summaryrefslogtreecommitdiff
path: root/drivers/iio/chemical
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio/chemical')
-rw-r--r--drivers/iio/chemical/Kconfig23
-rw-r--r--drivers/iio/chemical/Makefile3
-rw-r--r--drivers/iio/chemical/bme680.h96
-rw-r--r--drivers/iio/chemical/bme680_core.c959
-rw-r--r--drivers/iio/chemical/bme680_i2c.c85
-rw-r--r--drivers/iio/chemical/bme680_spi.c125
6 files changed, 1291 insertions, 0 deletions
diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig
index 5cb5be7612b4..b8e005be4f87 100644
--- a/drivers/iio/chemical/Kconfig
+++ b/drivers/iio/chemical/Kconfig
@@ -21,6 +21,29 @@ config ATLAS_PH_SENSOR
To compile this driver as module, choose M here: the
module will be called atlas-ph-sensor.
+config BME680
+ tristate "Bosch Sensortec BME680 sensor driver"
+ depends on (I2C || SPI)
+ select REGMAP
+ select BME680_I2C if I2C
+ select BME680_SPI if SPI
+ help
+ Say yes here to build support for Bosch Sensortec BME680 sensor with
+ temperature, pressure, humidity and gas sensing capability.
+
+ This driver can also be built as a module. If so, the module for I2C
+ would be called bme680_i2c and bme680_spi for SPI support.
+
+config BME680_I2C
+ tristate
+ depends on I2C && BME680
+ select REGMAP_I2C
+
+config BME680_SPI
+ tristate
+ depends on SPI && BME680
+ select REGMAP_SPI
+
config CCS811
tristate "AMS CCS811 VOC sensor"
depends on I2C
diff --git a/drivers/iio/chemical/Makefile b/drivers/iio/chemical/Makefile
index a629b29d1e0b..2f4c4ba4d781 100644
--- a/drivers/iio/chemical/Makefile
+++ b/drivers/iio/chemical/Makefile
@@ -4,6 +4,9 @@
# When adding new entries keep the list in alphabetical order
obj-$(CONFIG_ATLAS_PH_SENSOR) += atlas-ph-sensor.o
+obj-$(CONFIG_BME680) += bme680_core.o
+obj-$(CONFIG_BME680_I2C) += bme680_i2c.o
+obj-$(CONFIG_BME680_SPI) += bme680_spi.o
obj-$(CONFIG_CCS811) += ccs811.o
obj-$(CONFIG_IAQCORE) += ams-iaq-core.o
obj-$(CONFIG_VZ89X) += vz89x.o
diff --git a/drivers/iio/chemical/bme680.h b/drivers/iio/chemical/bme680.h
new file mode 100644
index 000000000000..e049323f209a
--- /dev/null
+++ b/drivers/iio/chemical/bme680.h
@@ -0,0 +1,96 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef BME680_H_
+#define BME680_H_
+
+#define BME680_REG_CHIP_I2C_ID 0xD0
+#define BME680_REG_CHIP_SPI_ID 0x50
+#define BME680_CHIP_ID_VAL 0x61
+#define BME680_REG_SOFT_RESET_I2C 0xE0
+#define BME680_REG_SOFT_RESET_SPI 0x60
+#define BME680_CMD_SOFTRESET 0xB6
+#define BME680_REG_STATUS 0x73
+#define BME680_SPI_MEM_PAGE_BIT BIT(4)
+#define BME680_SPI_MEM_PAGE_1_VAL 1
+
+#define BME680_REG_TEMP_MSB 0x22
+#define BME680_REG_PRESS_MSB 0x1F
+#define BM6880_REG_HUMIDITY_MSB 0x25
+#define BME680_REG_GAS_MSB 0x2A
+#define BME680_REG_GAS_R_LSB 0x2B
+#define BME680_GAS_STAB_BIT BIT(4)
+
+#define BME680_REG_CTRL_HUMIDITY 0x72
+#define BME680_OSRS_HUMIDITY_MASK GENMASK(2, 0)
+
+#define BME680_REG_CTRL_MEAS 0x74
+#define BME680_OSRS_TEMP_MASK GENMASK(7, 5)
+#define BME680_OSRS_PRESS_MASK GENMASK(4, 2)
+#define BME680_MODE_MASK GENMASK(1, 0)
+
+#define BME680_MODE_FORCED 1
+#define BME680_MODE_SLEEP 0
+
+#define BME680_REG_CONFIG 0x75
+#define BME680_FILTER_MASK GENMASK(4, 2)
+#define BME680_FILTER_COEFF_VAL BIT(1)
+
+/* TEMP/PRESS/HUMID reading skipped */
+#define BME680_MEAS_SKIPPED 0x8000
+
+#define BME680_MAX_OVERFLOW_VAL 0x40000000
+#define BME680_HUM_REG_SHIFT_VAL 4
+#define BME680_BIT_H1_DATA_MSK 0x0F
+
+#define BME680_REG_RES_HEAT_RANGE 0x02
+#define BME680_RHRANGE_MSK 0x30
+#define BME680_REG_RES_HEAT_VAL 0x00
+#define BME680_REG_RANGE_SW_ERR 0x04
+#define BME680_RSERROR_MSK 0xF0
+#define BME680_REG_RES_HEAT_0 0x5A
+#define BME680_REG_GAS_WAIT_0 0x64
+#define BME680_GAS_RANGE_MASK 0x0F
+#define BME680_ADC_GAS_RES_SHIFT 6
+#define BME680_AMB_TEMP 25
+
+#define BME680_REG_CTRL_GAS_1 0x71
+#define BME680_RUN_GAS_MASK BIT(4)
+#define BME680_NB_CONV_MASK GENMASK(3, 0)
+#define BME680_RUN_GAS_EN_BIT BIT(4)
+#define BME680_NB_CONV_0_VAL 0
+
+#define BME680_REG_MEAS_STAT_0 0x1D
+#define BME680_GAS_MEAS_BIT BIT(6)
+
+/* Calibration Parameters */
+#define BME680_T2_LSB_REG 0x8A
+#define BME680_T3_REG 0x8C
+#define BME680_P1_LSB_REG 0x8E
+#define BME680_P2_LSB_REG 0x90
+#define BME680_P3_REG 0x92
+#define BME680_P4_LSB_REG 0x94
+#define BME680_P5_LSB_REG 0x96
+#define BME680_P7_REG 0x98
+#define BME680_P6_REG 0x99
