + + for (i = 0; i <= MMC_TIMING_MMC_HS400; i++) { + clk_data->clk_phase_in[i] = iclk_phase[i]; + clk_data->clk_phase_out[i] = oclk_phase[i]; + } + } + + arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_LEGACY, + "clk-phase-legacy"); + arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_MMC_HS, + "clk-phase-mmc-hs"); + arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_SD_HS, + "clk-phase-sd-hs"); + arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_UHS_SDR12, + "clk-phase-uhs-sdr12"); + arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_UHS_SDR25, + "clk-phase-uhs-sdr25"); + arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_UHS_SDR50, + "clk-phase-uhs-sdr50"); + arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_UHS_SDR104, + "clk-phase-uhs-sdr104"); + arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_UHS_DDR50, + "clk-phase-uhs-ddr50"); + arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_MMC_DDR52, + "clk-phase-mmc-ddr52"); + arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_MMC_HS200, + "clk-phase-mmc-hs200"); + arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_MMC_HS400, + "clk-phase-mmc-hs400"); +} + +/** + * sdhci_arasan_register_sdcardclk - Register the sdcardclk for a PHY to use * * Some PHY devices need to know what the actual card clock is. In order for * them to find out, we'll provide a clock through the common clock framework * for them to query. * - * Note: without seriously re-architecting SDHCI's clock code and testing on - * all platforms, there's no way to create a totally beautiful clock here - * with all clock ops implemented. Instead, we'll just create a clock that can - * be queried and set the CLK_GET_RATE_NOCACHE attribute to tell common clock - * framework that we're doing things behind its back. This should be sufficient - * to create nice clean device tree bindings and later (if needed) we can try - * re-architecting SDHCI if we see some benefit to it. - * * @sdhci_arasan: Our private data structure. * @clk_xin: Pointer to the functional clock * @dev: Pointer to our struct device. * Returns 0 on success and error value on error */ -static int sdhci_arasan_register_sdclk(struct sdhci_arasan_data *sdhci_arasan, - struct clk *clk_xin, - struct device *dev) +static int +sdhci_arasan_register_sdcardclk(struct sdhci_arasan_data *sdhci_arasan, + struct clk *clk_xin, + struct device *dev) { + struct sdhci_arasan_clk_data *clk_data = &sdhci_arasan->clk_data; struct device_node *np = dev->of_node; struct clk_init_data sdcardclk_init; const char *parent_clk_name; int ret; - /* Providing a clock to the PHY is optional; no error if missing */ - if (!of_find_property(np, "#clock-cells", NULL)) - return 0; - ret = of_property_read_string_index(np, "clock-output-names", 0, &sdcardclk_init.name); if (ret) { @@ -653,17 +968,72 @@ static int sdhci_arasan_register_sdclk(struct sdhci_arasan_data *sdhci_arasan, sdcardclk_init.parent_names = &parent_clk_name; sdcardclk_init.num_parents = 1; sdcardclk_init.flags = CLK_GET_RATE_NOCACHE; - sdcardclk_init.ops = &arasan_sdcardclk_ops; + if (of_device_is_compatible(np, "xlnx,zynqmp-8.9a")) + sdcardclk_init.ops = &zynqmp_sdcardclk_ops; + else + sdcardclk_init.ops = &arasan_sdcardclk_ops; + + clk_data->sdcardclk_hw.init = &sdcardclk_init; + clk_data->sdcardclk = + devm_clk_register(dev, &clk_data->sdcardclk_hw); + clk_data->sdcardclk_hw.init = NULL; + + ret = of_clk_add_provider(np, of_clk_src_simple_get, + clk_data->sdcardclk); + if (ret) + dev_err(dev, "Failed to add sdcard clock provider\n"); + + return ret; +} + +/** + * sdhci_arasan_register_sampleclk - Register the sampleclk for a PHY to use + * + * Some PHY devices need to know what the actual card clock is. In order for + * them to find out, we'll provide a clock through the common clock framework + * for them to query. + * + * @sdhci_arasan: Our private data structure. + * @clk_xin: Pointer to the functional clock + * @dev: Pointer to our struct device. + * Returns 0 on success and error value on error + */ +static int +sdhci_arasan_register_sampleclk(struct sdhci_arasan_data *sdhci_arasan, + struct clk *clk_xin, + struct device *dev) +{ + struct