diff options
Diffstat (limited to 'drivers/mfd')
| -rw-r--r-- | drivers/mfd/Kconfig | 34 | ||||
| -rw-r--r-- | drivers/mfd/Makefile | 4 | ||||
| -rw-r--r-- | drivers/mfd/axp20x-i2c.c | 104 | ||||
| -rw-r--r-- | drivers/mfd/axp20x-rsb.c | 80 | ||||
| -rw-r--r-- | drivers/mfd/axp20x.c | 105 | ||||
| -rw-r--r-- | drivers/mfd/fsl-imx25-tsadc.c | 203 | ||||
| -rw-r--r-- | drivers/mfd/intel_quark_i2c_gpio.c | 26 |
7 files changed, 454 insertions, 102 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 1bc97c2761e4..19a5caec7a02 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -91,14 +91,29 @@ config MFD_BCM590XX Support for the BCM590xx PMUs from Broadcom config MFD_AXP20X - bool "X-Powers AXP20X" + tristate select MFD_CORE - select REGMAP_I2C select REGMAP_IRQ - depends on I2C=y + +config MFD_AXP20X_I2C + tristate "X-Powers AXP series PMICs with I2C" + select MFD_AXP20X + select REGMAP_I2C + depends on I2C + help + If you say Y here you get support for the X-Powers AXP series power + management ICs (PMICs) controlled with I2C. + This driver include only the core APIs. You have to select individual + components like regulators or the PEK (Power Enable Key) under the + corresponding menus. + +config MFD_AXP20X_RSB + tristate "X-Powers AXP series PMICs with RSB" + select MFD_AXP20X + depends on SUNXI_RSB help - If you say Y here you get support for the X-Powers AXP202, AXP209 and - AXP288 power management IC (PMIC). + If you say Y here you get support for the X-Powers AXP series power + management ICs (PMICs) controlled with RSB. This driver include only the core APIs. You have to select individual components like regulators or the PEK (Power Enable Key) under the corresponding menus. @@ -271,6 +286,15 @@ config MFD_MC13XXX_I2C help Select this if your MC13xxx is connected via an I2C bus. +config MFD_MX25_TSADC + tristate "Freescale i.MX25 integrated Touchscreen and ADC unit" + select REGMAP_MMIO + depends on (SOC_IMX25 && OF) || COMPILE_TEST + help + Enable support for the integrated Touchscreen and ADC unit of the + i.MX25 processors. They consist of a conversion queue for general + purpose ADC and a queue for Touchscreens. + config MFD_HI6421_PMIC tristate "HiSilicon Hi6421 PMU/Codec IC" depends on OF diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 1811202cee19..b7a3cd9adaee 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -84,6 +84,8 @@ obj-$(CONFIG_TWL4030_POWER) += twl4030-power.o obj-$(CONFIG_MFD_TWL4030_AUDIO) += twl4030-audio.o obj-$(CONFIG_TWL6040_CORE) += twl6040.o +obj-$(CONFIG_MFD_MX25_TSADC) += fsl-imx25-tsadc.o + obj-$(CONFIG_MFD_MC13XXX) += mc13xxx-core.o obj-$(CONFIG_MFD_MC13XXX_SPI) += mc13xxx-spi.o obj-$(CONFIG_MFD_MC13XXX_I2C) += mc13xxx-i2c.o @@ -110,6 +112,8 @@ obj-$(CONFIG_PMIC_DA9052) += da9052-core.o obj-$(CONFIG_MFD_DA9052_SPI) += da9052-spi.o obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o obj-$(CONFIG_MFD_AXP20X) += axp20x.o +obj-$(CONFIG_MFD_AXP20X_I2C) += axp20x-i2c.o +obj-$(CONFIG_MFD_AXP20X_RSB) += axp20x-rsb.o obj-$(CONFIG_MFD_LP3943) += lp3943.o obj-$(CONFIG_MFD_LP8788) += lp8788.o lp8788-irq.o diff --git a/drivers/mfd/axp20x-i2c.c b/drivers/mfd/axp20x-i2c.c new file mode 100644 index 000000000000..b1b865822c07 --- /dev/null +++ b/drivers/mfd/axp20x-i2c.c @@ -0,0 +1,104 @@ +/* + * I2C driver for the X-Powers' Power Management ICs + * + * AXP20x typically comprises an adaptive USB-Compatible PWM charger, BUCK DC-DC + * converters, LDOs, multiple 12-bit ADCs of voltage, current and temperature + * as well as configurable GPIOs. + * + * This driver supports the I2C variants. + * + * Copyright (C) 2014 Carlo Caione + * + * Author: Carlo Caione <carlo@caione.