summaryrefslogtreecommitdiff
path: root/drivers/mmc/host/sdhci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host/sdhci.c')
-rw-r--r--drivers/mmc/host/sdhci.c289
1 files changed, 214 insertions, 75 deletions
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 1b3fbd9bd5c5..99bdae53fa2e 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -123,6 +123,29 @@ EXPORT_SYMBOL_GPL(sdhci_dumpregs);
* *
\*****************************************************************************/
+static void sdhci_do_enable_v4_mode(struct sdhci_host *host)
+{
+ u16 ctrl2;
+
+ ctrl2 = sdhci_readb(host, SDHCI_HOST_CONTROL2);
+ if (ctrl2 & SDHCI_CTRL_V4_MODE)
+ return;
+
+ ctrl2 |= SDHCI_CTRL_V4_MODE;
+ sdhci_writeb(host, ctrl2, SDHCI_HOST_CONTROL);
+}
+
+/*
+ * This can be called before sdhci_add_host() by Vendor's host controller
+ * driver to enable v4 mode if supported.
+ */
+void sdhci_enable_v4_mode(struct sdhci_host *host)
+{
+ host->v4_mode = true;
+ sdhci_do_enable_v4_mode(host);
+}
+EXPORT_SYMBOL_GPL(sdhci_enable_v4_mode);
+
static inline bool sdhci_data_line_cmd(struct mmc_command *cmd)
{
return cmd->data || cmd->flags & MMC_RSP_BUSY;
@@ -243,6 +266,52 @@ static void sdhci_set_default_irqs(struct sdhci_host *host)
sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
}
+static void sdhci_config_dma(struct sdhci_host *host)
+{
+ u8 ctrl;
+ u16 ctrl2;
+
+ if (host->version < SDHCI_SPEC_200)
+ return;
+
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+
+ /*
+ * Always adjust the DMA selection as some controllers
+ * (e.g. JMicron) can't do PIO properly when the selection
+ * is ADMA.
+ */
+ ctrl &= ~SDHCI_CTRL_DMA_MASK;
+ if (!(host->flags & SDHCI_REQ_USE_DMA))
+ goto out;
+
+ /* Note if DMA Select is zero then SDMA is selected */
+ if (host->flags & SDHCI_USE_ADMA)
+ ctrl |= SDHCI_CTRL_ADMA32;
+
+ if (host->flags & SDHCI_USE_64_BIT_DMA) {
+ /*
+ * If v4 mode, all supported DMA can be 64-bit addressing if
+ * controller supports 64-bit system address, otherwise only
+ * ADMA can support 64-bit addressing.
+ */
+ if (host->v4_mode) {
+ ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ ctrl2 |= SDHCI_CTRL_64BIT_ADDR;
+ sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
+ } else if (host->flags & SDHCI_USE_ADMA) {
+ /*
+ * Don't need to undo SDHCI_CTRL_ADMA32 in order to
+ * set SDHCI_CTRL_ADMA64.
+ */
+ ctrl |= SDHCI_CTRL_ADMA64;
+ }
+ }
+
+out:
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+}
+
static void sdhci_init(struct sdhci_host *host, int soft)
{
struct mmc_host *mmc = host->mmc;
@@ -252,6 +321,9 @@ static void sdhci_init(struct sdhci_host *host, int soft)
else
sdhci_do_reset(host, SDHCI_RESET_ALL);
+ if (host->v4_mode)
+ sdhci_do_enable_v4_mode(host);
+
sdhci_set_default_irqs(host);
host->cqe_on = false;
@@ -554,10 +626,10 @@ static void sdhci_kunmap_atomic(void *buffer, unsigned long *flags)
local_irq_restore(*flags);
}
-static void sdhci_adma_write_desc(struct sdhci_host *host, void *desc,
- dma_addr_t addr, int len, unsigned cmd)
+void sdhci_adma_write_desc(struct sdhci_host *host, void **desc,
+ dma_addr_t addr, int len, unsigned int cmd)
{
