1 files changed, 499 insertions, 0 deletions

diff --git a/drivers/media/usb/tm6000/tm6000-input.c b/drivers/media/usb/tm6000/tm6000-input.c
new file mode 100644
index 000000000000..dffbd4bd47b1
--- /dev/null
+++ b/drivers/media/usb/tm6000/tm6000-input.c
@@ -0,0 +1,499 @@
+/*
+ *  tm6000-input.c - driver for TM5600/TM6000/TM6010 USB video capture devices
+ *
+ *  Copyright (C) 2010 Stefan Ringel <stefan.ringel@arcor.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include <linux/input.h>
+#include <linux/usb.h>
+
+#include <media/rc-core.h>
+
+#include "tm6000.h"
+#include "tm6000-regs.h"
+
+static unsigned int ir_debug;
+module_param(ir_debug, int, 0644);
+MODULE_PARM_DESC(ir_debug, "debug message level");
+
+static unsigned int enable_ir = 1;
+module_param(enable_ir, int, 0644);
+MODULE_PARM_DESC(enable_ir, "enable ir (default is enable)");
+
+static unsigned int ir_clock_mhz = 12;
+module_param(ir_clock_mhz, int, 0644);
+MODULE_PARM_DESC(enable_ir, "ir clock, in MHz");
+
+#define URB_SUBMIT_DELAY	100	/* ms - Delay to submit an URB request on retrial and init */
+#define URB_INT_LED_DELAY	100	/* ms - Delay to turn led on again on int mode */
+
+#undef dprintk
+
+#define dprintk(level, fmt, arg...) do {\
+	if (ir_debug >= level) \
+		printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \
+	} while (0)
+
+struct tm6000_ir_poll_result {
+	u16 rc_data;
+};
+
+struct tm6000_IR {
+	struct tm6000_core	*dev;
+	struct rc_dev		*rc;
+	char			name[32];
+	char			phys[32];
+
+	/* poll expernal decoder */
+	int			polling;
+	struct delayed_work	work;
+	u8			wait:1;
+	u8			pwled:2;
+	u8			submit_urb:1;
+	u16			key_addr;
+	struct urb		*int_urb;
+
+	/* IR device properties */
+	u64			rc_type;
+};
+
+void tm6000_ir_wait(struct tm6000_core *dev, u8 state)
+{
+	struct tm6000_IR *ir = dev->ir;
+
+	if (!dev->ir)
+		return;
+
+	dprintk(2, "%s: %i\n",__func__, ir->wait);
+
+	if (state)
+		ir->wait = 1;
+	else
+		ir->wait = 0;
+}
+
+static int tm6000_ir_config(struct tm6000_IR *ir)
+{
+	struct tm6000_core *dev = ir->dev;
+	u32 pulse = 0, leader = 0;
+
+	dprintk(2, "%s\n",__func__);
+
+	/*
+	 * The IR decoder supports RC-5 or NEC, with a configurable timing.
+	 * The timing configuration there is not that accurate, as it uses
+	 * approximate values. The NEC spec mentions a 562.5 unit period,
+	 * and RC-5 uses a 888.8 period.
+	 * Currently, driver assumes a clock provided by a 12 MHz XTAL, but
+	 * a modprobe parameter can adjust it.
+	 * Adjustments are required for other timings.
