diff options
Diffstat (limited to 'drivers/isdn/hisax/Kconfig')
| -rw-r--r-- | drivers/isdn/hisax/Kconfig | 423 |
1 files changed, 0 insertions, 423 deletions
diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig deleted file mode 100644 index 43d98ccf5ff6..000000000000 --- a/drivers/isdn/hisax/Kconfig +++ /dev/null @@ -1,423 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - -menu "Passive cards" - -config ISDN_DRV_HISAX - tristate "HiSax SiemensChipSet driver support" - select CRC_CCITT - ---help--- - This is a driver supporting the Siemens chipset on various - ISDN-cards (like AVM A1, Elsa ISDN cards, Teles S0-16.0, Teles - S0-16.3, Teles S0-8, Teles/Creatix PnP, ITK micro ix1 and many - compatibles). - - HiSax is just the name of this driver, not the name of any hardware. - - If you have a card with such a chipset, you should say Y here and - also to the configuration option of the driver for your particular - card, below. - -if ISDN_DRV_HISAX - -comment "D-channel protocol features" - -config HISAX_EURO - bool "HiSax Support for EURO/DSS1" - help - Say Y or N according to the D-channel protocol which your local - telephone service company provides. - - The call control protocol E-DSS1 is used in most European countries. - If unsure, say Y. - -config DE_AOC - bool "Support for german chargeinfo" - depends on HISAX_EURO - help - If you want that the HiSax hardware driver sends messages to the - upper level of the isdn code on each AOCD (Advice Of Charge, During - the call -- transmission of the fee information during a call) and - on each AOCE (Advice Of Charge, at the End of the call -- - transmission of fee information at the end of the call), say Y here. - This works only in Germany. - -config HISAX_NO_SENDCOMPLETE - bool "Disable sending complete" - depends on HISAX_EURO - help - If you have trouble with some ugly exchanges or you live in - Australia select this option. - -config HISAX_NO_LLC - bool "Disable sending low layer compatibility" - depends on HISAX_EURO - help - If you have trouble with some ugly exchanges try to select this - option. - -config HISAX_NO_KEYPAD - bool "Disable keypad protocol option" - depends on HISAX_EURO - help - If you like to send special dial strings including * or # without - using the keypad protocol, select this option. - -config HISAX_1TR6 - bool "HiSax Support for german 1TR6" - help - Say Y or N according to the D-channel protocol which your local - telephone service company provides. - - 1TR6 is an old call control protocol which was used in Germany - before E-DSS1 was established. Nowadays, all new lines in Germany - use E-DSS1. - -config HISAX_NI1 - bool "HiSax Support for US NI1" - help - Enable this if you like to use ISDN in US on a NI1 basic rate - interface. - -config HISAX_MAX_CARDS - int "Maximum number of cards supported by HiSax" - default "8" - help - This option allows you to specify the maximum number of cards which - the HiSax driver will be able to handle. - -comment "HiSax supported cards" - -config HISAX_16_0 - bool "Teles 16.0/8.0" - depends on ISA - help - This enables HiSax support for the Teles ISDN-cards S0-16.0, S0-8 - and many compatibles. - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using the different cards, a different D-channel protocol, or - non-standard IRQ/port/shmem settings. - -config HISAX_16_3 - bool "Teles 16.3 or PNP or PCMCIA" - help - This enables HiSax support for the Teles ISDN-cards S0-16.3 the - Teles/Creatix PnP and the Teles PCMCIA. - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using the different cards, a different D-channel protocol, or - non-standard IRQ/port settings. - -config HISAX_TELESPCI - bool "Teles PCI" - depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN))) - help - This enables HiSax support for the Teles PCI. - See <file:Documentation/isdn/README.HiSax> on how to configure it. - -config HISAX_S0BOX - bool "Teles S0Box" - help - This enables HiSax support for the Teles/Creatix parallel port - S0BOX. See <file:Documentation/isdn/README.HiSax> on how to - configure it. - -config HISAX_AVM_A1 - bool "AVM A1 (Fritz)" - depends on ISA - help - This enables HiSax