+#define BME680_P8_LSB_REG 0x9C
+#define BME680_P9_LSB_REG 0x9E
+#define BME680_P10_REG 0xA0
+#define BME680_H2_LSB_REG 0xE2
+#define BME680_H2_MSB_REG 0xE1
+#define BME680_H1_MSB_REG 0xE3
+#define BME680_H1_LSB_REG 0xE2
+#define BME680_H3_REG 0xE4
+#define BME680_H4_REG 0xE5
+#define BME680_H5_REG 0xE6
+#define BME680_H6_REG 0xE7
+#define BME680_H7_REG 0xE8
+#define BME680_T1_LSB_REG 0xE9
+#define BME680_GH2_LSB_REG 0xEB
+#define BME680_GH1_REG 0xED
+#define BME680_GH3_REG 0xEE
+
+extern const struct regmap_config bme680_regmap_config;
+
+int bme680_core_probe(struct device *dev, struct regmap *regmap,
+ const char *name);
+
+#endif /* BME680_H_ */
diff --git a/drivers/iio/chemical/bme680_core.c b/drivers/iio/chemical/bme680_core.c
new file mode 100644
index 000000000000..7d9bb62baa3f
--- /dev/null
+++ b/drivers/iio/chemical/bme680_core.c
@@ -0,0 +1,959 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Bosch BME680 - Temperature, Pressure, Humidity & Gas Sensor
+ *
+ * Copyright (C) 2017 - 2018 Bosch Sensortec GmbH
+ * Copyright (C) 2018 Himanshu Jha <himanshujha199640@gmail.com>
+ *
+ * Datasheet:
+ * https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BME680-DS001-00.pdf
+ */
+#include <linux/acpi.h>
+#include <linux/bitfield.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/log2.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#include "bme680.h"
+
+struct bme680_calib {
+ u16 par_t1;
+ s16 par_t2;
+ s8 par_t3;
+ u16 par_p1;
+ s16 par_p2;
+ s8 par_p3;
+ s16 par_p4;
+ s16 par_p5;
+ s8 par_p6;
+ s8 par_p7;
+ s16 par_p8;
+ s16 par_p9;
+ u8 par_p10;
+ u16 par_h1;
+ u16 par_h2;
+ s8 par_h3;
+ s8 par_h4;
+ s8 par_h5;
+ s8 par_h6;
+ s8 par_h7;
+ s8 par_gh1;
+ s16 par_gh2;
+ s8 par_gh3;
+ u8 res_heat_range;
+ s8 res_heat_val;
+ s8 range_sw_err;
+};
+
+struct bme680_data {
+ struct regmap *regmap;
+ struct bme680_calib bme680;
+ u8 oversampling_temp;
+ u8 oversampling_press;
+ u8 oversampling_humid;
+ u16 heater_dur;
+ u16 heater_temp;
+ /*
+ * Carryover value from temperature conversion, used in pressure
+ * and humidity compensation calculations.
+ */
+ s32 t_fine;
+};
+
+const struct regmap_config bme680_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+EXPORT_SYMBOL(bme680_regmap_config);
+
+static const struct iio_chan_spec bme680_channels[] = {
+ {
+ .type = IIO_TEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+ },
+ {
+ .type = IIO_PRESSURE,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+ },
+ {
+ .type = IIO_HUMIDITYRELATIVE,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+ },
+ {
+ .type = IIO_RESISTANCE,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ },
+};
+
+static const int bme680_oversampling_avail[] = { 1, 2, 4, 8, 16 };
+
+static int bme680_read_calib(struct bme680_data *data,
+ struct bme680_calib *calib)
+{
+ struct device *dev = regmap_get_device(data->regmap);
+ unsigned int tmp, tmp_msb, tmp_lsb;
+ int ret;
+ __le16 buf;
+
+ /* Temperature related coefficients */
+ ret = regmap_bulk_read(data->regmap, BME680_T1_LSB_REG,
+ (u8 *) &buf, 2);
+ if (ret < 0) {
+ dev_err(dev, "failed to read BME680_T1_LSB_REG\n");
+ return ret;
+ }
+ calib->par_t1 = le16_to_cpu(buf);
+
+ ret = regmap_bulk_read(data->regmap, BME680_T2_LSB_REG,
+ (u8 *) &buf, 2);
+ if (ret < 0) {
+ dev_err(dev, "failed to read BME680_T2_LSB_REG\n");
+ return ret;
+ }
+ calib->par_t2 = le16_to_cpu(buf);
+
+ ret = regmap_read(data->regmap, BME680_T3_REG, &tmp);
+ if (ret < 0) {
+ dev_err(dev, "failed to read BME680_T3_REG\n");
+ return ret;
+ }
+ calib->par_t3 = tmp;
+
+ /* Pressure related coefficients */
+ ret = regmap_bulk_read(data->regmap, BME680_P1_LSB_REG,
+ (u8 *) &buf, 2);
+ if (ret < 0) {
+ dev_err(dev, "failed to read BME680_P1_LSB_REG\n");
+ return ret;
+ }
+ calib->par_p1 = le16_to_cpu(buf);
+
+ ret = regmap_bulk_read(data->regmap, BME680_P2_LSB_REG,
+ (u8 *) &buf, 2);
+ if (ret < 0) {
+ dev_err(dev, "failed to read BME680_P2_LSB_REG\n");
+ return ret;
+ }
+ calib->par_p2 = le16_to_cpu(buf);
+
+ ret = regmap_read(data->regmap, BME680_P3_REG, &tmp);
+ if (ret < 0) {
+ dev_err(dev, "failed to read BME680_P3_REG\n");
+ return ret;
+ }
+ calib->par_p3 = tmp;
+
+ ret = regmap_bulk_read(data->regmap, BME680_P4_LSB_REG,
+ (u8 *) &buf, 2);
+ if (ret < 0) {
+ dev_err(dev, "failed to read BME680_P4_LSB_REG\n");
+ return ret;
+ }
