diff options
Diffstat (limited to 'drivers/input/touchscreen')
| -rw-r--r-- | drivers/input/touchscreen/Kconfig | 77 | ||||
| -rw-r--r-- | drivers/input/touchscreen/Makefile | 7 | ||||
| -rw-r--r-- | drivers/input/touchscreen/ad7879-i2c.c | 143 | ||||
| -rw-r--r-- | drivers/input/touchscreen/ad7879-spi.c | 198 | ||||
| -rw-r--r-- | drivers/input/touchscreen/ad7879.c | 625 | ||||
| -rw-r--r-- | drivers/input/touchscreen/ad7879.h | 30 | ||||
| -rw-r--r-- | drivers/input/touchscreen/ads7846.c | 206 | ||||
| -rw-r--r-- | drivers/input/touchscreen/cy8ctmg110_ts.c | 363 | ||||
| -rw-r--r-- | drivers/input/touchscreen/mcs5000_ts.c | 6 | ||||
| -rw-r--r-- | drivers/input/touchscreen/qt602240_ts.c | 1401 | ||||
| -rw-r--r-- | drivers/input/touchscreen/stmpe-ts.c | 397 | ||||
| -rw-r--r-- | drivers/input/touchscreen/tps6507x-ts.c | 3 | ||||
| -rw-r--r-- | drivers/input/touchscreen/usbtouchscreen.c | 215 |
13 files changed, 3093 insertions, 578 deletions
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 3b9d5e2105d7..0069d9703fda 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -55,37 +55,36 @@ config TOUCHSCREEN_AD7877 To compile this driver as a module, choose M here: the module will be called ad7877. -config TOUCHSCREEN_AD7879_I2C - tristate "AD7879 based touchscreens: AD7879-1 I2C Interface" - depends on I2C - select TOUCHSCREEN_AD7879 +config TOUCHSCREEN_AD7879 + tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface" help - Say Y here if you have a touchscreen interface using the - AD7879-1/AD7889-1 controller, and your board-specific - initialization code includes that in its table of I2C devices. + Say Y here if you want to support a touchscreen interface using + the AD7879-1/AD7889-1 controller. - If unsure, say N (but it's safe to say "Y"). + You should select a bus connection too. To compile this driver as a module, choose M here: the module will be called ad7879. +config TOUCHSCREEN_AD7879_I2C + tristate "support I2C bus connection" + depends on TOUCHSCREEN_AD7879 && I2C + help + Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus. + + To compile this driver as a module, choose M here: the + module will be called ad7879-i2c. + config TOUCHSCREEN_AD7879_SPI - tristate "AD7879 based touchscreens: AD7879 SPI Interface" - depends on SPI_MASTER && TOUCHSCREEN_AD7879_I2C = n - select TOUCHSCREEN_AD7879 + tristate "support SPI bus connection" + depends on TOUCHSCREEN_AD7879 && SPI_MASTER help - Say Y here if you have a touchscreen interface using the - AD7879/AD7889 controller, and your board-specific initialization - code includes that in its table of SPI devices. + Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus. If unsure, say N (but it's safe to say "Y"). To compile this driver as a module, choose M here: the - module will be called ad7879. - -config TOUCHSCREEN_AD7879 - tristate - default n + module will be called ad7879-spi. config TOUCHSCREEN_BITSY tristate "Compaq iPAQ H3600 (Bitsy) touchscreen" @@ -99,6 +98,20 @@ config TOUCHSCREEN_BITSY To compile this driver as a module, choose M here: the module will be called h3600_ts_input. +config TOUCHSCREEN_CY8CTMG110 + tristate "cy8ctmg110 touchscreen" + depends on I2C + depends on GPIOLIB + + help + Say Y here if you have a cy8ctmg110 capacitive touchscreen on + an AAVA device. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called cy8ctmg110_ts. + config TOUCHSCREEN_DA9034 tristate "Touchscreen support for Dialog Semiconductor DA9034" depends on PMIC_DA903X @@ -292,6 +305,18 @@ config TOUCHSCREEN_PENMOUNT To compile this driver as a module, choose M here: the module will be called penmount. +config TOUCHSCREEN_QT602240 + tristate "QT602240 I2C Touchscreen" + depends on I2C + help + Say Y here if you have the AT42QT602240/ATMXT224 I2C touchscreen + connected to your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called qt602240_ts. + config TOUCHSCREEN_MIGOR tristate "Renesas MIGO-R touchscreen" depends on SH_MIGOR && I2C @@ -540,9 +565,9 @@ config TOUCHSCREEN_USB_ZYTRONIC bool "Zytronic controller" if EMBEDDED depends on TOUCHSCREEN_USB_COMPOSITE -config TOUCHSCREEN_USB_ETT_TC5UH +config TOUCHSCREEN_USB_ETT_TC45USB default y - bool "ET&T TC5UH touchscreen controler support" if EMBEDDED + bool "ET&T USB series TC4UM/TC5UH touchscreen controler support" if EMBEDDED depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_NEXIO @@ -603,4 +628,14 @@ config TOUCHSCREEN_TPS6507X To compile this driver as a module, choose M here: the module will be called tps6507x_ts. +config TOUCHSCREEN_STMPE + tristate "STMicroelectronics STMPE touchscreens" + depends on MFD_STMPE + help + Say Y here if you want support for STMicroelectronics + STMPE touchscreen controllers. + + To compile this driver as a module, choose M here: the + module will be called stmpe-ts. + endif diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 497964a7a214..28217e1dcafd 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -9,9 +9,13 @@ wm97xx-ts-y := wm97xx-core.o obj-$(CONFIG_TOUCHSCREEN_88PM860X) += 88pm860x-ts.o obj-$(CONFIG_TOUCHSCREEN_AD7877) += ad7877.o obj-$(CONFIG_TOUCHSCREEN_AD7879) += ad7879.o +obj-$(CONFIG_TOUCHSCREEN_AD7879_I2C) += ad7879-i2c.o +obj-$(CONFIG_TOUCHSCREEN_AD7879_SPI) += ad7879-spi.o obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o +obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110) += cy8ctmg110_ts.o +obj-$(CONFIG_TOUCHSCREEN_DA9034) += da9034-ts.o obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE) += hampshire.o obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o @@ -30,7 +34,9 @@ obj-$(CONFIG_TOUCHSCREEN_HTCPEN) += htcpen.o obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE) += usbtouchscreen.o obj-$(CONFIG_TOUCHSCREEN_PCAP) += pcap_ts.o obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o +obj-$(CONFIG_TOUCHSCREEN_QT602240) += qt602240_ts.o obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o +obj-$(CONFIG_TOUCHSCREEN_STMPE) += stmpe-ts.o obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o @@ -38,7 +44,6 @@ obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.o obj-$(CONFIG_TOUCHSCREEN_WM97XX) += wm97xx-ts.o -obj-$(CONFIG_TOUCHSCREEN_DA9034) += da9034-ts.o wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705) += wm9705.o wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712) += wm9712.o wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713) += wm9713.o diff --git a/drivers/input/touchscreen/ad7879-i2c.c b/drivers/input/touchscreen/ad7879-i2c.c new file mode 100644 index 000000000000..d82a38ee9a3e --- /dev/null +++ b/drivers/input/touchscreen/ad7879-i2c.c @@ -0,0 +1,143 @@ +/* + * AD7879-1/AD7889-1 touchscreen (I2C bus) + * + * Copyright (C) 2008-2010 Michael Hennerich, Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/input.h> /* BUS_I2C */ +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/types.h> + +#include "ad7879.h" + +#define AD7879_DEVID 0x79 /* AD7879-1/AD7889-1 */ + +#ifdef CONFIG_PM +static int ad7879_i2c_suspend(struct i2c_client *client, pm_message_t message) +{ + struct ad7879 *ts = i2c_get_clientdata(client); + + ad7879_suspend(ts); + + return 0; +} + +static int ad7879_i2c_resume(struct i2c_client *client) +{ + struct ad7879 *ts = i2c_get_clientdata(client); + + ad7879_resume(ts); + + return 0; +} +#else +# define ad7879_i2c_suspend NULL +# define ad7879_i2c_resume NULL +#endif + +/* All registers are word-sized. + * AD7879 uses a high-byte first convention. + */ +static int ad7879_i2c_read(struct device *dev, u8 reg) +{ + struct i2c_client *client = to_i2c_client(dev); + + return swab16(i2c_smbus_read_word_data(client, reg)); +} + +static int ad7879_i2c_multi_read(struct device *dev, + u8 first_reg, u8 count, u16 *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + u8 idx; + + i2c_smbus_read_i2c_block_data(client, first_reg, count * 2, (u8 *)buf); + + for (idx = 0; idx < count; ++idx) + buf[idx] = swab16(buf[idx]); + + return 0; +} + +static int ad7879_i2c_write(struct device *dev, u8 reg, u16 val) +{ + struct i2c_client *client = to_i2c_client(dev); + + return i2c_smbus_write_word_data(client, reg, swab16(val)); +} + +static const struct ad7879_bus_ops ad7879_i2c_bus_ops = { + .bustype = BUS_I2C, + .read = ad7879_i2c_read, + .multi_read = ad7879_i2c_multi_read, + .write = ad7879_i2c_write, +}; + +static int __devinit ad7879_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ad7879 *ts; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WORD_DATA)) { + dev_err(&client->dev, "SMBUS Word Data not Supported\n"); + return -EIO; + } + + ts = ad7879_probe(&client->dev, AD7879_DEVID, client->irq, + &ad7879_i2c_bus_ops); + if (IS_ERR(ts)) + return PTR_ERR(ts); + + i2c_set_clientdata(client, ts); + + return 0; +} + +static int __devexit ad7879_i2c_remove(struct i2c_client *client) +{ + struct ad7879 *ts = i2c_get_clientdata(client); + + ad7879_remove(ts); + + return 0; +} + +static const struct i2c_device_id ad7879_id[] = { + { "ad7879", 0 }, + { "ad7889", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ad7879_id); + +static struct i2c_driver ad7879_i2c_driver = { + .driver = { + .name = "ad7879", + .owner = THIS_MODULE, + }, + .probe = ad7879_i2c_probe, + .remove = __devexit_p(ad7879_i2c_remove), + .suspend = ad7879_i2c_suspend, + .resume = ad7879_i2c_resume, + .id_table = ad7879_id, +}; + +static int __init ad7879_i2c_init(void) +{ + return i2c_add_driver(&ad7879_i2c_driver); +} +module_init(ad7879_i2c_init); + +static void __exit ad7879_i2c_exit(void) +{ + i2c_del_driver(&ad7879_i2c_driver); +} +module_exit(ad7879_i2c_exit); + +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); +MODULE_DESCRIPTION("AD7879(-1) touchscreen I2C bus driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("i2c:ad7879"); diff --git a/drivers/input/touchscreen/ad7879-spi.c b/drivers/input/touchscreen/ad7879-spi.c new file mode 100644 index 000000000000..59c6e68c4325 --- /dev/null +++ b/drivers/input/touchscreen/ad7879-spi.c @@ -0,0 +1,198 @@ +/* + * AD7879/AD7889 touchscreen (SPI bus) + * + * Copyright (C) 2008-2010 Michael Hennerich, Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/input.h> /* BUS_SPI */ +#include <linux/spi/spi.h> + +#include "ad7879.h" + +#define AD7879_DEVID 0x7A /* AD7879/AD7889 */ + +#define MAX_SPI_FREQ_HZ 5000000 +#define AD7879_CMD_MAGIC 0xE000 +#define AD7879_CMD_READ (1 << 10) +#define AD7879_CMD(reg) (AD7879_CMD_MAGIC | ((reg) & 0xF)) +#define AD7879_WRITECMD(reg) (AD7879_CMD(reg)) +#define AD7879_READCMD(reg) (AD7879_CMD(reg) | AD7879_CMD_READ) + +#ifdef CONFIG_PM +static int ad7879_spi_suspend(struct spi_device *spi, pm_message_t message) +{ + struct ad7879 *ts = spi_get_drvdata(spi); + + ad7879_suspend(ts); + + return 0; +} + +static int ad7879_spi_resume(struct spi_device *spi) +{ + struct ad7879 *ts = spi_get_drvdata(spi); + + ad7879_resume(ts); + + return 0; +} +#else +# define ad7879_spi_suspend NULL +# define ad7879_spi_resume NULL +#endif + +/* + * ad7879_read/write are only used for initial setup and for sysfs controls. + * The main traffic is done in ad7879_collect(). + */ + +static int ad7879_spi_xfer(struct spi_device *spi, + u16 cmd, u8 count, u16 *tx_buf, u16 *rx_buf) +{ + struct spi_message msg; + struct spi_transfer *xfers; + void *spi_data; + u16 *command; + u16 *_rx_buf = _rx_buf; /* shut gcc up */ + u8 idx; + int ret; + + xfers = spi_data = kzalloc(sizeof(*xfers) * (count + 2), GFP_KERNEL); + if (!spi_data) + return -ENOMEM; + + spi_message_init(&msg); + + command = spi_data; + command[0] = cmd; + if (count == 1) { + /* ad7879_spi_{read,write} gave us buf on stack */ + command[1] = *tx_buf; + tx_buf = &command[1]; + _rx_buf = rx_buf; + rx_buf = &command[2]; + } + + ++xfers; + xfers[0].tx_buf = command; + xfers[0].len = 2; + spi_message_add_tail(&xfers[0], &msg); + ++xfers; + + for (idx = 0; idx < count; ++idx) { + if (rx_buf) + xfers[idx].rx_buf = &rx_buf[idx]; + if (tx_buf) + xfers[idx].tx_buf = &tx_buf[idx]; + xfers[idx].len = 2; + spi_message_add_tail(&xfers[idx], &msg); + } + + ret = spi_sync(spi, &msg); + + if (count == 1) + _rx_buf[0] = command[2]; + + kfree(spi_data); + + return ret; +} + +static int ad7879_spi_multi_read(struct device *dev, + u8 first_reg, u8 count, u16 *buf) +{ + struct spi_device *spi = to_spi_device(dev); + + return ad7879_spi_xfer(spi, AD7879_READCMD(first_reg), count, NULL, buf); +} + +static int ad7879_spi_read(struct device *dev, u8 reg) +{ + struct spi_device *spi = to_spi_device(dev); + u16 ret, dummy; + + return ad7879_spi_xfer(spi, AD7879_READCMD(reg), 1, &dummy, &ret) ? : ret; +} + +static int ad7879_spi_write(struct device *dev, u8 reg, u16 val) +{ + struct spi_device *spi = to_spi_device(dev); + u16 dummy; + + return ad7879_spi_xfer(spi, AD7879_WRITECMD(reg), 1, &val, &dummy); +} + +static const struct ad7879_bus_ops ad7879_spi_bus_ops = { + .bustype = BUS_SPI, + .read = ad7879_spi_read, + .multi_read = ad7879_spi_multi_read, + .write = ad7879_spi_write, +}; + +static int __devinit ad7879_spi_probe(struct spi_device *spi) +{ + struct ad7879 *ts; + int err; + + /* don't exceed max specified SPI CLK frequency */ + if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) { + dev_err(&spi->dev, "SPI CLK %d Hz?