diff options
Diffstat (limited to 'drivers/mmc/host/sdhci-sprd.c')
| -rw-r--r-- | drivers/mmc/host/sdhci-sprd.c | 498 |
1 files changed, 498 insertions, 0 deletions
diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c new file mode 100644 index 000000000000..9a822e2e9f0b --- /dev/null +++ b/drivers/mmc/host/sdhci-sprd.c @@ -0,0 +1,498 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Secure Digital Host Controller +// +// Copyright (C) 2018 Spreadtrum, Inc. +// Author: Chunyan Zhang <chunyan.zhang@unisoc.com> + +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/highmem.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> + +#include "sdhci-pltfm.h" + +/* SDHCI_ARGUMENT2 register high 16bit */ +#define SDHCI_SPRD_ARG2_STUFF GENMASK(31, 16) + +#define SDHCI_SPRD_REG_32_DLL_DLY_OFFSET 0x208 +#define SDHCIBSPRD_IT_WR_DLY_INV BIT(5) +#define SDHCI_SPRD_BIT_CMD_DLY_INV BIT(13) +#define SDHCI_SPRD_BIT_POSRD_DLY_INV BIT(21) +#define SDHCI_SPRD_BIT_NEGRD_DLY_INV BIT(29) + +#define SDHCI_SPRD_REG_32_BUSY_POSI 0x250 +#define SDHCI_SPRD_BIT_OUTR_CLK_AUTO_EN BIT(25) +#define SDHCI_SPRD_BIT_INNR_CLK_AUTO_EN BIT(24) + +#define SDHCI_SPRD_REG_DEBOUNCE 0x28C +#define SDHCI_SPRD_BIT_DLL_BAK BIT(0) +#define SDHCI_SPRD_BIT_DLL_VAL BIT(1) + +#define SDHCI_SPRD_INT_SIGNAL_MASK 0x1B7F410B + +/* SDHCI_HOST_CONTROL2 */ +#define SDHCI_SPRD_CTRL_HS200 0x0005 +#define SDHCI_SPRD_CTRL_HS400 0x0006 + +/* + * According to the standard specification, BIT(3) of SDHCI_SOFTWARE_RESET is + * reserved, and only used on Spreadtrum's design, the hardware cannot work + * if this bit is cleared. + * 1 : normal work + * 0 : hardware reset + */ +#define SDHCI_HW_RESET_CARD BIT(3) + +#define SDHCI_SPRD_MAX_CUR 0xFFFFFF +#define SDHCI_SPRD_CLK_MAX_DIV 1023 + +#define SDHCI_SPRD_CLK_DEF_RATE 26000000 + +struct sdhci_sprd_host { + u32 version; + struct clk *clk_sdio; + struct clk *clk_enable; + u32 base_rate; + int flags; /* backup of host attribute */ +}; + +#define TO_SPRD_HOST(host) sdhci_pltfm_priv(sdhci_priv(host)) + +static void sdhci_sprd_init_config(struct sdhci_host *host) +{ + u16 val; + + /* set dll backup mode */ + val = sdhci_readl(host, SDHCI_SPRD_REG_DEBOUNCE); + val |= SDHCI_SPRD_BIT_DLL_BAK | SDHCI_SPRD_BIT_DLL_VAL; + sdhci_writel(host, val, SDHCI_SPRD_REG_DEBOUNCE); +} + +static inline u32 sdhci_sprd_readl(struct sdhci_host *host, int reg) +{ + if (unlikely(reg == SDHCI_MAX_CURRENT)) + return SDHCI_SPRD_MAX_CUR; + + return readl_relaxed(host->ioaddr + reg); +} + +static inline void sdhci_sprd_writel(struct sdhci_host *host, u32 val, int reg) +{ + /* SDHCI_MAX_CURRENT is reserved on Spreadtrum's platform */ + if (unlikely(reg == SDHCI_MAX_CURRENT)) + return; + + if (unlikely(reg == SDHCI_SIGNAL_ENABLE || reg == SDHCI_INT_ENABLE)) + val = val & SDHCI_SPRD_INT_SIGNAL_MASK; + + writel_relaxed(val, host->ioaddr + reg); +} + +static inline void sdhci_sprd_writew(struct sdhci_host *host, u16 val, int reg) +{ + /* SDHCI_BLOCK_COUNT is Read Only on Spreadtrum's platform */ + if (unlikely(reg == SDHCI_BLOCK_COUNT)) + return; + + writew_relaxed(val, host->ioaddr + reg); +} + +static inline void sdhci_sprd_writeb(struct sdhci_host *host, u8 val, int reg) +{ + /* + * Since