diff options
Diffstat (limited to 'drivers/input/touchscreen/edt-ft5x06.c')
| -rw-r--r-- | drivers/input/touchscreen/edt-ft5x06.c | 173 |
1 files changed, 130 insertions, 43 deletions
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index 5bf63f76ddda..c53a3d7239e7 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -70,8 +70,10 @@ #define EDT_RAW_DATA_DELAY 1000 /* usec */ enum edt_ver { - M06, - M09, + EDT_M06, + EDT_M09, + EDT_M12, + GENERIC_FT, }; struct edt_reg_addr { @@ -179,14 +181,16 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id) int error; switch (tsdata->version) { - case M06: + case EDT_M06: cmd = 0xf9; /* tell the controller to send touch data */ offset = 5; /* where the actual touch data starts */ tplen = 4; /* data comes in so called frames */ crclen = 1; /* length of the crc data */ break; - case M09: + case EDT_M09: + case EDT_M12: + case GENERIC_FT: cmd = 0x0; offset = 3; tplen = 6; @@ -209,8 +213,8 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id) goto out; } - /* M09 does not send header or CRC */ - if (tsdata->version == M06) { + /* M09/M12 does not send header or CRC */ + if (tsdata->version == EDT_M06) { if (rdbuf[0] != 0xaa || rdbuf[1] != 0xaa || rdbuf[2] != datalen) { dev_err_ratelimited(dev, @@ -233,7 +237,7 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id) continue; /* M06 sometimes sends bogus coordinates in TOUCH_DOWN */ - if (tsdata->version == M06 && type == TOUCH_EVENT_DOWN) + if (tsdata->version == EDT_M06 && type == TOUCH_EVENT_DOWN) continue; x = ((buf[0] << 8) | buf[1]) & 0x0fff; @@ -264,14 +268,16 @@ static int edt_ft5x06_register_write(struct edt_ft5x06_ts_data *tsdata, u8 wrbuf[4]; switch (tsdata->version) { - case M06: + case EDT_M06: wrbuf[0] = tsdata->factory_mode ? 0xf3 : 0xfc; wrbuf[1] = tsdata->factory_mode ? addr & 0x7f : addr & 0x3f; wrbuf[2] = value; wrbuf[3] = wrbuf[0] ^ wrbuf[1] ^ wrbuf[2]; return edt_ft5x06_ts_readwrite(tsdata->client, 4, wrbuf, 0, NULL); - case M09: + case EDT_M09: + case EDT_M12: + case GENERIC_FT: wrbuf[0] = addr; wrbuf[1] = value; @@ -290,7 +296,7 @@ static int edt_ft5x06_register_read(struct edt_ft5x06_ts_data *tsdata, int error; switch (tsdata->version) { - case M06: + case EDT_M06: wrbuf[0] = tsdata->factory_mode ? 0xf3 : 0xfc; wrbuf[1] = tsdata->factory_mode ? addr & 0x7f : addr & 0x3f; wrbuf[1] |= tsdata->factory_mode ? 0x80 : 0x40; @@ -309,7 +315,9 @@ static int edt_ft5x06_register_read(struct edt_ft5x06_ts_data *tsdata, } break; - case M09: + case EDT_M09: + case EDT_M12: + case GENERIC_FT: wrbuf[0] = addr; error = edt_ft5x06_ts_readwrite(tsdata->client, 1, wrbuf, 1, rdbuf); @@ -368,11 +376,13 @@ static ssize_t edt_ft5x06_setting_show(struct device *dev, } switch (tsdata->version) { - case M06: + case EDT_M06: addr = attr->addr_m06; break; - case M09: + case EDT_M09: + case EDT_M12: + case GENERIC_FT: addr = attr->addr_m09; break; @@ -437,11 +447,13 @@ static ssize_t edt_ft5x06_setting_store(struct device *dev, } switch (tsdata->version) { - case M06: + case EDT_M06: addr = attr->addr_m06; break; - case M09: + case EDT_M09: + case EDT_M12: + case GENERIC_FT: addr = attr->addr_m09; break; @@ -466,14 +478,18 @@ out: return error ?: count; } +/* m06, m09: range 0-31, m12: range 0-5 */ static EDT_ATTR(gain, S_IWUSR | S_IRUGO, WORK_REGISTER_GAIN, M09_REGISTER_GAIN, 0, 31); +/* m06, m09: range 0-31, m12: range 0-16 */ static EDT_ATTR(offset, S_IWUSR | S_IRUGO, WORK_REGISTER_OFFSET, M09_REGISTER_OFFSET, 0, 31); +/* m06: range 20 to 80, m09: range 0 to 30, m12: range 1 to 255... */ static EDT_ATTR(threshold, S_IWUSR | S_IRUGO, WORK_REGISTER_THRESHOLD, - M09_REGISTER_THRESHOLD, 0, 