support for the AVM A1 (aka "Fritz"). - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using the different cards, a different D-channel protocol, or - non-standard IRQ/port settings. - -config HISAX_FRITZPCI - bool "AVM PnP/PCI (Fritz!PnP/PCI)" - depends on BROKEN || !PPC64 - help - This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI". - See <file:Documentation/isdn/README.HiSax> on how to configure it. - -config HISAX_AVM_A1_PCMCIA - bool "AVM A1 PCMCIA (Fritz)" - help - This enables HiSax support for the AVM A1 "Fritz!PCMCIA"). - See <file:Documentation/isdn/README.HiSax> on how to configure it. - -config HISAX_ELSA - bool "Elsa cards" - help - This enables HiSax support for the Elsa Mircolink ISA cards, for the - Elsa Quickstep series cards and Elsa PCMCIA. - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using the different cards, a different D-channel protocol, or - non-standard IRQ/port settings. - -config HISAX_IX1MICROR2 - bool "ITK ix1-micro Revision 2" - depends on ISA - help - This enables HiSax support for the ITK ix1-micro Revision 2 card. - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using the different cards, a different D-channel protocol, or - non-standard IRQ/port settings. - -config HISAX_DIEHLDIVA - bool "Eicon.Diehl Diva cards" - help - This enables HiSax support for the Eicon.Diehl Diva none PRO - versions passive ISDN cards. - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using the different cards, a different D-channel protocol, or - non-standard IRQ/port settings. - -config HISAX_ASUSCOM - bool "ASUSCOM ISA cards" - depends on ISA - help - This enables HiSax support for the AsusCom and their OEM versions - passive ISDN ISA cards. - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using the different cards, a different D-channel protocol, or - non-standard IRQ/port settings. - -config HISAX_TELEINT - bool "TELEINT cards" - depends on ISA - help - This enables HiSax support for the TELEINT SA1 semiactiv ISDN card. - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using the different cards, a different D-channel protocol, or - non-standard IRQ/port settings. - -config HISAX_HFCS - bool "HFC-S based cards" - depends on ISA - help - This enables HiSax support for the HFC-S 2BDS0 based cards, like - teles 16.3c. - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using the different cards, a different D-channel protocol, or - non-standard IRQ/port settings. - -config HISAX_SEDLBAUER - bool "Sedlbauer cards" - help - This enables HiSax support for the Sedlbauer passive ISDN cards. - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using the different cards, a different D-channel protocol, or - non-standard IRQ/port settings. - -config HISAX_SPORTSTER - bool "USR Sportster internal TA" - depends on ISA - help - This enables HiSax support for the USR Sportster internal TA card. - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using a different D-channel protocol, or non-standard IRQ/port - settings. - -config HISAX_MIC - bool "MIC card" - depends on ISA - help - This enables HiSax support for the ITH MIC card. - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using a different D-channel protocol, or non-standard IRQ/port - settings. - -config HISAX_NETJET - bool "NETjet card" - depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE)) - depends on VIRT_TO_BUS - help - This enables HiSax support for the NetJet from Traverse - Technologies. - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using a different D-channel protocol, or non-standard IRQ/port - settings. - -config HISAX_NETJET_U - bool "NETspider U card" - depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE)) - depends on VIRT_TO_BUS - help - This enables HiSax support for the Netspider U interface ISDN card - from Traverse Technologies. - See <file:Documentation/isdn/README.HiSax> on how to configure it - using a different D-channel protocol, or non-standard IRQ/port - settings. - -config HISAX_NICCY - bool "Niccy PnP/PCI card" - help - This enables HiSax support for the Dr. Neuhaus Niccy PnP or PCI. - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using