- struct sdhci_adma2_64_desc *dma_desc = desc;
+ struct sdhci_adma2_64_desc *dma_desc = *desc;
/* 32-bit and 64-bit descriptors have these members in same position */
dma_desc->cmd = cpu_to_le16(cmd);
@@ -566,6 +638,19 @@ static void sdhci_adma_write_desc(struct sdhci_host *host, void *desc,
if (host->flags & SDHCI_USE_64_BIT_DMA)
dma_desc->addr_hi = cpu_to_le32((u64)addr >> 32);
+
+ *desc += host->desc_sz;
+}
+EXPORT_SYMBOL_GPL(sdhci_adma_write_desc);
+
+static inline void __sdhci_adma_write_desc(struct sdhci_host *host,
+ void **desc, dma_addr_t addr,
+ int len, unsigned int cmd)
+{
+ if (host->ops->adma_write_desc)
+ host->ops->adma_write_desc(host, desc, addr, len, cmd);
+ else
+ sdhci_adma_write_desc(host, desc, addr, len, cmd);
}
static void sdhci_adma_mark_end(void *desc)
@@ -618,28 +703,24 @@ static void sdhci_adma_table_pre(struct sdhci_host *host,
}
/* tran, valid */
- sdhci_adma_write_desc(host, desc, align_addr, offset,
- ADMA2_TRAN_VALID);
+ __sdhci_adma_write_desc(host, &desc, align_addr,
+ offset, ADMA2_TRAN_VALID);
BUG_ON(offset > 65536);
align += SDHCI_ADMA2_ALIGN;
align_addr += SDHCI_ADMA2_ALIGN;
- desc += host->desc_sz;
-
addr += offset;
len -= offset;
}
BUG_ON(len > 65536);
- if (len) {
- /* tran, valid */
- sdhci_adma_write_desc(host, desc, addr, len,
- ADMA2_TRAN_VALID);
- desc += host->desc_sz;
- }
+ /* tran, valid */
+ if (len)
+ __sdhci_adma_write_desc(host, &desc, addr, len,
+ ADMA2_TRAN_VALID);
/*
* If this triggers then we have a calculation bug
@@ -656,7 +737,7 @@ static void sdhci_adma_table_pre(struct sdhci_host *host,
}
} else {
/* Add a terminating entry - nop, end, valid */
- sdhci_adma_write_desc(host, desc, 0, 0, ADMA2_NOP_END_VALID);
+ __sdhci_adma_write_desc(host, &desc, 0, 0, ADMA2_NOP_END_VALID);
}
}
@@ -701,7 +782,7 @@ static void sdhci_adma_table_post(struct sdhci_host *host,
}
}
-static u32 sdhci_sdma_address(struct sdhci_host *host)
+static dma_addr_t sdhci_sdma_address(struct sdhci_host *host)
{
if (host->bounce_buffer)
return host->bounce_addr;
@@ -709,6 +790,17 @@ static u32 sdhci_sdma_address(struct sdhci_host *host)
return sg_dma_address(host->data->sg);
}
+static void sdhci_set_sdma_addr(struct sdhci_host *host, dma_addr_t addr)
+{
+ if (host->v4_mode) {
+ sdhci_writel(host, addr, SDHCI_ADMA_ADDRESS);
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ sdhci_writel(host, (u64)addr >> 32, SDHCI_ADMA_ADDRESS_HI);
+ } else {
+ sdhci_writel(host, addr, SDHCI_DMA_ADDRESS);
+ }
+}
+
static unsigned int sdhci_target_timeout(struct sdhci_host *host,
struct mmc_command *cmd,
struct mmc_data *data)
@@ -876,7 +968,6 @@ static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
{
- u8 ctrl;
struct mmc_data *data = cmd->data;
host->data_timeout = 0;
@@ -968,30 +1059,11 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
SDHCI_ADMA_ADDRESS_HI);
} else {
WARN_ON(sg_cnt != 1);
- sdhci_writel(host, sdhci_sdma_address(host),
- SDHCI_DMA_ADDRESS);
+ sdhci_set_sdma_addr(host, sdhci_sdma_address(host));
}
}
- /*
- * Always adjust the DMA selection as some controllers
- * (e.g. JMicron) can't do PIO properly when the selection
- * is ADMA.