sdhci_arasan_clk_data *clk_data = &sdhci_arasan->clk_data; + struct device_node *np = dev->of_node; + struct clk_init_data sampleclk_init; + const char *parent_clk_name; + int ret; - sdhci_arasan->sdcardclk_hw.init = &sdcardclk_init; - sdhci_arasan->sdcardclk = - devm_clk_register(dev, &sdhci_arasan->sdcardclk_hw); - sdhci_arasan->sdcardclk_hw.init = NULL; + ret = of_property_read_string_index(np, "clock-output-names", 1, + &sampleclk_init.name); + if (ret) { + dev_err(dev, "DT has #clock-cells but no clock-output-names\n"); + return ret; + } + + parent_clk_name = __clk_get_name(clk_xin); + sampleclk_init.parent_names = &parent_clk_name; + sampleclk_init.num_parents = 1; + sampleclk_init.flags = CLK_GET_RATE_NOCACHE; + if (of_device_is_compatible(np, "xlnx,zynqmp-8.9a")) + sampleclk_init.ops = &zynqmp_sampleclk_ops; + else + sampleclk_init.ops = &arasan_sampleclk_ops; + + clk_data->sampleclk_hw.init = &sampleclk_init; + clk_data->sampleclk = + devm_clk_register(dev, &clk_data->sampleclk_hw); + clk_data->sampleclk_hw.init = NULL; ret = of_clk_add_provider(np, of_clk_src_simple_get, - sdhci_arasan->sdcardclk); + clk_data->sampleclk); if (ret) - dev_err(dev, "Failed to add clock provider\n"); + dev_err(dev, "Failed to add sample clock provider\n"); return ret; } @@ -686,6 +1056,54 @@ static void sdhci_arasan_unregister_sdclk(struct device *dev) of_clk_del_provider(dev->of_node); } +/** + * sdhci_arasan_register_sdclk - Register the sdcardclk for a PHY to use + * + * Some PHY devices need to know what the actual card clock is. In order for + * them to find out, we'll provide a clock through the common clock framework + * for them to query. + * + * Note: without seriously re-architecting SDHCI's clock code and testing on + * all platforms, there's no way to create a totally beautiful clock here + * with all clock ops implemented. Instead, we'll just create a clock that can + * be queried and set the CLK_GET_RATE_NOCACHE attribute to tell common clock + * framework that we're doing things behind its back. This should be sufficient + * to create nice clean device tree bindings and later (if needed) we can try + * re-architecting SDHCI if we see some benefit to it. + * + * @sdhci_arasan: Our private data structure. + * @clk_xin: Pointer to the functional clock + * @dev: Pointer to our struct device. + * Returns 0 on success and error value on error + */ +static int sdhci_arasan_register_sdclk(struct sdhci_arasan_data *sdhci_arasan, + struct clk *clk_xin, + struct device *dev) +{ + struct device_node *np = dev->of_node; + u32 num_clks = 0; + int ret; + + /* Providing a clock to the PHY is optional; no error if missing */ + if (of_property_read_u32(np, "#clock-cells", &num_clks) < 0) + return 0; + + ret = sdhci_arasan_register_sdcardclk(sdhci_arasan, clk_xin, dev); + if (ret) + return ret; + + if (num_clks) { + ret = sdhci_arasan_register_sampleclk(sdhci_arasan, clk_xin, + dev); + if (ret) { + sdhci_arasan_unregister_sdclk(dev); + return ret; + } + } + + return 0; +} + static int sdhci_arasan_add_host(struct sdhci_arasan_data *sdhci_arasan) { struct sdhci_host *host = sdhci_arasan->host; @@ -814,6 +1232,25 @@ static int sdhci_arasan_probe(struct platform_device *pdev) if (ret) goto clk_disable_all; + if (of_device_is_compatible(np, "xlnx,zynqmp-8.9a")) { + struct sdhci_arasan_zynqmp_clk_data *zynqmp_clk_data; + const struct zynqmp_eemi_ops *eemi_ops; + + zynqmp_clk_data = devm_kzalloc(&pdev->dev, + sizeof(*zynqmp_clk_data), + GFP_KERNEL); + eemi_ops = zynqmp_pm_get_eemi_ops(); + if (IS_ERR(eemi_ops)) { + ret = PTR_ERR(eemi_ops); + goto unreg_clk; + } + + zynqmp_clk_data->eemi_ops = eemi_ops; + sdhci_arasan->clk_data.clk_of_data = zynqmp_clk_data; + } + + arasan_dt_parse_clk_phases(&pdev->dev, &sdhci_arasan->clk_data); + ret = mmc_of_parse(host->mmc); if (ret) { if (ret != -EPROBE_DEFER) diff --git a/drivers/mmc/host/sdhci-of-aspeed.c b/drivers/mmc/host/sdhci-of-aspeed.c index 8962f6664381..56912e30c47e 100644 --- a/drivers/mmc/host/sdhci-of-aspeed.c +++ b/drivers/mmc/host/sdhci-of-aspeed.c @@ -111,7 +111,19 @@ static void aspeed_sdhci_set_bus_width(struct sdhci_host *host, int width) sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); } +static