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/acpi.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/mfd/axp20x.h> +#include <linux/of.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +static int axp20x_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct axp20x_dev *axp20x; + int ret; + + axp20x = devm_kzalloc(&i2c->dev, sizeof(*axp20x), GFP_KERNEL); + if (!axp20x) + return -ENOMEM; + + axp20x->dev = &i2c->dev; + axp20x->irq = i2c->irq; + dev_set_drvdata(axp20x->dev, axp20x); + + ret = axp20x_match_device(axp20x); + if (ret) + return ret; + + axp20x->regmap = devm_regmap_init_i2c(i2c, axp20x->regmap_cfg); + if (IS_ERR(axp20x->regmap)) { + ret = PTR_ERR(axp20x->regmap); + dev_err(&i2c->dev, "regmap init failed: %d\n", ret); + return ret; + } + + return axp20x_device_probe(axp20x); +} + +static int axp20x_i2c_remove(struct i2c_client *i2c) +{ + struct axp20x_dev *axp20x = i2c_get_clientdata(i2c); + + return axp20x_device_remove(axp20x); +} + +static const struct of_device_id axp20x_i2c_of_match[] = { + { .compatible = "x-powers,axp152", .data = (void *)AXP152_ID }, + { .compatible = "x-powers,axp202", .data = (void *)AXP202_ID }, + { .compatible = "x-powers,axp209", .data = (void *)AXP209_ID }, + { .compatible = "x-powers,axp221", .data = (void *)AXP221_ID }, + { }, +}; +MODULE_DEVICE_TABLE(of, axp20x_i2c_of_match); + +/* + * This is useless for OF-enabled devices, but it is needed by I2C subsystem + */ +static const struct i2c_device_id axp20x_i2c_id[] = { + { }, +}; +MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id); + +static const struct acpi_device_id axp20x_i2c_acpi_match[] = { + { + .id = "INT33F4", + .driver_data = AXP288_ID, + }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, axp20x_i2c_acpi_match); + +static struct i2c_driver axp20x_i2c_driver = { + .driver = { + .name = "axp20x-i2c", + .of_match_table = of_match_ptr(axp20x_i2c_of_match), + .acpi_match_table = ACPI_PTR(axp20x_i2c_acpi_match), + }, + .probe = axp20x_i2c_probe, + .remove = axp20x_i2c_remove, + .id_table = axp20x_i2c_id, +}; + +module_i2c_driver(axp20x_i2c_driver); + +MODULE_DESCRIPTION("PMIC MFD I2C driver for AXP20X"); +MODULE_AUTHOR("Carlo Caione <carlo@caione.org>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/axp20x-rsb.c b/drivers/mfd/axp20x-rsb.c new file mode 100644 index 000000000000..28c20247c112 --- /dev/null +++ b/drivers/mfd/axp20x-rsb.c @@ -0,0 +1,80 @@ +/* + * RSB driver for the X-Powers' Power Management ICs + * + * AXP20x typically comprises an adaptive USB-Compatible PWM charger, BUCK DC-DC + * converters, LDOs, multiple 12-bit ADCs of voltage, current and temperature + * as well as configurable GPIOs. + * + * This driver supports the RSB variants. + * + * Copyright (C) 2015 Chen-Yu Tsai + * + * Author: Chen-Yu Tsai <wens@csie.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/acpi.h> +#include <linux/err.h> +#include <linux/mfd/axp20x.