a different D-channel protocol, or non-standard IRQ/port - settings. - -config HISAX_ISURF - bool "Siemens I-Surf card" - depends on ISA - help - This enables HiSax support for the Siemens I-Talk/I-Surf card with - ISAR chip. - See <file:Documentation/isdn/README.HiSax> on how to configure it - using a different D-channel protocol, or non-standard IRQ/port - settings. - -config HISAX_HSTSAPHIR - bool "HST Saphir card" - depends on ISA - help - This enables HiSax support for the HST Saphir card. - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using a different D-channel protocol, or non-standard IRQ/port - settings. - -config HISAX_BKM_A4T - bool "Telekom A4T card" - depends on PCI - help - This enables HiSax support for the Telekom A4T card. - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using a different D-channel protocol, or non-standard IRQ/port - settings. - -config HISAX_SCT_QUADRO - bool "Scitel Quadro card" - depends on PCI - help - This enables HiSax support for the Scitel Quadro card. - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using a different D-channel protocol, or non-standard IRQ/port - settings. - -config HISAX_GAZEL - bool "Gazel cards" - help - This enables HiSax support for the Gazel cards. - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using a different D-channel protocol, or non-standard IRQ/port - settings. - -config HISAX_HFC_PCI - bool "HFC PCI-Bus cards" - depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN))) - help - This enables HiSax support for the HFC-S PCI 2BDS0 based cards. - - For more information see under - <file:Documentation/isdn/README.hfc-pci>. - -config HISAX_W6692 - bool "Winbond W6692 based cards" - depends on PCI - help - This enables HiSax support for Winbond W6692 based PCI ISDN cards. - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using a different D-channel protocol, or non-standard IRQ/port - settings. - -config HISAX_HFC_SX - bool "HFC-S+, HFC-SP, HFC-PCMCIA cards" - help - This enables HiSax support for the HFC-S+, HFC-SP and HFC-PCMCIA - cards. This code is not finished yet. - -config HISAX_ENTERNOW_PCI - bool "Formula-n enter:now PCI card" - depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN))) - help - This enables HiSax support for the Formula-n enter:now PCI - ISDN card. - -config HISAX_DEBUG - bool "HiSax debugging" - help - This enables debugging code in the new-style HiSax drivers, i.e. - the ST5481 USB driver currently. - If in doubt, say yes. - -comment "HiSax PCMCIA card service modules" - -config HISAX_SEDLBAUER_CS - tristate "Sedlbauer PCMCIA cards" - depends on PCMCIA && HISAX_SEDLBAUER - help - This enables the PCMCIA client driver for the Sedlbauer Speed Star - and Speed Star II cards. - -config HISAX_ELSA_CS - tristate "ELSA PCMCIA MicroLink cards" - depends on PCMCIA && HISAX_ELSA - help - This enables the PCMCIA client driver for the Elsa PCMCIA MicroLink - card. - -config HISAX_AVM_A1_CS - tristate "AVM A1 PCMCIA cards" - depends on PCMCIA && ISDN_DRV_HISAX - help - This enables the PCMCIA client driver for the AVM A1 / Fritz!Card - PCMCIA cards. - -config HISAX_TELES_CS - tristate "TELES PCMCIA cards" - depends on PCMCIA && HISAX_16_3 - help - This enables the PCMCIA client driver for the Teles PCMCIA cards. - -comment "HiSax sub driver modules" - -config HISAX_ST5481 - tristate "ST5481 USB ISDN modem" - depends on USB - select ISDN_HDLC - select CRC_CCITT - select BITREVERSE - help - This enables the driver for ST5481 based USB ISDN adapters, - e.g. the BeWan Gazel 128 USB - -config HISAX_HFCUSB - tristate "HFC USB based ISDN modems" - depends on USB - help - This enables the driver for HFC USB based ISDN modems. - -config HISAX_HFC4S8S - tristate "HFC-4S/8S based ISDN cards" - help - This enables the driver for HFC-4S/8S based ISDN cards. - -config HISAX_FRITZ_PCIPNP - tristate "AVM Fritz!Card PCI/PCIv2/PnP support" - depends on PCI - help - This enables the driver for the AVM Fritz!Card PCI, - Fritz!Card PCI v2 and Fritz!Card PnP. - (the latter also needs you to select "ISA Plug and Play support" - from the menu "Plug and Play configuration") - -endif - -endmenu - |