u32 aspeed_sdhci_readl(struct sdhci_host *host, int reg) +{ + u32 val = readl(host->ioaddr + reg); + + if (unlikely(reg == SDHCI_PRESENT_STATE) && + (host->mmc->caps2 & MMC_CAP2_CD_ACTIVE_HIGH)) + val ^= SDHCI_CARD_PRESENT; + + return val; +} + static const struct sdhci_ops aspeed_sdhci_ops = { + .read_l = aspeed_sdhci_readl, .set_clock = aspeed_sdhci_set_clock, .get_max_clock = aspeed_sdhci_get_max_clock, .set_bus_width = aspeed_sdhci_set_bus_width, diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c index e7d1920729fb..5959e394b416 100644 --- a/drivers/mmc/host/sdhci-of-at91.c +++ b/drivers/mmc/host/sdhci-of-at91.c @@ -27,6 +27,9 @@ #define SDMMC_CACR 0x230 #define SDMMC_CACR_CAPWREN BIT(0) #define SDMMC_CACR_KEY (0x46 << 8) +#define SDMMC_CALCR 0x240 +#define SDMMC_CALCR_EN BIT(0) +#define SDMMC_CALCR_ALWYSON BIT(4) #define SDHCI_AT91_PRESET_COMMON_CONF 0x400 /* drv type B, programmable clock mode */ @@ -35,6 +38,7 @@ struct sdhci_at91_priv { struct clk *gck; struct clk *mainck; bool restore_needed; + bool cal_always_on; }; static void sdhci_at91_set_force_card_detect(struct sdhci_host *host) @@ -116,10 +120,17 @@ static void sdhci_at91_set_uhs_signaling(struct sdhci_host *host, static void sdhci_at91_reset(struct sdhci_host *host, u8 mask) { + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host); + sdhci_reset(host, mask); if (host->mmc->caps & MMC_CAP_NONREMOVABLE) sdhci_at91_set_force_card_detect(host); + + if (priv->cal_always_on && (mask & SDHCI_RESET_ALL)) + sdhci_writel(host, SDMMC_CALCR_ALWYSON | SDMMC_CALCR_EN, + SDMMC_CALCR); } static const struct sdhci_ops sdhci_at91_sama5d2_ops = { @@ -345,6 +356,14 @@ static int sdhci_at91_probe(struct platform_device *pdev) priv->restore_needed = false; + /* + * if SDCAL pin is wrongly connected, we must enable + * the analog calibration cell permanently. + */ + priv->cal_always_on = + device_property_read_bool(&pdev->dev, + "microchip,sdcal-inverted"); + ret = mmc_of_parse(host->mmc); if (ret) goto clocks_disable_unprepare; @@ -358,7 +377,7 @@ static int sdhci_at91_probe(struct platform_device *pdev) pm_runtime_use_autosuspend(&pdev->dev); /* HS200 is broken at this moment */ - host->quirks2 = SDHCI_QUIRK2_BROKEN_HS200; + host->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200; ret = sdhci_add_host(host); if (ret) diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index 1d1953dfc54b..5cca3fa4610b 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -77,8 +77,10 @@ struct sdhci_esdhc { bool quirk_incorrect_hostver; bool quirk_limited_clk_division; bool quirk_unreliable_pulse_detection; - bool quirk_fixup_tuning; + bool quirk_tuning_erratum_type1; + bool quirk_tuning_erratum_type2; bool quirk_ignore_data_inhibit; + bool in_sw_tuning; unsigned int peripheral_clock; const struct esdhc_clk_fixup *clk_fixup; u32 div_ratio; @@ -408,6 +410,8 @@ static void esdhc_le_writel(struct sdhci_host *host, u32 val, int reg) static void esdhc_be_writew(struct sdhci_host *host, u16 val, int reg) { + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); int base = reg & ~0x3; u32 value; u32 ret; @@ -416,10 +420,24 @@ static void esdhc_be_writew(struct sdhci_host *host, u16 val, int reg) ret = esdhc_writew_fixup(host, reg, val, value); if (reg != SDHCI_TRANSFER_MODE) iowrite32be(ret, host->ioaddr + base); + + /* Starting SW tuning requires ESDHC_SMPCLKSEL to be set + * 1us later after ESDHC_EXTN is set. + */ + if (base == ESDHC_SYSTEM_CONTROL_2) { + if (!(value & ESDHC_EXTN) && (ret & ESDHC_EXTN) && + esdhc->in_sw_tuning) { + udelay(1); + ret |= ESDHC_SMPCLKSEL; + iowrite32be(ret, host->ioaddr + base); + } + } } static void esdhc_le_writew(struct sdhci_host *host, u16 val, int reg) { + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); int base = reg & ~0x3; u32 value; u32 ret; @@ -428,6 +446,18 @@ static void esdhc_le_writew(struct sdhci_host *host, u16 val, int reg) ret = esdhc_writew_fixup(host, reg, val, value); if (reg != SDHCI_TRANSFER_MODE) iowrite32(ret, host->ioaddr + base); + + /* Starting SW tuning requires ESDHC_SMPCLKSEL to be set + * 1us later after ESDHC_EXTN is set. + */ + if (base == ESDHC_SYSTEM_CONTROL_2) { + if (!