+	 * It seems that the 900ms timing for NEC is used to detect a RC-5
+	 * IR, in order to discard such decoding
+	 */
+
+	switch (ir->rc_type) {
+	case RC_TYPE_NEC:
+		leader = 900;	/* ms */
+		pulse  = 700;	/* ms - the actual value would be 562 */
+		break;
+	default:
+	case RC_TYPE_RC5:
+		leader = 900;	/* ms - from the NEC decoding */
+		pulse  = 1780;	/* ms - The actual value would be 1776 */
+		break;
+	}
+
+	pulse = ir_clock_mhz * pulse;
+	leader = ir_clock_mhz * leader;
+	if (ir->rc_type == RC_TYPE_NEC)
+		leader = leader | 0x8000;
+
+	dprintk(2, "%s: %s, %d MHz, leader = 0x%04x, pulse = 0x%06x \n",
+		__func__,
+		(ir->rc_type == RC_TYPE_NEC) ? "NEC" : "RC-5",
+		ir_clock_mhz, leader, pulse);
+
+	/* Remote WAKEUP = enable, normal mode, from IR decoder output */
+	tm6000_set_reg(dev, TM6010_REQ07_RE5_REMOTE_WAKEUP, 0xfe);
+
+	/* Enable IR reception on non-busrt mode */
+	tm6000_set_reg(dev, TM6010_REQ07_RD8_IR, 0x2f);
+
+	/* IR_WKUP_SEL = Low byte in decoded IR data */
+	tm6000_set_reg(dev, TM6010_REQ07_RDA_IR_WAKEUP_SEL, 0xff);
+	/* IR_WKU_ADD code */
+	tm6000_set_reg(dev, TM6010_REQ07_RDB_IR_WAKEUP_ADD, 0xff);
+
+	tm6000_set_reg(dev, TM6010_REQ07_RDC_IR_LEADER1, leader >> 8);
+	tm6000_set_reg(dev, TM6010_REQ07_RDD_IR_LEADER0, leader);
+
+	tm6000_set_reg(dev, TM6010_REQ07_RDE_IR_PULSE_CNT1, pulse >> 8);
+	tm6000_set_reg(dev, TM6010_REQ07_RDF_IR_PULSE_CNT0, pulse);
+
+	if (!ir->polling)
+		tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0);
+	else
+		tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 1);
+	msleep(10);
+
+	/* Shows that IR is working via the LED */
+	tm6000_flash_led(dev, 0);
+	msleep(100);
+	tm6000_flash_led(dev, 1);
+	ir->pwled = 1;
+
+	return 0;
+}
+
+static void tm6000_ir_urb_received(struct urb *urb)
+{
+	struct tm6000_core *dev = urb->context;
+	struct tm6000_IR *ir = dev->ir;
+	struct tm6000_ir_poll_result poll_result;
+	char *buf;
+
+	dprintk(2, "%s\n",__func__);
+	if (urb->status < 0 || urb->actual_length <= 0) {
+		printk(KERN_INFO "tm6000: IR URB failure: status: %i, length %i\n",
+		       urb->status, urb->actual_length);
+		ir->submit_urb = 1;
+		schedule_delayed_work(&ir->work, msecs_to_jiffies(URB_SUBMIT_DELAY));
+		return;
+	}
+	buf = urb->transfer_buffer;
+
+	if (ir_debug)
+		print_hex_dump(KERN_DEBUG, "tm6000: IR data: ",
+			       DUMP_PREFIX_OFFSET,16, 1,
+			       buf, urb->actual_length, false);
+
+	poll_result.rc_data = buf[0];
+	if (urb->actual_length > 1)
+		poll_result.rc_data |= buf[1] << 8;
+
+	dprintk(1, "%s, scancode: 0x%04x\n",__func__, poll_result.rc_data);
+	rc_keydown(ir->rc, poll_result.rc_data, 0);
+
+	usb_submit_urb(urb, GFP_ATOMIC);
+	/*
+	 * Flash the led. We can't do it here, as it is running on IRQ context.
+	 * So, use the scheduler to do it, in a few ms.