- */
- if (host->version >= SDHCI_SPEC_200) {
- ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
- ctrl &= ~SDHCI_CTRL_DMA_MASK;
- if ((host->flags & SDHCI_REQ_USE_DMA) &&
- (host->flags & SDHCI_USE_ADMA)) {
- if (host->flags & SDHCI_USE_64_BIT_DMA)
- ctrl |= SDHCI_CTRL_ADMA64;
- else
- ctrl |= SDHCI_CTRL_ADMA32;
- } else {
- ctrl |= SDHCI_CTRL_SDMA;
- }
- sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
- }
+ sdhci_config_dma(host);
if (!(host->flags & SDHCI_REQ_USE_DMA)) {
int flags;
@@ -1010,7 +1082,19 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
/* Set the DMA boundary value and block size */
sdhci_writew(host, SDHCI_MAKE_BLKSZ(host->sdma_boundary, data->blksz),
SDHCI_BLOCK_SIZE);
- sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
+
+ /*
+ * For Version 4.10 onwards, if v4 mode is enabled, 32-bit Block Count
+ * can be supported, in that case 16-bit block count register must be 0.
+ */
+ if (host->version >= SDHCI_SPEC_410 && host->v4_mode &&
+ (host->quirks2 & SDHCI_QUIRK2_USE_32BIT_BLK_CNT)) {
+ if (sdhci_readw(host, SDHCI_BLOCK_COUNT))
+ sdhci_writew(host, 0, SDHCI_BLOCK_COUNT);
+ sdhci_writew(host, data->blocks, SDHCI_32BIT_BLK_CNT);
+ } else {
+ sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
+ }
}
static inline bool sdhci_auto_cmd12(struct sdhci_host *host,
@@ -1020,6 +1104,43 @@ static inline bool sdhci_auto_cmd12(struct sdhci_host *host,
!mrq->cap_cmd_during_tfr;
}
+static inline void sdhci_auto_cmd_select(struct sdhci_host *host,
+ struct mmc_command *cmd,
+ u16 *mode)
+{
+ bool use_cmd12 = sdhci_auto_cmd12(host, cmd->mrq) &&
+ (cmd->opcode != SD_IO_RW_EXTENDED);
+ bool use_cmd23 = cmd->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23);
+ u16 ctrl2;
+
+ /*
+ * In case of Version 4.10 or later, use of 'Auto CMD Auto
+ * Select' is recommended rather than use of 'Auto CMD12
+ * Enable' or 'Auto CMD23 Enable'.
+ */
+ if (host->version >= SDHCI_SPEC_410 && (use_cmd12 || use_cmd23)) {
+ *mode |= SDHCI_TRNS_AUTO_SEL;
+
+ ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ if (use_cmd23)
+ ctrl2 |= SDHCI_CMD23_ENABLE;
+ else
+ ctrl2 &= ~SDHCI_CMD23_ENABLE;
+ sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
+
+ return;
+ }
+
+ /*
+ * If we are sending CMD23, CMD12 never gets sent
+ * on successful completion (so no Auto-CMD12).
+ */
+ if (use_cmd12)
+ *mode |= SDHCI_TRNS_AUTO_CMD12;
+ else if (use_cmd23)
+ *mode |= SDHCI_TRNS_AUTO_CMD23;
+}
+
static void sdhci_set_transfer_mode(struct sdhci_host *host,
struct mmc_command *cmd)
{
@@ -1048,17 +1169,9 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
if (mmc_op_multi(cmd->opcode) || data->blocks > 1) {
mode = SDHCI_TRNS_BLK_CNT_EN | SDHCI_TRNS_MULTI;
- /*
- * If we are sending CMD23, CMD12 never gets sent
- * on successful completion (so no Auto-CMD12).