\n", spi->max_speed_hz); + return -EINVAL; + } + + spi->bits_per_word = 16; + err = spi_setup(spi); + if (err) { + dev_dbg(&spi->dev, "spi master doesn't support 16 bits/word\n"); + return err; + } + + ts = ad7879_probe(&spi->dev, AD7879_DEVID, spi->irq, &ad7879_spi_bus_ops); + if (IS_ERR(ts)) + return PTR_ERR(ts); + + spi_set_drvdata(spi, ts); + + return 0; +} + +static int __devexit ad7879_spi_remove(struct spi_device *spi) +{ + struct ad7879 *ts = spi_get_drvdata(spi); + + ad7879_remove(ts); + spi_set_drvdata(spi, NULL); + + return 0; +} + +static struct spi_driver ad7879_spi_driver = { + .driver = { + .name = "ad7879", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = ad7879_spi_probe, + .remove = __devexit_p(ad7879_spi_remove), + .suspend = ad7879_spi_suspend, + .resume = ad7879_spi_resume, +}; + +static int __init ad7879_spi_init(void) +{ + return spi_register_driver(&ad7879_spi_driver); +} +module_init(ad7879_spi_init); + +static void __exit ad7879_spi_exit(void) +{ + spi_unregister_driver(&ad7879_spi_driver); +} +module_exit(ad7879_spi_exit); + +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); +MODULE_DESCRIPTION("AD7879(-1) touchscreen SPI bus driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("spi:ad7879"); diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c index 4b32fb4704cd..ba6f0bd1e762 100644 --- a/drivers/input/touchscreen/ad7879.c +++ b/drivers/input/touchscreen/ad7879.c @@ -1,25 +1,9 @@ /* - * Copyright (C) 2008-2009 Michael Hennerich, Analog Devices Inc. + * AD7879/AD7889 based touchscreen and GPIO driver * - * Description: AD7879/AD7889 based touchscreen, and GPIO driver - * (I2C/SPI Interface) + * Copyright (C) 2008-2010 Michael Hennerich, Analog Devices Inc. * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. * * History: * Copyright (c) 2005 David Brownell @@ -44,12 +28,12 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/slab.h> -#include <linux/workqueue.h> #include <linux/spi/spi.h> #include <linux/i2c.h> #include <linux/gpio.h> #include <linux/spi/ad7879.h> +#include "ad7879.h" #define AD7879_REG_ZEROS 0 #define AD7879_REG_CTRL1 1 @@ -120,30 +104,19 @@ enum { #define MAX_12BIT ((1<<12)-1) #define TS_PEN_UP_TIMEOUT msecs_to_jiffies(50) -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) -#define AD7879_DEVID 0x7A -typedef struct spi_device bus_device; -#elif defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE) -#define AD7879_DEVID 0x79 -typedef struct i2c_client bus_device; -#endif - struct ad7879 { - bus_device *bus; + const struct ad7879_bus_ops *bops; + + struct device *dev; struct input_dev *input; - struct work_struct work; struct timer_list timer; #ifdef CONFIG_GPIOLIB struct gpio_chip gc; -#endif struct mutex mutex; - unsigned disabled:1; /* P: mutex */ - -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) - struct spi_message msg; - struct spi_transfer xfer[AD7879_NR_SENSE + 1]; - u16 cmd; #endif + unsigned int irq; + bool disabled; /* P: input->mutex */ + bool suspended; /* P: input->mutex */ u16 conversion_data[AD7879_NR_SENSE]; char phys[32]; u8 first_conversion_delay; @@ -158,11 +131,22 @@ struct ad7879 { u16 cmd_crtl3; }; -static int ad7879_read(bus_device *, u8); -static int ad7879_write(bus_device *, u8, u16); -static void ad7879_collect(struct ad7879 *); +static int ad7879_read(struct ad7879 *ts, u8 reg) +{ + return ts->bops->read(ts->dev, reg); +} + +static int ad7879_multi_read(struct ad7879 *ts, u8 first_reg, u8 count, u16 *buf) +{ + return ts->bops->multi_read(ts->dev, first_reg, count, buf); +} -static void ad7879_report(struct ad7879 *ts) +static int ad7879_write(struct ad7879 *ts, u8 reg, u16 val) +{ + return ts->bops->write(ts->dev, reg, val); +} + +static int ad7879_report(struct ad7879 *ts) { struct input_dev *input_dev = ts->input; unsigned Rt; @@ -175,12 +159,14 @@ static void ad7879_report(struct ad7879 *ts) /* * The samples processed here are already preprocessed by the AD7879. - * The preprocessing function consists of a median and an averaging filter. - * The combination of these two techniques provides a robust solution, - * discarding the spurious noise in the signal and keeping only the data of interest. - * The size of both filters is programmable. (dev.platform_data, see linux/spi/ad7879.h) - * Other user-programmable conversion controls include variable acquisition time, - * and first conversion delay. Up to 16 averages can be taken per conversion. + * The preprocessing function consists of a median and an averaging + * filter. The combination of these two techniques provides a robust + * solution, discarding the spurious noise in the signal and keeping + * only the data of interest. The size of both filters is + * programmable. (dev.platform_data, see linux/spi/ad7879.h) Other + * user-programmable conversion controls include variable acquisition + * time, and first conversion delay. Up to 16 averages can be taken + * per conversion. */ if (likely(x && z1)) { @@ -189,21 +175,17 @@ static void ad7879_report(struct ad7879 *ts) Rt /= z1; Rt = (Rt + 2047) >> 12; + if (!timer_pending(&ts->timer)) + input_report_key(input_dev, BTN_TOUCH, 1); + input_report_abs(input_dev, ABS_X, x); input_report_abs(input_dev, ABS_Y, y); input_report_abs(input_dev, ABS_PRESSURE, Rt); input_sync(input_dev); + return 0; } -} - -static void ad7879_work(struct work_struct *work) -{ - struct ad7879 *ts = container_of(work, struct ad7879, work); - /* use keventd context to read the result registers */ - ad7879_collect(ts); - ad7879_report(ts); - mod_timer(&ts->timer, jiffies + TS_PEN_UP_TIMEOUT); + return -EINVAL; } static void ad7879_ts_event_release(struct ad7879 *ts) @@ -211,6 +193,7 @@ static void ad7879_ts_event_release(struct ad7879 *ts) struct input_dev *input_dev = ts->input; input_report_abs(input_dev, ABS_PRESSURE, 0); + input_report_key(input_dev, BTN_TOUCH, 0); input_sync(input_dev); } @@ -225,56 +208,98 @@ static irqreturn_t ad7879_irq(int irq, void *handle) { struct ad7879 *ts = handle; - /* The repeated conversion sequencer controlled by TMR kicked off too fast. - * We ignore the last and process the sample sequence currently in the queue. - * It can't be older than 9.4ms - */ + ad7879_multi_read(ts, AD7879_REG_XPLUS, AD7879_NR_SENSE, ts->conversion_data); - if (!work_pending(&ts->work)) - schedule_work(&ts->work); + if (!ad7879_report(ts)) + mod_timer(&ts->timer, jiffies + TS_PEN_UP_TIMEOUT); return IRQ_HANDLED; } -static void ad7879_setup(struct ad7879 *ts) +static void __ad7879_enable(struct ad7879 *ts) { - ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2); - ad7879_write(ts->bus, AD7879_REG_CTRL3, ts->cmd_crtl3); - ad7879_write(ts->bus, AD7879_REG_CTRL1, ts->cmd_crtl1); + ad7879_write(ts, AD7879_REG_CTRL2, ts->cmd_crtl2); + ad7879_write(ts, AD7879_REG_CTRL3, ts->cmd_crtl3); + ad7879_write(ts, AD7879_REG_CTRL1, ts->cmd_crtl1); + + enable_irq(ts->irq); } -static void ad7879_disable(struct ad7879 *ts) +static void __ad7879_disable(struct ad7879 *ts) { - mutex_lock(&ts->mutex); + disable_irq(ts->irq); + + if (del_timer_sync(&ts->timer)) + ad7879_ts_event_release(ts); + + ad7879_write(ts, AD7879_REG_CTRL2, AD7879_PM(AD7879_PM_SHUTDOWN)); +} - if (!ts->disabled) { - ts->disabled = 1; - disable_irq(ts->bus->irq); +static int ad7879_open(struct input_dev *input) +{ + struct ad7879 *ts = input_get_drvdata(input); - cancel_work_sync(&ts->work); + /* protected by input->mutex */ + if (!ts->disabled && !ts->suspended) + __ad7879_enable(ts); - if (del_timer_sync(&ts->timer)) - ad7879_ts_event_release(ts); + return 0; +} - ad7879_write(ts->bus, AD7879_REG_CTRL2, - AD7879_PM(AD7879_PM_SHUTDOWN)); - } +static void ad7879_close(struct input_dev* input) +{ + struct ad7879 *ts = input_get_drvdata(input); - mutex_unlock(&ts->mutex); + /* protected by input->mutex */ + if (!ts->disabled && !ts->suspended) + __ad7879_disable(ts); } -static void ad7879_enable(struct ad7879 *ts) +void ad7879_suspend(struct ad7879 *ts) { - mutex_lock(&ts->mutex); + mutex_lock(&ts->input->mutex); + + if (!ts->suspended && !ts->disabled && ts->input->users) + __ad7879_disable(ts); + + ts->suspended = true; - if (ts->disabled) { - ad7879_setup(ts); - ts->disabled = 0; - enable_irq(ts->bus->irq); + mutex_unlock(&ts->input->mutex); +} +EXPORT_SYMBOL(ad7879_suspend); + +void ad7879_resume(struct ad7879 *ts) +{ + mutex_lock(&ts->input->mutex); + + if (ts->suspended && !ts->disabled && ts->input->users) + __ad7879_enable(ts); + + ts->suspended = false; + + mutex_unlock(&ts->input->mutex); +} +EXPORT_SYMBOL(ad7879_resume); + +static void ad7879_toggle(struct ad7879 *ts, bool disable) +{ + mutex_lock(&ts->input->mutex); + + if (!ts->suspended && ts->input->users != 0) { + + if (disable) { + if (ts->disabled) + __ad7879_enable(ts); + } else { + if (!ts->disabled) + __ad7879_disable(ts); + } } - mutex_unlock(&ts->mutex); + ts->disabled = disable; + + mutex_unlock(&ts->input->mutex); } static ssize_t ad7879_disable_show(struct device *dev, @@ -297,10 +322,7 @@ static ssize_t ad7879_disable_store(struct device *dev, if (error) return error; - if (val) - ad7879_disable(ts); - else - ad7879_enable(ts); + ad7879_toggle(ts, val); return count; } @@ -325,7 +347,7 @@ static int ad7879_gpio_direction_input(struct gpio_chip *chip, mutex_lock(&ts->mutex); ts->cmd_crtl2 |= AD7879_GPIO_EN | AD7879_GPIODIR | AD7879_GPIOPOL; - err = ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2); + err = ad7879_write(ts, AD7879_REG_CTRL2, ts->cmd_crtl2); mutex_unlock(&ts->mutex); return err; @@ -345,7 +367,7 @@ static int ad7879_gpio_direction_output(struct gpio_chip *chip, else ts->cmd_crtl2 &= ~AD7879_GPIO_DATA; - err = ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2); + err = ad7879_write(ts, AD7879_REG_CTRL2, ts->cmd_crtl2); mutex_unlock(&ts->mutex); return err; @@ -357,7 +379,7 @@ static int ad7879_gpio_get_value(struct gpio_chip *chip, unsigned gpio) u16 val; mutex_lock(&ts->mutex); - val = ad7879_read(ts->bus, AD7879_REG_CTRL2); + val = ad7879_read(ts, AD7879_REG_CTRL2); mutex_unlock(&ts->mutex); return !!(val & AD7879_GPIO_DATA); @@ -374,16 +396,17 @@ static void ad7879_gpio_set_value(struct gpio_chip *chip, else ts->cmd_crtl2 &= ~AD7879_GPIO_DATA; - ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2); + ad7879_write(ts, AD7879_REG_CTRL2, ts->cmd_crtl2); mutex_unlock(&ts->mutex); } -static int __devinit ad7879_gpio_add(struct device *dev) +static int ad7879_gpio_add(struct ad7879 *ts, + const struct ad7879_platform_data *pdata) { - struct ad7879 *ts = dev_get_drvdata(dev); - struct ad7879_platform_data *pdata = dev->platform_data; int ret = 0; + mutex_init(&ts->mutex); + if (pdata->gpio_export) { ts->gc.direction_input = ad7879_gpio_direction_input; ts->gc.direction_output = ad7879_gpio_direction_output; @@ -394,72 +417,75 @@ static int __devinit ad7879_gpio_add(struct device *dev) ts->gc.ngpio = 1; ts->gc.label = "AD7879-GPIO"; ts->gc.owner = THIS_MODULE; - ts->gc.dev = dev; + ts->gc.dev = ts->dev; ret = gpiochip_add(&ts->gc); if (ret) - dev_err(dev, "failed to register gpio %d\n", + dev_err(ts->dev, "failed to register gpio %d\n", ts->gc.base); } return ret; } -/* - * We mark ad7879_gpio_remove inline so there is a chance the code - * gets discarded when not needed. We can't do __devinit/__devexit - * markup since it is used in both probe and remove methods. - */ -static inline void ad7879_gpio_remove(struct device *dev) +static void ad7879_gpio_remove(struct ad7879 *ts) { - struct ad7879 *ts = dev_get_drvdata(dev); - struct ad7879_platform_data *pdata = dev->platform_data; + const struct ad7879_platform_data *pdata = ts->dev->platform_data; int ret; if (pdata->gpio_export) { ret = gpiochip_remove(&ts->gc); if (ret) - dev_err(dev, "failed to remove gpio %d\n", + dev_err(ts->dev, "failed to remove gpio %d\n", ts->gc.base); } } #else -static inline int ad7879_gpio_add(struct device *dev) +static inline int ad7879_gpio_add(struct ad7879 *ts, + const struct ad7879_platform_data *pdata) { return 0; } -static inline void ad7879_gpio_remove(struct device *dev) +static inline void ad7879_gpio_remove(struct ad7879 *ts) { } #endif -static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) +struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq, + const struct ad7879_bus_ops *bops) { + struct ad7879_platform_data *pdata = dev->platform_data; + struct ad7879 *ts; struct input_dev *input_dev; - struct ad7879_platform_data *pdata = bus->dev.platform_data; int err; u16 revid; - if (!bus->irq) { - dev_err(&bus->dev, "no IRQ?\n"); - return -ENODEV; + if (!irq) { + dev_err(dev, "no IRQ?\n"); + err = -EINVAL; + goto err_out; } if (!pdata) { - dev_err(&bus->dev, "no platform data?\n"); - return -ENODEV; + dev_err(dev, "no platform data?\n"); + err = -EINVAL; + goto err_out; } + ts = kzalloc(sizeof(*ts), GFP_KERNEL); input_dev = input_allocate_device(); - if (!input_dev) - return -ENOMEM; + if (!ts || !input_dev) { + err = -ENOMEM; + goto err_free_mem; + } + ts->bops = bops; + ts->dev = dev; ts->input = input_dev; + ts->irq = irq; setup_timer(&ts->timer, ad7879_timer, (unsigned long) ts); - INIT_WORK(&ts->work, ad7879_work); - mutex_init(&ts->mutex); ts->x_plate_ohms = pdata->x_plate_ohms ? : 400; ts->pressure_max = pdata->pressure_max ? : ~0; @@ -470,17 +496,26 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) ts->pen_down_acc_interval = pdata->pen_down_acc_interval; ts->median = pdata->median; - snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&bus->dev)); + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev)); input_dev->name = "AD7879 Touchscreen"; input_dev->phys = ts->phys; - input_dev->dev.parent = &bus->dev; + input_dev->dev.parent = dev; + input_dev->id.bustype = bops->bustype; + + input_dev->open = ad7879_open; + input_dev->close = ad7879_close; + + input_set_drvdata(input_dev, ts); __set_bit(EV_ABS, input_dev->evbit); __set_bit(ABS_X, input_dev->absbit); __set_bit(ABS_Y, input_dev->absbit); __set_bit(ABS_PRESSURE, input_dev->absbit); + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(BTN_TOUCH, input_dev->keybit); + input_set_abs_params(input_dev, ABS_X, pdata->x_min ? : 0, pdata->x_max ? : MAX_12BIT, @@ -492,17 +527,18 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) input_set_abs_params(input_dev, ABS_PRESSURE, pdata->pressure_min, pdata->pressure_max, 0, 0); - err = ad7879_write(bus, AD7879_REG_CTRL2, AD7879_RESET); - + err = ad7879_write(ts, AD7879_REG_CTRL2, AD7879_RESET); if (err < 0) { - dev_err(&bus->dev, "Failed to write %s\n", input_dev->name); + dev_err(dev, "Failed to write %s\n", input_dev->name); goto err_free_mem; } - revid = ad7879_read(bus, AD7879_REG_REVID); - - if ((revid & 0xFF) != AD7879_DEVID) { - dev_err(&bus->dev, "Failed to probe %s\n", input_dev->name); + revid = ad7879_read(ts, AD7879_REG_REVID); + input_dev->id.product = (revid & 0xff); + input_dev->id.version = revid >> 8; + if (input_dev->id.product != devid) { + dev_err(dev, "Failed to probe %s (%x vs %x)\n", + input_dev->name, devid, revid); err = -ENODEV; goto err_free_mem; } @@ -524,21 +560,21 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) AD7879_ACQ(ts->acquisition_time) | AD7879_TMR(ts->pen_down_acc_interval); - ad7879_setup(ts); - - err = request_irq(bus->irq, ad7879_irq, - IRQF_TRIGGER_FALLING, bus->dev.driver->name, ts); - + err = request_threaded_irq(ts->irq, NULL, ad7879_irq, + IRQF_TRIGGER_FALLING, + dev_name(dev), ts); if (err) { - dev_err(&bus->dev, "irq %d busy?