+	 */
+	ir->pwled = 2;
+	schedule_delayed_work(&ir->work, msecs_to_jiffies(10));
+}
+
+static void tm6000_ir_handle_key(struct work_struct *work)
+{
+	struct tm6000_IR *ir = container_of(work, struct tm6000_IR, work.work);
+	struct tm6000_core *dev = ir->dev;
+	struct tm6000_ir_poll_result poll_result;
+	int rc;
+	u8 buf[2];
+
+	if (ir->wait)
+		return;
+
+	dprintk(3, "%s\n",__func__);
+
+	rc = tm6000_read_write_usb(dev, USB_DIR_IN |
+		USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		REQ_02_GET_IR_CODE, 0, 0, buf, 2);
+	if (rc < 0)
+		return;
+
+	if (rc > 1)
+		poll_result.rc_data = buf[0] | buf[1] << 8;
+	else
+		poll_result.rc_data = buf[0];
+
+	/* Check if something was read */
+	if ((poll_result.rc_data & 0xff) == 0xff) {
+		if (!ir->pwled) {
+			tm6000_flash_led(dev, 1);
+			ir->pwled = 1;
+		}
+		return;
+	}
+
+	dprintk(1, "%s, scancode: 0x%04x\n",__func__, poll_result.rc_data);
+	rc_keydown(ir->rc, poll_result.rc_data, 0);
+	tm6000_flash_led(dev, 0);
+	ir->pwled = 0;
+
+	/* Re-schedule polling */
+	schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling));
+}
+
+static void tm6000_ir_int_work(struct work_struct *work)
+{
+	struct tm6000_IR *ir = container_of(work, struct tm6000_IR, work.work);
+	struct tm6000_core *dev = ir->dev;
+	int rc;
+
+	dprintk(3, "%s, submit_urb = %d, pwled = %d\n",__func__, ir->submit_urb,
+		ir->pwled);
+
+	if (ir->submit_urb) {
+		dprintk(3, "Resubmit urb\n");
+		tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0);
+
+		rc = usb_submit_urb(ir->int_urb, GFP_ATOMIC);
+		if (rc < 0) {
+			printk(KERN_ERR "tm6000: Can't submit an IR interrupt. Error %i\n",
+			       rc);
+			/* Retry in 100 ms */
+			schedule_delayed_work(&ir->work, msecs_to_jiffies(URB_SUBMIT_DELAY));
+			return;
+		}
+		ir->submit_urb = 0;
+	}
+
+	/* Led is enabled only if USB submit doesn't fail */
+	if (ir->pwled == 2) {
+		tm6000_flash_led(dev, 0);
+		ir->pwled = 0;
+		schedule_delayed_work(&ir->work, msecs_to_jiffies(URB_INT_LED_DELAY));
+	} else if (!ir->pwled) {
+		tm6000_flash_led(dev, 1);
+		ir->pwled = 1;
+	}
+}
+
+static int tm6000_ir_start(struct rc_dev *rc)
+{
+	struct tm6000_IR *ir = rc->priv;
+
+	dprintk(2, "%s\n",__func__);
+
+	schedule_delayed_work(&ir->work, 0);
+
+	return 0;
+}
+
+static void tm6000_ir_stop(struct rc_dev *rc)
+{
+	struct tm6000_IR *ir = rc->priv;
+
+	dprintk(2, "%s\n",__func__);
+
+	cancel_delayed_work_sync(&ir->work);
+}
+
+static int tm6000_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
+{
+	struct tm6000_IR *ir = rc->priv;
+
+	if (!ir)
+		return 0;
+
+	dprintk(2, "%s\n",__func__);
+
+	if ((rc->rc_map.scan) && (rc_type == RC_TYPE_NEC))
+		ir->key_addr = ((rc->rc_map.scan[0].scancode >> 8) & 0xffff);
+
+	ir->rc_type = rc_type;
+
+	tm6000_ir_config(ir);
+	/* TODO */
+	return 0;
+}
+
+static int __tm6000_ir_int_start(struct rc_dev *rc)
+{
+	struct tm6000_IR *ir = rc->priv;
+	struct tm6000_core *dev;
+	int pipe, size;
+	int err = -ENOMEM;
+
+	if (!ir)
+		return -ENODEV;
+	dev = ir->dev;
+
+	dprintk(2, "%s\n",__func__);
+
+	ir->int_urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!ir->int_urb)
+		return -ENOMEM;
+
+	pipe = usb_rcvintpipe(dev->udev,
+		dev->int_in.endp->desc.bEndpointAddress
+		& USB_ENDPOINT_NUMBER_MASK);
+
+	size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe));
+	dprintk(1, "IR max size: %d\n", size);