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/sunxi-rsb.h> + +static int axp20x_rsb_probe(struct sunxi_rsb_device *rdev) +{ + struct axp20x_dev *axp20x; + int ret; + + axp20x = devm_kzalloc(&rdev->dev, sizeof(*axp20x), GFP_KERNEL); + if (!axp20x) + return -ENOMEM; + + axp20x->dev = &rdev->dev; + axp20x->irq = rdev->irq; + dev_set_drvdata(&rdev->dev, axp20x); + + ret = axp20x_match_device(axp20x); + if (ret) + return ret; + + axp20x->regmap = devm_regmap_init_sunxi_rsb(rdev, axp20x->regmap_cfg); + if (IS_ERR(axp20x->regmap)) { + ret = PTR_ERR(axp20x->regmap); + dev_err(&rdev->dev, "regmap init failed: %d\n", ret); + return ret; + } + + return axp20x_device_probe(axp20x); +} + +static int axp20x_rsb_remove(struct sunxi_rsb_device *rdev) +{ + struct axp20x_dev *axp20x = sunxi_rsb_device_get_drvdata(rdev); + + return axp20x_device_remove(axp20x); +} + +static const struct of_device_id axp20x_rsb_of_match[] = { + { .compatible = "x-powers,axp223", .data = (void *)AXP223_ID }, + { }, +}; +MODULE_DEVICE_TABLE(of, axp20x_rsb_of_match); + +static struct sunxi_rsb_driver axp20x_rsb_driver = { + .driver = { + .name = "axp20x-rsb", + .of_match_table = of_match_ptr(axp20x_rsb_of_match), + }, + .probe = axp20x_rsb_probe, + .remove = axp20x_rsb_remove, +}; +module_sunxi_rsb_driver(axp20x_rsb_driver); + +MODULE_DESCRIPTION("PMIC MFD sunXi RSB driver for AXP20X"); +MODULE_AUTHOR("Chen-Yu Tsai <wens@csie.org>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c index 9842199e2e6c..a57d6e940610 100644 --- a/drivers/mfd/axp20x.c +++ b/drivers/mfd/axp20x.c @@ -1,10 +1,14 @@ /* - * axp20x.c - MFD core driver for the X-Powers' Power Management ICs + * MFD core driver for the X-Powers' Power Management ICs * * AXP20x typically comprises an adaptive USB-Compatible PWM charger, BUCK DC-DC * converters, LDOs, multiple 12-bit ADCs of voltage, current and temperature * as well as configurable GPIOs. * + * This file contains the interface independent core functions. + * + * Copyright (C) 2014 Carlo Caione + * * Author: Carlo Caione <carlo@caione.org> * * This program is free software; you can redistribute it and/or modify @@ -13,18 +17,15 @@ */ #include <linux/err.h> -#include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/pm_runtime.h> #include <linux/regmap.h> -#include <linux/slab.h> #include <linux/regulator/consumer.h> #include <linux/mfd/axp20x.h> #include <linux/mfd/core.h> #include <linux/of_device.h> -#include <linux/of_irq.h> #include <linux/acpi.h> #define AXP20X_OFF 0x80 @@ -34,6 +35,7 @@ static const char * const axp20x_model_names[] = { "AXP202", "AXP209", "AXP221", + "AXP223", "AXP288", }; @@ -376,32 +378,6 @@ static const struct regmap_irq axp288_regmap_irqs[] = { INIT_REGMAP_IRQ(AXP288, BC_USB_CHNG, 5, 1), }; -static const struct of_device_id axp20x_of_match[] = { - { .compatible = "x-powers,axp152", .data = (void *) AXP152_ID }, - { .compatible = "x-powers,axp202", .data = (void *) AXP202_ID }, - { .compatible = "x-powers,axp209", .data = (void *) AXP209_ID }, - { .compatible = "x-powers,axp221", .data = (void *) AXP221_ID }, - { }, -}; -MODULE_DEVICE_TABLE(of, axp20x_of_match); - -/* - * This is useless for OF-enabled devices, but it is needed by I2C subsystem - */ -static const struct i2c_device_id axp20x_i2c_id[] = { - { }, -}; -MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id); - -static const struct acpi_device_id axp20x_acpi_match[] = { - { - .id = "INT33F4", - .driver_data = AXP288_ID, - }, - { }, -}; -MODULE_DEVICE_TABLE(acpi, axp20x_acpi_match); - static const struct regmap_irq_chip axp152_regmap_irq_chip = { .name = "axp152_irq_chip", .status_base = AXP152_IRQ1_STATE, @@ -606,25 +582,26 @@ static void axp20x_power_off(void) AXP20X_OFF); } -static int axp20x_match_device(struct axp20x_dev *axp20x, struct device *dev) +int axp20x_match_device(struct axp20x_dev *axp20x) { + struct device *dev = axp20x->dev; const struct acpi_device_id *acpi_id; const struct of_device_id *of_id; if (dev->of_node) { - of_id = of_match_device(axp20x_of_match, dev); + of_id = of_match_device(dev->driver->of_match_table, dev); if (!of_id) { dev_err(dev, "Unable to match OF ID\n"); return -ENODEV; } - axp20x->variant = (long) of_id->data; + axp20x->variant = (long)of_id->data; } else { acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev); if (!acpi_id || !acpi_id->driver_data) { dev_err(dev, "Unable to match ACPI ID and data\n"); return -ENODEV; } - axp20x->variant = (long) acpi_id->driver_data; + axp20x->variant = (long)acpi_id->driver_data; } switch (axp20x->variant) { @@ -642,6 +619,7 @@ static int axp20x_match_device(struct axp20x_dev *axp20x, struct device *dev) axp20x->regmap_irq_chip = &axp20x_regmap_irq_chip; break; case AXP221_ID: + case AXP223_ID: axp20x->nr_cells = ARRAY_SIZE(axp22x_cells); axp20x->cells = axp22x_cells; axp20x->regmap_cfg = &axp22x_regmap_config; @@ -658,51 +636,31 @@ static int axp20x_match_device(struct axp20x_dev *axp20x, struct device *dev) return -EINVAL; } dev_info(dev, "AXP20x variant %s found\n", - axp20x_model_names[axp20x->variant]); + axp20x_model_names[axp20x->variant]); return 0; } +EXPORT_SYMBOL(axp20x_match_device); -static int axp20x_i2c_probe(struct i2c_client *i2c, - const struct i2c_device_id *id) +int axp20x_device_probe(struct axp20x_dev *axp20x) { - struct axp20x_dev *axp20x; int ret; - axp20x = devm_kzalloc(&i2c->dev, sizeof(*axp20x), GFP_KERNEL); - if (!axp20x) - return -ENOMEM; - - ret = axp20x_match_device(axp20x, &i2c->dev); - if (ret) - return ret; - - axp20x->i2c_client = i2c; - axp20x->dev = &i2c->dev; - dev_set_drvdata(axp20x->dev, axp20x); - - axp20x->regmap = devm_regmap_init_i2c(i2c, axp20x->regmap_cfg); - if (IS_ERR(axp20x->regmap)) { - ret = PTR_ERR(axp20x->regmap); - dev_err(&i2c->dev, "regmap init failed: %d\n", ret); - return ret; - } - - ret = regmap_add_irq_chip(axp20x->regmap, i2c->irq, + ret = regmap_add_irq_chip(axp20x->regmap, axp20x->irq, IRQF_ONESHOT | IRQF_SHARED, -1, axp20x->regmap_irq_chip, &axp20x->regmap_irqc); if (ret) { - dev_err(&i2c->dev, "failed to add irq chip: %d\n", ret); + dev_err(axp20x->dev, "failed to add irq chip: %d\n", ret); return ret; } ret = mfd_add_devices(axp20x->dev, -1, axp20x->cells, - axp20x->nr_cells, NULL, 0, NULL); + axp20x->nr_cells, NULL, 0, NULL); if (ret) { - dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret); - regmap_del_irq_chip(i2c->irq, axp20x->regmap_irqc); + dev_err(axp20x->dev, "failed to add MFD devices: %d\n", ret); + regmap_del_irq_chip(axp20x->irq, axp20x->regmap_irqc); return ret; } @@ -711,38 +669,25 @@ static int axp20x_i2c_probe(struct i2c_client *i2c, pm_power_off = axp20x_power_off; } - dev_info(&i2c->dev, "AXP20X driver loaded\n"); + dev_info(axp20x->dev, "AXP20X driver loaded\n"); return 0; } +EXPORT_SYMBOL(axp20x_device_probe); -static int axp20x_i2c_remove(struct i2c_client *i2c) +int axp20x_device_remove(struct axp20x_dev *axp20x) { - struct axp20x_dev *axp20x = i2c_get_clientdata(i2c); - if (axp20x == axp20x_pm_power_off) { axp20x_pm_power_off = NULL; pm_power_off = NULL; } mfd_remove_devices(axp20x->dev); - regmap_del_irq_chip(axp20x->i2c_client->irq, axp20x->regmap_irqc); + regmap_del_irq_chip(axp20x->irq, axp20x->regmap_irqc); return 0; } - -static struct i2c_driver axp20x_i2c_driver = { - .driver = { - .name = "axp20x", - .of_match_table = of_match_ptr(axp20x_of_match), - .acpi_match_table = ACPI_PTR(axp20x_acpi_match), - }, - .probe = axp20x_i2c_probe, - .remove = axp20x_i2c_remove, - .id_table = axp20x_i2c_id, -}; - -module_i2c_driver(axp20x_i2c_driver); +EXPORT_SYMBOL(axp20x_device_remove); MODULE_DESCRIPTION("PMIC MFD core driver for AXP20X"); MODULE_AUTHOR("Carlo Caione <carlo@caione.org>"); diff --git a/drivers/mfd/fsl-imx25-tsadc.c b/drivers/mfd/fsl-imx25-tsadc.c new file mode 100644 index 000000000000..77b2675cf8f5 --- /dev/null +++ b/drivers/mfd/fsl-imx25-tsadc.c @@ -0,0 +1,203 @@ +/* + * Copyright (C) 2014-2015 Pengutronix, Markus Pargmann <mpa@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/interrupt.