\n", bus->irq); + dev_err(dev, "irq %d busy?\n", ts->irq); goto err_free_mem; } - err = sysfs_create_group(&bus->dev.kobj, &ad7879_attr_group); + __ad7879_disable(ts); + + err = sysfs_create_group(&dev->kobj, &ad7879_attr_group); if (err) goto err_free_irq; - err = ad7879_gpio_add(&bus->dev); + err = ad7879_gpio_add(ts, pdata); if (err) goto err_remove_attr; @@ -546,321 +582,32 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) if (err) goto err_remove_gpio; - dev_info(&bus->dev, "Rev.%d touchscreen, irq %d\n", - revid >> 8, bus->irq); - - return 0; + return ts; err_remove_gpio: - ad7879_gpio_remove(&bus->dev); + ad7879_gpio_remove(ts); err_remove_attr: - sysfs_remove_group(&bus->dev.kobj, &ad7879_attr_group); + sysfs_remove_group(&dev->kobj, &ad7879_attr_group); err_free_irq: - free_irq(bus->irq, ts); + free_irq(ts->irq, ts); err_free_mem: input_free_device(input_dev); - - return err; -} - -static int __devexit ad7879_destroy(bus_device *bus, struct ad7879 *ts) -{ - ad7879_gpio_remove(&bus->dev); - ad7879_disable(ts); - sysfs_remove_group(&ts->bus->dev.kobj, &ad7879_attr_group); - free_irq(ts->bus->irq, ts); - input_unregister_device(ts->input); - dev_dbg(&bus->dev, "unregistered touchscreen\n"); - - return 0; -} - -#ifdef CONFIG_PM -static int ad7879_suspend(bus_device *bus, pm_message_t message) -{ - struct ad7879 *ts = dev_get_drvdata(&bus->dev); - - ad7879_disable(ts); - - return 0; -} - -static int ad7879_resume(bus_device *bus) -{ - struct ad7879 *ts = dev_get_drvdata(&bus->dev); - - ad7879_enable(ts); - - return 0; -} -#else -#define ad7879_suspend NULL -#define ad7879_resume NULL -#endif - -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) -#define MAX_SPI_FREQ_HZ 5000000 -#define AD7879_CMD_MAGIC 0xE000 -#define AD7879_CMD_READ (1 << 10) -#define AD7879_WRITECMD(reg) (AD7879_CMD_MAGIC | (reg & 0xF)) -#define AD7879_READCMD(reg) (AD7879_CMD_MAGIC | AD7879_CMD_READ | (reg & 0xF)) - -struct ser_req { - u16 command; - u16 data; - struct spi_message msg; - struct spi_transfer xfer[2]; -}; - -/* - * ad7879_read/write are only used for initial setup and for sysfs controls. - * The main traffic is done in ad7879_collect(). - */ - -static int ad7879_read(struct spi_device *spi, u8 reg) -{ - struct ser_req *req; - int status, ret; - - req = kzalloc(sizeof *req, GFP_KERNEL); - if (!req) - return -ENOMEM; - - spi_message_init(&req->msg); - - req->command = (u16) AD7879_READCMD(reg); - req->xfer[0].tx_buf = &req->command; - req->xfer[0].len = 2; - - req->xfer[1].rx_buf = &req->data; - req->xfer[1].len = 2; - - spi_message_add_tail(&req->xfer[0], &req->msg); - spi_message_add_tail(&req->xfer[1], &req->msg); - - status = spi_sync(spi, &req->msg); - ret = status ? : req->data; - - kfree(req); - - return ret; -} - -static int ad7879_write(struct spi_device *spi, u8 reg, u16 val) -{ - struct ser_req *req; - int status; - - req = kzalloc(sizeof *req, GFP_KERNEL); - if (!req) - return -ENOMEM; - - spi_message_init(&req->msg); - - req->command = (u16) AD7879_WRITECMD(reg); - req->xfer[0].tx_buf = &req->command; - req->xfer[0].len = 2; - - req->data = val; - req->xfer[1].tx_buf = &req->data; - req->xfer[1].len = 2; - - spi_message_add_tail(&req->xfer[0], &req->msg); - spi_message_add_tail(&req->xfer[1], &req->msg); - - status = spi_sync(spi, &req->msg); - - kfree(req); - - return status; -} - -static void ad7879_collect(struct ad7879 *ts) -{ - int status = spi_sync(ts->bus, &ts->msg); - - if (status) - dev_err(&ts->bus->dev, "spi_sync --> %d\n", status); -} - -static void ad7879_setup_ts_def_msg(struct ad7879 *ts) -{ - struct spi_message *m; - int i; - - ts->cmd = (u16) AD7879_READCMD(AD7879_REG_XPLUS); - - m = &ts->msg; - spi_message_init(m); - ts->xfer[0].tx_buf = &ts->cmd; - ts->xfer[0].len = 2; - - spi_message_add_tail(&ts->xfer[0], m); - - for (i = 0; i < AD7879_NR_SENSE; i++) { - ts->xfer[i + 1].rx_buf = &ts->conversion_data[i]; - ts->xfer[i + 1].len = 2; - spi_message_add_tail(&ts->xfer[i + 1], m); - } -} - -static int __devinit ad7879_probe(struct spi_device *spi) -{ - struct ad7879 *ts; - int error; - - /* don't exceed max specified SPI CLK frequency */ - if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) { - dev_err(&spi->dev, "SPI CLK %d Hz?\n", spi->max_speed_hz); - return -EINVAL; - } - - ts = kzalloc(sizeof(struct ad7879), GFP_KERNEL); - if (!ts) - return -ENOMEM; - - dev_set_drvdata(&spi->dev, ts); - ts->bus = spi; - - ad7879_setup_ts_def_msg(ts); - - error = ad7879_construct(spi, ts); - if (error) { - dev_set_drvdata(&spi->dev, NULL); - kfree(ts); - } - - return error; -} - -static int __devexit ad7879_remove(struct spi_device *spi) -{ - struct ad7879 *ts = dev_get_drvdata(&spi->dev); - - ad7879_destroy(spi, ts); - dev_set_drvdata(&spi->dev, NULL); kfree(ts); - - return 0; +err_out: + return ERR_PTR(err); } +EXPORT_SYMBOL(ad7879_probe); -static struct spi_driver ad7879_driver = { - .driver = { - .name = "ad7879", - .bus = &spi_bus_type, - .owner = THIS_MODULE, - }, - .probe = ad7879_probe, - .remove = __devexit_p(ad7879_remove), - .suspend = ad7879_suspend, - .resume = ad7879_resume, -}; - -static int __init ad7879_init(void) -{ - return spi_register_driver(&ad7879_driver); -} -module_init(ad7879_init); - -static void __exit ad7879_exit(void) -{ - spi_unregister_driver(&ad7879_driver); -} -module_exit(ad7879_exit); - -#elif defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE) - -/* All registers are word-sized. - * AD7879 uses a high-byte first convention. - */ -static int ad7879_read(struct i2c_client *client, u8 reg) +void ad7879_remove(struct ad7879 *ts) { - return swab16(i2c_smbus_read_word_data(client, reg)); -} - -static int ad7879_write(struct i2c_client *client, u8 reg, u16 val) -{ - return i2c_smbus_write_word_data(client, reg, swab16(val)); -} - -static void ad7879_collect(struct ad7879 *ts) -{ - int i; - - for (i = 0; i < AD7879_NR_SENSE; i++) - ts->conversion_data[i] = ad7879_read(ts->bus, - AD7879_REG_XPLUS + i); -} - -static int __devinit ad7879_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct ad7879 *ts; - int error; - - if (!i2c_check_functionality(client->adapter, - I2C_FUNC_SMBUS_WORD_DATA)) { - dev_err(&client->dev, "SMBUS Word Data not Supported\n"); - return -EIO; - } - - ts = kzalloc(sizeof(struct ad7879), GFP_KERNEL); - if (!ts) - return -ENOMEM; - - i2c_set_clientdata(client, ts); - ts->bus = client; - - error = ad7879_construct(client, ts); - if (error) - kfree(ts); - - return error; -} - -static int __devexit ad7879_remove(struct i2c_client *client) -{ - struct ad7879 *ts = dev_get_drvdata(&client->dev); - - ad7879_destroy(client, ts); + ad7879_gpio_remove(ts); + sysfs_remove_group(&ts->dev->kobj, &ad7879_attr_group); + free_irq(ts->irq, ts); + input_unregister_device(ts->input); kfree(ts); - - return 0; -} - -static const struct i2c_device_id ad7879_id[] = { - { "ad7879", 0 }, - { "ad7889", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, ad7879_id); - -static struct i2c_driver ad7879_driver = { - .driver = { - .name = "ad7879", - .owner = THIS_MODULE, - }, - .probe = ad7879_probe, - .remove = __devexit_p(ad7879_remove), - .suspend = ad7879_suspend, - .resume = ad7879_resume, - .id_table = ad7879_id, -}; - -static int __init ad7879_init(void) -{ - return i2c_add_driver(&ad7879_driver); -} -module_init(ad7879_init); - -static void __exit ad7879_exit(void) -{ - i2c_del_driver(&ad7879_driver); } -module_exit(ad7879_exit); -#endif +EXPORT_SYMBOL(ad7879_remove); MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); MODULE_DESCRIPTION("AD7879(-1) touchscreen Driver"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("spi:ad7879"); diff --git a/drivers/input/touchscreen/ad7879.h b/drivers/input/touchscreen/ad7879.h new file mode 100644 index 000000000000..6b45a27236c7 --- /dev/null +++ b/drivers/input/touchscreen/ad7879.h @@ -0,0 +1,30 @@ +/* + * AD7879/AD7889 touchscreen (bus interfaces) + * + * Copyright (C) 2008-2010 Michael Hennerich, Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _AD7879_H_ +#define _AD7879_H_ + +#include <linux/types.h> + +struct ad7879; +struct device; + +struct ad7879_bus_ops { + u16 bustype; + int (*read)(struct device *dev, u8 reg); + int (*multi_read)(struct device *dev, u8 first_reg, u8 count, u16 *buf); + int (*write)(struct device *dev, u8 reg, u16 val); +}; + +void ad7879_suspend(struct ad7879 *); +void ad7879_resume(struct ad7879 *); +struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned irq, + const struct ad7879_bus_ops *bops); +void ad7879_remove(struct ad7879 *); + +#endif diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index a9fdf55c0238..16031933a8f6 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -68,6 +68,8 @@ struct ts_event { u16 y; u16 z1, z2; int ignore; + u8 x_buf[3]; + u8 y_buf[3]; }; /* @@ -79,6 +81,8 @@ struct ads7846_packet { u8 read_x, read_y, read_z1, read_z2, pwrdown; u16 dummy; /* for the pwrdown read */ struct ts_event tc; + /* for ads7845 with mpc5121 psc spi we use 3-byte buffers */ + u8 read_x_cmd[3], read_y_cmd[3], pwrdown_cmd[3]; }; struct ads7846 { @@ -207,6 +211,14 @@ struct ser_req { struct spi_transfer xfer[6]; }; +struct ads7845_ser_req { + u8 command[3]; + u8 pwrdown[3]; + u8 sample[3]; + struct spi_message msg; + struct spi_transfer xfer[2]; +}; + static void ads7846_enable(struct ads7846 *ts); static void ads7846_disable(struct ads7846 *ts); @@ -287,6 +299,41 @@ static int ads7846_read12_ser(struct device *dev, unsigned command) return status; } +static int ads7845_read12_ser(struct device *dev, unsigned command) +{ + struct spi_device *spi = to_spi_device(dev); + struct ads7846 *ts = dev_get_drvdata(dev); + struct ads7845_ser_req *req = kzalloc(sizeof *req, GFP_KERNEL); + int status; + + if (!req) + return -ENOMEM; + + spi_message_init(&req->msg); + + req->command[0] = (u8) command; + req->xfer[0].tx_buf = req->command; + req->xfer[0].rx_buf = req->sample; + req->xfer[0].len = 3; + spi_message_add_tail(&req->xfer[0], &req->msg); + + ts->irq_disabled = 1; + disable_irq(spi->irq); + status = spi_sync(spi, &req->msg); + ts->irq_disabled = 0; + enable_irq(spi->irq); + + if (status == 0) { + /* BE12 value, then padding */ + status = be16_to_cpu(*((u16 *)&req->sample[1])); + status = status >> 3; + status &= 0x0fff; + } + + kfree(req); + return status; +} + #if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE) #define SHOW(name, var, adjust) static ssize_t \ @@ -540,10 +587,17 @@ static void ads7846_rx(void *ads) /* ads7846_rx_val() did in-place conversion (including byteswap) from * on-the-wire format as part of debouncing to get stable readings. */ - x = packet->tc.x; - y = packet->tc.y; - z1 = packet->tc.z1; - z2 = packet->tc.z2; + if (ts->model == 7845) { + x = *(u16 *)packet->tc.x_buf; + y = *(u16 *)packet->tc.y_buf; + z1 = 0; + z2 = 0; + } else { + x = packet->tc.x; + y = packet->tc.y; + z1 = packet->tc.z1; + z2 = packet->tc.z2; + } /* range filtering */ if (x == MAX_12BIT) @@ -551,6 +605,12 @@ static void ads7846_rx(void *ads) if (ts->model == 7843) { Rt = ts->pressure_max / 2; + } else if (ts->model == 7845) { + if (get_pendown_state(ts)) + Rt = ts->pressure_max / 2; + else + Rt = 0; + dev_vdbg(&ts->spi->dev, "x/y: %d/%d, PD %d\n", x, y, Rt); } else if (likely(x && z1)) { /* compute touch pressure resistance using equation #2 */ Rt = z2; @@ -671,10 +731,14 @@ static void ads7846_rx_val(void *ads) m = &ts->msg[ts->msg_idx]; t = list_entry(m->transfers.prev, struct spi_transfer, transfer_list); - /* adjust: on-wire is a must-ignore bit, a BE12 value, then padding; - * built from two 8 bit values written msb-first. - */ - val = be16_to_cpup((__be16 *)t->rx_buf) >> 3; + if (ts->model == 7845) { + val = be16_to_cpup((__be16 *)&(((char*)t->rx_buf)[1])) >> 3; + } else { + /* adjust: on-wire is a must-ignore bit, a BE12 value, then + * padding; built from two 8 bit values written msb-first. + */ + val = be16_to_cpup((__be16 *)t->rx_buf) >> 3; + } action = ts->filter(ts->filter_data, ts->msg_idx, &val); switch (action) { @@ -878,14 +942,15 @@ static int __devinit setup_pendown(struct spi_device *spi, struct ads7846 *ts) static int __devinit ads7846_probe(struct spi_device *spi) { - struct ads7846 *ts; - struct ads7846_packet *packet; - struct input_dev *input_dev; - struct ads7846_platform_data *pdata = spi->dev.platform_data; - struct spi_message *m; - struct spi_transfer *x; - int vref; - int err; + struct ads7846 *ts; + struct ads7846_packet *packet; + struct input_dev *input_dev; + const struct ads7846_platform_data *pdata = spi->dev.platform_data; + struct spi_message *m; + struct spi_transfer *x; + unsigned long irq_flags; + int vref; + int err; if (!spi->irq) { dev_dbg(&spi->dev, "no IRQ?