3 files changed, 476 insertions, 1 deletions

diff --git a/drivers/media/usb/dvb-usb-v2/Kconfig b/drivers/media/usb/dvb-usb-v2/Kconfig
index 082b8d67244b..df4412245a8a 100644
--- a/drivers/media/usb/dvb-usb-v2/Kconfig
+++ b/drivers/media/usb/dvb-usb-v2/Kconfig
@@ -96,10 +96,13 @@ config DVB_USB_GL861
 	tristate "Genesys Logic GL861 USB2.0 support"
 	depends on DVB_USB_V2
 	select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TC90522 if MEDIA_SUBDRV_AUTOSELECT
 	select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y here to support the MSI Megasky 580 (55801) DVB-T USB2.0
-	  receiver with USB ID 0db0:5581.
+	  receiver with USB ID 0db0:5581, Friio White ISDB-T receiver
+	  with USB ID 0x7a69:0001.
 
 config DVB_USB_LME2510
 	tristate "LME DM04/QQBOX DVB-S USB2.0 support"
diff --git a/drivers/media/usb/dvb-usb-v2/gl861.c b/drivers/media/usb/dvb-usb-v2/gl861.c
index fee4b30df778..3338b21d8b25 100644
--- a/drivers/media/usb/dvb-usb-v2/gl861.c
+++ b/drivers/media/usb/dvb-usb-v2/gl861.c
@@ -6,10 +6,14 @@
  *
  * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
  */
+#include <linux/string.h>
+
 #include "gl861.h"
 
 #include "zl10353.h"
 #include "qt1010.h"
+#include "tc90522.h"
+#include "dvb-pll.h"
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
@@ -161,11 +165,478 @@ static struct dvb_usb_device_properties gl861_props = {
 	}
 };
 
+
+/*
+ * For Friio
+ */
+
+struct friio_priv {
+	struct i2c_adapter *demod_sub_i2c;
+	struct i2c_client  *i2c_client_demod;
+	struct i2c_client  *i2c_client_tuner;
+	struct i2c_adapter tuner_adap;
+};
+
+struct friio_config {
+	struct i2c_board_info demod_info;
+	struct tc90522_config demod_cfg;
+
+	struct i2c_board_info tuner_info;
+	struct dvb_pll_config tuner_cfg;
+};
+
+static const struct friio_config friio_config = {
+	.demod_info = { I2C_BOARD_INFO(TC90522_I2C_DEV_TER, 0x18), },
+	.tuner_info = { I2C_BOARD_INFO("tua6034_friio", 0x60), },
+};
+
+/* For another type of I2C:
+ * message sent by a USB control-read/write transaction with data stage.
+ * Used in init/config of Friio.
+ */
+static int
+gl861_i2c_write_ex(struct dvb_usb_device *d, u8 addr, u8 *wbuf, u16 wlen)
+{
+	u8 *buf;
+	int ret;
+
+	buf = kmalloc(wlen, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	memcpy(buf, wbuf, wlen);
+	ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
+				 GL861_REQ_I2C_RAW, GL861_WRITE,
+				 addr << (8 + 1), 0x0100, buf, wlen, 2000);
+	kfree(buf);
+	return ret;
+}
+
+static int
+gl861_i2c_read_ex(struct dvb_usb_device *d, u8 addr, u8 *rbuf, u16 rlen)
+{
+	u8 *buf;
+	int ret;
+
+	buf = kmalloc(rlen, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
+				 GL861_REQ_I2C_READ, GL861_READ,
+				 addr << (8 + 1), 0x0100, buf, rlen, 2000);
+	if (ret > 0 && rlen > 0)
+		memcpy(buf, rbuf, rlen);
+	kfree(buf);
+	return ret;
+}
+
+/* For I2C transactions to the tuner of Friio (dvb_pll).
+ *
+ * Friio uses irregular USB encapsulation for tuner i2c transactions:
+ * write transacions are encapsulated with a different USB 'request' value.
+ *
+ * Although all transactions are sent via the demod(tc90522)
+ * and the demod provides an i2c adapter for them, it cannot be used in Friio
+ * since it assumes using the same parent adapter with the demod,
+ * which does not use the request value and uses same one for both read/write.
+ * So we define a dedicated i2c adapter here.