(value & ESDHC_EXTN) && (ret & ESDHC_EXTN) && + esdhc->in_sw_tuning) { + udelay(1); + ret |= ESDHC_SMPCLKSEL; + iowrite32(ret, host->ioaddr + base); + } + } } static void esdhc_be_writeb(struct sdhci_host *host, u8 val, int reg) @@ -560,6 +590,32 @@ static void esdhc_clock_enable(struct sdhci_host *host, bool enable) } } +static void esdhc_flush_async_fifo(struct sdhci_host *host) +{ + ktime_t timeout; + u32 val; + + val = sdhci_readl(host, ESDHC_DMA_SYSCTL); + val |= ESDHC_FLUSH_ASYNC_FIFO; + sdhci_writel(host, val, ESDHC_DMA_SYSCTL); + + /* Wait max 20 ms */ + timeout = ktime_add_ms(ktime_get(), 20); + while (1) { + bool timedout = ktime_after(ktime_get(), timeout); + + if (!(sdhci_readl(host, ESDHC_DMA_SYSCTL) & + ESDHC_FLUSH_ASYNC_FIFO)) + break; + if (timedout) { + pr_err("%s: flushing asynchronous FIFO timeout.\n", + mmc_hostname(host->mmc)); + break; + } + usleep_range(10, 20); + } +} + static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); @@ -652,9 +708,7 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock) sdhci_writel(host, temp | ESDHC_HS400_WNDW_ADJUST, ESDHC_TBCTL); esdhc_clock_enable(host, false); - temp = sdhci_readl(host, ESDHC_DMA_SYSCTL); - temp |= ESDHC_FLUSH_ASYNC_FIFO; - sdhci_writel(host, temp, ESDHC_DMA_SYSCTL); + esdhc_flush_async_fifo(host); } /* Wait max 20 ms */ @@ -796,16 +850,21 @@ static int esdhc_signal_voltage_switch(struct mmc_host *mmc, } } -static struct soc_device_attribute soc_fixup_tuning[] = { +static struct soc_device_attribute soc_tuning_erratum_type1[] = { + { .family = "QorIQ T1023", .revision = "1.0", }, { .family = "QorIQ T1040", .revision = "1.0", }, { .family = "QorIQ T2080", .revision = "1.0", }, - { .family = "QorIQ T1023", .revision = "1.0", }, { .family = "QorIQ LS1021A", .revision = "1.0", }, - { .family = "QorIQ LS1080A", .revision = "1.0", }, - { .family = "QorIQ LS2080A", .revision = "1.0", }, + { }, +}; + +static struct soc_device_attribute soc_tuning_erratum_type2[] = { { .family = "QorIQ LS1012A", .revision = "1.0", }, { .family = "QorIQ LS1043A", .revision = "1.*", }, { .family = "QorIQ LS1046A", .revision = "1.0", }, + { .family = "QorIQ LS1080A", .revision = "1.0", }, + { .family = "QorIQ LS2080A", .revision = "1.0", }, + { .family = "QorIQ LA1575A", .revision = "1.0", }, { }, }; @@ -814,10 +873,7 @@ static void esdhc_tuning_block_enable(struct sdhci_host *host, bool enable) u32 val; esdhc_clock_enable(host, false); - - val = sdhci_readl(host, ESDHC_DMA_SYSCTL); - val |= ESDHC_FLUSH_ASYNC_FIFO; - sdhci_writel(host, val, ESDHC_DMA_SYSCTL); + esdhc_flush_async_fifo(host); val = sdhci_readl(host, ESDHC_TBCTL); if (enable) @@ -829,15 +885,97 @@ static void esdhc_tuning_block_enable(struct sdhci_host *host, bool enable) esdhc_clock_enable(host, true); } +static void esdhc_prepare_sw_tuning(struct sdhci_host *host, u8 *window_start, + u8 *window_end) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); + u8 tbstat_15_8, tbstat_7_0; + u32 val; + + if (esdhc->quirk_tuning_erratum_type1) { + *window_start = 5 * esdhc->div_ratio; + *window_end = 3 * esdhc->div_ratio; + return; + } + + /* Write TBCTL[11:8]=4'h8 */ + val = sdhci_readl(host, ESDHC_TBCTL); + val &= ~(0xf << 8); + val |= 8 << 8; + sdhci_writel(host, val, ESDHC_TBCTL); + + mdelay(1); + + /* Read TBCTL[31:0] register and rewrite again */ + val = sdhci_readl(host, ESDHC_TBCTL); + sdhci_writel(host, val, ESDHC_TBCTL); + + mdelay(1); + + /* Read the TBSTAT[31:0] register twice */ + val = sdhci_readl(host, ESDHC_TBSTAT); + val = sdhci_readl(host, ESDHC_TBSTAT); + + /* Reset data lines by setting ESDHCCTL[RSTD] */ + sdhci_reset(host, SDHCI_RESET_DATA); + /* Write 32'hFFFF_FFFF to IRQSTAT register */ + sdhci_writel(host, 0xFFFFFFFF, SDHCI_INT_STATUS); + + /* If TBSTAT[15:8]-TBSTAT[7:0] > 4 * div_ratio + * or TBSTAT[7:0]-TBSTAT[15:8] > 4 * div_ratio, + * then program TBPTR[TB_WNDW_END_PTR] = 4 * div_ratio + * and program TBPTR[TB_WNDW_START_PTR] = 8 * div_ratio. + */ + tbstat_7_0 = val & 0xff; + tbstat_15_8 = (val >> 8) & 0xff; + + if (abs(tbstat_15_8 - tbstat_7_0) > (4 * esdhc->div_ratio)) { + *window_start = 8 * esdhc->div_ratio; + *window_end = 4 * esdhc->div_ratio; + } else { + *window_start = 5 * esdhc->div_ratio; + *window_end = 3 * esdhc->div_ratio; + } +} + +static int esdhc_execute_sw_tuning(struct mmc_host *mmc, u32 opcode, + u8 window_start, u8 window_end) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); + u32 val; + int ret; + + /* Program TBPTR[TB_WNDW_END_PTR] and TBPTR[TB_WNDW_START_PTR] */ + val = ((u32)window_start << ESDHC_WNDW_STRT_PTR_SHIFT) & + ESDHC_WNDW_STRT_PTR_MASK; + val |= window_end & ESDHC_WNDW_END_PTR_MASK; + sdhci_writel(host, val, ESDHC_TBPTR); + + /* Program the software tuning mode by setting TBCTL[TB_MODE]=2'h3 */ + val = sdhci_readl(host, ESDHC_TBCTL); + val &= ~ESDHC_TB_MODE_MASK; + val |= ESDHC_TB_MODE_SW; + sdhci_writel(host, val, ESDHC_TBCTL); + + esdhc->in_sw_tuning = true; + ret = sdhci_execute_tuning(mmc, opcode); + esdhc->in_sw_tuning = false; + return ret; +} + static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode) { struct sdhci_host *host = mmc_priv(mmc); struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); + u8 window_start, window_end; + int ret, retries = 1; bool hs400_tuning; unsigned int clk; u32 val; - int ret; /* For tuning mode, the sd clock divisor value * must be larger than 3 according to reference manual. @@ -846,39 +984,73 @@ static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode) if (host->clock > clk) esdhc_of_set_clock(host, clk); - if (esdhc->quirk_limited_clk_division && - host->flags & SDHCI_HS400_TUNING) - esdhc_of_set_clock(host, host->clock); - esdhc_tuning_block_enable(host, true); hs400_tuning = host->flags & SDHCI_HS400_TUNING; - ret = sdhci_execute_tuning(mmc, opcode); - if (hs400_tuning) { - val = sdhci_readl(host, ESDHC_SDTIMNGCTL); - val |= ESDHC_FLW_CTL_BG; - sdhci_writel(host, val, ESDHC_SDTIMNGCTL); - } + do { + if (esdhc->quirk_limited_clk_division && + hs400_tuning) + esdhc_of_set_clock(host, host->clock); - if (host->tuning_err == -EAGAIN && esdhc->quirk_fixup_tuning) { + /* Do HW tuning */ + val = sdhci_readl(host, ESDHC_TBCTL); + val &= ~ESDHC_TB_MODE_MASK; + val |= ESDHC_TB_MODE_3; + sdhci_writel(host, val, ESDHC_TBCTL); - /* program TBPTR[TB_WNDW_END_PTR] = 3*DIV_RATIO and - * program TBPTR[TB_WNDW_START_PTR] = 5*DIV_RATIO - */ - val = sdhci_readl(host, ESDHC_TBPTR); - val = (val & ~((0x7f << 8) | 0x7f)) | - (3 * esdhc->div_ratio) | ((5 * esdhc->div_ratio) << 8); - sdhci_writel(host, val, ESDHC_TBPTR); + ret = sdhci_execute_tuning(mmc, opcode); + if (ret) + break; - /* program the software tuning mode by setting - * TBCTL[TB_MODE]=2'h3 + /* If HW tuning fails and triggers erratum, + * try workaround. */ - val = sdhci_readl(host, ESDHC_TBCTL); - val |= 0x3; - sdhci_writel(host, val, ESDHC_TBCTL); - sdhci_execute_tuning(mmc, opcode); + ret = host->tuning_err; + if (ret == -EAGAIN && + (esdhc->quirk_tuning_erratum_type1 || + esdhc->quirk_tuning_erratum_type2)) { + /* Recover HS400 tuning flag */ + if (hs400_tuning) + host->flags |= SDHCI_HS400_TUNING; + pr_info("%s: Hold on to use fixed sampling clock. Try SW tuning!\n", + mmc_hostname(mmc)); + /* Do SW tuning */ + esdhc_prepare_sw_tuning(host, &window_start, + &window_end); + ret = esdhc_execute_sw_tuning(mmc, opcode, + window_start, + window_end); + if (ret) + break; + + /* Retry both HW/SW tuning with reduced clock. */ + ret = host->tuning_err; + if (ret == -EAGAIN && retries) { + /* Recover HS400 tuning flag */ + if (hs400_tuning) + host->flags |= SDHCI_HS400_TUNING; + + clk = host->max_clk / (esdhc->div_ratio + 1); + esdhc_of_set_clock(host, clk); + pr_info("%s: Hold on to use fixed sampling clock. Try tuning with reduced clock!\n", + mmc_hostname(mmc)); + } else { + break; + } + } else { + break; + } + } while (retries--); + + if (ret) { + esdhc_tuning_block_enable(host, false); + } else if (hs400_tuning) { + val = sdhci_readl(host, ESDHC_SDTIMNGCTL); + val |= ESDHC_FLW_CTL_BG; + sdhci_writel(host, val, ESDHC_SDTIMNGCTL); } + return ret; } @@ -1114,10 +1286,15 @@ static int sdhci_esdhc_probe(struct platform_device *pdev) pltfm_host = sdhci_priv(host); esdhc = sdhci_pltfm_priv(pltfm_host); - if (soc_device_match(soc_fixup_tuning)) - esdhc->quirk_fixup_tuning = true; + if (soc_device_match(soc_tuning_erratum_type1)) + esdhc->quirk_tuning_erratum_type1 = true; + else + esdhc->quirk_tuning_erratum_type1 = false; + + if (soc_device_match(soc_tuning_erratum_type2)) + esdhc->quirk_tuning_erratum_type2 = true; else - esdhc->quirk_fixup_tuning = false; + esdhc->quirk_tuning_erratum_type2 = false; if (esdhc->vendor_ver == VENDOR_V_22) host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23; diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index eaffa85bc728..acefb76b4e15 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -21,6 +21,7 @@ #include <linux/mmc/mmc.h> #include <linux/scatterlist.