+ calib->par_p4 = le16_to_cpu(buf);
+
+ ret = regmap_bulk_read(data->regmap, BME680_P5_LSB_REG,
+ (u8 *) &buf, 2);
+ if (ret < 0) {
+ dev_err(dev, "failed to read BME680_P5_LSB_REG\n");
+ return ret;
+ }
+ calib->par_p5 = le16_to_cpu(buf);
+
+ ret = regmap_read(data->regmap, BME680_P6_REG, &tmp);
+ if (ret < 0) {
+ dev_err(dev, "failed to read BME680_P6_REG\n");
+ return ret;
+ }
+ calib->par_p6 = tmp;
+
+ ret = regmap_read(data->regmap, BME680_P7_REG, &tmp);
+ if (ret < 0) {
+ dev_err(dev, "failed to read BME680_P7_REG\n");
+ return ret;
+ }
+ calib->par_p7 = tmp;
+
+ ret = regmap_bulk_read(data->regmap, BME680_P8_LSB_REG,
+ (u8 *) &buf, 2);
+ if (ret < 0) {
+ dev_err(dev, "failed to read BME680_P8_LSB_REG\n");
+ return ret;
+ }
+ calib->par_p8 = le16_to_cpu(buf);
+
+ ret = regmap_bulk_read(data->regmap, BME680_P9_LSB_REG,
+ (u8 *) &buf, 2);
+ if (ret < 0) {
+ dev_err(dev, "failed to read BME680_P9_LSB_REG\n");
+ return ret;
+ }
+ calib->par_p9 = le16_to_cpu(buf);
+
+ ret = regmap_read(data->regmap, BME680_P10_REG, &tmp);
+ if (ret < 0) {
+ dev_err(dev, "failed to read BME680_P10_REG\n");
+ return ret;
+ }
+ calib->par_p10 = tmp;
+
+ /* Humidity related coefficients */
+ ret = regmap_read(data->regmap, BME680_H1_MSB_REG, &tmp_msb);
+ if (ret < 0) {
+ dev_err(dev, "failed to read BME680_H1_MSB_REG\n");
+ return ret;
+ }
+
+ ret = regmap_read(data->regmap, BME680_H1_LSB_REG, &tmp_lsb);
+ if (ret < 0) {
+ dev_err(dev, "failed to read BME680_H1_LSB_REG\n");
+ return ret;
+ }
+
+ calib->par_h1 = (tmp_msb << BME680_HUM_REG_SHIFT_VAL) |
+ (tmp_lsb & BME680_BIT_H1_DATA_MSK);
+
+ ret = regmap_read(data->regmap, BME680_H2_MSB_REG, &tmp_msb);
+ if (ret < 0) {
+ dev_err(dev, "failed to read BME680_H2_MSB_REG\n");
+ return ret;
+ }
+
+ ret = regmap_read(data->regmap, BME680_H2_LSB_REG, &tmp_lsb);
+ if (ret < 0) {
+ dev_err(dev, "failed to read BME680_H2_LSB_REG\n");
+ return ret;
+ }
+
+ calib->par_h2 = (tmp_msb << BME680_HUM_REG_SHIFT_VAL) |
+ (tmp_lsb >> BME680_HUM_REG_SHIFT_VAL);
+
+ ret = regmap_read(data->regmap, BME680_H3_REG, &tmp);
+ if (ret < 0) {
+ dev_err(dev, "failed to read BME680_H3_REG\n");
+ return ret;
+ }
+ calib->par_h3 = tmp;
+
+ ret = regmap_read(data->regmap, BME680_H4_REG, &tmp);
+ if (ret < 0) {
+ dev_err(dev, "failed to read BME680_H4_REG\n");
+ return ret;
+ }
+ calib->par_h4 = tmp;
+
+ ret = regmap_read(data->regmap, BME680_H5_REG, &tmp);
+ if (ret < 0) {
+ dev_err(dev, "failed to read BME680_H5_REG\n");
+ return ret;
+ }
+ calib->par_h5 = tmp;
+
+ ret = regmap_read(data->regmap, BME680_H6_REG, &tmp);
+ if (ret < 0) {
+ dev_err(dev, "failed to read BME680_H6_REG\n");
+ return ret;
+ }
+ calib->par_h6 = tmp;
+
+ ret = regmap_read(data->regmap, BME680_H7_REG, &tmp);
+ if (ret < 0) {
+ dev_err(dev, "failed to read BME680_H7_REG\n");
+ return ret;
+ }
+ calib->par_h7 = tmp;
+
+ /* Gas heater related coefficients */
+ ret = regmap_read(data->regmap, BME680_GH1_REG, &tmp);
+ if (ret < 0) {
+ dev_err(dev, "failed to read BME680_GH1_REG\n");
+ return ret;
+ }
+ calib->par_gh1 = tmp;
+
+ ret = regmap_bulk_read(data->regmap, BME680_GH2_LSB_REG,
+ (u8 *) &buf, 2);
+ if (ret < 0) {
+ dev_err(dev, "failed to read BME680_GH2_LSB_REG\n");
+ return ret;
+ }
+ calib->par_gh2 = le16_to_cpu(buf);
+
+ ret = regmap_read(data->regmap, BME680_GH3_REG, &tmp);
+ if (ret < 0) {
+ dev_err(dev, "failed to read BME680_GH3_REG\n");
+ return ret;
+ }
+ calib->par_gh3 = tmp;
+
+ /* Other coefficients */
+ ret = regmap_read(data->regmap, BME680_REG_RES_HEAT_RANGE, &tmp);
+ if (ret < 0) {
+ dev_err(dev, "failed to read resistance heat range\n");
+ return ret;
+ }
+ calib->res_heat_range = (tmp & BME680_RHRANGE_MSK) / 16;
+
+ ret = regmap_read(data->regmap, BME680_REG_RES_HEAT_VAL, &tmp);
+ if (ret < 0) {
+ dev_err(dev, "failed to read resistance heat value\n");
+ return ret;
+ }
+ calib->res_heat_val = tmp;
+
+ ret = regmap_read(data->regmap, BME680_REG_RANGE_SW_ERR, &tmp);
+ if (ret < 0) {
+ dev_err(dev, "failed to read range software error\n");
+ return ret;
+ }
+ calib->range_sw_err = (tmp & BME680_RSERROR_MSK) / 16;
+
+ return 0;
+}
+
+/*
+ * Taken from Bosch BME680 API:
+ * https://github.com/BoschSensortec/BME680_driver/blob/63bb5336/bme680.c#L876
+ *
+ * Returns temperature measurement in DegC, resolutions is 0.01 DegC. Therefore,
+ * output value of "3233" represents 32.33 DegC.