+ */
+
+static int
+friio_i2c_tuner_read(struct dvb_usb_device *d, struct i2c_msg *msg)
+{
+	struct friio_priv *priv;
+	u8 addr;
+
+	priv = d_to_priv(d);
+	addr = priv->i2c_client_demod->addr;
+	return gl861_i2c_read_ex(d, addr, msg->buf, msg->len);
+}
+
+static int
+friio_i2c_tuner_write(struct dvb_usb_device *d, struct i2c_msg *msg)
+{
+	u8 *buf;
+	int ret;
+	struct friio_priv *priv;
+
+	priv = d_to_priv(d);
+
+	if (msg->len < 1)
+		return -EINVAL;
+
+	buf = kmalloc(msg->len + 1, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	buf[0] = msg->addr << 1;
+	memcpy(buf + 1, msg->buf, msg->len);
+
+	ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
+				 GL861_REQ_I2C_RAW, GL861_WRITE,
+				 priv->i2c_client_demod->addr << (8 + 1),
+				 0xFE, buf, msg->len + 1, 2000);
+	kfree(buf);
+	return ret;
+}
+
+static int friio_tuner_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+				int num)
+{
+	struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	int i;
+
+	if (num > 2)
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+		return -EAGAIN;
+
+	for (i = 0; i < num; i++) {
+		int ret;
+
+		if (msg[i].flags & I2C_M_RD)
+			ret = friio_i2c_tuner_read(d, &msg[i]);
+		else
+			ret = friio_i2c_tuner_write(d, &msg[i]);
+
+		if (ret < 0)
+			break;
+
+		usleep_range(1000, 2000); /* avoid I2C errors */
+	}
+
+	mutex_unlock(&d->i2c_mutex);
+	return i;
+}
+
+static struct i2c_algorithm friio_tuner_i2c_algo = {
+	.master_xfer   = friio_tuner_i2c_xfer,
+	.functionality = gl861_i2c_func,
+};
+
+/* GPIO control in Friio */
+
+#define FRIIO_CTL_LNB (1 << 0)
+#define FRIIO_CTL_STROBE (1 << 1)
+#define FRIIO_CTL_CLK (1 << 2)
+#define FRIIO_CTL_LED (1 << 3)
+
+#define FRIIO_LED_RUNNING 0x6400ff64
+#define FRIIO_LED_STOPPED 0x96ff00ff
+
+/* control PIC16F676 attached to Friio */
+static int friio_ext_ctl(struct dvb_usb_device *d,
+			    u32 sat_color, int power_on)
+{
+	int i, ret;
+	struct i2c_msg msg;
+	u8 *buf;
+	u32 mask;
+	u8 power = (power_on) ? FRIIO_CTL_LNB : 0;
+
+	buf = kmalloc(2, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	msg.addr = 0x00;
+	msg.flags = 0;
+	msg.len = 2;
+	msg.buf = buf;
+	buf[0] = 0x00;
+
+	/* send 2bit header (&B10) */
+	buf[1] = power | FRIIO_CTL_LED | FRIIO_CTL_STROBE;
+	ret = i2c_transfer(&d->i2c_adap, &msg, 1);
+	buf[1] |= FRIIO_CTL_CLK;
+	ret += i2c_transfer(&d->i2c_adap, &msg, 1);
+
+	buf[1] = power | FRIIO_CTL_STROBE;
+	ret += i2c_transfer(&d->i2c_adap, &msg, 1);
+	buf[1] |= FRIIO_CTL_CLK;
+	ret += i2c_transfer(&d->i2c_adap, &msg, 1);
+
+	/* send 32bit(satur, R, G, B) data in serial */
+	mask = 1 << 31;
+	for (i = 0; i < 32; i++) {
+		buf[1] = power | FRIIO_CTL_STROBE;
+		if (sat_color & mask)
+			buf[1] |= FRIIO_CTL_LED;
+		ret += i2c_transfer(&d->i2c_adap, &msg, 1);
+		buf[1] |= FRIIO_CTL_CLK;
+		ret += i2c_transfer(&d->i2c_adap, &msg, 1);
+		mask >>= 1;
+	}
+
+	/* set the strobe off */
+	buf[1] = power;
+	ret += i2c_transfer(&d->i2c_adap, &msg, 1);
+	buf[1] |= FRIIO_CTL_CLK;
+	ret += i2c_transfer(&d->i2c_adap, &msg, 1);
+
+	kfree(buf);
+	return (ret == 70) ? 0 : -EREMOTEIO;
+}
+
+/* init/config of gl861 for Friio */
+/* NOTE:
+ * This function cannot be moved to friio_init()/dvb_usbv2_init(),
+ * because the init defined here must be done before any activities like I2C,
+ * but friio_init() is called by dvb-usbv2 after {_frontend, _tuner}_attach(),
+ * where I2C communication is used.
+ * Thus this function is set to be called from _power_ctl().
+ *
+ * Since it will be called on the early init stage
+ * where the i2c adapter is not initialized yet,
+ * we cannot use i2c_transfer() here.