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/gpio.h> #include <linux/pm_runtime.h> #include <linux/mmc/slot-gpio.h> @@ -1590,11 +1591,59 @@ static int amd_probe(struct sdhci_pci_chip *chip) return 0; } +static u32 sdhci_read_present_state(struct sdhci_host *host) +{ + return sdhci_readl(host, SDHCI_PRESENT_STATE); +} + +static void amd_sdhci_reset(struct sdhci_host *host, u8 mask) +{ + struct sdhci_pci_slot *slot = sdhci_priv(host); + struct pci_dev *pdev = slot->chip->pdev; + u32 present_state; + + /* + * SDHC 0x7906 requires a hard reset to clear all internal state. + * Otherwise it can get into a bad state where the DATA lines are always + * read as zeros. + */ + if (pdev->device == 0x7906 && (mask & SDHCI_RESET_ALL)) { + pci_clear_master(pdev); + + pci_save_state(pdev); + + pci_set_power_state(pdev, PCI_D3cold); + pr_debug("%s: power_state=%u\n", mmc_hostname(host->mmc), + pdev->current_state); + pci_set_power_state(pdev, PCI_D0); + + pci_restore_state(pdev); + + /* + * SDHCI_RESET_ALL says the card detect logic should not be + * reset, but since we need to reset the entire controller + * we should wait until the card detect logic has stabilized. + * + * This normally takes about 40ms. + */ + readx_poll_timeout( + sdhci_read_present_state, + host, + present_state, + present_state & SDHCI_CD_STABLE, + 10000, + 100000 + ); + } + + return sdhci_reset(host, mask); +} + static const struct sdhci_ops amd_sdhci_pci_ops = { .set_clock = sdhci_set_clock, .enable_dma = sdhci_pci_enable_dma, .set_bus_width = sdhci_set_bus_width, - .reset = sdhci_reset, + .reset = amd_sdhci_reset, .set_uhs_signaling = sdhci_set_uhs_signaling, }; @@ -1673,6 +1722,8 @@ static const struct pci_device_id pci_ids[] = { SDHCI_PCI_DEVICE(INTEL, CML_EMMC, intel_glk_emmc), SDHCI_PCI_DEVICE(INTEL, CML_SD, intel_byt_sd), SDHCI_PCI_DEVICE(INTEL, CMLH_SD, intel_byt_sd), + SDHCI_PCI_DEVICE(INTEL, JSL_EMMC, intel_glk_emmc), + SDHCI_PCI_DEVICE(INTEL, JSL_SD, intel_byt_sd), SDHCI_PCI_DEVICE(O2, 8120, o2), SDHCI_PCI_DEVICE(O2, 8220, o2), SDHCI_PCI_DEVICE(O2, 8221, o2), diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h index 558202fe64c6..981bbbe63aff 100644 --- a/drivers/mmc/host/sdhci-pci.h +++ b/drivers/mmc/host/sdhci-pci.h @@ -55,6 +55,8 @@ #define PCI_DEVICE_ID_INTEL_CML_EMMC 0x02c4 #define PCI_DEVICE_ID_INTEL_CML_SD 0x02f5 #define PCI_DEVICE_ID_INTEL_CMLH_SD 0x06f5 +#define PCI_DEVICE_ID_INTEL_JSL_EMMC 0x4dc4 +#define PCI_DEVICE_ID_INTEL_JSL_SD 0x4df8 #define PCI_DEVICE_ID_SYSKONNECT_8000 0x8000 #define PCI_DEVICE_ID_VIA_95D0 0x95d0 diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index b056400e34b1..3140fe2e5dba 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -337,8 +337,19 @@ static void sdhci_init(struct sdhci_host *host, int soft) static void sdhci_reinit(struct sdhci_host *host) { + u32 cd = host->ier & (SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT); + sdhci_init(host, 0); sdhci_enable_card_detection(host); + + /* + * A change to the card detect bits indicates a change in present state, + * refer sdhci_set_card_detection(). A card detect interrupt might have + * been missed while the host controller was being reset, so trigger a + * rescan to check. + */ + if (cd != (host->ier & (SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT))) + mmc_detect_change(host->mmc, msecs_to_jiffies(200)); } static void __sdhci_led_activate(struct sdhci_host *host) @@ -2202,7 +2213,7 @@ int sdhci_start_signal_voltage_switch(struct mmc_host *mmc, if (!