BIT(3) of SDHCI_SOFTWARE_RESET is reserved according to the + * standard specification, sdhci_reset() write this register directly + * without checking other reserved bits, that will clear BIT(3) which + * is defined as hardware reset on Spreadtrum's platform and clearing + * it by mistake will lead the card not work. So here we need to work + * around it. + */ + if (unlikely(reg == SDHCI_SOFTWARE_RESET)) { + if (readb_relaxed(host->ioaddr + reg) & SDHCI_HW_RESET_CARD) + val |= SDHCI_HW_RESET_CARD; + } + + writeb_relaxed(val, host->ioaddr + reg); +} + +static inline void sdhci_sprd_sd_clk_off(struct sdhci_host *host) +{ + u16 ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + + ctrl &= ~SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, ctrl, SDHCI_CLOCK_CONTROL); +} + +static inline void +sdhci_sprd_set_dll_invert(struct sdhci_host *host, u32 mask, bool en) +{ + u32 dll_dly_offset; + + dll_dly_offset = sdhci_readl(host, SDHCI_SPRD_REG_32_DLL_DLY_OFFSET); + if (en) + dll_dly_offset |= mask; + else + dll_dly_offset &= ~mask; + sdhci_writel(host, dll_dly_offset, SDHCI_SPRD_REG_32_DLL_DLY_OFFSET); +} + +static inline u32 sdhci_sprd_calc_div(u32 base_clk, u32 clk) +{ + u32 div; + + /* select 2x clock source */ + if (base_clk <= clk * 2) + return 0; + + div = (u32) (base_clk / (clk * 2)); + + if ((base_clk / div) > (clk * 2)) + div++; + + if (div > SDHCI_SPRD_CLK_MAX_DIV) + div = SDHCI_SPRD_CLK_MAX_DIV; + + if (div % 2) + div = (div + 1) / 2; + else + div = div / 2; + + return div; +} + +static inline void _sdhci_sprd_set_clock(struct sdhci_host *host, + unsigned int clk) +{ + struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host); + u32 div, val, mask; + + div = sdhci_sprd_calc_div(sprd_host->base_rate, clk); + + clk |= ((div & 0x300) >> 2) | ((div & 0xFF) << 8); + sdhci_enable_clk(host, clk); + + /* enable auto gate sdhc_enable_auto_gate */ + val = sdhci_readl(host, SDHCI_SPRD_REG_32_BUSY_POSI); + mask = SDHCI_SPRD_BIT_OUTR_CLK_AUTO_EN | + SDHCI_SPRD_BIT_INNR_CLK_AUTO_EN; + if (mask != (val & mask)) { + val |= mask; + sdhci_writel(host, val, SDHCI_SPRD_REG_32_BUSY_POSI); + } +} + +static void sdhci_sprd_set_clock(struct sdhci_host *host, unsigned int clock) +{ + bool en = false; + + if (clock == 0) { + sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); + } else if (clock != host->clock) { + sdhci_sprd_sd_clk_off(host); + _sdhci_sprd_set_clock(host, clock); + + if (clock <= 400000) + en = true; + sdhci_sprd_set_dll_invert(host, SDHCI_SPRD_BIT_CMD_DLY_INV | + SDHCI_SPRD_BIT_POSRD_DLY_INV, en); + } else { + _sdhci_sprd_set_clock(host, clock); + } +} + +static unsigned int sdhci_sprd_get_max_clock(struct sdhci_host *host) +{ + struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host); + + return clk_round_rate(sprd_host->clk_sdio, ULONG_MAX); +} + +static unsigned int sdhci_sprd_get_min_clock(struct sdhci_host *host) +{ + return 400000; +} + +static void sdhci_sprd_set_uhs_signaling(struct sdhci_host *host, + unsigned int timing) +{ + u16 ctrl_2; + + if (timing == host->timing) + return; + + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + /* Select Bus Speed Mode for host */ + ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; + switch (timing) { + case MMC_TIMING_UHS_SDR12: + ctrl_2 |= SDHCI_CTRL_UHS_SDR12; + break; + case MMC_TIMING_MMC_HS: + case MMC_TIMING_SD_HS: + case MMC_TIMING_UHS_SDR25: + ctrl_2 |= SDHCI_CTRL_UHS_SDR25; + break; + case MMC_TIMING_UHS_SDR50: + ctrl_2 |= SDHCI_CTRL_UHS_SDR50; + break; + case MMC_TIMING_UHS_SDR104: + ctrl_2 |= SDHCI_CTRL_UHS_SDR104; + break; + case MMC_TIMING_UHS_DDR50: + case MMC_TIMING_MMC_DDR52: + ctrl_2 |= SDHCI_CTRL_UHS_DDR50; + break; + case MMC_TIMING_MMC_HS200: + ctrl_2 |= SDHCI_SPRD_CTRL_HS200; + break; + case MMC_TIMING_MMC_HS400: + ctrl_2 |= SDHCI_SPRD_CTRL_HS400; + break; + default: + break; + } + + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); +} + +static void sdhci_sprd_hw_reset(struct sdhci_host *host) +{ + int val; + + /* + * Note: don't use sdhci_writeb() API here since it is redirected to + * sdhci_sprd_writeb() in which we have a workaround for + * SDHCI_SOFTWARE_RESET which would make bit SDHCI_HW_RESET_CARD can + * not be cleared. + */ + val = readb_relaxed(host->ioaddr + SDHCI_SOFTWARE_RESET); + val &= ~SDHCI_HW_RESET_CARD; + writeb_relaxed(val, host->ioaddr + SDHCI_SOFTWARE_RESET); + /* wait for 10 us */ + usleep_range(10, 20); + + val |= SDHCI_HW_RESET_CARD; + writeb_relaxed(val, host->ioaddr + SDHCI_SOFTWARE_RESET); + usleep_range(300, 500); +} + +static struct sdhci_ops sdhci_sprd_ops = { + .read_l = sdhci_sprd_readl, + .write_l = sdhci_sprd_writel, + .write_b = sdhci_sprd_writeb, + .set_clock = sdhci_sprd_set_clock, + .get_max_clock = sdhci_sprd_get_max_clock, + .get_min_clock = sdhci_sprd_get_min_clock, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_reset, + .set_uhs_signaling = sdhci_sprd_set_uhs_signaling, + .hw_reset = sdhci_sprd_hw_reset, +}; + +static void sdhci_sprd_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host); + + host->flags |= sprd_host->flags & SDHCI_AUTO_CMD23; + + /* + * From version 4.10 onward, ARGUMENT2 register is also as 32-bit + * block count register which doesn't support stuff bits of + * CMD23 argument on Spreadtrum's sd host controller. + */ + if (host->version >= SDHCI_SPEC_410 && + mrq->sbc && (mrq->sbc->arg & SDHCI_SPRD_ARG2_STUFF) && + (host->flags & SDHCI_AUTO_CMD23)) + host->flags &= ~SDHCI_AUTO_CMD23; + + sdhci_request(mmc, mrq); +} + +static const struct sdhci_pltfm_data sdhci_sprd_pdata = { + .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK, + .quirks2 = SDHCI_QUIRK2_BROKEN_HS200 | + SDHCI_QUIRK2_USE_32BIT_BLK_CNT, + .ops = &sdhci_sprd_ops, +}; + +static int sdhci_sprd_probe(struct platform_device *pdev) +{ + struct sdhci_host *host; + struct sdhci_sprd_host *sprd_host; + struct clk *clk; + int ret = 0; + + host = sdhci_pltfm_init(pdev, &sdhci_sprd_pdata, sizeof(*sprd_host)); + if (IS_ERR(host)) + return PTR_ERR(host); + + host->dma_mask = DMA_BIT_MASK(64); + pdev->dev.dma_mask = &host->dma_mask; + host->mmc_host_ops.request = sdhci_sprd_request; + + host->mmc->caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED | + MMC_CAP_ERASE | MMC_CAP_CMD23; + ret = mmc_of_parse(host->mmc); + if (ret) + goto pltfm_free; + + sprd_host = TO_SPRD_HOST(host); + + clk = devm_clk_get(&pdev->dev, "sdio"); + if (IS_ERR(clk)) { + ret = PTR_ERR(clk); + goto