\n"); @@ -1008,16 +1073,26 @@ static int __devinit ads7846_probe(struct spi_device *spi) spi_message_init(m); - /* y- still on; turn on only y+ (and ADC) */ - packet->read_y = READ_Y(vref); - x->tx_buf = &packet->read_y; - x->len = 1; - spi_message_add_tail(x, m); + if (ts->model == 7845) { + packet->read_y_cmd[0] = READ_Y(vref); + packet->read_y_cmd[1] = 0; + packet->read_y_cmd[2] = 0; + x->tx_buf = &packet->read_y_cmd[0]; + x->rx_buf = &packet->tc.y_buf[0]; + x->len = 3; + spi_message_add_tail(x, m); + } else { + /* y- still on; turn on only y+ (and ADC) */ + packet->read_y = READ_Y(vref); + x->tx_buf = &packet->read_y; + x->len = 1; + spi_message_add_tail(x, m); - x++; - x->rx_buf = &packet->tc.y; - x->len = 2; - spi_message_add_tail(x, m); + x++; + x->rx_buf = &packet->tc.y; + x->len = 2; + spi_message_add_tail(x, m); + } /* the first sample after switching drivers can be low quality; * optionally discard it, using a second one after the signals @@ -1043,17 +1118,28 @@ static int __devinit ads7846_probe(struct spi_device *spi) m++; spi_message_init(m); - /* turn y- off, x+ on, then leave in lowpower */ - x++; - packet->read_x = READ_X(vref); - x->tx_buf = &packet->read_x; - x->len = 1; - spi_message_add_tail(x, m); + if (ts->model == 7845) { + x++; + packet->read_x_cmd[0] = READ_X(vref); + packet->read_x_cmd[1] = 0; + packet->read_x_cmd[2] = 0; + x->tx_buf = &packet->read_x_cmd[0]; + x->rx_buf = &packet->tc.x_buf[0]; + x->len = 3; + spi_message_add_tail(x, m); + } else { + /* turn y- off, x+ on, then leave in lowpower */ + x++; + packet->read_x = READ_X(vref); + x->tx_buf = &packet->read_x; + x->len = 1; + spi_message_add_tail(x, m); - x++; - x->rx_buf = &packet->tc.x; - x->len = 2; - spi_message_add_tail(x, m); + x++; + x->rx_buf = &packet->tc.x; + x->len = 2; + spi_message_add_tail(x, m); + } /* ... maybe discard first sample ... */ if (pdata->settle_delay_usecs) { @@ -1144,15 +1230,25 @@ static int __devinit ads7846_probe(struct spi_device *spi) m++; spi_message_init(m); - x++; - packet->pwrdown = PWRDOWN; - x->tx_buf = &packet->pwrdown; - x->len = 1; - spi_message_add_tail(x, m); + if (ts->model == 7845) { + x++; + packet->pwrdown_cmd[0] = PWRDOWN; + packet->pwrdown_cmd[1] = 0; + packet->pwrdown_cmd[2] = 0; + x->tx_buf = &packet->pwrdown_cmd[0]; + x->len = 3; + } else { + x++; + packet->pwrdown = PWRDOWN; + x->tx_buf = &packet->pwrdown; + x->len = 1; + spi_message_add_tail(x, m); + + x++; + x->rx_buf = &packet->dummy; + x->len = 2; + } - x++; - x->rx_buf = &packet->dummy; - x->len = 2; CS_CHANGE(*x); spi_message_add_tail(x, m); @@ -1174,17 +1270,22 @@ static int __devinit ads7846_probe(struct spi_device *spi) goto err_put_regulator; } - if (request_irq(spi->irq, ads7846_irq, IRQF_TRIGGER_FALLING, - spi->dev.driver->name, ts)) { + irq_flags = pdata->irq_flags ? : IRQF_TRIGGER_FALLING; + + err = request_irq(spi->irq, ads7846_irq, irq_flags, + spi->dev.driver->name, ts); + + if (err && !pdata->irq_flags) { dev_info(&spi->dev, "trying pin change workaround on irq %d\n", spi->irq); err = request_irq(spi->irq, ads7846_irq, IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, spi->dev.driver->name, ts); - if (err) { - dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq); - goto err_disable_regulator; - } + } + + if (err) { + dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq); + goto err_disable_regulator; } err = ads784x_hwmon_register(spi, ts); @@ -1196,8 +1297,11 @@ static int __devinit ads7846_probe(struct spi_device *spi) /* take a first sample, leaving nPENIRQ active and vREF off; avoid * the touchscreen, in case it's not connected. */ - (void) ads7846_read12_ser(&spi->dev, - READ_12BIT_SER(vaux) | ADS_PD10_ALL_ON); + if (ts->model == 7845) + ads7845_read12_ser(&spi->dev, PWRDOWN); + else + (void) ads7846_read12_ser(&spi->dev, + READ_12BIT_SER(vaux) | ADS_PD10_ALL_ON); err = sysfs_create_group(&spi->dev.kobj, &ads784x_attr_group); if (err) diff --git a/drivers/input/touchscreen/cy8ctmg110_ts.c b/drivers/input/touchscreen/cy8ctmg110_ts.c new file mode 100644 index 000000000000..5ec0946938fe --- /dev/null +++ b/drivers/input/touchscreen/cy8ctmg110_ts.c @@ -0,0 +1,363 @@ +/* + * Driver for cypress touch screen controller + * + * Copyright (c) 2009 Aava Mobile + * + * Some cleanups by Alan Cox <alan@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/input.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/input/cy8ctmg110_pdata.h> + +#define CY8CTMG110_DRIVER_NAME "cy8ctmg110" + +/* Touch coordinates */ +#define CY8CTMG110_X_MIN 0 +#define CY8CTMG110_Y_MIN 0 +#define CY8CTMG110_X_MAX 759 +#define CY8CTMG110_Y_MAX 465 + + +/* cy8ctmg110 register definitions */ +#define CY8CTMG110_TOUCH_WAKEUP_TIME 0 +#define CY8CTMG110_TOUCH_SLEEP_TIME 2 +#define CY8CTMG110_TOUCH_X1 3 +#define CY8CTMG110_TOUCH_Y1 5 +#define CY8CTMG110_TOUCH_X2 7 +#define CY8CTMG110_TOUCH_Y2 9 +#define CY8CTMG110_FINGERS 11 +#define CY8CTMG110_GESTURE 12 +#define CY8CTMG110_REG_MAX 13 + + +/* + * The touch driver structure. + */ +struct cy8ctmg110 { + struct input_dev *input; + char phys[32]; + struct i2c_client *client; + int reset_pin; + int irq_pin; +}; + +/* + * cy8ctmg110_power is the routine that is called when touch hardware + * will powered off or on. + */ +static void cy8ctmg110_power(struct cy8ctmg110 *ts, bool poweron) +{ + if (ts->reset_pin) + gpio_direction_output(ts->reset_pin, 1 - poweron); +} + +static int cy8ctmg110_write_regs(struct cy8ctmg110 *tsc, unsigned char reg, + unsigned char len, unsigned char *value) +{ + struct i2c_client *client = tsc->client; + int ret; + unsigned char i2c_data[6]; + + BUG_ON(len > 5); + + i2c_data[0] = reg; + memcpy(i2c_data + 1, value, len); + + ret = i2c_master_send(client, i2c_data, len + 1); + if (ret != 1) { + dev_err(&client->dev, "i2c write data cmd failed\n"); + return ret ? ret : -EIO; + } + + return 0; +} + +static int cy8ctmg110_read_regs(struct cy8ctmg110 *tsc, + unsigned char *data, unsigned char len, unsigned char cmd) +{ + struct i2c_client *client = tsc->client; + int ret; + struct i2c_msg msg[2] = { + /* first write slave position to i2c devices */ + { client->addr, 0, 1, &cmd }, + /* Second read data from position */ + { client->addr, I2C_M_RD, len, data } + }; + + ret = i2c_transfer(client->adapter, msg, 2); + if (ret < 0) + return ret; + + return 0; +} + +static int cy8ctmg110_touch_pos(struct cy8ctmg110 *tsc) +{ + struct input_dev *input = tsc->input; + unsigned char reg_p[CY8CTMG110_REG_MAX]; + int x, y; + + memset(reg_p, 0, CY8CTMG110_REG_MAX); + + /* Reading coordinates */ + if (cy8ctmg110_read_regs(tsc, reg_p, 9, CY8CTMG110_TOUCH_X1) != 0) + return -EIO; + + y = reg_p[2] << 8 | reg_p[3]; + x = reg_p[0] << 8 | reg_p[1]; + + /* Number of touch */ + if (reg_p[8] == 0) { + input_report_key(input, BTN_TOUCH, 0); + } else { + input_report_key(input, BTN_TOUCH, 1); + input_report_abs(input, ABS_X, x); + input_report_abs(input, ABS_Y, y); + } + + input_sync(input); + + return 0; +} + +static int cy8ctmg110_set_sleepmode(struct cy8ctmg110 *ts, bool sleep) +{ + unsigned char reg_p[3]; + + if (sleep) { + reg_p[0] = 0x00; + reg_p[1] = 0xff; + reg_p[2] = 5; + } else { + reg_p[0] = 0x10; + reg_p[1] = 0xff; + reg_p[2] = 0; + } + + return cy8ctmg110_write_regs(ts, CY8CTMG110_TOUCH_WAKEUP_TIME, 3, reg_p); +} + +static irqreturn_t cy8ctmg110_irq_thread(int irq, void *dev_id) +{ + struct cy8ctmg110 *tsc = dev_id; + + cy8ctmg110_touch_pos(tsc); + + return IRQ_HANDLED; +} + +static int __devinit cy8ctmg110_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct cy8ctmg110_pdata *pdata = client->dev.platform_data; + struct cy8ctmg110 *ts; + struct input_dev *input_dev; + int err; + + /* No pdata no way forward */ + if (pdata == NULL) { + dev_err(&client->dev, "no pdata\n"); + return -ENODEV; + } + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_WORD_DATA)) + return -EIO; + + ts = kzalloc(sizeof(struct cy8ctmg110), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ts || !input_dev) { + err = -ENOMEM; + goto err_free_mem; + } + + ts->client = client; + ts->input = input_dev; + + snprintf(ts->phys, sizeof(ts->phys), + "%s/input0", dev_name(&client->dev)); + + input_dev->name = CY8CTMG110_DRIVER_NAME " Touchscreen"; + input_dev->phys = ts->phys; + input_dev->id.bustype = BUS_I2C; + input_dev->dev.parent = &client->dev; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + input_set_abs_params(input_dev, ABS_X, + CY8CTMG110_X_MIN, CY8CTMG110_X_MAX, 0, 0); + input_set_abs_params(input_dev, ABS_Y, + CY8CTMG110_Y_MIN, CY8CTMG110_Y_MAX, 0, 0); + + if (ts->reset_pin) { + err = gpio_request(ts->reset_pin, NULL); + if (err) { + dev_err(&client->dev, + "Unable to request GPIO pin %d.\n", + ts->reset_pin); + goto err_free_mem; + } + } + + cy8ctmg110_power(ts, true); + cy8ctmg110_set_sleepmode(ts, false); + + err = gpio_request(ts->irq_pin, "touch_irq_key"); + if (err < 0) { + dev_err(&client->dev, + "Failed to request GPIO %d, error %d\n", + ts->irq_pin, err); + goto err_shutoff_device; + } + + err = gpio_direction_input(ts->irq_pin); + if (err < 0) { + dev_err(&client->dev, + "Failed to configure input direction for GPIO %d, error %d\n", + ts->irq_pin, err); + goto err_free_irq_gpio; + } + + client->irq = gpio_to_irq(ts->irq_pin); + if (client->irq < 0) { + err = client->irq; + dev_err(&client->dev, + "Unable to get irq number for GPIO %d, error %d\n", + ts->irq_pin, err); + goto err_free_irq_gpio; + } + + err = request_threaded_irq(client->irq, NULL, cy8ctmg110_irq_thread, + IRQF_TRIGGER_RISING, "touch_reset_key", ts); + if (err < 0) { + dev_err(&client->dev, + "irq %d busy? error %d\n", client->irq, err); + goto err_free_irq_gpio; + } + + err = input_register_device(input_dev); + if (err) + goto err_free_irq; + + i2c_set_clientdata(client, ts); + device_init_wakeup(&client->dev, 1); + return 0; + +err_free_irq: + free_irq(client->irq, ts); +err_free_irq_gpio: + gpio_free(ts->irq_pin); +err_shutoff_device: + cy8ctmg110_set_sleepmode(ts, true); + cy8ctmg110_power(ts, false); + if (ts->reset_pin) + gpio_free(ts->reset_pin); +err_free_mem: + input_free_device(input_dev); + kfree(ts); + return err; +} + +#ifdef CONFIG_PM +static int cy8ctmg110_suspend(struct i2c_client *client, pm_message_t mesg) +{ + struct cy8ctmg110 *ts = i2c_get_clientdata(client); + + if (device_may_wakeup(&client->dev)) + enable_irq_wake(client->irq); + else { + cy8ctmg110_set_sleepmode(ts, true); + cy8ctmg110_power(ts, false); + } + return 0; +} + +static int cy8ctmg110_resume(struct i2c_client *client) +{ + struct cy8ctmg110 *ts = i2c_get_clientdata(client); + + if (device_may_wakeup(&client->dev)) + disable_irq_wake(client->irq); + else { + cy8ctmg110_power(ts, true); + cy8ctmg110_set_sleepmode(ts, false); + } + return 0; +} +#endif + +static int __devexit cy8ctmg110_remove(struct i2c_client *client) +{ + struct cy8ctmg110 *ts = i2c_get_clientdata(client); + + cy8ctmg110_set_sleepmode(ts, true); + cy8ctmg110_power(ts, false); + + free_irq(client->irq, ts); + input_unregister_device(ts->input); + gpio_free(ts->irq_pin); + if (ts->reset_pin) + gpio_free(ts->reset_pin); + kfree(ts); + + return 0; +} + +static struct i2c_device_id cy8ctmg110_idtable[] = { + { CY8CTMG110_DRIVER_NAME, 1 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, cy8ctmg110_idtable); + +static struct i2c_driver cy8ctmg110_driver = { + .driver = { + .owner = THIS_MODULE, + .name = CY8CTMG110_DRIVER_NAME, + }, + .id_table = cy8ctmg110_idtable, + .probe = cy8ctmg110_probe, + .remove = __devexit_p(cy8ctmg110_remove), +#ifdef CONFIG_PM + .suspend = cy8ctmg110_suspend, + .resume = cy8ctmg110_resume, +#endif +}; + +static int __init cy8ctmg110_init(void) +{ + return i2c_add_driver(&cy8ctmg110_driver); +} + +static void __exit cy8ctmg110_exit(void) +{ + i2c_del_driver(&cy8ctmg110_driver); +} + +module_init(cy8ctmg110_init); +module_exit(cy8ctmg110_exit); + +MODULE_AUTHOR("Samuli Konttila <samuli.konttila@aavamobile.com>"); +MODULE_DESCRIPTION("cy8ctmg110 TouchScreen Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/touchscreen/mcs5000_ts.c b/drivers/input/touchscreen/mcs5000_ts.c index 1fb0c2f06a44..6ee9940aaf5b 100644 --- a/drivers/input/touchscreen/mcs5000_ts.c +++ b/drivers/input/touchscreen/mcs5000_ts.c @@ -16,7 +16,7 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/i2c.h> -#include <linux/i2c/mcs5000_ts.h> +#include <linux/i2c/mcs.h> #include <linux/interrupt.h> #include <linux/input.h> #include <linux/irq.h> @@ -105,7 +105,7 @@ enum mcs5000_ts_read_offset { struct mcs5000_ts_data { struct i2c_client *client; struct input_dev *input_dev; - const struct mcs5000_ts_platform_data *platform_data; + const struct mcs_platform_data *platform_data; }; static irqreturn_t mcs5000_ts_interrupt(int irq, void *dev_id) @@ -164,7 +164,7 @@ static irqreturn_t mcs5000_ts_interrupt(int irq, void *dev_id) static void mcs5000_ts_phys_init(struct mcs5000_ts_data *data) { - const struct mcs5000_ts_platform_data *platform_data = + const struct mcs_platform_data *platform_data = data->platform_data; struct i2c_client *client = data->client; diff --git a/drivers/input/touchscreen/qt602240_ts.c b/drivers/input/touchscreen/qt602240_ts.c new file mode 100644 index 000000000000..66b26ad3032a --- /dev/null +++ b/drivers/input/touchscreen/qt602240_ts.c @@ -0,0 +1,1401 @@ +/* + * AT42QT602240/ATMXT224 Touchscreen driver + * + * Copyright (C) 2010 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim <jy0922.shim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/firmware.h> +#include <linux/i2c.h> +#include <linux/i2c/qt602240_ts.