80); + M09_REGISTER_THRESHOLD, 0, 255); +/* m06: range 3 to 14, m12: (0x64: 100Hz) */ static EDT_ATTR(report_rate, S_IWUSR | S_IRUGO, WORK_REGISTER_REPORT_RATE, - NO_REGISTER, 3, 14); + NO_REGISTER, 0, 255); static struct attribute *edt_ft5x06_attrs[] = { &edt_ft5x06_attr_gain.dattr.attr, @@ -508,7 +524,7 @@ static int edt_ft5x06_factory_mode(struct edt_ft5x06_ts_data *tsdata) } /* mode register is 0x3c when in the work mode */ - if (tsdata->version == M09) + if (tsdata->version != EDT_M06) goto m09_out; error = edt_ft5x06_register_write(tsdata, WORK_REGISTER_OPMODE, 0x03); @@ -545,7 +561,7 @@ err_out: return error; m09_out: - dev_err(&client->dev, "No factory mode support for M09\n"); + dev_err(&client->dev, "No factory mode support for M09/M12/GENERIC_FT\n"); return -EINVAL; } @@ -770,16 +786,17 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client, * to have garbage in there */ memset(rdbuf, 0, sizeof(rdbuf)); - error = edt_ft5x06_ts_readwrite(client, 1, "\xbb", + error = edt_ft5x06_ts_readwrite(client, 1, "\xBB", EDT_NAME_LEN - 1, rdbuf); if (error) return error; - /* if we find something consistent, stay with that assumption - * at least M09 won't send 3 bytes here + /* Probe content for something consistent. + * M06 starts with a response byte, M12 gives the data directly. + * M09/Generic does not provide model number information. */ - if (!(strncasecmp(rdbuf + 1, "EP0", 3))) { - tsdata->version = M06; + if (!strncasecmp(rdbuf + 1, "EP0", 3)) { + tsdata->version = EDT_M06; /* remove last '$' end marker */ rdbuf[EDT_NAME_LEN - 1] = '\0'; @@ -792,9 +809,31 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client, *p++ = '\0'; strlcpy(model_name, rdbuf + 1, EDT_NAME_LEN); strlcpy(fw_version, p ? p : "", EDT_NAME_LEN); + } else if (!strncasecmp(rdbuf, "EP0", 3)) { + tsdata->version = EDT_M12; + + /* remove last '$' end marker */ + rdbuf[EDT_NAME_LEN - 2] = '\0'; + if (rdbuf[EDT_NAME_LEN - 3] == '$') + rdbuf[EDT_NAME_LEN - 3] = '\0'; + + /* look for Model/Version separator */ + p = strchr(rdbuf, '*'); + if (p) + *p++ = '\0'; + strlcpy(model_name, rdbuf, EDT_NAME_LEN); + strlcpy(fw_version, p ? p : "", EDT_NAME_LEN); } else { - /* since there are only two versions around (M06, M09) */ - tsdata->version = M09; + /* If it is not an EDT M06/M12 touchscreen, then the model + * detection is a bit hairy. The different ft5x06 + * firmares around don't reliably implement the + * identification registers. Well, we'll take a shot. + * + * The main difference between generic focaltec based + * touches and EDT M09 is that we know how to retrieve + * the max coordinates for the latter. + */ + tsdata->version = GENERIC_FT; error = edt_ft5x06_ts_readwrite(client, 1, "\xA6", 2, rdbuf); @@ -808,8 +847,34 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client, if (error) return error; - snprintf(model_name, EDT_NAME_LEN, "EP0%i%i0M09", - rdbuf[0] >> 4, rdbuf[0] & 0x0F); + /* This "model identification" is not exact. Unfortunately + * not all firmwares for the ft5x06 put useful values in + * the identification registers. + */ + switch (rdbuf[0]) { + case 0x35: /* EDT EP0350M09 */ + case 0x43: /* EDT EP0430M09 */ + case 0x50: /* EDT EP0500M09 */ + case 0x57: /* EDT EP0570M09 */ + case 0x70: /* EDT EP0700M09 */ + tsdata->version = EDT_M09; + snprintf(model_name, EDT_NAME_LEN, "EP0%i%i0M09", + rdbuf[0] >> 4, rdbuf[0] & 0x0F); + break; + case 0xa1: /* EDT EP1010ML00 */ + tsdata->version = EDT_M09; + snprintf(model_name, EDT_NAME_LEN, "EP%i%i0ML00", + rdbuf[0] >> 4, rdbuf[0] & 0x0F); + break; + case 0x5a: /* Solomon Goldentek Display */ + snprintf(model_name, EDT_NAME_LEN, "GKTW50SCED1R0"); + break; + default: + snprintf(model_name, EDT_NAME_LEN, + "generic ft5x06 (%02x)", + rdbuf[0]); + break; + } } return 0; @@ -853,8 +918,17 @@ edt_ft5x06_ts_get_parameters(struct edt_ft5x06_ts_data *tsdata) if (reg_addr->reg_report_rate != NO_REGISTER) tsdata->report_rate = edt_ft5x06_register_read(tsdata, reg_addr->reg_report_rate); - tsdata->num_x = edt_ft5x06_register_read(tsdata, reg_addr->reg_num_x); - tsdata->num_y = edt_ft5x06_register_read(tsdata, reg_addr->reg_num_y); + if (tsdata->version == EDT_M06 || + tsdata->version == EDT_M09 || + tsdata->version == EDT_M12) { + tsdata->num_x = edt_ft5x06_register_read(tsdata, + reg_addr->reg_num_x); + tsdata->num_y = edt_ft5x06_register_read(tsdata, + reg_addr->reg_num_y); + } else { + tsdata->num_x = -1; + tsdata->num_y = -1; + } } static void @@ -863,7 +937,7 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata) struct edt_reg_addr *reg_addr = &tsdata->reg_addr; switch (tsdata->version) { - case M06: + case EDT_M06: reg_addr->reg_threshold = WORK_REGISTER_THRESHOLD; reg_addr->reg_report_rate = WORK_REGISTER_REPORT_RATE; reg_addr->reg_gain = WORK_REGISTER_GAIN; @@ -872,7 +946,8 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata) reg_addr->reg_num_y = WORK_REGISTER_NUM_Y; break; - case M09: + case EDT_M09: + case EDT_M12: reg_addr->reg_threshold = M09_REGISTER_THRESHOLD; reg_addr->reg_report_rate = NO_REGISTER; reg_addr->reg_gain = M09_REGISTER_GAIN; @@ -880,6 +955,13 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata) reg_addr->reg_num_x = M09_REGISTER_NUM_X; reg_addr->reg_num_y = M09_REGISTER_NUM_Y; break; + + case GENERIC_FT: + /* this is a guesswork */ + reg_addr->reg_threshold = M09_REGISTER_THRESHOLD; + reg_addr->reg_gain = M09_REGISTER_GAIN; + reg_addr->reg_offset = M09_REGISTER_OFFSET; + break; } } @@ -969,10 +1051,20 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, input->id.bustype = BUS_I2C; input->dev.parent = &client->dev; - input_set_abs_params(input, ABS_MT_POSITION_X, - 0, tsdata->num_x * 64 - 1, 0, 0); - input_set_abs_params(input, ABS_MT_POSITION_Y, - 0, tsdata->num_y * 64 - 1, 0, 0); + if (tsdata->version == EDT_M06 || + tsdata->version == EDT_M09 || + tsdata->version == EDT_M12) { + input_set_abs_params(input, ABS_MT_POSITION_X, + 0, tsdata->num_x * 64 - 1, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, + 0, tsdata->num_y * 64 - 1, 0, 0); + } else { + /* Unknown maximum values. Specify via devicetree */ + input_set_abs_params(input, ABS_MT_POSITION_X, + 0, 65535, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, + 0, 65535, 0, 0); + } touchscreen_parse_properties(input, true, &tsdata->prop); @@ -998,13 +1090,13 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, return error; } - error = sysfs_create_group(&client->dev.kobj, &edt_ft5x06_attr_group); + error = devm_device_add_group(&client->dev, &edt_ft5x06_attr_group); if (error) return error; error = input_register_device(input); if (error) - goto err_remove_attrs; + return error; edt_ft5x06_ts_prepare_debugfs(tsdata, dev_driver_string(&client->dev)); device_init_wakeup(&client->dev, 1); @@ -1016,10 +1108,6 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, tsdata->reset_gpio ? desc_to_gpio(tsdata->reset_gpio) : -1); return 0; - -err_remove_attrs: - sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group); - return error; } static int edt_ft5x06_ts_remove(struct i2c_client *client) @@ -1027,7 +1115,6 @@ static int edt_ft5x06_ts_remove(struct i2c_client *client) struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client); edt_ft5x06_ts_teardown_debugfs(tsdata); - sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group); return 0; } |