diff options
Diffstat (limited to 'drivers/mmc/host/mmci.h')
| -rw-r--r-- | drivers/mmc/host/mmci.h | 174 |
1 files changed, 136 insertions, 38 deletions
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index 517591d219e9..550dd3914461 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -23,6 +23,14 @@ #define MCI_ST_DATA31DIREN (1 << 5) #define MCI_ST_FBCLKEN (1 << 7) #define MCI_ST_DATA74DIREN (1 << 8) +/* + * The STM32 sdmmc does not have PWR_UP/OD/ROD + * and uses the power register for + */ +#define MCI_STM32_PWR_CYC 0x02 +#define MCI_STM32_VSWITCH BIT(2) +#define MCI_STM32_VSWITCHEN BIT(3) +#define MCI_STM32_DIRPOL BIT(4) #define MMCICLOCK 0x004 #define MCI_CLK_ENABLE (1 << 8) @@ -50,6 +58,19 @@ #define MCI_QCOM_CLK_SELECT_IN_FBCLK BIT(15) #define MCI_QCOM_CLK_SELECT_IN_DDR_MODE (BIT(14) | BIT(15)) +/* Modified on STM32 sdmmc */ +#define MCI_STM32_CLK_CLKDIV_MSK GENMASK(9, 0) +#define MCI_STM32_CLK_WIDEBUS_4 BIT(14) +#define MCI_STM32_CLK_WIDEBUS_8 BIT(15) +#define MCI_STM32_CLK_NEGEDGE BIT(16) +#define MCI_STM32_CLK_HWFCEN BIT(17) +#define MCI_STM32_CLK_DDR BIT(18) +#define MCI_STM32_CLK_BUSSPEED BIT(19) +#define MCI_STM32_CLK_SEL_MSK GENMASK(21, 20) +#define MCI_STM32_CLK_SELCK (0 << 20) +#define MCI_STM32_CLK_SELCKIN (1 << 20) +#define MCI_STM32_CLK_SELFBCK (2 << 20) + #define MMCIARGUMENT 0x008 /* The command register controls the Command Path State Machine (CPSM) */ @@ -72,6 +93,15 @@ #define MCI_CPSM_QCOM_CCSDISABLE BIT(15) #define MCI_CPSM_QCOM_AUTO_CMD19 BIT(16) #define MCI_CPSM_QCOM_AUTO_CMD21 BIT(21) +/* Command register in STM32 sdmmc versions */ +#define MCI_CPSM_STM32_CMDTRANS BIT(6) +#define MCI_CPSM_STM32_CMDSTOP BIT(7) +#define MCI_CPSM_STM32_WAITRESP_MASK GENMASK(9, 8) +#define MCI_CPSM_STM32_NORSP (0 << 8) +#define MCI_CPSM_STM32_SRSP_CRC (1 << 8) +#define MCI_CPSM_STM32_SRSP (2 << 8) +#define MCI_CPSM_STM32_LRSP_CRC (3 << 8) +#define MCI_CPSM_STM32_ENABLE BIT(12) #define MMCIRESPCMD 0x010 #define MMCIRESPONSE0 0x014 @@ -130,6 +160,8 @@ #define MCI_ST_SDIOIT (1 << 22) #define MCI_ST_CEATAEND (1 << 23) #define MCI_ST_CARDBUSY (1 << 24) +/* Extended status bits for the STM32 variants */ +#define MCI_STM32_BUSYD0 BIT(20) #define MMCICLEAR 0x038 #define MCI_CMDCRCFAILCLR (1 << 0) @@ -175,21 +207,45 @@ #define MCI_ST_SDIOITMASK (1 << 22) #define MCI_ST_CEATAENDMASK (1 << 23) #define MCI_ST_BUSYENDMASK (1 << 24) +/* Extended status bits for the STM32 variants */ +#define MCI_STM32_BUSYD0ENDMASK BIT(21) #define MMCIMASK1 0x040 #define MMCIFIFOCNT 0x048 #define MMCIFIFO 0x080 /* to 0x0bc */ +/* STM32 sdmmc registers for IDMA (Internal DMA) */ +#define MMCI_STM32_IDMACTRLR 0x050 +#define MMCI_STM32_IDMAEN BIT(0) +#define MMCI_STM32_IDMALLIEN BIT(1) + +#define MMCI_STM32_IDMABSIZER 0x054 +#define MMCI_STM32_IDMABNDT_SHIFT 5 +#define MMCI_STM32_IDMABNDT_MASK GENMASK(12, 5) + +#define MMCI_STM32_IDMABASE0R 0x058 + +#define MMCI_STM32_IDMALAR 0x64 +#define MMCI_STM32_IDMALA_MASK GENMASK(13, 0) +#define MMCI_STM32_ABR BIT(29) +#define MMCI_STM32_ULS BIT(30) +#define MMCI_STM32_ULA BIT(31) + +#define MMCI_STM32_IDMABAR 0x68 + #define MCI_IRQENABLE \ - (MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK| \ - MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK| \ - MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_STARTBITERRMASK) + (MCI_CMDCRCFAILMASK | MCI_DATACRCFAILMASK | MCI_CMDTIMEOUTMASK | \ + MCI_DATATIMEOUTMASK | MCI_TXUNDERRUNMASK | MCI_RXOVERRUNMASK | \ + MCI_CMDRESPENDMASK | MCI_CMDSENTMASK) /* These interrupts are directed to IRQ1 when two IRQ lines are available */ -#define MCI_IRQ1MASK \ +#define MCI_IRQ_PIO_MASK \ (MCI_RXFIFOHALFFULLMASK | MCI_RXDATAAVLBLMASK | \ MCI_TXFIFOHALFEMPTYMASK) +#define MCI_IRQ_PIO_STM32_MASK \ + (MCI_RXFIFOHALFFULLMASK | MCI_TXFIFOHALFEMPTYMASK) + #define NR_SG 128 #define MMCI_PINCTRL_STATE_OPENDRAIN "opendrain" @@ -204,6 +260,10 @@ struct mmci_host; * @clkreg_enable: enable value for MMCICLOCK register * @clkreg_8bit_bus_enable: enable value for 8 bit bus * @clkreg_neg_edge_enable: enable value for inverted data/cmd output + * @cmdreg_cpsm_enable: enable value for CPSM + * @cmdreg_lrsp_crc: enable value for long response with crc + * @cmdreg_srsp_crc: enable value for short response with crc + * @cmdreg_srsp: enable value for short response without crc * @datalength_bits: number of bits in the MMCIDATALENGTH register * @fifosize: number of bytes that can be written when MMCI_TXFIFOEMPTY * is asserted (likewise for RX) @@ -212,11 +272,17 @@ struct mmci_host; * @data_cmd_enable: enable value for data commands. * @st_sdio: enable ST specific SDIO logic * @st_clkdiv: true if using a ST-specific clock divider algorithm + * @stm32_clkdiv: true if using a STM32-specific clock divider algorithm * @datactrl_mask_ddrmode: ddr mode mask in datactrl register. * @blksz_datactrl16: true if Block size is at b16..b30 position in datactrl register * @blksz_datactrl4: true if Block size is at b4..b16 position in datactrl * register * @datactrl_mask_sdio: SDIO enable mask in datactrl register + * @datactrl_blksz: block size in power of two + * @datactrl_dpsm_enable: enable value for DPSM + * @datactrl_first: true if data must be setup before send command + * @datacnt_useless: true if you could not use datacnt register to read + * remaining data * @pwrreg_powerup: power up value for MMCIPOWER register * @f_max: maximum clk frequency supported by the controller. * @signal_direction: input/out direction of bus signals can be indicated @@ -233,53 +299,75 @@ struct mmci_host; * @qcom_dml: enables qcom specific dma glue for dma transfers. * @reversed_irq_handling: handle data irq before cmd irq. * @mmcimask1: true if variant have a MMCIMASK1 register. + * @irq_pio_mask: bitmask used to manage interrupt pio transfert in mmcimask + * register * @start_err: bitmask identifying the STARTBITERR bit inside MMCISTATUS * register. * @opendrain: bitmask identifying the OPENDRAIN bit inside MMCIPOWER register + * @dma_lli: true if variant has dma link list feature. + * @stm32_idmabsize_mask: stm32 sdmmc idma buffer size. */ struct variant_data { unsigned int clkreg; unsigned int clkreg_enable; unsigned int clkreg_8bit_bus_enable; unsigned int clkreg_neg_edge_enable; + unsigned int cmdreg_cpsm_enable; + unsigned int cmdreg_lrsp_crc; + unsigned int cmdreg_srsp_crc; + unsigned int cmdreg_srsp; unsigned int datalength_bits; unsigned int fifosize; unsigned int fifohalfsize; unsigned int data_cmd_enable; unsigned int datactrl_mask_ddrmode; unsigned int datactrl_mask_sdio; - bool st_sdio; - bool st_clkdiv; - bool blksz_datactrl16; - bool blksz_datactrl4; + unsigned int datactrl_blocksz; + unsigned int datactrl_dpsm_enable; + u8 datactrl_first:1; + u8 datacnt_useless:1; + u8 st_sdio:1; + u8 st_clkdiv:1; + u8 stm32_clkdiv:1; + u8 