+
+	ir->int_urb->transfer_buffer = kzalloc(size, GFP_ATOMIC);
+	if (ir->int_urb->transfer_buffer == NULL) {
+		usb_free_urb(ir->int_urb);
+		return err;
+	}
+	dprintk(1, "int interval: %d\n", dev->int_in.endp->desc.bInterval);
+
+	usb_fill_int_urb(ir->int_urb, dev->udev, pipe,
+		ir->int_urb->transfer_buffer, size,
+		tm6000_ir_urb_received, dev,
+		dev->int_in.endp->desc.bInterval);
+
+	ir->submit_urb = 1;
+	schedule_delayed_work(&ir->work, msecs_to_jiffies(URB_SUBMIT_DELAY));
+
+	return 0;
+}
+
+static void __tm6000_ir_int_stop(struct rc_dev *rc)
+{
+	struct tm6000_IR *ir = rc->priv;
+
+	if (!ir || !ir->int_urb)
+		return;
+
+	dprintk(2, "%s\n",__func__);
+
+	usb_kill_urb(ir->int_urb);
+	kfree(ir->int_urb->transfer_buffer);
+	usb_free_urb(ir->int_urb);
+	ir->int_urb = NULL;
+}
+
+int tm6000_ir_int_start(struct tm6000_core *dev)
+{
+	struct tm6000_IR *ir = dev->ir;
+
+	if (!ir)
+		return 0;
+
+	return __tm6000_ir_int_start(ir->rc);
+}
+
+void tm6000_ir_int_stop(struct tm6000_core *dev)
+{
+	struct tm6000_IR *ir = dev->ir;
+
+	if (!ir || !ir->rc)
+		return;
+
+	__tm6000_ir_int_stop(ir->rc);
+}
+
+int tm6000_ir_init(struct tm6000_core *dev)
+{
+	struct tm6000_IR *ir;
+	struct rc_dev *rc;
+	int err = -ENOMEM;
+
+	if (!enable_ir)
+		return -ENODEV;
+
+	if (!dev->caps.has_remote)
+		return 0;
+
+	if (!dev->ir_codes)
+		return 0;
+
+	ir = kzalloc(sizeof(*ir), GFP_ATOMIC);
+	rc = rc_allocate_device();
+	if (!ir || !rc)
+		goto out;
+
+	dprintk(2, "%s\n", __func__);
+
+	/* record handles to ourself */
+	ir->dev = dev;
+	dev->ir = ir;
+	ir->rc = rc;
+
+	/* input setup */
+	rc->allowed_protos = RC_TYPE_RC5 | RC_TYPE_NEC;
+	/* Neded, in order to support NEC remotes with 24 or 32 bits */
+	rc->scanmask = 0xffff;
+	rc->priv = ir;
+	rc->change_protocol = tm6000_ir_change_protocol;
+	if (dev->int_in.endp) {
+		rc->open    = __tm6000_ir_int_start;
+		rc->close   = __tm6000_ir_int_stop;
+		INIT_DELAYED_WORK(&ir->work, tm6000_ir_int_work);
+	} else {
+		rc->open  = tm6000_ir_start;
+		rc->close = tm6000_ir_stop;
+		ir->polling = 50;
+		INIT_DELAYED_WORK(&ir->work, tm6000_ir_handle_key);
+	}
+	rc->driver_type = RC_DRIVER_SCANCODE;
+
+	snprintf(ir->name, sizeof(ir->name), "tm5600/60x0 IR (%s)",
+						dev->name);
+
+	usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
+	strlcat(ir->phys, "/input0", sizeof(ir->phys));
+
+	tm6000_ir_change_protocol(rc, RC_TYPE_UNKNOWN);
+
+	rc->input_name = ir->name;
+	rc->input_phys = ir->phys;
+	rc->input_id.bustype = BUS_USB;
+	rc->input_id.version = 1;
+	rc->input_id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
+	rc->input_id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
+	rc->map_name = dev->ir_codes;
+	rc->driver_name = "tm6000";
+	rc->dev.parent = &dev->udev->dev;
+
+	/* ir register */
+	err = rc_register_device(rc);
+	if (err)
+		goto out;
+
+	return 0;
+
+out:
+	dev->ir = NULL;
+	rc_free_device(rc);
+	kfree(ir);
+	return err;
+}
+
+int tm6000_ir_fini(struct tm6000_core *dev)
+{
+	struct tm6000_IR *ir = dev->ir;
+
+	/* skip detach on non attached board */
+
+	if (!ir)
+		return 0;
+
+	dprintk(2, "%s\n",__func__);
+
+	if (!ir->polling)
+		__tm6000_ir_int_stop(ir->rc);
+
+	tm6000_ir_stop(ir->rc);
+
+	/* Turn off the led */
+	tm6000_flash_led(dev, 0);
+	ir->pwled = 0;
+
+	rc_unregister_device(ir->rc);
+
+	kfree(ir);
+	dev->ir = NULL;
+
+	return 0;
+}