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/slab.h> + +/* Version */ +#define QT602240_VER_20 20 +#define QT602240_VER_21 21 +#define QT602240_VER_22 22 + +/* Slave addresses */ +#define QT602240_APP_LOW 0x4a +#define QT602240_APP_HIGH 0x4b +#define QT602240_BOOT_LOW 0x24 +#define QT602240_BOOT_HIGH 0x25 + +/* Firmware */ +#define QT602240_FW_NAME "qt602240.fw" + +/* Registers */ +#define QT602240_FAMILY_ID 0x00 +#define QT602240_VARIANT_ID 0x01 +#define QT602240_VERSION 0x02 +#define QT602240_BUILD 0x03 +#define QT602240_MATRIX_X_SIZE 0x04 +#define QT602240_MATRIX_Y_SIZE 0x05 +#define QT602240_OBJECT_NUM 0x06 +#define QT602240_OBJECT_START 0x07 + +#define QT602240_OBJECT_SIZE 6 + +/* Object types */ +#define QT602240_DEBUG_DIAGNOSTIC 37 +#define QT602240_GEN_MESSAGE 5 +#define QT602240_GEN_COMMAND 6 +#define QT602240_GEN_POWER 7 +#define QT602240_GEN_ACQUIRE 8 +#define QT602240_TOUCH_MULTI 9 +#define QT602240_TOUCH_KEYARRAY 15 +#define QT602240_TOUCH_PROXIMITY 23 +#define QT602240_PROCI_GRIPFACE 20 +#define QT602240_PROCG_NOISE 22 +#define QT602240_PROCI_ONETOUCH 24 +#define QT602240_PROCI_TWOTOUCH 27 +#define QT602240_SPT_COMMSCONFIG 18 /* firmware ver 21 over */ +#define QT602240_SPT_GPIOPWM 19 +#define QT602240_SPT_SELFTEST 25 +#define QT602240_SPT_CTECONFIG 28 +#define QT602240_SPT_USERDATA 38 /* firmware ver 21 over */ + +/* QT602240_GEN_COMMAND field */ +#define QT602240_COMMAND_RESET 0 +#define QT602240_COMMAND_BACKUPNV 1 +#define QT602240_COMMAND_CALIBRATE 2 +#define QT602240_COMMAND_REPORTALL 3 +#define QT602240_COMMAND_DIAGNOSTIC 5 + +/* QT602240_GEN_POWER field */ +#define QT602240_POWER_IDLEACQINT 0 +#define QT602240_POWER_ACTVACQINT 1 +#define QT602240_POWER_ACTV2IDLETO 2 + +/* QT602240_GEN_ACQUIRE field */ +#define QT602240_ACQUIRE_CHRGTIME 0 +#define QT602240_ACQUIRE_TCHDRIFT 2 +#define QT602240_ACQUIRE_DRIFTST 3 +#define QT602240_ACQUIRE_TCHAUTOCAL 4 +#define QT602240_ACQUIRE_SYNC 5 +#define QT602240_ACQUIRE_ATCHCALST 6 +#define QT602240_ACQUIRE_ATCHCALSTHR 7 + +/* QT602240_TOUCH_MULTI field */ +#define QT602240_TOUCH_CTRL 0 +#define QT602240_TOUCH_XORIGIN 1 +#define QT602240_TOUCH_YORIGIN 2 +#define QT602240_TOUCH_XSIZE 3 +#define QT602240_TOUCH_YSIZE 4 +#define QT602240_TOUCH_BLEN 6 +#define QT602240_TOUCH_TCHTHR 7 +#define QT602240_TOUCH_TCHDI 8 +#define QT602240_TOUCH_ORIENT 9 +#define QT602240_TOUCH_MOVHYSTI 11 +#define QT602240_TOUCH_MOVHYSTN 12 +#define QT602240_TOUCH_NUMTOUCH 14 +#define QT602240_TOUCH_MRGHYST 15 +#define QT602240_TOUCH_MRGTHR 16 +#define QT602240_TOUCH_AMPHYST 17 +#define QT602240_TOUCH_XRANGE_LSB 18 +#define QT602240_TOUCH_XRANGE_MSB 19 +#define QT602240_TOUCH_YRANGE_LSB 20 +#define QT602240_TOUCH_YRANGE_MSB 21 +#define QT602240_TOUCH_XLOCLIP 22 +#define QT602240_TOUCH_XHICLIP 23 +#define QT602240_TOUCH_YLOCLIP 24 +#define QT602240_TOUCH_YHICLIP 25 +#define QT602240_TOUCH_XEDGECTRL 26 +#define QT602240_TOUCH_XEDGEDIST 27 +#define QT602240_TOUCH_YEDGECTRL 28 +#define QT602240_TOUCH_YEDGEDIST 29 +#define QT602240_TOUCH_JUMPLIMIT 30 /* firmware ver 22 over */ + +/* QT602240_PROCI_GRIPFACE field */ +#define QT602240_GRIPFACE_CTRL 0 +#define QT602240_GRIPFACE_XLOGRIP 1 +#define QT602240_GRIPFACE_XHIGRIP 2 +#define QT602240_GRIPFACE_YLOGRIP 3 +#define QT602240_GRIPFACE_YHIGRIP 4 +#define QT602240_GRIPFACE_MAXTCHS 5 +#define QT602240_GRIPFACE_SZTHR1 7 +#define QT602240_GRIPFACE_SZTHR2 8 +#define QT602240_GRIPFACE_SHPTHR1 9 +#define QT602240_GRIPFACE_SHPTHR2 10 +#define QT602240_GRIPFACE_SUPEXTTO 11 + +/* QT602240_PROCI_NOISE field */ +#define QT602240_NOISE_CTRL 0 +#define QT602240_NOISE_OUTFLEN 1 +#define QT602240_NOISE_GCAFUL_LSB 3 +#define QT602240_NOISE_GCAFUL_MSB 4 +#define QT602240_NOISE_GCAFLL_LSB 5 +#define QT602240_NOISE_GCAFLL_MSB 6 +#define QT602240_NOISE_ACTVGCAFVALID 7 +#define QT602240_NOISE_NOISETHR 8 +#define QT602240_NOISE_FREQHOPSCALE 10 +#define QT602240_NOISE_FREQ0 11 +#define QT602240_NOISE_FREQ1 12 +#define QT602240_NOISE_FREQ2 13 +#define QT602240_NOISE_FREQ3 14 +#define QT602240_NOISE_FREQ4 15 +#define QT602240_NOISE_IDLEGCAFVALID 16 + +/* QT602240_SPT_COMMSCONFIG */ +#define QT602240_COMMS_CTRL 0 +#define QT602240_COMMS_CMD 1 + +/* QT602240_SPT_CTECONFIG field */ +#define QT602240_CTE_CTRL 0 +#define QT602240_CTE_CMD 1 +#define QT602240_CTE_MODE 2 +#define QT602240_CTE_IDLEGCAFDEPTH 3 +#define QT602240_CTE_ACTVGCAFDEPTH 4 +#define QT602240_CTE_VOLTAGE 5 /* firmware ver 21 over */ + +#define QT602240_VOLTAGE_DEFAULT 2700000 +#define QT602240_VOLTAGE_STEP 10000 + +/* Define for QT602240_GEN_COMMAND */ +#define QT602240_BOOT_VALUE 0xa5 +#define QT602240_BACKUP_VALUE 0x55 +#define QT602240_BACKUP_TIME 25 /* msec */ +#define QT602240_RESET_TIME 65 /* msec */ + +#define QT602240_FWRESET_TIME 175 /* msec */ + +/* Command to unlock bootloader */ +#define QT602240_UNLOCK_CMD_MSB 0xaa +#define QT602240_UNLOCK_CMD_LSB 0xdc + +/* Bootloader mode status */ +#define QT602240_WAITING_BOOTLOAD_CMD 0xc0 /* valid 7 6 bit only */ +#define QT602240_WAITING_FRAME_DATA 0x80 /* valid 7 6 bit only */ +#define QT602240_FRAME_CRC_CHECK 0x02 +#define QT602240_FRAME_CRC_FAIL 0x03 +#define QT602240_FRAME_CRC_PASS 0x04 +#define QT602240_APP_CRC_FAIL 0x40 /* valid 7 8 bit only */ +#define QT602240_BOOT_STATUS_MASK 0x3f + +/* Touch status */ +#define QT602240_SUPPRESS (1 << 1) +#define QT602240_AMP (1 << 2) +#define QT602240_VECTOR (1 << 3) +#define QT602240_MOVE (1 << 4) +#define QT602240_RELEASE (1 << 5) +#define QT602240_PRESS (1 << 6) +#define QT602240_DETECT (1 << 7) + +/* Touchscreen absolute values */ +#define QT602240_MAX_XC 0x3ff +#define QT602240_MAX_YC 0x3ff +#define QT602240_MAX_AREA 0xff + +#define QT602240_MAX_FINGER 10 + +/* Initial register values recommended from chip vendor */ +static const u8 init_vals_ver_20[] = { + /* QT602240_GEN_COMMAND(6) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* QT602240_GEN_POWER(7) */ + 0x20, 0xff, 0x32, + /* QT602240_GEN_ACQUIRE(8) */ + 0x08, 0x05, 0x05, 0x00, 0x00, 0x00, 0x05, 0x14, + /* QT602240_TOUCH_MULTI(9) */ + 0x00, 0x00, 0x00, 0x11, 0x0a, 0x00, 0x00, 0x00, 0x02, 0x00, + 0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x64, + /* QT602240_TOUCH_KEYARRAY(15) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, + /* QT602240_SPT_GPIOPWM(19) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, + /* QT602240_PROCI_GRIPFACE(20) */ + 0x00, 0x64, 0x64, 0x64, 0x64, 0x00, 0x00, 0x1e, 0x14, 0x04, + 0x1e, 0x00, + /* QT602240_PROCG_NOISE(22) */ + 0x05, 0x00, 0x00, 0x19, 0x00, 0xe7, 0xff, 0x04, 0x32, 0x00, + 0x01, 0x0a, 0x0f, 0x14, 0x00, 0x00, 0xe8, + /* QT602240_TOUCH_PROXIMITY(23) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, + /* QT602240_PROCI_ONETOUCH(24) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* QT602240_SPT_SELFTEST(25) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + /* QT602240_PROCI_TWOTOUCH(27) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* QT602240_SPT_CTECONFIG(28) */ + 0x00, 0x00, 0x00, 0x04, 0x08, +}; + +static const u8 init_vals_ver_21[] = { + /* QT602240_GEN_COMMAND(6) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* QT602240_GEN_POWER(7) */ + 0x20, 0xff, 0x32, + /* QT602240_GEN_ACQUIRE(8) */ + 0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23, + /* QT602240_TOUCH_MULTI(9) */ + 0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00, + 0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* QT602240_TOUCH_KEYARRAY(15) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, + /* QT602240_SPT_GPIOPWM(19) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* QT602240_PROCI_GRIPFACE(20) */ + 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04, + 0x0f, 0x0a, + /* QT602240_PROCG_NOISE(22) */ + 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00, + 0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03, + /* QT602240_TOUCH_PROXIMITY(23) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, + /* QT602240_PROCI_ONETOUCH(24) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* QT602240_SPT_SELFTEST(25) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + /* QT602240_PROCI_TWOTOUCH(27) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* QT602240_SPT_CTECONFIG(28) */ + 0x00, 0x00, 0x00, 0x08, 0x10, 0x00, +}; + +static const u8 init_vals_ver_22[] = { + /* QT602240_GEN_COMMAND(6) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* QT602240_GEN_POWER(7) */ + 0x20, 0xff, 0x32, + /* QT602240_GEN_ACQUIRE(8) */ + 0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23, + /* QT602240_TOUCH_MULTI(9) */ + 0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00, + 0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, + /* QT602240_TOUCH_KEYARRAY(15) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, + /* QT602240_SPT_GPIOPWM(19) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* QT602240_PROCI_GRIPFACE(20) */ + 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04, + 0x0f, 0x0a, + /* QT602240_PROCG_NOISE(22) */ + 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00, + 0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03, + /* QT602240_TOUCH_PROXIMITY(23) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + /* QT602240_PROCI_ONETOUCH(24) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* QT602240_SPT_SELFTEST(25) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + /* QT602240_PROCI_TWOTOUCH(27) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* QT602240_SPT_CTECONFIG(28) */ + 0x00, 0x00, 0x00, 0x08, 0x10, 0x00, +}; + +struct qt602240_info { + u8 family_id; + u8 variant_id; + u8 version; + u8 build; + u8 matrix_xsize; + u8 matrix_ysize; + u8 object_num; +}; + +struct qt602240_object { + u8 type; + u16 start_address; + u8 size; + u8 instances; + u8 num_report_ids; + + /* to map object and message */ + u8 max_reportid; +}; + +struct qt602240_message { + u8 reportid; + u8 message[7]; + u8 checksum; +}; + +struct qt602240_finger { + int status; + int x; + int y; + int area; +}; + +/* Each client has this additional data */ +struct qt602240_data { + struct i2c_client *client; + struct input_dev *input_dev; + const struct qt602240_platform_data *pdata; + struct qt602240_object *object_table; + struct qt602240_info info; + struct qt602240_finger finger[QT602240_MAX_FINGER]; + unsigned int irq; +}; + +static bool qt602240_object_readable(unsigned int type) +{ + switch (type) { + case QT602240_GEN_MESSAGE: + case QT602240_GEN_COMMAND: + case QT602240_GEN_POWER: + case QT602240_GEN_ACQUIRE: + case QT602240_TOUCH_MULTI: + case QT602240_TOUCH_KEYARRAY: + case QT602240_TOUCH_PROXIMITY: + case QT602240_PROCI_GRIPFACE: + case QT602240_PROCG_NOISE: + case QT602240_PROCI_ONETOUCH: + case QT602240_PROCI_TWOTOUCH: + case QT602240_SPT_COMMSCONFIG: + case QT602240_SPT_GPIOPWM: + case QT602240_SPT_SELFTEST: + case QT602240_SPT_CTECONFIG: + case QT602240_SPT_USERDATA: + return true; + default: + return false; + } +} + +static bool qt602240_object_writable(unsigned int type) +{ + switch (type) { + case QT602240_GEN_COMMAND: + case QT602240_GEN_POWER: + case QT602240_GEN_ACQUIRE: + case QT602240_TOUCH_MULTI: + case QT602240_TOUCH_KEYARRAY: + case QT602240_TOUCH_PROXIMITY: + case QT602240_PROCI_GRIPFACE: + case QT602240_PROCG_NOISE: + case QT602240_PROCI_ONETOUCH: + case QT602240_PROCI_TWOTOUCH: + case QT602240_SPT_GPIOPWM: + case QT602240_SPT_SELFTEST: + case QT602240_SPT_CTECONFIG: + return true; + default: + return false; + } +} + +static void qt602240_dump_message(struct device *dev, + struct qt602240_message *message) +{ + dev_dbg(dev, "reportid:\t0x%x\n", message->reportid); + dev_dbg(dev, "message1:\t0x%x\n", message->message[0]); + dev_dbg(dev, "message2:\t0x%x\n", message->message[1]); + dev_dbg(dev, "message3:\t0x%x\n", message->message[2]); + dev_dbg(dev, "message4:\t0x%x\n", message->message[3]); + dev_dbg(dev, "message5:\t0x%x\n", message->message[4]); + dev_dbg(dev, "message6:\t0x%x\n", message->message[5]); + dev_dbg(dev, "message7:\t0x%x\n", message->message[6]); + dev_dbg(dev, "checksum:\t0x%x\n", message->checksum); +} + +static int qt602240_check_bootloader(struct i2c_client *client, + unsigned int state) +{ + u8 val; + +recheck: + if (i2c_master_recv(client, &val, 1) != 1) { + dev_err(&client->dev, "%s: i2c recv failed\n", __func__); + return -EIO; + } + + switch (state) { + case QT602240_WAITING_BOOTLOAD_CMD: + case QT602240_WAITING_FRAME_DATA: + val &= ~QT602240_BOOT_STATUS_MASK; + break; + case QT602240_FRAME_CRC_PASS: + if (val == QT602240_FRAME_CRC_CHECK) + goto recheck; + break; + default: + return -EINVAL; + } + + if (val != state) { + dev_err(&client->dev, "Unvalid bootloader mode state\n"); + return -EINVAL; + } + + return 0; +} + +static int qt602240_unlock_bootloader(struct i2c_client *client) +{ + u8 buf[2]; + + buf[0] = QT602240_UNLOCK_CMD_LSB; + buf[1] = QT602240_UNLOCK_CMD_MSB; + + if (i2c_master_send(client, buf, 2) != 2) { + dev_err(&client->dev, "%s: i2c send failed\n", __func__); + return -EIO; + } + + return 0; +} + +static int qt602240_fw_write(struct i2c_client *client, + const u8 *data, unsigned int frame_size) +{ + if (i2c_master_send(client, data, frame_size) != frame_size) { + dev_err(&client->dev, "%s: i2c send failed\n", __func__); + return -EIO; + } + + return 0; +} + +static int __qt602240_read_reg(struct i2c_client *client, + u16 reg, u16 len, void *val) +{ + struct i2c_msg xfer[2]; + u8 buf[2]; + + buf[0] = reg & 0xff; + buf[1] = (reg >> 8) & 0xff; + + /* Write register */ + xfer[0].addr = client->addr; + xfer[0].flags = 0; + xfer[0].len = 2; + xfer[0].buf = buf; + + /* Read data */ + xfer[1].addr = client->addr; + xfer[1].flags = I2C_M_RD; + xfer[1].len = len; + xfer[1].buf = val; + + if (i2c_transfer(client->adapter, xfer, 2) != 2) { + dev_err(&client->dev, "%s: i2c transfer failed\n", __func__); + return -EIO; + } + + return 0; +} + +static int qt602240_read_reg(struct i2c_client *client, u16 reg, u8 *val) +{ + return __qt602240_read_reg(client, reg, 1, val); +} + +static int qt602240_write_reg(struct i2c_client *client, u16 reg, u8 val) +{ + u8 buf[3]; + + buf[0] = reg & 0xff; + buf[1] = (reg >> 8) & 0xff; + buf[2] = val; + + if (i2c_master_send(client, buf, 3) != 3) { + dev_err(&client->dev, "%s: i2c send failed\n", __func__); + return -EIO; + } + + return 0; +} + +static int qt602240_read_object_table(struct i2c_client *client, + u16 reg, u8 *object_buf) +{ + return __qt602240_read_reg(client, reg, QT602240_OBJECT_SIZE, + object_buf); +} + +static struct qt602240_object * +qt602240_get_object(struct qt602240_data *data, u8 type) +{ + struct qt602240_object *object; + int i; + + for (i = 0; i < data->info.object_num; i++) { + object = data->object_table + i; + if (object->type == type) + return object; + } + + dev_err(&data->client->dev, "Invalid object type\n"); + return NULL; +} + +static int qt602240_read_message(struct