(ctrl & SDHCI_CTRL_VDD_180)) return 0; - pr_warn("%s: 3.3V regulator output did not became stable\n", + pr_warn("%s: 3.3V regulator output did not become stable\n", mmc_hostname(mmc)); return -EAGAIN; @@ -2234,7 +2245,7 @@ int sdhci_start_signal_voltage_switch(struct mmc_host *mmc, if (ctrl & SDHCI_CTRL_VDD_180) return 0; - pr_warn("%s: 1.8V regulator output did not became stable\n", + pr_warn("%s: 1.8V regulator output did not become stable\n", mmc_hostname(mmc)); return -EAGAIN; diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c index bb90757ecace..b8e897e31e2e 100644 --- a/drivers/mmc/host/sdhci_am654.c +++ b/drivers/mmc/host/sdhci_am654.c @@ -12,6 +12,7 @@ #include <linux/property.h> #include <linux/regmap.h> +#include "cqhci.h" #include "sdhci-pltfm.h" /* CTL_CFG Registers */ @@ -68,6 +69,9 @@ #define CLOCK_TOO_SLOW_HZ 400000 +/* Command Queue Host Controller Interface Base address */ +#define SDHCI_AM654_CQE_BASE_ADDR 0x200 + static struct regmap_config sdhci_am654_regmap_config = { .reg_bits = 32, .val_bits = 32, @@ -259,6 +263,19 @@ static const struct sdhci_am654_driver_data sdhci_am654_drvdata = { .flags = IOMUX_PRESENT | FREQSEL_2_BIT | STRBSEL_4_BIT | DLL_PRESENT, }; +static u32 sdhci_am654_cqhci_irq(struct sdhci_host *host, u32 intmask) +{ + int cmd_error = 0; + int data_error = 0; + + if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error)) + return intmask; + + cqhci_irq(host->mmc, intmask, cmd_error, data_error); + + return 0; +} + static struct sdhci_ops sdhci_j721e_8bit_ops = { .get_max_clock = sdhci_pltfm_clk_get_max_clock, .get_timeout_clock = sdhci_pltfm_clk_get_max_clock, @@ -267,6 +284,7 @@ static struct sdhci_ops sdhci_j721e_8bit_ops = { .set_power = sdhci_am654_set_power, .set_clock = sdhci_am654_set_clock, .write_b = sdhci_am654_write_b, + .irq = sdhci_am654_cqhci_irq, .reset = sdhci_reset, }; @@ -290,6 +308,7 @@ static struct sdhci_ops sdhci_j721e_4bit_ops = { .set_power = sdhci_am654_set_power, .set_clock = sdhci_j721e_4bit_set_clock, .write_b = sdhci_am654_write_b, + .irq = sdhci_am654_cqhci_irq, .reset = sdhci_reset, }; @@ -304,6 +323,40 @@ static const struct sdhci_am654_driver_data sdhci_j721e_4bit_drvdata = { .pdata = &sdhci_j721e_4bit_pdata, .flags = IOMUX_PRESENT, }; + +static void sdhci_am654_dumpregs(struct mmc_host *mmc) +{ + sdhci_dumpregs(mmc_priv(mmc)); +} + +static const struct cqhci_host_ops sdhci_am654_cqhci_ops = { + .enable = sdhci_cqe_enable, + .disable = sdhci_cqe_disable, + .dumpregs = sdhci_am654_dumpregs, +}; + +static int sdhci_am654_cqe_add_host(struct sdhci_host *host) +{ + struct cqhci_host *cq_host; + int ret; + + cq_host = devm_kzalloc(host->mmc->parent, sizeof(struct cqhci_host), + GFP_KERNEL); + if (!cq_host) + return -ENOMEM; + + cq_host->mmio = host->ioaddr + SDHCI_AM654_CQE_BASE_ADDR; + cq_host->quirks |= CQHCI_QUIRK_SHORT_TXFR_DESC_SZ; + cq_host->caps |= CQHCI_TASK_DESC_SZ_128; + cq_host->ops = &sdhci_am654_cqhci_ops; + + host->mmc->caps2 |= MMC_CAP2_CQE; + + ret = cqhci_init(cq_host, host->mmc, 1); + + return ret; +} + static int sdhci_am654_init(struct sdhci_host *host) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); @@ -344,7 +397,23 @@ static int sdhci_am654_init(struct sdhci_host *host) regmap_update_bits(sdhci_am654->base, CTL_CFG_2, SLOTTYPE_MASK, ctl_cfg_2); - return sdhci_add_host(host); + ret = sdhci_setup_host(host); + if (ret) + return ret; + + ret = sdhci_am654_cqe_add_host(host); + if (ret) + goto err_cleanup_host; + + ret = __sdhci_add_host(host); + if (ret) + goto err_cleanup_host; + + return 0; + +err_cleanup_host: + sdhci_cleanup_host(host); + return ret; } static int sdhci_am654_get_of_property(struct platform_device *pdev, diff --git a/drivers/mmc/host/sdhci_f_sdh30.c b/drivers/mmc/host/sdhci_f_sdh30.c index f8b939e63e02..fa0dfc657c22 100644 --- a/drivers/mmc/host/sdhci_f_sdh30.c +++ b/drivers/mmc/host/sdhci_f_sdh30.c @@ -16,31 +16,7 @@ #include <linux/clk.h> #include "sdhci-pltfm.h" - -/* F_SDH30 extended Controller registers */ -#define F_SDH30_AHB_CONFIG 0x100 -#define F_SDH30_AHB_BIGED 0x00000040 -#define F_SDH30_BUSLOCK_DMA 0x00000020 -#define F_SDH30_BUSLOCK_EN 0x00000010 -#define F_SDH30_SIN 0x00000008 -#define F_SDH30_AHB_INCR_16 0x00000004 -#define F_SDH30_AHB_INCR_8 0x00000002 -#define F_SDH30_AHB_INCR_4 0x00000001 - -#define F_SDH30_TUNING_SETTING 0x108 -#define F_SDH30_CMD_CHK_DIS 0x00010000 - -#define F_SDH30_IO_CONTROL2 0x114 -#define F_SDH30_CRES_O_DN 0x00080000 -#define F_SDH30_MSEL_O_1_8 0x00040000 - -#define F_SDH30_ESD_CONTROL 0x124 -#define F_SDH30_EMMC_RST 0x00000002 -#define F_SDH30_EMMC_HS200 0x01000000 - -#define F_SDH30_CMD_DAT_DELAY 0x200 - -#define F_SDH30_MIN_CLOCK 400000 +#include "sdhci_f_sdh30.h" struct f_sdhost_priv { struct clk *clk_iface; diff --git a/drivers/mmc/host/sdhci_f_sdh30.h b/drivers/mmc/host/sdhci_f_sdh30.h new file mode 100644 index 000000000000..fc1ad28f7ca9 --- /dev/null +++ b/drivers/mmc/host/sdhci_f_sdh30.