blksz_datactrl16:1; + u8 blksz_datactrl4:1; u32 pwrreg_powerup; u32 f_max; - bool signal_direction; - bool pwrreg_clkgate; - bool busy_detect; + u8 signal_direction:1; + u8 pwrreg_clkgate:1; + u8 busy_detect:1; u32 busy_dpsm_flag; u32 busy_detect_flag; u32 busy_detect_mask; - bool pwrreg_nopower; - bool explicit_mclk_control; - bool qcom_fifo; - bool qcom_dml; - bool reversed_irq_handling; - bool mmcimask1; + u8 pwrreg_nopower:1; + u8 explicit_mclk_control:1; + u8 qcom_fifo:1; + u8 qcom_dml:1; + u8 reversed_irq_handling:1; + u8 mmcimask1:1; + unsigned int irq_pio_mask; u32 start_err; u32 opendrain; + u8 dma_lli:1; + u32 stm32_idmabsize_mask; void (*init)(struct mmci_host *host); }; /* mmci variant callbacks */ struct mmci_host_ops { - void (*dma_setup)(struct mmci_host *host); -}; - -struct mmci_host_next { - struct dma_async_tx_descriptor *dma_desc; - struct dma_chan *dma_chan; - s32 cookie; + int (*validate_data)(struct mmci_host *host, struct mmc_data *data); + int (*prep_data)(struct mmci_host *host, struct mmc_data *data, + bool next); + void (*unprep_data)(struct mmci_host *host, struct mmc_data *data, + int err); + void (*get_next_data)(struct mmci_host *host, struct mmc_data *data); + int (*dma_setup)(struct mmci_host *host); + void (*dma_release)(struct mmci_host *host); + int (*dma_start)(struct mmci_host *host, unsigned int *datactrl); + void (*dma_finalize)(struct mmci_host *host, struct mmc_data *data); + void (*dma_error)(struct mmci_host *host); + void (*set_clkreg)(struct mmci_host *host, unsigned int desired); + void (*set_pwrreg)(struct mmci_host *host, unsigned int pwr); }; struct mmci_host { @@ -290,7 +378,9 @@ struct mmci_host { struct mmc_data *data; struct mmc_host *mmc; struct clk *clk; - bool singleirq; + u8 singleirq:1; + + struct reset_control *rst; spinlock_t lock; @@ -301,10 +391,11 @@ struct mmci_host { u32 pwr_reg; u32 pwr_reg_add; u32 clk_reg; + u32 clk_reg_add; u32 datactrl_reg; u32 busy_status; u32 mask1_reg; - bool vqmmc_enabled; + u8 vqmmc_enabled:1; struct mmci_platform_data *plat; struct mmci_host_ops *ops; struct variant_data *variant; @@ -323,18 +414,25 @@ struct mmci_host { unsigned int size; int (*get_rx_fifocnt)(struct mmci_host *h, u32 status, int remain); -#ifdef CONFIG_DMA_ENGINE - /* DMA stuff */ - struct dma_chan *dma_current; - struct dma_chan *dma_rx_channel; - struct dma_chan *dma_tx_channel; - struct dma_async_tx_descriptor *dma_desc_current; - struct mmci_host_next next_data; - bool dma_in_progress; + u8 use_dma:1; + u8 dma_in_progress:1; + void *dma_priv; -#define dma_inprogress(host) ((host)->dma_in_progress) -#else -#define dma_inprogress(host) (0) -#endif + s32 next_cookie; }; +#define dma_inprogress(host) ((host)->dma_in_progress) + +void mmci_write_clkreg(struct mmci_host *host, u32 clk); +void mmci_write_pwrreg(struct mmci_host *host, u32 pwr); + +int mmci_dmae_prep_data(struct mmci_host *host, struct mmc_data *data, + bool next); +void mmci_dmae_unprep_data(struct mmci_host *host, struct mmc_data *data, + int err); +void mmci_dmae_get_next_data(struct mmci_host *host, struct mmc_data *data); +int mmci_dmae_setup(struct mmci_host *host); +void mmci_dmae_release(struct mmci_host *host); +int mmci_dmae_start(struct mmci_host *host, unsigned int *datactrl); +void mmci_dmae_finalize(struct mmci_host *host, struct mmc_data *data); +void mmci_dmae_error(struct mmci_host *host); |