+ */
+static s16 bme680_compensate_temp(struct bme680_data *data,
+ s32 adc_temp)
+{
+ struct bme680_calib *calib = &data->bme680;
+ s64 var1, var2, var3;
+ s16 calc_temp;
+
+ var1 = (adc_temp >> 3) - (calib->par_t1 << 1);
+ var2 = (var1 * calib->par_t2) >> 11;
+ var3 = ((var1 >> 1) * (var1 >> 1)) >> 12;
+ var3 = (var3 * (calib->par_t3 << 4)) >> 14;
+ data->t_fine = var2 + var3;
+ calc_temp = (data->t_fine * 5 + 128) >> 8;
+
+ return calc_temp;
+}
+
+/*
+ * Taken from Bosch BME680 API:
+ * https://github.com/BoschSensortec/BME680_driver/blob/63bb5336/bme680.c#L896
+ *
+ * Returns pressure measurement in Pa. Output value of "97356" represents
+ * 97356 Pa = 973.56 hPa.
+ */
+static u32 bme680_compensate_press(struct bme680_data *data,
+ u32 adc_press)
+{
+ struct bme680_calib *calib = &data->bme680;
+ s32 var1, var2, var3, press_comp;
+
+ var1 = (data->t_fine >> 1) - 64000;
+ var2 = ((((var1 >> 2) * (var1 >> 2)) >> 11) * calib->par_p6) >> 2;
+ var2 = var2 + (var1 * calib->par_p5 << 1);
+ var2 = (var2 >> 2) + (calib->par_p4 << 16);
+ var1 = (((((var1 >> 2) * (var1 >> 2)) >> 13) *
+ (calib->par_p3 << 5)) >> 3) +
+ ((calib->par_p2 * var1) >> 1);
+ var1 = var1 >> 18;
+ var1 = ((32768 + var1) * calib->par_p1) >> 15;
+ press_comp = 1048576 - adc_press;
+ press_comp = ((press_comp - (var2 >> 12)) * 3125);
+
+ if (press_comp >= BME680_MAX_OVERFLOW_VAL)
+ press_comp = ((press_comp / (u32)var1) << 1);
+ else
+ press_comp = ((press_comp << 1) / (u32)var1);
+
+ var1 = (calib->par_p9 * (((press_comp >> 3) *
+ (press_comp >> 3)) >> 13)) >> 12;
+ var2 = ((press_comp >> 2) * calib->par_p8) >> 13;
+ var3 = ((press_comp >> 8) * (press_comp >> 8) *
+ (press_comp >> 8) * calib->par_p10) >> 17;
+
+ press_comp += (var1 + var2 + var3 + (calib->par_p7 << 7)) >> 4;
+
+ return press_comp;
+}
+
+/*
+ * Taken from Bosch BME680 API:
+ * https://github.com/BoschSensortec/BME680_driver/blob/63bb5336/bme680.c#L937
+ *
+ * Returns humidity measurement in percent, resolution is 0.001 percent. Output
+ * value of "43215" represents 43.215 %rH.
+ */
+static u32 bme680_compensate_humid(struct bme680_data *data,
+ u16 adc_humid)
+{
+ struct bme680_calib *calib = &data->bme680;
+ s32 var1, var2, var3, var4, var5, var6, temp_scaled, calc_hum;
+
+ temp_scaled = (data->t_fine * 5 + 128) >> 8;
+ var1 = (adc_humid - ((s32) ((s32) calib->par_h1 * 16))) -
+ (((temp_scaled * (s32) calib->par_h3) / 100) >> 1);
+ var2 = ((s32) calib->par_h2 *
+ (((temp_scaled * calib->par_h4) / 100) +
+ (((temp_scaled * ((temp_scaled * calib->par_h5) / 100))
+ >> 6) / 100) + (1 << 14))) >> 10;
+ var3 = var1 * var2;
+ var4 = calib->par_h6 << 7;
+ var4 = (var4 + ((temp_scaled * calib->par_h7) / 100)) >> 4;
+ var5 = ((var3 >> 14) * (var3 >> 14)) >> 10;
+ var6 = (var4 * var5) >> 1;
+ calc_hum = (((var3 + var6) >> 10) * 1000) >> 12;
+
+ if (calc_hum > 100000) /* Cap at 100%rH */
+ calc_hum = 100000;
+ else if (calc_hum < 0)
+ calc_hum = 0;
+
+ return calc_hum;
+}
+
+/*
+ * Taken from Bosch BME680 API:
+ * https://github.com/BoschSensortec/BME680_driver/blob/63bb5336/bme680.c#L973
+ *
+ * Returns gas measurement in Ohm. Output value of "82986" represent 82986 ohms.
