diff options
Diffstat (limited to 'drivers/memory/samsung/exynos5422-dmc.c')
| -rw-r--r-- | drivers/memory/samsung/exynos5422-dmc.c | 29 |
1 files changed, 20 insertions, 9 deletions
diff --git a/drivers/memory/samsung/exynos5422-dmc.c b/drivers/memory/samsung/exynos5422-dmc.c index 25196d6268e2..b9c7956e5031 100644 --- a/drivers/memory/samsung/exynos5422-dmc.c +++ b/drivers/memory/samsung/exynos5422-dmc.c @@ -12,6 +12,7 @@ #include <linux/io.h> #include <linux/mfd/syscon.h> #include <linux/module.h> +#include <linux/moduleparam.h> #include <linux/of_device.h> #include <linux/pm_opp.h> #include <linux/platform_device.h> @@ -21,6 +22,10 @@ #include "../jedec_ddr.h" #include "../of_memory.h" +static int irqmode; +module_param(irqmode, int, 0644); +MODULE_PARM_DESC(irqmode, "Enable IRQ mode (0=off [default], 1=on)"); + #define EXYNOS5_DREXI_TIMINGAREF (0x0030) #define EXYNOS5_DREXI_TIMINGROW0 (0x0034) #define EXYNOS5_DREXI_TIMINGDATA0 (0x0038) @@ -270,12 +275,14 @@ static int find_target_freq_idx(struct exynos5_dmc *dmc, * This function switches between these banks according to the * currently used clock source. */ -static void exynos5_switch_timing_regs(struct exynos5_dmc *dmc, bool set) +static int exynos5_switch_timing_regs(struct exynos5_dmc *dmc, bool set) { unsigned int reg; int ret; ret = regmap_read(dmc->clk_regmap, CDREX_LPDDR3PHY_CON3, ®); + if (ret) + return ret; if (set) reg |= EXYNOS5_TIMING_SET_SWI; @@ -283,6 +290,8 @@ static void exynos5_switch_timing_regs(struct exynos5_dmc *dmc, bool set) reg &= ~EXYNOS5_TIMING_SET_SWI; regmap_write(dmc->clk_regmap, CDREX_LPDDR3PHY_CON3, reg); + + return 0; } /** @@ -516,7 +525,7 @@ exynos5_dmc_switch_to_bypass_configuration(struct exynos5_dmc *dmc, /* * Delays are long enough, so use them for the new coming clock. */ - exynos5_switch_timing_regs(dmc, USE_MX_MSPLL_TIMINGS); + ret = exynos5_switch_timing_regs(dmc, USE_MX_MSPLL_TIMINGS); return ret; } @@ -577,7 +586,9 @@ exynos5_dmc_change_freq_and_volt(struct exynos5_dmc *dmc, clk_set_rate(dmc->fout_bpll, target_rate); - exynos5_switch_timing_regs(dmc, USE_BPLL_TIMINGS); + ret = exynos5_switch_timing_regs(dmc, USE_BPLL_TIMINGS); + if (ret) + goto disable_clocks; ret = clk_set_parent(dmc->mout_mclk_cdrex, dmc->mout_bpll); if (ret) @@ -945,6 +956,7 @@ static int exynos5_dmc_get_cur_freq(struct device *dev, unsigned long *freq) * It provides to the devfreq framework needed functions and polling period. */ static struct devfreq_dev_profile exynos5_dmc_df_profile = { + .timer = DEVFREQ_TIMER_DELAYED, .target = exynos5_dmc_target, .get_dev_status = exynos5_dmc_get_status, .get_cur_freq = exynos5_dmc_get_cur_freq, @@ -1392,7 +1404,7 @@ static int exynos5_dmc_probe(struct platform_device *pdev) return PTR_ERR(dmc->base_drexi1); dmc->clk_regmap = syscon_regmap_lookup_by_phandle(np, - "samsung,syscon-clk"); + "samsung,syscon-clk"); if (IS_ERR(dmc->clk_regmap)) return PTR_ERR(dmc->clk_regmap); @@ -1427,7 +1439,7 @@ static int exynos5_dmc_probe(struct platform_device *pdev) /* There is two modes in which the driver works: polling or IRQ */ irq[0] = platform_get_irq_byname(pdev, "drex_0"); irq[1] = platform_get_irq_byname(pdev, "drex_1"); - if (irq[0] > 0 && irq[1] > 0) { + if (irq[0] > 0 && irq[1] > 0 && irqmode) { ret = devm_request_threaded_irq(dev, irq[0], NULL, dmc_irq_thread, IRQF_ONESHOT, dev_name(dev), dmc); @@ -1465,13 +1477,12 @@ static int exynos5_dmc_probe(struct platform_device *pdev) * Setup default thresholds for the devfreq governor. * The values are chosen based on experiments. */ - dmc->gov_data.upthreshold = 30; + dmc->gov_data.upthreshold = 10; dmc->gov_data.downdifferential = 5; - exynos5_dmc_df_profile.polling_ms = 500; + exynos5_dmc_df_profile.polling_ms = 100; } - dmc->df = devm_devfreq_add_device(dev, &exynos5_dmc_df_profile, DEVFREQ_GOV_SIMPLE_ONDEMAND, &dmc->gov_data); @@ -1484,7 +1495,7 @@ static int exynos5_dmc_probe(struct platform_device *pdev) if (dmc->in_irq_mode) exynos5_dmc_start_perf_events(dmc, PERF_COUNTER_START_VALUE); - dev_info(dev, "DMC initialized\n"); + dev_info(dev, "DMC initialized, in irq mode: %d\n", dmc->in_irq_mode); return 0; |