qt602240_data *data, + struct qt602240_message *message) +{ + struct qt602240_object *object; + u16 reg; + + object = qt602240_get_object(data, QT602240_GEN_MESSAGE); + if (!object) + return -EINVAL; + + reg = object->start_address; + return __qt602240_read_reg(data->client, reg, + sizeof(struct qt602240_message), message); +} + +static int qt602240_read_object(struct qt602240_data *data, + u8 type, u8 offset, u8 *val) +{ + struct qt602240_object *object; + u16 reg; + + object = qt602240_get_object(data, type); + if (!object) + return -EINVAL; + + reg = object->start_address; + return __qt602240_read_reg(data->client, reg + offset, 1, val); +} + +static int qt602240_write_object(struct qt602240_data *data, + u8 type, u8 offset, u8 val) +{ + struct qt602240_object *object; + u16 reg; + + object = qt602240_get_object(data, type); + if (!object) + return -EINVAL; + + reg = object->start_address; + return qt602240_write_reg(data->client, reg + offset, val); +} + +static void qt602240_input_report(struct qt602240_data *data, int single_id) +{ + struct qt602240_finger *finger = data->finger; + struct input_dev *input_dev = data->input_dev; + int status = finger[single_id].status; + int finger_num = 0; + int id; + + for (id = 0; id < QT602240_MAX_FINGER; id++) { + if (!finger[id].status) + continue; + + input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, + finger[id].status != QT602240_RELEASE ? + finger[id].area : 0); + input_report_abs(input_dev, ABS_MT_POSITION_X, + finger[id].x); + input_report_abs(input_dev, ABS_MT_POSITION_Y, + finger[id].y); + input_mt_sync(input_dev); + + if (finger[id].status == QT602240_RELEASE) + finger[id].status = 0; + else + finger_num++; + } + + input_report_key(input_dev, BTN_TOUCH, finger_num > 0); + + if (status != QT602240_RELEASE) { + input_report_abs(input_dev, ABS_X, finger[single_id].x); + input_report_abs(input_dev, ABS_Y, finger[single_id].y); + } + + input_sync(input_dev); +} + +static void qt602240_input_touchevent(struct qt602240_data *data, + struct qt602240_message *message, int id) +{ + struct qt602240_finger *finger = data->finger; + struct device *dev = &data->client->dev; + u8 status = message->message[0]; + int x; + int y; + int area; + + /* Check the touch is present on the screen */ + if (!(status & QT602240_DETECT)) { + if (status & QT602240_RELEASE) { + dev_dbg(dev, "[%d] released\n", id); + + finger[id].status = QT602240_RELEASE; + qt602240_input_report(data, id); + } + return; + } + + /* Check only AMP detection */ + if (!(status & (QT602240_PRESS | QT602240_MOVE))) + return; + + x = (message->message[1] << 2) | ((message->message[3] & ~0x3f) >> 6); + y = (message->message[2] << 2) | ((message->message[3] & ~0xf3) >> 2); + area = message->message[4]; + + dev_dbg(dev, "[%d] %s x: %d, y: %d, area: %d\n", id, + status & QT602240_MOVE ? "moved" : "pressed", + x, y, area); + + finger[id].status = status & QT602240_MOVE ? + QT602240_MOVE : QT602240_PRESS; + finger[id].x = x; + finger[id].y = y; + finger[id].area = area; + + qt602240_input_report(data, id); +} + +static irqreturn_t qt602240_interrupt(int irq, void *dev_id) +{ + struct qt602240_data *data = dev_id; + struct qt602240_message message; + struct qt602240_object *object; + struct device *dev = &data->client->dev; + int id; + u8 reportid; + u8 max_reportid; + u8 min_reportid; + + do { + if (qt602240_read_message(data, &message)) { + dev_err(dev, "Failed to read message\n"); + goto end; + } + + reportid = message.reportid; + + /* whether reportid is thing of QT602240_TOUCH_MULTI */ + object = qt602240_get_object(data, QT602240_TOUCH_MULTI); + if (!object) + goto end; + + max_reportid = object->max_reportid; + min_reportid = max_reportid - object->num_report_ids + 1; + id = reportid - min_reportid; + + if (reportid >= min_reportid && reportid <= max_reportid) + qt602240_input_touchevent(data, &message, id); + else + qt602240_dump_message(dev, &message); + } while (reportid != 0xff); + +end: + return IRQ_HANDLED; +} + +static int qt602240_check_reg_init(struct qt602240_data *data) +{ + struct qt602240_object *object; + struct device *dev = &data->client->dev; + int index = 0; + int i, j; + u8 version = data->info.version; + u8 *init_vals; + + switch (version) { + case QT602240_VER_20: + init_vals = (u8 *)init_vals_ver_20; + break; + case QT602240_VER_21: + init_vals = (u8 *)init_vals_ver_21; + break; + case QT602240_VER_22: + init_vals = (u8 *)init_vals_ver_22; + break; + default: + dev_err(dev, "Firmware version %d doesn't support\n", version); + return -EINVAL; + } + + for (i = 0; i < data->info.object_num; i++) { + object = data->object_table + i; + + if (!qt602240_object_writable(object->type)) + continue; + + for (j = 0; j < object->size + 1; j++) + qt602240_write_object(data, object->type, j, + init_vals[index + j]); + + index += object->size + 1; + } + + return 0; +} + +static int qt602240_check_matrix_size(struct qt602240_data *data) +{ + const struct qt602240_platform_data *pdata = data->pdata; + struct device *dev = &data->client->dev; + int mode = -1; + int error; + u8 val; + + dev_dbg(dev, "Number of X lines: %d\n", pdata->x_line); + dev_dbg(dev, "Number of Y lines: %d\n", pdata->y_line); + + switch (pdata->x_line) { + case 0 ... 15: + if (pdata->y_line <= 14) + mode = 0; + break; + case 16: + if (pdata->y_line <= 12) + mode = 1; + if (pdata->y_line == 13 || pdata->y_line == 14) + mode = 0; + break; + case 17: + if (pdata->y_line <= 11) + mode = 2; + if (pdata->y_line == 12 || pdata->y_line == 13) + mode = 1; + break; + case 18: + if (pdata->y_line <= 10) + mode = 3; + if (pdata->y_line == 11 || pdata->y_line == 12) + mode = 2; + break; + case 19: + if (pdata->y_line <= 9) + mode = 4; + if (pdata->y_line == 10 || pdata->y_line == 11) + mode = 3; + break; + case 20: + mode = 4; + } + + if (mode < 0) { + dev_err(dev, "Invalid X/Y lines\n"); + return -EINVAL; + } + + error = qt602240_read_object(data, QT602240_SPT_CTECONFIG, + QT602240_CTE_MODE, &val); + if (error) + return error; + + if (mode == val) + return 0; + + /* Change the CTE configuration */ + qt602240_write_object(data, QT602240_SPT_CTECONFIG, + QT602240_CTE_CTRL, 1); + qt602240_write_object(data, QT602240_SPT_CTECONFIG, + QT602240_CTE_MODE, mode); + qt602240_write_object(data, QT602240_SPT_CTECONFIG, + QT602240_CTE_CTRL, 0); + + return 0; +} + +static int qt602240_make_highchg(struct qt602240_data *data) +{ + struct device *dev = &data->client->dev; + int count = 10; + int error; + u8 val; + + /* Read dummy message to make high CHG pin */ + do { + error = qt602240_read_object(data, QT602240_GEN_MESSAGE, 0, &val); + if (error) + return error; + } while ((val != 0xff) && --count); + + if (!count) { + dev_err(dev, "CHG pin isn't cleared\n"); + return -EBUSY; + } + + return 0; +} + +static void qt602240_handle_pdata(struct qt602240_data *data) +{ + const struct qt602240_platform_data *pdata = data->pdata; + u8 voltage; + + /* Set touchscreen lines */ + qt602240_write_object(data, QT602240_TOUCH_MULTI, QT602240_TOUCH_XSIZE, + pdata->x_line); + qt602240_write_object(data, QT602240_TOUCH_MULTI, QT602240_TOUCH_YSIZE, + pdata->y_line); + + /* Set touchscreen orient */ + qt602240_write_object(data, QT602240_TOUCH_MULTI, QT602240_TOUCH_ORIENT, + pdata->orient); + + /* Set touchscreen burst length */ + qt602240_write_object(data, QT602240_TOUCH_MULTI, + QT602240_TOUCH_BLEN, pdata->blen); + + /* Set touchscreen threshold */ + qt602240_write_object(data, QT602240_TOUCH_MULTI, + QT602240_TOUCH_TCHTHR, pdata->threshold); + + /* Set touchscreen resolution */ + qt602240_write_object(data, QT602240_TOUCH_MULTI, + QT602240_TOUCH_XRANGE_LSB, (pdata->x_size - 1) & 0xff); + qt602240_write_object(data, QT602240_TOUCH_MULTI, + QT602240_TOUCH_XRANGE_MSB, (pdata->x_size - 1) >> 8); + qt602240_write_object(data, QT602240_TOUCH_MULTI, + QT602240_TOUCH_YRANGE_LSB, (pdata->y_size - 1) & 0xff); + qt602240_write_object(data, QT602240_TOUCH_MULTI, + QT602240_TOUCH_YRANGE_MSB, (pdata->y_size - 1) >> 8); + + /* Set touchscreen voltage */ + if (data->info.version >= QT602240_VER_21 && pdata->voltage) { + if (pdata->voltage < QT602240_VOLTAGE_DEFAULT) { + voltage = (QT602240_VOLTAGE_DEFAULT - pdata->voltage) / + QT602240_VOLTAGE_STEP; + voltage = 0xff - voltage + 1; + } else + voltage = (pdata->voltage - QT602240_VOLTAGE_DEFAULT) / + QT602240_VOLTAGE_STEP; + + qt602240_write_object(data, QT602240_SPT_CTECONFIG, + QT602240_CTE_VOLTAGE, voltage); + } +} + +static int qt602240_get_info(struct qt602240_data *data) +{ + struct i2c_client *client = data->client; + struct qt602240_info *info = &data->info; + int error; + u8 val; + + error = qt602240_read_reg(client, QT602240_FAMILY_ID, &val); + if (error) + return error; + info->family_id = val; + + error = qt602240_read_reg(client, QT602240_VARIANT_ID, &val); + if (error) + return error; + info->variant_id = val; + + error = qt602240_read_reg(client, QT602240_VERSION, &val); + if (error) + return error; + info->version = val; + + error = qt602240_read_reg(client, QT602240_BUILD, &val); + if (error) + return error; + info->build = val; + + error = qt602240_read_reg(client, QT602240_OBJECT_NUM, &val); + if (error) + return error; + info->object_num = val; + + return 0; +} + +static int qt602240_get_object_table(struct qt602240_data *data) +{ + int error; + int i; + u16 reg; + u8 reportid = 0; + u8 buf[QT602240_OBJECT_SIZE]; + + for (i = 0; i < data->info.object_num; i++) { + struct qt602240_object *object = data->object_table + i; + + reg = QT602240_OBJECT_START + QT602240_OBJECT_SIZE * i; + error = qt602240_read_object_table(data->client, reg, buf); + if (error) + return error; + + object->type = buf[0]; + object->start_address = (buf[2] << 8) | buf[1]; + object->size = buf[3]; + object->instances = buf[4]; + object->num_report_ids = buf[5]; + + if (object->num_report_ids) { + reportid += object->num_report_ids * + (object->instances + 1); + object->max_reportid = reportid; + } + } + + return 0; +} + +static int qt602240_initialize(struct qt602240_data *data) +{ + struct i2c_client *client = data->client; + struct qt602240_info *info = &data->info; + int error; + u8 val; + + error = qt602240_get_info(data); + if (error) + return error; + + data->object_table = kcalloc(info->object_num, + sizeof(struct qt602240_data), + GFP_KERNEL); + if (!data->object_table) { + dev_err(&client->dev, "Failed to allocate memory\n"); + return -ENOMEM; + } + + /* Get object table information */ + error = qt602240_get_object_table(data); + if (error) + return error; + + /* Check register init values */ + error = qt602240_check_reg_init(data); + if (error) + return error; + + /* Check X/Y matrix size */ + error = qt602240_check_matrix_size(data); + if (error) + return error; + + error = qt602240_make_highchg(data); + if (error) + return error; + + qt602240_handle_pdata(data); + + /* Backup to memory */ + qt602240_write_object(data, QT602240_GEN_COMMAND, + QT602240_COMMAND_BACKUPNV, + QT602240_BACKUP_VALUE); + msleep(QT602240_BACKUP_TIME); + + /* Soft reset */ + qt602240_write_object(data, QT602240_GEN_COMMAND, + QT602240_COMMAND_RESET, 1); + msleep(QT602240_RESET_TIME); + + /* Update matrix size at info struct */ + error = qt602240_read_reg(client, QT602240_MATRIX_X_SIZE, &val); + if (error) + return error; + info->matrix_xsize = val; + + error = qt602240_read_reg(client, QT602240_MATRIX_Y_SIZE, &val); + if (error) + return error; + info->matrix_ysize = val; + + dev_info(&client->dev, + "Family ID: %d Variant ID: %d Version: %d Build: %d\n", + info->family_id, info->variant_id, info->version, + info->build); + + dev_info(&client->dev, + "Matrix X Size: %d Matrix Y Size: %d Object Num: %d\n", + info->matrix_xsize, info->matrix_ysize, + info->object_num); + + return 0; +} + +static ssize_t qt602240_object_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct qt602240_data *data = dev_get_drvdata(dev); + struct qt602240_object *object; + int count = 0; + int i, j; + int error; + u8 val; + + for (i = 0; i < data->info.object_num; i++) { + object = data->object_table + i; + + count += sprintf(buf + count, + "Object Table Element %d(Type %d)\n", + i + 1, object->type); + + if (!qt602240_object_readable(object->type)) { + count += sprintf(buf + count, "\n"); + continue; + } + + for (j = 0; j < object->size + 1; j++) { + error = qt602240_read_object(data, + object->type, j, &val); + if (error) + return error; + + count += sprintf(buf + count, + " Byte %d: 0x%x (%d)\n", j, val, val); + } + + count += sprintf(buf + count, "\n"); + } + + return count; +} + +static int qt602240_load_fw(struct device *dev, const char *fn) +{ + struct qt602240_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + const struct firmware *fw = NULL; + unsigned int frame_size; + unsigned int pos = 0; + int ret; + + ret = request_firmware(&fw, fn, dev); + if (ret) { + dev_err(dev, "Unable to open firmware %s\n", fn); + return ret; + } + + /* Change to the bootloader mode */ + qt602240_write_object(data, QT602240_GEN_COMMAND, + QT602240_COMMAND_RESET, QT602240_BOOT_VALUE); + msleep(QT602240_RESET_TIME); + + /* Change to slave address of bootloader */ + if (client->addr == QT602240_APP_LOW) + client->addr = QT602240_BOOT_LOW; + else + client->addr = QT602240_BOOT_HIGH; + + ret = qt602240_check_bootloader(client, QT602240_WAITING_BOOTLOAD_CMD); + if (ret) + goto out; + + /* Unlock bootloader */ + qt602240_unlock_bootloader(client); + + while (pos < fw->size) { + ret = qt602240_check_bootloader(client, + QT602240_WAITING_FRAME_DATA); + if (ret) + goto out; + + frame_size = ((*(fw->data + pos) << 8) | *(fw->data + pos + 1)); + + /* We should add 2 at frame size as the the firmware data is not + * included the CRC bytes. + */ + frame_size += 2; + + /* Write one frame to device */ + qt602240_fw_write(client, fw->data + pos, frame_size); + + ret = qt602240_check_bootloader(client, + QT602240_FRAME_CRC_PASS); + if (ret) + goto out; + + pos += frame_size; + + dev_dbg(dev, "Updated %d bytes / %zd bytes\n", pos, fw->size); + } + +out: + release_firmware(fw); + + /* Change to slave address of application */ + if (client->addr == QT602240_BOOT_LOW) + client->addr = QT602240_APP_LOW; + else + client->addr = QT602240_APP_HIGH; + + return ret; +} + +static ssize_t qt602240_update_fw_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct qt602240_data *data = dev_get_drvdata(dev); + unsigned int version; + int error; + + if (sscanf(buf, "%u", &version) != 1) { + dev_err(dev, "Invalid values\n"); + return -EINVAL; + } + + if (data->info.version < QT602240_VER_21 || version < QT602240_VER_21) { + dev_err(dev, "FW update supported starting with version 21\n"); + return -EINVAL; + } + + disable_irq(data->irq); + + error = qt602240_load_fw(dev, QT602240_FW_NAME); + if (error) { + dev_err(dev, "The firmware update failed(%d)\n", error); + count = error; + } else { + dev_dbg(dev, "The firmware update succeeded\n"); + + /* Wait for reset */ + msleep(QT602240_FWRESET_TIME); + + kfree(data->object_table); + data->object_table = NULL; + + qt602240_initialize(data); + } + + enable_irq(data->irq); + + return count; +} + +static DEVICE_ATTR(object, 0444, qt602240_object_show, NULL); +static DEVICE_ATTR(update_fw, 0664, NULL, qt602240_update_fw_store); + +static struct attribute *qt602240_attrs[] = { + &dev_attr_object.attr, + &dev_attr_update_fw.attr, + NULL +}; + +static const struct attribute_group qt602240_attr_group = { + .attrs = qt602240_attrs, +}; + +static void qt602240_start(struct qt602240_data *data) +{ + /* Touch enable */ + qt602240_write_object(data, + QT602240_TOUCH_MULTI, QT602240_TOUCH_CTRL, 0x83); +} + +static void qt602240_stop(struct qt602240_data *data) +{ + /* Touch disable */ + qt602240_write_object(data, + QT602240_TOUCH_MULTI, QT602240_TOUCH_CTRL, 0); +} + +static int qt602240_input_open(struct input_dev *dev) +{ + struct qt602240_data *data = input_get_drvdata(dev); + + qt602240_start(data); + + return 0; +} + +static void qt602240_input_close(struct input_dev *dev) +{ + struct qt602240_data *data = input_get_drvdata(dev); + + qt602240_stop(data); +} + +static int __devinit qt602240_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct qt602240_data *data; + struct input_dev *input_dev; + int error; + + if (!client->dev.platform_data) + return -EINVAL; + + data = kzalloc(sizeof(struct qt602240_data), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!data || !input_dev) { + dev_err(&client->dev, "Failed to allocate memory\n"); + error = -ENOMEM; + goto err_free_mem; + } + + input_dev->name = "AT42QT602240/ATMXT224 Touchscreen"; + input_dev->id.bustype = BUS_I2C; + input_dev->dev.parent = &client->dev; + input_dev->open = qt602240_input_open; + input_dev->close = qt602240_input_close; + + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(BTN_TOUCH, input_dev->keybit); + + /* For single touch */ + input_set_abs_params(input_dev, ABS_X, + 0, QT602240_MAX_XC, 0, 0); + input_set_abs_params(input_dev, ABS_Y, + 0, QT602240_MAX_YC, 0, 0); + + /* For multi touch */ + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, + 0, QT602240_MAX_AREA, 0, 0); + input_set_abs_params(input_dev, ABS_MT_POSITION_X, + 0, QT602240_MAX_XC, 0, 0); + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, + 0, QT602240_MAX_YC, 0, 0); + + input_set_drvdata(input_dev, data); + + data->client = client; + data->input_dev = input_dev; + data->pdata = client->dev.platform_data; + data->irq = client->irq; + + i2c_set_clientdata(client, data); + + error = qt602240_initialize(data); + if (error) + goto err_free_object; + + error = request_threaded_irq(client->irq, NULL, qt602240_interrupt, + IRQF_TRIGGER_FALLING, client->dev.driver->name, data); + if (error) { + dev_err(&client->dev, "Failed to register interrupt\n"); + goto err_free_object; + } + + error = input_register_device(input_dev); + if (error) + goto err_free_irq; + + error = sysfs_create_group(&client->dev.kobj, &qt602240_attr_group); + if (error) + goto err_unregister_device; + + return 0; + +err_unregister_device: + input_unregister_device(input_dev); + input_dev = NULL; +err_free_irq: + free_irq(client->irq, data); +err_free_object: + kfree(data->object_table); +err_free_mem: + input_free_device(input_dev); + kfree(data); + return error; +} + +static int __devexit qt602240_remove(struct i2c_client *client) +{ + struct qt602240_data *data = i2c_get_clientdata(client); + + sysfs_remove_group(&client->dev.kobj, &qt602240_attr_group); + free_irq(data->irq, data); + input_unregister_device(data->input_dev); + kfree(data->object_table); + kfree(data); + + return 0; +} + +#ifdef CONFIG_PM +static int qt602240_suspend(struct i2c_client *client, pm_message_t mesg) +{ + struct qt602240_data *data = i2c_get_clientdata(client); + struct input_dev *input_dev = data->input_dev; + + mutex_lock(&input_dev->mutex); + + if (input_dev->users) + qt602240_stop(data); + + mutex_unlock(&input_dev->mutex); + + return 0; +} + +static int qt602240_resume(struct i2c_client *client) +{ + struct qt602240_data *data = i2c_get_clientdata(client); + struct input_dev *input_dev = data->input_dev; + + /* Soft reset */ + qt602240_write_object(data, QT602240_GEN_COMMAND, + QT602240_COMMAND_RESET, 1); + + msleep(QT602240_RESET_TIME); + + mutex_lock(&input_dev->mutex); + + if (input_dev->users) + qt602240_start(data); + + mutex_unlock(&input_dev->mutex); + + return 0; +} +#else +#define qt602240_suspend NULL +#define qt602240_resume NULL +#endif + +static const struct i2c_device_id qt602240_id[] = { + { "qt602240_ts", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, qt602240_id); + +static struct i2c_driver qt602240_driver = { + .driver = { + .name = "qt602240_ts", + .owner = THIS_MODULE, + }, + .probe = qt602240_probe, + .remove = __devexit_p(qt602240_remove), + .suspend = qt602240_suspend, + .resume = qt602240_resume, + .id_table = qt602240_id, +}; + +static int __init qt602240_init(void) +{ + return i2c_add_driver(&qt602240_driver); +} + +static void __exit qt602240_exit(void) +{ + i2c_del_driver(&qt602240_driver); +} + +module_init(qt602240_init); +module_exit(qt602240_exit); + +/* Module information */ +MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>"); +MODULE_DESCRIPTION("AT42QT602240/ATMXT224 Touchscreen driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c new file mode 100644 index 000000000000..656148ec0027 --- /dev/null +++ b/drivers/input/touchscreen/stmpe-ts.c @@ -0,0 +1,397 @@ +/* STMicroelectronics STMPE811 Touchscreen Driver + * + * (C) 2010 Luotao Fu <l.fu@pengutronix.de> + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/workqueue.h> + +#include <linux/mfd/stmpe.h> + +/* Register layouts and functionalities are identical on all stmpexxx variants + * with touchscreen controller + */ +#define STMPE_REG_INT_STA 0x0B +#define STMPE_REG_ADC_CTRL1 0x20 +#define STMPE_REG_ADC_CTRL2 0x21 +#define STMPE_REG_TSC_CTRL 0x40 +#define STMPE_REG_TSC_CFG 0x41 +#define STMPE_REG_FIFO_TH 0x4A +#define STMPE_REG_FIFO_STA 0x4B +#define STMPE_REG_FIFO_SIZE 0x4C +#define STMPE_REG_TSC_DATA_XYZ 0x52 +#define STMPE_REG_TSC_FRACTION_Z 0x56 +#define STMPE_REG_TSC_I_DRIVE 0x58 + +#define OP_MOD_XYZ 0 + +#define STMPE_TSC_CTRL_TSC_EN (1<<0) + +#define STMPE_FIFO_STA_RESET (1<<0) + +#define STMPE_IRQ_TOUCH_DET 0 + +#define SAMPLE_TIME(x) ((x & 0xf) << 4) +#define MOD_12B(x) ((x & 0x1) << 3) +#define REF_SEL(x) ((x & 0x1) << 1) +#define ADC_FREQ(x) (x & 0x3) +#define AVE_CTRL(x) ((x & 0x3) << 6) +#define DET_DELAY(x) ((x & 0x7) << 3) +#define SETTLING(x) (x & 0x7) +#define FRACTION_Z(x) (x & 0x7) +#define I_DRIVE(x) (x & 0x1) +#define OP_MODE(x) ((x & 0x7) << 1) + +#define STMPE_TS_NAME "stmpe-ts" +#define XY_MASK 0xfff + +struct stmpe_touch { + struct stmpe *stmpe; + struct input_dev *idev; + struct delayed_work work; + struct device *dev; + u8 sample_time; + u8 mod_12b; + u8 ref_sel; + u8 adc_freq; + u8 ave_ctrl; + u8 touch_det_delay; + u8 settling; + u8 fraction_z; + u8 i_drive; +}; + +static int __stmpe_reset_fifo(struct stmpe *stmpe) +{ + int ret; + + ret = stmpe_set_bits(stmpe, STMPE_REG_FIFO_STA, + STMPE_FIFO_STA_RESET, STMPE_FIFO_STA_RESET); + if (ret) + return ret; + + return stmpe_set_bits(stmpe, STMPE_REG_FIFO_STA, + STMPE_FIFO_STA_RESET, 0); +} + +static void stmpe_work(struct work_struct *work) +{ + int int_sta; + u32 timeout = 40; + + struct stmpe_touch *ts = + container_of(work, struct stmpe_touch, work.work); + + int_sta = stmpe_reg_read(ts->stmpe, STMPE_REG_INT_STA); + + /* + * touch_det sometimes get desasserted or just get stuck. This appears + * to be a silicon bug, We still have to clearify this with the + * manufacture. As a workaround We release the key anyway if the + * touch_det keeps coming in after 4ms, while the FIFO contains no value + * during the whole time. + */ + while ((int_sta & (1 << STMPE_IRQ_TOUCH_DET)) && (timeout > 0)) { + timeout--; + int_sta = stmpe_reg_read(ts->stmpe, STMPE_REG_INT_STA); + udelay(100); + } + + /* reset the FIFO before we report release event */ + __stmpe_reset_fifo(ts->stmpe); + + input_report_abs(ts->idev, ABS_PRESSURE, 0); + input_sync(ts->idev); +} + +static irqreturn_t stmpe_ts_handler(int irq, void *data) +{ + u8 data_set[4]; + int x, y, z; + struct stmpe_touch *ts = data; + + /* + * Cancel scheduled polling for release if we have new value + * available. Wait if the polling is already running. + */ + cancel_delayed_work_sync(&ts->work); + + /* + * The FIFO sometimes just crashes and stops generating interrupts. This + * appears to be a silicon bug. We still have to clearify this with + * the manufacture. As a workaround we disable the TSC while we are + * collecting data and flush the FIFO after reading + */ + stmpe_set_bits(ts->stmpe, STMPE_REG_TSC_CTRL, + STMPE_TSC_CTRL_TSC_EN, 0); + + stmpe_block_read(ts->stmpe, STMPE_REG_TSC_DATA_XYZ, 4, data_set); + + x = (data_set[0] << 4) | (data_set[1] >> 4); + y = ((data_set[1] & 0xf) << 8) | data_set[2]; + z = data_set[3]; + + input_report_abs(ts->idev, ABS_X, x); + input_report_abs(ts->idev, ABS_Y, y); + input_report_abs(ts->idev, ABS_PRESSURE, z); + input_sync(ts->idev); + + /* flush the FIFO after we have read out our values. */ + __stmpe_reset_fifo(ts->stmpe); + + /* reenable the tsc */ + stmpe_set_bits(ts->stmpe, STMPE_REG_TSC_CTRL, + STMPE_TSC_CTRL_TSC_EN, STMPE_TSC_CTRL_TSC_EN); + + /* start polling for touch_det to detect release */ + schedule_delayed_work(&ts->work, HZ / 50); + + return IRQ_HANDLED; +} + +static int __devinit stmpe_init_hw(struct stmpe_touch *ts) +{ + int ret; + u8 adc_ctrl1, adc_ctrl1_mask, tsc_cfg, tsc_cfg_mask; + struct stmpe *stmpe = ts->stmpe; + struct device *dev = ts->dev; + + ret = stmpe_enable(stmpe, STMPE_BLOCK_TOUCHSCREEN | STMPE_BLOCK_ADC); + if (ret) { + dev_err(dev, "Could not enable clock for ADC and TS\n"); + return ret; + } + + adc_ctrl1 = SAMPLE_TIME(ts->sample_time) | MOD_12B(ts->mod_12b) | + REF_SEL(ts->ref_sel); + adc_ctrl1_mask = SAMPLE_TIME(0xff) | MOD_12B(0xff) | REF_SEL(0xff); + + ret = stmpe_set_bits(stmpe, STMPE_REG_ADC_CTRL1, + adc_ctrl1_mask, adc_ctrl1); + if (ret) { + dev_err(dev, "Could not setup ADC\n"); + return ret; + } + + ret = stmpe_set_bits(stmpe, STMPE_REG_ADC_CTRL2, + ADC_FREQ(0xff), ADC_FREQ(ts->adc_freq)); + if (ret) { + dev_err(dev, "Could not setup ADC\n"); + return ret; + } + + tsc_cfg = AVE_CTRL(ts->ave_ctrl) | DET_DELAY(ts->touch_det_delay) | + SETTLING(ts->settling); + tsc_cfg_mask = AVE_CTRL(0xff) | DET_DELAY(0xff) | SETTLING(0xff); + + ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_CFG, tsc_cfg_mask, tsc_cfg); + if (ret) { + dev_err(dev, "Could not config touch\n"); + return ret; + } + + ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_FRACTION_Z, + FRACTION_Z(0xff), FRACTION_Z(ts->fraction_z)); + if (ret) { + dev_err(dev, "Could not config touch\n"); + return ret; + } + + ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_I_DRIVE, + I_DRIVE(0xff), I_DRIVE(ts->i_drive)); + if (ret) { + dev_err(dev, "Could not config touch\n"); + return ret; + } + + /* set FIFO to 1 for single point reading */ + ret = stmpe_reg_write(stmpe, STMPE_REG_FIFO_TH, 1); + if (ret) { + dev_err(dev, "Could not set FIFO\n"); + return ret; + } + + ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_CTRL, + OP_MODE(0xff), OP_MODE(OP_MOD_XYZ)); + if (ret) { + dev_err(dev, "Could not set mode\n"); + return ret; + } + + return 0; +} + +static int stmpe_ts_open(struct input_dev *dev) +{ + struct stmpe_touch *ts = input_get_drvdata(dev); + int ret = 0; + + ret = __stmpe_reset_fifo(ts->stmpe); + if (ret) + return ret; + + return stmpe_set_bits(ts->stmpe, STMPE_REG_TSC_CTRL, + STMPE_TSC_CTRL_TSC_EN, STMPE_TSC_CTRL_TSC_EN); +} + +static void stmpe_ts_close(struct input_dev *dev) +{ + struct stmpe_touch *ts = input_get_drvdata(dev); + + cancel_delayed_work_sync(&ts->work); + + stmpe_set_bits(ts->stmpe, STMPE_REG_TSC_CTRL, + STMPE_TSC_CTRL_TSC_EN, 0); +} + +static int __devinit stmpe_input_probe(struct platform_device *pdev) +{ + struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent); + struct stmpe_platform_data *pdata = stmpe->pdata; + struct stmpe_touch *ts; + struct input_dev *idev; + struct stmpe_ts_platform_data *ts_pdata = NULL; + int ret = 0; + int ts_irq; + + ts_irq = platform_get_irq_byname(pdev, "FIFO_TH"); + if (ts_irq < 0) + return ts_irq; + + ts = kzalloc(sizeof(*ts), GFP_KERNEL); + if (!ts) + goto err_out; + + idev = input_allocate_device(); + if (!idev) + goto err_free_ts; + + platform_set_drvdata(pdev, ts); + ts->stmpe = stmpe; + ts->idev = idev; + ts->dev = &pdev->dev; + + if (pdata) + ts_pdata = pdata->ts; + + if (ts_pdata) { + ts->sample_time = ts_pdata->sample_time; + ts->mod_12b = ts_pdata->mod_12b; + ts->ref_sel = ts_pdata->ref_sel; + ts->adc_freq = ts_pdata->adc_freq; + ts->ave_ctrl = ts_pdata->ave_ctrl; + ts->touch_det_delay = ts_pdata->touch_det_delay; + ts->settling = ts_pdata->settling; + ts->fraction_z = ts_pdata->fraction_z; + ts->i_drive = ts_pdata->i_drive; + } + + INIT_DELAYED_WORK(&ts->work, stmpe_work); + + ret = request_threaded_irq(ts_irq, NULL, stmpe_ts_handler, + IRQF_ONESHOT, STMPE_TS_NAME, ts); + if (ret) { + dev_err(&pdev->dev, "Failed to request IRQ %d\n", ts_irq); + goto err_free_input; + } + + ret = stmpe_init_hw(ts); + if (ret) + goto err_free_irq; + + idev->name = STMPE_TS_NAME; + idev->id.bustype = BUS_I2C; + idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + idev->open = stmpe_ts_open; + idev->close = stmpe_ts_close; + + input_set_drvdata(idev, ts); + + input_set_abs_params(idev, ABS_X, 0, XY_MASK, 0, 0); + input_set_abs_params(idev, ABS_Y, 0, XY_MASK, 0, 0); + input_set_abs_params(idev, ABS_PRESSURE, 0x0, 0xff, 0, 0); + + ret = input_register_device(idev); + if (ret) { + dev_err(&pdev->dev, "Could not register input device\n"); + goto err_free_irq; + } + + return ret; + +err_free_irq: + free_irq(ts_irq, ts); +err_free_input: + input_free_device(idev); + platform_set_drvdata(pdev, NULL); +err_free_ts: + kfree(ts); +err_out: + return ret; +} + +static int __devexit stmpe_ts_remove(struct platform_device *pdev) +{ + struct stmpe_touch *ts = platform_get_drvdata(pdev); + unsigned int ts_irq = platform_get_irq_byname(pdev, "FIFO_TH"); + + stmpe_disable(ts->stmpe, STMPE_BLOCK_TOUCHSCREEN); + + free_irq(ts_irq, ts); + + platform_set_drvdata(pdev, NULL); + + input_unregister_device(ts->idev); + input_free_device(ts->idev); + + kfree(ts); + + return 0; +} + +static struct platform_driver stmpe_ts_driver = { + .driver = { + .name = STMPE_TS_NAME, + .owner = THIS_MODULE, + }, + .probe = stmpe_input_probe, + .remove = __devexit_p(stmpe_ts_remove), +}; + +static int __init stmpe_ts_init(void) +{ + return platform_driver_register(&stmpe_ts_driver); +} + +module_init(stmpe_ts_init); + +static void __exit stmpe_ts_exit(void) +{ + platform_driver_unregister(&stmpe_ts_driver); +} + +module_exit(stmpe_ts_exit); + +MODULE_AUTHOR("Luotao Fu <l.fu@pengutronix.de>"); +MODULE_DESCRIPTION("STMPEXXX touchscreen driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" STMPE_TS_NAME); diff --git a/drivers/input/touchscreen/tps6507x-ts.c b/drivers/input/touchscreen/tps6507x-ts.c index 5b70a1419b4d..a644d18c04dc 100644 --- a/drivers/input/touchscreen/tps6507x-ts.c +++ b/drivers/input/touchscreen/tps6507x-ts.c @@ -355,9 +355,6 @@ static int __devexit tps6507x_ts_remove(struct platform_device *pdev) struct tps6507x_ts *tsc = tps6507x_dev->ts; struct input_dev *input_dev = tsc->input_dev; - if (!tsc) - return 0; - cancel_delayed_work_sync(&tsc->work); destroy_workqueue(tsc->wq); diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index 567d57215c28..f45f80f6d336 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -95,6 +95,7 @@ struct usbtouch_device_info { int (*get_pkt_len) (unsigned char *pkt, int len); int (*read_data) (struct usbtouch_usb *usbtouch, unsigned char *pkt); + int (*alloc) (struct usbtouch_usb *usbtouch); int (*init) (struct usbtouch_usb *usbtouch); void (*exit) (struct usbtouch_usb *usbtouch); }; @@ -135,7 +136,7 @@ enum { DEVTYPE_JASTEC, DEVTYPE_E2I, DEVTYPE_ZYTRONIC, - DEVTYPE_TC5UH, + DEVTYPE_TC45USB, DEVTYPE_NEXIO, }; @@ -222,8 +223,11 @@ static const struct usb_device_id usbtouch_devices[] = { {USB_DEVICE(0x14c8, 0x0003), .driver_info = DEVTYPE_ZYTRONIC}, #endif -#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC5UH - {USB_DEVICE(0x0664, 0x0309), .driver_info = DEVTYPE_TC5UH}, +#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB + /* TC5UH */ + {USB_DEVICE(0x0664, 0x0309), .driver_info = DEVTYPE_TC45USB}, + /* TC4UM */ + {USB_DEVICE(0x0664, 0x0306), .driver_info = DEVTYPE_TC45USB}, #endif #ifdef CONFIG_TOUCHSCREEN_USB_NEXIO @@ -507,7 +511,7 @@ static int dmc_tsc10_init(struct usbtouch_usb *usbtouch) int ret = -ENOMEM; unsigned char *buf; - buf = kmalloc(2, GFP_KERNEL); + buf = kmalloc(2, GFP_NOIO); if (!buf) goto err_nobuf; /* reset */ @@ -574,10 +578,10 @@ static int irtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt) #endif /***************************************************************************** - * ET&T TC5UH part + * ET&T TC5UH/TC4UM part */ -#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC5UH -static int tc5uh_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB +static int tc45usb_read_data(struct usbtouch_usb *dev, unsigned char *pkt) { dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1]; dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3]; @@ -732,11 +736,43 @@ static void nexio_ack_complete(struct urb *urb) { } +static int nexio_alloc(struct usbtouch_usb *usbtouch) +{ + struct nexio_priv *priv; + int ret = -ENOMEM; + + usbtouch->priv = kmalloc(sizeof(struct nexio_priv), GFP_KERNEL); + if (!usbtouch->priv) + goto out_buf; + + priv = usbtouch->priv; + + priv->ack_buf = kmemdup(nexio_ack_pkt, sizeof(nexio_ack_pkt), + GFP_KERNEL); + if (!priv->ack_buf) + goto err_priv; + + priv->ack = usb_alloc_urb(0, GFP_KERNEL); + if (!priv->ack) { + dbg("%s - usb_alloc_urb failed: usbtouch->ack", __func__); + goto err_ack_buf; + } + + return 0; + +err_ack_buf: + kfree(priv->ack_buf); +err_priv: + kfree(priv); +out_buf: + return ret; +} + static int nexio_init(struct usbtouch_usb *usbtouch) { struct usb_device *dev = interface_to_usbdev(usbtouch->interface); struct usb_host_interface *interface = usbtouch->interface->cur_altsetting; - struct nexio_priv *priv; + struct nexio_priv *priv = usbtouch->priv; int ret = -ENOMEM; int actual_len, i; unsigned char *buf; @@ -755,7 +791,7 @@ static int nexio_init(struct usbtouch_usb *usbtouch) if (!input_ep || !output_ep) return -ENXIO; - buf = kmalloc(NEXIO_BUFSIZE, GFP_KERNEL); + buf = kmalloc(NEXIO_BUFSIZE, GFP_NOIO); if (!buf) goto out_buf; @@ -787,11 +823,11 @@ static int nexio_init(struct usbtouch_usb *usbtouch) switch (buf[0]) { case 0x83: /* firmware version */ if (!firmware_ver) - firmware_ver = kstrdup(&buf[2], GFP_KERNEL); + firmware_ver = kstrdup(&buf[2], GFP_NOIO); break; case 0x84: /* device name */ if (!device_name) - device_name = kstrdup(&buf[2], GFP_KERNEL); + device_name = kstrdup(&buf[2], GFP_NOIO); break; } } @@ -802,36 +838,11 @@ static int nexio_init(struct usbtouch_usb *usbtouch) kfree(firmware_ver); kfree(device_name); - /* prepare ACK URB */ - ret = -ENOMEM; - - usbtouch->priv = kmalloc(sizeof(struct nexio_priv), GFP_KERNEL); - if (!usbtouch->priv) - goto out_buf; - - priv = usbtouch->priv; - - priv->ack_buf = kmemdup(nexio_ack_pkt, sizeof(nexio_ack_pkt), - GFP_KERNEL); - if (!priv->ack_buf) - goto err_priv; - - priv->ack = usb_alloc_urb(0, GFP_KERNEL); - if (!priv->ack) { - dbg("%s - usb_alloc_urb failed: usbtouch->ack", __func__); - goto err_ack_buf; - } - usb_fill_bulk_urb(priv->ack, dev, usb_sndbulkpipe(dev, output_ep), priv->ack_buf, sizeof(nexio_ack_pkt), nexio_ack_complete, usbtouch); ret = 0; - goto out_buf; -err_ack_buf: - kfree(priv->ack_buf); -err_priv: - kfree(priv); out_buf: kfree(buf); return ret; @@ -849,29 +860,32 @@ static void nexio_exit(struct usbtouch_usb *usbtouch) static int nexio_read_data(struct usbtouch_usb *usbtouch, unsigned char *pkt) { - int x, y, begin_x, begin_y, end_x, end_y, w, h, ret; struct nexio_touch_packet *packet = (void *) pkt; struct nexio_priv *priv = usbtouch->priv; + unsigned int data_len = be16_to_cpu(packet->data_len); + unsigned int x_len = be16_to_cpu(packet->x_len); + unsigned int y_len = be16_to_cpu(packet->y_len); + int x, y, begin_x, begin_y, end_x, end_y, w, h, ret; /* got touch data? */ if ((pkt[0] & 0xe0) != 0xe0) return 0; - if (be16_to_cpu(packet->data_len) > 0xff) - packet->data_len = cpu_to_be16(be16_to_cpu(packet->data_len) - 0x100); - if (be16_to_cpu(packet->x_len) > 0xff) - packet->x_len = cpu_to_be16(be16_to_cpu(packet->x_len) - 0x80); + if (data_len > 0xff) + data_len -= 0x100; + if (x_len > 0xff) + x_len -= 0x80; /* send ACK */ ret = usb_submit_urb(priv->ack, GFP_ATOMIC); if (!usbtouch->type->max_xc) { - usbtouch->type->max_xc = 2 * be16_to_cpu(packet->x_len); - input_set_abs_params(usbtouch->input, ABS_X, 0, - 2 * be16_to_cpu(packet->x_len), 0, 0); - usbtouch->type->max_yc = 2 * be16_to_cpu(packet->y_len); - input_set_abs_params(usbtouch->input, ABS_Y, 0, - 2 * be16_to_cpu(packet->y_len), 0, 0); + usbtouch->type->max_xc = 2 * x_len; + input_set_abs_params(usbtouch->input, ABS_X, + 0, usbtouch->type->max_xc, 0, 0); + usbtouch->type->max_yc = 2 * y_len; + input_set_abs_params(usbtouch->input, ABS_Y, + 0, usbtouch->type->max_yc, 0, 0); } /* * The device reports state of IR sensors on X and Y axes. @@ -881,22 +895,21 @@ static int nexio_read_data(struct usbtouch_usb *usbtouch, unsigned char *pkt) * it's disabled (and untested) here as there's no X driver for that. */ begin_x = end_x = begin_y = end_y = -1; - for (x = 0; x < be16_to_cpu(packet->x_len); x++) { + for (x = 0; x < x_len; x++) { if (begin_x == -1 && packet->data[x] > NEXIO_THRESHOLD) { begin_x = x; continue; } if (end_x == -1 && begin_x != -1 && packet->data[x] < NEXIO_THRESHOLD) { end_x = x - 1; - for (y = be16_to_cpu(packet->x_len); - y < be16_to_cpu(packet->data_len); y++) { + for (y = x_len; y < data_len; y++) { if (begin_y == -1 && packet->data[y] > NEXIO_THRESHOLD) { - begin_y = y - be16_to_cpu(packet->x_len); + begin_y = y - x_len; continue; } if (end_y == -1 && begin_y != -1 && packet->data[y] < NEXIO_THRESHOLD) { - end_y = y - 1 - be16_to_cpu(packet->x_len); + end_y = y - 1 - x_len; w = end_x - begin_x; h = end_y - begin_y; #if 0 @@ -1104,14 +1117,14 @@ static struct usbtouch_device_info usbtouch_dev_info[] = { }, #endif -#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC5UH - [DEVTYPE_TC5UH] = { +#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB + [DEVTYPE_TC45USB] = { .min_xc = 0x0, .max_xc = 0x0fff, .min_yc = 0x0, .max_yc = 0x0fff, .rept_size = 5, - .read_data = tc5uh_read_data, + .read_data = tc45usb_read_data, }, #endif @@ -1120,6 +1133,7 @@ static struct usbtouch_device_info usbtouch_dev_info[] = { .rept_size = 1024, .irq_always = true, .read_data = nexio_read_data, + .alloc = nexio_alloc, .init = nexio_init, .exit = nexio_exit, }, @@ -1263,6 +1277,7 @@ static void usbtouch_irq(struct urb *urb) usbtouch->type->process_pkt(usbtouch, usbtouch->data, urb->actual_length); exit: + usb_mark_last_busy(interface_to_usbdev(usbtouch->interface)); retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) err("%s - usb_submit_urb failed with result: %d", @@ -1272,25 +1287,89 @@ exit: static int usbtouch_open(struct input_dev *input) { struct usbtouch_usb *usbtouch = input_get_drvdata(input); + int r; usbtouch->irq->dev = interface_to_usbdev(usbtouch->interface); + r = usb_autopm_get_interface(usbtouch->interface) ? -EIO : 0; + if (r < 0) + goto out; + if (!usbtouch->type->irq_always) { - if (usb_submit_urb(usbtouch->irq, GFP_KERNEL)) - return -EIO; + if (usb_submit_urb(usbtouch->irq, GFP_KERNEL)) { + r = -EIO; + goto out_put; + } } - return 0; + usbtouch->interface->needs_remote_wakeup = 1; +out_put: + usb_autopm_put_interface(usbtouch->interface); +out: + return r; } static void usbtouch_close(struct input_dev *input) { struct usbtouch_usb *usbtouch = input_get_drvdata(input); + int r; if (!usbtouch->type->irq_always) usb_kill_urb(usbtouch->irq); + r = usb_autopm_get_interface(usbtouch->interface); + usbtouch->interface->needs_remote_wakeup = 0; + if (!r) + usb_autopm_put_interface(usbtouch->interface); } +static int usbtouch_suspend +(struct usb_interface *intf, pm_message_t message) +{ + struct usbtouch_usb *usbtouch = usb_get_intfdata(intf); + + usb_kill_urb(usbtouch->irq); + + return 0; +} + +static int usbtouch_resume(struct usb_interface *intf) +{ + struct usbtouch_usb *usbtouch = usb_get_intfdata(intf); + struct input_dev *input = usbtouch->input; + int result = 0; + + mutex_lock(&input->mutex); + if (input->users || usbtouch->type->irq_always) + result = usb_submit_urb(usbtouch->irq, GFP_NOIO); + mutex_unlock(&input->mutex); + + return result; +} + +static int usbtouch_reset_resume(struct usb_interface *intf) +{ + struct usbtouch_usb *usbtouch = usb_get_intfdata(intf); + struct input_dev *input = usbtouch->input; + int err = 0; + + /* reinit the device */ + if (usbtouch->type->init) { + err = usbtouch->type->init(usbtouch); + if (err) { + dbg("%s - type->init() failed, err: %d", + __func__, err); + return err; + } + } + + /* restart IO if needed */ + mutex_lock(&input->mutex); + if (input->users) + err = usb_submit_urb(usbtouch->irq, GFP_NOIO); + mutex_unlock(&input->mutex); + + return err; +} static void usbtouch_free_buffers(struct usb_device *udev, struct usbtouch_usb *usbtouch) @@ -1411,12 +1490,21 @@ static int usbtouch_probe(struct usb_interface *intf, usbtouch->irq->transfer_dma = usbtouch->data_dma; usbtouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - /* device specific init */ + /* device specific allocations */ + if (type->alloc) { + err = type->alloc(usbtouch); + if (err) { + dbg("%s - type->alloc() failed, err: %d", __func__, err); + goto out_free_urb; + } + } + + /* device specific initialisation*/ if (type->init) { err = type->init(usbtouch); if (err) { dbg("%s - type->init() failed, err: %d", __func__, err); - goto out_free_urb; + goto out_do_exit; } } @@ -1429,8 +1517,11 @@ static int usbtouch_probe(struct usb_interface *intf, usb_set_intfdata(intf, usbtouch); if (usbtouch->type->irq_always) { + /* this can't fail */ + usb_autopm_get_interface(intf); err = usb_submit_urb(usbtouch->irq, GFP_KERNEL); if (err) { + usb_autopm_put_interface(intf); err("%s - usb_submit_urb failed with result: %d", __func__, err); goto out_unregister_input; @@ -1481,7 +1572,11 @@ static struct usb_driver usbtouch_driver = { .name = "usbtouchscreen", .probe = usbtouch_probe, .disconnect = usbtouch_disconnect, + .suspend = usbtouch_suspend, + .resume = usbtouch_resume, + .reset_resume = usbtouch_reset_resume, .id_table = usbtouch_devices, + .supports_autosuspend = 1, }; static int __init usbtouch_init(void) |