+ */
+static u32 bme680_compensate_gas(struct bme680_data *data, u16 gas_res_adc,
+ u8 gas_range)
+{
+ struct bme680_calib *calib = &data->bme680;
+ s64 var1;
+ u64 var2;
+ s64 var3;
+ u32 calc_gas_res;
+
+ /* Look up table for the possible gas range values */
+ const u32 lookupTable[16] = {2147483647u, 2147483647u,
+ 2147483647u, 2147483647u, 2147483647u,
+ 2126008810u, 2147483647u, 2130303777u,
+ 2147483647u, 2147483647u, 2143188679u,
+ 2136746228u, 2147483647u, 2126008810u,
+ 2147483647u, 2147483647u};
+
+ var1 = ((1340 + (5 * (s64) calib->range_sw_err)) *
+ ((s64) lookupTable[gas_range])) >> 16;
+ var2 = ((gas_res_adc << 15) - 16777216) + var1;
+ var3 = ((125000 << (15 - gas_range)) * var1) >> 9;
+ var3 += (var2 >> 1);
+ calc_gas_res = div64_s64(var3, (s64) var2);
+
+ return calc_gas_res;
+}
+
+/*
+ * Taken from Bosch BME680 API:
+ * https://github.com/BoschSensortec/BME680_driver/blob/63bb5336/bme680.c#L1002
+ */
+static u8 bme680_calc_heater_res(struct bme680_data *data, u16 temp)
+{
+ struct bme680_calib *calib = &data->bme680;
+ s32 var1, var2, var3, var4, var5, heatr_res_x100;
+ u8 heatr_res;
+
+ if (temp > 400) /* Cap temperature */
+ temp = 400;
+
+ var1 = (((s32) BME680_AMB_TEMP * calib->par_gh3) / 1000) * 256;
+ var2 = (calib->par_gh1 + 784) * (((((calib->par_gh2 + 154009) *
+ temp * 5) / 100)
+ + 3276800) / 10);
+ var3 = var1 + (var2 / 2);
+ var4 = (var3 / (calib->res_heat_range + 4));
+ var5 = 131 * calib->res_heat_val + 65536;
+ heatr_res_x100 = ((var4 / var5) - 250) * 34;
+ heatr_res = (heatr_res_x100 + 50) / 100;
+
+ return heatr_res;
+}
+
+/*
+ * Taken from Bosch BME680 API:
+ * https://github.com/BoschSensortec/BME680_driver/blob/63bb5336/bme680.c#L1188
+ */
+static u8 bme680_calc_heater_dur(u16 dur)
+{
+ u8 durval, factor = 0;
+
+ if (dur >= 0xfc0) {
+ durval = 0xff; /* Max duration */
+ } else {
+ while (dur > 0x3F) {
+ dur = dur / 4;
+ factor += 1;
+ }
+ durval = dur + (factor * 64);
+ }
+
+ return durval;
+}
+
+static int bme680_set_mode(struct bme680_data *data, bool mode)
+{
+ struct device *dev = regmap_get_device(data->regmap);
+ int ret;
+
+ if (mode) {
+ ret = regmap_write_bits(data->regmap, BME680_REG_CTRL_MEAS,
+ BME680_MODE_MASK, BME680_MODE_FORCED);
+ if (ret < 0)
+ dev_err(dev, "failed to set forced mode\n");
+
+ } else {
+ ret = regmap_write_bits(data->regmap, BME680_REG_CTRL_MEAS,
+ BME680_MODE_MASK, BME680_MODE_SLEEP);
+ if (ret < 0)
+ dev_err(dev, "failed to set sleep mode\n");
+
+ }
+
+ return ret;
+}
+
+static int bme680_chip_config(struct bme680_data *data)
+{
+ struct device *dev = regmap_get_device(data->regmap);
+ int ret;
+ u8 osrs = FIELD_PREP(BME680_OSRS_HUMIDITY_MASK,
+ data->oversampling_humid + 1);
+ /*
+ * Highly recommended to set oversampling of humidity before
+ * temperature/pressure oversampling.
+ */
+ ret = regmap_update_bits(data->regmap, BME680_REG_CTRL_HUMIDITY,
+ BME680_OSRS_HUMIDITY_MASK, osrs);
+ if (ret < 0) {
+ dev_err(dev, "failed to write ctrl_hum register\n");
+ return ret;
+ }
+
+ /* IIR filter settings */
+ ret = regmap_update_bits(data->regmap, BME680_REG_CONFIG,
+ BME680_FILTER_MASK,
+ BME680_FILTER_COEFF_VAL);
+ if (ret < 0) {
+ dev_err(dev, "failed to write config register\n");
+ return ret;
+ }
+
+ osrs = FIELD_PREP(BME680_OSRS_TEMP_MASK, data->oversampling_temp + 1) |
+ FIELD_PREP(BME680_OSRS_PRESS_MASK, data->oversampling_press + 1);
+
+ ret = regmap_write_bits(data->regmap, BME680_REG_CTRL_MEAS,
+ BME680_OSRS_TEMP_MASK |
+ BME680_OSRS_PRESS_MASK,
+ osrs);
+ if (ret < 0)
+ dev_err(dev, "failed to write ctrl_meas register\n");
+
+ return ret;
+}
+
+static int bme680_gas_config(struct bme680_data *data)
+{
+ struct device *dev = regmap_get_device(data->regmap);
+ int ret;
+ u8 heatr_res, heatr_dur;
+
+ heatr_res = bme680_calc_heater_res(data, data->heater_temp);
+
+ /* set target heater temperature */
+ ret = regmap_write(data->regmap, BME680_REG_RES_HEAT_0, heatr_res);
+ if (ret < 0) {
+ dev_err(dev, "failed to write res_heat_0 register\n");
+ return ret;
+ }
+
+ heatr_dur = bme680_calc_heater_dur(data->heater_dur);
+
+ /* set target heating duration */
+ ret = regmap_write(data->regmap, BME680_REG_GAS_WAIT_0, heatr_dur);
+ if (ret < 0) {
+ dev_err(dev, "failted to write gas_wait_0 register\n");
+ return ret;
+ }
+
+ /* Selecting the runGas and NB conversion settings for the sensor */
+ ret = regmap_update_bits(data->regmap, BME680_REG_CTRL_GAS_1,
+ BME680_RUN_GAS_MASK | BME680_NB_CONV_MASK,
+ BME680_RUN_GAS_EN_BIT | BME680_NB_CONV_0_VAL);
+ if (ret < 0)
+ dev_err(dev, "failed to write ctrl_gas_1 register\n");
+
+ return ret;
+}
+
+static int bme680_read_temp(struct bme680_data *data,
+ int *val, int *val2)
+{
+ struct device *dev = regmap_get_device(data->regmap);
+ int ret;
+ __be32 tmp = 0;
+ s32 adc_temp;
+ s16 comp_temp;
+
+ /* set forced mode to trigger measurement */
+ ret = bme680_set_mode(data, true);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_bulk_read(data->regmap, BME680_REG_TEMP_MSB,
+ (u8 *) &tmp, 3);
+ if (ret < 0) {
+ dev_err(dev, "failed to read temperature\n");
+ return ret;
+ }
+
+ adc_temp = be32_to_cpu(tmp) >> 12;
+ if (adc_temp == BME680_MEAS_SKIPPED) {
+ /* reading was skipped */
+ dev_err(dev, "reading temperature skipped\n");
+ return -EINVAL;
+ }
+ comp_temp = bme680_compensate_temp(data, adc_temp);
+ /*
+ * val might be NULL if we're called by the read_press/read_humid
+ * routine which is callled to get t_fine value used in
+ * compensate_press/compensate_humid to get compensated
+ * pressure/humidity readings.