+ */
+static int friio_reset(struct dvb_usb_device *d)
+{
+	int i, ret;
+	u8 wbuf[2], rbuf[2];
+
+	static const u8 friio_init_cmds[][2] = {
+		{0x33, 0x08}, {0x37, 0x40}, {0x3a, 0x1f}, {0x3b, 0xff},
+		{0x3c, 0x1f}, {0x3d, 0xff}, {0x38, 0x00}, {0x35, 0x00},
+		{0x39, 0x00}, {0x36, 0x00},
+	};
+
+	ret = usb_set_interface(d->udev, 0, 0);
+	if (ret < 0)
+		return ret;
+
+	wbuf[0] = 0x11;
+	wbuf[1] = 0x02;
+	ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+	if (ret < 0)
+		return ret;
+	usleep_range(2000, 3000);
+
+	wbuf[0] = 0x11;
+	wbuf[1] = 0x00;
+	ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Check if the dev is really a Friio White, since it might be
+	 * another device, Friio Black, with the same VID/PID.
+	 */
+
+	usleep_range(1000, 2000);
+	wbuf[0] = 0x03;
+	wbuf[1] = 0x80;
+	ret = gl861_i2c_write_ex(d, 0x09, wbuf, 2);
+	if (ret < 0)
+		return ret;
+
+	usleep_range(2000, 3000);
+	ret = gl861_i2c_read_ex(d, 0x09, rbuf, 2);
+	if (ret < 0)
+		return ret;
+	if (rbuf[0] != 0xff || rbuf[1] != 0xff)
+		return -ENODEV;
+
+
+	usleep_range(1000, 2000);
+	ret = gl861_i2c_write_ex(d, 0x48, wbuf, 2);
+	if (ret < 0)
+		return ret;
+
+	usleep_range(2000, 3000);
+	ret = gl861_i2c_read_ex(d, 0x48, rbuf, 2);
+	if (ret < 0)
+		return ret;
+	if (rbuf[0] != 0xff || rbuf[1] != 0xff)
+		return -ENODEV;
+
+	wbuf[0] = 0x30;
+	wbuf[1] = 0x04;
+	ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+	if (ret < 0)
+		return ret;
+
+	wbuf[0] = 0x00;
+	wbuf[1] = 0x01;
+	ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+	if (ret < 0)
+		return ret;
+
+	wbuf[0] = 0x06;
+	wbuf[1] = 0x0f;
+	ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < ARRAY_SIZE(friio_init_cmds); i++) {
+		ret = gl861_i2c_msg(d, 0x00, (u8 *)friio_init_cmds[i], 2,
+				      NULL, 0);
+		if (ret < 0)
+			return ret;
+	}
+	return 0;
+}
+
+/*
+ * DVB callbacks for Friio
+ */
+
+static int friio_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+	return onoff ? friio_reset(d) : 0;
+}
+
+static int friio_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	const struct i2c_board_info *info;
+	struct dvb_usb_device *d;
+	struct tc90522_config cfg;
+	struct i2c_client *cl;
+	struct friio_priv *priv;
+
+	info = &friio_config.demod_info;
+	d = adap_to_d(adap);
+	cl = dvb_module_probe("tc90522", info->type,
+			      &d->i2c_adap, info->addr, &cfg);
+	if (!cl)
+		return -ENODEV;
+	adap->fe[0] = cfg.fe;
+
+	/* ignore cfg.tuner_i2c and create new one */
+	priv = adap_to_priv(adap);
+	priv->i2c_client_demod = cl;
+	priv->tuner_adap.algo = &friio_tuner_i2c_algo;
+	priv->tuner_adap.dev.parent = &d->udev->dev;
+	strlcpy(priv->tuner_adap.name, d->name, sizeof(priv->tuner_adap.name));
+	strlcat(priv->tuner_adap.name, "-tuner", sizeof(priv->tuner_adap.name));
+	priv->demod_sub_i2c = &priv->tuner_adap;
+	i2c_set_adapdata(&priv->tuner_adap, d);
+
+	return i2c_add_adapter(&priv->tuner_adap);
+}
+
+static int friio_frontend_detach(struct dvb_usb_adapter *adap)
+{
+	struct friio_priv *priv;
+
+	priv = adap_to_priv(adap);
+	i2c_del_adapter(&priv->tuner_adap);
+	dvb_module_release(priv->i2c_client_demod);
+	return 0;
+}
+
+static int friio_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	const struct i2c_board_info *info;
+	struct dvb_pll_config cfg;
+	struct i2c_client *cl;
+	struct friio_priv *priv;
