diff options
Diffstat (limited to 'drivers/mfd/wm8994-core.c')
| -rw-r--r-- | drivers/mfd/wm8994-core.c | 53 |
1 files changed, 53 insertions, 0 deletions
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c index b03be1d4e0ca..5d6ba132837e 100644 --- a/drivers/mfd/wm8994-core.c +++ b/drivers/mfd/wm8994-core.c @@ -217,6 +217,47 @@ static int wm8994_suspend(struct device *dev) return 0; } + ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_4); + if (ret < 0) { + dev_err(dev, "Failed to read power status: %d\n", ret); + } else if (ret & (WM8994_AIF2ADCL_ENA | WM8994_AIF2ADCR_ENA | + WM8994_AIF1ADC2L_ENA | WM8994_AIF1ADC2R_ENA | + WM8994_AIF1ADC1L_ENA | WM8994_AIF1ADC1R_ENA)) { + dev_dbg(dev, "CODEC still active, ignoring suspend\n"); + return 0; + } + + ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_5); + if (ret < 0) { + dev_err(dev, "Failed to read power status: %d\n", ret); + } else if (ret & (WM8994_AIF2DACL_ENA | WM8994_AIF2DACR_ENA | + WM8994_AIF1DAC2L_ENA | WM8994_AIF1DAC2R_ENA | + WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA)) { + dev_dbg(dev, "CODEC still active, ignoring suspend\n"); + return 0; + } + + switch (wm8994->type) { + case WM8958: + ret = wm8994_reg_read(wm8994, WM8958_MIC_DETECT_1); + if (ret < 0) { + dev_err(dev, "Failed to read power status: %d\n", ret); + } else if (ret & WM8958_MICD_ENA) { + dev_dbg(dev, "CODEC still active, ignoring suspend\n"); + return 0; + } + break; + default: + break; + } + + /* Disable LDO pulldowns while the device is suspended if we + * don't know that something will be driving them. */ + if (!wm8994->ldo_ena_always_driven) + wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2, + WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD, + WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD); + /* GPIO configuration state is saved here since we may be configuring * the GPIO alternate functions even if we're not using the gpiolib * driver for them. @@ -286,6 +327,11 @@ static int wm8994_resume(struct device *dev) if (ret < 0) dev_err(dev, "Failed to restore GPIO registers: %d\n", ret); + /* Disable LDO pulldowns while the device is active */ + wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2, + WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD, + 0); + wm8994->suspended = false; return 0; @@ -467,8 +513,15 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq) pdata->gpio_defaults[i]); } } + + wm8994->ldo_ena_always_driven = pdata->ldo_ena_always_driven; } + /* Disable LDO pulldowns while the device is active */ + wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2, + WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD, + 0); + /* In some system designs where the regulators are not in use, * we can achieve a small reduction in leakage currents by * floating LDO outputs. This bit makes no difference if the |