diff options
Diffstat (limited to 'drivers/isdn/hardware/mISDN/hfc_multi_8xx.h')
| -rw-r--r-- | drivers/isdn/hardware/mISDN/hfc_multi_8xx.h | 167 |
1 files changed, 167 insertions, 0 deletions
diff --git a/drivers/isdn/hardware/mISDN/hfc_multi_8xx.h b/drivers/isdn/hardware/mISDN/hfc_multi_8xx.h new file mode 100644 index 000000000000..45ddced956d5 --- /dev/null +++ b/drivers/isdn/hardware/mISDN/hfc_multi_8xx.h @@ -0,0 +1,167 @@ +/* + * For License see notice in hfc_multi.c + * + * special IO and init functions for the embedded XHFC board + * from Speech Design + * + */ + +#include <asm/8xx_immap.h> + +/* Change this to the value used by your board */ +#ifndef IMAP_ADDR +#define IMAP_ADDR 0xFFF00000 +#endif + +static void +#ifdef HFC_REGISTER_DEBUG +HFC_outb_embsd(struct hfc_multi *hc, u_char reg, u_char val, + const char *function, int line) +#else +HFC_outb_embsd(struct hfc_multi *hc, u_char reg, u_char val) +#endif +{ + hc->immap->im_ioport.iop_padat |= PA_XHFC_A0; + writeb(reg, hc->xhfc_memaddr); + hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0); + writeb(val, hc->xhfc_memdata); +} +static u_char +#ifdef HFC_REGISTER_DEBUG +HFC_inb_embsd(struct hfc_multi *hc, u_char reg, const char *function, int line) +#else +HFC_inb_embsd(struct hfc_multi *hc, u_char reg) +#endif +{ + hc->immap->im_ioport.iop_padat |= PA_XHFC_A0; + writeb(reg, hc->xhfc_memaddr); + hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0); + return readb(hc->xhfc_memdata); +} +static u_short +#ifdef HFC_REGISTER_DEBUG +HFC_inw_embsd(struct hfc_multi *hc, u_char reg, const char *function, int line) +#else +HFC_inw_embsd(struct hfc_multi *hc, u_char reg) +#endif +{ + hc->immap->im_ioport.iop_padat |= PA_XHFC_A0; + writeb(reg, hc->xhfc_memaddr); + hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0); + return readb(hc->xhfc_memdata); +} +static void +#ifdef HFC_REGISTER_DEBUG +HFC_wait_embsd(struct hfc_multi *hc, const char *function, int line) +#else +HFC_wait_embsd(struct hfc_multi *hc) +#endif +{ + hc->immap->im_ioport.iop_padat |= PA_XHFC_A0; + writeb(R_STATUS, hc->xhfc_memaddr); + hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0); + while (readb(hc->xhfc_memdata) & V_BUSY) + cpu_relax(); +} + +/* write fifo data (EMBSD) */ +void +write_fifo_embsd(struct hfc_multi *hc, u_char *data, int len) +{ + hc->immap->im_ioport.iop_padat |= PA_XHFC_A0; + *hc->xhfc_memaddr = A_FIFO_DATA0; + hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0); + while (len) { + *hc->xhfc_memdata = *data; + data++; + len--; + } +} + +/* read fifo data (EMBSD) */ +void +read_fifo_embsd(struct hfc_multi *hc, u_char *data, int len) +{ + hc->immap->im_ioport.iop_padat |= PA_XHFC_A0; + *hc->xhfc_memaddr = A_FIFO_DATA0; + hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0); + while (len) { + *data = (u_char)(*hc->xhfc_memdata); + data++; + len--; + } +} + +static int +setup_embedded(struct hfc_multi *hc, struct hm_map *m) +{ + printk(KERN_INFO + "HFC-multi: card manufacturer: '%s' card name: '%s' clock: %s\n", + m->vendor_name, m->card_name, m->clock2 ? "double" : "normal"); + + hc->pci_dev = NULL; + if (m->clock2) + test_and_set_bit(HFC_CHIP_CLOCK2, &hc->chip); + + hc->leds = m->leds; + hc->ledstate = 0xAFFEAFFE; + hc->opticalsupport = m->opticalsupport; + + hc->pci_iobase = 0; + hc->pci_membase = 0; + hc->xhfc_membase = NULL; + hc->xhfc_memaddr = NULL; + hc->xhfc_memdata = NULL; + + /* set memory access methods */ + if (m->io_mode) /* use mode from card config */ + hc->io_mode = m->io_mode; + switch (hc->io_mode) { + case HFC_IO_MODE_EMBSD: + test_and_set_bit(HFC_CHIP_EMBSD, &hc->chip); + hc->slots = 128; /* required */ + /* fall through */ + hc->HFC_outb = HFC_outb_embsd; + hc->HFC_inb = HFC_inb_embsd; + hc->HFC_inw = HFC_inw_embsd; + hc->HFC_wait = HFC_wait_embsd; + hc->read_fifo = read_fifo_embsd; + hc->write_fifo = write_fifo_embsd; + hc->xhfc_origmembase = XHFC_MEMBASE + XHFC_OFFSET * hc->id; + hc->xhfc_membase = (u_char *)ioremap(hc->xhfc_origmembase, + XHFC_MEMSIZE); + if (!hc->xhfc_membase) { + printk(KERN_WARNING + "HFC-multi: failed to remap xhfc address space. " + "(internal error)\n"); + return -EIO; + } + hc->xhfc_memaddr = (u_long *)(hc->xhfc_membase + 4); + hc->xhfc_memdata = (u_long *)(hc->xhfc_membase); + printk(KERN_INFO + "HFC-multi: xhfc_membase:%#lx xhfc_origmembase:%#lx " + "xhfc_memaddr:%#lx xhfc_memdata:%#lx\n", + (u_long)hc->xhfc_membase, hc->xhfc_origmembase, + (u_long)hc->xhfc_memaddr, (u_long)hc->xhfc_memdata); + break; + default: + printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n"); + return -EIO; + } + + /* Prepare the MPC8XX PortA 10 as output (address/data selector) */ + hc->immap = (struct immap *)(IMAP_ADDR); + hc->immap->im_ioport.iop_papar &= ~(PA_XHFC_A0); + hc->immap->im_ioport.iop_paodr &= ~(PA_XHFC_A0); + hc->immap->im_ioport.iop_padir |= PA_XHFC_A0; + + /* Prepare the MPC8xx PortB __X__ as input (ISDN__X__IRQ) */ + hc->pb_irqmsk = (PB_XHFC_IRQ1 << hc->id); + hc->immap->im_cpm.cp_pbpar &= ~(hc->pb_irqmsk); + hc->immap->im_cpm.cp_pbodr &= ~(hc->pb_irqmsk); + hc->immap->im_cpm.cp_pbdir &= ~(hc->pb_irqmsk); + + /* At this point the needed config is done */ + /* fifos are still not enabled */ + return 0; +} |