+ */
+ if (val && val2) {
+ *val = comp_temp;
+ *val2 = 100;
+ return IIO_VAL_FRACTIONAL;
+ }
+
+ return ret;
+}
+
+static int bme680_read_press(struct bme680_data *data,
+ int *val, int *val2)
+{
+ struct device *dev = regmap_get_device(data->regmap);
+ int ret;
+ __be32 tmp = 0;
+ s32 adc_press;
+
+ /* Read and compensate temperature to get a reading of t_fine */
+ ret = bme680_read_temp(data, NULL, NULL);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_bulk_read(data->regmap, BME680_REG_PRESS_MSB,
+ (u8 *) &tmp, 3);
+ if (ret < 0) {
+ dev_err(dev, "failed to read pressure\n");
+ return ret;
+ }
+
+ adc_press = be32_to_cpu(tmp) >> 12;
+ if (adc_press == BME680_MEAS_SKIPPED) {
+ /* reading was skipped */
+ dev_err(dev, "reading pressure skipped\n");
+ return -EINVAL;
+ }
+
+ *val = bme680_compensate_press(data, adc_press);
+ *val2 = 100;
+ return IIO_VAL_FRACTIONAL;
+}
+
+static int bme680_read_humid(struct bme680_data *data,
+ int *val, int *val2)
+{
+ struct device *dev = regmap_get_device(data->regmap);
+ int ret;
+ __be16 tmp = 0;
+ s32 adc_humidity;
+ u32 comp_humidity;
+
+ /* Read and compensate temperature to get a reading of t_fine */
+ ret = bme680_read_temp(data, NULL, NULL);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_bulk_read(data->regmap, BM6880_REG_HUMIDITY_MSB,
+ (u8 *) &tmp, 2);
+ if (ret < 0) {
+ dev_err(dev, "failed to read humidity\n");
+ return ret;
+ }
+
+ adc_humidity = be16_to_cpu(tmp);
+ if (adc_humidity == BME680_MEAS_SKIPPED) {
+ /* reading was skipped */
+ dev_err(dev, "reading humidity skipped\n");
+ return -EINVAL;
+ }
+ comp_humidity = bme680_compensate_humid(data, adc_humidity);
+
+ *val = comp_humidity;
+ *val2 = 1000;
+ return IIO_VAL_FRACTIONAL;
+}
+
+static int bme680_read_gas(struct bme680_data *data,
+ int *val)
+{
+ struct device *dev = regmap_get_device(data->regmap);
+ int ret;
+ __be16 tmp = 0;
+ unsigned int check;
+ u16 adc_gas_res;
+ u8 gas_range;
+
+ /* Set heater settings */
+ ret = bme680_gas_config(data);
+ if (ret < 0) {
+ dev_err(dev, "failed to set gas config\n");
+ return ret;
+ }
+
+ /* set forced mode to trigger measurement */
+ ret = bme680_set_mode(data, true);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_read(data->regmap, BME680_REG_MEAS_STAT_0, &check);
+ if (check & BME680_GAS_MEAS_BIT) {
+ dev_err(dev, "gas measurement incomplete\n");
+ return -EBUSY;
+ }
+
+ ret = regmap_read(data->regmap, BME680_REG_GAS_R_LSB, &check);
+ if (ret < 0) {
+ dev_err(dev, "failed to read gas_r_lsb register\n");
+ return ret;
+ }
+
+ /*
+ * occurs if either the gas heating duration was insuffient
+ * to reach the target heater temperature or the target
+ * heater temperature was too high for the heater sink to
+ * reach.