+
+	priv = adap_to_priv(adap);
+	info = &friio_config.tuner_info;
+	cfg = friio_config.tuner_cfg;
+	cfg.fe = adap->fe[0];
+
+	cl = dvb_module_probe("dvb_pll", info->type,
+			      priv->demod_sub_i2c, info->addr, &cfg);
+	if (!cl)
+		return -ENODEV;
+	priv->i2c_client_tuner = cl;
+	return 0;
+}
+
+static int friio_tuner_detach(struct dvb_usb_adapter *adap)
+{
+	struct friio_priv *priv;
+
+	priv = adap_to_priv(adap);
+	dvb_module_release(priv->i2c_client_tuner);
+	return 0;
+}
+
+static int friio_init(struct dvb_usb_device *d)
+{
+	int i;
+	int ret;
+	struct friio_priv *priv;
+
+	static const u8 demod_init[][2] = {
+		{0x01, 0x40}, {0x04, 0x38}, {0x05, 0x40}, {0x07, 0x40},
+		{0x0f, 0x4f}, {0x11, 0x21}, {0x12, 0x0b}, {0x13, 0x2f},
+		{0x14, 0x31}, {0x16, 0x02}, {0x21, 0xc4}, {0x22, 0x20},
+		{0x2c, 0x79}, {0x2d, 0x34}, {0x2f, 0x00}, {0x30, 0x28},
+		{0x31, 0x31}, {0x32, 0xdf}, {0x38, 0x01}, {0x39, 0x78},
+		{0x3b, 0x33}, {0x3c, 0x33}, {0x48, 0x90}, {0x51, 0x68},
+		{0x5e, 0x38}, {0x71, 0x00}, {0x72, 0x08}, {0x77, 0x00},
+		{0xc0, 0x21}, {0xc1, 0x10}, {0xe4, 0x1a}, {0xea, 0x1f},
+		{0x77, 0x00}, {0x71, 0x00}, {0x71, 0x00}, {0x76, 0x0c},
+	};
+
+	/* power on LNA? */
+	ret = friio_ext_ctl(d, FRIIO_LED_STOPPED, true);
+	if (ret < 0)
+		return ret;
+	msleep(20);
+
+	/* init/config demod */
+	priv = d_to_priv(d);
+	for (i = 0; i < ARRAY_SIZE(demod_init); i++) {
+		int ret;
+
+		ret = i2c_master_send(priv->i2c_client_demod, demod_init[i], 2);
+		if (ret < 0)
+			return ret;
+	}
+	msleep(100);
+	return 0;
+}
+
+static void friio_exit(struct dvb_usb_device *d)
+{
+	friio_ext_ctl(d, FRIIO_LED_STOPPED, false);
+}
+
+static int friio_streaming_ctrl(struct dvb_frontend *fe, int onoff)
+{
+	u32 led_color;
+
+	led_color = onoff ? FRIIO_LED_RUNNING : FRIIO_LED_STOPPED;
+	return friio_ext_ctl(fe_to_d(fe), led_color, true);
+}
+
+
+static struct dvb_usb_device_properties friio_props = {
+	.driver_name = KBUILD_MODNAME,
+	.owner = THIS_MODULE,
+	.adapter_nr = adapter_nr,
+
+	.size_of_priv = sizeof(struct friio_priv),
+
+	.i2c_algo = &gl861_i2c_algo,
+	.power_ctrl = friio_power_ctrl,
+	.frontend_attach = friio_frontend_attach,
+	.frontend_detach = friio_frontend_detach,
+	.tuner_attach = friio_tuner_attach,
+	.tuner_detach = friio_tuner_detach,
+	.init = friio_init,
+	.exit = friio_exit,
+	.streaming_ctrl = friio_streaming_ctrl,
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+			.stream = DVB_USB_STREAM_BULK(0x01, 8, 16384),
+		}
+	}
+};
+
 static const struct usb_device_id gl861_id_table[] = {
 	{ DVB_USB_DEVICE(USB_VID_MSI, USB_PID_MSI_MEGASKY580_55801,
 		&gl861_props, "MSI Mega Sky 55801 DVB-T USB2.0", NULL) },
 	{ DVB_USB_DEVICE(USB_VID_ALINK, USB_VID_ALINK_DTU,
 		&gl861_props, "A-LINK DTU DVB-T USB2.0", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_774, USB_PID_FRIIO_WHITE,
+		&friio_props, "774 Friio White ISDB-T USB2.0", NULL) },
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, gl861_id_table);
diff --git a/drivers/media/usb/dvb-usb-v2/gl861.h b/drivers/media/usb/dvb-usb-v2/gl861.h
index b651b857e034..02c00e10748a 100644
--- a/drivers/media/usb/dvb-usb-v2/gl861.h
+++ b/drivers/media/usb/dvb-usb-v2/gl861.h
@@ -9,5 +9,6 @@
 
 #define GL861_REQ_I2C_WRITE	0x01
 #define GL861_REQ_I2C_READ	0x02
+#define GL861_REQ_I2C_RAW	0x03
 
 #endif