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/irqdesc.h> +#include <linux/irqdomain.h> +#include <linux/irq.h> +#include <linux/mfd/imx25-tsadc.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +static struct regmap_config mx25_tsadc_regmap_config = { + .fast_io = true, + .max_register = 8, + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static void mx25_tsadc_irq_handler(struct irq_desc *desc) +{ + struct mx25_tsadc *tsadc = irq_desc_get_handler_data(desc); + struct irq_chip *chip = irq_desc_get_chip(desc); + u32 status; + + chained_irq_enter(chip, desc); + + regmap_read(tsadc->regs, MX25_TSC_TGSR, &status); + + if (status & MX25_TGSR_GCQ_INT) + generic_handle_irq(irq_find_mapping(tsadc->domain, 1)); + + if (status & MX25_TGSR_TCQ_INT) + generic_handle_irq(irq_find_mapping(tsadc->domain, 0)); + + chained_irq_exit(chip, desc); +} + +static int mx25_tsadc_domain_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hwirq) +{ + struct mx25_tsadc *tsadc = d->host_data; + + irq_set_chip_data(irq, tsadc); + irq_set_chip_and_handler(irq, &dummy_irq_chip, + handle_level_irq); + irq_modify_status(irq, IRQ_NOREQUEST, IRQ_NOPROBE); + + return 0; +} + +static struct irq_domain_ops mx25_tsadc_domain_ops = { + .map = mx25_tsadc_domain_map, + .xlate = irq_domain_xlate_onecell, +}; + +static int mx25_tsadc_setup_irq(struct platform_device *pdev, + struct mx25_tsadc *tsadc) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + int irq; + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + dev_err(dev, "Failed to get irq\n"); + return irq; + } + + tsadc->domain = irq_domain_add_simple(np, 2, 0, &mx25_tsadc_domain_ops, + tsadc); + if (!tsadc->domain) { + dev_err(dev, "Failed to add irq domain\n"); + return -ENOMEM; + } + + irq_set_chained_handler(irq, mx25_tsadc_irq_handler); + irq_set_handler_data(irq, tsadc); + + return 0; +} + +static void mx25_tsadc_setup_clk(struct platform_device *pdev, + struct mx25_tsadc *tsadc) +{ + unsigned clk_div; + + /* + * According to the datasheet the ADC clock should never + * exceed 1,75 MHz. Base clock is the IPG and the ADC unit uses + * a funny clock divider. To keep the ADC conversion time constant + * adapt the ADC internal clock divider to the IPG clock rate. + */ + + dev_dbg(&pdev->dev, "Found master clock at %lu Hz\n", + clk_get_rate(tsadc->clk)); + + clk_div = DIV_ROUND_UP(clk_get_rate(tsadc->clk), 1750000); + dev_dbg(&pdev->dev, "Setting up ADC clock divider to %u\n", clk_div); + + /* adc clock = IPG clock / (2 * div + 2) */ + clk_div -= 2; + clk_div /= 2; + + /* + * the ADC clock divider changes its behaviour when values below 4 + * are used: it is fixed to "/ 10" in this case + */ + clk_div = max_t(unsigned, 4, clk_div); + + dev_dbg(&pdev->dev, "Resulting ADC conversion clock at %lu Hz\n", + clk_get_rate(tsadc->clk) / (2 * clk_div + 2)); + + regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, + MX25_TGCR_ADCCLKCFG(0x1f), + MX25_TGCR_ADCCLKCFG(clk_div)); +} + +static int mx25_tsadc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct mx25_tsadc *tsadc; + struct resource *res; + int ret; + void __iomem *iomem; + + tsadc = devm_kzalloc(dev, sizeof(*tsadc), GFP_KERNEL); + if (!tsadc) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + iomem = devm_ioremap_resource(dev, res); + if (IS_ERR(iomem)) + return PTR_ERR(iomem); + + tsadc->regs = devm_regmap_init_mmio(dev, iomem, + &mx25_tsadc_regmap_config); + if (IS_ERR(tsadc->regs)) { + dev_err(dev, "Failed to initialize regmap\n"); + return PTR_ERR(tsadc->regs); + } + + tsadc->clk = devm_clk_get(dev, "ipg"); + if (IS_ERR(tsadc->clk)) { + dev_err(dev, "Failed to get ipg clock\n"); + return PTR_ERR(tsadc->clk); + } + + /* setup clock according to the datasheet */ + mx25_tsadc_setup_clk(pdev, tsadc); + + /* Enable clock and reset the component */ + regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_CLK_EN, + MX25_TGCR_CLK_EN); + regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_TSC_RST, + MX25_TGCR_TSC_RST); + + /* Setup powersaving mode, but enable internal reference voltage */ + regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_POWERMODE_MASK, + MX25_TGCR_POWERMODE_SAVE); + regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_INTREFEN, + MX25_TGCR_INTREFEN); + + ret = mx25_tsadc_setup_irq(pdev, tsadc); + if (ret) + return ret; + + platform_set_drvdata(pdev, tsadc); + + of_platform_populate(np, NULL, NULL, dev); + + return 0; +} + +static const struct of_device_id mx25_tsadc_ids[] = { + { .compatible = "fsl,imx25-tsadc" }, + { /* Sentinel */ } +}; + +static struct platform_driver mx25_tsadc_driver = { + .driver = { + .name = "mx25-tsadc", + .of_match_table = of_match_ptr(mx25_tsadc_ids), + }, + .probe = mx25_tsadc_probe, +}; +module_platform_driver(mx25_tsadc_driver); + +MODULE_DESCRIPTION("MFD for ADC/TSC for Freescale mx25"); +MODULE_AUTHOR("Markus Pargmann <mpa@pengutronix.de>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:mx25-tsadc"); diff --git a/drivers/mfd/intel_quark_i2c_gpio.c b/drivers/mfd/intel_quark_i2c_gpio.c index 042137465300..bdc5e27222c0 100644 --- a/drivers/mfd/intel_quark_i2c_gpio.c +++ b/drivers/mfd/intel_quark_i2c_gpio.c @@ -52,8 +52,6 @@ /* The Quark I2C controller source clock */ #define INTEL_QUARK_I2C_CLK_HZ 33000000 -#define INTEL_QUARK_I2C_NCLK 1 - struct intel_quark_mfd { struct pci_dev *pdev; struct clk *i2c_clk; @@ -128,30 +126,24 @@ MODULE_DEVICE_TABLE(pci, intel_quark_mfd_ids); static int intel_quark_register_i2c_clk(struct intel_quark_mfd *quark_mfd) { struct pci_dev *pdev = quark_mfd->pdev; - struct clk_lookup *i2c_clk_lookup; struct clk *i2c_clk; - int ret; - - i2c_clk_lookup = devm_kcalloc(&pdev->dev, INTEL_QUARK_I2C_NCLK, - sizeof(*i2c_clk_lookup), GFP_KERNEL); - if (!i2c_clk_lookup) - return -ENOMEM; - - i2c_clk_lookup[0].dev_id = INTEL_QUARK_I2C_CONTROLLER_CLK; i2c_clk = clk_register_fixed_rate(&pdev->dev, INTEL_QUARK_I2C_CONTROLLER_CLK, NULL, CLK_IS_ROOT, INTEL_QUARK_I2C_CLK_HZ); + if (IS_ERR(i2c_clk)) + return PTR_ERR(i2c_clk); - quark_mfd->i2c_clk_lookup = i2c_clk_lookup; quark_mfd->i2c_clk = i2c_clk; + quark_mfd->i2c_clk_lookup = clkdev_create(i2c_clk, NULL, + INTEL_QUARK_I2C_CONTROLLER_CLK); - ret = clk_register_clkdevs(i2c_clk, i2c_clk_lookup, - INTEL_QUARK_I2C_NCLK); - if (ret) - dev_err(&pdev->dev, "Fixed clk register failed: %d\n", ret); + if (!quark_mfd->i2c_clk_lookup) { + dev_err(&pdev->dev, "Fixed clk register failed\n"); + return -ENOMEM; + } - return ret; + return 0; } static void intel_quark_unregister_i2c_clk(struct pci_dev *pdev) |