- */
- if (sdhci_auto_cmd12(host, cmd->mrq) &&
- (cmd->opcode != SD_IO_RW_EXTENDED))
- mode |= SDHCI_TRNS_AUTO_CMD12;
- else if (cmd->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23)) {
- mode |= SDHCI_TRNS_AUTO_CMD23;
+ sdhci_auto_cmd_select(host, cmd, &mode);
+ if (cmd->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23))
sdhci_writel(host, cmd->mrq->sbc->arg, SDHCI_ARGUMENT2);
- }
}
if (data->flags & MMC_DATA_READ)
@@ -1630,7 +1743,7 @@ EXPORT_SYMBOL_GPL(sdhci_set_power);
* *
\*****************************************************************************/
-static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
+void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct sdhci_host *host;
int present;
@@ -1669,6 +1782,7 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
mmiowb();
spin_unlock_irqrestore(&host->lock, flags);
}
+EXPORT_SYMBOL_GPL(sdhci_request);
void sdhci_set_bus_width(struct sdhci_host *host, int width)
{
@@ -2219,7 +2333,7 @@ void sdhci_send_tuning(struct sdhci_host *host, u32 opcode)
}
EXPORT_SYMBOL_GPL(sdhci_send_tuning);
-static void __sdhci_execute_tuning(struct sdhci_host *host, u32 opcode)
+static int __sdhci_execute_tuning(struct sdhci_host *host, u32 opcode)
{
int i;
@@ -2236,13 +2350,13 @@ static void __sdhci_execute_tuning(struct sdhci_host *host, u32 opcode)
pr_info("%s: Tuning timeout, falling back to fixed sampling clock\n",
mmc_hostname(host->mmc));
sdhci_abort_tuning(host, opcode);
- return;
+ return -ETIMEDOUT;
}
ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) {
if (ctrl & SDHCI_CTRL_TUNED_CLK)
- return; /* Success! */
+ return 0; /* Success! */
break;
}
@@ -2254,6 +2368,7 @@ static void __sdhci_execute_tuning(struct sdhci_host *host, u32 opcode)
pr_info("%s: Tuning failed, falling back to fixed sampling clock\n",
mmc_hostname(host->mmc));
sdhci_reset_tuning(host);
+ return -EAGAIN;
}
int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
@@ -2315,7 +2430,7 @@ int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
sdhci_start_tuning(host);
- __sdhci_execute_tuning(host, opcode);
+ host->tuning_err = __sdhci_execute_tuning(host, opcode);
sdhci_end_tuning(host);
out:
@@ -2802,7 +2917,7 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
* some controllers are faulty, don't trust them.
*/
if (intmask & SDHCI_INT_DMA_END) {
- u32 dmastart, dmanow;
+ dma_addr_t dmastart, dmanow;
dmastart = sdhci_sdma_address(host);
dmanow = dmastart + host->data->bytes_xfered;
@@ -2810,12 +2925,12 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
* Force update to the next DMA block boundary.
*/
dmanow = (dmanow &
- ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
+ ~((dma_addr_t)SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
SDHCI_DEFAULT_BOUNDARY_SIZE;
host->data->bytes_xfered = dmanow - dmastart;
- DBG("DMA base 0x%08x, transferred 0x%06x bytes, next 0x%08x\n",
- dmastart, host->data->bytes_xfered, dmanow);
- sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
+ DBG("DMA base %pad, transferred 0x%06x bytes, next %pad\n",
+ &dmastart, host->data->bytes_xfered, &dmanow);
+ sdhci_set_sdma_addr(host, dmanow);
}
if (intmask & SDHCI_INT_DATA_END) {
@@ -3322,6 +3437,13 @@ struct sdhci_host *sdhci_alloc_host(struct device *dev,
host->sdma_boundary = SDHCI_DEFAULT_BOUNDARY_ARG;
+ /*
+ * The DMA table descriptor count is calculated as the maximum
+ * number of segments times 2, to allow for an alignment
+ * descriptor for each segment, plus 1 for a nop end descriptor.
+ */
+ host->adma_table_cnt = SDHCI_MAX_SEGS * 2 + 1;
+
return host;
}
@@ -3376,6 +3498,9 @@ void __sdhci_read_caps(struct sdhci_host *host, u16 *ver, u32 *caps, u32 *caps1)
sdhci_do_reset(host, SDHCI_RESET_ALL);
+ if (host->v4_mode)
+ sdhci_do_enable_v4_mode(host);
+
of_property_read_u64(mmc_dev(host->mmc)->of_node,
"sdhci-caps-mask", &dt_caps_mask);
of_property_read_u64(mmc_dev(host->mmc)->of_node,
@@ -3470,6 +3595,19 @@ static int sdhci_allocate_bounce_buffer(struct sdhci_host *host)
return 0;
}
+static inline bool sdhci_can_64bit_dma(struct sdhci_host *host)
+{
+ /*
+ * According to SD Host Controller spec v4.10, bit[27] added from
+ * version 4.10 in Capabilities Register is used as 64-bit System
+ * Address support for V4 mode.