pltfm_free; + } + sprd_host->clk_sdio = clk; + sprd_host->base_rate = clk_get_rate(sprd_host->clk_sdio); + if (!sprd_host->base_rate) + sprd_host->base_rate = SDHCI_SPRD_CLK_DEF_RATE; + + clk = devm_clk_get(&pdev->dev, "enable"); + if (IS_ERR(clk)) { + ret = PTR_ERR(clk); + goto pltfm_free; + } + sprd_host->clk_enable = clk; + + ret = clk_prepare_enable(sprd_host->clk_sdio); + if (ret) + goto pltfm_free; + + clk_prepare_enable(sprd_host->clk_enable); + if (ret) + goto clk_disable; + + sdhci_sprd_init_config(host); + host->version = sdhci_readw(host, SDHCI_HOST_VERSION); + sprd_host->version = ((host->version & SDHCI_VENDOR_VER_MASK) >> + SDHCI_VENDOR_VER_SHIFT); + + pm_runtime_get_noresume(&pdev->dev); + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, 50); + pm_runtime_use_autosuspend(&pdev->dev); + pm_suspend_ignore_children(&pdev->dev, 1); + + sdhci_enable_v4_mode(host); + + ret = sdhci_setup_host(host); + if (ret) + goto pm_runtime_disable; + + sprd_host->flags = host->flags; + + ret = __sdhci_add_host(host); + if (ret) + goto err_cleanup_host; + + pm_runtime_mark_last_busy(&pdev->dev); + pm_runtime_put_autosuspend(&pdev->dev); + + return 0; + +err_cleanup_host: + sdhci_cleanup_host(host); + +pm_runtime_disable: + pm_runtime_disable(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); + + clk_disable_unprepare(sprd_host->clk_enable); + +clk_disable: + clk_disable_unprepare(sprd_host->clk_sdio); + +pltfm_free: + sdhci_pltfm_free(pdev); + return ret; +} + +static int sdhci_sprd_remove(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host); + struct mmc_host *mmc = host->mmc; + + mmc_remove_host(mmc); + clk_disable_unprepare(sprd_host->clk_sdio); + clk_disable_unprepare(sprd_host->clk_enable); + + mmc_free_host(mmc); + + return 0; +} + +static const struct of_device_id sdhci_sprd_of_match[] = { + { .compatible = "sprd,sdhci-r11", }, + { } +}; +MODULE_DEVICE_TABLE(of, sdhci_sprd_of_match); + +#ifdef CONFIG_PM +static int sdhci_sprd_runtime_suspend(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host); + + sdhci_runtime_suspend_host(host); + + clk_disable_unprepare(sprd_host->clk_sdio); + clk_disable_unprepare(sprd_host->clk_enable); + + return 0; +} + +static int sdhci_sprd_runtime_resume(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host); + int ret; + + ret = clk_prepare_enable(sprd_host->clk_enable); + if (ret) + return ret; + + ret = clk_prepare_enable(sprd_host->clk_sdio); + if (ret) { + clk_disable_unprepare(sprd_host->clk_enable); + return ret; + } + + sdhci_runtime_resume_host(host); + + return 0; +} +#endif + +static const struct dev_pm_ops sdhci_sprd_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) + SET_RUNTIME_PM_OPS(sdhci_sprd_runtime_suspend, + sdhci_sprd_runtime_resume, NULL) +}; + +static struct platform_driver sdhci_sprd_driver = { + .probe = sdhci_sprd_probe, + .remove = sdhci_sprd_remove, + .driver = { + .name = "sdhci_sprd_r11", + .of_match_table = of_match_ptr(sdhci_sprd_of_match), + .pm = &sdhci_sprd_pm_ops, + }, +}; +module_platform_driver(sdhci_sprd_driver); + +MODULE_DESCRIPTION("Spreadtrum sdio host controller r11 driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:sdhci-sprd-r11"); |