+ */
+ if ((check & BME680_GAS_STAB_BIT) == 0) {
+ dev_err(dev, "heater failed to reach the target temperature\n");
+ return -EINVAL;
+ }
+
+ ret = regmap_bulk_read(data->regmap, BME680_REG_GAS_MSB,
+ (u8 *) &tmp, 2);
+ if (ret < 0) {
+ dev_err(dev, "failed to read gas resistance\n");
+ return ret;
+ }
+
+ gas_range = check & BME680_GAS_RANGE_MASK;
+ adc_gas_res = be16_to_cpu(tmp) >> BME680_ADC_GAS_RES_SHIFT;
+
+ *val = bme680_compensate_gas(data, adc_gas_res, gas_range);
+ return IIO_VAL_INT;
+}
+
+static int bme680_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct bme680_data *data = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_PROCESSED:
+ switch (chan->type) {
+ case IIO_TEMP:
+ return bme680_read_temp(data, val, val2);
+ case IIO_PRESSURE:
+ return bme680_read_press(data, val, val2);
+ case IIO_HUMIDITYRELATIVE:
+ return bme680_read_humid(data, val, val2);
+ case IIO_RESISTANCE:
+ return bme680_read_gas(data, val);
+ default:
+ return -EINVAL;
+ }
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ switch (chan->type) {
+ case IIO_TEMP:
+ *val = 1 << data->oversampling_temp;
+ return IIO_VAL_INT;
+ case IIO_PRESSURE:
+ *val = 1 << data->oversampling_press;
+ return IIO_VAL_INT;
+ case IIO_HUMIDITYRELATIVE:
+ *val = 1 << data->oversampling_humid;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+ default:
+ return -EINVAL;
+ }
+}
+
+static int bme680_write_oversampling_ratio_temp(struct bme680_data *data,
+ int val)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(bme680_oversampling_avail); i++) {
+ if (bme680_oversampling_avail[i] == val) {
+ data->oversampling_temp = ilog2(val);
+
+ return bme680_chip_config(data);
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int bme680_write_oversampling_ratio_press(struct bme680_data *data,
+ int val)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(bme680_oversampling_avail); i++) {
+ if (bme680_oversampling_avail[i] == val) {
+ data->oversampling_press = ilog2(val);
+
+ return bme680_chip_config(data);
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int bme680_write_oversampling_ratio_humid(struct bme680_data *data,
+ int val)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(bme680_oversampling_avail); i++) {
+ if (bme680_oversampling_avail[i] == val) {
+ data->oversampling_humid = ilog2(val);
+
+ return bme680_chip_config(data);
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int bme680_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct bme680_data *data = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ switch (chan->type) {
+ case IIO_TEMP:
+ return bme680_write_oversampling_ratio_temp(data, val);
+ case IIO_PRESSURE:
+ return bme680_write_oversampling_ratio_press(data, val);
+ case IIO_HUMIDITYRELATIVE:
+ return bme680_write_oversampling_ratio_humid(data, val);
+ default:
+ return -EINVAL;
+ }
+ default:
+ return -EINVAL;
+ }
+}
+
+static const char bme680_oversampling_ratio_show[] = "1 2 4 8 16";
+
+static IIO_CONST_ATTR(oversampling_ratio_available,
+ bme680_oversampling_ratio_show);
+
+static struct attribute *bme680_attributes[] = {
+ &iio_const_attr_oversampling_ratio_available.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group bme680_attribute_group = {
+ .attrs = bme680_attributes,
+};
+
+static const struct iio_info bme680_info = {
+ .read_raw = &bme680_read_raw,
+ .write_raw = &bme680_write_raw,
+ .attrs = &bme680_attribute_group,
+};
+
+static const char *bme680_match_acpi_device(struct device *dev)
+{
+ const struct acpi_device_id *id;
+
+ id = acpi_match_device(dev->driver->acpi_match_table, dev);
+ if (!id)
+ return NULL;
+
+ return dev_name(dev);
+}
+
+int bme680_core_probe(struct device *dev, struct regmap *regmap,
+ const char *name)
+{
+ struct iio_dev *indio_dev;
+ struct bme680_data *data;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ if (!name && ACPI_HANDLE(dev))
+ name = bme680_match_acpi_device(dev);
+
+ data = iio_priv(indio_dev);
+ dev_set_drvdata(dev, indio_dev);
+ data->regmap = regmap;
+ indio_dev->dev.parent = dev;
+ indio_dev->name = name;
+ indio_dev->channels = bme680_channels;
+ indio_dev->num_channels = ARRAY_SIZE(bme680_channels);
+ indio_dev->info = &bme680_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ /* default values for the sensor */
+ data->oversampling_humid = ilog2(2); /* 2X oversampling rate */
+ data->oversampling_press = ilog2(4); /* 4X oversampling rate */
+ data->oversampling_temp = ilog2(8); /* 8X oversampling rate */
+ data->heater_temp = 320; /* degree Celsius */
+ data->heater_dur = 150; /* milliseconds */
+
+ ret = bme680_chip_config(data);
+ if (ret < 0) {
+ dev_err(dev, "failed to set chip_config data\n");
+ return ret;
+ }
+
+ ret = bme680_gas_config(data);
+ if (ret < 0) {
+ dev_err(dev, "failed to set gas config data\n");
+ return ret;
+ }
+
+ ret = bme680_read_calib(data, &data->bme680);
+ if (ret < 0) {
+ dev_err(dev,
+ "failed to read calibration coefficients at probe\n");
+ return ret;
+ }
+
+ return devm_iio_device_register(dev, indio_dev);
+}
+EXPORT_SYMBOL_GPL(bme680_core_probe);
+
+MODULE_AUTHOR("Himanshu Jha <himanshujha199640@gmail.com>");
+MODULE_DESCRIPTION("Bosch BME680 Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/chemical/bme680_i2c.c b/drivers/iio/chemical/bme680_i2c.c
new file mode 100644
index 000000000000..06d4be539d2e
--- /dev/null
+++ b/drivers/iio/chemical/bme680_i2c.c
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * BME680 - I2C Driver
+ *
+ * Copyright (C) 2018 Himanshu Jha <himanshujha199640@gmail.com>
+ *
+ * 7-Bit I2C slave address is:
+ * - 0x76 if SDO is pulled to GND
+ * - 0x77 if SDO is pulled to VDDIO
+ *
+ * Note: SDO pin cannot be left floating otherwise I2C address
+ * will be undefined.