+ */
+ if (host->version >= SDHCI_SPEC_410 && host->v4_mode)
+ return host->caps & SDHCI_CAN_64BIT_V4;
+
+ return host->caps & SDHCI_CAN_64BIT;
+}
+
int sdhci_setup_host(struct sdhci_host *host)
{
struct mmc_host *mmc;
@@ -3506,7 +3644,7 @@ int sdhci_setup_host(struct sdhci_host *host)
override_timeout_clk = host->timeout_clk;
- if (host->version > SDHCI_SPEC_300) {
+ if (host->version > SDHCI_SPEC_420) {
pr_err("%s: Unknown controller version (%d). You may experience problems.\n",
mmc_hostname(mmc), host->version);
}
@@ -3541,7 +3679,7 @@ int sdhci_setup_host(struct sdhci_host *host)
* SDHCI_QUIRK2_BROKEN_64_BIT_DMA must be left to the drivers to
* implement.
*/
- if (host->caps & SDHCI_CAN_64BIT)
+ if (sdhci_can_64bit_dma(host))
host->flags |= SDHCI_USE_64_BIT_DMA;
if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
@@ -3559,32 +3697,30 @@ int sdhci_setup_host(struct sdhci_host *host)
}
}
- /* SDMA does not support 64-bit DMA */
- if (host->flags & SDHCI_USE_64_BIT_DMA)
+ /* SDMA does not support 64-bit DMA if v4 mode not set */
+ if ((host->flags & SDHCI_USE_64_BIT_DMA) && !host->v4_mode)
host->flags &= ~SDHCI_USE_SDMA;
if (host->flags & SDHCI_USE_ADMA) {
dma_addr_t dma;
void *buf;
- /*
- * The DMA descriptor table size is calculated as the maximum
- * number of segments times 2, to allow for an alignment
- * descriptor for each segment, plus 1 for a nop end descriptor,
- * all multipled by the descriptor size.
- */
if (host->flags & SDHCI_USE_64_BIT_DMA) {
- host->adma_table_sz = (SDHCI_MAX_SEGS * 2 + 1) *
- SDHCI_ADMA2_64_DESC_SZ;
- host->desc_sz = SDHCI_ADMA2_64_DESC_SZ;
+ host->adma_table_sz = host->adma_table_cnt *
+ SDHCI_ADMA2_64_DESC_SZ(host);
+ host->desc_sz = SDHCI_ADMA2_64_DESC_SZ(host);
} else {
- host->adma_table_sz = (SDHCI_MAX_SEGS * 2 + 1) *
+ host->adma_table_sz = host->adma_table_cnt *
SDHCI_ADMA2_32_DESC_SZ;
host->desc_sz = SDHCI_ADMA2_32_DESC_SZ;
}
host->align_buffer_sz = SDHCI_MAX_SEGS * SDHCI_ADMA2_ALIGN;
- buf = dma_alloc_coherent(mmc_dev(mmc), host->align_buffer_sz +
+ /*
+ * Use zalloc to zero the reserved high 32-bits of 128-bit
+ * descriptors so that they never need to be written.
+ */
+ buf = dma_zalloc_coherent(mmc_dev(mmc), host->align_buffer_sz +
host->adma_table_sz, &dma, GFP_KERNEL);
if (!buf) {
pr_warn("%s: Unable to allocate ADMA buffers - falling back to standard DMA\n",
@@ -3708,10 +3844,13 @@ int sdhci_setup_host(struct sdhci_host *host)
if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12)
host->flags |= SDHCI_AUTO_CMD12;
- /* Auto-CMD23 stuff only works in ADMA or PIO. */
+ /*
+ * For v3 mode, Auto-CMD23 stuff only works in ADMA or PIO.
+ * For v4 mode, SDMA may use Auto-CMD23 as well.
+ */
if ((host->version >= SDHCI_SPEC_300) &&
((host->flags & SDHCI_USE_ADMA) ||
- !(host->flags & SDHCI_USE_SDMA)) &&
+ !(host->flags & SDHCI_USE_SDMA) || host->v4_mode) &&
!(host->quirks2 & SDHCI_QUIRK2_ACMD23_BROKEN)) {
host->flags |= SDHCI_AUTO_CMD23;
DBG("Auto-CMD23 available\n");