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2013 - 2015 Fujitsu Semiconductor, Ltd + * Vincent Yang <vincent.yang@tw.fujitsu.com> + * Copyright (C) 2015 Linaro Ltd Andy Green <andy.green@linaro.org> + * Copyright (C) 2019 Socionext Inc. + * + */ + +/* F_SDH30 extended Controller registers */ +#define F_SDH30_AHB_CONFIG 0x100 +#define F_SDH30_AHB_BIGED BIT(6) +#define F_SDH30_BUSLOCK_DMA BIT(5) +#define F_SDH30_BUSLOCK_EN BIT(4) +#define F_SDH30_SIN BIT(3) +#define F_SDH30_AHB_INCR_16 BIT(2) +#define F_SDH30_AHB_INCR_8 BIT(1) +#define F_SDH30_AHB_INCR_4 BIT(0) + +#define F_SDH30_TUNING_SETTING 0x108 +#define F_SDH30_CMD_CHK_DIS BIT(16) + +#define F_SDH30_IO_CONTROL2 0x114 +#define F_SDH30_CRES_O_DN BIT(19) +#define F_SDH30_MSEL_O_1_8 BIT(18) + +#define F_SDH30_ESD_CONTROL 0x124 +#define F_SDH30_EMMC_RST BIT(1) +#define F_SDH30_CMD_DAT_DELAY BIT(9) +#define F_SDH30_EMMC_HS200 BIT(24) + +#define F_SDH30_MIN_CLOCK 400000 diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h index 2f0b092d6dcc..c5ba13fae399 100644 --- a/drivers/mmc/host/tmio_mmc.h +++ b/drivers/mmc/host/tmio_mmc.h @@ -163,7 +163,6 @@ struct tmio_mmc_host { unsigned long last_req_ts; struct mutex ios_lock; /* protect set_ios() context */ bool native_hotplug; - bool runtime_synced; bool sdio_irq_enabled; /* Mandatory callback */ diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c index 9b6e1001e77c..c4a1d49fbea4 100644 --- a/drivers/mmc/host/tmio_mmc_core.c +++ b/drivers/mmc/host/tmio_mmc_core.c @@ -39,6 +39,7 @@ #include <linux/module.h> #include <linux/pagemap.h> #include <linux/platform_device.h> +#include <linux/pm_domain.h> #include <linux/pm_qos.h> #include <linux/pm_runtime.h> #include <linux/regulator/consumer.h> @@ -1184,7 +1185,7 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host) if (ret == -EPROBE_DEFER) return ret; - mmc->caps |= MMC_CAP_4_BIT_DATA | pdata->capabilities; + mmc->caps |= MMC_CAP_ERASE | MMC_CAP_4_BIT_DATA | pdata->capabilities; mmc->caps2 |= pdata->capabilities2; mmc->max_segs = pdata->max_segs ? : 32; mmc->max_blk_size = TMIO_MAX_BLK_SIZE; @@ -1248,10 +1249,12 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host) /* See if we also get DMA */ tmio_mmc_request_dma(_host, pdata); + dev_pm_domain_start(&pdev->dev); + pm_runtime_get_noresume(&pdev->dev); + pm_runtime_set_active(&pdev->dev); pm_runtime_set_autosuspend_delay(&pdev->dev, 50); pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_enable(&pdev->dev); - pm_runtime_get_sync(&pdev->dev); ret = mmc_add_host(mmc); if (ret) @@ -1333,11 +1336,6 @@ int tmio_mmc_host_runtime_resume(struct device *dev) { struct tmio_mmc_host *host = dev_get_drvdata(dev); - if (!host->runtime_synced) { - host->runtime_synced = true; - return 0; - } - tmio_mmc_clk_enable(host); tmio_mmc_hw_reset(host->mmc); diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c index a3680c900689..6ced1b7f642f 100644 --- a/drivers/mmc/host/vub300.c +++ b/drivers/mmc/host/vub300.c @@ -2070,18 +2070,11 @@ static void vub300_enable_sdio_irq(struct mmc_host *mmc, int enable) kref_put(&vub300->kref, vub300_delete); } -static void vub300_init_card(struct mmc_host *mmc, struct mmc_card *card) -{ /* NOT irq */ - struct vub300_mmc_host *vub300 = mmc_priv(mmc); - dev_info(&vub300->udev->dev, "NO host QUIRKS for this card\n"); -} - static const struct mmc_host_ops vub300_mmc_ops = { .request = vub300_mmc_request, .set_ios = vub300_mmc_set_ios, .get_ro = vub300_mmc_get_ro, .enable_sdio_irq = vub300_enable_sdio_irq, - .init_card = vub300_init_card, }; static int vub300_probe(struct usb_interface *interface, |