+ */
+#include <linux/acpi.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "bme680.h"
+
+static int bme680_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct regmap *regmap;
+ const char *name = NULL;
+ unsigned int val;
+ int ret;
+
+ regmap = devm_regmap_init_i2c(client, &bme680_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(&client->dev, "Failed to register i2c regmap %d\n",
+ (int)PTR_ERR(regmap));
+ return PTR_ERR(regmap);
+ }
+
+ ret = regmap_write(regmap, BME680_REG_SOFT_RESET_I2C,
+ BME680_CMD_SOFTRESET);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to reset chip\n");
+ return ret;
+ }
+
+ ret = regmap_read(regmap, BME680_REG_CHIP_I2C_ID, &val);
+ if (ret < 0) {
+ dev_err(&client->dev, "Error reading I2C chip ID\n");
+ return ret;
+ }
+
+ if (val != BME680_CHIP_ID_VAL) {
+ dev_err(&client->dev, "Wrong chip ID, got %x expected %x\n",
+ val, BME680_CHIP_ID_VAL);
+ return -ENODEV;
+ }
+
+ if (id)
+ name = id->name;
+
+ return bme680_core_probe(&client->dev, regmap, name);
+}
+
+static const struct i2c_device_id bme680_i2c_id[] = {
+ {"bme680", 0},
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, bme680_i2c_id);
+
+static const struct acpi_device_id bme680_acpi_match[] = {
+ {"BME0680", 0},
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, bme680_acpi_match);
+
+static struct i2c_driver bme680_i2c_driver = {
+ .driver = {
+ .name = "bme680_i2c",
+ .acpi_match_table = ACPI_PTR(bme680_acpi_match),
+ },
+ .probe = bme680_i2c_probe,
+ .id_table = bme680_i2c_id,
+};
+module_i2c_driver(bme680_i2c_driver);
+
+MODULE_AUTHOR("Himanshu Jha <himanshujha199640@gmail.com>");
+MODULE_DESCRIPTION("BME680 I2C driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/chemical/bme680_spi.c b/drivers/iio/chemical/bme680_spi.c
new file mode 100644
index 000000000000..c9fb05e8d0b9
--- /dev/null
+++ b/drivers/iio/chemical/bme680_spi.c
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * BME680 - SPI Driver
+ *
+ * Copyright (C) 2018 Himanshu Jha <himanshujha199640@gmail.com>
+ */
+#include <linux/acpi.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#include "bme680.h"
+
+static int bme680_regmap_spi_write(void *context, const void *data,
+ size_t count)
+{
+ struct spi_device *spi = context;
+ u8 buf[2];
+
+ memcpy(buf, data, 2);
+ /*
+ * The SPI register address (= full register address without bit 7)
+ * and the write command (bit7 = RW = '0')
+ */
+ buf[0] &= ~0x80;
+
+ return spi_write_then_read(spi, buf, 2, NULL, 0);
+}
+
+static int bme680_regmap_spi_read(void *context, const void *reg,
+ size_t reg_size, void *val, size_t val_size)
+{
+ struct spi_device *spi = context;
+
+ return spi_write_then_read(spi, reg, reg_size, val, val_size);
+}
+
+static struct regmap_bus bme680_regmap_bus = {
+ .write = bme680_regmap_spi_write,
+ .read = bme680_regmap_spi_read,
+ .reg_format_endian_default = REGMAP_ENDIAN_BIG,
+ .val_format_endian_default = REGMAP_ENDIAN_BIG,
+};
+
+static int bme680_spi_probe(struct spi_device *spi)
+{
+ const struct spi_device_id *id = spi_get_device_id(spi);
+ struct regmap *regmap;
+ unsigned int val;
+ int ret;
+
+ spi->bits_per_word = 8;
+ ret = spi_setup(spi);
+ if (ret < 0) {
+ dev_err(&spi->dev, "spi_setup failed!\n");
+ return ret;
+ }
+
+ regmap = devm_regmap_init(&spi->dev, &bme680_regmap_bus,
+ &spi->dev, &bme680_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(&spi->dev, "Failed to register spi regmap %d\n",
+ (int)PTR_ERR(regmap));
+ return PTR_ERR(regmap);
+ }
+
+ ret = regmap_write(regmap, BME680_REG_SOFT_RESET_SPI,
+ BME680_CMD_SOFTRESET);
+ if (ret < 0) {
+ dev_err(&spi->dev, "Failed to reset chip\n");
+ return ret;
+ }
+
+ /* after power-on reset, Page 0(0x80-0xFF) of spi_mem_page is active */
+ ret = regmap_read(regmap, BME680_REG_CHIP_SPI_ID, &val);
+ if (ret < 0) {
+ dev_err(&spi->dev, "Error reading SPI chip ID\n");
+ return ret;
+ }
+
+ if (val != BME680_CHIP_ID_VAL) {
+ dev_err(&spi->dev, "Wrong chip ID, got %x expected %x\n",
+ val, BME680_CHIP_ID_VAL);
+ return -ENODEV;
+ }
+ /*
+ * select Page 1 of spi_mem_page to enable access to
+ * to registers from address 0x00 to 0x7F.
+ */
+ ret = regmap_write_bits(regmap, BME680_REG_STATUS,
+ BME680_SPI_MEM_PAGE_BIT,
+ BME680_SPI_MEM_PAGE_1_VAL);
+ if (ret < 0) {
+ dev_err(&spi->dev, "failed to set page 1 of spi_mem_page\n");
+ return ret;
+ }
+
+ return bme680_core_probe(&spi->dev, regmap, id->name);
+}
+
+static const struct spi_device_id bme680_spi_id[] = {
+ {"bme680", 0},
+ {},
+};
+MODULE_DEVICE_TABLE(spi, bme680_spi_id);
+
+static const struct acpi_device_id bme680_acpi_match[] = {
+ {"BME0680", 0},
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, bme680_acpi_match);
+
+static struct spi_driver bme680_spi_driver = {
+ .driver = {
+ .name = "bme680_spi",
+ .acpi_match_table = ACPI_PTR(bme680_acpi_match),
+ },
+ .probe = bme680_spi_probe,
+ .id_table = bme680_spi_id,
+};
+module_spi_driver(bme680_spi_driver);
+
+MODULE_AUTHOR("Himanshu Jha <himanshujha199640@gmail.com>");
+MODULE_DESCRIPTION("Bosch BME680 SPI driver");
+MODULE_LICENSE("GPL v2");
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-06 12:19:47 +0300