diff options
Diffstat (limited to 'drivers/media/video/au0828/au0828-cards.c')
| -rw-r--r-- | drivers/media/video/au0828/au0828-cards.c | 19 |
1 files changed, 15 insertions, 4 deletions
diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c index 1aabaa7e55bb..053bbe8c8e3a 100644 --- a/drivers/media/video/au0828/au0828-cards.c +++ b/drivers/media/video/au0828/au0828-cards.c @@ -46,6 +46,7 @@ struct au0828_board au0828_boards[] = { .name = "Hauppauge HVR850", .tuner_type = TUNER_XC5000, .tuner_addr = 0x61, + .i2c_clk_divider = AU0828_I2C_CLK_30KHZ, .input = { { .type = AU0828_VMUX_TELEVISION, @@ -70,6 +71,13 @@ struct au0828_board au0828_boards[] = { .name = "Hauppauge HVR950Q", .tuner_type = TUNER_XC5000, .tuner_addr = 0x61, + /* The au0828 hardware i2c implementation does not properly + support the xc5000's i2c clock stretching. So we need to + lower the clock frequency enough where the 15us clock + stretch fits inside of a normal clock cycle, or else the + au0828 fails to set the STOP bit. A 30 KHz clock puts the + clock pulse width at 18us */ + .i2c_clk_divider = AU0828_I2C_CLK_30KHZ, .input = { { .type = AU0828_VMUX_TELEVISION, @@ -94,16 +102,19 @@ struct au0828_board au0828_boards[] = { .name = "Hauppauge HVR950Q rev xxF8", .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, + .i2c_clk_divider = AU0828_I2C_CLK_250KHZ, }, [AU0828_BOARD_DVICO_FUSIONHDTV7] = { .name = "DViCO FusionHDTV USB", .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, + .i2c_clk_divider = AU0828_I2C_CLK_250KHZ, }, [AU0828_BOARD_HAUPPAUGE_WOODBURY] = { .name = "Hauppauge Woodbury", .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, + .i2c_clk_divider = AU0828_I2C_CLK_250KHZ, }, }; @@ -200,8 +211,8 @@ void au0828_card_setup(struct au0828_dev *dev) /* Load the analog demodulator driver (note this would need to be abstracted out if we ever need to support a different demod) */ - sd = v4l2_i2c_new_subdev(&dev->i2c_adap, "au8522", "au8522", - 0x8e >> 1); + sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, + "au8522", "au8522", 0x8e >> 1); if (sd == NULL) printk(KERN_ERR "analog subdev registration failed\n"); } @@ -209,8 +220,8 @@ void au0828_card_setup(struct au0828_dev *dev) /* Setup tuners */ if (dev->board.tuner_type != TUNER_ABSENT) { /* Load the tuner module, which does the attach */ - sd = v4l2_i2c_new_subdev(&dev->i2c_adap, "tuner", "tuner", - dev->board.tuner_addr); + sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, + "tuner", "tuner", dev->board.tuner_addr); if (sd == NULL) printk(KERN_ERR "tuner subdev registration fail\n"); |